mixandClaude Opus 5.5
dab7715e80
test / test (push) Canceled after 0s
M17: the supervisord control socket is root:supervisor 0770, a group whose one member is the panel; OpenDKIM and Postfix keep `selfpost` for the files under /data and no longer reach the socket. L30, read in OpenDKIM 2.11.0~beta2's source first: it logs through syslog(3) only and has no Logfile option, and nothing in the container served /dev/log. internal/syslogrelay (the panel binary with -syslog-relay=/run/syslog/log, program syslog-relay before OpenDKIM, /dev/log a link to its socket) passes the datagrams to stdout, error and worse marked. opendkim.conf: Syslog yes, Canonicalization relaxed/simple, OversignHeaders From (RFC 6376 § 3.4, § 8.15). e2e: OpenDKIM's start line reaches the container log; every program RUNNING; DKIM verifies. Tested on the test server: go vet + go test of 26 packages, make e2e (all pass, 626 s) on this tree. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
239 lines
12 KiB
Bash
239 lines
12 KiB
Bash
#!/bin/sh
|
|
# Container entrypoint (runs as root, PID 1 until it execs supervisord).
|
|
#
|
|
# SELFPOST_HOSTNAME is checked first (plan B.3): it must fail fast with a clear
|
|
# message before /data normalisation or Postfix config, so a bad identity never
|
|
# looks like a permissions or packaging problem (and so the e2e hostname-gate
|
|
# tests see the FATAL text rather than an earlier set -e abort).
|
|
set -e
|
|
|
|
# SELFPOST_HOSTNAME is an identity, not a setting with a safe default: it must
|
|
# simultaneously match the PTR/rDNS record, the certificate CN/SAN, and the
|
|
# Cyrus SASL realm. The panel (main.go saslRealm()) and postfix-config.sh each
|
|
# fall back independently when it's unset — to `localhost` and to the container
|
|
# hostname respectively — so accounts get written under one realm and looked up
|
|
# under another and authentication silently fails for every application, while
|
|
# HELO also stops matching the PTR record and mail that does go out lands in
|
|
# spam. No fallback can be correct, so fail loudly here, before either side of
|
|
# that split has a chance to run, rather than leave a green panel with broken
|
|
# mail.
|
|
if [ -z "$SELFPOST_HOSTNAME" ]; then
|
|
cat >&2 <<'EOF'
|
|
FATAL: SELFPOST_HOSTNAME is not set.
|
|
|
|
This is the mail server's identity: it becomes the Postfix HELO/EHLO name,
|
|
the Cyrus SASL realm that application passwords are looked up under, and it
|
|
must match the TLS certificate's CN/SAN as well as this server's PTR (reverse
|
|
DNS) record. There is no safe default — guessing any one of these wrong
|
|
breaks authentication for every application or sends outgoing mail to spam,
|
|
silently.
|
|
|
|
Set it to the mail server's fully-qualified domain name, e.g.:
|
|
|
|
SELFPOST_HOSTNAME=mail.example.com
|
|
|
|
in the .env file next to your docker-compose.yml (see deploy/.env.example).
|
|
EOF
|
|
exit 1
|
|
fi
|
|
|
|
case "$SELFPOST_HOSTNAME" in
|
|
*[\ \ ]* | *://* | *:* )
|
|
echo "FATAL: SELFPOST_HOSTNAME must be a bare hostname (no scheme, port, or spaces): \"$SELFPOST_HOSTNAME\"" >&2
|
|
echo 'Example: SELFPOST_HOSTNAME=mail.example.com' >&2
|
|
exit 1
|
|
;;
|
|
*.*)
|
|
;;
|
|
*)
|
|
echo "FATAL: SELFPOST_HOSTNAME must be a fully-qualified domain name (at least one dot): \"$SELFPOST_HOSTNAME\"" >&2
|
|
echo 'Example: SELFPOST_HOSTNAME=mail.example.com' >&2
|
|
exit 1
|
|
;;
|
|
esac
|
|
|
|
# The persistent root /data is a host bind mount, so it arrives owned by the
|
|
# host user (typically root), not by the unprivileged panel user that actually
|
|
# writes the SQLite database, setup token and DKIM keys. Fix its ownership here
|
|
# — the one place still running as root — before handing off to supervisord,
|
|
# which starts the panel as the panel user.
|
|
#
|
|
# Mode must stay world-traversable (0755): OpenDKIM and Postfix reach their
|
|
# trees under /data as other users. Go's testing.TempDir is 0700, and a bare
|
|
# chown would leave that mode in place — opendkim then cannot read KeyTable and
|
|
# the container crash-loops (e2e TestHostnameGate/valid_hostname_starts).
|
|
# (Go: testing.TempDir uses os.MkdirTemp, src/os/tempfile.go: "created with
|
|
# mode 0o700".)
|
|
chown panel:panel /data
|
|
chmod 755 /data
|
|
# Restored backups or previously-created state may contain panel-owned files
|
|
# under /data; make sure they stay writable without disturbing anything that a
|
|
# later phase deliberately hands to another service. /data/log is exempt: it is
|
|
# deliberately owned by postfix (postlogd writes the delivery log there) and is
|
|
# normalised on its own below.
|
|
find /data -mindepth 1 -maxdepth 1 ! -user panel ! -name log ! -name postfix -exec chown -R panel:panel {} +
|
|
|
|
# DKIM key tree. The panel (user `panel`) generates keys and writes
|
|
# the OpenDKIM tables; OpenDKIM (user `opendkim`) must read them. Normalise the
|
|
# tree on every start so it is correct whether /data is fresh, restarted, or
|
|
# just restored from a backup:
|
|
# - group `selfpost` + setgid on directories so anything the panel creates
|
|
# inherits the shared group OpenDKIM traverses (inode(7), "The
|
|
# set-group-ID bit": files created in such a directory take its group);
|
|
# - private keys and tables group-readable (0640);
|
|
# - both table files present (empty is fine) BEFORE OpenDKIM starts, so the
|
|
# daemon comes up cleanly with no domains yet.
|
|
mkdir -p /data/opendkim/keys
|
|
for t in /data/opendkim/KeyTable /data/opendkim/SigningTable; do
|
|
[ -e "$t" ] || : > "$t"
|
|
done
|
|
chown -R panel:selfpost /data/opendkim
|
|
find /data/opendkim -type d -exec chmod 2750 {} +
|
|
chmod 0640 /data/opendkim/KeyTable /data/opendkim/SigningTable
|
|
find /data/opendkim/keys -type f -name '*.private' -exec chmod 0640 {} +
|
|
|
|
# Application SASL accounts. The panel (user `panel`) writes the
|
|
# sasldb2 via saslpasswd2; Postfix (user `postfix`) reads it to authenticate SMTP
|
|
# clients. Share it through the `selfpost` group the same way as the DKIM tree:
|
|
# setgid directory so new files inherit the group, and the database itself
|
|
# group-readable (0640).
|
|
mkdir -p /data/sasl
|
|
chown -R panel:selfpost /data/sasl
|
|
chmod 2750 /data/sasl
|
|
[ -e /data/sasl/sasldb2 ] && chmod 0640 /data/sasl/sasldb2
|
|
# The copy a password change is made on (internal/app, replaceSASLDB), left
|
|
# by a panel killed mid-change: a second copy of every password, which the
|
|
# next change would remove anyway.
|
|
rm -f /data/sasl/sasldb2.new
|
|
|
|
# Postfix state under /data (architecture.md § Persistence). The panel writes
|
|
# sender_login_maps; Postfix owns the on-disk queue tree under queue/.
|
|
mkdir -p /data/postfix/queue
|
|
[ -e /data/postfix/sender_login_maps ] || : > /data/postfix/sender_login_maps
|
|
# Inbound relay maps (written by the panel when INBOUND_RELAY_ENABLE=true).
|
|
# Empty files keep postfix check happy if the flag is on before any domain exists.
|
|
for f in relay_domains transport relay_recipients tls_policy; do
|
|
[ -e "/data/postfix/$f" ] || : > "/data/postfix/$f"
|
|
done
|
|
# Every map here is the panel's to write and Postfix's to read - the sender
|
|
# map, the inbound and the DMARC maps alike - so each file beside queue/ is
|
|
# handed to the panel, group selfpost, whatever its name. A restored archive's
|
|
# files arrive owned by whoever unpacked them (a backup records no owner, and
|
|
# tar run as root makes them root's), and the first start after a restore
|
|
# reads every one of them to compare it with the archive's record: one left
|
|
# to root alone is a restore refused on every start (review of audit stage 3,
|
|
# H1 - the DMARC maps were not among the names listed here).
|
|
find /data/postfix -mindepth 1 -maxdepth 1 -type f -exec chown panel:selfpost {} + -exec chmod 0640 {} +
|
|
chown panel:selfpost /data/postfix
|
|
chmod 2750 /data/postfix
|
|
|
|
# Filter lists for the external spam filter (written by the panel when
|
|
# INBOUND_RELAY_ENABLE=true, read by the antispam sidecar, which mounts this
|
|
# directory). The sidecar runs under a user of its own in another container,
|
|
# so the directory and its files are readable by anyone: they hold sender
|
|
# addresses and networks, no secrets.
|
|
mkdir -p /data/antispam
|
|
chown panel:selfpost /data/antispam
|
|
chmod 0755 /data/antispam
|
|
|
|
# Delivery log (architecture.md § Log tailer). postlogd writes it as user
|
|
# `postfix`; the panel reads it for the log-tailer and the System log page. It
|
|
# lives under /data — not the ephemeral /var/log — so the delivery lines that
|
|
# resolve a "queued" send-log row survive a container recreate.
|
|
#
|
|
# postlogd creates a missing log itself, but at 0600, which the unprivileged
|
|
# panel cannot read; so create it here (and re-normalise an existing one, plus
|
|
# whatever logrotate left behind) at 0640 owned postfix:selfpost. The setgid
|
|
# directory keeps the shared group on anything created inside it later, and
|
|
# 2750 keeps it group-traversable but not group-writable — logrotate refuses to
|
|
# rotate a log whose directory is writable by a non-root group.
|
|
# Postfix 3.7.11: src/util/logwriter.c, logwriter_open_or_die(), creates the
|
|
# file 0644, under master's umask(077) (src/master/master.c) - 0600. logrotate
|
|
# 3.21.0, logrotate.c, findNeedRotating(): "skipping ... because parent
|
|
# directory has insecure permissions" when the directory's group is not root
|
|
# and has write permission.
|
|
mkdir -p /data/log
|
|
[ -e /data/log/mail.log ] || : > /data/log/mail.log
|
|
chown -R postfix:selfpost /data/log
|
|
chmod 2750 /data/log
|
|
find /data/log -type f -exec chmod 0640 {} +
|
|
|
|
# Milter socket directories. Postfix (user `postfix`) must actually CONNECT to
|
|
# the milter sockets — OpenDKIM's and the panel's — not just probe them at
|
|
# start-up. The sockets are created by the opendkim and panel
|
|
# users respectively, so bridge them to `postfix` through the shared `selfpost`
|
|
# group: group-owned + setgid dirs mean each socket created inside inherits
|
|
# group `selfpost`, and group-traversable (2750) lets postfix reach it. Without
|
|
# this, smtpd cannot talk to OpenDKIM and, because signing is strict
|
|
# (default_action=tempfail), rejects all mail.
|
|
mkdir -p /run/opendkim /run/selfpost
|
|
chown opendkim:selfpost /run/opendkim
|
|
chown panel:selfpost /run/selfpost
|
|
chmod 2750 /run/opendkim /run/selfpost
|
|
# A container that was killed leaves its sockets behind, and a file nobody
|
|
# listens on would satisfy postfix-wrapper.sh's wait: Postfix would start
|
|
# before the sender check does and defer mail until it is there. The check's
|
|
# alive mark goes too: it tells the downtime of the panel restarting inside a
|
|
# running container, and a restart of the whole container is not the check's
|
|
# downtime (guide § Health) - a mark left from before would count the whole
|
|
# outage when supervisord cannot say since when Postfix runs.
|
|
# (test(1), -S: true for any socket file, whether or not anything listens.)
|
|
rm -f /run/opendkim/*.sock /run/selfpost/*.sock /run/selfpost/*.alive
|
|
|
|
# The container's /dev/log: a link to the socket the syslog-relay program (the
|
|
# panel's binary, as `panel`) listens on, so what OpenDKIM logs through
|
|
# syslog(3) reaches the container's log (build/supervisord.conf; audit
|
|
# 2026-10-12, L30). The directory is the relay's and reachable by all: the
|
|
# socket is the container's local log, as /dev/log is on a host.
|
|
mkdir -p /run/syslog
|
|
chown panel:panel /run/syslog
|
|
chmod 0755 /run/syslog
|
|
rm -f /run/syslog/log
|
|
ln -sfn /run/syslog/log /dev/log
|
|
|
|
# Generate the outbound-relay Postfix configuration from the environment (spec
|
|
# 5). Kept out of the image build so cert paths, rate limits, hostname and the
|
|
# optional 587 service are all driven by env at run time, and re-derived on every
|
|
# start the same way the /data normalisation above is.
|
|
/usr/local/bin/postfix-config.sh
|
|
|
|
# The queue tree, on a first start or after a restore, is already built here:
|
|
# postfix-config.sh ends with "postfix check", whose check-fatal runs
|
|
# "post-install create-missing" (Postfix 3.7.11, conf/postfix-script;
|
|
# conf/postfix-files, "$queue_directory/active:d:$mail_owner:-:700:ucr").
|
|
# A "postfix set-permissions" for a missing active/ stood here and never ran
|
|
# (assumptions C-P34).
|
|
chown -R postfix:postfix /data/postfix/queue
|
|
# The recursive chown above would leave public/ and maildrop/ in group postfix.
|
|
# Postfix keeps those two in its setgid group: postqueue and postdrop are setgid
|
|
# postdrop and reach the showq socket and the maildrop directory through that
|
|
# group alone. With the wrong group `postqueue -p` run by the panel answers
|
|
# "Connect to the Postfix showq service: Permission denied" and the panel cannot
|
|
# read the queue (the Queue card and the Outbound queue page).
|
|
chgrp postdrop /data/postfix/queue/public /data/postfix/queue/maildrop
|
|
# It would also leave the queue directory itself and pid/ owned by postfix.
|
|
# Postfix keeps those two owned by root (master, which runs as root, is the only
|
|
# writer) and logs "warning: not owned by root" for each at every start.
|
|
# (Postfix 3.7.11, conf/postfix-files: $queue_directory root 755, maildrop
|
|
# $setgid_group 730, public $setgid_group 710, pid root 755, the other queue
|
|
# directories $mail_owner 700; conf/postfix-script, "check-warn": "not owned by
|
|
# root".)
|
|
chown root /data/postfix/queue /data/postfix/queue/pid
|
|
|
|
# [program:postfix]'s startsecs (build/supervisord.conf): longer than the
|
|
# wrapper's wait for the milter sockets, so its exit at the end of the wait is
|
|
# one supervisord counts as too quick. A value that is not a number stops the
|
|
# start here.
|
|
wait_timeout="${MILTER_WAIT_TIMEOUT:-30}"
|
|
case "$wait_timeout" in
|
|
'' | *[!0-9]*)
|
|
echo "entrypoint: MILTER_WAIT_TIMEOUT must be a whole number of seconds, got '$wait_timeout'" >&2
|
|
exit 1
|
|
;;
|
|
esac
|
|
# expr, not $((...)): dash's arithmetic reads "010" as octal and refuses
|
|
# "08"; expr takes decimal (review of stage 2c, F11).
|
|
export POSTFIX_STARTSECS=$(expr "$wait_timeout" + 10)
|
|
|
|
exec /usr/bin/supervisord -c /etc/supervisor/supervisord.conf
|