selfpost/internal/milter/milter.go

// Package milter implements the SelfPost journal-milter: a lightweight milter
// (architecture.md § Mail path) attached to Postfix's smtpd_milters alongside
// OpenDKIM. On the receive path it reads the SASL login, From, recipients and
// Subject of each accepted message and records one send-log row per (queue-id,
// recipient), giving the panel a structured, filterable history that raw
// mail.log cannot.
//
// It is monitoring only: it never rejects, and every callback returns Continue
// or Accept so a failure of this milter can never block the relay. Postfix is
// configured with default_action=accept for this milter's socket, so even a
// crash or hang fails open (architecture.md § Mail path).
package milter

import (
	"context"
	"log"
	"net"
	"net/textproto"
	"strings"
	"time"

	"github.com/emersion/go-milter"

	"github.com/mixeme/selfpost/internal/mailhdr"
	"github.com/mixeme/selfpost/internal/store"
)

// Store is the persistence the milter needs on the receive path: recording
// accepted messages (architecture.md § Mail path) and, for level-2 rate
// limiting (guide § Rate limiting), looking up the configured limits and
// counting recent messages. *store.Store satisfies it; tests substitute a
// fake.
type Store interface {
	InsertQueued(e store.SendLogEntry) error
	InsertRejected(e store.SendLogEntry) error
	RateLimit(scope, ref string) (store.RateLimit, bool, error)
	CountMessages(scope, ref string, since time.Time) (int64, error)
	ApplicationByLogin(login string) (store.Application, error)
}

// session accumulates the fields of one message as the milter callbacks fire.
// Milter macros arrive per-stage and do not accumulate, so each value is
// captured at the stage that carries it (architecture.md § Mail path): SASL
// login and From at MAIL, each recipient at RCPT, Subject in the headers, and
// the queue-id at end-of-message. go-milter creates one session per
// connection; a connection may carry several messages, so per-message fields
// are reset at MailFrom (the start of every transaction).
type session struct {
	milter.NoOpMilter
	rec Store
	// flight is shared by every session of the process; it holds the messages
	// that passed the level-2 check but are not in the send log yet. Nil is a
	// valid zero value (no in-flight accounting).
	flight *inflight

	// clientIP is the client's address. Postfix gives it at Connect, once per
	// connection, and again with every MAIL FROM as the {client_addr} macro
	// (milter_mail_macros in build/postfix-config.sh). The second is the one
	// that can be relied on: see MailFrom.
	clientIP string

	login    string
	from     string
	rcpts    []string
	subject  string
	reserved []*reservation // level-2 slots held by the current message
}

// Connect captures the client IP of a connection's first message. It is not
// enough on its own - see MailFrom.
func (s *session) Connect(host, family string, port uint16, addr net.IP, m *milter.Modifier) (milter.Response, error) {
	if addr != nil {
		s.clientIP = addr.String()
	}
	return milter.RespContinue, nil
}

// MailFrom starts a new message: reset per-message state, then capture the
// envelope sender and the SASL login ({auth_authen}, carried by the MAIL-stage
// macros). This is also the earliest stage where both the sending domain (from
// the sender) and the application (the login) are known, so the level-2 rate
// limit is enforced here: over the limit, the message is refused with a 4xx
// tempfail before recipients are even offered (guide § Rate limiting).
// Enforcement is fail-open — see overLimit.
//
// The client address is read again here, from the {client_addr} macro. The
// milter library replaces the session with a new one after every reply that is
// not "continue" - a refusal, or the accept that used to end a message - and
// Postfix does not send Connect again on the same connection. A session made
// that way never saw the client, so every message of a connection after the
// first, and every MAIL FROM after a refused one, used to be judged with no
// client address: the level-2 limit and an application's client-address list
// both let it through. (Found on 2026-10-12; test/e2e sends two MAIL FROM on
// one connection.)
func (s *session) MailFrom(from string, m *milter.Modifier) (milter.Response, error) {
	s.releaseReservations() // a previous transaction that ended without EOM/ABORT
	if ip := clientAddr(m); ip != "" {
		s.clientIP = ip
	}
	s.from = cleanAddress(from)
	s.login = macro(m, "auth_authen")
	s.rcpts = nil
	s.subject = ""
	if !s.authIPAllowed() {
		s.recordRejected(store.ReasonClient)
		return milter.RespTempFail, nil
	}
	if s.overLimit() {
		s.recordRejected(store.ReasonLimit)
		return milter.RespTempFail, nil
	}
	return milter.RespContinue, nil
}

// RcptTo records each recipient. Postfix calls this once per recipient, which
// is what lets the journal keep a separate row per (queue-id, recipient).
func (s *session) RcptTo(rcpt string, m *milter.Modifier) (milter.Response, error) {
	s.rcpts = append(s.rcpts, cleanAddress(rcpt))
	return milter.RespContinue, nil
}

// Header captures the Subject. Only the first Subject header is kept.
func (s *session) Header(name, value string, m *milter.Modifier) (milter.Response, error) {
	if s.subject == "" && textproto.CanonicalMIMEHeaderKey(name) == "Subject" {
		s.subject = mailhdr.DecodeSubject(value)
	}
	return milter.RespContinue, nil
}

// Body fires at end-of-message, when the queue-id macro {i} is set and the
// message is about to be committed to the queue. This is where the "queued"
// rows are written. The reply is "continue", which at end-of-message lets the
// message through just as "accept" does - and, unlike it, leaves this session
// in place for the connection's next message (see MailFrom).
func (s *session) Body(m *milter.Modifier) (milter.Response, error) {
	s.record(macro(m, "i"))
	// The rows are in the send log now, so the stored count sees this message
	// and its level-2 slots are no longer needed.
	s.releaseReservations()
	return milter.RespContinue, nil
}

// Abort ends the current transaction without an end-of-message (client RSET, or
// Postfix rejecting the message for its own reasons). No send-log row will be
// written, so the level-2 slots this message held must go back.
func (s *session) Abort(m *milter.Modifier) error {
	s.releaseReservations()
	s.rcpts = nil
	s.subject = ""
	return nil
}

// macro reads a milter macro, tolerating Postfix's convention of wrapping
// multi-character macro names in curly braces (e.g. {auth_authen}) while
// single-character names (e.g. i) arrive bare. go-milter stores whatever name
// Postfix sends verbatim, so a lookup must try both forms.
func macro(m *milter.Modifier, name string) string {
	if v, ok := m.Macros[name]; ok {
		return v
	}
	return m.Macros["{"+name+"}"]
}

// clientAddr is the client's address from the {client_addr} macro, or "" when
// Postfix did not send one that reads as an address. An IPv6 address may come
// in Sendmail's form, with "IPv6:" in front.
func clientAddr(m *milter.Modifier) string {
	raw := strings.TrimSpace(macro(m, "client_addr"))
	if len(raw) > 5 && strings.EqualFold(raw[:5], "IPv6:") {
		raw = raw[5:]
	}
	ip := net.ParseIP(raw)
	if ip == nil {
		return ""
	}
	return ip.String()
}

// record writes one send-log row per recipient. Failures are logged, never
// propagated: journalling must not affect mail acceptance (architecture.md §
// Mail path).
func (s *session) record(queueID string) {
	domain := domainOf(s.from)
	rcpts := s.rcpts
	if len(rcpts) == 0 {
		// No recipient seen (unusual) — still record the message so it is
		// visible in the log rather than silently dropped.
		rcpts = []string{""}
	}
	for _, to := range rcpts {
		err := s.rec.InsertQueued(store.SendLogEntry{
			QueueID:  queueID,
			Domain:   domain,
			AppLogin: s.login,
			From:     s.from,
			To:       to,
			Subject:  s.subject,
		})
		if err != nil {
			log.Printf("journal-milter: record %s -> %s: %v", queueID, to, err)
		}
	}
}

// cleanAddress strips the angle brackets and any ESMTP parameters Postfix may
// pass with an address, leaving the bare mailbox.
func cleanAddress(a string) string {
	a = strings.TrimSpace(a)
	if i := strings.IndexByte(a, ' '); i >= 0 { // drop "addr SIZE=… BODY=…" params
		a = a[:i]
	}
	a = strings.TrimPrefix(a, "<")
	a = strings.TrimSuffix(a, ">")
	return a
}

// domainOf returns the lower-cased domain of an email address, or "" if there
// is no domain part. Sender binding guarantees the From domain equals the
// application's domain, so this is the sending domain (architecture.md § Mail
// path).
func domainOf(addr string) string {
	if i := strings.LastIndexByte(addr, '@'); i >= 0 {
		return strings.ToLower(addr[i+1:])
	}
	return ""
}

// Serve runs the journal-milter on ln until ctx is cancelled. Each connection
// gets a fresh session bound to rec. It returns nil on a clean shutdown.
func Serve(ctx context.Context, ln net.Listener, rec Store) error {
	flight := &inflight{} // shared: the level-2 window spans all connections
	srv := &milter.Server{
		NewMilter: func() milter.Milter { return &session{rec: rec, flight: flight} },
		Actions:   0,                // read-only: we make no message modifications
		Protocol:  milter.OptNoBody, // the journal needs headers/EOM, not the body
	}

	go func() {
		<-ctx.Done()
		_ = srv.Close()
	}()

	if err := srv.Serve(ln); err != nil {
		if ctx.Err() != nil {
			return nil // expected: Close() during shutdown unblocks Serve
		}
		return err
	}
	return nil
}