Files
selfpost/cmd/panel/sendercheck.go
T
mixandClaude Opus 5.5 f2ad699473
test / test (push) Canceled after 0s
supervision as supervisord does it: Postfix stopped, give-ups FATAL, reload's exit read
C-P42. postfix-script's start-fg runs master as its child and master
calls setsid() (Postfix 3.7.11, conf/postfix-script; src/master/master.c);
supervisord signals the pid alone (supervisor 4.2.5, process.py,
Subprocess.kill()). A stop of program postfix left master running - a
restart then found "already running" - and a container stop cut Postfix
off with SIGKILL. The wrapper now stays the parent of "postfix start-fg"
and on TERM/INT runs "postfix stop", asking again while start-fg is still
in its checks (master -t). stopwaitsecs=15.

C-V6. The wrapper's give-up on the milter sockets came after the default
startsecs, so it was EXITED and restarted for ever. startsecs is now
MILTER_WAIT_TIMEOUT + 10, exported by the entrypoint as POSTFIX_STARTSECS
and expanded by supervisord (options.py, processes_from_section(); a
non-number MILTER_WAIT_TIMEOUT stops the start): a give-up is "Exited too
quickly", BACKOFF, FATAL after startretries, crashexit. For those seconds
after each start the program is STARTING (the healthcheck's 90 s start
period covers it; the sender check counts no downtime then).

C-V5. logrotate had startsecs=0, so a refused config restarted it every
second for ever. startsecs=1: FATAL after startretries; crashexit reads
the event's processname and leaves logrotate's FATAL on Server > Health.

B-U2. "supervisorctl start" returns when a startsecs=0 program is RUNNING,
not when it ends, and mapped "already started" to success. The panel now
speaks supervisord's XML-RPC itself (internal/supervisor, RunOnce):
startProcess without waiting, getProcessInfo until it leaves
STARTING/RUNNING, exitstatus 0 or an error; a run in progress is waited
out and one of its own follows. A failed reload while program postfix is
not RUNNING is logged, not an error: the next master reads the files.
C-V10: postfix-reload rests EXITED after a run; the e2e process check
takes STOPPED or EXITED. C-P34: the dead "postfix set-permissions" branch
goes - postfix check's create-missing builds the queue tree.

Stand (2026-10-14, make e2e, exit 0; MILTER_WAIT_TIMEOUT=10 on the stand):
new supervision_stops_postfix_and_gives_up - supervisorctl restart postfix
writes postfix-script's "stopping the Postfix mail system" and leaves one
master; with the panel's sockets removed, start answers "postfix: ERROR
(spawn error)" (finish() sets spawnerr "Exited too quickly", onwait()
reads it first) and Postfix comes up once the panel is back; a
group-writable logrotate config ends FATAL with the container up; the
panel's Reload configuration answers only after mail.log has "refreshing
the Postfix mail system", postfix-reload EXITED. session_survives_restart
sees the stop line for the container's restart. Measured: master's own
"terminating on signal 15" never reaches mail.log (master TERMs its group,
postlogd included, before it logs). go vet and go test ./... pass on the
server (24 packages; new unit tests of RunOnce against a fake supervisord).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-14 23:49:25 +03:00

199 lines
6.9 KiB
Go

package main
import (
"context"
"log"
"os"
"time"
"github.com/mixeme/selfpost/internal/domain"
"github.com/mixeme/selfpost/internal/health"
"github.com/mixeme/selfpost/internal/milter"
"github.com/mixeme/selfpost/internal/postfix"
"github.com/mixeme/selfpost/internal/store"
)
// aliveEvery is how often the sender check marks itself alive. The gap a
// restart finds since the last mark is the check's downtime, so the mark's
// age is the error of that figure.
const aliveEvery = 2 * time.Second
// serveSenderCheck runs the sender check (internal/milter/sender.go) on a
// socket of its own. Postfix attaches that socket strictly
// (default_action=tempfail in build/postfix-config.sh; Postfix 3.7.11,
// src/milter/milter8.c, milter8_comm_error(): "451 4.7.1 Service unavailable -
// try again later"), so while this role is not serving, mail is deferred:
// what that costs is counted here and
// by the log tailer, and shown on Server > Health
// (docs/plans/from-header-binding.md § Statistics).
func serveSenderCheck(ctx context.Context, cfg config, st *store.Store) error {
ln, err := listenMilter(cfg.senderSocket)
if err != nil {
return err
}
log.Printf("sender-check listening on %s", cfg.senderSocket)
// Statistics are the database's business and supervisord's, and the check
// is neither: they are kept beside it, and nothing of them is waited for
// before it serves.
now := time.Now()
mark := cfg.senderSocket + ".alive"
// The mark's age is read before the mark is kept again: asking supervisord
// may take half a minute, and the mark must not go stale meanwhile, or a
// restart in that half minute would count it as downtime.
var markAt time.Time
if fi, err := os.Stat(mark); err == nil {
markAt = fi.ModTime()
}
go keepAlive(ctx, mark, st)
go func() {
if err := st.StartSenderCheckStats(now); err != nil {
log.Printf("sender-check: statistics: %v", err)
}
if down, estimated := senderCheckDowntime(markAt, now, postfixStarted); down > 0 {
if estimated {
log.Printf("sender-check: was not answering for at most %s (supervisord did not say since when Postfix ran)", down.Round(time.Second))
} else {
log.Printf("sender-check: was not answering for %s while Postfix was running", down.Round(time.Second))
}
for _, part := range byDay(now.Add(-down), now) {
if err := st.AddSenderCheckDown(part.day, part.down, estimated); err != nil {
log.Printf("sender-check: statistics: %v", err)
}
}
}
}()
// The two tables the mail path itself goes by: whom Postfix lets send as
// what, and what OpenDKIM signs.
bind := milter.NewBindings(postfix.New(cfg.postfixDir).SenderLoginMapsPath())
signers := milter.NewSigners(domain.NewOpenDKIM(cfg.opendkimDir).SigningTablePath())
return milter.ServeSender(ctx, ln, bind, signers, st)
}
// postfixState is what supervisord said about Postfix: since when it runs, if
// it does; known is false when supervisord did not answer.
type postfixState struct {
started time.Time
running, known bool
}
// senderCheckDowntime is for how long the check was not serving before now
// while Postfix was: the time since the mark was last set (markAt; zero
// when there is none), or since
// Postfix started if that was later. No mark means the container is new, and
// a Postfix that is not running means mail was stopped for another reason -
// a rollout, a reboot - and neither is the check's downtime. When supervisord
// could not say, the time since the mark is taken and estimated is true: an
// upper bound, since Postfix may not have been running all of it (audit
// 2026-10-12, stage 2b - until then such a start counted nothing).
func senderCheckDowntime(markAt, now time.Time, ask func() postfixState) (down time.Duration, estimated bool) {
if markAt.IsZero() {
return 0, false
}
from := markAt
p := ask()
switch {
case !p.known:
estimated = true
case !p.running:
return 0, false
case p.started.After(from):
from = p.started
}
if d := now.Sub(from); d > 0 {
return d, estimated
}
return 0, false
}
// dayPart is the part of a stretch of downtime that fell on one UTC day.
type dayPart struct {
day time.Time
down time.Duration
}
// byDay cuts the time from 'from' to 'to' at the UTC midnights between them,
// so that a night's outage is not all booked on the morning it ended.
func byDay(from, to time.Time) []dayPart {
from, to = from.UTC(), to.UTC()
var parts []dayPart
for from.Before(to) {
next := time.Date(from.Year(), from.Month(), from.Day(), 0, 0, 0, 0, time.UTC).AddDate(0, 0, 1)
if next.After(to) {
next = to
}
parts = append(parts, dayPart{day: from, down: next.Sub(from)})
from = next
}
return parts
}
// postfixAskFor is how long postfixStarted keeps asking a supervisord that
// does not answer - at the container's start it may not be listening yet.
var postfixAskFor, postfixAskEvery = 30 * time.Second, 2 * time.Second
// postfixStarted asks supervisord since when Postfix has been running, again
// and again for postfixAskFor while it does not answer. supervisor 4.2.5,
// supervisor/rpcinterface.py, _interpretProcessInfo(): the uptime runs from
// the spawn of program "postfix", which is build/postfix-wrapper.sh; it waits
// for the milter sockets (up to MILTER_WAIT_TIMEOUT) before it execs
// "postfix start-fg", so the time given is up to that much early
// (assumptions A-46). For startsecs - that wait plus ten seconds
// (build/supervisord.conf) - after its start the program is STARTING, not
// RUNNING, and is taken here as not running: a panel restart within that
// time after Postfix's own counts no downtime.
func postfixStarted() postfixState {
deadline := time.Now().Add(postfixAskFor)
for {
procs, err := health.Processes()
if err == nil {
for _, p := range procs {
if p.Name != "postfix" || p.State != "RUNNING" {
continue
}
if up, ok := health.Uptime(p.Detail); ok {
return postfixState{started: time.Now().Add(-up), running: true, known: true}
}
}
return postfixState{known: true}
}
if time.Now().After(deadline) {
// Said aloud: this start's downtime is then an estimate.
log.Printf("sender-check: statistics: when Postfix started is not known: %v", err)
return postfixState{}
}
time.Sleep(postfixAskEvery)
}
}
// keepAlive sets the mark until ctx ends, and once a day drops the days of
// the statistics that are older than a year.
func keepAlive(ctx context.Context, path string, st *store.Store) {
touch := func() {
now := time.Now()
if err := os.Chtimes(path, now, now); err != nil {
if err := os.WriteFile(path, nil, 0o644); err != nil {
log.Printf("sender-check: alive mark: %v", err)
}
}
}
touch()
tick := time.NewTicker(aliveEvery)
defer tick.Stop()
prune := time.NewTicker(24 * time.Hour)
defer prune.Stop()
for {
select {
case <-ctx.Done():
return
case <-tick.C:
touch()
case <-prune.C:
if err := st.PruneSenderCheckDays(time.Now()); err != nil {
log.Printf("sender-check: statistics: %v", err)
}
}
}
}