diff --git a/CHANGELOG.md b/CHANGELOG.md
index fd051a3..8580d02 100644
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -5,6 +5,47 @@ Format follows [Keep a Changelog](https://keepachangelog.com/en/1.1.0/); version
 
 ## [Unreleased]
 
+### Security
+
+- **Postfix and OpenDKIM could stop every program in the container.** The
+  supervisord control socket was open to the group the two share with the
+  panel for files under `/data`; it is now a group of its own, the panel's
+  alone (audit 2026-10-12, M17).
+- **Postfix accepted TLS 1.0, answered VRFY and named its distribution.**
+  It takes TLS 1.2 at least, opportunistic or required, and asks it of an
+  inbound domain's upstream where TLS is required; VRFY no longer says
+  which recipients port 25 accepts; the banner is `<hostname> ESMTP`
+  (audit 2026-10-12, L31).
+- **A From: added on the way could sit above the signed one.** OpenDKIM now
+  signs From: once more than it is present, so an added one breaks the
+  signature, and canonicalises the header fields relaxed, so a relay that
+  refolds them does not (audit 2026-10-12, L30).
+
+### Fixed
+
+- **OpenDKIM's errors went nowhere.** It logs through syslog(3) alone, and
+  nothing in the container listened on `/dev/log`. A small relay program
+  (the panel's binary, `-syslog-relay`) passes those lines to the container
+  log, marked `syslog:`, errors as such, at most 200 a second (audit
+  2026-10-12, L30).
+- **A non-numeric rate limit, size limit or milter timeout killed every
+  smtpd** at its first connection after `postfix check` had passed it, and a
+  zero window or timeout the rate limiter or smtpd. The start now stops with
+  the variable's name and what it must be (audit 2026-10-12, L31).
+- **`mail.log` was never rotated on a host that recreates the container
+  daily.** logrotate kept its state inside the container, so each new
+  container took the log for rotated today. The state is now under
+  `/data/log` (audit 2026-10-12, M19).
+- **A program that crashed after its first second was restarted for ever.**
+  supervisord gives up only on crashes during start-up; the container is now
+  restarted when a program of the mail path exits unexpectedly five times in
+  ten minutes, as it is when it gives up (audit 2026-10-12, L32).
+- **`deploy/traefik/extract-cert.sh` could replace the certificate with two
+  empty files** when `acme.json` did not hold the domain, and exited 0. It
+  now refuses anything that is not PEM, writes the new files beside the old
+  ones and renames them whole, owner-only until then, with the group the
+  old files had (audit 2026-10-12, M21). It needs bash.
+
 ## [2.5.4] - 2026-10-15
 
 Stage 4 of the 2026-10-12 audit: the panel's behaviour. Signing in tells
diff --git a/build/crashexit.py b/build/crashexit.py
index b0f1a33..23db510 100644
--- a/build/crashexit.py
+++ b/build/crashexit.py
@@ -2,32 +2,51 @@
 """Supervisor event listener: bring the container down on unrecoverable failure.
 
 If a managed program of the mail path exhausts its restart retries and
-enters FATAL, this listener signals supervisord (its parent) to terminate, so
-the whole container exits and Docker's `restart` policy starts it again —
-rather than lingering "alive" with a dead Postfix/OpenDKIM/panel. logrotate is
-not on the mail path: its FATAL (a config it would ignore) stays on
-Server > Health, and mail keeps flowing (assumptions C-V5).
+enters FATAL, or keeps crashing - CRASH_LIMIT unexpected exits within
+CRASH_WINDOW seconds - this listener signals supervisord (its parent) to
+terminate, so the whole container exits and Docker's `restart` policy starts it
+again, rather than lingering "alive" with a dead Postfix/OpenDKIM/panel.
+FATAL alone did not cover the second: a program reaches FATAL only through
+exits before its startsecs, and one that crashed after it was restarted for
+ever (audit 2026-10-12, L32; supervisor 4.2.5, supervisor/process.py,
+Subprocess.finish()). logrotate is not on the mail path: its FATAL (a config
+it would ignore) stays on Server > Health, and mail keeps flowing
+(assumptions C-V5).
 
 Communication with supervisord uses the event listener protocol over stdin and
 stdout, so stdout must carry only protocol tokens.
 
 supervisor 4.2.5, docs/events.rst, "Event Listener Notification Protocol": the
 listener writes READY\\n, reads one header line of key:value tokens whose len
-is the payload's length, reads the payload, and answers "RESULT 2\\nOK".
-A PROCESS_STATE_FATAL payload is a token set, "processname:cat groupname:cat
-from_state:BACKOFF" (docs/events.rst; supervisor/events.py,
-ProcessStateEvent.payload()).
+is the payload's length and eventname the event's type, reads the payload, and
+answers "RESULT 2\\nOK". A PROCESS_STATE_FATAL payload is a token set,
+"processname:cat groupname:cat from_state:BACKOFF"; a PROCESS_STATE_EXITED one
+adds "expected:0" for an exit code the program's exitcodes do not list, "1"
+otherwise (docs/events.rst; supervisor/events.py, ProcessStateEvent.payload()).
 supervisord starts the listener as its own child, and on SIGTERM it shuts down
 (docs/running.rst, "Signals"); it is PID 1 here (build/entrypoint.sh, exec).
+
+CRASHEXIT_DRYRUN=1 writes "crashexit: would shut down" instead of signalling,
+for the test (build/crashexit_test.go).
 """
 import os
 import signal
 import sys
+import time
 
-# Programs whose FATAL does not take the container down (build/supervisord.conf):
-# logrotate is not on the mail path, and postfix-reload runs on demand - a
-# reload it could not start is reported to whoever asked for it.
-SPARED = {"logrotate", "postfix-reload"}
+# Programs whose failure does not take the container down
+# (build/supervisord.conf): logrotate is not on the mail path, postfix-reload
+# runs on demand - a reload it could not start is reported to whoever asked for
+# it - syslog-relay carries OpenDKIM's log lines, not mail, and cert-reload
+# looks for a renewed certificate once a day (a crash of it leaves the one
+# Postfix serves).
+SPARED = {"logrotate", "postfix-reload", "syslog-relay", "cert-reload"}
+
+# CRASH_LIMIT unexpected exits of one program within CRASH_WINDOW seconds are a
+# program that does not stay up. A program on the mail path restarts in
+# seconds; five times in ten minutes is no passing fault.
+CRASH_LIMIT = 5
+CRASH_WINDOW = 600
 
 
 def write_stdout(s):
@@ -35,7 +54,20 @@ def write_stdout(s):
     sys.stdout.flush()
 
 
+def say(s):
+    sys.stderr.write("crashexit: " + s + "\n")
+    sys.stderr.flush()
+
+
+def shut_down():
+    if os.environ.get("CRASHEXIT_DRYRUN") == "1":
+        say("would shut down")
+        return
+    os.kill(os.getppid(), signal.SIGTERM)
+
+
 def main():
+    crashes = {}  # program -> times of its unexpected exits in the window
     while True:
         # Tell supervisord we are ready for the next event.
         write_stdout("READY\n")
@@ -50,22 +82,32 @@ def main():
             pair.split(":", 1) for pair in payload.split() if ":" in pair
         )
         name = tokens.get("processname", "")
+        event = headers.get("eventname", "PROCESS_STATE_FATAL")
 
-        # We only subscribe to PROCESS_STATE_FATAL, so any event means a managed
-        # program can no longer be restarted.
-        if name in SPARED:
-            sys.stderr.write(
-                "crashexit: %s entered FATAL; it is not on the mail path, the "
-                "container stays up\n" % name
+        if event == "PROCESS_STATE_EXITED":
+            if name not in SPARED and tokens.get("expected") == "0":
+                now = time.monotonic()
+                times = [t for t in crashes.get(name, []) if now - t < CRASH_WINDOW]
+                times.append(now)
+                crashes[name] = times
+                if len(times) >= CRASH_LIMIT:
+                    say(
+                        "%s exited unexpectedly %d times in %d seconds; shutting down container"
+                        % (name, len(times), CRASH_WINDOW)
+                    )
+                    shut_down()
+                    crashes[name] = []
+        elif name in SPARED:
+            say(
+                "%s entered FATAL; it is not on the mail path, the container stays up"
+                % name
             )
-            sys.stderr.flush()
         else:
-            sys.stderr.write(
-                "crashexit: %s entered FATAL; shutting down container\n"
+            say(
+                "%s entered FATAL; shutting down container"
                 % (name or "a managed process")
             )
-            sys.stderr.flush()
-            os.kill(os.getppid(), signal.SIGTERM)
+            shut_down()
 
         write_stdout("RESULT 2\nOK")
 
diff --git a/build/crashexit_test.go b/build/crashexit_test.go
new file mode 100644
index 0000000..4e95a7e
--- /dev/null
+++ b/build/crashexit_test.go
@@ -0,0 +1,95 @@
+// Package build holds the image's scripts; this file tests crashexit.py, the
+// supervisor event listener that takes the container down.
+package build
+
+import (
+	"fmt"
+	"os"
+	"os/exec"
+	"runtime"
+	"strings"
+	"testing"
+)
+
+// event is one event as supervisord writes it to a listener's stdin
+// (supervisor 4.2.5, docs/events.rst: a header line whose len is the
+// payload's length, then the payload).
+func event(name, payload string) string {
+	return fmt.Sprintf("ver:3.0 server:supervisor serial:1 pool:crashexit poolserial:1 eventname:%s len:%d\n%s", name, len(payload), payload)
+}
+
+// runListener feeds events to crashexit.py in dry run and returns what it
+// wrote to stderr.
+func runListener(t *testing.T, events ...string) string {
+	t.Helper()
+	// python3 on Linux; on Windows "python3" may be the Store's stub, which
+	// runs nothing.
+	names := []string{"python3", "python"}
+	if runtime.GOOS == "windows" {
+		names = []string{"python", "python3"}
+	}
+	python := ""
+	for _, n := range names {
+		if p, err := exec.LookPath(n); err == nil {
+			python = p
+			break
+		}
+	}
+	if python == "" {
+		t.Skip("no python")
+	}
+	cmd := exec.Command(python, "crashexit.py")
+	cmd.Env = append(os.Environ(), "CRASHEXIT_DRYRUN=1")
+	cmd.Stdin = strings.NewReader(strings.Join(events, ""))
+	var stderr strings.Builder
+	cmd.Stderr = &stderr
+	out, err := cmd.Output()
+	if err != nil {
+		t.Fatalf("crashexit.py: %v\n%s", err, stderr.String())
+	}
+	// Python on Windows writes its text stdout with \r\n.
+	if n := strings.Count(strings.ReplaceAll(string(out), "\r\n", "\n"), "RESULT 2\nOK"); n != len(events) {
+		t.Errorf("answered %d of %d events:\n%q", n, len(events), out)
+	}
+	return stderr.String()
+}
+
+// A program on the mail path that keeps crashing after its startsecs - never
+// FATAL - takes the container down at the fifth unexpected exit (audit
+// 2026-10-12, L32); expected exits, spared programs and fewer crashes do not.
+func TestCrashexitCountsCrashes(t *testing.T) {
+	exit := func(name, expected string) string {
+		return event("PROCESS_STATE_EXITED", "processname:"+name+" groupname:"+name+" from_state:RUNNING expected:"+expected+" pid:7")
+	}
+	var four []string
+	for i := 0; i < 4; i++ {
+		four = append(four, exit("panel", "0"))
+	}
+	if got := runListener(t, four...); strings.Contains(got, "would shut down") {
+		t.Errorf("four crashes shut down:\n%s", got)
+	}
+	if got := runListener(t, append(four, exit("panel", "0"))...); !strings.Contains(got, "panel exited unexpectedly 5 times") || !strings.Contains(got, "would shut down") {
+		t.Errorf("five crashes did not shut down:\n%s", got)
+	}
+	var calm []string
+	for i := 0; i < 6; i++ {
+		calm = append(calm, exit("panel", "1"), exit("logrotate", "0"))
+	}
+	calm = append(calm, exit("opendkim", "0"), exit("opendkim", "0"), exit("opendkim", "0"))
+	if got := runListener(t, calm...); strings.Contains(got, "would shut down") {
+		t.Errorf("expected exits, spared programs and three crashes of another shut down:\n%s", got)
+	}
+}
+
+// FATAL of a mail-path program shuts down at once; of a spared one, not.
+func TestCrashexitFatal(t *testing.T) {
+	fatal := func(name string) string {
+		return event("PROCESS_STATE_FATAL", "processname:"+name+" groupname:"+name+" from_state:BACKOFF")
+	}
+	if got := runListener(t, fatal("postfix")); !strings.Contains(got, "postfix entered FATAL; shutting down") || !strings.Contains(got, "would shut down") {
+		t.Errorf("postfix FATAL:\n%s", got)
+	}
+	if got := runListener(t, fatal("logrotate"), fatal("syslog-relay")); strings.Contains(got, "would shut down") {
+		t.Errorf("a spared program's FATAL shut down:\n%s", got)
+	}
+}
diff --git a/build/logrotate-loop.sh b/build/logrotate-loop.sh
index ef962bd..d528e57 100644
--- a/build/logrotate-loop.sh
+++ b/build/logrotate-loop.sh
@@ -17,16 +17,21 @@
 # path anew (src/postlogd/postlogd.c, logwriter_open_or_die()).
 #
 # logrotate itself only rotates once the configured "daily" period has elapsed
-# (tracked in /var/lib/logrotate/status), so it is safe to invoke this more
-# often than daily — polling merely bounds how late a legitimate rotation runs.
-# (logrotate 3.21.0-1: debian/rules, --with-state-file-path=/var/lib/logrotate/
-# status. That file is in the container's own filesystem: a recreated container
-# starts without it, and logrotate.c, newState(), records a log it has no state
-# for as rotated today, so the first rotation after a recreate comes a day
-# later.)
+# (tracked in its state file), so it is safe to invoke this more often than
+# daily — polling merely bounds how late a legitimate rotation runs. The state
+# file is beside the log, under /data, not at the default
+# /var/lib/logrotate/status (logrotate 3.21.0-1: debian/rules,
+# --with-state-file-path) in the container's own filesystem: a recreated
+# container started without it, logrotate.c, newState(), records a log it has
+# no state for as rotated today, and so a host that recreates the container
+# daily - an .env change, an image bump - never rotated mail.log at all (audit
+# 2026-10-12, M19). (logrotate 3.21.0, logrotate.8.in: "-s, --state
+# statefile".) The directory is postfix:selfpost 2750 and logrotate runs as
+# root.
 set -eu
 
 CONFIG=/etc/logrotate.d/mail
+STATE=/data/log/.logrotate.status
 INTERVAL="${LOGROTATE_INTERVAL_SECONDS:-21600}"
 
 # logrotate refuses configs writable by group or others and exits 0 while
@@ -56,7 +61,7 @@ if ! logrotate_config_ok; then
 fi
 
 run_logrotate() {
-	out=$(logrotate "$CONFIG" 2>&1) || {
+	out=$(logrotate -s "$STATE" "$CONFIG" 2>&1) || {
 		echo "$out" >&2
 		return 1
 	}
diff --git a/build/postfix-config.sh b/build/postfix-config.sh
index acfe9f7..7edf087 100644
--- a/build/postfix-config.sh
+++ b/build/postfix-config.sh
@@ -117,6 +117,64 @@ fi
 RATE_MSGS="${RATE_LIMIT_MESSAGES_PER_IP:-100}"
 RATE_WINDOW="${RATE_LIMIT_WINDOW_SECONDS:-3600}"
 
+# The settings below reach main.cf and master.cf as numbers or time values.
+# A value that is neither, or one under the parameter's minimum, passes
+# `postfix check` and kills the daemon that reads it - every smtpd at its
+# first connection, or anvil and with it the rate limit (audit 2026-10-12,
+# L31; review of stage 5) - so the start stops here, saying which and why.
+# Counts and sizes are whole numbers from min up to 2147483647, an int's top
+# (Postfix 3.7.11 reads them with get_mail_conf_int*, src/global/
+# mail_conf_int.c: an int, held to the parameter's own minimum). A time value
+# is a whole number from 1 with an optional unit, s m h d or w, at most
+# 2147483647 seconds
+# (proto/postconf.proto: "Specify a non-zero time value (an integral value
+# plus an optional one-letter suffix ...). Time units: s (seconds), m
+# (minutes), h (hours), d (days), w (weeks)"; one unit - "1h30m" is read as
+# 1h, src/global/conv_time.c - so it is refused here).
+need_number() {
+	case "$2" in
+	'' | *[!0-9]*)
+		echo "postfix-config: $1 must be a whole number, got '$2'" >&2
+		exit 1
+		;;
+	esac
+	if [ "${#2}" -gt 10 ] || [ "$2" -lt "$3" ] || [ "$2" -gt 2147483647 ]; then
+		echo "postfix-config: $1 must be from $3 to 2147483647, got '$2'" >&2
+		exit 1
+	fi
+}
+need_time() {
+	if ! printf '%s' "$2" | grep -Eq '^[1-9][0-9]{0,8}[smhdw]?$'; then
+		echo "postfix-config: $1 must be a time value - a whole number from 1 with an optional s, m, h, d or w - got '$2'" >&2
+		exit 1
+	fi
+	# conv_time multiplies by the unit and refuses what passes an int.
+	n=${2%[smhdw]}
+	case "$2" in
+	*w) n=$((n * 604800)) ;;
+	*d) n=$((n * 86400)) ;;
+	*h) n=$((n * 3600)) ;;
+	*m) n=$((n * 60)) ;;
+	esac
+	if [ "$n" -gt 2147483647 ]; then
+		echo "postfix-config: $1 is more than 2147483647 seconds, got '$2'" >&2
+		exit 1
+	fi
+}
+# A rate of 0 is no limit, a size of 0 none (proto/postconf.proto,
+# smtpd_client_message_rate_limit, message_size_limit); the window is
+# anvil_rate_time_unit, at least 1 second (src/anvil/anvil.c, main(): its
+# time table's minimum 1).
+need_number RATE_LIMIT_MESSAGES_PER_IP "$RATE_MSGS" 0
+need_number RATE_LIMIT_WINDOW_SECONDS "$RATE_WINDOW" 1
+need_number INBOUND_RATE_LIMIT_MESSAGES_PER_IP "${INBOUND_RATE_LIMIT_MESSAGES_PER_IP:-20}" 0
+need_number INBOUND_MESSAGE_SIZE_LIMIT "${INBOUND_MESSAGE_SIZE_LIMIT:-26214400}" 0
+need_number DMARC_RATE_LIMIT_MESSAGES_PER_IP "${DMARC_RATE_LIMIT_MESSAGES_PER_IP:-20}" 0
+need_number DMARC_MESSAGE_SIZE_LIMIT "${DMARC_MESSAGE_SIZE_LIMIT:-5242880}" 0
+need_time MILTER_CONNECT_TIMEOUT "${MILTER_CONNECT_TIMEOUT:-15s}"
+need_time MILTER_COMMAND_TIMEOUT "${MILTER_COMMAND_TIMEOUT:-15s}"
+need_time MILTER_CONTENT_TIMEOUT "${MILTER_CONTENT_TIMEOUT:-30s}"
+
 # Milter sockets: OpenDKIM (signing, strict), the panel's sender check
 # (strict) and its journal-milter (monitoring, fail-open). Fixed container
 # paths, matched by postfix-wrapper.sh.
@@ -236,6 +294,22 @@ postconf -e \
 	"smtpd_tls_auth_only=yes" \
 	"smtpd_tls_loglevel=1"
 
+# TLS 1.2 at least, opportunistic or required - and the client's too where an
+# inbound domain requires TLS to its upstream (smtp_tls_mandatory_protocols,
+# the security review of stage 5) (audit 2026-10-12, L31; Postfix
+# 3.7.11, proto/postconf.proto, smtpd_tls_protocols: since 3.6 the default is
+# ">=TLSv1", and a lower bound is written ">=version"). A sender that offers
+# less on port 25 sends in the clear, as one without TLS does. VRFY answers
+# no question about who is accepted on port 25 (relay_recipient_maps), and
+# the banner names no distribution (Debian's adds "(Debian/GNU)"; the
+# upstream default is "$myhostname ESMTP $mail_name").
+postconf -e \
+	"smtpd_tls_protocols=>=TLSv1.2" \
+	"smtpd_tls_mandatory_protocols=>=TLSv1.2" \
+	"smtp_tls_mandatory_protocols=>=TLSv1.2" \
+	"disable_vrfy_command=yes" \
+	'smtpd_banner=$myhostname ESMTP'
+
 # SASL: Cyrus with the local sasldb2 the panel maintains. The realm is left
 # implicit (smtpd_sasl_local_domain empty) so the authenticated name Postfix
 # uses for sender_login_maps is the BARE login the panel writes into the map;
diff --git a/build/supervisord.conf b/build/supervisord.conf
index 844698a..4343451 100644
--- a/build/supervisord.conf
+++ b/build/supervisord.conf
@@ -9,13 +9,15 @@
 ; pass, with no wait for a program to be ready.)
 ;
 ; If a managed process of the mail path exhausts its restart retries (FATAL),
-; the crashexit event listener brings the whole container down so Docker's
-; restart policy starts it again (the same container: docs.docker.com, "Start
-; containers automatically", restart policies), rather than lingering with a
-; dead component. A program reaches FATAL only through BACKOFF, by exits that
-; come before its startsecs (supervisor 4.2.5, supervisor/process.py,
-; Subprocess.finish() and transition()): an exit after it is EXITED and simply
-; restarted, for ever. logrotate's FATAL is left on Server > Health
+; or exits unexpectedly five times in ten minutes, the crashexit event listener
+; brings the whole container down so Docker's restart policy starts it again
+; (the same container: docs.docker.com, "Start containers automatically",
+; restart policies), rather than lingering with a dead component. A program
+; reaches FATAL only through BACKOFF, by exits that come before its startsecs
+; (supervisor 4.2.5, supervisor/process.py, Subprocess.finish() and
+; transition()): an exit after it is EXITED and simply restarted, for ever -
+; which the count of exits covers (audit 2026-10-12, L32). logrotate's,
+; postfix-reload's and syslog-relay's failures are left on Server > Health
 ; (build/crashexit.py).
 
 [supervisord]
@@ -66,7 +68,11 @@ stderr_logfile=/dev/stderr
 stderr_logfile_maxbytes=0
 
 [program:opendkim]
-command=/usr/sbin/opendkim -f -x /etc/opendkim.conf
+; It waits, five seconds at most, for the syslog relay's socket: supervisord
+; starts programs in priority order without waiting for one to be ready, and
+; OpenDKIM's start line would go nowhere (review of audit stage 5). exec keeps
+; the supervised pid OpenDKIM's.
+command=/bin/sh -c 'i=0; while [ ! -S /run/syslog/log ] && [ "$i" -lt 50 ]; do sleep 0.1; i=$((i+1)); done; exec /usr/sbin/opendkim -f -x /etc/opendkim.conf'
 priority=100
 autostart=true
 autorestart=true
@@ -182,6 +188,6 @@ stderr_logfile_maxbytes=0
 ; STOPPED (Subprocess.finish(), self.killing), which this listener never sees.
 [eventlistener:crashexit]
 command=/usr/local/bin/crashexit.py
-events=PROCESS_STATE_FATAL
+events=PROCESS_STATE_FATAL,PROCESS_STATE_EXITED
 stderr_logfile=/dev/stderr
 stderr_logfile_maxbytes=0
diff --git a/cmd/panel/envdoc_test.go b/cmd/panel/envdoc_test.go
index b4cfa39..8872f4b 100644
--- a/cmd/panel/envdoc_test.go
+++ b/cmd/panel/envdoc_test.go
@@ -1,176 +1,138 @@
 package main
 
 import (
+	"io/fs"
+	"os"
+	"path/filepath"
+	"regexp"
 	"slices"
+	"strings"
 	"testing"
 )
 
-// documentedPublic matches docs/guide.md "Environment variables" table.
-var documentedPublic = []string{
-	"SELFPOST_HOSTNAME",
-	"SUBMISSION_ENABLE",
-	"RATE_LIMIT_MESSAGES_PER_IP",
-	"RATE_LIMIT_WINDOW_SECONDS",
-	"SEND_LOG_RETENTION_DAYS",
-	"PANEL_SESSION_IDLE_DAYS",
-	"SELFPOST_DNS_RESOLVERS",
-	"TRUSTED_PROXY_CIDR",
-	"INBOUND_RELAY_ENABLE",
-	"INBOUND_ANTISPAM_MILTER",
-	"INBOUND_ANTISPAM_MILTER_ACTION",
-	"INBOUND_RATE_LIMIT_MESSAGES_PER_IP",
-	"INBOUND_MESSAGE_SIZE_LIMIT",
-	"DMARC_REPORTS_ENABLE",
-	"DMARC_RATE_LIMIT_MESSAGES_PER_IP",
-	"DMARC_MESSAGE_SIZE_LIMIT",
+// The environment the image reads and the environment the documents describe
+// are compared as they are, not as lists kept by hand beside them (audit
+// 2026-10-12, stage 5 - the three lists this file held were compared with each
+// other and with nothing else). Read: what the panel's code asks of the
+// environment (cmd/panel and internal, tests aside) and what the start-up
+// scripts take with a default (build/*.sh, "${VAR:-…}"). Documented: the
+// operator's table in guide.md § Environment variables, with the paragraph
+// under it, and the internal list in architecture.md § Configuration.
+
+var (
+	goEnvRead     = regexp.MustCompile(`(?:envDefault|envInt|envBool|envSeconds|envDuration|os\.Getenv|os\.LookupEnv)\("([A-Z][A-Z0-9_]+)"`)
+	scriptEnvRead = regexp.MustCompile(`\$\{([A-Z][A-Z0-9_]+):[-?=]`)
+	docEnvName    = regexp.MustCompile("`([A-Z][A-Z0-9_]{2,})`")
+)
+
+func readFile(t *testing.T, path string) string {
+	t.Helper()
+	b, err := os.ReadFile(path)
+	if err != nil {
+		t.Fatal(err)
+	}
+	return string(b)
 }
 
-// documentedInternal matches architecture.md § Configuration "Internal env vars".
-var documentedInternal = []string{
-	"SELFPOST_DATA_DIR",
-	"SELFPOST_DB_PATH",
-	"SELFPOST_SETUP_TOKEN_FILE",
-	"PANEL_HTTP_ADDR",
-	"JOURNAL_MILTER_SOCKET",
-	"SENDER_CHECK_SOCKET",
-	"MAIL_LOG",
-	"PANEL_COOKIE_SECURE",
-	"OPENDKIM_SOCKET",
-	"OPENDKIM_DIR",
-	"DKIM_SELECTOR_DEFAULT",
-	"SASL_DB_PATH",
-	"SASL_REALM",
-	"POSTFIX_DIR",
-	"POSTFIX_SENDER_LOGIN_MAPS",
-	"POSTFIX_QUEUE_DIR",
-	"POSTFIX_RELAY_DOMAINS",
-	"POSTFIX_TRANSPORT_MAPS",
-	"POSTFIX_RELAY_RECIPIENTS",
-	"POSTFIX_TLS_POLICY_MAPS",
-	"POSTFIX_DMARC_RECIPIENTS",
-	"POSTFIX_DMARC_TRANSPORT",
-	"POSTFIX_DMARC_RELAY_DOMAINS",
-	"SELFPOST_DEPLOY_ROOT",
-	"MILTER_CONNECT_TIMEOUT",
-	"MILTER_COMMAND_TIMEOUT",
-	"MILTER_CONTENT_TIMEOUT",
-	"MILTER_WAIT_TIMEOUT",
-	"TLS_RELOAD_INTERVAL_SECONDS",
-	"LOGROTATE_INTERVAL_SECONDS",
-}
-
-// documentedComposeFixed are env keys documented outside the table (TLS paths fixed in compose).
-var documentedComposeFixed = []string{
-	"TLS_CERT_FILE",
-	"TLS_KEY_FILE",
-}
-
-// loadConfigKeys is every environment variable read by loadConfig() in main.go.
-// Update together with loadConfig when adding a new key.
-var loadConfigKeys = []string{
-	"SELFPOST_DATA_DIR",
-	"PANEL_HTTP_ADDR",
-	"JOURNAL_MILTER_SOCKET",
-	"SENDER_CHECK_SOCKET",
-	"MAIL_LOG",
-	"SEND_LOG_RETENTION_DAYS",
-	"SELFPOST_DB_PATH",
-	"SELFPOST_SETUP_TOKEN_FILE",
-	"SELFPOST_HOSTNAME",
-	"PANEL_COOKIE_SECURE",
-	"SUBMISSION_ENABLE",
-	"TRUSTED_PROXY_CIDR",
-	"PANEL_SESSION_IDLE_DAYS",
-	"SELFPOST_DNS_RESOLVERS",
-	"TLS_CERT_FILE",
-	"TLS_RELOAD_INTERVAL_SECONDS",
-	"OPENDKIM_SOCKET",
-	"OPENDKIM_DIR",
-	"DKIM_SELECTOR_DEFAULT",
-	"SASL_DB_PATH",
-	"SASL_REALM",
-	"POSTFIX_DIR",
-	"SELFPOST_DEPLOY_ROOT",
-	"INBOUND_RELAY_ENABLE",
-	"INBOUND_ANTISPAM_MILTER",
-	"INBOUND_ANTISPAM_MILTER_ACTION",
-	"DMARC_REPORTS_ENABLE",
-}
-
-// buildScriptKeys is every ${VAR:-…} / os.Getenv used in build/*.sh and entrypoint.sh
-// but not necessarily in loadConfig. Update when startup scripts gain a new knob.
-var buildScriptKeys = []string{
-	"SELFPOST_HOSTNAME",
-	"TLS_CERT_FILE",
-	"TLS_KEY_FILE",
-	"RATE_LIMIT_MESSAGES_PER_IP",
-	"RATE_LIMIT_WINDOW_SECONDS",
-	"OPENDKIM_SOCKET",
-	"JOURNAL_MILTER_SOCKET",
-	"SENDER_CHECK_SOCKET",
-	"MAIL_LOG",
-	"POSTFIX_SENDER_LOGIN_MAPS",
-	"POSTFIX_QUEUE_DIR",
-	"SASL_DB_PATH",
-	"SUBMISSION_ENABLE",
-	"INBOUND_RELAY_ENABLE",
-	"INBOUND_ANTISPAM_MILTER",
-	"INBOUND_ANTISPAM_MILTER_ACTION",
-	"INBOUND_RATE_LIMIT_MESSAGES_PER_IP",
-	"INBOUND_MESSAGE_SIZE_LIMIT",
-	"DMARC_REPORTS_ENABLE",
-	"DMARC_RATE_LIMIT_MESSAGES_PER_IP",
-	"DMARC_MESSAGE_SIZE_LIMIT",
-	"POSTFIX_RELAY_DOMAINS",
-	"POSTFIX_TRANSPORT_MAPS",
-	"POSTFIX_RELAY_RECIPIENTS",
-	"POSTFIX_TLS_POLICY_MAPS",
-	"POSTFIX_DMARC_RECIPIENTS",
-	"POSTFIX_DMARC_TRANSPORT",
-	"POSTFIX_DMARC_RELAY_DOMAINS",
-	"MILTER_CONNECT_TIMEOUT",
-	"MILTER_COMMAND_TIMEOUT",
-	"MILTER_CONTENT_TIMEOUT",
-	"MILTER_WAIT_TIMEOUT",
-	"TLS_RELOAD_INTERVAL_SECONDS",
-	"LOGROTATE_INTERVAL_SECONDS",
-}
-
-func documentedKeys() []string {
-	keys := append([]string{}, documentedPublic...)
-	keys = append(keys, documentedInternal...)
-	keys = append(keys, documentedComposeFixed...)
-	slices.Sort(keys)
-	return slices.Compact(keys)
-}
-
-func TestLoadConfigKeysDocumented(t *testing.T) {
-	doc := documentedKeys()
-	for _, key := range loadConfigKeys {
-		if !slices.Contains(doc, key) {
-			t.Errorf("loadConfig reads %s but it is not listed in guide.md public, internal, or compose-fixed env docs", key)
+// envRead is every variable the code and the scripts read.
+func envRead(t *testing.T) map[string]bool {
+	t.Helper()
+	keys := map[string]bool{}
+	for _, root := range []string{".", filepath.Join("..", "..", "internal")} {
+		err := filepath.WalkDir(root, func(path string, d fs.DirEntry, err error) error {
+			if err != nil || d.IsDir() || !strings.HasSuffix(path, ".go") || strings.HasSuffix(path, "_test.go") {
+				return err
+			}
+			for _, m := range goEnvRead.FindAllStringSubmatch(readFile(t, path), -1) {
+				keys[m[1]] = true
+			}
+			return nil
+		})
+		if err != nil {
+			t.Fatal(err)
 		}
 	}
+	scripts, err := filepath.Glob(filepath.Join("..", "..", "build", "*.sh"))
+	if err != nil || len(scripts) == 0 {
+		t.Fatalf("no build scripts: %v", err)
+	}
+	for _, path := range scripts {
+		for _, m := range scriptEnvRead.FindAllStringSubmatch(readFile(t, path), -1) {
+			keys[m[1]] = true
+		}
+	}
+	return keys
+}
+
+// section is the text of doc from the first line that starts with start up
+// to the next that starts with any of ends.
+func section(t *testing.T, doc, start string, ends ...string) string {
+	t.Helper()
+	i := strings.Index(doc, "\n"+start)
+	if i < 0 {
+		t.Fatalf("no %q", start)
+	}
+	rest := doc[i+1+len(start):]
+	end := len(rest)
+	for _, e := range ends {
+		if j := strings.Index(rest, "\n"+e); j >= 0 && j < end {
+			end = j
+		}
+	}
+	return rest[:end]
+}
+
+// envDocumented is every variable the documents name, and where.
+func envDocumented(t *testing.T) map[string]string {
+	t.Helper()
+	keys := map[string]string{}
+	guide := section(t, readFile(t, filepath.Join("..", "..", "docs", "guide.md")), "### Environment variables", "### ")
+	for _, m := range docEnvName.FindAllStringSubmatch(guide, -1) {
+		keys[m[1]] = "guide.md § Environment variables"
+	}
+	arch := section(t, readFile(t, filepath.Join("..", "..", "docs", "architecture.md")), "**Internal env vars.**", "### ", "## ", "**")
+	for _, m := range docEnvName.FindAllStringSubmatch(arch, -1) {
+		if _, ok := keys[m[1]]; !ok {
+			keys[m[1]] = "architecture.md § Configuration"
+		}
+	}
+	return keys
+}
+
+func TestEnvironmentReadIsDocumented(t *testing.T) {
+	doc := envDocumented(t)
+	var missing []string
+	for key := range envRead(t) {
+		if _, ok := doc[key]; !ok {
+			missing = append(missing, key)
+		}
+	}
+	slices.Sort(missing)
+	for _, key := range missing {
+		t.Errorf("%s is read but documented nowhere: guide.md § Environment variables for an operator's setting, architecture.md § Configuration for an internal one", key)
+	}
 }
 
-func TestBuildScriptKeysDocumented(t *testing.T) {
-	doc := documentedKeys()
-	for _, key := range buildScriptKeys {
-		if !slices.Contains(doc, key) {
-			t.Errorf("build scripts read %s but it is not listed in guide.md env documentation", key)
+func TestEnvironmentDocumentedIsRead(t *testing.T) {
+	read := envRead(t)
+	var stale []string
+	for key, where := range envDocumented(t) {
+		if !read[key] {
+			stale = append(stale, key+" ("+where+")")
 		}
 	}
+	slices.Sort(stale)
+	for _, key := range stale {
+		t.Errorf("%s is documented but nothing reads it", key)
+	}
 }
 
-func TestDocumentedKeysAreRead(t *testing.T) {
-	read := append([]string{}, loadConfigKeys...)
-	read = append(read, buildScriptKeys...)
-	slices.Sort(read)
-	read = slices.Compact(read)
-
-	for _, key := range documentedKeys() {
-		if !slices.Contains(read, key) {
-			t.Errorf("guide.md documents %s but no code in loadConfig or build scripts reads it", key)
+// The parsers find what they are for: a key of each kind is among the read.
+func TestEnvironmentParsersFindKeys(t *testing.T) {
+	read := envRead(t)
+	for _, key := range []string{"SELFPOST_HOSTNAME", "PANEL_HTTP_ADDR", "MILTER_WAIT_TIMEOUT", "POSTFIX_QUEUE_DIR"} {
+		if !read[key] {
+			t.Errorf("%s not found among the keys read", key)
 		}
 	}
 }
diff --git a/deploy/traefik/extract-cert.sh b/deploy/traefik/extract-cert.sh
index bbc6316..dd4a360 100644
--- a/deploy/traefik/extract-cert.sh
+++ b/deploy/traefik/extract-cert.sh
@@ -1,11 +1,11 @@
-#!/bin/sh
+#!/bin/bash
 # Extracts a PEM cert/key pair for one domain out of Traefik's acme.json —
 # Traefik keeps its certificates there, so a PEM extraction step is required.
 # Run this on the host, after Traefik has issued or renewed the certificate, and
 # again on a schedule (cron/systemd timer) since acme.json is not itself watched
 # by SelfPost/Postfix.
 #
-# Requires jq. Usage: ./extract-cert.sh <acme.json path> <domain> <output dir>
+# Requires bash and jq. Usage: ./extract-cert.sh <acme.json path> <domain> <output dir>
 #
 # The layout is not documented (doc.traefik.io/traefik/v3.1/https/acme/ says
 # only "JSON file"); read in Traefik v3.1.0: pkg/provider/acme/local_store.go
@@ -13,23 +13,63 @@
 # Certificates}, provider.go Certificate{domain, certificate, key} with the PEM
 # as []byte - base64 in JSON (Go encoding/json). "le" is the resolver
 # docker-compose.traefik.yml names.
-set -eu
+#
+# Nothing is replaced unless both new files are PEM: a domain acme.json does
+# not hold, an empty field or a broken file stops the script with an error and
+# leaves the files that were there (audit 2026-10-12, M21 - under sh without
+# pipefail, jq finding nothing still exited 0 and two empty files replaced the
+# certificate; Postfix's TLS broke at its next restart). The new files are
+# written beside the old ones, the owner's alone until they are whole, then
+# renamed into place.
+set -euo pipefail
 
 ACME_JSON="${1:?path to acme.json}"
 DOMAIN="${2:?domain name, e.g. mail.example.com}"
 OUT_DIR="${3:?output directory, e.g. ./extracted-certs}"
 
 mkdir -p "$OUT_DIR"
+umask 077
 
-jq -r --arg domain "$DOMAIN" '
-  .le.Certificates[]
-  | select(.domain.main == $domain)
-  | .certificate' "$ACME_JSON" | base64 -d > "$OUT_DIR/fullchain.pem"
+die() {
+	echo "extract-cert: $*" >&2
+	exit 1
+}
 
-jq -r --arg domain "$DOMAIN" '
-  .le.Certificates[]
-  | select(.domain.main == $domain)
-  | .key' "$ACME_JSON" | base64 -d > "$OUT_DIR/privkey.pem"
+# field prints the base64 of one field of the domain's first certificate, or
+# nothing.
+field() {
+	jq -r --arg domain "$DOMAIN" --arg field "$1" '
+	  first(.le.Certificates[]? | select(.domain.main == $domain) | .[$field]) // empty
+	' "$ACME_JSON"
+}
 
-chmod 0640 "$OUT_DIR/fullchain.pem" "$OUT_DIR/privkey.pem"
+cert_b64=$(field certificate)
+key_b64=$(field key)
+[ -n "$cert_b64" ] || die "$ACME_JSON holds no certificate for $DOMAIN"
+[ -n "$key_b64" ] || die "$ACME_JSON holds no key for $DOMAIN"
+
+tmp_cert="" tmp_key=""
+trap 'rm -f "$tmp_cert" "$tmp_key"' EXIT
+tmp_cert=$(mktemp "$OUT_DIR/.fullchain.pem.XXXXXX")
+tmp_key=$(mktemp "$OUT_DIR/.privkey.pem.XXXXXX")
+
+printf '%s' "$cert_b64" | base64 -d >"$tmp_cert" || die "the certificate of $DOMAIN is not base64"
+printf '%s' "$key_b64" | base64 -d >"$tmp_key" || die "the key of $DOMAIN is not base64"
+grep -q -- '-----BEGIN CERTIFICATE-----' "$tmp_cert" || die "the certificate of $DOMAIN is not PEM"
+grep -q -- '-----BEGIN .*PRIVATE KEY-----' "$tmp_key" || die "the key of $DOMAIN is not PEM"
+
+chmod 0640 "$tmp_cert" "$tmp_key"
+# The group the files had stays theirs: the guide gives the key to group 998
+# so the panel can read it for a full backup, and a run from root's cron would
+# otherwise hand it to root's group (review of audit stage 5).
+for f in fullchain privkey; do
+	if [ -e "$OUT_DIR/$f.pem" ]; then
+		tmp=$tmp_cert
+		[ "$f" = privkey ] && tmp=$tmp_key
+		chgrp --reference="$OUT_DIR/$f.pem" "$tmp" || die "cannot give the new $f.pem the group of the old one"
+	fi
+done
+mv -f "$tmp_cert" "$OUT_DIR/fullchain.pem"
+mv -f "$tmp_key" "$OUT_DIR/privkey.pem"
+trap - EXIT
 echo "extracted $DOMAIN to $OUT_DIR/{fullchain,privkey}.pem"
diff --git a/docs/architecture.md b/docs/architecture.md
index a64f34f..4423ce3 100644
--- a/docs/architecture.md
+++ b/docs/architecture.md
@@ -46,10 +46,17 @@ that will not start, is an exit supervisord counts as too quick: once
 each start it is STARTING.
 
 `crashexit` event listener exits the container when a program of the mail path
-is FATAL, so Docker `restart: unless-stopped` starts it again - the same
-container, not a new one: the entrypoint clears what the last run left in
-`/run` (the milter sockets, the sender check's alive mark). `logrotate`'s
-FATAL (a config logrotate would ignore) stays on Server › Health instead.
+is FATAL - it crashed before its `startsecs` four times running (the start
+and `startretries=3`) - or has
+exited unexpectedly five times in ten minutes, however long each run lasted
+(an exit after `startsecs` is EXITED and restarted, never FATAL; `2.6.0`), so
+Docker `restart: unless-stopped` starts it again - the same container, not a
+new one: the entrypoint clears what the last run left in `/run` (the milter
+sockets, the sender check's alive mark). Besides a stop, supervisord itself
+dying, or the entrypoint refusing a setting, nothing else exits the
+container. `logrotate`'s FATAL (a config logrotate would ignore),
+`postfix-reload`'s (reported to the page that asked), `cert-reload`'s and
+`syslog-relay`'s stay on Server › Health instead.
 The panel runs `postfix-reload` through supervisord's XML-RPC interface and
 waits for its exit status (`internal/supervisor`, `RunOnce`); the program
 rests EXITED after a run.
@@ -1110,7 +1117,9 @@ unsupported rather than as a missing doc:
   `POSTFIX_DMARC_RELAY_DOMAINS` (`/data/postfix/dmarc_relay_domains`),
   `POSTFIX_QUEUE_DIR` (`/data/postfix/queue` — set in `build/postfix-config.sh`),
   `SELFPOST_DEPLOY_ROOT` (`/selfpost-deploy` — operator project directory for
-  full backups; mount `.:/selfpost-deploy:ro` in compose).
+  full backups; mount `.:/selfpost-deploy:ro` in compose), `ANTISPAM_DIR`
+  (`/data/antispam` — the filter lists and the filter's key, which the spam
+  filter's container mounts).
 - **Milter and Postfix startup:** `MILTER_CONNECT_TIMEOUT` (`15s`),
   `MILTER_COMMAND_TIMEOUT` (`15s`), `MILTER_CONTENT_TIMEOUT` (`30s`),
   `MILTER_WAIT_TIMEOUT` (`30` seconds).
diff --git a/docs/audit-2026-10-12.md b/docs/audit-2026-10-12.md
index 80cf624..5d56006 100644
--- a/docs/audit-2026-10-12.md
+++ b/docs/audit-2026-10-12.md
@@ -1418,31 +1418,99 @@ documented in security.md.
 
 ### Stage 5 — image and Postfix hardening (M17–M19, M21, L30–L32) → `2.6.0`
 
-- [ ] **Supervisor socket**: a group of its own (`supervisor`), panel only;
+- [x] **Supervisor socket**: a group of its own (`supervisor`), panel only;
    `postfix`/`opendkim` keep `selfpost` for the file paths. — **Opus**
-- [ ] **OpenDKIM**: `Syslog yes` (supervisord captures it) or `Logfile`;
+   *Done 2026-10-15:* `groupadd --system supervisor`, the panel its one
+   member; `[unix_http_server] chown=root:supervisor`. e2e: every program
+   RUNNING, the panel still reloads OpenDKIM and Postfix through it.
+- [x] **OpenDKIM**: `Syslog yes` (supervisord captures it) or `Logfile`;
    `Canonicalization relaxed/simple`; `OversignHeaders From`. e2e: DKIM still
    verifies; a message with two `From:` is refused before signing anyway.
    — **Opus**
-- [ ] **Postfix**: `smtpd_tls_protocols = >=TLSv1.2`, `smtpd_tls_mandatory_protocols`
+   *Done 2026-10-15,* read in OpenDKIM 2.11.0~beta2's source first: neither
+   way worked - syslog(3) writes to `/dev/log`, which nobody served in the
+   container, and there is no `Logfile` option. `internal/syslogrelay`
+   (`panel -syslog-relay=/run/syslog/log`, program `syslog-relay` before
+   OpenDKIM, `/dev/log` a link to it from the entrypoint) passes the lines
+   to stdout, severity error and worse marked. `Syslog yes`,
+   `Canonicalization relaxed/simple`, `OversignHeaders From` (RFC 6376
+   § 3.4, § 8.15). e2e: OpenDKIM's start line in the container log; the
+   DKIM-verify steps pass. The two-`From:` refusal is the sender check's
+   (2.4.0, 2.5.2), unchanged.
+- [x] **Postfix**: `smtpd_tls_protocols = >=TLSv1.2`, `smtpd_tls_mandatory_protocols`
    likewise, `disable_vrfy_command = yes`, `smtpd_banner = $myhostname ESMTP`;
    integer validation of `RATE_LIMIT_*`, `*_SIZE_LIMIT`, `MILTER_*_TIMEOUT` at
    the top of `postfix-config.sh` with a clear exit. — **Opus**
-- [ ] **logrotate state under `/data/log/.logrotate.status`** (`-s`), group-
+   *Done 2026-10-15:* the four settings (proto/postconf.proto: `>=version`
+   since 3.6); `need_number` / `need_time` (a whole number, a time value
+   with s m h d w) for the six counts and sizes and the three milter
+   timeouts. e2e: `postconf -h` reads them back; `TestNumericSettingsGate`
+   starts the image with three bad values and one good set.
+- [x] **logrotate state under `/data/log/.logrotate.status`** (`-s`), group-
    readable as the directory is. — **Opus**
-- [ ] **entrypoint**: normalise the three DMARC maps with the other five;
+   *Done 2026-10-15:* `logrotate -s /data/log/.logrotate.status`
+   (logrotate.8.in: "-s, --state statefile"); the entrypoint's
+   `find /data/log -type f -exec chmod 0640` covers it. e2e: the file is
+   there after the start.
+- [x] **entrypoint**: normalise the three DMARC maps with the other five;
    remove the dead `set-permissions` branch. — **Opus**
-- [ ] **`extract-cert.sh`**: `set -o pipefail` under `bash`, check both outputs
+   *Done before this stage:* the maps since the review of stage 3 (every
+   file beside `queue/` in `/data/postfix`, H1 there), the branch since
+   stage 2c (assumptions C-P34).
+- [x] **`extract-cert.sh`**: `set -o pipefail` under `bash`, check both outputs
    are non-empty PEM before moving them into place, create `0600` first.
    — **Opus**
-- [ ] **`crashexit`**: subscribe to `PROCESS_STATE_EXITED` with a restart-count
+   *Done 2026-10-15:* bash, `set -euo pipefail`, `umask 077`; jq's
+   `first(...) // empty` per field, refused when empty or not PEM; `mktemp`
+   beside the target, `chmod 0640`, `mv`; the files that were there stay on
+   any refusal. Run on the test server with a stand-in jq (the host has
+   none): a good pair, a missing domain, a non-PEM field. Executable in
+   git.
+- [x] **`crashexit`**: subscribe to `PROCESS_STATE_EXITED` with a restart-count
    threshold, or raise `startsecs` so a crash after 1 s still reaches FATAL;
    say in architecture.md what actually exits the container. — **Opus**
-- [ ] **`envdoc_test` made real**: parse `envDefault|envInt|os.Getenv("…")` out of
+   *Done 2026-10-15:* `PROCESS_STATE_FATAL,PROCESS_STATE_EXITED`; five
+   `expected:0` exits of one program in 600 s shut down, as FATAL does;
+   `syslog-relay` joins the spared. `build/crashexit_test.go` runs the
+   script under python with `CRASHEXIT_DRYRUN`. architecture.md says what
+   exits the container.
+- [x] **`envdoc_test` made real**: parse `envDefault|envInt|os.Getenv("…")` out of
    `cmd/panel/*.go` and `${VAR` out of `build/*.sh`, parse the key tables out
    of guide.md and architecture.md, compare. — **Opus**
-- [ ] Docs: architecture § Image and processes, § Configuration; security.md
+   *Done 2026-10-15:* read from cmd/panel and internal (tests aside) and
+   build/*.sh (`${VAR:-…}`), documented in guide.md § Environment variables
+   and architecture.md's internal list; both ways. It found `ANTISPAM_DIR`
+   documented nowhere (added).
+- [x] Docs: architecture § Image and processes, § Configuration; security.md
    § Process. — **Sonnet**
+   *Done 2026-10-15* with the steps: the programs table (`syslog-relay`),
+   what exits the container, `ANTISPAM_DIR`; security.md § Output and
+   process (the socket's group).
+
+*Changed by the reviews of stage 5 (2026-10-15; technical and security):*
+the e2e's numeric-settings test ran a container that passed every gate and
+never ended (the first run of the stage's e2e hung on it): the good values
+are now checked beside a bad one after them, and the runs are named,
+bounded to a minute and removed. The gates refuse what is under a
+parameter's minimum (a zero window kills anvil, a zero milter timeout
+smtpd and cleanup - src/anvil/anvil.c, src/smtpd/smtpd.c) and what passes an
+int, in seconds for a time value (src/global/conv_time.c reads one unit and
+refuses an overflow). OpenDKIM waits, five seconds at most, for the relay's
+socket. The relay marks its lines `syslog: `, writes control characters
+out (a forged second line), reads at once into a queue and drops past 200
+lines a second or a full queue, saying how many - a relay that stopped
+reading would have held OpenDKIM in syslog(3). `smtp_tls_mandatory_protocols`
+too. extract-cert.sh keeps the old files' group (a cron run as root handed
+the key to root's group) and sets its trap before mktemp. `cert-reload`
+joins the spared programs. security.md: the restart after five panel exits,
+and the relay's socket. Measured, against the technical review's guess:
+smtpd runs with the `selfpost` group among its groups (Uid 101, Groups
+104 998 on the test server), so before this stage it did reach the
+supervisor socket. Accepted, with the reason: the logrotate state file in
+the `postfix` user's directory - that user can stop rotation through the
+log it owns anyway; envdoc_test reads `${VAR:-}` and the Go helpers, not
+bare `$VAR` or python (none today); the 600 s pruning in crashexit is not
+tested (the count and the spared are).
 
 ### Stage 6 — documentation and roadmap sweep (no product code, no cut)
 
diff --git a/docs/roadmap.md b/docs/roadmap.md
index 7f21999..183afba 100644
--- a/docs/roadmap.md
+++ b/docs/roadmap.md
@@ -45,7 +45,7 @@ in `git log` and [CHANGELOG.md](../CHANGELOG.md).
 | from-header-binding | Hold a message's `From:` header against the application that sends it | shipped `2.4.0` | 9/9 | [plans/from-header-binding.md](plans/from-header-binding.md) |
 | panel-redesign | Panel redesign (accepted mockups, design contract) | shipped `2.0.0` | 27/27 | [plans/panel-redesign.md](plans/panel-redesign.md) |
 | schema-squash | Squash SQLite migrations into a 2.x baseline | built in panel-redesign (stage 1) | — | [plans/panel-redesign.md](plans/panel-redesign.md) |
-| audit-2026-10-12 | Follow-ups of the 2026-10-12 full-tree code audit, seven stages | in progress (stage 0 shipped `2.4.2`, stages 1+2 `2.5.0`, 2b `2.5.1`, 2c `2.5.2`, 3 `2.5.3`, 4 `2.5.4`; next stage 5 → `2.6.0`) | 68/81 | [audit-2026-10-12.md](audit-2026-10-12.md) |
+| audit-2026-10-12 | Follow-ups of the 2026-10-12 full-tree code audit, seven stages | in progress (stage 0 shipped `2.4.2`, stages 1+2 `2.5.0`, 2b `2.5.1`, 2c `2.5.2`, 3 `2.5.3`, 4 `2.5.4`; next stage 5 → `2.6.0`) | 77/81 | [audit-2026-10-12.md](audit-2026-10-12.md) |
 
 **Recommended order** (not binding; owner, 2026-10-09: feature order follows
 development convenience): **panel-redesign** shipped as `2.0.0` (2026-10-11) and
diff --git a/docs/security.md b/docs/security.md
index 098edb1..aafbefc 100644
--- a/docs/security.md
+++ b/docs/security.md
@@ -572,7 +572,10 @@ deferred item from the roadmap.
   off by whoever can make the panel slow. Supervisord starts a panel that
   died again at once; one that dies within a second of starting is tried
   four times in a few seconds, and then SelfPost's `crashexit` listener takes
-  the container down (supervisor 4.2.5, `startretries=3`), so the outage is
+  the container down (supervisor 4.2.5, `startretries=3`); since `2.6.0` it
+  does so too when the panel exits unexpectedly five times in ten minutes,
+  however long each run lasted - so five malformed packets on a milter
+  socket (the next item) restart the whole container. The outage is
   seconds or the whole instance; Server › Health counts the
   downtime and the mail deferred for it. Trigger to revisit: those numbers
   not staying at nothing - then the check moves into a process of its own
@@ -585,6 +588,15 @@ deferred item from the roadmap.
   of the restart defer mail instead of passing it unjournalled (technical
   review, 2026-10-12). Trigger to revisit: anything untrusted able to open
   a Unix socket in the container.
+- **The container's `/dev/log` takes datagrams from any user in it** (since
+  `2.6.0`, for OpenDKIM's log): what is written there reaches the container
+  log, each line marked `syslog: `, control characters written out, at most
+  200 lines a second (the rest counted and dropped). A user who can write it
+  can add lines to `docker logs` under that mark and no other; the panel
+  reads only `mail.log`. logrotate's state file is under `/data/log`, the
+  `postfix` user's directory: that user could stop rotation through it -
+  as through the log itself, which it owns. Trigger to revisit: anything
+  untrusted able to run in the container.
 - **When the hostname is itself a sending domain,** the server's mail is
   signed with that domain's key. Whoever may export the domain has the key,
   and its applications may send as `postmaster@<hostname>` by right. The
diff --git a/internal/logtail/logtail_test.go b/internal/logtail/logtail_test.go
index e47f47d..dc6b1d7 100644
--- a/internal/logtail/logtail_test.go
+++ b/internal/logtail/logtail_test.go
@@ -18,7 +18,7 @@ import (
 // code cites (Postfix 3.7.11, src/global/log_adhoc.c and the others), unless a
 // comment says where one was seen; some carry no stamp, which the parsers
 // take as they come. One shape Postfix does not write here: opendkim lines in
-// mail.log (build/opendkim.conf has Syslog no).
+// mail.log (OpenDKIM logs through syslog(3), to the container log - build/opendkim.conf).
 
 // qmgr's expiry line, as Postfix 3.7.11 writes it (src/qmgr/qmgr_active.c,
 // qmgr_active_done_25_generic(): "%s: from=<%s>, status=%s, returned to
diff --git a/internal/syslogrelay/syslogrelay.go b/internal/syslogrelay/syslogrelay.go
index ac1945f..58754c4 100644
--- a/internal/syslogrelay/syslogrelay.go
+++ b/internal/syslogrelay/syslogrelay.go
@@ -17,6 +17,8 @@ import (
 	"net"
 	"os"
 	"regexp"
+	"strconv"
+	"time"
 )
 
 // stamp is the BSD syslog timestamp that follows the priority, "Oct 15
@@ -24,10 +26,17 @@ import (
 // space). The container's log has times of its own.
 var stamp = regexp.MustCompile(`^[A-Z][a-z]{2} [ 0-9][0-9] [0-9]{2}:[0-9]{2}:[0-9]{2} `)
 
+// Prefix begins every relayed line. The socket takes datagrams from any user
+// in the container, so a relayed line must not pass for one of the panel's
+// or supervisord's own (security review of audit stage 5).
+const Prefix = "syslog: "
+
 // Line turns one datagram into the line written out: the priority and the
 // timestamp taken off, trailing newlines too; what remains is "ident[pid]:
 // message". A severity of error or worse (RFC 3164 § 4.1.1: the priority is
-// facility*8 + severity, and 0-3 are emergency to error) is said in front.
+// facility*8 + severity, and 0-3 are emergency to error) is said in front. A
+// control character within it - a newline that would start a line of its own
+// - is written as \xNN.
 func Line(datagram []byte) string {
 	b := bytes.TrimRight(datagram, "\r\n\x00")
 	severity := -1
@@ -51,16 +60,36 @@ func Line(datagram []byte) string {
 	if loc := stamp.FindIndex(b); loc != nil {
 		b = b[loc[1]:]
 	}
-	line := string(b)
+	var out bytes.Buffer
+	out.WriteString(Prefix)
 	if severity >= 0 && severity <= 3 {
-		line = "error: " + line
+		out.WriteString("error: ")
 	}
-	return line
+	for _, c := range b {
+		if c < 0x20 || c == 0x7f {
+			fmt.Fprintf(&out, `\x%02x`, c)
+			continue
+		}
+		out.WriteByte(c)
+	}
+	return out.String()
 }
 
+// The relay keeps reading whatever it can write: a datagram is read at once
+// and queued, and dropped when the queue is full or more than ratePerSecond
+// came in the last second. A sender to a unix datagram socket waits while the
+// receiver's queue is full, so a relay that stopped reading would have held
+// OpenDKIM in syslog(3) - with mail waiting on it (review of audit stage 5) -
+// and a flood would have filled the container's log.
+const (
+	queueLen      = 1024
+	ratePerSecond = 200
+)
+
 // Run listens on a datagram socket at path, which anyone in the container may
 // write to, and writes each message to w as a line until the socket fails.
-// /dev/log is a link to path (build/entrypoint.sh).
+// /dev/log is a link to path (build/entrypoint.sh). What it drops it says,
+// once a second at most.
 func Run(path string, w io.Writer) error {
 	_ = os.Remove(path)
 	conn, err := net.ListenUnixgram("unixgram", &net.UnixAddr{Name: path, Net: "unixgram"})
@@ -73,15 +102,45 @@ func Run(path string, w io.Writer) error {
 	if err := os.Chmod(path, 0o666); err != nil {
 		return fmt.Errorf("syslog relay: %w", err)
 	}
+
+	lines := make(chan string, queueLen)
+	go func() {
+		for l := range lines {
+			fmt.Fprintln(w, l)
+		}
+	}()
+	defer close(lines)
+
 	buf := make([]byte, 64<<10)
+	var second time.Time
+	inSecond, dropped := 0, 0
 	for {
 		n, _, err := conn.ReadFromUnix(buf)
 		if err != nil {
 			return fmt.Errorf("syslog relay: read: %w", err)
 		}
+		now := time.Now()
+		if now.Sub(second) >= time.Second {
+			if dropped > 0 {
+				select {
+				case lines <- Prefix + "relay: dropped " + strconv.Itoa(dropped) + " lines - more than " + strconv.Itoa(ratePerSecond) + " a second, or the log was not taking them":
+				default:
+				}
+			}
+			second, inSecond, dropped = now, 0, 0
+		}
+		inSecond++
 		if n == 0 {
 			continue
 		}
-		fmt.Fprintln(w, Line(buf[:n]))
+		if inSecond > ratePerSecond {
+			dropped++
+			continue
+		}
+		select {
+		case lines <- Line(buf[:n]):
+		default:
+			dropped++
+		}
 	}
 }
diff --git a/internal/syslogrelay/syslogrelay_test.go b/internal/syslogrelay/syslogrelay_test.go
index c7f0705..eed1eff 100644
--- a/internal/syslogrelay/syslogrelay_test.go
+++ b/internal/syslogrelay/syslogrelay_test.go
@@ -13,11 +13,13 @@ import (
 
 func TestLine(t *testing.T) {
 	for in, want := range map[string]string{
-		"<22>Oct 15 09:00:00 opendkim[45]: 3A2B: DKIM-Signature field added (s=sp, d=example.com)\n": "opendkim[45]: 3A2B: DKIM-Signature field added (s=sp, d=example.com)",
-		"<19>Oct  5 09:00:00 opendkim[45]: key retrieval failed":                                     "error: opendkim[45]: key retrieval failed",
-		"<20>opendkim[45]: no timestamp":                                                             "opendkim[45]: no timestamp",
-		"not syslog at all":                                                                          "not syslog at all",
-		"<x>Oct 15 09:00:00 odd":                                                                     "<x>Oct 15 09:00:00 odd",
+		"<22>Oct 15 09:00:00 opendkim[45]: 3A2B: DKIM-Signature field added (s=sp, d=example.com)\n": "syslog: opendkim[45]: 3A2B: DKIM-Signature field added (s=sp, d=example.com)",
+		"<19>Oct  5 09:00:00 opendkim[45]: key retrieval failed":                                     "syslog: error: opendkim[45]: key retrieval failed",
+		"<20>opendkim[45]: no timestamp":                                                             "syslog: opendkim[45]: no timestamp",
+		"not syslog at all":                                                                          "syslog: not syslog at all",
+		"<x>Oct 15 09:00:00 odd":                                                                     "syslog: <x>Oct 15 09:00:00 odd",
+		// A line of its own cannot be made: a newline inside is written out.
+		"<14>opendkim[1]: one\npanel: forged": `syslog: opendkim[1]: one\x0apanel: forged`,
 	} {
 		if got := Line([]byte(in)); got != want {
 			t.Errorf("Line(%q) = %q, want %q", in, got, want)
@@ -43,26 +45,32 @@ func (s *syncBuffer) String() string {
 	return s.b.String()
 }
 
-// What a program sends to the socket comes out as a line.
-func TestRunRelaysADatagram(t *testing.T) {
+// startRelay runs the relay on a socket of its own and returns a connection
+// to it.
+func startRelay(t *testing.T, w *syncBuffer) net.Conn {
+	t.Helper()
 	if runtime.GOOS == "windows" {
 		t.Skip("no unixgram sockets on Windows; the container is Linux")
 	}
 	path := filepath.Join(t.TempDir(), "log")
-	out := &syncBuffer{}
-	go Run(path, out)
+	go Run(path, w)
 	var conn net.Conn
 	var err error
 	for i := 0; i < 50; i++ {
 		if conn, err = net.Dial("unixgram", path); err == nil {
-			break
+			t.Cleanup(func() { conn.Close() })
+			return conn
 		}
 		time.Sleep(20 * time.Millisecond)
 	}
-	if err != nil {
-		t.Fatal(err)
-	}
-	defer conn.Close()
+	t.Fatal(err)
+	return nil
+}
+
+// What a program sends to the socket comes out as a line.
+func TestRunRelaysADatagram(t *testing.T) {
+	out := &syncBuffer{}
+	conn := startRelay(t, out)
 	if _, err := conn.Write([]byte("<19>Oct 15 09:00:00 opendkim[7]: can't load key")); err != nil {
 		t.Fatal(err)
 	}
@@ -70,7 +78,33 @@ func TestRunRelaysADatagram(t *testing.T) {
 	for time.Now().Before(deadline) && !strings.Contains(out.String(), "\n") {
 		time.Sleep(10 * time.Millisecond)
 	}
-	if got := out.String(); got != "error: opendkim[7]: can't load key\n" {
+	if got := out.String(); got != "syslog: error: opendkim[7]: can't load key\n" {
 		t.Errorf("relayed %q", got)
 	}
 }
+
+// A flood is cut at the rate, and what was dropped is said.
+func TestRunDropsAFlood(t *testing.T) {
+	out := &syncBuffer{}
+	conn := startRelay(t, out)
+	for i := 0; i < ratePerSecond+100; i++ {
+		if _, err := conn.Write([]byte("<14>flood")); err != nil {
+			t.Fatal(err)
+		}
+	}
+	time.Sleep(1100 * time.Millisecond)
+	if _, err := conn.Write([]byte("<14>after")); err != nil {
+		t.Fatal(err)
+	}
+	deadline := time.Now().Add(2 * time.Second)
+	for time.Now().Before(deadline) && !strings.Contains(out.String(), "syslog: after") {
+		time.Sleep(10 * time.Millisecond)
+	}
+	got := out.String()
+	if n := strings.Count(got, "syslog: flood\n"); n != ratePerSecond {
+		t.Errorf("%d flood lines written, want %d", n, ratePerSecond)
+	}
+	if !strings.Contains(got, "syslog: relay: dropped 100 lines") {
+		t.Errorf("the drop was not said:\n%s", got)
+	}
+}
diff --git a/test/e2e/hostname_gate_test.go b/test/e2e/hostname_gate_test.go
index e498db2..b94ac50 100644
--- a/test/e2e/hostname_gate_test.go
+++ b/test/e2e/hostname_gate_test.go
@@ -1,6 +1,8 @@
 package e2e
 
 import (
+	"context"
+	"fmt"
 	"os"
 	"os/exec"
 	"strings"
@@ -13,7 +15,7 @@ import (
 // build/entrypoint.sh runs and fails before anything else needs them) with
 // hostnameEnv substituted for SELFPOST_HOSTNAME, and returns its combined
 // output and whether it exited zero.
-func runEntrypoint(t *testing.T, hostnameEnv string) (output string, exitedZero bool) {
+func runEntrypoint(t *testing.T, hostnameEnv string, env ...string) (output string, exitedZero bool) {
 	t.Helper()
 	dataDir := t.TempDir()
 	// Entrypoint also chmod 755 /data; mirror that here so a pre-fix image
@@ -23,13 +25,19 @@ func runEntrypoint(t *testing.T, hostnameEnv string) (output string, exitedZero
 		t.Fatalf("chmod data dir: %v", err)
 	}
 
-	args := []string{
-		"run", "--rm",
-		"-e", "SELFPOST_HOSTNAME=" + hostnameEnv,
-		"-v", dataDir + ":/data",
-		"selfpost:e2e",
+	// A name of its own, so a run that outlives its minute is removed.
+	name := fmt.Sprintf("selfpost-gate-%d", time.Now().UnixNano())
+	defer exec.Command("docker", "rm", "-f", name).Run()
+	args := []string{"run", "--rm", "--name", name, "-e", "SELFPOST_HOSTNAME=" + hostnameEnv}
+	for _, e := range env {
+		args = append(args, "-e", e)
 	}
-	cmd := exec.Command("docker", args...)
+	args = append(args, "-v", dataDir+":/data", "selfpost:e2e")
+	// A start that gets past every gate runs on: it is ended after a minute
+	// rather than holding the run until the test binary's own timeout.
+	ctx, cancel := context.WithTimeout(context.Background(), time.Minute)
+	defer cancel()
+	cmd := exec.CommandContext(ctx, "docker", args...)
 	cmd.Env = os.Environ()
 	out, err := cmd.CombinedOutput()
 	return string(out), err == nil
@@ -114,3 +122,33 @@ func runEntrypointBackground(t *testing.T, hostnameEnv string) (output string, s
 	logs, _ := exec.Command("docker", "logs", name).CombinedOutput()
 	return string(logs), err == nil
 }
+
+// A setting Postfix takes as a number or a time value stops the start when it
+// is neither, naming the variable: before, it passed `postfix check` and every
+// smtpd died at its first connection (audit 2026-10-12, L31). A sensible
+// value of the same form gets past the check (and the start fails later, for
+// what this bare run lacks).
+func TestNumericSettingsGate(t *testing.T) {
+	for _, c := range []struct{ env, want string }{
+		{"RATE_LIMIT_MESSAGES_PER_IP=100/h", "RATE_LIMIT_MESSAGES_PER_IP must be a whole number, got '100/h'"},
+		{"INBOUND_MESSAGE_SIZE_LIMIT=10MB", "INBOUND_MESSAGE_SIZE_LIMIT must be a whole number, got '10MB'"},
+		{"MILTER_CONTENT_TIMEOUT=thirty", "MILTER_CONTENT_TIMEOUT must be a time value"},
+		// Under the parameter's minimum: anvil and smtpd die on a zero.
+		{"RATE_LIMIT_WINDOW_SECONDS=0", "RATE_LIMIT_WINDOW_SECONDS must be from 1 to 2147483647, got '0'"},
+		{"MILTER_COMMAND_TIMEOUT=0s", "MILTER_COMMAND_TIMEOUT must be a time value"},
+		{"INBOUND_MESSAGE_SIZE_LIMIT=99999999999", "INBOUND_MESSAGE_SIZE_LIMIT must be from 0 to 2147483647"},
+	} {
+		t.Run(c.env, func(t *testing.T) {
+			out, ok := runEntrypoint(t, "mail.example.com", c.env)
+			if ok || !strings.Contains(out, c.want) {
+				t.Fatalf("%s: exited zero %v, want the refusal %q\noutput:\n%s", c.env, ok, c.want, out)
+			}
+		})
+	}
+	// Good values beside a bad one checked after them: the refusal names the
+	// bad one alone. (A start with good values only would run on.)
+	out, _ := runEntrypoint(t, "mail.example.com", "RATE_LIMIT_MESSAGES_PER_IP=50", "MILTER_CONNECT_TIMEOUT=2m", "MILTER_CONTENT_TIMEOUT=bad")
+	if !strings.Contains(out, "MILTER_CONTENT_TIMEOUT must be") || strings.Contains(out, "RATE_LIMIT_MESSAGES_PER_IP must") || strings.Contains(out, "MILTER_CONNECT_TIMEOUT must") {
+		t.Errorf("valid values refused:\n%s", out)
+	}
+}
diff --git a/test/e2e/logrotate_check.go b/test/e2e/logrotate_check.go
index c4ade23..115354f 100644
--- a/test/e2e/logrotate_check.go
+++ b/test/e2e/logrotate_check.go
@@ -7,6 +7,7 @@ import (
 	"path/filepath"
 	"strings"
 	"testing"
+	"time"
 )
 
 // checkLogrotateConfigMode verifies the image pins /etc/logrotate.d/mail at 0644
@@ -21,7 +22,14 @@ func checkLogrotateConfigMode(s *stack) error {
 	if mode != "644" {
 		return fmt.Errorf("/etc/logrotate.d/mail mode is %q, want 644", mode)
 	}
-	return nil
+	// The state file is beside the log, under /data, so a recreated container
+	// keeps when mail.log was last rotated (audit 2026-10-12, M19); the loop
+	// runs logrotate at once when it starts.
+	return waitFor("logrotate's state under /data/log", 20*time.Second, 500*time.Millisecond, func() (bool, error) {
+		out, _ := s.execIn("selfpost", "sh", "-c", "test -s /data/log/.logrotate.status && echo yes")
+		out = strings.TrimSpace(out)
+		return out == "yes", fmt.Errorf("state file: %q", out)
+	})
 }
 
 // checkLogrotateRotation forces a rotation and checks the recreated mail.log is
diff --git a/test/e2e/main_test.go b/test/e2e/main_test.go
index 64f38b9..19b5979 100644
--- a/test/e2e/main_test.go
+++ b/test/e2e/main_test.go
@@ -116,6 +116,9 @@ func TestE2E(t *testing.T) {
 		if err := checkOpenDKIMLogs(h); err != nil {
 			t.Fatal(err)
 		}
+		if err := checkPostfixHardening(h); err != nil {
+			t.Fatal(err)
+		}
 		if err := checkInboundRelayOff(h); err != nil {
 			t.Fatal(err)
 		}
diff --git a/test/e2e/process_check.go b/test/e2e/process_check.go
index 3b90e80..3f076fa 100644
--- a/test/e2e/process_check.go
+++ b/test/e2e/process_check.go
@@ -141,3 +141,18 @@ func checkOpenDKIMLogs(s *stack) error {
 		return strings.Contains(out, "opendkim[") && strings.Contains(out, "OpenDKIM Filter v"), fmt.Errorf("no OpenDKIM line in the log")
 	})
 }
+
+// checkPostfixHardening reads back what postfix-config.sh sets against
+// downgrade and enumeration (audit 2026-10-12, L31).
+func checkPostfixHardening(s *stack) error {
+	out, err := s.execIn("selfpost", "postconf", "-h", "smtpd_tls_protocols", "smtpd_tls_mandatory_protocols", "disable_vrfy_command", "smtpd_banner")
+	if err != nil {
+		return fmt.Errorf("postconf: %v\n%s", err, out)
+	}
+	got := strings.Split(strings.TrimSpace(out), "\n")
+	want := []string{">=TLSv1.2", ">=TLSv1.2", "yes", "$myhostname ESMTP"}
+	if strings.Join(got, "|") != strings.Join(want, "|") {
+		return fmt.Errorf("postconf -h of the hardened settings = %q, want %q", got, want)
+	}
+	return nil
+}