docs: add roadmap plans for domain stats, auto rate limit, and send-log retention

Co-authored-by: Cursor <cursoragent@cursor.com>

CHANGELOG.md

@@ -7,6 +7,25 @@ Format follows [Keep a Changelog](https://keepachangelog.com/en/1.1.0/); version
 
 ### Added
 
+- docs: roadmap candidates **send-log-retention** (panel Settings for delivery
+  journal retention) and **domain-stats-auto-ratelimit** (30-day send stats per
+  domain/application, auto level-2 rate limit from avg × multiplier) — plans in
+  [docs/plans/](docs/plans/).
+
+- Postfix queue under `/data/postfix/queue` — deferred and active mail survive
+  container recreate and are included in full backups.
+- Full backup archives the whole operator project: `data/`, `docker-compose.yml`,
+  `.env`, and `certs/` (requires `.:/selfpost-deploy:ro` in compose). Restore
+  by unpacking into an empty project directory.
+
+### Changed
+
+- **Breaking:** full-backup archive layout — paths are prefixed with `data/`;
+  deploy files sit at the archive root. Old flat archives restore with
+  `tar xzf backup.tar.gz -C ./data` as before.
+- docs: operator guide, architecture, security, and backup UI updated for
+  self-contained backups and persistent queue.
+
 - docs: HTML mockups for a full panel UI refresh
   ([docs/assets/panel-ui/](docs/assets/panel-ui/index.html)) — current screens,
   agreed and candidate roadmap surfaces (queue-retries, inbound-relay,

build/entrypoint.sh

@@ -69,7 +69,7 @@ chmod 755 /data
 # later phase deliberately hands to another service. /data/log is exempt: it is
 # deliberately owned by postfix (postlogd writes the delivery log there) and is
 # normalised on its own below.
-find /data -mindepth 1 -maxdepth 1 ! -user panel ! -name log -exec chown -R panel:panel {} +
+find /data -mindepth 1 -maxdepth 1 ! -user panel ! -name log ! -name postfix -exec chown -R panel:panel {} +
 
 # DKIM key tree (spec 6, 9). The panel (user `panel`) generates keys and writes
 # the OpenDKIM tables; OpenDKIM (user `opendkim`) must read them. Normalise the
@@ -99,13 +99,13 @@ chown -R panel:selfpost /data/sasl
 chmod 2750 /data/sasl
 [ -e /data/sasl/sasldb2 ] && chmod 0640 /data/sasl/sasldb2
 
-# Postfix sender_login_maps (spec 5.1). The panel writes it; Postfix reads it.
+# Postfix state under /data (spec 5.1, architecture.md § Persistence). The panel
-# Ensure the file exists (empty is fine) before Postfix starts so a reload that
+# writes sender_login_maps; Postfix owns the on-disk queue tree under queue/.
-# references it never fails on a missing file, and keep it group-readable.
+mkdir -p /data/postfix/queue
-mkdir -p /data/postfix
 [ -e /data/postfix/sender_login_maps ] || : > /data/postfix/sender_login_maps
-chown -R panel:selfpost /data/postfix
+chown panel:selfpost /data/postfix
 chmod 2750 /data/postfix
+chown panel:selfpost /data/postfix/sender_login_maps
 chmod 0640 /data/postfix/sender_login_maps
 
 # Delivery log (architecture.md § Log tailer). postlogd writes it as user
@@ -144,4 +144,11 @@ chmod 2750 /run/opendkim /run/selfpost
 # start the same way the /data normalisation above is.
 /usr/local/bin/postfix-config.sh
 
+# Initialise the persistent queue tree on first start or after restore. postfix
+# set-permissions reads queue_directory from main.cf (set by postfix-config.sh).
+if [ ! -d /data/postfix/queue/active ]; then
+	postfix set-permissions
+fi
+chown -R postfix:postfix /data/postfix/queue
+
 exec /usr/bin/supervisord -c /etc/supervisor/supervisord.conf

build/postfix-config.sh

@@ -57,6 +57,9 @@ JOURNAL_SOCK="${JOURNAL_MILTER_SOCKET:-/run/selfpost/journal.sock}"
 # Persistent panel-managed sender map (spec 5.1); texthash needs no postmap, so
 # the unprivileged panel can rewrite it and just ask for a reload.
 SENDER_LOGIN_MAPS="${POSTFIX_SENDER_LOGIN_MAPS:-/data/postfix/sender_login_maps}"
+# Transit mail queue under /data so deferred/active messages survive container
+# recreate (architecture.md § Persistence). Distinct from sender_login_maps.
+QUEUE_DIR="${POSTFIX_QUEUE_DIR:-/data/postfix/queue}"
 SASLDB_PATH="${SASL_DB_PATH:-/data/sasl/sasldb2}"
 
 # Optional submission service on 587 (spec 5 p.1: off by default, enabled only
@@ -128,7 +131,8 @@ postconf -e \
 # resolves the full address first, then the "@domain" wildcard, so both address
 # modes work from the same map.
 postconf -e \
-	"smtpd_sender_login_maps=texthash:${SENDER_LOGIN_MAPS}"
+	"smtpd_sender_login_maps=texthash:${SENDER_LOGIN_MAPS}" \
+	"queue_directory=${QUEUE_DIR}"
 
 # Restrictions: authenticated clients only, no relay to foreign destinations,
 # and every authenticated sender address must be owned by its login. NO

cmd/panel/envdoc_test.go

@@ -33,6 +33,8 @@ var documentedInternal = []string{
 	"SASL_REALM",
 	"POSTFIX_DIR",
 	"POSTFIX_SENDER_LOGIN_MAPS",
+	"POSTFIX_QUEUE_DIR",
+	"SELFPOST_DEPLOY_ROOT",
 	"MILTER_CONNECT_TIMEOUT",
 	"MILTER_COMMAND_TIMEOUT",
 	"MILTER_CONTENT_TIMEOUT",
@@ -70,6 +72,7 @@ var loadConfigKeys = []string{
 	"SASL_DB_PATH",
 	"SASL_REALM",
 	"POSTFIX_DIR",
+	"SELFPOST_DEPLOY_ROOT",
 }
 
 // buildScriptKeys is every ${VAR:-…} / os.Getenv used in build/*.sh and entrypoint.sh
@@ -84,6 +87,7 @@ var buildScriptKeys = []string{
 	"JOURNAL_MILTER_SOCKET",
 	"MAIL_LOG",
 	"POSTFIX_SENDER_LOGIN_MAPS",
+	"POSTFIX_QUEUE_DIR",
 	"SASL_DB_PATH",
 	"SUBMISSION_ENABLE",
 	"MILTER_CONNECT_TIMEOUT",

cmd/panel/httpserver.go

@@ -73,6 +73,7 @@ func newPanel(cfg config, st *store.Store) (*web.Server, error) {
 		MailLogPath:            cfg.mailLog,
 		DataDir:                cfg.dataDir,
 		DBPath:                 cfg.dbPath,
+		DeployRoot:             cfg.deployRoot,
 		Version:                buildinfo.Version,
 		TrustedProxyCIDRs:      cfg.trustedProxies,
 		TLSCertFile:            cfg.tlsCertFile,

cmd/panel/main.go

@@ -78,6 +78,7 @@ type config struct {
 	saslDBPath string
 	saslRealm  string
 	postfixDir string
+	deployRoot string
 }
 
 func loadConfig() config {
@@ -138,6 +139,7 @@ func loadConfig() config {
 		saslDBPath: envDefault("SASL_DB_PATH", filepath.Join(dataDir, "sasl", "sasldb2")),
 		saslRealm:  saslRealm(),
 		postfixDir: envDefault("POSTFIX_DIR", filepath.Join(dataDir, "postfix")),
+		deployRoot: envDefault("SELFPOST_DEPLOY_ROOT", "/selfpost-deploy"),
 	}
 }
 

cmd/panel/restore_test.go

@@ -22,7 +22,7 @@ import (
 )
 
 // Restoring a SelfPost backup is not a code path in the panel: the operator
-// extracts the archive into the /data bind mount and starts the image, and the
+// extracts the archive into a project directory and starts the image, and the
 // panel is expected to come up on it (architecture.md § Persistence). Nothing
 // below stubs that story out — the archive is downloaded from a running panel
 // through /backup, unpacked the way `tar -xzf` unpacks it, and a second panel
@@ -37,9 +37,10 @@ const (
 
 // restored is the outcome of a full backup-and-restore round trip.
 type restored struct {
-	panel   http.Handler // panel booted on the restored data directory
+	panel      http.Handler // panel booted on the restored data directory
-	dataDir string       // the restored /data
+	deployRoot string       // the restored project directory
-	session *http.Cookie // a session opened before the backup was taken
+	dataDir    string       // the restored /data
+	session    *http.Cookie // a session opened before the backup was taken
 }
 
 // restoreFromOwnBackup runs the operator's path end to end: seed a panel that
@@ -50,7 +51,7 @@ type restored struct {
 func restoreFromOwnBackup(t *testing.T, password string) restored {
 	t.Helper()
 
-	live := seedPanelData(t)
+	live := seedPanelProject(t)
 	panel := bootPanel(t, live)
 	session := signIn(t, panel)
 	archive := downloadBackup(t, panel, session, password)
@@ -58,7 +59,12 @@ func restoreFromOwnBackup(t *testing.T, password string) restored {
 	target := t.TempDir()
 	extract(t, archive, target)
 
-	return restored{panel: bootPanel(t, target), dataDir: target, session: session}
+	return restored{
+		panel:      bootPanel(t, target),
+		deployRoot: target,
+		dataDir:    filepath.Join(target, "data"),
+		session:    session,
+	}
 }
 
 // The panel has to come up on the restored directory and show the state that
@@ -91,6 +97,12 @@ func TestPanelBootsOnADataDirectoryRestoredFromItsOwnBackup(t *testing.T) {
 			t.Errorf("%s = %q, want %q", path, got, want)
 		}
 	}
+
+	for _, name := range []string{backup.ComposeFileName, backup.EnvFileName} {
+		if _, err := os.Stat(filepath.Join(r.deployRoot, name)); err != nil {
+			t.Errorf("the restored project directory has no %s: %v", name, err)
+		}
+	}
 }
 
 // The one-time setup link is closed by the presence of a panel user, and the
@@ -138,8 +150,9 @@ func TestAnEncryptedBackupRestoresTheSameWay(t *testing.T) {
 // A restore boot runs one Resync from SQLite. If the archive's Postfix map
 // drifted from the database, that step puts it back before mail flows.
 func TestResyncAfterRestoreHealsDriftedMaps(t *testing.T) {
-	dataDir := seedPanelData(t)
+	deployRoot := seedPanelProject(t)
-	cfg := panelConfig(t, dataDir)
+	dataDir := filepath.Join(deployRoot, "data")
+	cfg := panelConfig(t, deployRoot)
 
 	mapPath := filepath.Join(dataDir, "postfix", "sender_login_maps")
 	if err := os.WriteFile(mapPath, []byte("stale map\n"), 0o640); err != nil {
@@ -191,12 +204,14 @@ func TestResyncAfterRestoreHealsDriftedMaps(t *testing.T) {
 // stays put on a mismatch: the operator's next move is to start the image the
 // backup names, and it has to be there when they do.
 func TestPanelRefusesADataDirectoryRestoredFromAnotherVersion(t *testing.T) {
-	live := seedPanelData(t)
+	deployRoot := seedPanelProject(t)
+	dataDir := filepath.Join(deployRoot, "data")
 	var archive bytes.Buffer
 	if err := backup.Create(&archive, backup.Params{
-		DataDir: live,
+		DataDir:    dataDir,
-		DBPath:  filepath.Join(live, "selfpost.db"),
+		DBPath:     filepath.Join(dataDir, "selfpost.db"),
-		Version: "9.9.9",
+		Version:    "9.9.9",
+		DeployRoot: deployRoot,
 	}); err != nil {
 		t.Fatalf("create backup: %v", err)
 	}
@@ -218,13 +233,15 @@ func TestPanelRefusesADataDirectoryRestoredFromAnotherVersion(t *testing.T) {
 	}
 }
 
-// seedPanelData builds the /data tree of a panel that has been in use: an
+// seedPanelProject builds an operator project tree: data/ with a panel that has
-// administrator, a sending domain with an application and one logged message,
+// been in use, plus docker-compose.yml, .env, and certs/ for full backups.
-// and the daemon state the mail path needs (a DKIM key, the SASL database and
+func seedPanelProject(t *testing.T) string {
-// Postfix's sender map).
-func seedPanelData(t *testing.T) string {
 	t.Helper()
-	dataDir := t.TempDir()
+	deployRoot := t.TempDir()
+	dataDir := filepath.Join(deployRoot, "data")
+	if err := os.MkdirAll(dataDir, 0o750); err != nil {
+		t.Fatalf("mkdir data: %v", err)
+	}
 
 	st, err := store.Open(filepath.Join(dataDir, "selfpost.db"))
 	if err != nil {
@@ -268,16 +285,33 @@ func seedPanelData(t *testing.T) string {
 			t.Fatalf("write %s: %v", full, err)
 		}
 	}
-	return dataDir
+
+	writeDeployFile(t, filepath.Join(deployRoot, backup.ComposeFileName), "services:\n  selfpost:\n    image: test\n")
+	writeDeployFile(t, filepath.Join(deployRoot, backup.EnvFileName), "SELFPOST_HOSTNAME=mail.example.ru\n")
+	writeDeployFile(t, filepath.Join(deployRoot, backup.CertsDirName, "fullchain.pem"), "CERT")
+	writeDeployFile(t, filepath.Join(deployRoot, backup.CertsDirName, "privkey.pem"), "KEY")
+	return deployRoot
 }
 
-// panelConfig resolves the panel's own configuration for a data directory, so
+func writeDeployFile(t *testing.T, path, content string) {
+	t.Helper()
+	if err := os.MkdirAll(filepath.Dir(path), 0o750); err != nil {
+		t.Fatalf("mkdir %s: %v", path, err)
+	}
+	if err := os.WriteFile(path, []byte(content), 0o640); err != nil {
+		t.Fatalf("write %s: %v", path, err)
+	}
+}
+
+// panelConfig resolves the panel's own configuration for a project directory, so
 // the test finds the files where the running binary would look for them rather
 // than where it put them. Cookies are marked insecure for the same reason the
 // e2e stand does it: the test client speaks plain HTTP.
-func panelConfig(t *testing.T, dataDir string) config {
+func panelConfig(t *testing.T, deployRoot string) config {
 	t.Helper()
+	dataDir := filepath.Join(deployRoot, "data")
 	t.Setenv("SELFPOST_DATA_DIR", dataDir)
+	t.Setenv("SELFPOST_DEPLOY_ROOT", deployRoot)
 	t.Setenv("PANEL_COOKIE_SECURE", "false")
 	t.Setenv("SELFPOST_HOSTNAME", "mail.example.ru")
 	// MAIL_LOG's default is an absolute path, not one derived from the data
@@ -288,13 +322,13 @@ func panelConfig(t *testing.T, dataDir string) config {
 
 // bootPanel performs the startup sequence run() performs, in the same order,
 // and returns the panel's HTTP handler.
-func bootPanel(t *testing.T, dataDir string) http.Handler {
+func bootPanel(t *testing.T, deployRoot string) http.Handler {
 	t.Helper()
-	cfg := panelConfig(t, dataDir)
+	cfg := panelConfig(t, deployRoot)
 
 	restored, err := backup.CheckRestore(cfg.manifestPath, buildinfo.Version)
 	if err != nil {
-		t.Fatalf("the panel refused to start on %s: %v", dataDir, err)
+		t.Fatalf("the panel refused to start on %s: %v", deployRoot, err)
 	}
 	if restored {
 		if _, err := os.Stat(cfg.manifestPath); err == nil {
@@ -380,8 +414,8 @@ func downloadBackup(t *testing.T, h http.Handler, session *http.Cookie, password
 	return plain
 }
 
-// extract unpacks a backup archive into dir, as `tar -xzf` does onto the /data
+// extract unpacks a backup archive into dir, as `tar -xzf` does onto the project
-// bind mount before the image is started.
+// directory before the image is started.
 func extract(t *testing.T, archive []byte, dir string) {
 	t.Helper()
 	gz, err := gzip.NewReader(bytes.NewReader(archive))

cmd/selfpost-backup/main.go

@@ -6,9 +6,9 @@
 //
 //	docker exec <container> selfpost-backup > selfpost-backup.tar.gz
 //
-// Use -o to write to a file instead. The resulting archive contains DKIM private
+// Use -o to write to a file instead. The resulting archive is self-contained:
-// keys, the admin password hash and SASL credentials — treat it as a secret
+// data/, docker-compose.yml, .env, and certs/ when present — treat it as a
-// (architecture.md § Persistence).
+// secret (architecture.md § Persistence).
 //
 // Given a password (SELFPOST_BACKUP_PASSWORD or -password-file, never an
 // argument, which would show up in the process list) the archive is written as
@@ -87,9 +87,13 @@ func run(outPath, password string) error {
 	}
 
 	if err := backup.Create(sink, backup.Params{
-		DataDir: dataDir,
+		DataDir:    dataDir,
-		DBPath:  dbPath,
+		DBPath:     dbPath,
-		Version: buildinfo.Version,
+		Version:    buildinfo.Version,
+		DeployRoot: envDefault("SELFPOST_DEPLOY_ROOT", "/selfpost-deploy"),
+		OnWarn: func(msg string) {
+			fmt.Fprintf(os.Stderr, "selfpost-backup: %s\n", msg)
+		},
 	}); err != nil {
 		return err
 	}

cmd/selfpost-backup/main_test.go

@@ -9,13 +9,18 @@ import (
 	"strings"
 	"testing"
 
+	"github.com/mixeme/selfpost/internal/backup"
 	"github.com/mixeme/selfpost/internal/store"
 )
 
-// seedDataDir builds the minimum /data tree a backup can be taken from.
+// seedProject builds the minimum operator project tree a backup can be taken from.
-func seedDataDir(t *testing.T) string {
+func seedProject(t *testing.T) (deployRoot, dataDir string) {
 	t.Helper()
-	dataDir := t.TempDir()
+	deployRoot = t.TempDir()
+	dataDir = filepath.Join(deployRoot, "data")
+	if err := os.MkdirAll(dataDir, 0o750); err != nil {
+		t.Fatalf("mkdir data: %v", err)
+	}
 	st, err := store.Open(filepath.Join(dataDir, "selfpost.db"))
 	if err != nil {
 		t.Fatalf("open store: %v", err)
@@ -26,16 +31,31 @@ func seedDataDir(t *testing.T) string {
 	if err := st.Close(); err != nil {
 		t.Fatalf("close store: %v", err)
 	}
+	writeFile(t, filepath.Join(deployRoot, backup.ComposeFileName), "services:\n  selfpost:\n    image: test\n")
+	writeFile(t, filepath.Join(deployRoot, backup.EnvFileName), "SELFPOST_HOSTNAME=mail.example.com\n")
+	writeFile(t, filepath.Join(deployRoot, backup.CertsDirName, "fullchain.pem"), "CERT")
+	writeFile(t, filepath.Join(deployRoot, backup.CertsDirName, "privkey.pem"), "KEY")
 	t.Setenv("SELFPOST_DATA_DIR", dataDir)
 	t.Setenv("SELFPOST_DB_PATH", filepath.Join(dataDir, "selfpost.db"))
-	return dataDir
+	t.Setenv("SELFPOST_DEPLOY_ROOT", deployRoot)
+	return deployRoot, dataDir
+}
+
+func writeFile(t *testing.T, path, content string) {
+	t.Helper()
+	if err := os.MkdirAll(filepath.Dir(path), 0o750); err != nil {
+		t.Fatalf("mkdir %s: %v", path, err)
+	}
+	if err := os.WriteFile(path, []byte(content), 0o640); err != nil {
+		t.Fatalf("write %s: %v", path, err)
+	}
 }
 
 // An encrypted backup is only worth having if the container it came from can
 // hand it back as an ordinary archive during a restore, so the two halves of
 // the CLI are tested as the one round trip an operator actually performs.
 func TestEncryptedBackupRoundTrip(t *testing.T) {
-	seedDataDir(t)
+	seedProject(t)
 	dir := t.TempDir()
 	encrypted := filepath.Join(dir, "backup.spbk")
 	plain := filepath.Join(dir, "backup.tar.gz")
@@ -81,7 +101,12 @@ func TestEncryptedBackupRoundTrip(t *testing.T) {
 		}
 		names[hdr.Name] = true
 	}
-	for _, want := range []string{"manifest.json", "selfpost.db"} {
+	for _, want := range []string{
+		backup.DataArchivePrefix + backup.ManifestName,
+		backup.DataArchivePrefix + "selfpost.db",
+		backup.ComposeFileName,
+		backup.EnvFileName,
+	} {
 		if !names[want] {
 			t.Errorf("decrypted archive has no %s (entries: %v)", want, names)
 		}
@@ -91,7 +116,7 @@ func TestEncryptedBackupRoundTrip(t *testing.T) {
 // Without a password the CLI keeps producing the plain archive that existing
 // backup scripts consume.
 func TestUnencryptedBackupStaysPlain(t *testing.T) {
-	seedDataDir(t)
+	seedProject(t)
 	out := filepath.Join(t.TempDir(), "backup.tar.gz")
 	if err := run(out, ""); err != nil {
 		t.Fatalf("create backup: %v", err)

deploy/caddy/docker-compose.caddy.yml

@@ -31,6 +31,7 @@ services:
       TLS_KEY_FILE: /etc/postfix/tls/<hostname>.key
     volumes: !override
       - ./data:/data
+      - .:/selfpost-deploy:ro
       # Replace <hostname> with your actual mail/panel hostname, matching
       # the Caddyfile below and SELFPOST_HOSTNAME.
       - ./caddy/caddy-data/caddy/certificates/acme-v02.api.letsencrypt.org-directory/<hostname>:/etc/postfix/tls:ro

deploy/docker-compose.yml

@@ -58,6 +58,9 @@ services:
       # kept) so the delivery lines that resolve a queued send-log row survive
       # a container recreate; it is diagnostics and is left out of backups.
       - ./data:/data
+      # Read-only project root for full backups: docker-compose.yml, .env, and
+      # certs/ are archived alongside /data (architecture.md § Persistence).
+      - .:/selfpost-deploy:ro
       # Read-only: SelfPost only ever reads certificates, never manages them
       # (spec 10 p.2). Point this at wherever your reverse-proxy/certbot
       # writes PEM files, e.g. /etc/letsencrypt on the host.

deploy/nginx/docker-compose.nginx.yml

@@ -27,6 +27,7 @@ services:
       # network at selfpost:8080 instead (see nginx.conf.example).
     volumes: !override
       - ./data:/data
+      - .:/selfpost-deploy:ro
       # Same host directory certbot below writes into — plain bind mount,
       # no named volume, so the PEM files are as directly inspectable as in
       # the Apache scenario (spec 10.3).

deploy/traefik/docker-compose.traefik.yml

@@ -17,6 +17,7 @@ services:
       - "587:587"
     volumes: !override
       - ./data:/data
+      - .:/selfpost-deploy:ro
       # Populated by extract-cert.sh from traefik's acme.json — see below.
       - ./traefik/extracted-certs:/etc/postfix/tls:ro
     labels:

docs/architecture.md

@@ -291,23 +291,27 @@ single-connection trade-off that follows from it.
 | `opendkim/` | DKIM keys + tables |
 | `sasl/sasldb2` | Application SASL credentials |
 | `postfix/sender_login_maps` | Login → From binding |
+| `postfix/queue/` | Postfix transit mail (deferred/active); survives container recreate |
 | `log/mail.log` | Postfix delivery log + rotated copies (excluded from backups) |
 | `manifest.json` | Backup version stamp (consumed on restore) |
 
-Not in `/data`: TLS certificates (reverse-proxy mount), Postfix queue
+Not in `/data`: TLS certificates for the panel (reverse-proxy mount) — though
-(transit mail not migrated by design).
+full backups also archive the operator's `./certs` PEM files when present.
 
 **Rotation:** send-log retention `SEND_LOG_RETENTION_DAYS` (default 90);
 `mail.log` via logrotate (14 rotated files, check every 6h, rename +
 `postfix reload` in `postrotate` — see § Log tailer above).
 
-**Restore:** panel button or `selfpost-backup` CLI — SQLite snapshot + tar of
+**Restore:** panel button or `selfpost-backup` CLI — self-contained archive:
-`/data` tree, minus `log/`, the setup token and any `tls/`; version check on
+`data/` (SQLite snapshot + tree minus `log/`, the setup token and any `tls/`
-restore. On the first successful boot after restore, the panel runs one
+under `/data`), `docker-compose.yml`, `.env`, and `certs/` when present;
-**Resync** — OpenDKIM's tables and Postfix's sender map are re-derived from
+version check on restore. Requires the project directory mounted read-only at
-SQLite and both daemons are reloaded, so drift between the extracted archive
+`SELFPOST_DEPLOY_ROOT` (`/selfpost-deploy` in the default compose file). On the
-and the database is healed before mail flows (same step as `POST /reload` on
+first successful boot after restore, the panel runs one **Resync** — OpenDKIM's
-demand). Stopped-container `tar` of `./data` is safe (see guide).
+tables and Postfix's sender map are re-derived from SQLite and both daemons are
+reloaded, so drift between the extracted archive and the database is healed
+before mail flows (same step as `POST /reload` on demand). Stopped-container
+`tar` of `./data` alone remains possible for state-only copies (see guide).
 
 **Optional encryption** of the two secret-bearing downloads
 ([internal/secretfile](../internal/secretfile/secretfile.go)): password →
@@ -350,7 +354,10 @@ unsupported rather than as a missing doc:
   `POSTFIX_DIR` (`/data/postfix`), `POSTFIX_SENDER_LOGIN_MAPS`
   (`/data/postfix/sender_login_maps` — read by Postfix config only; the panel
   always writes `<POSTFIX_DIR>/sender_login_maps`, so overriding this env alone
-  desyncs the map Postfix reads from the file the panel maintains).
+  desyncs the map Postfix reads from the file the panel maintains),
+  `POSTFIX_QUEUE_DIR` (`/data/postfix/queue` — set in `build/postfix-config.sh`),
+  `SELFPOST_DEPLOY_ROOT` (`/selfpost-deploy` — operator project directory for
+  full backups; mount `.:/selfpost-deploy:ro` in compose).
 - **Milter and Postfix startup:** `MILTER_CONNECT_TIMEOUT` (`15s`),
   `MILTER_COMMAND_TIMEOUT` (`15s`), `MILTER_CONTENT_TIMEOUT` (`30s`),
   `MILTER_WAIT_TIMEOUT` (`30` seconds).

docs/assets/panel-ui/backup.html

@@ -14,7 +14,7 @@
   <div class="pair">
     <div class="card">
       <h2>Full backup</h2>
-      <p class="muted">Download a full backup of all persistent state — the database, every domain’s DKIM key and the application credentials. Restore into a container of the <strong>same SelfPost version</strong>, with the same data mount, before first start. TLS certificates and the mail queue are not included.</p>
+      <p class="muted">Download a self-contained backup — <code>data/</code> (database, DKIM keys, credentials, Postfix queue), <code>docker-compose.yml</code>, <code>.env</code>, and <code>certs/</code>. Extract into an empty project directory on a new machine, adjust hostname if needed, and start the <strong>same SelfPost version</strong> before first boot. The reverse-proxy vhost is not included.</p>
       <p class="muted"><strong>The backup file is a secret.</strong> Encrypting it is the simplest way to store it: the download is then a <code>.spbk</code> that only the password opens.</p>
       <div class="encrypt">
         <label class="check"><input type="checkbox" checked> <span>Encrypt with a password</span></label>

docs/guide.md

@@ -417,25 +417,31 @@ journal-milter (level 2) is down. There is no per-IP bypass.
 
 ### Full backup and restore
 
-**Full backup** (whole `/data` except `log/`: SQLite, all domains' DKIM keys,
+**Full backup** is a self-contained project archive: `data/` (SQLite, all
-all applications' SASL credentials, `manifest.json` with the version that
+domains' DKIM keys, all applications' SASL credentials, the Postfix queue,
-created it): panel button (*Backup* → *Full backup*), or from the host:
+`manifest.json` with the version that created it), plus `docker-compose.yml`,
+`.env`, and `certs/` from the operator directory next to `./data`. Delivery
+logs under `data/log/` are excluded. The base compose file mounts the project
+directory read-only at `/selfpost-deploy` so the panel and CLI can read those
+deploy files — without that mount, *Full backup* refuses with an error.
+
+Take a backup from the panel (*Backup* → *Full backup*) or from the host:
 
 ```sh
 docker exec <container> selfpost-backup > selfpost-backup.tar.gz
 ```
 
-**Restore** means unpacking that archive into a fresh `/data` bind mount and
+**Restore** means unpacking that archive into an **empty project directory**
-starting a container of the **exact same image version** that created it —
+(not into `./data` alone) and starting a container of the **exact same image
-SelfPost refuses to start otherwise and tells you which tag to use. On the
+version** that created it — SelfPost refuses to start otherwise and tells you
-first successful start after restore, `manifest.json` from the archive is
+which tag to use. On the first successful start after restore, `data/manifest.json`
-**deleted** — it guards only that one boot, so a later in-place upgrade is
+from the archive is **deleted** — it guards only that one boot, so a later
-not blocked. On that same first boot the panel also runs one **Resync** —
+in-place upgrade is not blocked. On that same first boot the panel also runs
-OpenDKIM's tables and Postfix's sender map are re-derived from SQLite and both
+one **Resync** — OpenDKIM's tables and Postfix's sender map are re-derived from
-daemons are reloaded, healing any drift between the extracted files and the
+SQLite and both daemons are reloaded, healing any drift between the extracted
-database (the Status page's *Reload configuration* button runs the same step
+files and the database (the Status page's *Reload configuration* button runs
-on demand). This is why the compose file pins a fixed tag rather than
+the same step on demand). This is why the compose file pins a fixed tag rather
-`:latest`: without a known version, there'd be no way to tell which image
+than `:latest`: without a known version, there'd be no way to tell which image
 restoring a given backup actually requires (see [Fixed image
 tag](#fixed-image-tag)).
 
@@ -446,16 +452,16 @@ back after a bad change):
 # 1. Stop the instance being replaced
 docker compose down
 
-# 2. Move the current /data aside rather than deleting it, start from empty
+# 2. Move the current project aside rather than deleting it
-mv ./data ./data.before-restore
+mv . ../selfpost.before-restore
-mkdir ./data
+mkdir selfpost && cd selfpost
 
 # 3. Unpack the backup into the fresh directory
-tar xzf selfpost-backup.tar.gz -C ./data
+tar xzf ../selfpost-backup.tar.gz
 
-# 4. docker-compose.yml must already pin the exact tag the backup was made
+# 4. docker-compose.yml in the archive must pin the exact tag the backup was
-#    with — check the archive's manifest if unsure:
+#    made with — check if unsure:
-tar xzf selfpost-backup.tar.gz -O manifest.json
+tar xzf ../selfpost-backup.tar.gz -O data/manifest.json
 
 # 5. Start it and watch the boot
 docker compose up -d
@@ -473,28 +479,31 @@ Fix the tag in `docker-compose.yml`, `docker compose pull && docker compose up
 -d` again — the manifest is still there because the failed boot never got to
 delete it.
 
-**Moving to a different host** is the same five steps, just starting cold:
+**Moving to a different host** is the same flow: create an empty project
-bring the compose files and the correct pinned image tag to the new host
+directory, unpack the backup there, edit `.env` (and `docker-compose.yml` if
-(step 1 of [Full deployment](#full-deployment)), put the backup archive in
+needed) for the new hostname or proxy, then `docker compose up -d`. The archive
-place of step 3 above, then redo the reverse-proxy/TLS and DNS steps of a
+carries `certs/` from the old host — re-issue certificates when the hostname or
-[Full deployment](#full-deployment) — the PTR record and the certificate both
+IP changes. Set up the reverse-proxy vhost separately (not in the backup).
-belong to the old IP/host and have to be reissued for the new one; nothing in
-the backup carries them.
 
 **Restoring an encrypted (`.spbk`) backup** needs a running container to
 decrypt it first — any container with the `selfpost-backup` CLI works; decryption
 does not read `/data` and performs no version check. Start one normally
-(step 5, but on an empty `/data` you haven't unpacked yet), then:
+(step 5, but on an empty project you have not unpacked yet), then:
 
 ```sh
 docker exec -i <container> selfpost-backup -decrypt < backup.spbk > selfpost-backup.tar.gz
 ```
 
-Stop it, wipe `/data` again, and continue from step 2 above with the
+Stop it, wipe the project directory again, and continue from step 2 above with
-resulting `.tar.gz` — see [Encrypting a backup or
+the resulting `.tar.gz` — see [Encrypting a backup or
 export](#encrypting-a-backup-or-export) for the decrypt command's password
 options.
 
+**Archives from older SelfPost versions** (flat layout: `manifest.json` and
+`selfpost.db` at the archive root, no `data/` prefix, no deploy files) restore
+with the previous procedure: `tar xzf backup.tar.gz -C ./data` into a project
+that already has `docker-compose.yml` and `.env`.
+
 Restoring an archive taken **before** a session row was removed can bring
 that session back: session rows travel with the backup, and a browser that
 still holds the matching cookie is signed in again on the next request if the
@@ -520,9 +529,9 @@ domain](#exporting-and-importing-a-single-domain) — a different, domain-scoped
 operation that also lives on the *Backup* page (`/backup`).
 
 Both a full backup and a domain export are **secrets** — they contain the
-admin password hash (full backup) or working application credentials (domain
+admin password hash (full backup), TLS private keys and `.env` (full backup),
-export) in the clear or in directly reversible form. Treat them like any
+or working application credentials (domain export) in the clear or in
-other credential material: restrict who can read them, don't email them
+directly reversible form. Treat them like any other credential material: restrict who can read them, don't email them
 around — and encrypt them, which SelfPost can do for you.
 
 #### Encrypting a backup or export

docs/plans/domain-stats-auto-ratelimit.md

@@ -0,0 +1,187 @@
+# Plan: domain-stats-auto-ratelimit
+
+**Status:** candidate  
+**Date:** 2026-08-17  
+**Version:** `1.x` MINOR; migrations must stay compatible with `1.0.0`.
+
+---
+
+## Goal
+
+Give the operator **30-day sending statistics** per domain and per application
+(total volume, peak and average rate), and an optional **auto** level-2 rate
+limit that sets `max_messages` from the average rate (avg × multiplier) over the
+level-1 window.
+
+## Scope
+
+**In:**
+
+- Rolling **30-day** stats on each domain page (domain aggregate + per-app rows):
+  message count, peak msg/h, average msg/h.
+- Level-2 rate limit mode **manual** (today) or **auto** for domain and
+  application scopes.
+- Auto formula: `max_messages = ceil(avg_hourly × multiplier)`, window =
+  level-1 window (`RATE_LIMIT_WINDOW_SECONDS`); capped at level 1.
+- Background recalculation (e.g. every 6 h, alongside send-log prune); milter
+  reads stored `max_messages` / `window_seconds` only (no aggregates on the
+  hot path).
+- Panel UI: stats card, manual/auto toggle, multiplier field, read-only computed
+  limit in auto mode, optional «Recalculate now».
+- RBAC: domain-admin sees stats and may configure auto/manual for assigned
+  domains only; same authz as existing rate-limit handlers.
+- Tests, [guide.md](../guide.md), [CHANGELOG.md](../../CHANGELOG.md); security
+  review (Fable) for rate-limit path changes.
+
+**Out:**
+
+- Changing level 1 (Postfix env) — auto only fills level 2 under the L1 cap.
+- Automated IP warmup schedules ([guide.md](../guide.md) § IP warmup stays
+  operator-driven).
+- Prometheus/Grafana, alerting, APIs.
+- Counting level-1 refusals or `rejected` rows as sent volume.
+- Per-client-IP analytics.
+
+## Data source
+
+All metrics come from SQLite `send_log`, same rules as
+[`CountMessages`](../../internal/store/ratelimits.go):
+
+- One message = one distinct `queue_id` (many recipients = one count).
+- `status != rejected` (level-2 refusals never queued).
+- Level-1 refusals are **not** in `send_log` — stats under-count refusals;
+  document in UI copy.
+
+Retention today is env `SEND_LOG_RETENTION_DAYS` (default 90). Stats use the
+last **30 days** of rows still present. If retention < 30 days (after
+[send-log-retention](send-log-retention.md)), the stats window is
+`min(30, retention)` with a warning.
+
+### Metrics
+
+| Metric | Definition |
+|---|---|
+| **total** | `COUNT(DISTINCT queue_id)` in the stats window |
+| **peak rate** | maximum messages in any **hourly** bucket in that window (msg/h) |
+| **avg rate** | `total / hours_in_window`, where `hours_in_window = min(720, age of domain/app in hours, retention hours)` |
+
+Keys: `send_log.domain` (domain scope), `send_log.app_login` (application scope).
+
+## Architecture
+
+```mermaid
+flowchart LR
+  milter["journal-milter"] --> sendLog["send_log"]
+  sendLog --> statsQuery["StatsQuery 30d"]
+  statsQuery --> domainPage["domain page stats card"]
+  statsQuery --> autoJob["auto recalc job"]
+  autoJob --> rateLimits["rate_limits"]
+  rateLimits --> milter
+```
+
+1. **[`internal/store/stats.go`](../../internal/store/stats.go)** — `SendStats`
+   with `Total`, `PeakPerHour`, `AvgPerHour`; `DomainSendStats(name, since)` /
+   `AppSendStats(login, since)`.
+2. Hourly buckets: `strftime('%Y-%m-%d %H', created_at)` + `GROUP BY`; subquery
+   for peak; total via distinct `queue_id`.
+3. Indexes `idx_send_log_domain` and `idx_send_log_created_at` exist; add
+   composite `(domain, created_at)` only if profiling shows need.
+4. **Auto recalc** — panel goroutine (same interval as send-log prune): for each
+   `rate_limits` row with `mode = auto`, recompute `max_messages`, set
+   `auto_updated_at`. Milter unchanged except reading new columns via existing
+   `RateLimit` lookup.
+
+### Auto rate limit
+
+Extend [`RateLimit`](../../internal/store/ratelimits.go):
+
+```go
+type RateLimit struct {
+    // existing: Scope, RefID, AllowedIPs, MaxMessages, WindowSeconds
+    Mode           string  // "manual" | "auto"
+    AutoMultiplier float64 // default 2.5 when Mode == "auto"
+    AutoUpdatedAt  time.Time
+}
+```
+
+**Formula:**
+
+```
+avg_hourly = total_messages_in_window / hours_in_window
+max_messages = ceil(avg_hourly * auto_multiplier)
+window_seconds = L1 window (not editable in auto mode)
+max_messages = min(max_messages, L1 max)
+```
+
+When `total == 0`: auto limit stays **inactive** (same as empty manual limit);
+UI explains that traffic is required before auto can apply.
+
+**Application overrides** ([`handlers_ratelimit.go`](../../internal/web/handlers/handlers_ratelimit.go)):
+
+- Trusted IPs required.
+- Auto app ceiling **strictly above** domain limit when domain limit is active.
+- Ceiling ≤ L1.
+
+**Fail-open:** store errors during recalc must not weaken enforcement of the
+last successfully written limit; recalc failures are logged only.
+
+### Migration (`0006_rate_limit_auto.sql`)
+
+```sql
+ALTER TABLE rate_limits ADD COLUMN mode TEXT NOT NULL DEFAULT 'manual'
+  CHECK (mode IN ('manual', 'auto'));
+ALTER TABLE rate_limits ADD COLUMN auto_multiplier REAL;
+ALTER TABLE rate_limits ADD COLUMN auto_updated_at TEXT;
+```
+
+Existing rows → `manual`.
+
+### Domain export
+
+Today rate limits are **not** exported. This plan adds them (including
+`mode`, `auto_multiplier`) to domain transfer JSON — document as a boundary
+change in [guide.md](../guide.md) § Export.
+
+## Panel UI
+
+- Domain page ([`domain_detail.html`](../../internal/web/view/templates/domain_detail.html)):
+  - **Sending statistics (30 days)** — total, peak msg/h, avg msg/h.
+  - Per-application stats in the app list.
+  - Rate limit: Manual / Auto, multiplier (e.g. 1.5–5.0, default 2.5), read-only
+    computed max/window in auto mode, «Recalculate now».
+- Optional later: «30d» column on domain list (global admin only).
+
+## Tests
+
+- `internal/store/stats_test.go` — fixtures → total / peak / avg.
+- `internal/store/ratelimits_test.go` — auto recalc, L1 cap, app > domain.
+- Handler tests — auto form validation, multiplier bounds.
+- Milter tests — enforced limit matches last recalculated values.
+
+`go test` / `go vet` on touched packages.
+
+## Done when
+
+- Domain and app 30-day stats visible on the domain page; domain-admin scoping
+  enforced.
+- Manual/auto toggle works for domain and app; auto recalc updates `rate_limits`
+  and milter enforces stored ceilings.
+- Zero-traffic auto stays inactive with clear UI copy.
+- [guide.md](../guide.md) and [CHANGELOG.md](../../CHANGELOG.md) updated;
+  security review passed.
+
+## Risks
+
+- Heavy aggregation on large `send_log` tables — mitigate with indexes or
+  nightly rollups (phase 2).
+- Stats without level-1 visibility — mitigate with operator-facing caveat.
+- Auto limit too tight after a spike — multiplier is operator-tuned; show peak
+  alongside avg in auto UI.
+
+## Dependencies
+
+- [`send-log-retention`](send-log-retention.md) is a separate roadmap item but
+  should land before or in parallel so operators can set retention ≥ 30 days
+  from the panel.
+
+**Version:** `1.x` MINOR.

docs/plans/send-log-retention.md

@@ -0,0 +1,124 @@
+# Plan: send-log-retention
+
+**Status:** candidate  
+**Date:** 2026-08-17  
+**Version:** `1.x` MINOR; no schema migration required (uses existing `settings` table).
+
+---
+
+## Goal
+
+Let the **global administrator** change how long delivery journal rows
+(`send_log`, `/deliveries`) are kept, from the panel — without editing `.env`.
+
+## Context (as-built)
+
+Retention **already exists**, but only via environment:
+
+- `SEND_LOG_RETENTION_DAYS` (default **90**) in `.env` / Compose.
+- [`cmd/panel/main.go`](../../cmd/panel/main.go) passes it to
+  [`logtail.Run`](../../internal/logtail/logtail.go).
+- [`retentionLoop`](../../internal/logtail/logtail.go) prunes via
+  [`DeleteSendLogBefore`](../../internal/store/sendlog.go) every **6 hours**.
+- No panel control; [`handlers_monitor.go`](../../internal/web/handlers/handlers_monitor.go)
+  hardcodes «ninety days» in copy.
+- Migration `0001_init.sql` describes `settings` as the place for «retention
+  overrides», but no UI writes that key yet.
+
+This plan moves the **effective** retention into SQLite `settings`, with env as
+bootstrap only.
+
+## Scope
+
+**In:**
+
+- Settings card on `/settings` (global administrator only): **Send log
+  retention (days)**.
+- Key `send_log_retention_days` in [`settings`](../../internal/store/settings.go).
+- Validation: integer range **7–365** (exact bounds fixed at implementation).
+- On first use: if setting missing, seed from env
+  (`SEND_LOG_RETENTION_DAYS`, default 90) at panel start or first save.
+- Log-tailer reads the setting **each prune cycle** (no container restart).
+- Delivery pages and guide copy show the **current** retention, not a hardcoded
+  90.
+- Tests; [guide.md](../guide.md); [CHANGELOG.md](../../CHANGELOG.md).
+
+**Out:**
+
+- Per-domain retention (instance-wide only).
+- `mail.log` rotation (logrotate, 14 daily files — unchanged).
+- Immediate prune on save when lowering retention (next 6 h cycle is enough;
+  optional «Prune now» not in v1).
+- Domain-admin access to this setting.
+
+## Architecture
+
+```mermaid
+flowchart LR
+  settingsPage["/settings form"] --> sqlite["settings.send_log_retention_days"]
+  env["SEND_LOG_RETENTION_DAYS bootstrap"] --> sqlite
+  sqlite --> retentionLoop["logtail retentionLoop"]
+  retentionLoop --> prune["DeleteSendLogBefore"]
+```
+
+1. **Read path** — `GetSendLogRetentionDays()`: settings value if valid, else env
+   default.
+2. **Write path** — POST `/settings` (global admin): validate, `SetSetting`,
+   flash confirmation.
+3. **Prune path** — change [`logtail.retentionLoop`](../../internal/logtail/logtail.go)
+   to accept `func() int` or `RetentionReader` that queries settings each cycle
+   (same 6 h ticker).
+4. **Copy** — inject retention days into delivery list/detail templates and
+   remove hardcoded «ninety days».
+
+`SEND_LOG_RETENTION_DAYS` remains documented in [guide.md](../guide.md) as the
+**initial default** until changed in Settings.
+
+## Relation to domain-stats-auto-ratelimit
+
+[domain-stats-auto-ratelimit](domain-stats-auto-ratelimit.md) uses a **30-day**
+stats window. Requires effective retention ≥ 30 for full accuracy. When
+retention < 30:
+
+- Stats UI shows a warning and uses `min(30, retention)` as the window, or
+- Settings validation warns when saving a value below 30 while stats/auto are
+  enabled (pick one at implementation; document in guide).
+
+Recommended roadmap order: **send-log-retention** before or parallel with
+domain-stats-auto-ratelimit.
+
+## Panel UI
+
+New card on [`settings.html`](../../internal/web/view/templates/settings.html)
+(global admin block, near rate limits or under a «Deliveries» heading):
+
+- Number input: retention days (7–365).
+- Muted copy: rows older than this are deleted from `/deliveries`; main driver
+  of `/data` growth; does not affect `mail.log` rotation.
+
+Domain administrators keep the narrow credentials-only settings page.
+
+## Tests
+
+- Save/load setting; reject out-of-range values.
+- `retentionLoop` uses updated value without process restart (mock reader).
+- Bootstrap: empty settings → env default used for prune.
+- Template/delivery copy reflects configured days.
+
+`go test` / `go vet` on touched packages.
+
+## Done when
+
+- Global admin can set retention on `/settings`; value persists in SQLite.
+- Prune uses the panel value on the next cycle; env remains bootstrap default.
+- Guide documents panel vs env; CHANGELOG entry added.
+- Hardcoded «ninety days» removed from delivery UI.
+
+## Risks
+
+- Operator lowers retention while bookmarking old delivery URLs — existing
+  behaviour; copy already notes pruned rows are gone.
+- Settings change without restart — must be tested so log-tailer never keeps a
+  stale int from panel start only.
+
+**Version:** `1.x` MINOR.

docs/product.md

@@ -59,7 +59,9 @@ domain administrators with assigned domains). The optional **inbound relay** is
 the main agreed **1.x+** extension still on the
 [roadmap](roadmap.md) — it targets a 1.x MINOR bump by default; a 2.x major
 remains possible pending implementation. Items marked *candidate* in the
-roadmap require explicit approval before coding.
+roadmap require explicit approval before coding (including **send-log retention
+in Settings**, **30-day send statistics**, and **auto level-2 rate limits** —
+see linked plans there).
 
 ---
 

docs/roadmap.md

@@ -30,6 +30,8 @@ in `git log` and [CHANGELOG.md](../CHANGELOG.md).
 |---|---|---|---|
 | queue-retries | Postfix retry policy in the panel (queue lifetime, backoff) | **agreed** | [plans/queue-retries.md](plans/queue-retries.md) |
 | inbound-relay | Inbound relay (backup-MX / forwarding) | **agreed** | [plans/inbound-relay.md](plans/inbound-relay.md) |
+| send-log-retention | Send-log retention days in panel Settings | candidate | [plans/send-log-retention.md](plans/send-log-retention.md) |
+| domain-stats-auto-ratelimit | 30-day send stats + auto level-2 rate limit | candidate | [plans/domain-stats-auto-ratelimit.md](plans/domain-stats-auto-ratelimit.md) |
 | contributing | `CONTRIBUTING.md` | candidate | — |
 | dmarc-reports | DMARC aggregate report ingestion and panel UI | candidate | [plans/dmarc-reports.md](plans/dmarc-reports.md) |
 | panel-docs | In-panel operator documentation | candidate | — |
@@ -37,7 +39,9 @@ in `git log` and [CHANGELOG.md](../CHANGELOG.md).
 
 **Recommended order** (not binding): **queue-retries** is a small panel item
 that can land first or in parallel; the next feature is **inbound-relay**.
-The 2026-08-13 full-tree review follow-ups (send-log authorization,
+**send-log-retention** can land before or beside **domain-stats-auto-ratelimit**
+(panel retention ≥ 30 days helps the stats window). The 2026-08-13 full-tree
+review follow-ups (send-log authorization,
 fail-closed paths, docs, GUI, tests, licence) are closed — history in
 [CHANGELOG.md](../CHANGELOG.md) `[Unreleased]` and git. Candidates need
 explicit agreement before they join the queue.
@@ -89,6 +93,44 @@ implementation lands.
 
 ---
 
+## send-log-retention
+
+**Goal:** global administrator sets how many days of delivery journal rows
+(`send_log`, `/deliveries`) are kept, from `/settings` — stored in SQLite
+`settings`, with `SEND_LOG_RETENTION_DAYS` as bootstrap default only.
+
+**Boundary:** instance-wide retention; not per-domain. Does not change
+`mail.log` rotation. Today retention is env-only (default 90 days); the panel
+has no control.
+
+**Done when:** see [plans/send-log-retention.md](plans/send-log-retention.md).
+
+**Dependencies / risks:** log-tailer must re-read settings each prune cycle;
+delivery UI must stop hardcoding «ninety days».
+**Version:** `1.x` MINOR; `candidate` until explicitly agreed.
+
+---
+
+## domain-stats-auto-ratelimit
+
+**Goal:** 30-day sending statistics per domain and application (total, peak and
+average msg/h) on the domain page, plus optional **auto** level-2 rate limits
+computed as `ceil(avg_hourly × multiplier)` over the level-1 window.
+
+**Boundary:** extension of v1.0 manual L2 limits; does not change Postfix
+level 1. Stats exclude level-1 refusals (not in send log). Auto with zero
+traffic stays inactive.
+
+**Done when:** see
+[plans/domain-stats-auto-ratelimit.md](plans/domain-stats-auto-ratelimit.md).
+
+**Dependencies / risks:** send log data and preferably
+[send-log-retention](#send-log-retention) ≥ 30 days; aggregate query cost on
+large logs; rate-limit path needs security review.
+**Version:** `1.x` MINOR; `candidate` until explicitly agreed.
+
+---
+
 ## contributing
 
 **Goal:** `CONTRIBUTING.md` in the root — the dev loop, the checks to run

docs/security.md

@@ -86,10 +86,11 @@ The panel is exposed to the internet — the items below are **not optional**.
 
 ### Backup and domain export
 
-- Both files are secrets: a full backup carries DKIM keys, `sasldb2`, and the
+- Both files are secrets: a full backup carries DKIM keys, `sasldb2`, the
-  administrator's password hash; a domain export carries the DKIM key and
+  administrator's password hash, `docker-compose.yml`, `.env`, and the TLS
-  **working** application passwords in the clear (otherwise a transfer without
+  private key from `certs/` when present; a domain export carries the DKIM key
-  recreating credentials would be impossible).
+  and **working** application passwords in the clear (otherwise a transfer
+  without recreating credentials would be impossible).
 - Both downloads can be encrypted with a password (a checkbox on the form):
   scrypt (N=2¹⁵, r=8, p=1) → AES-256-GCM, streamed in 64 KiB chunks, each
   authenticated with the header, the chunk number, and an end-of-stream flag —

internal/backup/backup.go

@@ -1,15 +1,17 @@
 // Package backup implements SelfPost's full-server backup and the restore
 // version guard (architecture.md § Persistence). A full backup is a
 // gzip-compressed tar of the consolidated persistent state under /data — the
-// SQLite database (as a consistent snapshot), the per-domain DKIM keys and the
+// SQLite database (as a consistent snapshot), the per-domain DKIM keys, the
-// SASL database — plus a manifest recording the SelfPost version that produced
+// SASL database, and the Postfix queue — plus docker-compose.yml, .env, and
-// it. TLS certificates (the reverse proxy's responsibility) and the Postfix
+// certs/ from the operator's deploy directory, and a manifest recording the
-// queue are deliberately excluded (architecture.md § Persistence).
+// SelfPost version that produced it. Postfix delivery logs under log/ are
+// excluded (diagnostics, not state).
 //
 // Restore is not a separate code path in the panel: a backup is extracted into
-// the /data bind mount before first start, and the archive already carries
+// the operator's project directory (data/, docker-compose.yml, .env, certs/)
-// everything the mail path needs — DKIM keys, sasldb2, and Postfix's sender
+// before first start. The archive carries everything needed to bring the
-// map — so the daemons can start on the extracted files alone. The
+// instance back — DKIM keys, sasldb2, sender map, queue, and deploy files —
+// so the operator only adjusts hostname or proxy settings on a new host. The
 // restore-specific steps the panel runs are CheckRestore, which refuses to
 // boot if the manifest's version does not match the running binary so
 // schema/format skew between versions cannot silently corrupt state
@@ -40,11 +42,21 @@ import (
 // FormatFull identifies a full-server backup manifest.
 const FormatFull = "selfpost-full-backup"
 
-// ManifestName is the manifest's filename, both inside the archive and, after a
+// ManifestName is the manifest's filename inside the data directory. After
-// restore extraction, at the root of the data directory where CheckRestore
+// restore extraction it lives at data/manifest.json under the project root;
-// looks for it.
+// CheckRestore reads it from the /data bind mount.
 const ManifestName = "manifest.json"
 
+// DataArchivePrefix is the path prefix for every /data entry in the archive.
+const DataArchivePrefix = "data/"
+
+// ComposeFileName and EnvFileName are required deploy files at the archive root.
+const (
+	ComposeFileName = "docker-compose.yml"
+	EnvFileName     = ".env"
+	CertsDirName    = "certs"
+)
+
 // Manifest is the small JSON document embedded in every backup archive. Its
 // Version is the single fact that makes restore safe: the panel refuses to
 // boot a data directory whose manifest version does not match its own binary
@@ -58,21 +70,23 @@ type Manifest struct {
 // Params configures a backup. DataDir is the consolidated state root (/data);
 // DBPath is the live SQLite file within it, snapshotted consistently rather than
 // copied byte-for-byte while it may be mid-write; Version is stamped into the
-// manifest.
+// manifest; DeployRoot is the host project directory mounted read-only (holds
+// docker-compose.yml, .env, and optionally certs/). OnWarn is called for
+// non-fatal issues such as a missing certs/ directory.
 type Params struct {
-	DataDir string
+	DataDir    string
-	DBPath  string
+	DBPath     string
-	Version string
+	Version    string
+	DeployRoot string
+	OnWarn     func(string)
 }
 
 // excludedFromArchive lists the data-directory entries a backup never carries.
 // The live database files are replaced by a consistent VACUUM INTO snapshot
 // written under the canonical name; the setup token is transient bootstrap
 // state; a stale manifest from a previous restore must not be re-captured (a
-// fresh one is written instead); a "tls" directory holds the reverse proxy's
+// fresh one is written instead); a "tls" directory under /data is skipped when
-// certificates, which are explicitly out of scope for a SelfPost backup
+// an operator pointed TLS_CERT_FILE inside /data; and "log" is Postfix's raw
-// (architecture.md § Persistence) — excluding it keeps that guarantee even when
-// an operator points TLS_CERT_FILE inside /data; and "log" is Postfix's raw
 // delivery log plus its fourteen rotated files, which is diagnostic output, not
 // state to restore, and by far the largest thing under /data.
 var excludedFromArchive = map[string]bool{
@@ -86,16 +100,22 @@ var excludedFromArchive = map[string]bool{
 	ManifestName:          true,
 }
 
-// Create writes a gzip-compressed tar backup to w. Archive entries are named
+// Create writes a gzip-compressed tar backup to w. Archive layout:
-// relative to DataDir, so extracting the archive into the /data bind mount
+//
-// reconstructs the state in place (architecture.md § Persistence). The SQLite
+//	data/manifest.json, data/selfpost.db, data/<rest of /data>
-// database is added as a consistent snapshot under "selfpost.db"; everything
+//	docker-compose.yml, .env, certs/...
-// else under DataDir is copied as-is except the entries in
+//
-// excludedFromArchive.
+// Extract the archive into an empty project directory, then docker compose up.
 func Create(w io.Writer, p Params) error {
 	if p.DataDir == "" || p.DBPath == "" {
 		return fmt.Errorf("backup: DataDir and DBPath are required")
 	}
+	if p.DeployRoot == "" {
+		return fmt.Errorf("backup: DeployRoot is required (mount the project directory at SELFPOST_DEPLOY_ROOT)")
+	}
+	if err := validateDeployRoot(p.DeployRoot); err != nil {
+		return err
+	}
 
 	snapshot, cleanup, err := snapshotDB(p.DBPath)
 	if err != nil {
@@ -115,17 +135,21 @@ func Create(w io.Writer, p Params) error {
 	if err != nil {
 		return fmt.Errorf("backup: encode manifest: %w", err)
 	}
-	if err := writeTarBytes(tw, ManifestName, 0o600, manifestJSON); err != nil {
+	if err := writeTarBytes(tw, DataArchivePrefix+ManifestName, 0o600, manifestJSON); err != nil {
 		return err
 	}
 
 	// The consistent SQLite snapshot, under the canonical filename the panel
 	// opens on start (the live file and its WAL/SHM are excluded from the walk).
-	if err := writeTarFile(tw, "selfpost.db", 0o640, snapshot); err != nil {
+	if err := writeTarFile(tw, DataArchivePrefix+"selfpost.db", 0o640, snapshot); err != nil {
 		return err
 	}
 
-	if err := addTree(tw, p.DataDir); err != nil {
+	if err := addTree(tw, p.DataDir, DataArchivePrefix, excludedFromArchive); err != nil {
+		return err
+	}
+
+	if err := addDeployFiles(tw, p.DeployRoot, p.OnWarn); err != nil {
 		return err
 	}
 
@@ -138,33 +162,79 @@ func Create(w io.Writer, p Params) error {
 	return nil
 }
 
-// addTree walks dataDir and adds every regular file (and directory, to preserve
+// ValidateDeployRoot checks that the operator project directory is mounted and
-// empty ones and modes) to tw under its path relative to dataDir, skipping the
+// contains the files a full backup requires. Call before streaming a response.
-// excluded entries. Non-regular, non-directory entries (symlinks, sockets) are
+func ValidateDeployRoot(deployRoot string) error {
-// skipped: /data holds none in normal operation, and copying them into a backup
+	if deployRoot == "" {
-// would be meaningless or unsafe.
+		return fmt.Errorf("backup: DeployRoot is required (mount the project directory at SELFPOST_DEPLOY_ROOT)")
-func addTree(tw *tar.Writer, dataDir string) error {
+	}
-	return filepath.WalkDir(dataDir, func(path string, d fs.DirEntry, err error) error {
+	return validateDeployRoot(deployRoot)
+}
+
+func validateDeployRoot(deployRoot string) error {
+	for _, name := range []string{ComposeFileName, EnvFileName} {
+		path := filepath.Join(deployRoot, name)
+		if _, err := os.Stat(path); err != nil {
+			return fmt.Errorf("backup: deploy root %q is missing %s: %w", deployRoot, name, err)
+		}
+	}
+	return nil
+}
+
+func addDeployFiles(tw *tar.Writer, deployRoot string, onWarn func(string)) error {
+	for _, name := range []string{ComposeFileName, EnvFileName} {
+		src := filepath.Join(deployRoot, name)
+		info, err := os.Stat(src)
+		if err != nil {
+			return fmt.Errorf("backup: stat deploy file %s: %w", name, err)
+		}
+		if !info.Mode().IsRegular() {
+			return fmt.Errorf("backup: deploy file %s is not a regular file", name)
+		}
+		if err := writeTarFile(tw, name, info.Mode().Perm(), src); err != nil {
+			return err
+		}
+	}
+
+	certsDir := filepath.Join(deployRoot, CertsDirName)
+	if _, err := os.Stat(certsDir); err != nil {
+		if os.IsNotExist(err) {
+			if onWarn != nil {
+				onWarn("certs/ not found in deploy root; backup will not include TLS material")
+			}
+			return nil
+		}
+		return fmt.Errorf("backup: stat %s: %w", CertsDirName, err)
+	}
+	return addTree(tw, certsDir, CertsDirName+"/", nil)
+}
+
+// addTree walks root and adds every regular file (and directory, to preserve
+// empty ones and modes) to tw under archivePrefix + path relative to root.
+// When exclude is non-nil, top-level names relative to root are skipped.
+// Non-regular, non-directory entries (symlinks, sockets) are skipped.
+func addTree(tw *tar.Writer, root, archivePrefix string, exclude map[string]bool) error {
+	return filepath.WalkDir(root, func(path string, d fs.DirEntry, err error) error {
 		if err != nil {
 			return err
 		}
-		rel, err := filepath.Rel(dataDir, path)
+		rel, err := filepath.Rel(root, path)
 		if err != nil {
 			return err
 		}
 		if rel == "." {
-			return nil // the data root itself is implicit
-		}
-		// filepath.Rel yields OS separators; tar names use forward slashes.
-		name := filepath.ToSlash(rel)
-		// Exclude by top-level name (the live DB, setup token and stale manifest
-		// all live at the data root).
-		if excludedFromArchive[name] {
-			if d.IsDir() {
-				return fs.SkipDir
-			}
 			return nil
 		}
+		name := archivePrefix + filepath.ToSlash(rel)
+		if exclude != nil {
+			top := strings.Split(filepath.ToSlash(rel), "/")[0]
+			if exclude[top] {
+				if d.IsDir() {
+					return fs.SkipDir
+				}
+				return nil
+			}
+		}
 
 		info, err := d.Info()
 		if err != nil {
@@ -182,7 +252,7 @@ func addTree(tw *tar.Writer, dataDir string) error {
 		case info.Mode().IsRegular():
 			return writeTarFile(tw, name, info.Mode().Perm(), path)
 		default:
-			return nil // skip symlinks/sockets/devices
+			return nil
 		}
 	})
 }

internal/backup/backup_test.go

@@ -15,10 +15,15 @@ import (
 )
 
 // seedDataDir builds a realistic /data tree: a migrated SQLite database plus the
-// DKIM key, SASL and transient files a backup must include or exclude.
+// DKIM key, SASL and transient files a backup must include or exclude. It also
-func seedDataDir(t *testing.T) (dataDir, dbPath string) {
+// seeds a deploy root beside data/ with compose, .env, and certs/.
+func seedDataDir(t *testing.T) (dataDir, dbPath, deployRoot string) {
 	t.Helper()
-	dataDir = t.TempDir()
+	deployRoot = t.TempDir()
+	dataDir = filepath.Join(deployRoot, "data")
+	if err := os.MkdirAll(dataDir, 0o750); err != nil {
+		t.Fatalf("mkdir data: %v", err)
+	}
 	dbPath = filepath.Join(dataDir, "selfpost.db")
 
 	st, err := store.Open(dbPath)
@@ -35,6 +40,7 @@ func seedDataDir(t *testing.T) (dataDir, dbPath string) {
 	writeFile(t, filepath.Join(dataDir, "opendkim", "keys", "example.com", "selfpost.private"), "PRIVATE KEY")
 	writeFile(t, filepath.Join(dataDir, "sasl", "sasldb2"), "SASLDB")
 	writeFile(t, filepath.Join(dataDir, "postfix", "sender_login_maps"), "@example.com login")
+	writeFile(t, filepath.Join(dataDir, "postfix", "queue", "deferred", "sample"), "queue-file")
 	// Transient files that must NOT be archived.
 	writeFile(t, filepath.Join(dataDir, "setup-token"), "secret-token")
 	writeFile(t, filepath.Join(dataDir, "selfpost.db-wal"), "wal")
@@ -43,7 +49,11 @@ func seedDataDir(t *testing.T) (dataDir, dbPath string) {
 	// state, and the bulkiest thing under /data.
 	writeFile(t, filepath.Join(dataDir, "log", "mail.log"), "Aug  8 07:26:41 mail postfix/smtp[1]: ABC: to=<a@example.net>, status=sent (ok)")
 	writeFile(t, filepath.Join(dataDir, "log", "mail.log.1"), "older")
-	return dataDir, dbPath
+	writeFile(t, filepath.Join(deployRoot, ComposeFileName), "services:\n  selfpost:\n    image: test\n")
+	writeFile(t, filepath.Join(deployRoot, EnvFileName), "SELFPOST_HOSTNAME=mail.example.com\n")
+	writeFile(t, filepath.Join(deployRoot, CertsDirName, "fullchain.pem"), "CERT")
+	writeFile(t, filepath.Join(deployRoot, CertsDirName, "privkey.pem"), "KEY")
+	return dataDir, dbPath, deployRoot
 }
 
 func writeFile(t *testing.T, path, content string) {
@@ -87,21 +97,26 @@ func readArchive(t *testing.T, data []byte) map[string]string {
 }
 
 func TestCreateIncludesStateExcludesTransient(t *testing.T) {
-	dataDir, dbPath := seedDataDir(t)
+	dataDir, dbPath, deployRoot := seedDataDir(t)
 
 	var buf bytes.Buffer
-	if err := Create(&buf, Params{DataDir: dataDir, DBPath: dbPath, Version: "1.2.3"}); err != nil {
+	if err := Create(&buf, Params{DataDir: dataDir, DBPath: dbPath, Version: "1.2.3", DeployRoot: deployRoot}); err != nil {
 		t.Fatalf("Create: %v", err)
 	}
 	files := readArchive(t, buf.Bytes())
 
 	// Present.
 	for _, name := range []string{
-		ManifestName,
+		DataArchivePrefix + ManifestName,
-		"selfpost.db",
+		DataArchivePrefix + "selfpost.db",
-		"opendkim/keys/example.com/selfpost.private",
+		DataArchivePrefix + "opendkim/keys/example.com/selfpost.private",
-		"sasl/sasldb2",
+		DataArchivePrefix + "sasl/sasldb2",
-		"postfix/sender_login_maps",
+		DataArchivePrefix + "postfix/sender_login_maps",
+		DataArchivePrefix + "postfix/queue/deferred/sample",
+		ComposeFileName,
+		EnvFileName,
+		CertsDirName + "/fullchain.pem",
+		CertsDirName + "/privkey.pem",
 	} {
 		if _, ok := files[name]; !ok {
 			t.Errorf("archive missing %s", name)
@@ -109,8 +124,11 @@ func TestCreateIncludesStateExcludesTransient(t *testing.T) {
 	}
 	// Excluded.
 	for _, name := range []string{
-		"setup-token", "selfpost.db-wal", "selfpost.db-shm",
+		DataArchivePrefix + "setup-token",
-		"log/mail.log", "log/mail.log.1",
+		DataArchivePrefix + "selfpost.db-wal",
+		DataArchivePrefix + "selfpost.db-shm",
+		DataArchivePrefix + "log/mail.log",
+		DataArchivePrefix + "log/mail.log.1",
 	} {
 		if _, ok := files[name]; ok {
 			t.Errorf("archive should not contain %s", name)
@@ -119,7 +137,7 @@ func TestCreateIncludesStateExcludesTransient(t *testing.T) {
 
 	// Manifest is well-formed and carries the version.
 	var m Manifest
-	if err := json.Unmarshal([]byte(files[ManifestName]), &m); err != nil {
+	if err := json.Unmarshal([]byte(files[DataArchivePrefix+ManifestName]), &m); err != nil {
 		t.Fatalf("manifest json: %v", err)
 	}
 	if m.Format != FormatFull || m.Version != "1.2.3" {
@@ -128,7 +146,7 @@ func TestCreateIncludesStateExcludesTransient(t *testing.T) {
 
 	// The archived selfpost.db is a real, openable SQLite snapshot with our data.
 	snapPath := filepath.Join(t.TempDir(), "restored.db")
-	if err := os.WriteFile(snapPath, []byte(files["selfpost.db"]), 0o640); err != nil {
+	if err := os.WriteFile(snapPath, []byte(files[DataArchivePrefix+"selfpost.db"]), 0o640); err != nil {
 		t.Fatalf("write snapshot: %v", err)
 	}
 	st, err := store.Open(snapPath)
@@ -145,6 +163,14 @@ func TestCreateIncludesStateExcludesTransient(t *testing.T) {
 	}
 }
 
+func TestCreateRequiresDeployRoot(t *testing.T) {
+	dataDir, dbPath, _ := seedDataDir(t)
+	var buf bytes.Buffer
+	if err := Create(&buf, Params{DataDir: dataDir, DBPath: dbPath, Version: "1.0.0"}); err == nil {
+		t.Fatal("Create without DeployRoot succeeded")
+	}
+}
+
 func writeManifest(t *testing.T, dir, format, version string) string {
 	t.Helper()
 	path := filepath.Join(dir, ManifestName)

internal/web/handlers/handlers.go

@@ -20,6 +20,7 @@ type Config struct {
 	MailLogPath       string
 	DataDir           string
 	DBPath            string
+	DeployRoot        string
 	Version           string
 	TLSCertFile       string
 	OpenDKIMSocket    string

internal/web/handlers/handlers_backup.go

@@ -7,6 +7,7 @@ import (
 	"fmt"
 	"io"
 	"net/http"
+	"strings"
 	"time"
 
 	"github.com/mixeme/selfpost/internal/backup"
@@ -70,6 +71,11 @@ func (h *Handlers) HandleBackup(w http.ResponseWriter, r *http.Request) {
 		h.renderBackupPageWith(w, r, http.StatusBadRequest, "", pwErr)
 		return
 	}
+	if err := backup.ValidateDeployRoot(h.cfg.DeployRoot); err != nil {
+		logf("panel: full backup: %v", err)
+		h.renderBackupPageWith(w, r, http.StatusBadRequest, "", deployBackupErr(err))
+		return
+	}
 
 	stamp := time.Now().UTC().Format("20060102-150405")
 	filename := fmt.Sprintf("selfpost-backup-%s.tar.gz", stamp)
@@ -105,9 +111,13 @@ func (h *Handlers) HandleBackup(w http.ResponseWriter, r *http.Request) {
 	}
 
 	if err := backup.Create(sink, backup.Params{
-		DataDir: h.cfg.DataDir,
+		DataDir:    h.cfg.DataDir,
-		DBPath:  h.cfg.DBPath,
+		DBPath:     h.cfg.DBPath,
-		Version: h.cfg.Version,
+		Version:    h.cfg.Version,
+		DeployRoot: h.cfg.DeployRoot,
+		OnWarn: func(msg string) {
+			logf("panel: full backup: %s", msg)
+		},
 	}); err != nil {
 		logf("panel: full backup failed: %v", err)
 		return
@@ -310,6 +320,14 @@ func decryptErrorMessage(err error) string {
 	}
 }
 
+// deployBackupErr phrases a pre-flight backup failure for the operator.
+func deployBackupErr(err error) string {
+	if strings.Contains(err.Error(), "DeployRoot") || strings.Contains(err.Error(), "deploy root") {
+		return "Full backup needs the project directory mounted read-only at /selfpost-deploy — add <code>.:/selfpost-deploy:ro</code> to docker-compose.yml and recreate the container."
+	}
+	return "Could not create the backup: " + err.Error()
+}
+
 // importErrorMessage maps a domain-import failure (already logged by the caller)
 // to an HTTP status and a user-facing message. Duplicate domain/login are called
 // out specifically; other failures — validation errors describing what is wrong

internal/web/view/templates/backup.html

@@ -3,13 +3,15 @@
 
 <div class="card">
   <h2>Full backup</h2>
-  <p class="muted">Download a full backup of all persistent state — the database,
+  <p class="muted">Download a self-contained backup of the whole instance —
-  every domain's DKIM key and the application credentials. Use it to move the
+  <code>data/</code> (database, DKIM keys, application credentials, and the
-  whole server to a new machine: restore it into a container of the
+  Postfix queue), <code>docker-compose.yml</code>, <code>.env</code>, and
-  <strong>same SelfPost version</strong>, with the same data mount, before first
+  <code>certs/</code>. Extract it into an empty project directory on a new
-  start. TLS certificates and the mail queue are not included.</p>
+  machine, adjust hostname or proxy settings if needed, and start a container of
+  the <strong>same SelfPost version</strong> before first boot. The reverse-proxy
+  vhost is not included — set that up separately on the new host.</p>
   <p class="muted"><strong>The backup file is a secret</strong> (it contains
-  private keys and credentials). Store and transfer it securely and delete it
+  private keys, TLS material, and credentials). Store and transfer it securely and delete it
   once the restore succeeds. Encrypting it below is the simplest way to do that:
   the download is then a <code>.spbk</code> file (SelfPost backup) that only
   the password opens.</p>

internal/web/web.go

@@ -40,11 +40,13 @@ type Config struct {
 	// the log-tailer role follows in cmd/panel.
 	MailLogPath string
 	// DataDir and DBPath locate the persistent state a full backup archives
-	// (architecture.md § Persistence); Version is stamped into the backup
+	// (architecture.md § Persistence); DeployRoot is the operator project
-	// manifest. They mirror the panel's own configuration.
+	// directory (docker-compose.yml, .env, certs/); Version is stamped into
-	DataDir string
+	// the backup manifest. They mirror the panel's own configuration.
-	DBPath  string
+	DataDir    string
-	Version string
+	DBPath     string
+	DeployRoot string
+	Version    string
 	// TrustedProxyCIDRs are the reverse-proxy addresses allowed to supply
 	// X-Forwarded-For (env TRUSTED_PROXY_CIDR). A request whose
 	// direct peer (RemoteAddr) is not in this list never has its XFF header
@@ -106,6 +108,7 @@ func New(st *store.Store, domains *domain.Service, apps *app.Service, cfg Config
 		MailLogPath:            cfg.MailLogPath,
 		DataDir:                cfg.DataDir,
 		DBPath:                 cfg.DBPath,
+		DeployRoot:             cfg.DeployRoot,
 		Version:                cfg.Version,
 		TLSCertFile:            cfg.TLSCertFile,
 		OpenDKIMSocket:         cfg.OpenDKIMSocket,