mix/gosentry
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Compare commits

base: mix/gosentry:a446f6729361852f14e33427097573209838d26d
Branches Tags
mix/gosentry:main
mix/gosentry:v1.0.3 mix/gosentry:v1.0.0
...
compare: mix/gosentry:v1.0.3
Branches Tags
mix/gosentry:main
mix/gosentry:v1.0.3 mix/gosentry:v1.0.0

157 Commits
a446f67293 ... v1.0.3

Author SHA1 Message Date
mix 6a03ea4a20 release: v1.0.3 
Bump version, update CHANGELOG, and retake README screenshots
(Jobs, History, Settings) to match the current GUI.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
 2026-08-07 04:14:10 +03:00
mix 4fb9bf6ff3 docs: reconcile the documentation with the code 
An audit of every document against the source turned up drift that had
accumulated since the 1.0.2 passes. The screenshot paths README and
DEVELOPMENT still point at are deliberately left alone - the images move
again when they are retaken.

ARCHITECTURE: the jobs_view.go split is six files, not five, since
extracting jobs_view_state.go was never counted; the statistics table
lists TimedRunCount, which the AvgDurationMS formula already referenced;
the store edge of the diagram names methods that exist (LoadJobs and
LoadConfig never did); and startup says that Service.Start is called from
newMainView rather than from Run.

TESTS: three tests had no entry, the latter two being regression tests
for 1.0.2 fixes:

  TestLoadOrCreateConfigPreservesZeroRetentionLimits
  TestWriteJSONReplacesFileAtomically
  TestQuoteLeadingWindowsProgramPathPicksEarliestBoundedExtension

The deliberately-uncovered list now covers everything the profile
actually reports at 0%, so the next redundancy pass does not flag Config,
Paths, SaveJobs, or the isEvent markers as gaps. The coverage section
measures through -coverprofile and says outright that the per-package
percentages -coverpkg prints are not the total - 2.6/8.9/25.5/1.0/61.5
against a real 84.1%.

ROADMAP: the over-the-guideline table was re-measured (service.go is over
it too now, making six), with a note to re-measure rather than trust it.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-08-07 03:59:48 +03:00
mix 9b7a0565ba Rename 2026-08-07 03:43:32 +03:00
mix da8fe10365 docs: retire the whole-project review plan, correct its CHANGELOG traces 
Every item in docs/PROJECT_REVIEW_PLAN.md is now either landed or moved to
ROADMAP.md, so the working document retires the way TEST_REVIEW_PLAN.md did.
Nothing else referenced it.

Two 1.0.2 Internal entries were out of step with what shipped: the timing
diagnostic is written as notify-timing.tsv (kept out of CleanupLogs and off
the UI thread), not notify-timing.log, and the removal of the two per-run
no-op jobs.json rewrites - along with the run-start rollback and the start
error RunDue used to surface - was not recorded at all.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-08-07 03:42:29 +03:00
mix 18da021526 chore: land the remaining low-severity items from the whole-project review 
Phase 11 of PROJECT_REVIEW_PLAN.md: the themed cleanup pass over every
low-severity finding still open (2.2-2.3, 3.4-3.6, 4.3-4.7, 6.4-6.7,
7.1-7.3, 8.2-8.3, 9.1-9.4, and the under-documented decisions in §10/§11).

Behavioral fixes:
- Reassign duplicate job IDs in a hand-edited jobs.json instead of letting
  two jobs share one runtime, schedule entry, and SeedStats bucket.
- Disambiguate run-log file names that collide within the same second.
- Compute AvgDurationMS as DurationSumMS/TimedRunCount instead of an
  incremental integer mean, so it always matches the seeded-from-logs
  average instead of drifting from truncation error.
- Clean absolute paths in ResolveConfiguredPath so two spellings of the
  same jobs file do not trigger a spurious adoption.
- Report InstallDesktopIcon failures through ErrorOccurred instead of
  discarding them silently.
- Move settingsView's blocking AutostartStatus (PowerShell on Windows) off
  the UI thread.
- Give notify-timing.tsv its own extension so CleanupLogs no longer
  manages it as a run log.
- Replace the settingsView Save handler's second copy of validateConfig's
  rules with a bare parse, letting the Service's own error surface.

Cleanups:
- Delete collectActivity, the dead yaml tags on RunRecord, and the
  logArguments/LogArguments alias.
- Fold the two systemTrayRegistered/mainWindowHidden globals into one
  trayState instance Run owns and threads through Settings and the
  single-instance reveal path.
- Fix stale comments/docs: the frozen window-size restore claim, a
  reference to a renamed recordRun, README's "Pause all" and notification
  wording, the PowerShell quoting note for TESTS.md's coverage command,
  and scripts/test.bat's UTF-8 checkmarks under a non-UTF-8 code page.
- Document the single-instance fallback's consequence and the
  unauthenticated instance-channel port in STANDARDS.md; record the
  config-shim retirement plan in ROADMAP.md.

3.5, 7.3, and 9.4 turned out to already be fixed by earlier phases; no
change needed for those three.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
 2026-08-07 03:35:10 +03:00
mix bd7ebde68e refactor: extract the Jobs view state, track selection by job ID 
Phase 10 of the whole-project review (findings 5.1 and 5.2), folded into
the ROADMAP file-split item as that plan asks.

5.2 was a real defect. `selected` was an index into a snapshot of the jobs
slice, and every path that changed the slice patched it by hand. The one
path that could not — adopting a different jobs file, where the Service
replaces the whole list and the view only hears about it through the
refresh JobsLoaded triggers — left the details pane redrawing from an
index that belonged to the previous list, describing whichever job now sat
there (or clearing when the new list was shorter) while the list highlight
stayed put. The selection is now a job ID; rows are derived from it at
render time, and refresh ends by pointing the highlight at the selected
job, so the two can no longer disagree.

5.1: newJobsView was one 330-line constructor whose dozen closures shared
seven mutable locals. It is now a jobsView struct over a jobsViewState
that owns the snapshot, the folder filter, and the selection — the
invariant that used to be maintained by hand in five places lives in one
place — split across jobs_view.go (construction, refresh, layout),
jobs_view_state.go, jobs_view_list.go, and jobs_view_toolbar.go. The
folder-option rebuild that appeared verbatim in three handlers is one
method.

Behaviour that changed beyond the fix: switching the folder filter keeps
the current selection when the new filter still shows it, instead of
always jumping to the folder's first job.

Docs: ARCHITECTURE records the new file layout and the selection-by-ID
contract; ROADMAP drops jobs_view.go from the over-guideline table and
refreshes the other five numbers (finding 2.4); TESTS documents the new
state test file and the adoption regression test.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-08-06 22:38:47 +03:00
mix ca2a8c8aa7 fix: accept zero retention limits, retire Store() for typed accessors 
Phase 8 (PROJECT_REVIEW_PLAN.md 8.1): 0 in MaxLogFiles/MaxLogAgeDays now
means "keep everything" end to end. runner.CleanupLogs already treated
<= 0 as disabled; validateConfig, the Settings form, and
loadOrCreateConfig's backfill were the only things making that state
unreachable.

Phase 9 (1.1, rolling up 1.2, 1.3, 7.3): added Service.Config() and
Service.Paths(), copying under mu, and converted every UI site that read
Service state through the raw *storage.Store returned by Store() (now
removed). jobs_view's pause control is now driven by refreshView reading
svc.Config().Paused on every event instead of only mirroring its own tap
handler, which makes it an actual consumer of SchedulerStateChanged.
mainwindow's event listener is a real type switch, and events.go's doc
comment no longer claims a compiler exhaustiveness check Go doesn't have.
Unexported the redundant SetAutostart/AutostartStatus package functions
in platform/autostart now that only the Manager methods are used outside
the package.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
 2026-08-06 22:15:19 +03:00
mix 0c8442a8d1 perf: keep file I/O off Service.mu and untie StartOnly from the app context 
Phase 7 of the whole-project review (findings 3.2 and 3.3).

Service.mu is the lock the Fyne main thread takes on every Jobs() and
Runtime() call, so anything blocking inside it makes a UI refresh wait on
the disk. Three things did:

- Every SaveJobs/SaveConfig was a marshal, fsync, and rename under mu.
  Writes are now prepared under the lock (Store.PrepareSaveJobs /
  PrepareSaveConfig snapshot the payload and target path) and run after
  it is released. deferSaveLocked takes saveMu while mu is still held, so
  writes still reach the file in the order their snapshots were taken and
  an older snapshot can never land on top of a newer one.
- executeRun ran runner.CleanupLogs under mu after every run. It needs
  only the values already snapshotted into runEnv, so it now runs after
  the unlock — including when the job is gone, since the run still wrote
  a log file that retention covers.
- adoptJobsLocked ran runner.SeedStats under mu, reached from
  UpdateSettings on the UI thread. Seeding moved out into
  applySeededStatsLocked; UpdateSettings now reads the new jobs file and
  seeds its statistics before taking the lock, and re-checks the
  "no jobs-file switch while running" guard once it has it.

SeedStats also opened every log file twice — once to find the job, again
to read the result. readLogSummary reads job_id, state, and duration in
one pass, so each log is opened once.

StartOnly runs were built with exec.CommandContext on the app's lifecycle
context. os/exec keeps a watcher goroutine alive until Wait returns or the
context is done, and StartOnly never calls Wait, so one goroutine leaked
per run and would then try to kill a process whose handle startJobOnly had
already released. The invocation now uses context.Background(), whose nil
Done channel means no watcher is started at all.

Regression tests: TestRunJobStartOnlyLeavesNoContextWatcher (fails with 5
leaked goroutines on the old code), TestConcurrentJobOperationsLeaveTheFileMatchingMemory,
and TestUpdateSettingsSeedsAdoptedJobsFromLogs. STANDARDS gains the
no-I/O-under-mu rule and the "a StartOnly process outlives GoSentry" entry.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-08-06 21:44:51 +03:00
mix 98c820e3bd perf: cap the History list and fold column widths incrementally 
History was appended to on every recorded run and never trimmed, and every
event re-sorted the whole slice and re-measured the Job, Detail and Log
columns across every row. The per-run cost therefore grew with the number of
rows, in exactly the mode the app is designed for: left in the tray for days.

The session History now keeps the newest maxHistoryRows (1000) records, the
way maxJobLogs caps a job's own activity list, and drops the oldest from the
front, zeroing the tail so a dropped record's full captured output is not
kept alive by the backing array. Column widths move into a historyLog value
that folds each new record into the current maxima instead of rescanning.
Widths only grow within a theme, so a column never narrows when a record ages
out; a theme change is the one case that still rescans, because every stored
width was measured at the old text size.

Measured with a throwaway benchmark over 5000 accumulated records: one
refresh went from 15.8 ms to 0.9 ms. At the new cap the full width rescan
alone costs 1.5 ms, so both halves of the fix carry weight.

Plan item 6 of docs/PROJECT_REVIEW_PLAN.md (finding 3.1).

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-08-06 17:16:02 +03:00
mix 263717874c fix: remove no-op SaveJobs calls, fix PendingRuns lifecycle and cap 
Implements items 4-5 of the whole-project review's suggested order
(docs/PROJECT_REVIEW_PLAN.md):

- Drop the three SaveJobs calls in the run lifecycle (startRunLocked,
  executeRun, SetGlobalPause): none of them change a durable Job field,
  everything they touch lives on JobRuntime, which is never persisted.
  Retire TestStartRunLockedRollbackOnSaveFailure with the rollback it
  guarded, since a run can no longer fail to start this way.
- Clear PendingRuns (the "queue" overlap policy's backlog) when a job is
  disabled or the scheduler is globally paused, so resuming or
  re-enabling a job no longer replays a deferred run left over from
  before the pause/disable. Cap it at maxPendingRuns (10) so a job whose
  runs take longer than its own interval stops accumulating an unbounded
  backlog. Surface the queued count in the details pane via DisplayStats.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
 2026-08-06 17:06:55 +03:00
mix 1242b22e4f fix: Windows command quoting, atomic JSON/log writes, restore dropped test 
Implements items 1-3 of the whole-project review's suggested order
(docs/PROJECT_REVIEW_PLAN.md):

- Restore TestJobListViewIsCompact, accidentally dropped by 5b0e6fe;
  drop the redundant TestDefaultConfigUsesDetailedJobList row from
  TESTS.md and document the two other doc gaps the review found.
- Fix quoteLeadingWindowsProgramPath to find the earliest file-extension
  match at a word boundary instead of the first extension in list order,
  so a .bat/.cmd command whose argument ends in .exe no longer has its
  whole command line mistaken for the program path.
- Write gosentry.json, jobs.json, and run log files atomically (temp
  file + rename) so a crash or power loss mid-write can no longer leave
  a truncated file. Wire Service.Stop() into the app shutdown path so
  it actually runs, cancelling the run context for in-flight runs.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
 2026-08-06 16:53:59 +03:00
mix 89be009040 docs: remove the whole-project review agenda and its references 
REVIEW.md and the /review-project command are gone; other docs no
longer point at them.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
 2026-08-06 16:38:38 +03:00
mix eaa37a1192 docs: add the whole-project review action plan 
Records the findings of a review of the whole codebase against the agenda in
REVIEW.md, with a suggested order and a model recommendation per item.

The project is in good health: the engine layering holds, the Service.mu
locking contract is obeyed, and the UI layout code observes the
measure-don't-hardcode rule with tests to match. The findings concentrate in
three places instead: paths that only surface after the app has run for a
while (unbounded History growth, PendingRuns surviving a pause), durability of
the JSON files (non-atomic writes, no shutdown path), and one Windows quoting
bug reproduced outside the build, where an argument ending in .exe hijacks
program-path detection for a .bat or .cmd job.

Also settles what happened to the two domain tests TESTS.md still documents:
5b0e6fe dropped them while adding two new rows to TESTS.md and leaving the old
rows in place, so the loss was accidental rather than the test-suite review's
doing. Only TestJobListViewIsCompact is worth restoring — the storage default
test already subsumes the other. Neither loss moved coverage; the 84.4% ->
84.0% dip is new 1.0.2 code, PeekKeepRunningInTray at 0%.

Temporary: delete once the items are done or moved to ROADMAP.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-08-06 13:19:45 +03:00
mix c8a4d31441 release: 1.0.2, tray runtime wiring and Windows notification polish 
Move post-1.0.1 changes into a 1.0.2 changelog section and restore 1.0.1
to the shipped release notes.

Co-authored-by: Cursor <cursoragent@cursor.com>
 2026-08-05 23:26:39 +03:00
mix 1e3d14bef2 Log failure-notification timing and plan faster Windows toasts. 
Append app-side delays to logs/notify-timing.log, add a PowerShell baseline
script (~773 ms), and track native WinRT toasts in ROADMAP.

Co-authored-by: Cursor <cursoragent@cursor.com>
 2026-08-05 23:15:44 +03:00
mix 0aab9d8db6 Register Windows notification icon via metadata after NewWindow. 
Fyne toasts read App.Icon without SetIcon, preserving the PE multi-size
window and taskbar icon while giving failure notifications app artwork.

Co-authored-by: Cursor <cursoragent@cursor.com>
 2026-08-05 23:02:52 +03:00
mix 0a50f3c66b Add disabled failure sample job for testing desktop notifications. 
Seed Failure notification test in defaultJobs so new installs can verify
Settings notifications via Run now without scheduler spam.

Co-authored-by: Cursor <cursoragent@cursor.com>
 2026-08-05 22:50:02 +03:00
mix 1240297cca docs: document platform layer rationale in ARCHITECTURE 
Explain why autostart, file manager, shell, and winproc are OS-specific, where compile-time vs runtime branching applies, and rules for new platform code.

Co-authored-by: Cursor <cursoragent@cursor.com>
 2026-08-05 22:46:48 +03:00
mix 5b0e6fe51b Wire KeepRunningInTray to runtime so tray, close, and autostart follow the saved setting. 
Autostart entries pass --start-in-tray only when the tray is enabled; Settings warns that the notification icon needs a restart (Fyne limitation).

Co-authored-by: Cursor <cursoragent@cursor.com>
 2026-08-05 22:44:02 +03:00
mix 5170cc5f99 release: 1.0.1, branded theme default and test-suite review 
Move post-v1.0.0 changes out of the 1.0.0 changelog section into 1.0.1,
where they belong: GoSentry theme as default, System label, About GitHub link,
Disable auto inset, README @every docs, and the completed test-suite review.

Co-authored-by: Cursor <cursoragent@cursor.com>
 2026-08-04 22:58:13 +03:00
mix a735bfd116 docs: retire the test review plan, keep its durable findings 
Every item in TEST_REVIEW_PLAN.md is done or decided, so the working
document goes as its own header instructed. What outlives it moves to
where a later reviewer will actually look:

- TESTS.md gains the -coverpkg command and the 84.4% baseline (per-package
  figures understate the suite), design principle 9 (redundancy is judged
  by comparing coverage profiles, and identical coverage alone is not
  grounds for deletion), a table of the look-alike tests that are kept
  with the reason each survives, and the list of functions deliberately
  at 0%.
- STANDARDS.md's "Intentional behavior" section points at both lists, so
  the mechanism REVIEW.md describes still reaches them.

Dropped as spent: the per-item checklists, the suggested order, and the
model-selection table.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-08-04 22:53:13 +03:00
mix 28f0a0d8e2 test: resolve the thin-test item, decline the runner merge 
Item 4 of the test-suite review:

- Delete TestEmitWithNoObserversIsNoop (no assertion; ranging a nil slice
  cannot panic) and TestStoreReturnsWiredStore (a getter returning its
  own field).
- Collapse the four TestFilteredJobIndexes* tests into one table-driven
  TestFilteredJobIndexes, matching TestFilterValue above it.
- Replace the TestMainViewBuilds smoke test with
  TestMainViewRecordStartupAddsHistoryRow, which calls the recordStartup
  closure for both wordings run.go selects between and asserts the rows
  reach the History table through its own cell callbacks. Keeps the
  unique coverage the review identified and adds the !windowShown branch.

Item 5 is declined with measurements: the three RunJob tests cost 0.14 s
combined, so merging them saves ~90 ms while forcing their three
fixtures (including the only Manual trigger) into one. The runner
package's runtime is the two timeout tests, not subprocess spawns.

go vet and go test -race pass for src/app and src/ui.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-08-04 22:46:26 +03:00
mix 2ef18e759c test: delete duplicate-coverage tests, fix TESTS.md drift, drop hand-rolled itoa 
Items 1-3 of the 2026-08-04 test-suite review: TestCleanupLogsKeepsFilesWithinAgeLimit,
TestRunDueEmptyOverlapInheritsGlobal, and TestSameWindowsPathHandlesSpaces had
byte-identical coverage to an existing test and no assertion the survivor lacked.
storage.defaultJobs, the one accidental 0% coverage gap the review found, is now
covered and TESTS.md corrected to match. seed_test.go's itoa is replaced with
strconv.FormatInt.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
 2026-08-04 22:30:27 +03:00
mix 77bd2db286 docs: recommend a model per item in the test review plan 
The deciding factor is the slow feedback loop, not task size: the ui
package needs CGO and the MSYS2 toolchain, and a cold test run took 258s
during the review. Getting an edit right on the first pass is worth more
than generating it faster.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-08-04 22:13:04 +03:00
mix 1b6a3604cf docs: add the test-suite review action plan 
Records the findings of a review of the whole test suite: three duplicate
tests confirmed by comparing coverage profiles, two inaccuracies in
TESTS.md, a hand-rolled itoa in seed_test.go, and four tests thin enough
to need a decision.

Also lists the pairs that share a coverage profile but assert different
properties, and the functions whose zero coverage is deliberate, so a
later pass does not re-report them. Temporary: delete once the items are
done or moved to ROADMAP.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-08-04 22:11:50 +03:00
mix cb37377346 Add top inset to the Disable auto row in the Jobs sidebar. 
The row sat flush against the tab bar while the VBox gap below was already one theme padding; matching that on top balances the spacing.

Co-authored-by: Cursor <cursoragent@cursor.com>
 2026-08-04 22:10:11 +03:00
mix b2402f4c72 Rename the Default theme option to System. 
Co-authored-by: Cursor <cursoragent@cursor.com>
 2026-08-04 21:49:06 +03:00
mix 648325a690 Point the About repository link at GitHub. 
The Settings About block now links to mixeme/gosentry instead of the private Gitea mirror.

Co-authored-by: Cursor <cursoragent@cursor.com>
 2026-08-04 19:35:29 +03:00
mix 27927f3ab1 docs: expand README @every schedule syntax 
Document supported Go duration units, combinations, cron alternatives for calendar intervals, the one-second tick floor, and cron descriptors.

Co-authored-by: Cursor <cursoragent@cursor.com>
 2026-08-04 19:28:42 +03:00
mix 276539c383 Make the branded GoSentry theme the default. 
Co-authored-by: Cursor <cursoragent@cursor.com>
 2026-08-04 19:18:48 +03:00
mixeme e482e3261c docs: cut GitHub releases so the push mirror cannot delete them 
GitHub is a pruning push mirror of Gitea, so a tag created by
"gh release create" belongs to no upstream ref and disappears on the next
synchronisation, orphaning the release and its archives. Document the order
that survives it: push the tag to Gitea, wait for the mirror, verify the tag
on GitHub, publish with --verify-tag.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-07-28 15:17:14 +03:00
mixeme a926e90196 docs: give "Cutting a release" its pre-tag checklist 
The section began at the tag, so everything that has to be true before the
tag exists was either implied or nowhere: the version bump was named only
as the thing the tag must match, and the changelog entry, the test run and
the push were not mentioned at all. The push matters because the tag has
to land on a commit the forge has.

The screenshots are the reason for writing this down. README.md is
packaged into all three release archives and is what the forge renders on
the project page, and nothing fails when the shots are stale — the release
just ships pictures of an older GUI. This project changes visible UI most
releases, so the default assumption should be that they need retaking.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-07-27 22:29:42 +03:00
mixeme 16cf2b9e30 docs: record the documentation pass in the 1.0.0 changelog 
Six commits landed after the 1.0.0 section was written, and none of them
appear in it. The release was never tagged or pushed, so they belong in
that section rather than in a 1.0.1 for changes no one could have run:
version.go stays at 1.0.0. This is the same call bde9a2e made for 0.16.0.

They are worth recording rather than dropping as "docs only". README.md
ships inside every release archive, and its gosentry.json sample — the one
file the user is invited to hand-edit — was wrong until this pass. The
rest is the contributor documentation catching up with the code it
describes: TESTS.md indexing 130 of 170 tests, ARCHITECTURE drawing an
edge the UI does not have, and the file-length guideline stated as settled
while six files are over it.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-07-27 22:21:08 +03:00
mixeme 0cf44e1dfa docs: spell out what a missing RELEASE_TOKEN actually does 
The note said Codeberg needs the secret but not what happens without it,
so the failure mode had to be inferred from a red job. Record it: build
and packaging still succeed, the upload step fails on authentication and
takes the job with it, and the release is published with no assets.

Not "the upload step is skipped", which is what the comment in
.forgejo/workflows/release.yml claims. That step is guarded only by
`if: github.event_name == 'release'` — there is no token check and no
continue-on-error, so an absent or unscoped token makes it fail rather
than skip. Skipping is the workflow_dispatch path. The workflow comment
is still wrong and is left for a separate change.

Also name why GitHub needs no setup: softprops/action-gh-release falls
back to the built-in GITHUB_TOKEN and the workflow grants contents:write.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-07-27 22:17:34 +03:00
mixeme 44bc7ee81e docs: say which OS each Packaging command belongs to 
The two package-* invocations sat next to each other with nothing but
the code-fence language to tell them apart, and the output paths were
pooled in one block that mixed Linux tarballs with the Windows zip.
Label each command Windows: / Linux: like Run From Source does, and give
each its own artifact list.

Also note that package-linux.sh emits the arm64 tarball only when
aarch64-linux-gnu-gcc is installed; the flat list implied a plain Linux
host always produces both.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-07-27 22:13:19 +03:00
mixeme 0f171edd75 docs: reorder DEVELOPMENT.md and give it a table of contents 
The document opened with dependency installation and buried "Run From
Source" between the build and release sections, so a newcomer met the
MSYS2 setup before learning what the stack was. Reorder it as stack and
tools, external libraries, run from source, build, release, CI, and add
a clickable two-level Contents block.

External libraries now list version, repository, and license type in one
table, and the package-* scripts are documented for the first time. The
Project Layout section is gone: it duplicated the package map in
ARCHITECTURE.md and had drifted out of date, missing
src/platform/filemanager.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-07-27 22:08:03 +03:00
mixeme 9a45a7be6f fix(ui): give the Settings Theme row back its top gap 
The Application section stacks its rows with rowOverlap(), a negative
spacing that trades away one label's duplicated text inset. The Theme
row's value is a Select, which paints its box out to the row's edge and
has no inset to give, so the overlap closed the gap instead: 0.46 px
between the Notifications checkbox and the dropdown, against ~8 px
between the checkbox rows.

cancelRowOverlap adds that one padding back on the Theme row's top edge
only, restoring the gap to 7.5 px without touching the other rows or the
column width.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-07-27 22:04:18 +03:00
mixeme 9dd461e35e docs: track the oversized files as a roadmap item 
The ~250-line guideline is currently broken by six source files, not the
two the last commit named from the ui section it was editing:
operations.go at 490 is the worst, and both files that were already split
once are back over.

Fixing them belongs in the next whole-project review rather than in
one-off commits. REVIEW.md item 2 already asks for exactly this sweep, and
doing all six together is what keeps the seams consistent — six separate
passes would settle the same question six ways. A split also reads as pure
movement while it is the easiest change in which to silently drop a
function, which is an argument for one careful pass rather than several
hurried ones.

The item records the seams that are visible today so the pass does not
start cold: operations.go splits along the three consecutive blocks it
already has, history_view.go's column measurement is pure and separable,
and jobs_view.go is the hard one because almost all of it is a single
constructor that has to be broken up rather than moved. The three files
barely over the line are flagged as re-measure-first, not split-on-sight.

ARCHITECTURE now points at that item instead of describing the overage in
passing.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-07-27 21:44:03 +03:00
mixeme 84e81371c1 docs: correct the claims that no longer match the code 
Four documents asserted things the code contradicts.

ARCHITECTURE's component diagram had the UI calling the autostart Manager
directly. It does not, and must not: src/ui holds no reference to the
package at all — Settings reads svc.AutostartStatus(), like everything else
it reads. The edge is folded into the existing ui→Service one, so the
diagram no longer draws the exception to the project's own rule.

platform/desktop was described in both ARCHITECTURE and DEVELOPMENT as a
"display-scale helper". It installs the .desktop entry and icon under XDG
data home; there is no scale helper in it.

The ~250-line file guideline was written as though the jobs_view and
settings_view splits had settled it. Both files are over it again and
history_view.go has never been split, so the guideline is now stated as
the target it is, with the current state named rather than implied.

STANDARDS pointed at a "CI coverage gate" item that ROADMAP does not have,
while omitting the two it does.

README's gosentry.json sample was three keys short of what the app writes
on first run — default_timeout_seconds, theme and job_list_view — which
made the one file the user is invited to hand-edit the least accurate
thing in the document. The sample is now the real default (verified by
marshalling DefaultConfig), with the keys explained, including why a zero
timeout is written out and an unset one is not. The per-job overrides for
overlap policy and timeout were undocumented despite being in the job
dialog, and the feature list had not caught up with the timeout, the theme,
or the compact job list.

Version numbers in example output paths are now <version>, matching how the
CI section already wrote them, so they cannot go stale again.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-07-27 17:27:21 +03:00
mixeme f11fee10e9 docs: sync TESTS.md with the suite it describes 
The document had drifted well past the point of being useful as an index:
it listed 130 tests against 170 in the tree, described four test files that
were never added to it at all (domain/config_test.go, runner/seed_test.go,
ui/layout_test.go, ui/theme_test.go), attributed runner's Windows
invocation tests to the wrong file, kept two tests that no longer exist
(TestParseRegistryRunValue, TestLinuxAutostartRemovesLegacyDesktopEntry),
and filed three activity-panel tests under jobs_view_test.go when they live
in history_view_test.go.

Most of the gap is the work of the last few releases: the per-job timeout's
three states, the persisted pause and jobs-list density, SeedStats, and the
whole GUI-geometry set the layout review produced.

Three claims were false rather than merely missing. The ui test files are
no longer "pure helpers, no Fyne widget construction" — they build views
under test.NewApp() and measure them, which is now stated as its own design
principle, because that measurement is what makes the STANDARDS rule about
theme-derived sizes enforceable. layout.go is no longer an open coverage
gap. And the coverage-gap list now names the real remaining one: Fyne's
headless driver cannot report a maximized window, which is the reason
window-size persistence is frozen.

Verified mechanically: every test function in the tree appears exactly once
in the document, under the file it actually lives in, and the document
names no test that does not exist.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-07-27 17:24:27 +03:00
mixeme bde9a2e33e release: 1.0.0, and record the details pane's width coupling 
The 0.16.0 release was never tagged or pushed, so what it described ships
as 1.0.0 instead: the changelog section is renamed rather than followed by
an empty one, and there is no 0.16.0 for anyone to have seen.

The last remainder of the layout review's F9 goes in with it. The value
column in captionValueLayout has no minimum of its own — it takes whatever
the container leaves after the caption — and what actually keeps it
readable is the 460 px minimum on commandOutputScroll, a constant that
exists for command output being legible. The dependency was invisible at
both ends; both now state it, so lowering that width is a decision rather
than an accident. The HSplit divider is the user's side of the same thing:
it is how the value column can be widened.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-07-27 17:15:19 +03:00
mixeme c5f300b670 docs: close the GUI layout review, release 0.16.0 
Stage 9 of the GUI layout plan: the roadmap item the review was raised
under is closed, so the plan and the findings document go with it — what
they established now lives in STANDARDS and the CHANGELOG.

STANDARDS gains the rule the review produced: a size that must follow the
theme is measured at build time, not written as a pixel constant, because
a hand-tuned number is only correct for the theme it was tuned against.
rowOverlap, captionColumnWidth, textColumnWidth, activityRowsHeight and
initialSplitOffset are the worked examples.

The CHANGELOG entry keeps to what the user can see: the window opens at
the size it asks for and drags smaller, the Jobs divider is draggable,
History columns hold their content on a scaled UI, and the Settings
button row and block spacing are as their layouts intended.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-07-27 16:42:20 +03:00
mixeme d0dc17a067 feat(ui): draggable divider between the jobs list and the details pane 
The jobs view pinned the sidebar in a Border left slot, so it rendered at
its MinSize and nothing else: the user could never trade list width for
detail width, and the details value column had no escape from the width
the metadata grid left it.

container.NewHSplit replaces the Border. Either pane can now be dragged,
and container.Split clamps both at their own content minimum, so the
divider degrades a pane rather than clipping it.

The initial offset is derived, not a literal: SetOffset takes a ratio,
but the sidebar's natural width is absolute (448 px), and a ratio that
fits 1024 px would hand the sidebar 700 px at 1600 px. initialSplitOffset
divides that width by the default window width less the divider, which
opens the sidebar at exactly its content width with the rest to details.

The divider position is not persisted; a restart reopens at the computed
default.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-07-27 16:40:17 +03:00
mixeme cebd41a5ac feat(ui): content-measured History columns, shared caption widths, settings_view split 
Stage 5: generalize logColumnWidth into textColumnWidth so History's
Trigger/Job/State/Detail/Log columns size from measured text instead of
pixel constants that clipped at larger text sizes (F6, F14).

Stage 6: captionColumnWidth replaces detailCaptionWidth and
settingsLabelWidth with one theme-derived helper; jobs_view_details.go
now builds its metadata rows and their width from a single
metadataRows() list instead of two hand-kept ones (F10); the Settings
button row drops its transparent-rectangle spacers for a
CustomPaddedLayout (F8); the remaining eight fyne.TextTruncate call
sites move to the non-deprecated Truncation field (N1).

Stage 7: settings_view.go split into settings_view.go (field
construction/save/load/validate), settings_view_layout.go (the
two-column layout and settingsSection/settingsRow), and
settings_view_helpers.go (fyneVersion, dialogs, path helpers),
mirroring the jobs_view.go split. Along the way, Queue/Storage's inline
VBox and Application/About's settingsSection collapse into one
settingsSection(title, spacing, rows...) constructor, and
chooseFile/chooseJSONFile merge into one function with a filter
argument.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
 2026-07-27 16:26:13 +03:00
mixeme 57e6fe410e perf(ui): sort History once per redraw, drop duplicate jobs refreshes 
Stage 4 of the GUI layout plan (F11, F12).

History: the cell callback copied and sorted the whole event list on every
call, and a full-window Refresh issues one call per visible cell — 126 sorts
of a 300-element slice per redraw, measured. The sorted snapshot now lives in
`rows`, refilled by `resort()` at build time, on a sort toggle, and from
`refresh()`. The length callback moves to `len(rows)` with it: cells and the
row count have to read the same slice, which was only incidentally true while
each cell re-derived the order for itself. The column captions become a
package-level array instead of a slice reallocated per header update, and the
per-cell `TextStyle`/`Refresh()` pair goes — the template already carries the
zero style and `SetText` refreshes.

Jobs: `refreshView()` already re-reads the service snapshot and refreshes the
list, so the six `list.Refresh()` calls that preceded it, and the duplicate
`syncFromService()` in the pause handler, were redundant. The folder filter's
early-return path never reaches `refreshView()`, so its `list.Refresh()` moves
into that branch rather than being deleted.

Both changes carry regression tests, each verified to fail against the
behaviour it guards: `TestHistorySortToggleKeepsRowsInSync` for the
cache-versus-length hazard, `TestToolbarButtonRedrawsRowAndDetails` for the
handlers that now rely on `refreshView` alone.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-07-27 14:09:51 +03:00
mixeme 60aceb75af fix: window minimum, stock spacing layout, sidebar width floor 
Part A stages 1-3 of the GUI layout cleanup plan:

- Stage 1 (F1-F3): delete settingsControlWidth's redundant wrapper (the
  Border centre slot already stretches controls), truncate the config
  path label, and name the default window size so it can be asserted
  against. Settings no longer widens the window past what it asks for.
- Stage 2 (F4-F5): drop compactVBoxLayout for the stock
  layout.NewCustomPaddedVBoxLayout and a single derived rowOverlap()
  spacing, replacing three hand-tuned spacing constants.
- Stage 3 (F7): delete the inert 400px sidebar width floor; the Border
  left slot already renders it at content MinSize.

See docs/PLAN-gui-layout.md.
 2026-07-27 13:47:39 +03:00
mixeme 9d39f5c100 docs: implementation plan for the GUI layout review findings 
Turns all fifteen findings from GUI-LAYOUT-REVIEW.md into nine staged commits,
each with the exact file changes, the tests it owes, and the measured result it
should produce.

Part A (stages 1-6) is the single-fix set: bring the window minimum under the
1024x660 the app asks for, retire compactVBoxLayout for the stock
layout.NewCustomPaddedVBoxLayout, delete the sidebar width floor, hoist the
History sort out of the per-cell callback, measure the History columns from
their content, and fold the caption widths into one theme-derived helper.

Part B (stages 7-8) is the roadmap-sized work: split settings_view.go and
replace the fixed Border sidebar with a draggable HSplit. Stage 9 closes the
ROADMAP item, adds the rule this review established to STANDARDS, and ships as
0.16.0.

Three decisions are settled and folded in: everything is in scope, so nothing
carries forward to ROADMAP; the split divider position is not persisted, which
keeps stage 8 inside src/ui; and the row spacing unifies on -8, the one
deliberate visual change in Part A.

Also records a recommended model per stage, split by judgement density rather
than diff size, plus the trap each stage carries - the History length callback
in stage 4 and the paired label change in stage 6 are the two that fail
silently.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-07-27 13:39:50 +03:00
mixeme 70aa4cbc4d docs: GUI layout review — findings for the composition pass 
Carries out the "GUI review — custom layouts and composition" roadmap item and
records the result in docs/GUI-LAYOUT-REVIEW.md. Composition only; no code was
changed. Every number was measured with a throwaway headless Fyne probe at text
size 14 and 20, not estimated.

Headline finding: the Settings tab sets a minimum content width of 1165.5 px for
a typical install — wider than the 1024x660 window run.go asks for — so Fyne
silently widens the window on open and the user cannot drag it narrower. It also
grows with the length of the config-file path (1501 px for a 75-character one).
Two independent causes: the seven settingsControlWidth wrappers, which measure
identically to bare controls at every reachable width and only inflate MinSize,
and the Config JSON path label, the one value label in the tab without
truncation. Fixing both takes the floor to 993.3.

Also found: compactVBoxLayout is a byte-for-byte re-implementation of stock
layout.NewCustomPaddedVBoxLayout (identical geometry at every spacing tested);
minJobsSidebarWidth (400) never binds because the toolbar row already needs 448;
the negative row spacings are theme.InnerPadding() written as a magic number;
the History column widths truncate their own content on a scaled UI; and the
History table re-sorts its whole event slice once per cell — 126 sorts of a
300-element copy for one redraw.

Fifteen findings in all, each with a disposition (single fix or roadmap) and a
suggested order. fixedHeightLayout, which the roadmap singled out, is kept: no
stock layout forces an exact height, and the alternative depends on the parent
staying a Border.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-07-27 03:03:50 +03:00
mixeme 721b049100 feat: select the jobs file itself in Settings 
The Jobs directory row named a folder and assumed the file inside it was
called jobs.json. It is now a Jobs file row: Browse opens a file picker
filtered to .json, the field stays editable so a file that does not exist yet
can be typed, and the job list can live under any name.

Config.JobsDir/jobs_dir becomes Config.JobsFile/jobs_file, holding the whole
path; Paths.JobsDir is derived from it so saves still create the folder. An
older gosentry.json is migrated on load by joining its jobs_dir with
jobs.json — the exact file that version used — and the retired key is dropped
when the config is rewritten. The default clears before unmarshalling, or a
file that omits jobs_file and a file that sets it would be indistinguishable
and the migration would never run.

Saving used to write the current job list over whatever was at the new path,
which made switching to an existing jobs file impossible: its contents were
destroyed. An existing file now wins. Its jobs are loaded, normalized, and
adopted, with runtimes, schedule cache, next-run times and log-seeded
statistics rebuilt around them by adoptJobsLocked — the same helper NewService
now uses, so construction and adoption cannot drift. A path with no file
behind it still receives the current jobs, which is how the file is renamed or
relocated. The new file is read before anything is written, so an unparsable
one leaves both the config and the jobs untouched.

Adoption drops every runtime, and a run finishing afterwards would write its
result onto whichever job inherited its ID, so the switch is refused while a
job is running. Unrelated settings still save during a run. Because the
replacement happens without a prompt, the Service emits JobsLoaded with the
path and count, and History carries the receipt.

A path that names only a folder (trailing separator, a dot, or two dots) is
rejected with a validation error instead of failing later with an opaque OS
error.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-07-26 23:43:56 +03:00
mixeme 5a018d03cb docs: add cron import/export and GUI layout review to the roadmap 
Two planned items larger than a single fix:

- Import/export jobs as a cron table, with the open questions that must be
  settled first: the job fields crontab has no slot for, "@every" not being
  valid crontab, splitting Command/Arguments per platform, which lines to
  skip on import, and merge semantics.
- A focused pass over the ui package's custom layouts and tuned constants —
  negative spacings that cancel widget padding, pixel sizes that ignore theme
  metrics, a layout with one call site, and settings_view.go past the size
  guideline.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-07-26 23:20:11 +03:00
mixeme e5f8c7a812 docs: changelog and version bump for 0.14.0 
Close the Unreleased section as 0.14.0 and fill the gaps in it: the Folder
caption moving onto the filter row, the padding around the Settings button
row, the Truncation-field refactor, the Docker build cache mount, and the
review/standards documents added since 0.13.0.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-07-26 23:11:31 +03:00
mixeme 5e09ba1d58 feat: open the logs folder from the Settings tab 
Reading a log file meant copying the configured path out of Settings and
pasting it into a file manager. The Logs directory row now carries an Open
button beside Browse that reveals the folder directly.

The new src/platform/filemanager package holds the platform split — explorer
on Windows, xdg-open on Linux, an "unsupported" error elsewhere — and starts
the handler without waiting on it, since Explorer exits non-zero even after it
opens the window and blocking would stall the UI thread. A missing path, a
path that is a file, and a handler that will not start are all reported to the
user; the logs directory does not exist until the first run, so that case is
reachable.

The button opens whatever the field currently holds rather than the saved
config, so an edit can be checked before Save. Resolving a relative directory
against the application folder is the store's rule, so resolveConfiguredDir is
now exported as storage.ResolveConfiguredDir instead of being duplicated in
the UI.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-07-26 23:09:33 +03:00
mixeme fe13d1f34e feat: make the Arguments placeholder state the field's rule 
The hint was a lone example path, which left the one-argument-per-line
convention to guesswork. It now names the rule and shows a flag plus a
path containing a space, so the absence of quoting is visible too.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-07-26 22:58:37 +03:00
mixeme 7aa1421639 feat: put the Folder caption on the filter row 
The caption sat on its own line above the select, costing the sidebar a full
label of height before the job list started. It now occupies the border
layout's left slot, next to the select and the view toggle, so the whole filter
is one row and the list begins a line higher.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-07-26 22:51:48 +03:00
mixeme 4d014e2f45 docs: add a review agenda and config compatibility rules 
Reviewing the project used to mean re-stating what to look at every time.
docs/REVIEW.md now holds that agenda once — nine areas, each anchored to this
codebase — and both entry points point at it rather than copying it: the
/review-project command in .claude/commands, and a section in CLAUDE.md so a
plain-language review request lands in the same place.

STANDARDS.md gains a "Config file compatibility" section. The project has
applied the same rule three times (Theme, JobListView, TimeoutSeconds) without
ever writing it down: a new Config field is omitempty and its zero value means
the previous behavior, a meaningful zero is never backfilled on load, and an
unrecognised enum value reads as the default through one shared helper. With no
migration step and hand-editable files, that is what keeps older configs working.

Also removes docs/PLAN-compact-job-list.md, implemented in edabc57 — everything
but the version bump, which now waits for the release along with the rest of
the Unreleased section. .claude/settings.local.json is ignored so the shared
command can be tracked without per-developer permissions.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-07-26 22:44:30 +03:00
mixeme 706aa8e6ba refactor: truncate job names via the non-deprecated Truncation field 
fyne.TextTruncate is deprecated in Fyne 2.7.4 in favour of the widget's
Truncation field. Behaviour is unchanged: a long job name is clipped rather
than widening the row, which is what keeps the compact row's status pinned to
the right-hand edge.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-07-26 22:44:30 +03:00
mixeme bfb982cc27 docs: add CLAUDE.md pointing at the standards document 
Agent sessions did not pick up docs/STANDARDS.md automatically. CLAUDE.md is
loaded every session, so it links the standards, architecture, and test docs,
repeats the few rules most often broken, and records the CGO/MSYS2 build
prerequisite and the commit-to-main convention.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-07-26 22:44:30 +03:00
mixeme 29ce94c3e8 feat: add a compact job list view to the Jobs tab 
Each job can now render as a single line — name on the left, status on the
right — instead of the three-line block, so many more jobs fit without
scrolling. A toggle button beside the Folder filter switches between the two
modes and is labelled with the action it performs, matching the existing
"Disable auto" convention.

The choice is persisted as Config.JobListView ("detailed" / "compact", stored
as job_list_view in gosentry.json). Empty, legacy, and unrecognised values all
normalize to detailed, so existing installs keep the current look and the file
never gains a value no reader understands.

Selection, the details panel, the folder filter, and live status updates work
unchanged in both modes.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-07-26 22:44:30 +03:00
mixeme e85cbc4eb1 feat: make per-job timeout 0 mean "no timeout" instead of inherit 
A per-job timeout now has three distinct states: unset inherits the global
default, an explicit 0 means no timeout and does not inherit, and a positive
value is the per-job limit. Job.TimeoutSeconds became *int so unset and 0 stay
distinguishable in jobs.json.

Also fixes the global default, which could not persist a 0. loadOrCreateConfig
normalized DefaultTimeoutSeconds <= 0 back to 30 on every read of an existing
gosentry.json, so "no timeout" only held until the next restart. The field is
now written unconditionally (no omitempty) and read back as-is.

Existing jobs and configs are unaffected: a job with no timeout_seconds still
inherits, and a saved global default of 30 stays 30.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-07-26 22:44:30 +03:00
mixeme 7f4f63eb8e docs: switch job list view control to a toggle button 
The plan now uses a button that flips its own text and icon (Compact +
ListIcon / Detailed + ViewFullScreenIcon), mirroring the existing
stopAllButton idiom, instead of a "View" dropdown. It sits beside the folder
filter on the same row via a border layout, so the sidebar header keeps its
current height and the toolbar row is untouched.

The label helpers become nextJobListView and viewToggleText, with tests and
the verification steps updated to match.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-07-26 21:54:20 +03:00
mixeme c58fe0d332 docs: add implementation plan for compact job list view 
Plans an opt-in one-line rendering of the Jobs tab list (name left, status
right) alongside the current three-line detailed rows, switched from a "View"
dropdown beside the Folder filter and persisted as a new Config.JobListView
field.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
 2026-07-26 20:07:06 +03:00
mixeme 88511843ce feat: add spacing around Settings tab button row 
The Save/Cancel/Defaults row sat flush against the separator above it
and the tab's left edge, tighter than the other vertical gaps in the
tab. Add matching padding spacers to bring it in line.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
 2026-07-26 14:06:30 +03:00
mixeme e87840e95b build: persist Go build cache across Docker release builds 
Mount .gocache/ from the host into the builder container so --rm
container removal no longer wipes GOCACHE between runs.
 2026-07-26 13:58:26 +03:00
mixeme 33a246cd13 feat: make global default timeout 0 (infinite) instead of required 30s 
DefaultTimeoutSeconds now means "no timeout" when 0/empty, and that is
the new default, rather than an invalid config forcing a positive
value. runner.RunJob avoids context.WithTimeout with a zero duration
(which would expire immediately) and instead runs on a plain
cancelable context when no timeout is configured. Per-job
TimeoutSeconds inherit semantics are unchanged.
 2026-07-26 13:57:03 +03:00
mixeme 3992b40eda docs: changelog and version bump for 0.13.0 
Documents the branded GoSentry theme and Settings Cancel/Defaults buttons.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
 2026-07-26 11:26:10 +03:00
mixeme 2c684532da feat: make GoSentry light theme boldly branded 
Give the light variant a soft teal window canvas with white inputs,
menus, dialogs, and buttons on top, plus teal-tinted separators, input
borders, and table headers. Cards and fields now lift off a branded
background instead of reading as a plain accent swap on gray. Text stays
dark (delegated to the base foreground) for high contrast on both the
teal canvas and the white surfaces.

Lock the teal canvas and white input background into the theme tests so
the light look cannot silently regress.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-07-26 11:26:10 +03:00
mixeme d3e3d30b42 feat: add Cancel and Defaults buttons to Settings 
Cancel discards unsaved edits by reloading the saved config; Defaults
loads built-in default values into the form for review before saving.
Extracts the default config into domain.DefaultConfig() so the store
and settings UI share one source of truth.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
 2026-07-26 11:26:10 +03:00
mixeme 84212764e4 feat: selectable branded GoSentry color theme 
Add a custom Fyne theme derived from the logo and app icon (deep teal
primary, amber accent, branded job-status colors) with light and dark
variants, and let the user choose between it and Fyne's default theme
from Settings. The dark variant uses deep-teal surfaces to echo the app
icon.

The choice is persisted as a new Config.Theme field ("default" /
"gosentry"), applied at startup before the first frame and live-previewed
when picked in Settings. Empty/legacy configs normalize to the default
theme so existing installs keep the original look.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-07-26 11:26:09 +03:00
mixeme eedae3b9f0 docs: use concrete mixeme/gosentry coordinates in update-check item 
Replace the <owner>/<repo> placeholders with the actual GitHub release repo
now that it's known.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-07-25 23:40:23 +03:00
mixeme bfd9991a3a docs: roadmap item for GitHub release update check 
Plan a best-effort, opt-in check that compares app.Version against the
latest published GitHub Release and surfaces an "Update available" hint in
Settings — detection and notification only, no auto-download.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-07-25 23:39:54 +03:00
mixeme 2ab5f07c7c docs: remove implemented per-job timeout plan 
The per-job command timeout is now shipped (0.12.0); its ROADMAP entry is
gone, so the implementation plan is no longer needed.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-07-25 23:38:59 +03:00
mixeme 48faddb3bd feat: per-job command timeout with global default 
Add an optional per-job run timeout following the overlap_policy inherit
pattern: Job.TimeoutSeconds (0 = inherit) resolves against a new
Config.DefaultTimeoutSeconds (default 30s), replacing the hard-coded 30s
guard in runner.RunJob.

- domain/storage: new fields, default 30, load-time normalization
- runner: RunJob takes an explicit timeout; StartOnly stays untimed so it
  keeps measuring launch latency only
- app: effectiveTimeout resolves under mu into runEnv, threaded to runJob;
  seam signature and validation updated; DisplayTimeout helper
- ui: Timeout entry in the job dialog, Default timeout in Settings, and a
  Timeout row in the details panel
- tests + docs (ARCHITECTURE, STANDARDS, ROADMAP, CHANGELOG) updated;
  version bumped to 0.12.0

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-07-25 23:24:50 +03:00
mixeme f4221f6ce4 docs: clarify supported platforms (Windows/Linux; macOS unsupported) 
Add a Platforms section to the README stating that autostart and desktop
integration are implemented only on Windows and Linux; macOS may build the
GUI but those features are stubbed. Avoids over-promising ahead of 1.0.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-07-25 23:12:34 +03:00
mixeme b3eb429fa6 docs: add per-job timeout implementation plan 
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-07-25 23:05:29 +03:00
mixeme 40b609a7d4 docs: add logo to README header 
Theme-aware <picture> swaps the dark wordmark variant under
prefers-color-scheme: dark so it stays legible on GitHub's dark theme.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-07-24 23:59:05 +03:00
mixeme 3a68c705c6 assets: add GoSentry wordmark logo (clock-dial variant) 
Recommended variant from gosentry-logo.html: Space Grotesk SemiBold with
an amber "G", a clock-dial "o" (ring + hands), and petrol "Sentry". Ships
self-contained SVGs (glyphs outlined to paths, no font dependency) in
light/dark/mono plus transparent PNGs at 256-2048px, with a README and the
gen_logo.py/raster.py generators for reproducibility.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-07-24 23:51:38 +03:00
mixeme 5d662c7fd5 ci: trigger release build on published release instead of tag push 
Both workflows now run on `release: published` and attach the built
archives to the release the user creates, rather than pushing a tag and
having the workflow create the release. Tag comes from the release event;
GitHub no longer regenerates release notes. Docs updated accordingly.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-07-24 15:39:59 +03:00
mix d4ca38b45a Create gosentry-logo.html 2026-07-18 14:28:20 +03:00
mixeme 48622a99c2 ci: install Node.js in Codeberg container before JS actions 
The golang:1.22-bookworm container has no node binary and Codeberg's
runner does not inject one, so checkout/forgejo-release failed with
'node: not found'. Add a pre-checkout run step (which executes via the
container shell and needs no node itself) to apt-install nodejs before
the JS-based actions run.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-07-08 08:58:40 +03:00
mixeme 9866673bab ci: use codeberg-medium-lazy runner tag for Forgejo release build 
Codeberg's hosted runners are tagged codeberg-tiny/small/medium (+ -lazy),
not 'docker', so the job was never picked up ('No active runner with tag
docker'). The three CGO cross-compiles exceed the non-lazy 10 min cap, so
use the medium -lazy runner, which relaxes the wall-clock limit.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-07-08 08:50:38 +03:00
mixeme 2f965166ba ci: add GitHub and Codeberg release build workflows 
Add tag-triggered CI that builds and publishes the linux/amd64,
linux/arm64, and windows/amd64 release binaries on both forges.

- scripts/ci-build-release.sh: shared, Docker-free build+package for all
  three targets (Windows cross-compiled via MinGW), reused by both
  workflows so the build logic lives in one place.
- .github/workflows/release.yml: GitHub Actions, publishes via
  softprops/action-gh-release using the built-in token.
- .forgejo/workflows/release.yml: Forgejo Actions for Codeberg, publishes
  via forgejo-release using a RELEASE_TOKEN secret.
- .gitattributes: force LF on workflow YAML so bash run: blocks don't
  break on Linux runners.
- docs/DEVELOPMENT.md: document the tag -> release flow and token setup.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-07-08 08:32:07 +03:00
mixeme e9ec48bf15 docs: remove <br/> from mermaid labels to fix Gitea rendering 
The prior fix switched \n to <br/> in node labels, but Gitea's mermaid
renderer still emits unclosed <br> tags in the generated SVG regardless
of source syntax. Use single-line labels instead to avoid <br> entirely.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
 2026-07-08 08:09:22 +03:00
mixeme 2c38941f6e docs: fix mermaid diagram XML parse error in Gitea rendering 
Gitea's SVG renderer requires well-formed XML; mermaid's \n line
breaks produce unclosed <br> tags in foreignObject labels. Use
explicit <br/> instead.
 2026-07-08 07:49:22 +03:00
mixeme effd740e45 docs: add descriptions and missing docs to README documentation list 2026-07-08 07:43:07 +03:00
mixeme 8bd50d0431 docs: credit Claude Code in development assistance note 2026-07-01 23:24:40 +03:00
mixeme 5c89d5ccf1 Update ROADMAP.md 2026-07-01 23:20:13 +03:00
mixeme 9216f01bf6 release: bump version to 0.11.5 
Replace interim FUTURE_WORK.md with slim STANDARDS.md and update doc links.

Co-authored-by: Cursor <cursoragent@cursor.com>
 2026-07-01 23:16:24 +03:00
mixeme aed83b91b9 docs: add FUTURE_WORK quality standard and close polish gaps 
Replace CODE_REVIEW.md with a living maturity checklist, document
session-only History, inject Service into newMainView for testability,
add UI and scheduler regression tests, and fix RunNow error surfacing
plus empty jobs view handling.

Co-authored-by: Cursor <cursoragent@cursor.com>
 2026-07-01 23:14:09 +03:00
mixeme eba7bff17a release: bump version to 0.11.4 
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-06-30 00:05:47 +03:00
mixeme 6ea6578acb feat: record launch latency in statistics for start-only jobs 
StartOnly jobs previously forced DurationMS to 0 because GoSentry does
not wait for the process to exit, leaving the Statistics line stuck at
"last 0 ms, avg 0 ms". The runner already measures launch latency (time
to spawn the process) for the History detail; this now returns that
value as the run duration so the existing duration-driven stats pipeline
folds it into last/avg/max.

Sub-millisecond launches still round to 0 and are excluded from the
average, matching prior behavior.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-06-30 00:05:17 +03:00
mixeme 00991f24a5 release: bump version to 0.11.3 
Document the code-review reliability fixes in CHANGELOG.md.

Co-authored-by: Cursor <cursoragent@cursor.com>
 2026-06-29 21:56:38 +03:00
mixeme 29d2ffed8f fix: complete code review follow-ups for queue, stats, and docs 
Replace overlap Pending flag with PendingRuns counter, match seed stats
by job_id, align average duration with TimedRunCount, and tidy docs.

Co-authored-by: Cursor <cursoragent@cursor.com>
 2026-06-29 21:54:44 +03:00
mixeme e9fc9eaba0 fix: harden run persistence and error surfacing from code review 
Snapshot store paths under lock before async runs, roll back failed
start/save state, emit UI events only after successful persistence,
surface log write failures, and sync stale YAML docs to JSON.

Co-authored-by: Cursor <cursoragent@cursor.com>
 2026-06-29 21:33:50 +03:00
mixeme 09c5edc993 docs: document disadvantages of platform-specific maximized detection 
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-06-25 23:28:40 +03:00
mixeme 76c8ac92d1 freeze window size persistence until maximized detection is available 
Saving w.Canvas().Size() when the window is maximized persists the maximized
dimensions, corrupting the stored size for the next launch. Commented out the
save calls until per-OS maximized detection (IsZoomed / _NET_WM_STATE /
NSWindow.isZoomed) is implemented. Roadmap entry updated to reflect frozen
status.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-06-25 23:26:35 +03:00
mixeme dccb598b8c docs: add roadmap item for window size not saved when maximized 
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-06-25 23:22:22 +03:00
mixeme 0c1ab8dd7e Update README.md 2026-06-25 23:00:58 +03:00
mixeme dda128ff85 Update README.md 2026-06-25 22:59:29 +03:00
mixeme 7ef00a1139 Update README.md 2026-06-25 22:58:14 +03:00
mixeme 34a702bc42 docs: add screenshots to README 
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-06-25 22:56:04 +03:00
mixeme 74e9e93bd7 Add screenshots 2026-06-25 22:55:06 +03:00
mixeme 882fcfe65d chore: release 0.11.2 with window persistence, appID update, and doc fixes 
- Persist window size on quit/close and restore it on next launch
- Update appID from ru.mixdep.gosentry.desktop to ru.mixeme.gosentry.desktop
- Use markdown headers for Build sections in DEVELOPMENT.md
- Remove stale go.yaml.in/yaml/v4 dependency from DEVELOPMENT.md

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-06-25 22:50:28 +03:00
mixeme 8cfa16a2bd docs: add History column filters to roadmap (pending Fyne support) 
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-06-25 22:36:03 +03:00
mixeme 5f36c7a0e1 feat(ui): rename pause/resume all to Disable/Enable auto with pause icon 
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-06-25 22:30:30 +03:00
mixeme fb2f9b6e30 fix(ui): restore History column sort after Fyne 2.7 header-tap change 
Fyne 2.7.4 made Table.Select() reject cells with Row < 0, so OnSelected
was never fired for header clicks and the Time sort toggle stopped working.
Replace the plain Label header with a custom historyHeader widget that
implements fyne.Tappable; UpdateHeader wires OnTapped for col 0 directly.
Also swap "asc"/"desc" text for ▲/▼ glyphs.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-06-25 22:24:59 +03:00
mixeme 0e258979d9 chore: release 0.11.1 with settings spacing, label, and Save-button fixes 
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-06-25 08:50:10 +03:00
mixeme f53447d3e8 feat(ui): align settings spacing, fix label clipping, gate Save button 
- Give the Queue selects the same default spacing as the Storage fields
- Widen the settings caption column so "Default overlap policy" fits
- Disable Save until a field differs from the saved config, re-enabling on
  change and re-disabling after a successful save

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-06-25 08:49:03 +03:00
mixeme 24a8140e26 chore: release 0.11.0 with paused manual runs and two-column layouts 
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-06-25 07:52:10 +03:00
mixeme 9ecb8b61f8 feat(ui): two-column settings/details, compact job list, manual run while paused 
- Allow manual "Run now" while the scheduler is paused: pause now stops only
  automatic scheduled runs (RunDue), not the user's explicit action. Drop the
  paused guard in Service.RunNow and the UI pause dialog; update tests.
- Cap the details metadata caption width via a new captionValueLayout so a wider
  window feeds extra space to the value column instead of the short caption.
- Reorganize the Settings tab into two columns (Application+Queue / Storage+About)
  with Save spanning the full width; move the Autostart status onto its own line.
- Condense the Jobs list rows with compactVBoxLayout to fit more jobs.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-06-25 07:51:03 +03:00
mixeme 43809e5076 fix(ui): refresh activity panel when switching selected job 
The "Selected job activity" list kept showing the previous job's entries
when a different job was selected. dp.update() reassigned the backing
slice but never refreshed the widget.List, and only the refreshView path
appended an explicit refresh. Move d.logs.Refresh() into update()/clear()
so every caller redraws the panel.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-06-25 07:34:19 +03:00
mixeme 8b81180c92 chore: release 0.10.2 with condensed panels and settings spacing fix 
Bump version to 0.10.2 and document the UI density/resizing work in the
changelog. Also restructure the settings form into sections so separators
and the editable Storage fields keep normal spacing (dividers no longer
crowd the row above, entry boxes stay visibly separated) while the
label-only sections remain condensed.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-06-25 01:41:02 +03:00
mixeme 21d78ea010 feat(ui): condense panels and let the window shrink to 720p 
Make the job details and settings views more compact and remove the tall
minimum that prevented resizing the window shorter:

- Lay job metadata out in two columns and stack rows with a negative-gap
  compactVBoxLayout, roughly halving the block height.
- Wrap the settings form in a vertical scroll so it no longer dictates
  the window minimum (AppTabs sizes to the tallest tab), and tighten its
  rows with the same compact layout.
- Shrink the command-output scroll minimum height so the details pane can
  get shorter; long output still scrolls.
- Size the "Selected job activity" panel to exactly maxJobActivityRows
  using widget.List's own content-height formula, so all three rows show
  without a scrollbar regardless of theme or DPI.

Together these drop the minimum window height from ~891px to ~570px.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-06-25 01:34:47 +03:00
mixeme 5cdb9414b2 docs: update changelog for 0.10.1 build script improvements 
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
 2026-06-24 23:05:22 +03:00
mixeme 9394bd66b8 chore: add informative messages to Windows build script 
Add echo statements at key build steps to indicate progress:
- Build start and version info
- Output path
- Environment setup
- Icon resource embedding (or warning if windres not found)
- Go compilation
- Success completion message

Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
 2026-06-24 23:04:42 +03:00
mixeme ec19ab3884 chore: bump version to 0.10.1 and update changelog 
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
 2026-06-24 23:02:45 +03:00
mixeme 999ccb7300 refactor: unify icon asset naming to use size-based scheme 
Rename icon files from mixed naming (big/16x16) to consistent size-based
names (large/small) for clarity. Update Go functions and variables to
reference the new asset names. This makes the icon pipeline easier to
understand and maintain.

File changes:
- gosentry-icon-big.png → gosentry-icon-large.png
- gosentry-icon-16x16.png → gosentry-icon-small.png
- gosentry-icon-16x16.ico → gosentry-icon-small.ico
- Embedded variable: iconBytes → iconLargeBytes for clarity

Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
 2026-06-24 23:02:06 +03:00
mixeme 88989b143b docs/CHANGELOG: complete the 0.10.0 entry 
Document the shipped work missing from the entry: per-job overlap
policy, persisted global pause, 720p-safe window sizing, portable
packaging helpers, and the internal cleanup (jobs_view split, dropped
YAML migration, planning-doc removal).

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-06-24 22:59:00 +03:00
mixeme 03cba5b5aa docs: drop completed release-milestone docs; trim roadmap 
Remove RELEASE-0.10-PLAN.md and RELEASE-0.10-TASKS.md now that the
0.10.0 milestone work is finished (history preserved in git). Trim
ROADMAP.md to open items only; completed work lives in CHANGELOG.md.
Version stays 0.10.0 — this release is not yet tagged/shipped.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-06-24 22:57:15 +03:00
mixeme 74cd7485ee docs: mark Release 0.10.0 complete; update roadmap (T8.1) 
ROADMAP.md now documents that T6.1 (jobs_view split), T6.2 (cleanup),
and T7.1–T7.2 (Windows zip + Linux tar.gz packaging) are complete.
Version 0.10.0 and CHANGELOG.md were already finalized.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-06-24 22:51:03 +03:00
mixeme 1085667d7b scripts: add portable packaging helpers for Windows and Linux (T7.1-T7.2) 
package-windows.bat builds gosentry.exe then bundles it with README and
CHANGELOG into a versioned .zip via PowerShell Compress-Archive.
package-linux.sh does the same for linux-amd64 and linux-arm64 (arm64
cross-compiles via aarch64-linux-gnu-gcc; skips gracefully if absent),
producing .tar.gz archives with files at the archive root.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-06-24 22:50:06 +03:00
mixeme 13f2779e1f refactor: split jobs_view, drop YAML migration, update docs (T6.1-T6.4) 
T6.1: split jobs_view.go into three files — jobs_view_helpers.go (pure
helpers) and jobs_view_details.go (detailsPanel struct with widget
creation, update, clear, and container methods) — bringing jobs_view.go
from 459 to ~200 lines.

T6.2: remove stale YAML upgrade note from README; drop *.yaml from
.dockerignore.

T6.3: delete YAML shadow structs (yamlConfig/yamlJob/yamlJobsFile),
importYAMLConfig/importYAMLJobs, legacy path constants, and all
YAML-import tests; run go mod tidy to remove go.yaml.in/yaml/v4.

T6.4: refresh ARCHITECTURE.md — JSON storage references, new Key Domain
Concepts section (per-job overlap policy, run-time statistics + log
seeding, persisted pause flag, jobs_view split).

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-06-24 22:42:42 +03:00
mixeme d09b6e182c ui: 720p-safe default window size + tighter layout minimums (T5.1) 
Lower default from 1120×720 to 1024×660 so the window opens fully
visible on 1366×768 / 720p screens. Reduce minJobsSidebarWidth (480→400)
and commandOutputScroll min size (520×160→460×120) to match; the layout
engine enforces these as the natural minimum, keeping the UI usable at
the smaller default.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-06-24 22:26:34 +03:00
mixeme 18dd9aeabb docs: mark Phase 4 tasks complete (T4.1–T4.4) 2026-06-24 22:23:24 +03:00
mixeme 80d13d0ac6 app/operations_test.go: persist-pause + rebuilt-service tests (T4.4) 
TestSetGlobalPausePersistsToConfigFile reads gosentry.json back from disk
after each SetGlobalPause call and asserts the Paused flag is correctly
written and cleared. TestServiceRebuiltFromPausedStoreStartsPaused builds
a second Service from the already-updated store and confirms both RunDue
and RunNow are refused while the service is paused.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-06-24 22:21:24 +03:00
mixeme 7e868d6f5b ui/jobs_view: init pause controls from persisted state (T4.3) 
schedulerPaused, the scheduler-state label, and the Pause-all/Resume-all
button now read Config.Paused at construction time so they correctly reflect
a paused install on restart instead of always starting in the running state.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-06-24 22:18:36 +03:00
mixeme b9505e83ab domain/config.go + app: persist global pause state across restarts (T4.1, T4.2) 
Add Config.Paused bool so the scheduler's paused flag survives a restart.
SetGlobalPause now writes the flag into store.Config and calls SaveConfig;
NewService seeds s.paused from Config.Paused before computing first next-run
times, so jobs show "Scheduler paused" immediately at startup when paused.
Also add Paused to the yamlConfig shadow struct to keep the direct conversion
from domain.Config valid until the YAML import path is dropped in T6.3.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-06-24 22:16:43 +03:00
mixeme b0d9883627 app/run_test.go: per-job overlap policy override tests (T3.4) 
Adds three tests for the effective-policy resolution:
- per-job "queue" overrides global "skip" (job marked Pending, re-runs)
- per-job "skip" overrides global "queue" (overlap dropped, no re-run)
- empty Job.OverlapPolicy inherits the global default

Also ticks Phase 3 complete in docs/RELEASE-0.10-TASKS.md.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-06-24 21:33:06 +03:00
mixeme 554ce2b93a ui/app: per-job overlap policy in job dialog and details panel 
- job_dialog.go: add overlap-policy widget.Select with "(Use global
  default)" → empty, "skip", and "queue" options; pre-selects the job's
  current value; on save maps the inherit label back to empty string.
- app/format.go: add DisplayOverlapPolicy(job, globalPolicy) — returns
  the policy name when overridden, else "skip/queue (global default)".
- ui/jobs_view.go: add "Overlap policy" detail row updated in
  updateDetails using DisplayOverlapPolicy.
- settings_view.go: rename "Overlap policy" label to "Default overlap
  policy" to clarify it is the global default jobs can override.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-06-24 21:05:50 +03:00
mixeme 3f3b977fb0 app/run.go: resolve effective overlap policy per job in RunDue 
RunDue now resolves each job's effective overlap policy via
effectiveOverlapPolicy (job value when set, else Config.OverlapPolicy)
instead of reading the global policy once per tick. An empty
Job.OverlapPolicy inherits the global default, so normalizeJobs continues
to leave the field untouched rather than backfilling it.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-06-24 20:58:51 +03:00
mixeme 8f75318e8c domain/job.go: add OverlapPolicy field for per-job run policy 
Adds OverlapPolicy field to Job struct with json:"overlap_policy,omitempty"
tag. When empty, the field signals that the job should inherit the global
overlap policy setting from Config. Also updates yamlJob shadow struct to
maintain field-layout equivalence for YAML→JSON import compatibility.

Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
 2026-06-24 20:57:00 +03:00
mixeme ed81443d29 ui/history_view: size Log column to content so file names aren't truncated 
The Log column was fixed at 240px with TextTruncate, clipping log file
names like 20260601-100000_<JobName>.log. Measure the widest value and
size the column to fit (bounded 240–520px), recomputing on refresh so
newly recorded events widen the column instead of being cut off.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-06-24 20:54:23 +03:00
mixeme cf276fc8ec ui/jobs_view: cap Selected job activity to 3 recent rows, anchor at bottom 
Show only the latest 3 activity entries for the selected job instead of the
full in-memory list, and pin the panel to the bottom of the details pane via a
Border so the command output absorbs the remaining vertical space.

Adds fixedHeightLayout (mirroring minWidthLayout) to reserve a stable height
for the activity list. The full per-job history (maxJobLogs) is untouched and
still available in the History view.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-06-24 20:36:41 +03:00
mixeme 07c0995935 Update .gitignore 2026-06-24 08:32:18 +03:00
mixeme d13b90061c docs/RELEASE-0.10-TASKS: unmark T8.1 (ROADMAP + PERFORMANCE pending) 
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-06-24 08:27:12 +03:00
mixeme 65281c3996 docs/RELEASE-0.10-TASKS: mark T2.5 and T8.1 complete 
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-06-24 08:26:40 +03:00
mixeme b45ab654c2 app/version, docs/CHANGELOG: bump to 0.10.0 (T8.1) 
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-06-24 08:26:03 +03:00
mixeme 886d0d9caa app/format, ui/jobs_view: DisplayStats summary + Statistics detail row (T2.6, T2.7) 
Add DisplayStats to format.go: returns "No runs recorded" when RunCount is
zero, otherwise a one-line "N runs, M failed, last X ms, avg Y ms, max Z ms"
summary.  Wire a Statistics detail row into the jobs panel that refreshes via
updateDetails alongside the other runtime fields.

Tests: TestDisplayStats (nil/zero/normal/no-fail), TestUpdateStats (three
sequential fake runs through updateStats verifying all aggregate fields), and
five seed tests in runner/seed_test.go covering basic aggregation,
duration-less legacy logs, maxFiles capping, missing directory, and
unmatched log files.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-06-24 08:24:48 +03:00
mixeme 6c69f323bd runner/seed, app/service: seed run-time stats from log files (T2.5) 
Add SeedStats, which reconstructs per-job execution-time aggregates from
existing log files: suffix-matched by sanitized job name, bounded by
MaxLogFiles, and tolerant of duration-less legacy logs (counted in
run/fail totals but excluded from last/avg/max). NewService folds the
seed into each JobRuntime at build time so stats survive a restart.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-06-24 08:16:47 +03:00
mixeme 7dafa82b21 domain/runtime, app/run: add execution-time statistics aggregate (T2.4) 
Add RunCount, FailCount, LastDurationMS, AvgDurationMS, MaxDurationMS
to JobRuntime and fold each completed RunRecord into them via updateStats
called from executeRun.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-06-24 08:13:02 +03:00
mixeme 2b0cdb57f4 runner/logfile: write duration line to log header (T2.3) 
Pass durationMS to writeRunLog and include it as 'duration' in the
log header for persistence.

Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
 2026-06-24 08:11:05 +03:00
mixeme 42d73b9eb0 domain/record, runner: add DurationMS to RunRecord (T2.1, T2.2) 
Add DurationMS int64 field to RunRecord and measure wall-clock
start→finish in RunJob; StartOnly jobs record 0.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-06-24 08:09:59 +03:00
mixeme 183ea1b125 docs/RELEASE-0.10-TASKS: mark Phase 1 complete (T1.1-T1.4) 2026-06-24 07:55:55 +03:00
mixeme 61ea3ce2af app/format_test: add EventLine test cases (T1.4) 
Cover the compact formatter with three scenarios:
- Log file present: shows base name only (not full path)
- Log file absent: formats without a log column
- Empty trigger: defaults to "Unknown"

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-06-24 07:52:53 +03:00
mixeme 0f27d75359 ui/jobs_view: render job logs as compact one-line entries (T1.2) 
Switch the jobLogs list template to TextTruncate wrapping and use
EventLine (base log filename only) instead of EventText so each
activity row stays on a single line in the jobs panel.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-06-24 07:50:03 +03:00
mixeme 8fc28f592d app/format: add EventLine compact formatter (T1.1) 
Uses filepath.Base for the log file so the jobs log view can show
one-line entries without the full directory path cluttering the row.
EventText is kept intact for the History table.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-06-24 07:49:26 +03:00
mixeme adb119973a Add persisted Pause-all state to 0.10.0 plan and tasks 
New feature section: store the global pause in Config so "Pause all"
survives restarts (config field, persist in SetGlobalPause, init service
and UI from it). Renumber the later plan sections and task phases to fit.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-06-24 01:04:29 +03:00
mixeme 4226cb6141 Add 0.10.0 task list with model and thinking depth 
Execution checklist for RELEASE-0.10-PLAN.md: 7 phases of tasks each
tagged with recommended model and thinking depth, plus a completion
checklist and definition of done.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-06-24 00:53:42 +03:00
mixeme bf9c1517a5 Add YAML->JSON migration cleanup to 0.10.0 plan 
Section 6 now includes dropping the one-time YAML import that shipped in
0.9.0: the shadow structs and import path in storage, the legacy path
names, the go.yaml.in/yaml/v4 dependency, the import tests, and the
*.yaml ignore rules.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-06-24 00:51:51 +03:00
mixeme 55e90d80d3 Refine 0.10.0 plan: keep startup timing, add architecture-doc update 
Section 6 now preserves the startup-timing instrumentation through the
post-field-test cleanup and adds a task to refresh docs/ARCHITECTURE.md
for the per-job overlap policy, run-time statistics, and jobs_view split.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-06-24 00:49:40 +03:00
mixeme 20390fe476 Add 0.10.0 milestone plan; trim ROADMAP to portable packaging 
Add docs/RELEASE-0.10-PLAN.md covering the open roadmap follow-ups plus
per-job overlap policy, run-time statistics, one-line activity entries,
log-name fix, and 720p window sizing. Drop the non-portable delivery
formats (.deb, installer, AppImage, Flatpak, winget) from ROADMAP.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-06-24 00:46:23 +03:00
mixeme 67cf4e1c11 Create RELEASE-0.10-PLAN.md 2026-06-24 00:43:24 +03:00
mixeme 93b363d802 Remove completed items from ROADMAP 
Drop the resolved Tray Interaction section (0.9.0) and the completed
run.go split note; keep pending follow-ups, cleanup, and packaging.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-06-24 00:36:25 +03:00
mixeme 41e2089142 Remove completed pre-release planning docs 
All 8 phases of the pre-release milestone are done and committed; the
plan and task checklist are no longer needed.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
 2026-06-24 00:33:51 +03:00
mixeme dafd8ef345 P8.3: update CHANGELOG and ROADMAP for 0.9.0 release 
CHANGELOG:
- Expand 0.9.0 entry to cover all pre-release work: JSON storage
  migration, exit-code removal, PySentry legacy cleanup, queue execution
  modes/overlap policies, failure notifications, Command browse button,
  developer docs split, icons, tray left-click, Fyne 2.7.4 upgrade.

ROADMAP:
- Remove resolved "Linux test build broken" item (fixed in P7.1).
- Note that app/run.go was created to split dispatch logic.
- Mark "Tray Interaction" section as resolved in 0.9.0; document the
  SetSystemTrayWindow implementation and re-measured startup time
  improvement (−36%).

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-06-24 00:30:34 +03:00
mixeme 2e54d088bf P8.2: rewrite README.md for end users 
- Update Features to reflect JSON storage, queue execution mode/overlap
  policy, failure notifications, and tray left-click-to-show.
- Replace Documentation project-notes list with a proper Documentation section.
- Rewrite Storage section: JSON file examples with all current fields
  (execution_mode, overlap_policy); add YAML upgrade note.
- Add Queue Settings section documenting parallel/sequential and skip/queue.
- Add Notifications section.
- Fix all 0.3.0 version strings to 0.9.0.
- Remove Codex attribution line.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-06-24 00:28:49 +03:00
mixeme 2b636cbb65 P8.1: extract developer docs into docs/DEVELOPMENT.md 
Move Requirements, Build, Run From Source, Project Layout, and
Dependencies/mirroring out of README into docs/DEVELOPMENT.md. Update
version references to 0.9.0 and correct the storage description to JSON.
README retains user-facing sections and gains a Development link.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-06-24 00:26:36 +03:00
mixeme 3907ab3c18 P7.1: move Windows-only runner tests into runner_windows_test.go 
Tests touching SysProcAttr.HideWindow/CmdLine and windowsShellCommandLine
are guarded by //go:build windows; runner_test.go drops the winproc import.
Linux cross-compile and Windows test run both clean.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-06-24 00:23:25 +03:00
117 changed files with 10329 additions and 2081 deletions
Expand all files Collapse all files
.dockerignore
-1
View File
@@ -4,5 +4,4 @@ dist
logs logs
gosentry.json gosentry.json
jobs.json jobs.json
*.yaml
*.exe *.exe
.forgejo/workflows/release.yml
+108
View File
@@ -0,0 +1,108 @@
name: Release
# Forgejo Actions workflow for Codeberg. It mirrors .github/workflows/release.yml
# and reuses the same scripts/ci-build-release.sh, so the actual build/package
# commands live in exactly one place. Codeberg has no Windows runners, but the
# Windows binary is cross-compiled with MinGW-w64 from the Linux job, so a single
# golang:1.22-bookworm container produces all three artifacts.
#
# Publishing needs a token that can write releases. Add a repository secret named
# RELEASE_TOKEN (a Codeberg access token with the "write:repository" scope) under
# Settings -> Actions -> Secrets. Without it the build still runs; only the
# upload step is skipped.
on:
release:
types: [published]
workflow_dispatch:
jobs:
release:
# Codeberg's hosted runners are tagged codeberg-tiny/small/medium (+ -lazy);
# there is no "docker" tag. The non-lazy runners cap at 2/5/10 min, which the
# three CGO cross-compiles blow past, so use the medium *-lazy* runner, which
# relaxes the wall-clock limit (it aims to finish within 24h).
runs-on: codeberg-medium-lazy
container:
image: golang:1.22-bookworm
steps:
- name: Provide Node.js for JS actions
# golang:1.22-bookworm ships no Node, and Codeberg's runner does not
# inject one, so JS actions (checkout, forgejo-release) fail with
# "node: not found". A run step executes through the container shell and
# needs no Node itself, so it can install Node before those actions run.
# (If a "node version" error ever appears, swap Debian's nodejs 18 for a
# NodeSource node 20 install.)
run: |
apt-get update
apt-get install -y --no-install-recommends nodejs
command -v node || ln -s "$(command -v nodejs)" /usr/local/bin/node
- name: Checkout
uses: https://code.forgejo.org/actions/checkout@v4
- name: Install cross toolchain
# Same package list as the repo Dockerfile / GitHub workflow: native gcc
# plus X11/GL headers, the aarch64 cross compiler with arm64 runtime
# libs, MinGW-w64 for the Windows GUI binary, and zip for packaging.
run: |
dpkg --add-architecture arm64
apt-get update
apt-get install -y --no-install-recommends \
ca-certificates \
gcc \
libc6-dev \
gcc-aarch64-linux-gnu \
libc6-dev-arm64-cross \
linux-libc-dev-arm64-cross \
gcc-mingw-w64-x86-64 \
binutils-mingw-w64-x86-64 \
pkg-config \
libgl1-mesa-dev \
xorg-dev \
libgl1-mesa-dev:arm64 \
libx11-dev:arm64 \
libxcursor-dev:arm64 \
libxrandr-dev:arm64 \
libxinerama-dev:arm64 \
libxi-dev:arm64 \
libxxf86vm-dev:arm64 \
zip
rm -rf /var/lib/apt/lists/*
- name: Derive version
# On a release, strip the leading "v" so artifact names and the injected
# app version match the release tag (the release event still sets
# GITHUB_REF_TYPE=tag / GITHUB_REF_NAME=<tag>).
id: version
run: |
if [ "${GITHUB_REF_TYPE:-}" = "tag" ]; then
echo "value=${GITHUB_REF_NAME#v}" >> "$GITHUB_OUTPUT"
fi
- name: Build and package
env:
VERSION: ${{ steps.version.outputs.value }}
run: |
chmod +x scripts/ci-build-release.sh
scripts/ci-build-release.sh
- name: Collect release files
# forgejo-release uploads every file in a single directory, so gather the
# archives into one flat folder.
run: |
mkdir -p dist/release
cp dist/linux/*.tar.gz dist/windows/*.zip dist/release/
- name: Attach assets to release
# Only runs for the release event; the release already exists, so this
# uploads the built archives to it. Skipped on workflow_dispatch.
if: ${{ github.event_name == 'release' }}
uses: https://code.forgejo.org/actions/forgejo-release@v2
with:
direction: upload
url: https://codeberg.org
repo: ${{ github.repository }}
tag: ${{ github.event.release.tag_name }}
release-dir: dist/release
token: ${{ secrets.RELEASE_TOKEN }}
override: true
.gitattributes
+5
View File
@@ -1,3 +1,8 @@
# Keep shell scripts LF even on Windows checkouts so bash on Linux hosts # Keep shell scripts LF even on Windows checkouts so bash on Linux hosts
# doesn't choke on trailing CRs (e.g. "set: pipefail: invalid parameter name"). # doesn't choke on trailing CRs (e.g. "set: pipefail: invalid parameter name").
*.sh text eol=lf *.sh text eol=lf
# CI workflow YAML embeds shell in `run:` blocks that Linux runners execute with
# bash, so keep these LF for the same reason as the shell scripts above.
.github/workflows/*.yml text eol=lf
.forgejo/workflows/*.yml text eol=lf
.github/workflows/release.yml
+96
View File
@@ -0,0 +1,96 @@
name: Release
# Build the Linux (amd64/arm64) and Windows (amd64) binaries whenever a GitHub
# Release is published, then attach the packaged archives to that release.
#
# Everything runs inside golang:1.22-bookworm — the same base image as the
# repo Dockerfile — so the CGO/Fyne toolchain matches the local release builds.
# The Windows binary is cross-compiled with MinGW-w64 from the same Linux job,
# which is why no windows-latest runner is needed.
on:
release:
types: [published]
# Allow a manual run (from the Actions tab) to smoke-test the build without
# publishing a release. Manual runs build the artifacts but upload nothing.
workflow_dispatch:
permissions:
contents: write # required to create the release and upload assets
jobs:
release:
runs-on: ubuntu-latest
container:
image: golang:1.22-bookworm
steps:
- name: Checkout
uses: actions/checkout@v4
- name: Install cross toolchain
# Mirrors the package list in the repo Dockerfile: native gcc + X11/GL
# headers for amd64, the aarch64 cross compiler with arm64 runtime libs,
# and the MinGW-w64 toolchain for the Windows GUI binary. zip packages
# the Windows archive.
run: |
dpkg --add-architecture arm64
apt-get update
apt-get install -y --no-install-recommends \
ca-certificates \
gcc \
libc6-dev \
gcc-aarch64-linux-gnu \
libc6-dev-arm64-cross \
linux-libc-dev-arm64-cross \
gcc-mingw-w64-x86-64 \
binutils-mingw-w64-x86-64 \
pkg-config \
libgl1-mesa-dev \
xorg-dev \
libgl1-mesa-dev:arm64 \
libx11-dev:arm64 \
libxcursor-dev:arm64 \
libxrandr-dev:arm64 \
libxinerama-dev:arm64 \
libxi-dev:arm64 \
libxxf86vm-dev:arm64 \
zip
rm -rf /var/lib/apt/lists/*
- name: Derive version
# For a release, use the tag without its leading "v" so the artifact
# names and the injected app version match the release (the release
# event still sets GITHUB_REF_TYPE=tag / GITHUB_REF_NAME=<tag>).
# Otherwise fall back to the version in source (handled by the build
# script).
id: version
run: |
ref="${GITHUB_REF_NAME:-}"
if [ "${GITHUB_REF_TYPE:-}" = "tag" ]; then
echo "value=${ref#v}" >> "$GITHUB_OUTPUT"
fi
- name: Build and package
env:
VERSION: ${{ steps.version.outputs.value }}
run: |
chmod +x scripts/ci-build-release.sh
scripts/ci-build-release.sh
- name: Upload build artifacts
uses: actions/upload-artifact@v4
with:
name: gosentry-release
path: |
dist/linux/*.tar.gz
dist/windows/*.zip
- name: Attach assets to release
# Only runs for the release event; the release already exists, so this
# just uploads the built archives to it. Skipped on workflow_dispatch.
if: github.event_name == 'release'
uses: softprops/action-gh-release@v2
with:
tag_name: ${{ github.event.release.tag_name }}
files: |
dist/linux/*.tar.gz
dist/windows/*.zip
.gitignore
+7 -1
View File
@@ -1,6 +1,9 @@
# Build outputs # Build outputs
dist/ dist/
# Persistent Go build cache for Docker-based release builds.
.gocache/
# Generated Windows resource compiled from packaging/windows/gosentry.rc. # Generated Windows resource compiled from packaging/windows/gosentry.rc.
cmd/gosentry/*.syso cmd/gosentry/*.syso
@@ -11,13 +14,16 @@ cmd/gosentry/*.syso
# Runtime files created next to the executable during local runs. # Runtime files created next to the executable during local runs.
gosentry.json gosentry.json
jobs.json jobs.json
*.yaml
logs/ logs/
# Go workspace/cache files that should stay local if a developer creates them. # Go workspace/cache files that should stay local if a developer creates them.
go.work go.work
go.work.sum go.work.sum
# Claude Code per-developer settings. The shared command in .claude/commands is
# tracked; locally granted tool permissions are not.
.claude/settings.local.json
# GoodSync metadata. This is intentionally kept because the directory is local # GoodSync metadata. This is intentionally kept because the directory is local
# to the user's file synchronization setup. # to the user's file synchronization setup.
_gsdata_/ _gsdata_/
CLAUDE.md
+54
View File
@@ -0,0 +1,54 @@
# GoSentry — instructions for Claude Code
Cross-platform desktop scheduler (Go + Fyne GUI). Single process: GUI,
application service, scheduler, storage, and command runner in one binary.
## Read before changing code
- [docs/STANDARDS.md](docs/STANDARDS.md) — **required.** Code-quality rules and
the list of intentional behavior. Do not "fix" anything listed there as
intentional; if a change contradicts it, update the document in the same commit.
- [docs/ARCHITECTURE.md](docs/ARCHITECTURE.md) — package contracts, event flow, and
§Platform layer (why and where OS-specific code lives).
- [docs/TESTS.md](docs/TESTS.md) — test layout and conventions.
- [docs/ROADMAP.md](docs/ROADMAP.md) — deliberately out of scope.
## Key rules (full list in STANDARDS.md)
- `src/app.Service` is the sole owner of job and runtime state; the UI reads it
through typed events, never through shared mutable state.
- User-facing errors go to `dialog.ShowError` or a History event — never a silent
`return`.
- Pure helpers get a unit test in the same package; fixes of severity ≥ medium get
a regression test.
- UI view constructors accept an injected `*app.Service`; `app.Open()` is called
only from `run.go`.
- Off-main-thread widget updates must go through `fyne.Do` (Fyne v2.7.4).
## Build and test
CGO is required — the Fyne GUI links native libraries. On Windows the toolchain
is MSYS2 UCRT64; the default shell environment here has CGO off, so set it
explicitly:
```powershell
$env:Path = 'C:\msys64\ucrt64\bin;' + $env:Path; $env:CGO_ENABLED = '1'
```
Then:
```powershell
scripts\test.bat
```
which runs `go vet ./...` and `go test -race ./...`. Release binaries come from
`scripts\build-windows.bat` / `scripts/build-linux.sh` — see
[docs/DEVELOPMENT.md](docs/DEVELOPMENT.md).
## Repository conventions
- Commit directly to `main`; do not create feature branches.
- Notable changes get a [docs/CHANGELOG.md](docs/CHANGELOG.md) entry under the
current version.
- The window/taskbar icon comes from the `gosentry.ico` PE resource — regenerate
it from the PNGs whenever an icon changes, not just the embedded asset.
README.md
+260 -335
View File
@@ -1,179 +1,278 @@
<p align="center">
<picture>
<source media="(prefers-color-scheme: dark)" srcset="assets/logo/gosentry-logo-dark.svg">
<img src="assets/logo/gosentry-logo.svg" alt="GoSentry" width="420">
</picture>
</p>
# GoSentry # GoSentry
GoSentry is a cross-platform desktop scheduler inspired by cron. It provides a native GUI for creating, grouping, pausing, running, and monitoring scheduled shell commands. GoSentry is a cross-platform desktop scheduler. It provides a native GUI for
creating, grouping, pausing, running, and monitoring scheduled shell commands.
GoSentry is being designed and implemented with assistance from OpenAI Codex. ## Screenshots
Project notes: <table>
<tr>
- [Changelog](docs/CHANGELOG.md) <td align="center"><img src="docs/screenshots/screenshot_jobs.PNG" alt="Jobs tab"><br><em>Jobs tab — job list with details panel and run statistics.</em></td>
- [Roadmap](docs/ROADMAP.md) <td align="center"><img src="docs/screenshots/screenshot_history.PNG" alt="History tab"><br><em>History tab — past runs with trigger, state, and log file.</em></td>
- [Architecture](docs/ARCHITECTURE.md) </tr>
- [Refactoring plan](docs/REFACTORING.md) <tr>
<td align="center" colspan="2"><img src="docs/screenshots/screenshot_settings.PNG" alt="Settings tab"><br><em>Settings tab — application, queue, storage, and version info.</em></td>
</tr>
</table>
## Features ## Features
- Native desktop GUI built with [Fyne](https://fyne.io/). - Native desktop GUI built with [Fyne](https://fyne.io/).
- Job storage in one clean YAML file. - Job definitions stored in a clean, hand-editable `jobs.json`.
- App settings in a separate YAML file. - `@every` intervals and standard 5-field cron expressions.
- `@every` schedules and standard 5-field cron expressions.
- Manual and scheduled command runs. - Manual and scheduled command runs.
- Per-run `.log` files with stdout/stderr. - Parallel or sequential execution mode; overlap policy (skip or queue) set globally or per job.
- Run timeout, off by default, set globally or per job.
- Per-run `.log` files with stdout/stderr capture.
- Log cleanup by maximum file count and maximum age. - Log cleanup by maximum file count and maximum age.
- Global pause/resume for all job execution. - Global pause/resume for scheduled job execution (manual runs remain available).
- Windows tray support. - Desktop notifications on job failure.
- Version shown in the window title, Settings, and build artifact names. - Windows tray icon: left-click to show the window, right-click for the menu.
- Autostart on login (Windows shortcut; Linux XDG desktop entry).
- Detailed or compact job list, and a system or branded theme; both are remembered.
## Requirements ## Platforms
Common: GoSentry is built and tested on **Windows** and **Linux**:
- [Go](https://go.dev/) 1.22 or newer. | Platform | Status | Notes |
|----------|--------|-------|
| Windows | Supported | Tray icon, autostart shortcut (`.lnk`), desktop integration. |
| Linux | Supported | Autostart via XDG desktop entry; desktop integration on X11/Wayland. |
| macOS | Not supported | The Fyne GUI may build, but autostart and desktop integration are not implemented. |
Windows: ## Documentation
- MSYS2 with UCRT64 GCC in `C:\msys64\ucrt64\bin`. - [Changelog](docs/CHANGELOG.md) — record of notable changes by version
- [Roadmap](docs/ROADMAP.md) — planned work larger than a single bug fix
- [Architecture](docs/ARCHITECTURE.md) — component interaction model
- [Standards](docs/STANDARDS.md) — quality rules and intentional behavior
- [Development](docs/DEVELOPMENT.md) — build instructions, project layout, dependencies
- [Tests](docs/TESTS.md) — test suite layout and how to run it
- [Performance](docs/PERFORMANCE.md) — measured performance findings
Install these dependencies on Windows: ## Storage
```powershell GoSentry stores its files next to the executable by default, making it a
# 1. Install Go 1.22 or newer from https://go.dev/dl/. portable application: moving the program folder also moves its configuration.
# The default installer path is C:\Program Files\Go.
go version
# 2. Install MSYS2 from https://www.msys2.org/. `gosentry.json` stores application settings:
# Use the default installation path so UCRT64 tools are placed under
# C:\msys64\ucrt64\bin.
# 3. Open "MSYS2 UCRT64" from the Start menu and install GCC plus windres. ```json
pacman -Syu {
pacman -S --needed mingw-w64-ucrt-x86_64-gcc mingw-w64-ucrt-x86_64-binutils "jobs_file": "jobs.json",
"logs_dir": "logs",
# 4. In PowerShell, check that the compiler is available where the build script "max_log_files": 100,
# expects it. build-windows.bat prepends this directory automatically. "max_log_age_days": 30,
Test-Path C:\msys64\ucrt64\bin\gcc.exe "keep_running_in_tray": true,
Test-Path C:\msys64\ucrt64\bin\windres.exe "notify_on_failure": true,
"execution_mode": "parallel",
"overlap_policy": "skip",
"default_timeout_seconds": 0,
"theme": "gosentry",
"job_list_view": "detailed"
}
``` ```
That is the file GoSentry writes on first run. `default_timeout_seconds` is the
run timeout applied to jobs that do not set their own; `0` means no timeout, and
it is written out even though it is zero, because a missing value and a
deliberate "no timeout" have to stay distinguishable in a hand-edited file.
`theme` is `system` or `gosentry` (the branded teal/amber look), and
`job_list_view` is `detailed` or `compact` — both are remembered from the
choices made in the app. Keys left at their off value (`start_on_login`,
`paused`) are omitted until they are turned on.
`jobs.json` stores job definitions:
```json
{
"jobs": [
{
"id": 1,
"name": "Hello scheduler",
"folder": "Examples",
"schedule": "@every 1m",
"command": "echo GoSentry test job: scheduler is alive",
"enabled": true
}
]
}
```
`jobs_file` is the file GoSentry reads job definitions from, file name included,
so the file can be named anything. The default `"jobs.json"` is relative and
resolves to the executable's folder. An absolute path can be used when jobs
should live elsewhere, such as a shared network drive.
A `gosentry.json` from an earlier version that carries `jobs_dir` instead keeps
working: the directory is combined with `jobs.json` on load, and the file is
rewritten with `jobs_file`.
`logs_dir` is relative to the program folder when it does not start with a
drive letter or `/`.
Command output is written to separate files under `logs_dir`. File names
include the run timestamp and job name:
```text
20260614-224306_Hello_scheduler.log
```
## Schedules
GoSentry accepts two schedule forms: fixed `@every` intervals and standard
5-field cron expressions.
### `@every` intervals
Write `@every` followed by a [Go duration](https://pkg.go.dev/time#ParseDuration)
— a positive number with a unit suffix. Units can be combined in one value:
```text
@every 10s every 10 seconds
@every 5m every 5 minutes
@every 1h every hour
@every 1h30m every hour and a half (same as @every 90m)
@every 2h45m10s hours, minutes, and seconds combined
```
Supported units:
| Unit | Meaning |
|------|---------|
| `ns` | nanoseconds |
| `us`, `µs` | microseconds |
| `ms` | milliseconds |
| `s` | seconds |
| `m` | minutes |
| `h` | hours |
`@every` does **not** support days, weeks, months, or years — those follow a
calendar, not a fixed interval. For “every day at 02:00”, “on the 1st of each
month”, or “once a year”, use a cron expression (below).
The scheduler checks due jobs once per second, so values shorter than `1s` are
accepted but will not fire faster than once a second.
### Cron expressions
Five fields: minute, hour, day-of-month, month, day-of-week.
```text
*/5 * * * * every five minutes
0 2 * * * every day at 02:00
30 9 * * 1-5 weekdays at 09:30
0 0 1 * * first day of every month at midnight
0 0 1 1 * every year on 1 January at midnight
```
Named descriptors are also accepted: `@hourly`, `@daily`, `@weekly`,
`@monthly`, `@yearly` (and `@annually`, `@midnight`).
## Using The App
1. Start GoSentry.
2. Use **New job** to create a scheduled command.
3. Set **Schedule**, **Command**, optional **Arguments**, **Folder**, and **Enabled**.
4. Use **Run now** for a one-off manual run without waiting for the schedule.
5. Use **Pause** on a single job to suspend it without deleting it.
6. Use **Disable auto** as a global stop switch for all scheduled runs.
7. Open **History** to see past runs, their trigger (`Manual`, `Schedule`, or `UI`), state, and log file.
8. Open **Settings** to change the storage paths, log cleanup limits, queue behavior, and notifications.
The **Jobs file** row picks the file itself: **Browse** lists `.json` files, and
a path can also be typed to name a file that does not exist yet. What Save does
depends on whether that file is already there:
- **The file exists** — its jobs are loaded and replace the current list, so
selecting a jobs file switches to it (another machine's file, a shared one on
a network drive). History records how many jobs were loaded and from where.
- **The file does not exist** — the current jobs are written to it, which is how
the jobs file is renamed or moved somewhere else.
Switching to a different jobs file is refused while a job is running, because
loading a new list discards the run state of the old one.
The **Start on login** checkbox shows an `OK` or `Problem` status. Saving with
it enabled writes an autostart entry using the current executable path.
When **Keep running in the system tray** is also enabled, the entry includes
`--start-in-tray` so scheduled jobs run after sign-in without opening the main
window. With the tray option off, autostart still works but opens the main
window normally. Changing the tray setting updates close behaviour and the
autostart entry immediately; the tray icon itself updates only after you restart
GoSentry (a Fyne limitation — see [docs/ROADMAP.md](docs/ROADMAP.md)).
## Queue Settings
Three settings in the **Queue** group of the Settings tab control how
simultaneous, overlapping, and over-long runs are handled.
**Execution mode** — applies when multiple jobs become due at the same tick:
| Value | Behaviour |
|-------|-----------|
| `parallel` (default) | All due jobs start at the same time. |
| `sequential` | Due jobs are started one after another, in the order they appear in the list. |
**Default overlap policy** — applies when a job's next scheduled run fires while
its previous run is still active:
| Value | Behaviour |
|-------|-----------|
| `skip` (default) | The new run is discarded; the running instance continues. |
| `queue` | The new run is held and starts immediately after the current run finishes. |
**Default timeout (s)** — how long a run may take before it is killed. `0` (the
default) means no limit.
The last two are defaults: a job's own dialog has an **Overlap policy** and a
**Timeout (s)** field that override them. A job that overrides nothing follows
whatever the Settings tab says, so changing a default moves every such job with
it. In `jobs.json` an override is an `overlap_policy` or `timeout_seconds` key
on the job; absent means inherit. A `"timeout_seconds": 0` on a job is an
override too — it means that job has no timeout even when the global default
sets one.
## Notifications
When **Notify on failure** is enabled in Settings, GoSentry sends a desktop
notification whenever a scheduled or manual run ends in the `Failed` state —
a non-zero exit code, a timeout, or a process that failed to start.
The notification shows the job name and the failure detail.
## Autostart
GoSentry is a user desktop application, not a system daemon, so autostart is
configured per user.
Linux: Linux:
- A C compiler. ```ini
- [Fyne](https://fyne.io/) native build dependencies, including OpenGL/X11 development packages. # GoSentry writes an XDG Autostart desktop entry when Start on login is enabled.
~/.config/autostart/gosentry.desktop
On Debian/Ubuntu, the Linux dependencies are typically: [Desktop Entry]
Type=Application
```bash Name=GoSentry
# Go builds the application, gcc is required by CGO/Fyne, and the OpenGL/X11 Exec=/opt/gosentry/gosentry-<version>-linux-amd64 --start-in-tray
# development packages provide the native desktop headers used by Fyne. Terminal=false
sudo apt install golang gcc libgl1-mesa-dev xorg-dev
``` ```
## Build
Windows: Windows:
```powershell
# Builds dist\windows\gosentry-<version>-windows-amd64.exe. The script changes
# to the repository root first, so double-clicking it from Explorer works. It
# also adds MSYS2 UCRT64 to PATH for this process only, embeds the Windows icon
# when windres is available, and uses the Windows GUI subsystem so no console
# window opens at startup.
.\scripts\build-windows.bat
```
The Windows build is created as a GUI application, so it does not open a terminal window.
The binary is written to:
```text ```text
# GUI executable produced by scripts\build-windows.bat. # GoSentry writes a shortcut to the current user's Startup folder.
dist\windows\gosentry-0.3.0-windows-amd64.exe # A .lnk stores the executable path as TargetPath and --start-in-tray as
``` # Arguments, so paths with spaces do not need fragile command-line quoting.
%APPDATA%\Microsoft\Windows\Start Menu\Programs\Startup\GoSentry.lnk
Linux:
```bash
# Make the helper executable once, then build a linux/amd64 Fyne binary.
chmod +x ./scripts/build-linux.sh
./scripts/build-linux.sh
```
The binary is written to:
```text
# Linux executable produced by scripts/build-linux.sh.
dist/linux/gosentry-0.3.0-linux-amd64
```
Linux using Docker:
```bash
# Builds the Linux binary inside Docker using the versioned image tag
# gitea.mixdep.ru/mix/gosentry-builder:<version>. Useful from hosts or CI jobs
# where the native Linux/Fyne packages are not installed locally.
chmod +x ./scripts/build-linux-docker.sh
./scripts/build-linux-docker.sh
```
The binary is copied to:
```text
# Linux executable copied out of the Docker build image.
dist\linux\gosentry-0.3.0-linux-amd64
```
Release build from Linux:
```bash
# Interactively choose Linux amd64, Linux arm64, Windows amd64, or all artifacts
# from one Linux/Docker workflow. The Dockerfile contains the builder
# environment; the build commands live in this script. Docker runs the build
# with the current user's UID/GID so dist/ files are not owned by root.
chmod +x ./scripts/build-release-linux.sh
./scripts/build-release-linux.sh
```
Non-interactive release builds can pass target names:
```bash
# Build only Linux arm64 and Windows amd64 artifacts.
./scripts/build-release-linux.sh linux-arm64 windows-amd64
```
The binaries are copied to:
```text
# Linux artifact.
dist/linux/gosentry-0.3.0-linux-amd64
# Linux arm64 artifact.
dist/linux/gosentry-0.3.0-linux-arm64
# Windows artifact cross-compiled from Linux.
dist/windows/gosentry-0.3.0-windows-amd64.exe
```
## Run From Source
Windows:
```powershell
# Fyne requires CGO on Windows. MSYS2 UCRT64 provides the C compiler and native
# libraries used by the desktop backend.
$env:Path = 'C:\msys64\ucrt64\bin;' + $env:Path
$env:CGO_ENABLED = '1'
# go run starts the app from source. Use scripts\build-windows.bat when you need
# a standalone .exe without a console window.
& 'C:\Program Files\Go\bin\go.exe' run ./cmd/gosentry
```
Linux:
```bash
# CGO must stay enabled because the Fyne GUI links against native Linux desktop
# libraries.
CGO_ENABLED=1 go run ./cmd/gosentry
``` ```
## Troubleshooting ## Troubleshooting
@@ -181,212 +280,38 @@ CGO_ENABLED=1 go run ./cmd/gosentry
### Windows, VirtualBox, RDP, And OpenGL ### Windows, VirtualBox, RDP, And OpenGL
GoSentry uses [Fyne](https://fyne.io/), and Fyne uses GLFW/OpenGL to create the GoSentry uses [Fyne](https://fyne.io/), and Fyne uses GLFW/OpenGL to create the
desktop window. In a Windows virtual machine, especially when the session is desktop window. In a Windows virtual machine, especially when accessed through
opened through RDP inside VirtualBox, the available video driver can fail OpenGL RDP inside VirtualBox, the available video driver can fail OpenGL initialization.
initialization.
Typical error: Typical error:
```text ```text
Fyne error: window creation error Fyne error: window creation error
Cause: APIUnavailable: WGL: The driver does not appear to support OpenGL Cause: APIUnavailable: WGL: The driver does not appear to support OpenGL
At: fyne.io/fyne/v2@v2.5.3/internal/driver/glfw/driver.go:149
``` ```
Known workaround: Known workaround:
1. Download a Windows Mesa build from 1. Download a Windows Mesa build from
[mesa-dist-win](https://github.com/pal1000/mesa-dist-win/releases). For a [mesa-dist-win](https://github.com/pal1000/mesa-dist-win/releases). Use the
regular Windows x64 GoSentry build, use the archive named like archive named like `mesa3d-<version>-release-mingw.7z` — this matches the
`mesa3d-<version>-release-mingw.7z`, for example MSYS2 GCC toolchain used to build GoSentry. The `devel`, `debug-info`,
`mesa3d-26.1.1-release-mingw.7z`. This matches the MSYS2 GCC toolchain used `tests`, and checksum files are not needed.
to build GoSentry. The `devel`, `debug-info`, `tests`, and checksum files 2. Open the archive and use the `x64` build.
are not needed for this workaround.
2. Open the downloaded archive and use the `x64` build from it.
3. Copy the Mesa OpenGL DLL files from `x64` into the same directory as the 3. Copy the Mesa OpenGL DLL files from `x64` into the same directory as the
GoSentry `.exe`, for example: GoSentry `.exe`:
```text ```text
dist\windows\ dist\windows\
gosentry-0.3.0-windows-amd64.exe gosentry-<version>-windows-amd64.exe
opengl32.dll opengl32.dll
... ...
``` ```
This makes Windows load Mesa's software OpenGL implementation next to the Mesa's software OpenGL implementation lets the Fyne window start even when the
application binary, which lets the Fyne window start even when the VirtualBox/RDP VirtualBox/RDP driver does not provide usable OpenGL.
driver does not provide usable OpenGL.
## Storage ## Development assistance
GoSentry creates its runtime files next to the executable by default. Parts of this project were developed with assistance from [Cursor](https://cursor.com/) AI (Composer agent)
and [Claude Code](https://claude.com/claude-code).
`gosentry.yaml` stores application settings:
```yaml
# Directory containing jobs.yaml. "." means "the folder where the GoSentry
# executable lives"; an absolute path can be used when jobs should live elsewhere.
jobs_dir: .
# Directory for per-run command output logs. Relative paths are resolved against
# the program folder, just like jobs_dir.
logs_dir: logs
# Keep at most this many .log files after cleanup. Newest logs are preserved.
max_log_files: 100
# Delete .log files older than this many days during cleanup.
max_log_age_days: 30
# Start GoSentry automatically when the current desktop user signs in.
start_on_login: false
# Closing the window hides it to the tray instead of stopping the scheduler.
keep_running_in_tray: true
# Reserved for desktop failure notifications; the setting is stored now so the
# UI and config format do not need to change when notifications are wired fully.
notify_on_failure: true
```
`jobs.yaml` stores only job definitions:
```yaml
jobs:
# A harmless sample job created on first run so the scheduler can be tested
# immediately. Runtime fields such as last run time, next run time, and command
# output are intentionally not stored here; they are displayed in the GUI and
# written to separate log files.
- id: 1
# Human-readable name shown in the jobs list and used in log file names.
name: Hello scheduler
# Optional grouping label. Omit it or leave it empty to put the job under
# the "No folder" filter.
folder: Examples
# Either @every with a Go duration, or a standard five-field cron expression.
schedule: '@every 1m'
# Command passed to the platform shell: cmd.exe /C on Windows, sh -c on Linux.
command: echo GoSentry test job: scheduler is alive
# Disabled jobs remain in jobs.yaml but are skipped by the scheduler.
enabled: true
```
Command output is written to separate files under `logs_dir`. File names include the run timestamp and job name, for example:
```text
# Format: YYYYMMDD-HHMMSS_<sanitized job name>.log
20260614-224306_Hello_scheduler.log
```
## Schedules
Fast interval schedules:
```text
# Go duration syntax after @every; useful for tests and simple intervals.
@every 10s
@every 5m
@every 1h30m
```
Standard 5-field cron schedules:
```text
# Standard five-field cron: minute hour day-of-month month day-of-week.
*/5 * * * * every five minutes
0 2 * * * every day at 02:00
30 9 * * 1-5 weekdays at 09:30
```
## Using The App
1. Start GoSentry.
2. Use `New job` to create a command.
3. Set `Schedule`, `Command`, optional `Folder`, and `Enabled`.
4. Use `Run now` for a manual test run.
5. Use `Pause` to disable one job.
6. Use `Pause all` as a global stop switch.
7. Open `History` to see whether a run was `Manual`, `Schedule`, or `UI`.
8. Open `Settings` to change `jobs_dir`, `logs_dir`, and log cleanup limits. Use `Browse` to choose directories.
Changing `jobs_dir` saves the current job list to the new directory.
The `Start on login` setting shows an `OK` or `Problem` status next to the checkbox. Saving settings with the checkbox enabled rewrites the autostart entry using the current executable path.
Autostart entries add `--start-in-tray`, so scheduled jobs begin running after sign-in without opening the main window.
## Autostart
GoSentry is a user desktop application, not a system daemon, so autostart should be configured per user.
Linux:
```ini
# GoSentry writes an XDG Autostart desktop entry when Start on login is enabled.
# This is better for a GUI/tray application than a systemd user service because
# the desktop environment starts it inside the graphical user session.
# Saving the setting also removes the old ~/.config/systemd/user/pysentry.service
# unit if it was created by an earlier GoSentry build.
~/.config/autostart/gosentry.desktop
[Desktop Entry]
Type=Application
Name=GoSentry
Exec=/opt/gosentry/gosentry-0.3.0-linux-amd64 --start-in-tray
Terminal=false
```
Windows:
```text
# GoSentry writes a shortcut to the current user's Startup folder when Start on
# login is enabled. A .lnk stores the executable path as a structured TargetPath,
# and stores --start-in-tray as Arguments, so paths with spaces do not need
# fragile command-line quoting. Saving settings rewrites the shortcut and removes
# old HKCU Run entries from earlier builds.
%APPDATA%\Microsoft\Windows\Start Menu\Programs\Startup\GoSentry.lnk
```
## Project Layout
- `cmd/gosentry` — entry point; starts the desktop app.
- `src/domain` — pure value types: `Job`, `Config`, `RunRecord`, `Schedule`, `JobRuntime`.
- `src/app` — `Service`: sole owner of job and runtime state; emits typed events to the UI.
- `src/scheduler` — pure timing loop; calls `Service.RunDue` on every tick.
- `src/runner` — shell command execution, log file writing, and log cleanup.
- `src/storage` — YAML persistence (`gosentry.yaml`, `jobs.yaml`).
- `src/platform/autostart` — `Manager` interface with Windows (shortcut) and Linux (XDG) implementations.
- `src/platform/desktop` — display-scale helper (Linux only).
- `src/platform/winproc` — hidden-window startup flags (Windows only).
- `src/ui` — Fyne windows, tabs, and dialogs; reads service state through events.
- `assets` — app icons embedded into the application binary.
- `scripts` — build helpers.
- `docs` — architecture notes, changelog, and roadmap.
Build outputs are written to `dist/`.
## Dependencies
GoSentry keeps the direct dependency list intentionally small:
- [`fyne.io/fyne/v2`](https://fyne.io/) for the native GUI.
- `github.com/robfig/cron/v3` for cron schedule parsing.
- [`go.yaml.in/yaml/v4`](https://github.com/yaml/go-yaml) for YAML settings and jobs.
The remaining entries in `go.mod` are indirect dependencies pulled by Fyne and the Go module resolver.
Source repositories for mirroring:
- Go toolchain: https://go.googlesource.com/go
- Fyne: https://github.com/fyne-io/fyne
- robfig/cron: https://github.com/robfig/cron
- yaml/go-yaml: https://github.com/yaml/go-yaml
To list every direct and indirect Go module used by the current checkout:
```bash
go list -m all
```
assets/assets.go
+18 -16
View File
@@ -17,7 +17,7 @@ import (
// The hard constraint: Fyne's a.SetIcon and SetSystemTrayIcon each take ONE // The hard constraint: Fyne's a.SetIcon and SetSystemTrayIcon each take ONE
// image, which the OS then scales to every size it needs — titlebar (~16px), // image, which the OS then scales to every size it needs — titlebar (~16px),
// taskbar/dock (~32-48px), and tray. Neither source survives that scaling: // taskbar/dock (~32-48px), and tray. Neither source survives that scaling:
// downscaling the 1254px gosentry-icon-big.png to 16px is muddy, and upscaling // downscaling the 1254px gosentry-icon-large.png to 16px is muddy, and upscaling
// the 16px icon to 32px is blurry. The fix is to feed each surface a // the 16px icon to 32px is blurry. The fix is to feed each surface a
// size-appropriate source — which differs per platform because each platform // size-appropriate source — which differs per platform because each platform
// exposes different icon channels. // exposes different icon channels.
@@ -26,13 +26,13 @@ import (
// leaves the anti-aliased edge fully opaque as a light halo that reads as a // leaves the anti-aliased edge fully opaque as a light halo that reads as a
// border on a dark taskbar/tray, so the background is removed with feathered // border on a dark taskbar/tray, so the background is removed with feathered
// color-to-alpha instead): // color-to-alpha instead):
// - gosentry-icon-big.png detailed large artwork (teal rounded-tile emblem) // - gosentry-icon-large.png detailed large artwork (teal rounded-tile emblem)
// - gosentry-icon-16x16.png hand-tuned for legibility at 16px // - gosentry-icon-small.png hand-tuned for legibility at 16px
// - gosentry.ico multi-size 16/32/48/256 (16 = the hand-tuned PNG, // - gosentry.ico multi-size 16/32/48/256 (16 = the hand-tuned PNG,
// the rest downscaled from big). Embedded into the PE // the rest downscaled from large). Embedded into the PE
// binary by windres (see scripts/build-windows.bat), // binary by windres (see scripts/build-windows.bat),
// NOT via Go embed. // NOT via Go embed.
// - gosentry-icon-16x16.ico single 16px frame, for the Windows tray // - gosentry-icon-small.ico single 16px frame, for the Windows tray
// //
// Windows: // Windows:
// - Window titlebar + taskbar: the multi-size gosentry.ico, embedded by the .rc // - Window titlebar + taskbar: the multi-size gosentry.ico, embedded by the .rc
@@ -44,6 +44,8 @@ import (
// - Tray: SetSystemTrayIcon(IconSmallICO()). The notification area is ICO-native // - Tray: SetSystemTrayIcon(IconSmallICO()). The notification area is ICO-native
// and renders at 16-24px; a single-frame 16x16 .ico pins the hand-tuned glyph // and renders at 16-24px; a single-frame 16x16 .ico pins the hand-tuned glyph
// (a multi-size .ico made the tray pick and downscale a larger frame). // (a multi-size .ico made the tray pick and downscale a larger frame).
// - Desktop toasts: AppMetadata.Icon (set after NewWindow in run.go) feeds
// SendNotification without calling SetIcon, which would override GLFW_ICON.
// //
// Linux / other non-Windows (no PE icon resource exists): // Linux / other non-Windows (no PE icon resource exists):
// - Window titlebar: a.SetIcon(IconSmall()) in run.go feeds the resource to // - Window titlebar: a.SetIcon(IconSmall()) in run.go feeds the resource to
@@ -54,20 +56,20 @@ import (
// - Tray: SetSystemTrayIcon(Icon()). StatusNotifierItem renders 22-48px and takes // - Tray: SetSystemTrayIcon(Icon()). StatusNotifierItem renders 22-48px and takes
// a PNG, so the big artwork scales down cleanly (the 16x16 would look tiny). // a PNG, so the big artwork scales down cleanly (the 16x16 would look tiny).
//go:embed gosentry-icon-16x16.png //go:embed gosentry-icon-small.png
var iconSmallBytes []byte var iconSmallBytes []byte
//go:embed gosentry-icon-big.png //go:embed gosentry-icon-large.png
var iconBytes []byte var iconLargeBytes []byte
//go:embed gosentry-icon-16x16.ico //go:embed gosentry-icon-small.ico
var iconSmallICOBytes []byte var iconSmallICOBytes []byte
// IconSmall returns the hand-tuned 16x16 PNG. It is the Linux window-titlebar // IconSmall returns the hand-tuned 16x16 PNG. It is the Linux window-titlebar
// icon (via a.SetIcon -> _NET_WM_ICON, which the WM renders at ~16px). On Windows // icon (via a.SetIcon -> _NET_WM_ICON, which the WM renders at ~16px). On Windows
// the titlebar comes from gosentry.ico instead; see the package strategy above. // the titlebar comes from gosentry.ico instead; see the package strategy above.
func IconSmall() fyne.Resource { func IconSmall() fyne.Resource {
return fyne.NewStaticResource("gosentry-icon-16x16.png", iconSmallBytes) return fyne.NewStaticResource("gosentry-icon-small.png", iconSmallBytes)
} }
// IconSmallICO returns a single-frame 16x16 Windows .ico of the hand-tuned small // IconSmallICO returns a single-frame 16x16 Windows .ico of the hand-tuned small
@@ -75,18 +77,18 @@ func IconSmall() fyne.Resource {
// pinning a single 16x16 frame keeps the hand-tuned glyph crisp at tray size — a // pinning a single 16x16 frame keeps the hand-tuned glyph crisp at tray size — a
// multi-size .ico lets the tray pick and downscale a larger, muddier frame. // multi-size .ico lets the tray pick and downscale a larger, muddier frame.
func IconSmallICO() fyne.Resource { func IconSmallICO() fyne.Resource {
return fyne.NewStaticResource("gosentry-icon-16x16.ico", iconSmallICOBytes) return fyne.NewStaticResource("gosentry-icon-small.ico", iconSmallICOBytes)
} }
// Icon returns the large artwork PNG. It is the Linux tray icon (StatusNotifierItem // Icon returns the large artwork PNG. It is the Linux tray icon (StatusNotifierItem
// renders 22-48px) and the source for the Linux .desktop dock icon via IconBytes. // renders 22-48px) and the source for the Linux .desktop dock icon via IconBytes.
// The Windows window/taskbar icon comes from gosentry.ico, not this resource. // The Windows window/taskbar icon comes from gosentry.ico, not this resource.
func Icon() fyne.Resource { func Icon() fyne.Resource {
return fyne.NewStaticResource("gosentry-icon-big.png", iconBytes) return fyne.NewStaticResource("gosentry-icon-large.png", iconLargeBytes)
} }
// IconBytes is the large artwork as raw PNG bytes for InstallDesktopIcon, which // IconBytes is the large artwork as raw PNG bytes for InstallDesktopIcon, which
// writes the Linux .desktop launcher/dock icon. // writes the Linux .desktop launcher/dock icon.
func IconBytes() []byte { func IconBytes() []byte {
return append([]byte(nil), iconBytes...) return append([]byte(nil), iconLargeBytes...)
} }
assets/gosentry-icon-big.png → assets/gosentry-icon-large.png
View File
Side by Side Swipe Overlay

Before

Width:  |  Height:  |  Size: 1.1 MiB

After

Width:  |  Height:  |  Size: 1.1 MiB

assets/gosentry-icon-16x16.ico → assets/gosentry-icon-small.ico
View File
Side by Side Swipe Overlay

Before

Width:  |  Height:  |  Size: 264 B

After

Width:  |  Height:  |  Size: 264 B

assets/gosentry-icon-16x16.png → assets/gosentry-icon-small.png
View File
Side by Side Swipe Overlay

Before

Width:  |  Height:  |  Size: 242 B

After

Width:  |  Height:  |  Size: 242 B

assets/gosentry-logo.html
+120
View File
@@ -0,0 +1,120 @@
<!DOCTYPE html>
<html lang="ru">
<head>
<meta charset="UTF-8">
<meta name="viewport" content="width=device-width, initial-scale=1.0">
<title>GoSentry — логотип v3</title>
<link rel="preconnect" href="https://fonts.googleapis.com">
<link rel="preconnect" href="https://fonts.gstatic.com" crossorigin>
<link href="https://fonts.googleapis.com/css2?family=Sora:wght@500;600;700&family=Space+Grotesk:wght@500;600;700&family=Bricolage+Grotesque:opsz,wght@12..96,600;12..96,700&family=Inter:wght@400;500&display=swap" rel="stylesheet">
<style>
:root{
--petrol:#0A4A58; --petrol-900:#04262E; --amber:#F7A80C;
--ink:#04252C; --paper:#F1F5F5; --line-l:rgba(4,37,44,.12);
}
*{box-sizing:border-box}
body{margin:0;background:var(--paper);color:var(--ink);
font-family:"Inter",system-ui,sans-serif;-webkit-font-smoothing:antialiased}
.wrap{max-width:1080px;margin:0 auto;padding:0 26px}
header{background:radial-gradient(120% 140% at 80% 0%,var(--petrol),var(--petrol-900));color:#fff;padding:50px 0 40px}
header .eyebrow{font-family:"Space Grotesk";font-weight:600;font-size:12px;letter-spacing:.2em;text-transform:uppercase;color:var(--amber);margin:0 0 12px}
header h1{font-family:"Space Grotesk";font-weight:700;font-size:clamp(24px,4vw,34px);margin:0 0 8px;letter-spacing:-.02em}
header p{margin:0;color:rgba(255,255,255,.72);max-width:62ch;font-size:15px}
section{border-bottom:1px solid var(--line-l);padding:40px 0}
.chead{display:flex;align-items:baseline;gap:14px;margin-bottom:6px;flex-wrap:wrap}
.num{font-family:"Space Grotesk";font-weight:700;color:var(--amber);font-size:14px}
.ctitle{font-family:"Space Grotesk";font-weight:700;font-size:19px;margin:0;letter-spacing:-.01em}
.cnote{font-size:14px;color:#4b666e;margin:0 0 22px;max-width:66ch}
/* wordmark engine */
.wm{font-weight:600;letter-spacing:-.03em;line-height:1;white-space:nowrap;display:inline-flex;align-items:baseline}
.wm .am{color:var(--amber)} .wm .pe{color:var(--petrol)}
.deep .wm .pe{color:#fff}
.dial{width:.68em;height:.68em;display:inline-block;transform:translateY(.02em);margin:0 .015em}
.f-space{font-family:"Space Grotesk"} .f-sora{font-family:"Sora"} .f-bric{font-family:"Bricolage Grotesque"}
.hero-stage{display:grid;grid-template-columns:1fr 1fr;gap:16px}
.panel{border-radius:16px;min-height:170px;display:flex;align-items:center;justify-content:center;padding:30px;border:1px solid var(--line-l);position:relative}
.panel.light{background:#fff}
.panel.deep{background:var(--petrol-900);border-color:transparent}
.tag{position:absolute;top:12px;left:14px;font-family:"Space Grotesk";font-weight:600;font-size:10px;letter-spacing:.14em;color:rgba(4,37,44,.22);text-transform:uppercase}
.deep .tag{color:rgba(255,255,255,.3)}
.hero .wm{font-size:clamp(46px,11vw,82px)}
.row{display:grid;grid-template-columns:repeat(3,1fr);gap:14px}
.cell{background:#fff;border:1px solid var(--line-l);border-radius:14px;padding:26px 18px;text-align:center}
.cell .lbl{font-family:"Space Grotesk";font-weight:600;font-size:10.5px;letter-spacing:.12em;text-transform:uppercase;color:#5E7580;margin:0 0 16px}
.cell .wm{font-size:38px}
.rec{display:inline-block;font-family:"Space Grotesk";font-weight:700;font-size:9.5px;letter-spacing:.1em;text-transform:uppercase;color:var(--amber);border:1px solid var(--amber);border-radius:5px;padding:2px 6px;margin-left:8px;vertical-align:1px}
.faces{display:grid;grid-template-columns:1fr;gap:12px}
.frow{background:#fff;border:1px solid var(--line-l);border-radius:14px;padding:20px 26px;display:flex;align-items:center;justify-content:space-between;gap:20px;flex-wrap:wrap}
.frow .fn{font-family:"Space Grotesk";font-weight:600;font-size:11px;letter-spacing:.12em;text-transform:uppercase;color:#5E7580;min-width:150px}
.frow .wm{font-size:clamp(34px,7vw,50px)}
.foot{padding:30px 0 60px;color:#5E7580;font-family:"Space Grotesk";font-weight:500;font-size:12.5px}
:focus-visible{outline:3px solid var(--amber);outline-offset:3px}
@media (max-width:760px){.hero-stage{grid-template-columns:1fr}.row{grid-template-columns:1fr}}
</style>
</head>
<body>
<header>
<div class="wrap">
<p class="eyebrow">GoSentry / logotype · v3</p>
<h1>Two-tone + деталь: «o» как циферблат</h1>
<p>В слове уже есть готовый кружок — буква «o» в «Go». Делаем из неё маленький циферблат: тема расписания и «дозора» встроена прямо в надпись, а не приклеена сбоку иконкой.</p>
</div>
</header>
<!-- HERO: recommended -->
<section class="hero"><div class="wrap">
<div class="chead"><span class="num">★</span><h3 class="ctitle">Рекомендую: Space Grotesk + стрелки</h3></div>
<p class="cnote">Янтарные «G» и циферблат-«o», петрол «Sentry». Циферблат со стрелками сразу читается как часы и держит характер даже мелко.</p>
<div class="hero-stage">
<div class="panel light"><span class="tag">light</span>
<span class="wm f-space"><span class="am">G</span><svg class="dial" viewBox="0 0 100 100"><circle cx="50" cy="50" r="36" fill="none" stroke="#F7A80C" stroke-width="13"/><path d="M50 50 L50 28" stroke="#F7A80C" stroke-width="9" stroke-linecap="round"/><path d="M50 50 L67 58" stroke="#F7A80C" stroke-width="9" stroke-linecap="round"/><circle cx="50" cy="50" r="6" fill="#F7A80C"/></svg><span class="pe">Sentry</span></span>
</div>
<div class="panel deep"><span class="tag">dark</span>
<span class="wm f-space"><span class="am">G</span><svg class="dial" viewBox="0 0 100 100"><circle cx="50" cy="50" r="36" fill="none" stroke="#F7A80C" stroke-width="13"/><path d="M50 50 L50 28" stroke="#F7A80C" stroke-width="9" stroke-linecap="round"/><path d="M50 50 L67 58" stroke="#F7A80C" stroke-width="9" stroke-linecap="round"/><circle cx="50" cy="50" r="6" fill="#F7A80C"/></svg><span class="pe">Sentry</span></span>
</div>
</div>
</div></section>
<!-- dial intensity -->
<section><div class="wrap">
<div class="chead"><span class="num">01</span><h3 class="ctitle">Насколько «часы» показывать</h3></div>
<p class="cnote">Три уровня детали в «o». Слева — обычная буква (деталь почти незаметна), в центре — одна засечка на 12 (тонкий намёк на дозор/время), справа — полноценные стрелки.</p>
<div class="row">
<div class="cell"><p class="lbl">plain — просто «o»</p>
<span class="wm f-space"><span class="am">G</span><svg class="dial" viewBox="0 0 100 100"><circle cx="50" cy="50" r="36" fill="none" stroke="#F7A80C" stroke-width="13"/></svg><span class="pe">Sentry</span></span>
</div>
<div class="cell"><p class="lbl">tick — засечка на 12</p>
<span class="wm f-space"><span class="am">G</span><svg class="dial" viewBox="0 0 100 100"><circle cx="50" cy="50" r="36" fill="none" stroke="#F7A80C" stroke-width="13"/><path d="M50 19 L50 32" stroke="#F7A80C" stroke-width="11" stroke-linecap="round"/><circle cx="50" cy="50" r="5" fill="#F7A80C"/></svg><span class="pe">Sentry</span></span>
</div>
<div class="cell"><p class="lbl">hands — стрелки <span class="rec">рек.</span></p>
<span class="wm f-space"><span class="am">G</span><svg class="dial" viewBox="0 0 100 100"><circle cx="50" cy="50" r="36" fill="none" stroke="#F7A80C" stroke-width="13"/><path d="M50 50 L50 28" stroke="#F7A80C" stroke-width="9" stroke-linecap="round"/><path d="M50 50 L67 58" stroke="#F7A80C" stroke-width="9" stroke-linecap="round"/><circle cx="50" cy="50" r="6" fill="#F7A80C"/></svg><span class="pe">Sentry</span></span>
</div>
</div>
</div></section>
<!-- face choice in context -->
<section><div class="wrap">
<div class="chead"><span class="num">02</span><h3 class="ctitle">Шрифт — теперь разница видна</h3></div>
<p class="cnote">Одна и та же деталь, три гарнитуры крупно. Смотри на «G», «S», «t», «y» — там весь характер. Space Grotesk — техничный и приметный; Sora — гладкий, нейтральный; Bricolage — самый выразительный, «человечный».</p>
<div class="faces">
<div class="frow"><span class="fn">Space Grotesk ★</span>
<span class="wm f-space"><span class="am">G</span><svg class="dial" viewBox="0 0 100 100"><circle cx="50" cy="50" r="36" fill="none" stroke="#F7A80C" stroke-width="13"/><path d="M50 50 L50 28" stroke="#F7A80C" stroke-width="9" stroke-linecap="round"/><path d="M50 50 L67 58" stroke="#F7A80C" stroke-width="9" stroke-linecap="round"/><circle cx="50" cy="50" r="6" fill="#F7A80C"/></svg><span class="pe">Sentry</span></span>
</div>
<div class="frow"><span class="fn">Sora</span>
<span class="wm f-sora"><span class="am">G</span><svg class="dial" viewBox="0 0 100 100"><circle cx="50" cy="50" r="36" fill="none" stroke="#F7A80C" stroke-width="13"/><path d="M50 50 L50 28" stroke="#F7A80C" stroke-width="9" stroke-linecap="round"/><path d="M50 50 L67 58" stroke="#F7A80C" stroke-width="9" stroke-linecap="round"/><circle cx="50" cy="50" r="6" fill="#F7A80C"/></svg><span class="pe">Sentry</span></span>
</div>
<div class="frow"><span class="fn">Bricolage</span>
<span class="wm f-bric"><span class="am">G</span><svg class="dial" viewBox="0 0 100 100"><circle cx="50" cy="50" r="36" fill="none" stroke="#F7A80C" stroke-width="13"/><path d="M50 50 L50 28" stroke="#F7A80C" stroke-width="9" stroke-linecap="round"/><path d="M50 50 L67 58" stroke="#F7A80C" stroke-width="9" stroke-linecap="round"/><circle cx="50" cy="50" r="6" fill="#F7A80C"/></svg><span class="pe">Sentry</span></span>
</div>
</div>
</div></section>
<div class="foot"><div class="wrap">Выбери уровень детали (plain / tick / hands) + шрифт — переведу «o»-циферблат и весь логотип в кривые и отдам чистый SVG (light/dark) + PNG.</div></div>
</body>
</html>
assets/logo/README.md
+41
View File
@@ -0,0 +1,41 @@
# GoSentry logo
Recommended wordmark variant from [`../gosentry-logo.html`](../gosentry-logo.html):
**Space Grotesk SemiBold** with an amber **G**, a **clock-dial "o"** (ring + hands),
and a petrol **"Sentry"**. The dial sits exactly in the `o` slot, so the schedule /
"watch" theme lives inside the letters instead of a bolt-on icon.
## Colors
| token | hex | use |
|--------|-----------|-----------------------------|
| amber | `#F7A80C` | `G`, dial ring + hands |
| petrol | `#0A4A58` | `Sentry` (light background) |
| white | `#FFFFFF` | `Sentry` (dark background) |
## Files
Vector (self-contained — glyphs are outlined to paths, no font required):
- `gosentry-logo.svg` — transparent, petrol `Sentry` (for light backgrounds)
- `gosentry-logo-dark.svg` — transparent, white `Sentry` (for dark backgrounds)
- `gosentry-logo-mono.svg` — single-color petrol
Raster (transparent PNG, aspect ≈ 4326×1034 ≈ 4.18:1):
- `gosentry-logo-{256,512,1024,2048}.png` — petrol `Sentry`
- `gosentry-logo-dark-{256,512,1024,2048}.png` — white `Sentry`
## Regenerating
Requires `fonttools` and `matplotlib`, plus the Space Grotesk variable font
(SIL OFL) instanced to weight 600 as `SpaceGrotesk-600.ttf`:
```sh
python gen_logo.py # writes SVGs into ./out
python raster.py # writes PNGs into ./out
```
`gen_logo.py` (SVG) and `raster.py` (PNG) share the same layout + dial geometry,
so both outputs stay identical. Space Grotesk is licensed under the SIL Open Font
License; outlining its glyphs into a logo is permitted.
assets/logo/gen_logo.py
+120
View File
@@ -0,0 +1,120 @@
#!/usr/bin/env python3
"""Generate GoSentry wordmark logo assets (recommended variant:
Space Grotesk SemiBold + amber 'G' + clock-dial 'o' with hands + 'Sentry')."""
import os
from fontTools.ttLib import TTFont
from fontTools.pens.svgPathPen import SVGPathPen
from fontTools.pens.transformPen import TransformPen
from fontTools.pens.boundsPen import BoundsPen
HERE = os.path.dirname(os.path.abspath(__file__))
OUT = os.path.join(HERE, "out")
os.makedirs(OUT, exist_ok=True)
AMBER = "#F7A80C"
PETROL = "#0A4A58"
WHITE = "#FFFFFF"
LS = -30 # letter-spacing -0.03em at 1000 upm
f = TTFont(os.path.join(HERE, "SpaceGrotesk-600.ttf"))
cmap = f.getBestCmap()
hmtx = f["hmtx"]
gs = f.getGlyphSet()
def glyph_path(ch, dx):
"""Return SVG path 'd' for ch, shifted by dx in font units (y still up)."""
g = cmap[ord(ch)]
pen = SVGPathPen(gs)
tpen = TransformPen(pen, (1, 0, 0, 1, dx, 0))
gs[g].draw(tpen)
return pen.getCommands(), hmtx[g][0]
def o_metrics():
g = cmap[ord("o")]
bp = BoundsPen(gs); gs[g].draw(bp)
xmin,ymin,xmax,ymax = bp.bounds
return hmtx[g][0], xmin, ymin, xmax, ymax
# ---- layout the wordmark ---------------------------------------------------
x = 0.0
G_d, adv = glyph_path("G", x); x += adv + LS
# dial occupies the 'o' advance slot
o_adv, oxmin, oymin, oxmax, oymax = o_metrics()
o_left = x
cx = o_left + (oxmin + oxmax) / 2.0
cy = (oymin + oymax) / 2.0
R = ((oxmax - oxmin) + (oymax - oymin)) / 4.0 # avg radius, matches the 'o'
x += o_adv + LS
sentry_d = []
for ch in "Sentry":
d, adv = glyph_path(ch, x)
sentry_d.append(d)
x += adv + LS
x -= LS # no trailing letter-spacing
SENTRY_D = " ".join(sentry_d)
# ---- dial geometry (matched to the 'o', proportions from the HTML mock) ----
SW = R * 0.30 # ring stroke width
Rmid = R - SW / 2.0 # centreline radius of ring
HW = R * 0.21 # hand width
hour_len = R * 0.54 # 12 o'clock hand
min_len = R * 0.46 # ~4 o'clock hand
min_ang = 62 # degrees clockwise from 12
import math
mx = cx + min_len * math.sin(math.radians(min_ang))
my = cy + min_len * math.cos(math.radians(min_ang)) # font-up: +y is up
cap = R * 0.14
dial = f'''<circle cx="{cx:.1f}" cy="{cy:.1f}" r="{Rmid:.1f}" fill="none" stroke="{AMBER}" stroke-width="{SW:.1f}"/>
<path d="M{cx:.1f} {cy:.1f} L{cx:.1f} {cy+hour_len:.1f}" stroke="{AMBER}" stroke-width="{HW:.1f}" stroke-linecap="round"/>
<path d="M{cx:.1f} {cy:.1f} L{mx:.1f} {my:.1f}" stroke="{AMBER}" stroke-width="{HW:.1f}" stroke-linecap="round"/>
<circle cx="{cx:.1f}" cy="{cy:.1f}" r="{cap:.1f}" fill="{AMBER}"/>'''
# ---- overall bounds (font units, y up) -------------------------------------
bp = BoundsPen(gs)
xall = 0.0
gG = cmap[ord("G")]; gs[gG].draw(TransformPen(bp,(1,0,0,1,0,0)))
xall += hmtx[gG][0] + LS + o_adv + LS
for ch in "Sentry":
g = cmap[ord(ch)]
gs[g].draw(TransformPen(bp,(1,0,0,1,xall,0)))
xall += hmtx[g][0] + LS
bx0,by0,bx1,by1 = bp.bounds
# include the dial extents
bx0 = min(bx0, cx-R-SW/2); bx1 = max(bx1, cx+R+SW/2)
by0 = min(by0, cy-R-SW/2); by1 = max(by1, cy+R+SW/2)
PAD = 60
W = (bx1 - bx0) + 2*PAD
H = (by1 - by0) + 2*PAD
# transform: font(x,y up) -> screen: translate then flip y
tx = PAD - bx0
ty = PAD + by1
transform = f"matrix(1 0 0 -1 {tx:.2f} {ty:.2f})"
def svg(sentry_color, bg=None, name=""):
bgrect = f'<rect width="{W:.1f}" height="{H:.1f}" fill="{bg}"/>\n' if bg else ""
return f'''<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 {W:.1f} {H:.1f}" role="img" aria-label="GoSentry">
{bgrect}<g transform="{transform}">
<path d="{G_d}" fill="{AMBER}"/>
<path d="{SENTRY_D}" fill="{sentry_color}"/>
{dial}
</g>
</svg>
'''
variants = {
"gosentry-logo.svg": svg(PETROL), # light bg, transparent
"gosentry-logo-dark.svg": svg(WHITE), # dark bg, transparent
"gosentry-logo-onlight.svg": svg(PETROL, bg="#FFFFFF"),
"gosentry-logo-ondark.svg": svg(WHITE, bg="#04262E"),
"gosentry-logo-mono.svg": svg(PETROL).replace(AMBER, PETROL), # single-colour petrol
}
for fn, data in variants.items():
with open(os.path.join(OUT, fn), "w", encoding="utf-8") as fh:
fh.write(data)
print("wrote", fn)
print("viewBox %.1f x %.1f" % (W, H))
assets/logo/gosentry-logo-1024.png
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 19 KiB

assets/logo/gosentry-logo-2048.png
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 41 KiB

assets/logo/gosentry-logo-256.png
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 4.8 KiB

assets/logo/gosentry-logo-512.png
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 9.3 KiB

assets/logo/gosentry-logo-dark-1024.png
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 18 KiB

assets/logo/gosentry-logo-dark-2048.png
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 38 KiB

assets/logo/gosentry-logo-dark-256.png
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 4.3 KiB

assets/logo/gosentry-logo-dark-512.png
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 8.5 KiB

assets/logo/gosentry-logo-dark.svg
+10
View File
@@ -0,0 +1,10 @@
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 4326.0 1034.0" role="img" aria-label="GoSentry">
<g transform="matrix(1 0 0 -1 8.00 774.00)">
<path d="M312.0 -14Q238.0 -14 179.5 18.5Q121.0 51 86.5 113.5Q52.0 176 52.0 267V433Q52.0 569 128.0 641.5Q204.0 714 332.0 714Q460.0 714 529.0 645.5Q598.0 577 598.0 461V457H480.0V465Q480.0 505 464.0 537.0Q448.0 569 415.0 587.5Q382.0 606 332.0 606Q258.0 606 215.5 560.5Q173.0 515 173.0 435V265Q173.0 186 215.5 139.0Q258.0 92 334.0 92Q410.0 92 445.0 133.0Q480.0 174 480.0 238V250H303.0V352H598.0V0H488.0V69H471.0Q463.0 51 446.0 31.5Q429.0 12 397.5 -1.0Q366.0 -14 312.0 -14Z" fill="#F7A80C"/>
<path d="M1524.0 -14Q1444.0 -14 1382.5 14.5Q1321.0 43 1286.0 97.0Q1251.0 151 1251.0 229V255H1370.0V229Q1370.0 160 1412.0 126.0Q1454.0 92 1524.0 92Q1595.0 92 1631.0 121.0Q1667.0 150 1667.0 196Q1667.0 227 1650.0 246.5Q1633.0 266 1600.5 278.0Q1568.0 290 1522.0 301L1492.0 307Q1423.0 323 1372.5 347.5Q1322.0 372 1295.0 411.0Q1268.0 450 1268.0 513Q1268.0 576 1298.0 621.0Q1328.0 666 1383.0 690.0Q1438.0 714 1512.0 714Q1586.0 714 1644.0 689.0Q1702.0 664 1735.5 614.0Q1769.0 564 1769.0 489V456H1650.0V489Q1650.0 532 1633.0 558.0Q1616.0 584 1585.0 596.0Q1554.0 608 1512.0 608Q1450.0 608 1418.0 584.0Q1386.0 560 1386.0 516Q1386.0 488 1400.5 468.5Q1415.0 449 1443.5 436.5Q1472.0 424 1515.0 415L1545.0 408Q1617.0 392 1671.0 367.5Q1725.0 343 1755.5 303.0Q1786.0 263 1786.0 199Q1786.0 136 1753.5 88.0Q1721.0 40 1662.5 13.0Q1604.0 -14 1524.0 -14Z M2091.0 -14Q2017.0 -14 1960.5 17.5Q1904.0 49 1872.5 106.5Q1841.0 164 1841.0 241V253Q1841.0 331 1872.0 388.0Q1903.0 445 1959.0 476.5Q2015.0 508 2088.0 508Q2160.0 508 2214.0 476.5Q2268.0 445 2298.0 388.0Q2328.0 331 2328.0 255V214H1957.0Q1959.0 156 1998.0 121.0Q2037.0 86 2094.0 86Q2150.0 86 2177.0 110.5Q2204.0 135 2218.0 166L2313.0 117Q2299.0 90 2272.5 59.5Q2246.0 29 2202.0 7.5Q2158.0 -14 2091.0 -14ZM1958.0 301H2211.0Q2207.0 350 2173.5 379.0Q2140.0 408 2087.0 408Q2032.0 408 1999.0 379.0Q1966.0 350 1958.0 301Z M2416.0 0V494H2529.0V425H2546.0Q2559.0 453 2593.0 478.0Q2627.0 503 2696.0 503Q2753.0 503 2797.0 477.0Q2841.0 451 2865.5 405.0Q2890.0 359 2890.0 296V0H2775.0V287Q2775.0 347 2745.5 376.5Q2716.0 406 2662.0 406Q2601.0 406 2566.0 365.5Q2531.0 325 2531.0 250V0Z M3189.0 0Q3141.0 0 3112.5 28.5Q3084.0 57 3084.0 106V399H2955.0V494H3084.0V653H3199.0V494H3341.0V399H3199.0V125Q3199.0 95 3227.0 95H3326.0V0Z M3428.0 0V494H3541.0V437H3558.0Q3569.0 468 3595.0 482.0Q3621.0 496 3657.0 496H3717.0V394H3655.0Q3605.0 394 3574.0 367.5Q3543.0 341 3543.0 286V0Z M3844.0 -200V-100H4117.0Q4145.0 -100 4145.0 -70V68H4128.0Q4120.0 50 4102.0 32.5Q4084.0 15 4054.0 3.5Q4024.0 -8 3978.0 -8Q3921.0 -8 3877.0 17.5Q3833.0 43 3809.0 89.5Q3785.0 136 3785.0 198V494H3899.0V207Q3899.0 147 3928.5 118.0Q3958.0 89 4012.0 89Q4073.0 89 4108.5 129.0Q4144.0 169 4144.0 244V494H4258.0V-94Q4258.0 -143 4230.0 -171.5Q4202.0 -200 4154.0 -200Z" fill="#FFFFFF"/>
<circle cx="937.5" cy="247.0" r="220.4" fill="none" stroke="#F7A80C" stroke-width="77.8"/>
<path d="M937.5 247.0 L937.5 387.0" stroke="#F7A80C" stroke-width="54.4" stroke-linecap="round"/>
<path d="M937.5 247.0 L1042.8 303.0" stroke="#F7A80C" stroke-width="54.4" stroke-linecap="round"/>
<circle cx="937.5" cy="247.0" r="36.3" fill="#F7A80C"/>
</g>
</svg>
Side by Side

After

Width:  |  Height:  |  Size: 3.2 KiB

assets/logo/gosentry-logo-mono.svg
+10
View File
@@ -0,0 +1,10 @@
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 4326.0 1034.0" role="img" aria-label="GoSentry">
<g transform="matrix(1 0 0 -1 8.00 774.00)">
<path d="M312.0 -14Q238.0 -14 179.5 18.5Q121.0 51 86.5 113.5Q52.0 176 52.0 267V433Q52.0 569 128.0 641.5Q204.0 714 332.0 714Q460.0 714 529.0 645.5Q598.0 577 598.0 461V457H480.0V465Q480.0 505 464.0 537.0Q448.0 569 415.0 587.5Q382.0 606 332.0 606Q258.0 606 215.5 560.5Q173.0 515 173.0 435V265Q173.0 186 215.5 139.0Q258.0 92 334.0 92Q410.0 92 445.0 133.0Q480.0 174 480.0 238V250H303.0V352H598.0V0H488.0V69H471.0Q463.0 51 446.0 31.5Q429.0 12 397.5 -1.0Q366.0 -14 312.0 -14Z" fill="#0A4A58"/>
<path d="M1524.0 -14Q1444.0 -14 1382.5 14.5Q1321.0 43 1286.0 97.0Q1251.0 151 1251.0 229V255H1370.0V229Q1370.0 160 1412.0 126.0Q1454.0 92 1524.0 92Q1595.0 92 1631.0 121.0Q1667.0 150 1667.0 196Q1667.0 227 1650.0 246.5Q1633.0 266 1600.5 278.0Q1568.0 290 1522.0 301L1492.0 307Q1423.0 323 1372.5 347.5Q1322.0 372 1295.0 411.0Q1268.0 450 1268.0 513Q1268.0 576 1298.0 621.0Q1328.0 666 1383.0 690.0Q1438.0 714 1512.0 714Q1586.0 714 1644.0 689.0Q1702.0 664 1735.5 614.0Q1769.0 564 1769.0 489V456H1650.0V489Q1650.0 532 1633.0 558.0Q1616.0 584 1585.0 596.0Q1554.0 608 1512.0 608Q1450.0 608 1418.0 584.0Q1386.0 560 1386.0 516Q1386.0 488 1400.5 468.5Q1415.0 449 1443.5 436.5Q1472.0 424 1515.0 415L1545.0 408Q1617.0 392 1671.0 367.5Q1725.0 343 1755.5 303.0Q1786.0 263 1786.0 199Q1786.0 136 1753.5 88.0Q1721.0 40 1662.5 13.0Q1604.0 -14 1524.0 -14Z M2091.0 -14Q2017.0 -14 1960.5 17.5Q1904.0 49 1872.5 106.5Q1841.0 164 1841.0 241V253Q1841.0 331 1872.0 388.0Q1903.0 445 1959.0 476.5Q2015.0 508 2088.0 508Q2160.0 508 2214.0 476.5Q2268.0 445 2298.0 388.0Q2328.0 331 2328.0 255V214H1957.0Q1959.0 156 1998.0 121.0Q2037.0 86 2094.0 86Q2150.0 86 2177.0 110.5Q2204.0 135 2218.0 166L2313.0 117Q2299.0 90 2272.5 59.5Q2246.0 29 2202.0 7.5Q2158.0 -14 2091.0 -14ZM1958.0 301H2211.0Q2207.0 350 2173.5 379.0Q2140.0 408 2087.0 408Q2032.0 408 1999.0 379.0Q1966.0 350 1958.0 301Z M2416.0 0V494H2529.0V425H2546.0Q2559.0 453 2593.0 478.0Q2627.0 503 2696.0 503Q2753.0 503 2797.0 477.0Q2841.0 451 2865.5 405.0Q2890.0 359 2890.0 296V0H2775.0V287Q2775.0 347 2745.5 376.5Q2716.0 406 2662.0 406Q2601.0 406 2566.0 365.5Q2531.0 325 2531.0 250V0Z M3189.0 0Q3141.0 0 3112.5 28.5Q3084.0 57 3084.0 106V399H2955.0V494H3084.0V653H3199.0V494H3341.0V399H3199.0V125Q3199.0 95 3227.0 95H3326.0V0Z M3428.0 0V494H3541.0V437H3558.0Q3569.0 468 3595.0 482.0Q3621.0 496 3657.0 496H3717.0V394H3655.0Q3605.0 394 3574.0 367.5Q3543.0 341 3543.0 286V0Z M3844.0 -200V-100H4117.0Q4145.0 -100 4145.0 -70V68H4128.0Q4120.0 50 4102.0 32.5Q4084.0 15 4054.0 3.5Q4024.0 -8 3978.0 -8Q3921.0 -8 3877.0 17.5Q3833.0 43 3809.0 89.5Q3785.0 136 3785.0 198V494H3899.0V207Q3899.0 147 3928.5 118.0Q3958.0 89 4012.0 89Q4073.0 89 4108.5 129.0Q4144.0 169 4144.0 244V494H4258.0V-94Q4258.0 -143 4230.0 -171.5Q4202.0 -200 4154.0 -200Z" fill="#0A4A58"/>
<circle cx="937.5" cy="247.0" r="220.4" fill="none" stroke="#0A4A58" stroke-width="77.8"/>
<path d="M937.5 247.0 L937.5 387.0" stroke="#0A4A58" stroke-width="54.4" stroke-linecap="round"/>
<path d="M937.5 247.0 L1042.8 303.0" stroke="#0A4A58" stroke-width="54.4" stroke-linecap="round"/>
<circle cx="937.5" cy="247.0" r="36.3" fill="#0A4A58"/>
</g>
</svg>
Side by Side

After

Width:  |  Height:  |  Size: 3.2 KiB

assets/logo/gosentry-logo.svg
+10
View File
@@ -0,0 +1,10 @@
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 4326.0 1034.0" role="img" aria-label="GoSentry">
<g transform="matrix(1 0 0 -1 8.00 774.00)">
<path d="M312.0 -14Q238.0 -14 179.5 18.5Q121.0 51 86.5 113.5Q52.0 176 52.0 267V433Q52.0 569 128.0 641.5Q204.0 714 332.0 714Q460.0 714 529.0 645.5Q598.0 577 598.0 461V457H480.0V465Q480.0 505 464.0 537.0Q448.0 569 415.0 587.5Q382.0 606 332.0 606Q258.0 606 215.5 560.5Q173.0 515 173.0 435V265Q173.0 186 215.5 139.0Q258.0 92 334.0 92Q410.0 92 445.0 133.0Q480.0 174 480.0 238V250H303.0V352H598.0V0H488.0V69H471.0Q463.0 51 446.0 31.5Q429.0 12 397.5 -1.0Q366.0 -14 312.0 -14Z" fill="#F7A80C"/>
<path d="M1524.0 -14Q1444.0 -14 1382.5 14.5Q1321.0 43 1286.0 97.0Q1251.0 151 1251.0 229V255H1370.0V229Q1370.0 160 1412.0 126.0Q1454.0 92 1524.0 92Q1595.0 92 1631.0 121.0Q1667.0 150 1667.0 196Q1667.0 227 1650.0 246.5Q1633.0 266 1600.5 278.0Q1568.0 290 1522.0 301L1492.0 307Q1423.0 323 1372.5 347.5Q1322.0 372 1295.0 411.0Q1268.0 450 1268.0 513Q1268.0 576 1298.0 621.0Q1328.0 666 1383.0 690.0Q1438.0 714 1512.0 714Q1586.0 714 1644.0 689.0Q1702.0 664 1735.5 614.0Q1769.0 564 1769.0 489V456H1650.0V489Q1650.0 532 1633.0 558.0Q1616.0 584 1585.0 596.0Q1554.0 608 1512.0 608Q1450.0 608 1418.0 584.0Q1386.0 560 1386.0 516Q1386.0 488 1400.5 468.5Q1415.0 449 1443.5 436.5Q1472.0 424 1515.0 415L1545.0 408Q1617.0 392 1671.0 367.5Q1725.0 343 1755.5 303.0Q1786.0 263 1786.0 199Q1786.0 136 1753.5 88.0Q1721.0 40 1662.5 13.0Q1604.0 -14 1524.0 -14Z M2091.0 -14Q2017.0 -14 1960.5 17.5Q1904.0 49 1872.5 106.5Q1841.0 164 1841.0 241V253Q1841.0 331 1872.0 388.0Q1903.0 445 1959.0 476.5Q2015.0 508 2088.0 508Q2160.0 508 2214.0 476.5Q2268.0 445 2298.0 388.0Q2328.0 331 2328.0 255V214H1957.0Q1959.0 156 1998.0 121.0Q2037.0 86 2094.0 86Q2150.0 86 2177.0 110.5Q2204.0 135 2218.0 166L2313.0 117Q2299.0 90 2272.5 59.5Q2246.0 29 2202.0 7.5Q2158.0 -14 2091.0 -14ZM1958.0 301H2211.0Q2207.0 350 2173.5 379.0Q2140.0 408 2087.0 408Q2032.0 408 1999.0 379.0Q1966.0 350 1958.0 301Z M2416.0 0V494H2529.0V425H2546.0Q2559.0 453 2593.0 478.0Q2627.0 503 2696.0 503Q2753.0 503 2797.0 477.0Q2841.0 451 2865.5 405.0Q2890.0 359 2890.0 296V0H2775.0V287Q2775.0 347 2745.5 376.5Q2716.0 406 2662.0 406Q2601.0 406 2566.0 365.5Q2531.0 325 2531.0 250V0Z M3189.0 0Q3141.0 0 3112.5 28.5Q3084.0 57 3084.0 106V399H2955.0V494H3084.0V653H3199.0V494H3341.0V399H3199.0V125Q3199.0 95 3227.0 95H3326.0V0Z M3428.0 0V494H3541.0V437H3558.0Q3569.0 468 3595.0 482.0Q3621.0 496 3657.0 496H3717.0V394H3655.0Q3605.0 394 3574.0 367.5Q3543.0 341 3543.0 286V0Z M3844.0 -200V-100H4117.0Q4145.0 -100 4145.0 -70V68H4128.0Q4120.0 50 4102.0 32.5Q4084.0 15 4054.0 3.5Q4024.0 -8 3978.0 -8Q3921.0 -8 3877.0 17.5Q3833.0 43 3809.0 89.5Q3785.0 136 3785.0 198V494H3899.0V207Q3899.0 147 3928.5 118.0Q3958.0 89 4012.0 89Q4073.0 89 4108.5 129.0Q4144.0 169 4144.0 244V494H4258.0V-94Q4258.0 -143 4230.0 -171.5Q4202.0 -200 4154.0 -200Z" fill="#0A4A58"/>
<circle cx="937.5" cy="247.0" r="220.4" fill="none" stroke="#F7A80C" stroke-width="77.8"/>
<path d="M937.5 247.0 L937.5 387.0" stroke="#F7A80C" stroke-width="54.4" stroke-linecap="round"/>
<path d="M937.5 247.0 L1042.8 303.0" stroke="#F7A80C" stroke-width="54.4" stroke-linecap="round"/>
<circle cx="937.5" cy="247.0" r="36.3" fill="#F7A80C"/>
</g>
</svg>
Side by Side

After

Width:  |  Height:  |  Size: 3.2 KiB

assets/logo/raster.py
+97
View File
@@ -0,0 +1,97 @@
#!/usr/bin/env python3
"""Rasterize the GoSentry wordmark to PNG at several widths, reusing the
same font outlines + dial geometry as gen_logo.py (no SVG rasterizer needed)."""
import os, math
import matplotlib
matplotlib.use("Agg")
import matplotlib.pyplot as plt
from matplotlib.path import Path
from matplotlib.patches import PathPatch, Circle
from matplotlib.lines import Line2D
from fontTools.ttLib import TTFont
from fontTools.pens.basePen import BasePen
from fontTools.pens.boundsPen import BoundsPen
from fontTools.pens.transformPen import TransformPen
HERE = os.path.dirname(os.path.abspath(__file__))
OUT = os.path.join(HERE, "out"); os.makedirs(OUT, exist_ok=True)
AMBER, PETROL, WHITE = "#F7A80C", "#0A4A58", "#FFFFFF"
LS = -30
f = TTFont(os.path.join(HERE, "SpaceGrotesk-600.ttf"))
cmap, hmtx, gs = f.getBestCmap(), f["hmtx"], f.getGlyphSet()
class MplPen(BasePen):
def __init__(self, glyphSet):
super().__init__(glyphSet); self.v=[]; self.c=[]
def _moveTo(self,p): self.v.append(p); self.c.append(Path.MOVETO)
def _lineTo(self,p): self.v.append(p); self.c.append(Path.LINETO)
def _curveToOne(self,p1,p2,p3):
self.v += [p1,p2,p3]; self.c += [Path.CURVE4]*3
def _qCurveToOne(self,p1,p2):
self.v += [p1,p2]; self.c += [Path.CURVE3]*2
def _closePath(self):
self.v.append((0,0)); self.c.append(Path.CLOSEPOLY)
def glyph_mplpath(ch, dx):
pen = MplPen(gs)
gs[cmap[ord(ch)]].draw(TransformPen(pen,(1,0,0,1,dx,0)))
return Path(pen.v, pen.c), hmtx[cmap[ord(ch)]][0]
# layout
x=0.0
paths_amber=[]; paths_petrol=[]
p,adv = glyph_mplpath("G",x); paths_amber.append(p); x+=adv+LS
og=cmap[ord("o")]; bp=BoundsPen(gs); gs[og].draw(bp)
oxmin,oymin,oxmax,oymax=bp.bounds; o_adv=hmtx[og][0]
cx=x+(oxmin+oxmax)/2; cy=(oymin+oymax)/2
R=((oxmax-oxmin)+(oymax-oymin))/4
x+=o_adv+LS
for ch in "Sentry":
p,adv=glyph_mplpath(ch,x); paths_petrol.append(p); x+=adv+LS
x-=LS
SW=R*0.30; Rmid=R-SW/2; HW=R*0.21
hour_len=R*0.54; min_len=R*0.46; ang=math.radians(62)
mx=cx+min_len*math.sin(ang); my=cy+min_len*math.cos(ang); cap=R*0.14
# bounds
allb=BoundsPen(gs); gs[cmap[ord('G')]].draw(allb)
xx=hmtx[cmap[ord('G')]][0]+LS+o_adv+LS
for ch in "Sentry":
gs[cmap[ord(ch)]].draw(TransformPen(allb,(1,0,0,1,xx,0))); xx+=hmtx[cmap[ord(ch)]][0]+LS
bx0,by0,bx1,by1=allb.bounds
bx0=min(bx0,cx-R-SW/2); bx1=max(bx1,cx+R+SW/2)
by0=min(by0,cy-R-SW/2); by1=max(by1,cy+R+SW/2)
PAD=60
X0,X1=bx0-PAD,bx1+PAD; Y0,Y1=by0-PAD,by1+PAD
W=X1-X0; H=Y1-Y0
def render(path_png, width_px, sentry_color, bg=None, mono=False):
dpi=100
fw=width_px/dpi; fh=fw*H/W
fig=plt.figure(figsize=(fw,fh),dpi=dpi)
ax=fig.add_axes([0,0,1,1]); ax.set_xlim(X0,X1); ax.set_ylim(Y0,Y1)
ax.set_aspect('equal'); ax.axis('off')
if bg: fig.patch.set_facecolor(bg); ax.set_facecolor(bg)
else: fig.patch.set_alpha(0)
amberc = sentry_color if mono else AMBER
for p in paths_amber: ax.add_patch(PathPatch(p,facecolor=amberc,edgecolor='none',antialiased=True))
for p in paths_petrol: ax.add_patch(PathPatch(p,facecolor=sentry_color,edgecolor='none',antialiased=True))
pt_per_unit = fw/W*72
ax.add_patch(Circle((cx,cy),Rmid,fill=False,edgecolor=amberc,linewidth=SW*pt_per_unit))
for (ex,ey) in [(cx,cy+hour_len),(mx,my)]:
ax.add_line(Line2D([cx,ex],[cy,ey],color=amberc,linewidth=HW*pt_per_unit,
solid_capstyle='round'))
ax.add_patch(Circle((cx,cy),cap,facecolor=amberc,edgecolor='none'))
fig.savefig(path_png,dpi=dpi,transparent=(bg is None))
plt.close(fig)
print("wrote",os.path.basename(path_png))
for w in (256,512,1024,2048):
render(os.path.join(OUT,f"gosentry-logo-{w}.png"),w,PETROL)
render(os.path.join(OUT,f"gosentry-logo-dark-{w}.png"),w,WHITE)
render(os.path.join(OUT,"gosentry-logo-onlight-1024.png"),1024,PETROL,bg="#FFFFFF")
render(os.path.join(OUT,"gosentry-logo-ondark-1024.png"),1024,WHITE,bg="#04262E")
render(os.path.join(OUT,"gosentry-logo-mono-1024.png"),1024,PETROL,mono=True)
print(f"aspect {W:.0f}x{H:.0f}")
docs/ARCHITECTURE.md
+235 -30
View File
@@ -14,10 +14,11 @@ src/
app/ Service — sole owner of job/runtime state; emits typed Events app/ Service — sole owner of job/runtime state; emits typed Events
scheduler/ pure timing loop; calls app.Service.RunDue on every tick scheduler/ pure timing loop; calls app.Service.RunDue on every tick
runner/ shell command execution + log file writing + cleanup runner/ shell command execution + log file writing + cleanup
storage/ YAML persistence (gosentry.yaml, jobs.yaml) storage/ JSON persistence (gosentry.json, jobs.json)
platform/ platform/
autostart/ Manager interface + Windows (shortcut) and Linux (XDG) impls autostart/ Manager interface + Windows (shortcut) and Linux (XDG) impls
desktop/ display-scale helper (Linux only) desktop/ desktop entry + icon under XDG data home (Linux only)
filemanager/ open a folder in the desktop file manager
winproc/ hidden-window startup flags (Windows only) winproc/ hidden-window startup flags (Windows only)
ui/ Fyne windows, tabs, and dialogs; reads service via Events ui/ Fyne windows, tabs, and dialogs; reads service via Events
``` ```
@@ -27,20 +28,20 @@ src/
```mermaid ```mermaid
flowchart LR flowchart LR
user["Desktop user"] user["Desktop user"]
ui["src/ui\nFyne windows, tabs, dialogs"] ui["src/ui - Fyne windows, tabs, dialogs"]
svc["src/app Service\nsole owner of job + runtime state"] svc["src/app Service - sole owner of job + runtime state"]
store["src/storage Store\nYAML config and jobs"] store["src/storage Store - JSON config and jobs"]
sched["src/scheduler Scheduler\npure timing loop"] sched["src/scheduler Scheduler - pure timing loop"]
runner["src/runner\nshell command execution"] runner["src/runner - shell command execution"]
autostart["src/platform/autostart Manager\nWindows shortcut / Linux XDG"] autostart["src/platform/autostart Manager - Windows shortcut / Linux XDG"]
config["gosentry.yaml\napplication settings"] config["gosentry.json - application settings"]
jobs["jobs.yaml\njob definitions"] jobs["jobs.json - job definitions"]
logs["logs_dir\nper-run command output logs"] logs["logs_dir - per-run command output logs"]
shell["Platform shell\ncmd.exe /C or sh -c"] shell["Platform shell - cmd.exe /C or sh -c"]
user -->|"edits jobs, settings, runs commands"| ui user -->|"edits jobs, settings, runs commands"| ui
ui -->|"CreateJob, UpdateJob, DeleteJob, RunNow, UpdateSettings, …"| svc ui -->|"CreateJob, UpdateJob, DeleteJob, RunNow, UpdateSettings, AutostartStatus, …"| svc
svc -->|"SaveJobs, SaveConfig, LoadJobs, LoadConfig"| store svc -->|"OpenStore, PrepareSaveJobs, PrepareSaveConfig, LoadJobsFile"| store
store -->|"read/write"| config store -->|"read/write"| config
store -->|"read/write"| jobs store -->|"read/write"| jobs
@@ -50,20 +51,83 @@ flowchart LR
runner -->|"execute command"| shell runner -->|"execute command"| shell
runner -->|"write stdout/stderr log"| logs runner -->|"write stdout/stderr log"| logs
runner -->|"RunRecord"| svc runner -->|"RunRecord"| svc
svc -->|"emit JobChanged / RunRecorded / ErrorOccurred"| ui svc -->|"emit JobChanged / RunRecorded / JobsLoaded / ErrorOccurred"| ui
ui -->|"display jobs, history, status"| user ui -->|"display jobs, history, status"| user
ui -->|"SetAutostart, AutostartStatus"| autostart
svc -->|"Set / Status via Manager"| autostart svc -->|"Set / Status via Manager"| autostart
``` ```
## Platform layer
GoSentry ships one binary per target OS. Platform-specific code is not a
workaround for missing cross-platform support — it **is** the cross-platform
strategy: shared interfaces and call sites, with OS-specific implementations
selected at **compile time** (`*_windows.go`, `//go:build linux`, and similar).
Runtime `runtime.GOOS` checks appear only for small UI details (see below), not
for autostart, file-manager integration, or command invocation.
Callers (`app.Service`, `ui`, `runner`) depend on the shared API; they do not
branch on the operating system.
| Package / file | Windows | Linux | Other (`!windows && !linux`) |
| --- | --- | --- | --- |
| `platform/autostart` | Startup-folder `.lnk` shortcut | XDG `~/.config/autostart/gosentry.desktop` | Stub — `Set` returns an error when enabled |
| `platform/desktop` | no-op | Installs `.desktop` + icon under XDG data home | no-op |
| `platform/filemanager` | `explorer` | `xdg-open` | Unsupported — `Open` returns an error |
| `platform/winproc` | `CREATE_NO_WINDOW` / `HideWindow` on child processes | no-op | no-op |
| `runner/invocation_*` | `cmd.exe /S /C` with Windows-safe quoting | `sh -c` | `sh -c` (same as Linux) |
**Why separate implementations are required**
- **Autostart** — each OS defines its own login startup mechanism (shortcut,
XDG Autostart, LaunchAgents on macOS). There is no portable API in Go, Fyne, or
the standard library; a third-party helper would still wrap the same per-OS
code behind an interface.
- **Opening a folder** — the desktop shell exposes no shared “reveal in file
manager” call; each platform invokes its registered handler (`explorer`,
`xdg-open`, `open` on macOS).
- **Command shell** — users expect OS-native semantics (`cmd.exe` batch files,
`%VAR%`, and path rules on Windows; POSIX `sh` on Linux). A single shell for
all platforms would break commands on one side or the other.
- **Hidden console window** — launching a child process from a GUI app can flash
a console on Windows only; Linux and macOS do not need equivalent flags.
**Deliberate platform choices (not OS API limits)**
- **Window and tray icons** — Fyne accepts icons on every platform, but Windows
renders the notification area and titlebar from multi-size `.ico` resources
(embedded via `packaging/windows/gosentry.rc`), while Linux StatusNotifier
trays scale better from a larger PNG. `ui/run.go` and `ui/tray.go` branch on
`runtime.GOOS` for asset selection only.
- **Sample job commands** in `storage/store.go` — demo `echo` lines differ only
because shell quoting rules differ; real jobs are user-authored per platform.
**Adding new platform code**
- Put OS integration in `src/platform/<name>/` with a small shared API, or use
`*_GOOS.go` files in the owning package when the surface is a single function
(as in `runner/invocation_*`).
- Do not scatter `runtime.GOOS` through `app.Service` or UI business logic.
- Unsupported platforms get an explicit stub (return an error or no-op) rather
than silently doing nothing — see `autostart_other.go` and
`filemanager_other.go`.
macOS autostart and file-manager handlers are not implemented yet; see
[ROADMAP.md](ROADMAP.md) for blocked or deferred cross-platform work (for
example window-maximized detection, which would need per-OS native calls).
## Main Flows ## Main Flows
1. Startup: 1. Startup:
`cmd/gosentry` calls `ui.Run`, which creates an `app.Service`, opens the `cmd/gosentry` calls `ui.Run`, which owns the process lifecycle: it calls
store, loads `gosentry.yaml` and `jobs.yaml`, subscribes the UI to service `app.Open()` to open the store, load `gosentry.json` and `jobs.json`, and
events, builds the main window, and calls `Service.Start` to begin the build the `app.Service`, then hands that Service to `newMainView`
scheduler loop. (`mainwindow.go`), which subscribes the UI to service events and calls
`Service.Start` to begin the scheduler loop before assembling the tabs.
`Run` shows the window and, on quit, calls `Service.Stop`.
On every launch the service seeds per-job run-time statistics
from existing log files so the details panel reflects accumulated history
immediately (see §Statistics below).
2. Editing settings or jobs: 2. Editing settings or jobs:
The UI calls mutating methods on `app.Service` (e.g. `CreateJob`, The UI calls mutating methods on `app.Service` (e.g. `CreateJob`,
@@ -72,6 +136,17 @@ flowchart LR
`Event`. The UI's observer receives the event and refreshes the relevant `Event`. The UI's observer receives the event and refreshes the relevant
widget on the main thread via `fyne.Do`. widget on the main thread via `fyne.Do`.
`UpdateSettings` has one extra step: when the configured jobs file changes
and a file already exists at the new path, that file is authoritative. The
Service loads it, calls `adoptJobsLocked` to rebuild the jobs slice, runtime
map, schedule cache, and next-run times around it, applies the statistics
seeded from the new logs directory, and emits `JobsLoaded` plus a broad
`JobChanged`. A path with no file behind it receives the current jobs instead.
Adoption drops all runtime state, so it is refused while a job is running.
Reading the new file and seeding its statistics both happen before `mu` is
taken (the no-I/O-under-`mu` rule in [STANDARDS.md](STANDARDS.md)), so the
running-job check is re-evaluated under the lock before anything is replaced.
3. Scheduled run: 3. Scheduled run:
`scheduler.Scheduler` fires a tick every second. On each tick it calls `scheduler.Scheduler` fires a tick every second. On each tick it calls
`Service.RunDue(now)`. The Service checks which enabled, non-paused jobs are `Service.RunDue(now)`. The Service checks which enabled, non-paused jobs are
@@ -79,26 +154,156 @@ flowchart LR
4. Manual run: 4. Manual run:
`Run now` in the UI calls `Service.RunNow`. The Service checks that the job `Run now` in the UI calls `Service.RunNow`. The Service checks that the job
exists, is not already running, and that the scheduler is not paused, then exists, is not already running, and (in sequential mode) that no other job is
executes `runner.RunJob` with the `Manual` trigger. running, then executes `runner.RunJob` with the `Manual` trigger. Manual runs
are allowed even while the scheduler is globally paused.
5. Command execution: 5. Command execution:
`runner.RunJob` builds the platform-specific invocation, executes the `runner.RunJob` builds the platform-specific invocation, executes the
command through the platform shell, captures stdout and stderr, writes one command through the platform shell under the caller-supplied timeout, captures
timestamped `.log` file, and returns a `domain.RunRecord`. stdout and stderr, writes one timestamped `.log` file, and returns a
`domain.RunRecord` containing
`DurationMS` (wall-clock milliseconds from start to finish; for `StartOnly`
fire-and-forget jobs it measures launch latency — the time to spawn the
process — since there is no exit to wait for).
6. History update: 6. History update:
When a run goroutine completes, `Service` updates the job's runtime, saves When a run goroutine completes, `Service` updates the job's runtime
YAML, triggers log cleanup, and emits `RunRecorded`. The UI observer appends (including the statistics aggregate) under `mu`, then — after releasing it —
the record to the History tab. runs log cleanup and emits `RunRecorded`. Nothing is saved: a run changes only
`JobRuntime`, which is never persisted. The UI observer appends the record to the History tab.
History rows exist only for the current process session; restarting the app
clears the table (aggregate stats in the details panel are still seeded from
log files).
7. Autostart: 7. Autostart:
`UpdateSettings` in the Service calls `autostart.Manager.Set`. The Manager `UpdateSettings` in the Service calls `autostart.Manager.Set`. The Manager
interface has two implementations: Windows writes a `.lnk` shortcut to the interface has two implementations: Windows writes a `.lnk` shortcut to the
user Startup folder; Linux writes an XDG Autostart `.desktop` file. Both user Startup folder; Linux writes an XDG Autostart `.desktop` file. When
entries pass `--start-in-tray`. `KeepRunningInTray` is enabled the entry passes `--start-in-tray`; when it is
off the entry launches the executable without that flag so the main window
opens after sign-in.
8. Error surfacing: 8. Error surfacing:
Background errors (failed YAML saves, cleanup errors) are emitted as Background errors (failed JSON saves, cleanup errors) are emitted as
`ErrorOccurred` events and displayed in the UI status area, rather than `ErrorOccurred` events and displayed in the UI status area, rather than
being silently discarded. being silently discarded.
## Key Domain Concepts
### Per-job overlap policy
`domain.Job` carries an `OverlapPolicy` field (`json:"overlap_policy,omitempty"`).
When non-empty it overrides the global `Config.OverlapPolicy` for that job alone.
Empty means inherit the global default. `app.Service.RunDue` resolves the
effective policy per job: it uses `job.OverlapPolicy` when set, otherwise falls
back to `store.Config.OverlapPolicy`. `normalizeJob` in `app/operations.go` leaves
the field empty on new jobs so the inherit semantics are preserved.
Under the `"queue"` policy, each occurrence that fires while a run is still
in flight increments `JobRuntime.PendingRuns`. When the current run finishes,
`executeRun` drains the counter by starting one deferred run per completion until
`PendingRuns` reaches zero.
### Per-job command timeout
`domain.Job` carries a `TimeoutSeconds *int` field
(`json:"timeout_seconds,omitempty"`), following the same inherit pattern as the
overlap policy. It is a **pointer** because the setting has three states that
must stay distinguishable on disk:
| `Job.TimeoutSeconds` | jobs.json | Meaning |
| --- | --- | --- |
| `nil` | field absent | inherit `Config.DefaultTimeoutSeconds` |
| `0` | `"timeout_seconds": 0` | no timeout, does **not** inherit |
| `> 0` | `"timeout_seconds": 45` | per-job limit in seconds |
The global `Config.DefaultTimeoutSeconds` (default **0**, i.e. no timeout) is
written unconditionally — no `omitempty` — for the same reason: `0` there is a
deliberate choice, not a missing value, and `storage.loadOrCreateConfig` must not
normalize it away. `app.Service.effectiveTimeout`
resolves the effective duration under `mu` and `startRunLocked` snapshots it into
`runEnv.timeout`. `runner.RunJob(ctx, job, trigger, logsDir, timeout)` takes the
resolved duration as an argument, so the runner stays ignorant of the global
config: a positive duration applies the timeout via `context.WithTimeout` and
reports `Timed out after <timeout>` on expiry; a non-positive duration runs
without a deadline, bounded only by `ctx` (app shutdown). `StartOnly` jobs are
built on `context.Background()` instead — neither the timeout nor app shutdown
applies to them — and so measure launch latency only.
### Run-time statistics
`domain.JobRuntime` holds a rolling aggregate updated after each run:
| Field | Meaning |
|-------|---------|
| `RunCount` | total runs recorded |
| `FailCount` | runs that exited non-zero |
| `LastDurationMS` | wall-clock time of the most recent run (launch latency for `StartOnly`) |
| `AvgDurationMS` | mean over all runs with a recorded duration, computed as `DurationSumMS / TimedRunCount` on every update rather than folded incrementally, so it never disagrees with the exact sum/count average `runner.aggregateLogStats` computes when seeding from logs |
| `MaxDurationMS` | longest recorded run |
| `TimedRunCount` | runs that carried a duration, and so contributed to the aggregates above; a legacy log without a `duration` header counts toward `RunCount` but not this |
| `DurationSumMS` | running total of every timed run's duration; the source `AvgDurationMS` is divided from |
`runner.RunJob` measures the wall-clock start→finish and sets `DurationMS` on
the returned `RunRecord`. `runner/logfile.go` writes a `duration` line into the
log file header alongside the existing `state` line.
On startup, `runner.SeedStats` scans log files (matched primarily by the
`job_id` header, with a sanitized-name filename fallback for legacy logs,
bounded by `Config.MaxLogFiles`) and folds the parsed `state`/`duration`
headers into a `runner.SeededStats` map. `NewService` applies those seeds to
the runtime map before the first scheduler tick, so the details panel shows
accumulated run history immediately after a restart.
Older log files that pre-date the `duration` header are tolerated: the run is
counted but the timing is skipped.
`JobRuntime.Logs` (per-run `RunRecord` entries shown in the History tab) is
**session-only**: it is not written to `jobs.json` and is not rebuilt from
`.log` files on startup. Log files on disk feed aggregate counters via
`SeedStats` only. See [STANDARDS.md](STANDARDS.md).
### Persisted global pause
`domain.Config` carries a `Paused bool` field (`json:"paused,omitempty"`).
`app.Service.SetGlobalPause` writes the new value into `store.Config` and calls
`SaveConfig`, so the paused state survives a restart. `NewService` initialises
`s.paused` from `store.Config.Paused` and applies the paused next-run text to
all runtimes before the first tick, ensuring the UI shows the correct state from
the moment the window opens.
### `jobs_view.go` file structure
The size guideline for a file in this project is ~250 lines.
`src/ui/jobs_view.go` is split across six files along these seams:
| File | Contents |
|------|----------|
| `jobs_view.go` | `jobsView` struct — construction, `refresh`, `updateDetails`, the pause control, and layout assembly |
| `jobs_view_state.go` | `jobsViewState` — the jobs/runtime snapshot, the folder filter, and the selection |
| `jobs_view_list.go` | The sidebar list: row template, row rendering, row mode, and the compact/detailed toggle |
| `jobs_view_toolbar.go` | The per-job button row — new, edit, run, pause, delete |
| `jobs_view_details.go` | `detailsPanel` struct — widget creation, `update`, `clear`, `container` |
| `jobs_view_helpers.go` | Pure helpers — `filteredJobIndexes`, `folderOptions`, `filterValue`, `indexOfID`, `lastJobLogs`, `nextJobListView`, `viewToggleText` |
The widgets hold no job state of their own: they read `jobsViewState`, which is
the only thing that reads the Service. The **selection is a job ID, not a row
index.** Every path that changes the job list replaces the state's snapshot —
create, delete, and edit from this view's own handlers, adopting a different
jobs file from the Service, which the view only learns about through the refresh
`JobsLoaded` triggers. An index that outlives its snapshot points at whichever
job now sits there, so the details pane would describe one job while the list
highlighted another. Rows are derived from the ID at render time
(`selectedIndex`, `displayRow`), and `jobsView.refresh` ends by pointing the
list's highlight at the selected job.
### `settings_view.go` file structure
`src/ui/settings_view.go` is split across three files the same way, once its
own size passed the guideline:
| File | Contents |
|------|----------|
| `settings_view.go` | `settingsView` — field construction, save, load, validate; the Theme label translation helpers |
| `settings_view_layout.go` | `newSettingsLayout`, `settingsSection`, `settingsRow` — the two-column arrangement and the button row |
| `settings_view_helpers.go` | Pure helpers — `fyneVersion`, `mustParseURL`, `settingsFolderPath`, `openFolder`, `chooseFile`/`chooseJSONFile`, `chooseFolder` (`chooseFile` also backs `job_dialog.go`'s command browser) |
docs/CHANGELOG.md
+761 -7
View File
@@ -2,15 +2,769 @@
All notable GoSentry changes are recorded in this file. All notable GoSentry changes are recorded in this file.
## 0.9.0 - 2026-06-23 ## 1.0.3 - 2026-08-07
**Transparent per-platform icons; tray left-click to show window; Fyne 2.7.4.** **The findings of a whole-project review: durable JSON and log writes, bounded
History and overlap queues, and a Jobs selection that follows the job.**
- Regenerated all icon assets with feathered color-to-alpha so the rounded-tile boundary is transparent — the opaque white halo visible on dark taskbars and trays is gone. **Application:**
- Rebuilt `gosentry.ico` as a multi-size file (16 hand-tuned + 32/48/256 from the large PNG) and added a dedicated 16×16 `gosentry-icon-16x16.ico` for the Windows tray.
- Per-platform icon wiring: Windows window/taskbar uses the ICO resource so GLFW selects the right frame per slot (no `a.SetIcon` override); Windows tray uses the 16×16 ICO; Linux titlebar uses `IconSmall()` for a crisp ~16 px `_NET_WM_ICON`. - Fixed a Windows quoting bug where a job whose **Command** field held a whole
- Left-clicking the tray icon now shows and focuses the main window (`SetSystemTrayWindow`) without opening the menu; the explicit "Show" menu item is preserved for right-click access. command line (a `.bat`/`.cmd` wrapper followed by an argument that itself
- Upgraded Fyne 2.6.3 → 2.7.4 (systray 1.11.0 → 1.12.1): startup time drops from ~644 ms to ~414 ms (−36%). ended in `.exe`) had its entire command line mistaken for the program path,
so the run failed with an unmappable shell error. The program path is now
found by the earliest file-extension match at a word boundary, not the first
extension in list order.
- `gosentry.json` and `jobs.json` (and run log files) are now written
atomically — to a temp file, then renamed into place — so a crash or power
loss mid-write can no longer leave a truncated or empty file. `Service.Stop()`
is now called when the app quits, which also makes the run context
cancellation reach in-flight runs on shutdown.
- Fixed the "queue" overlap policy's backlog (`PendingRuns`): it no longer
survives a global pause or a job being disabled, so resuming or re-enabling a
job can no longer replay a deferred run left over from before the pause/
disable. It is also capped at 10 queued occurrences, so a job whose runs take
longer than its own interval no longer accumulates an unbounded backlog that
then runs back-to-back indefinitely. The job details pane now shows the
queued-run count (", N queued") whenever it is non-zero.
- **Start-only jobs are no longer tied to the application's lifetime.** A job
with *Start only* checked is launched on an uncancelable context, so quitting
GoSentry (or a run context being cancelled) can no longer try to kill a
process it deliberately stopped waiting for. This also removes a goroutine
that leaked on every start-only run and lived until the app exited.
- The History tab no longer grows without bound: it keeps the newest 1000
records and drops the oldest, the way a job's own activity list is capped.
Column widths are also folded in one record at a time instead of being
re-measured across every row on every event, so recording a run no longer
gets slower the longer the app has been running. Measured on 5000 accumulated
records, one History redraw went from **15.8 ms to 0.9 ms**; at the new cap
the width rescan alone accounted for 1.5 ms of every redraw.
- Two runs of the same job that start within the same second no longer share a
log file name. The later one gets a `-2`, `-3`, … suffix instead of silently
overwriting the earlier one's log — reachable with a fast manual re-run or a
sub-second queue drain.
- A hand-edited `jobs.json` in which two entries carry the same `id` no longer
leaves them sharing one runtime, one parsed schedule, and one statistics
bucket; the duplicate is reassigned a free ID on load, as an absent ID always
was.
- The **average run duration** shown in Statistics is now the exact sum divided
by the timed-run count rather than an incrementally folded integer mean. The
old form truncated on every run and the error compounded over a job's life,
so the live figure drifted away from the one rebuilt from log files after a
restart.
- On Linux, a failure to install the `.desktop` file or icon is now reported in
History instead of being discarded, so the visible symptom — a generic dock
icon — has an explanation.
**Jobs:**
- **The Jobs tab keeps its selection on the job, not on the row.** Selecting a
different jobs file in Settings replaces the whole job list; the details pane
then described whichever job happened to land on the previously selected row —
or went blank if the new list was shorter — while the highlight in the list
stayed where it was. The selection now follows the job itself, and the
highlight and the details pane always describe the same one.
- Switching the **Folder** filter now keeps the current selection when the new
filter still shows that job, instead of always jumping to the folder's first
job.
**Settings:**
- **Max log files and max log age days now accept 0, meaning "keep
everything."** Log cleanup already supported disabling either policy; the
Settings form and the Service validator rejected the value that would have
turned it on. A config that already set either to 0 is no longer silently
rewritten back to the 100/30 defaults on load.
- Opening the tab and saving no longer block the window while the autostart
status is read — on Windows that check shells out to PowerShell, and it now
runs off the UI thread.
- Two spellings of the same absolute **Jobs file** path (mixed separators, a
trailing separator) no longer read as a change of file, so saving no longer
triggers a spurious reload of the file already in use.
**Documentation:**
- Documentation audited against the code. `ARCHITECTURE.md` — the `jobs_view.go`
split is six files, not five (the state extraction was never counted), the
statistics table lists `TimedRunCount`, the store edge of the diagram names
the methods that exist, and startup says where `Service.Start` is actually
called. `TESTS.md` — three tests that had no entry are described
(`TestLoadOrCreateConfigPreservesZeroRetentionLimits`,
`TestWriteJSONReplacesFileAtomically`,
`TestQuoteLeadingWindowsProgramPathPicksEarliestBoundedExtension`), the
deliberately-uncovered list covers everything the profile reports at 0%, and
the coverage figure records how to read the total rather than the per-package
lines. `ROADMAP.md` — the over-the-guideline table was re-measured.
- README's scheduler wording caught up with the 0.11.2 rename of "Pause all" to
**Disable auto**, and its notification description matches what the app sends.
- `STANDARDS.md` records the rules the review settled: no file I/O under
`Service.mu`, the History and pending-run caps, the zero-retention meaning,
that a start-only process outlives GoSentry, the single-instance fallback's
consequence, and the unauthenticated instance-channel port.
- `docs/REVIEW.md` (the whole-project review agenda) and the working plan it
produced are retired now that every item is either landed here or recorded in
`ROADMAP.md`, the way the test review plan was in 1.0.1. `STANDARDS.md` is the
surviving reference.
- The screenshots moved to `docs/screenshots/`.
**Internal:**
- The failure-notification timing diagnostic added in 1.0.2 is now written to
`logs/notify-timing.tsv`. The `.tsv` extension keeps it out of `CleanupLogs`,
which manages only `.log` files, so it is neither deleted by age nor counted
against **Max log files**, and the append now runs off the UI thread.
- `jobs.json` is no longer rewritten twice per run. Starting and finishing a run
touch only `JobRuntime`, which is never persisted, so both saves re-serialised
identical bytes; `SetGlobalPause` did the same alongside its real `SaveConfig`.
Removing them also removes the run-start rollback path and the save failure it
reported, so `RunDue` no longer has a start error to surface at all.
- File I/O no longer happens while `Service.mu` is held — that is the lock the
UI thread takes on every job and runtime read, so a JSON write, the
post-run log cleanup, or the startup log scan used to make a UI refresh wait
on the disk. Saves are now prepared under the lock and written after it is
released, in preparation order, so `jobs.json` still ends up matching the
in-memory list. Seeding statistics from logs also opens each log file once
instead of twice.
- The Jobs tab was split into `jobs_view.go` (construction, refresh, layout),
`jobs_view_state.go` (the job/runtime snapshot, folder filter, and selection),
`jobs_view_list.go`, and `jobs_view_toolbar.go`, joining the existing
`jobs_view_details.go` and `jobs_view_helpers.go`. What used to be one
330-line constructor whose dozen closures shared seven mutable locals is now
widgets reading one named state object — which is what made the selection fix
above a change in one place instead of five.
- `Service.Store()` is replaced by typed `Service.Config()` and `Service.Paths()`
accessors that copy under the lock, so the UI no longer reaches into a shared
`*storage.Store`. The Jobs pause control is now driven by `refreshView`
reading `svc.Config().Paused` on every event, making it a real consumer of
`SchedulerStateChanged`, and the main window's event listener is a type switch.
- Dead code removed: `collectActivity`, the `yaml` tags on `RunRecord`, the
`logArguments`/`LogArguments` alias, the redundant package-level
`SetAutostart`/`AutostartStatus` functions, and the Settings Save handler's
second copy of the Service's validation rules. The
`systemTrayRegistered`/`mainWindowHidden` globals are one `trayState` value
that `Run` owns and threads through.
- `scripts/test.bat` no longer prints mojibake for its checkmarks under a
non-UTF-8 code page.
## 1.0.2 - 2026-08-05
**KeepRunningInTray is wired to runtime; Windows failure notifications can show
the app icon (experimental).**
**Application:**
- **Keep running in the system tray** now controls behaviour: with the tray on
(default), closing the window hides it and autostart uses `--start-in-tray`;
with the tray off, closing quits the app and autostart opens the main window.
- Saving a tray change updates close behaviour and the autostart entry
immediately. The notification-area icon follows the saved value after a
restart; Settings shows a hint when a restart is needed (Fyne cannot add or
remove the icon mid-session).
- A stale autostart shortcut that still passes `--start-in-tray` no longer hides
the window when the tray setting is off — saved config wins over the CLI flag.
- On Windows, failure toasts can show the app icon: after `NewWindow`,
`AppMetadata.Icon` is registered so Fyne picks up artwork without calling
`SetIcon`, which would override the PE multi-size window/taskbar icon.
**Jobs:**
- New disabled example *Failure notification test* (folder Examples). Run it
manually to trigger a failed run and verify Settings → Notifications without
waiting on the scheduler.
**Documentation:**
- **`docs/ARCHITECTURE.md`** — new §Platform layer: why autostart, file manager,
shell, and winproc are OS-specific; compile-time vs runtime branching; rules
for adding platform code.
**Internal:**
- App-side failure-notification timing is appended to `logs/notify-timing.log`
for diagnosing toast delay (OS latency excluded).
`scripts/measure-windows-toast.ps1` measures the PowerShell baseline on
Windows.
## 1.0.1 - 2026-08-04
**The branded theme is the default, Fyne's built-in theme is System, and the
test suite is leaner.**
**Settings:**
- **The branded GoSentry theme is now the default.** Fresh installs, the
**Defaults** button, and configs that omit `theme` all open in the teal/amber
look; users who prefer Fyne's built-in theme can still pick **System** in
Settings.
- The Fyne built-in theme option is labelled **System** (stored as `"system"`);
configs that still say `"default"` are read as System and rewritten on save.
- The **About** repository link points at GitHub (`mixeme/gosentry`) instead of
the private Gitea mirror.
**Jobs:**
- The **Disable auto** row gained a top inset matching the gap below it, so it
no longer sits flush against the tab bar.
**Documentation:**
- The **README Schedules** section now documents `@every` in full: supported Go
duration units (`ns` through `h`), combined values such as `1h30m`, the link to
`time.ParseDuration`, the fact that days/months/years belong in cron rather
than `@every`, the one-second scheduler tick floor, cron examples for monthly
and yearly runs, and the `@hourly`/`@daily`/… descriptors.
**Tests:**
- Three tests with byte-identical coverage to an existing test and no unique
assertion are gone: `TestCleanupLogsKeepsFilesWithinAgeLimit`,
`TestRunDueEmptyOverlapInheritsGlobal` (its one unique setup guard moved into
`TestRunDueQueueRerunsAfterFinish`), and `TestSameWindowsPathHandlesSpaces`
(its spaces case folded into `TestSameWindowsPathIgnoresCaseAndQuotes`'s
fixture). So are two that carried no assertion at all:
`TestEmitWithNoObserversIsNoop` and `TestStoreReturnsWiredStore`.
- The four `TestFilteredJobIndexes*` tests are one table-driven
`TestFilteredJobIndexes`, matching `TestFilterValue` above it.
- `TestMainViewBuilds` is replaced by `TestMainViewRecordStartupAddsHistoryRow`,
which exercises the `recordStartup` closure for both wordings `run.go` selects
between and asserts the rows reach the History table through its cell callbacks,
including the `!windowShown` branch.
- `storage.defaultJobs` — the one accidental 0%-coverage gap the review
found — is now exercised by
`TestLoadOrCreateJobsSeedsSampleJobsOnFirstRun`, which also corrects
`docs/TESTS.md`: `TestLoadOrCreateConfigCreatesDefaultsOnFirstRun` never
touched jobs, so the "and a sample job" half of its old description was
wrong.
- `src/runner/seed_test.go`'s hand-rolled `itoa` — 18 lines of digit-by-digit
conversion in a file that already imports `strconv` — is replaced with
`strconv.FormatInt`.
- **`docs/TESTS.md`** records the `-coverpkg` command and the 84.4% baseline
(per-package figures understate the suite), design principle 9 (redundancy is
judged by comparing coverage profiles, and identical coverage alone is not
grounds for deletion), a table of the look-alike tests that are kept with the
reason each survives, and the list of functions deliberately at 0%.
- **`docs/STANDARDS.md`**'s "Intentional behavior" section points at both lists,
so the mechanism `docs/REVIEW.md` describes still reaches them. The spent test
review plan is retired.
## 1.0.0 - 2026-07-27
**The window opens at the size it asks for, and the Jobs divider can be
dragged.**
**Window:**
- **The window opens at 1024×660 and can now be dragged narrower than it opens.**
Fyne treats the assembled content's minimum size as a hard floor over the
requested size, and two widgets in Settings pushed that minimum past 1024 px:
a fixed width applied to seven controls that the layout already stretched, and
the read-only config path, which grew the whole tab with the length of the
path it was showing — a 75-character path alone demanded 1501 px. The path now
clips when the window is genuinely narrow instead of widening the window, and
the content minimum is 972 px.
**Jobs:**
- **The divider between the job list and the details pane is draggable.**
Previously the list was pinned at its natural width and the details pane took
whatever was left, so a long command or a deep folder path could not be given
more room. Either pane can now be widened at the other's expense, and neither
can be dragged below its own content, so the details pane condenses rather
than clipping. The divider opens at the list's natural width; its position is
not saved, so a restart reopens at that default.
**History:**
- **Columns measure their own content.** Time, Trigger and State were fixed
pixel widths with as little as 1.6 px of headroom and truncated their own
values on a scaled UI or at a larger text size; all five now size themselves
from the text they have to show, under the current theme. Job and Detail stay
bounded so one long row cannot take over the table.
**Settings:**
- The **Save / Cancel / Restore defaults** row sits 4 px from the left edge, as
its layout always intended, rather than 8.
- The caption column is as wide as the widest caption instead of a fixed width,
which gives each value column about 22 px more and keeps the captions readable
at a larger text size.
- The **Application** and **About** blocks are about 2 px tighter: every stacked
row group in the app now shares one spacing derived from the theme rather than
three separately tuned numbers.
- The **Theme** dropdown is no longer flush against the **Notifications**
checkbox. That shared row spacing pulls rows together by one text inset, which
the rows above have to give but a dropdown — which paints its box out to the
row's edge — does not, so the gap collapsed to about a pixel. The Theme row
now keeps the same gap the checkbox rows have.
**Documentation:**
- The **README** describes the application that exists. Its `gosentry.json`
sample was three keys short of what the app writes on first run, which made
the one file the user is invited to hand-edit the least accurate thing in the
document; it is now the real default, with each key explained — including why
a zero timeout is written out and an unset one is not. The feature list has
caught up with the run timeout, the theme, the compact job list, and the
per-job overlap and timeout overrides the job dialog has always offered.
- **`docs/DEVELOPMENT.md`** is ordered as stack, external libraries, run from
source, build, release, CI, behind a two-level table of contents, instead of
opening with MSYS2 setup and burying "Run From Source" mid-document. The
library table gains versions and licenses, the `package-*` scripts are
documented for the first time and labelled by OS, and the Codeberg
`RELEASE_TOKEN` note now states the failure mode rather than leaving it to be
inferred from a red job: build and packaging succeed, the upload step fails on
authentication and takes the job with it, leaving a published release with no
assets. The Project Layout section is gone — it duplicated ARCHITECTURE's
package map and had drifted out of date.
- **Cutting a GitHub release now documents the push mirror it has to survive.**
GitHub is a pruning push mirror of Gitea, so `gh release create` creating the
tag itself produces a tag Gitea does not know about, which the next
synchronisation deletes — orphaning the release and taking its uploaded
archives with it, without a single failed step to point at. The procedure is
push the tag to Gitea, wait for the mirror, verify the tag on GitHub, then
publish with `--verify-tag`.
- **`docs/TESTS.md`** matches the suite it indexes again. It listed 130 tests
against 170 in the tree, omitted four test files entirely, and named two tests
that no longer exist. Every test function now appears exactly once, under the
file it actually lives in.
- **`docs/ARCHITECTURE.md`** no longer draws the UI calling the autostart
manager directly — it does not, and `src/ui` holds no reference to that
package — and `platform/desktop` is described by what it does (the XDG desktop
entry and icon) rather than as a display-scale helper.
- The **~250-line file guideline** is stated as the target it is, with the six
files currently over it recorded as a `docs/ROADMAP.md` item. They are to be
split in one pass during the next whole-project review, since six separate
passes would settle the same seam question six ways.
## 0.15.0 - 2026-07-26
**Settings points at the jobs file itself, not the folder holding it.**
**Settings:**
- The **Jobs directory** row is now a **Jobs file** row. Browse opens a file
picker filtered to `.json` instead of a folder picker, so the job list can
live under any file name — `team-jobs.json`, one file per machine, a file
shared over a network drive — rather than a fixed `jobs.json` per folder. The
field stays editable, which is how a file that does not exist yet is named.
- **Selecting an existing jobs file now loads it.** Previously the current job
list was written over whatever was at the new path, which made it impossible
to switch to an existing jobs file — its contents were destroyed on Save. Now
an existing file wins: its jobs are loaded, normalized, and replace the loaded
list, with runtimes, parsed schedules, next-run times, and log-seeded
statistics rebuilt around them. A path with no file behind it still receives
the current jobs (and its folder is created), which is how the jobs file is
renamed or relocated. History records `Jobs loaded — N jobs from <path>`,
since the switch happens without a prompt.
- Switching to a different jobs file is refused while a job is running: adoption
discards every runtime, and a run finishing afterwards would write its result
onto whichever job inherited its ID. Settings unrelated to the jobs file still
save normally during a run.
- Saving a path with no file name (a trailing separator, `.`, `..`) is rejected
with "jobs file must include a file name" instead of failing later with an
opaque OS error.
**Configuration:**
- `Config.JobsDir` / `jobs_dir` is replaced by `Config.JobsFile` / `jobs_file`,
which holds the full path including the file name; the default is
`"jobs.json"`, resolved against the program folder as before. `Paths.JobsDir`
is now derived from the configured file so job saves still create the folder.
- A `gosentry.json` written by an earlier version is migrated on load: its
`jobs_dir` is joined with `jobs.json`, which is the exact file that version
used, and the retired key is dropped when the config is rewritten.
- New `app.JobsLoaded{Path, Count}` event, emitted when a selected jobs file
replaces the job list; the UI turns it into the History entry. New
`storage.LoadJobsFile`, which reads and normalizes a jobs file and reports a
missing one as "not found" instead of seeding it the way startup does.
## 0.14.0 - 2026-07-26
**Compact job list view, "no timeout" at both timeout levels, and an Open
button for the logs folder.**
**Compact job list view.**
- The Jobs sidebar can now render each job as a single line — name on the left,
status on the right — instead of the three-line block. A toggle button beside
the Folder filter switches between **Compact** and **Detailed**; it is
labelled with the action it performs, like the "Disable auto" button. Compact
fits many more jobs on screen without scrolling; selection, the details panel,
the folder filter, and live status updates all work unchanged in both modes.
- The choice is persisted as a new `Config.JobListView` field
(`"detailed"` / `"compact"`, written to `gosentry.json` as `job_list_view`),
so it survives a restart. Empty/legacy configs and any unrecognised value
normalize to detailed, so existing installs keep the current look.
**Jobs sidebar:**
- The **Folder** caption moved onto the filter row itself, beside the select and
the view toggle, instead of occupying its own line above it — the job list now
starts a full label higher.
**Settings:**
- The **Logs directory** row gained an **Open** button that shows the folder in
the desktop file manager (Explorer on Windows, the XDG handler on Linux), so
reading a log file no longer means copying the path by hand. It opens the
path currently in the field — including an edit that has not been saved yet —
resolving a relative directory against the application folder exactly as the
store does. A folder that is missing (the logs directory is created on the
first run) or cannot be opened is reported in a dialog.
- The Save/Cancel/Defaults row sat flush against the separator above it and the
tab's left edge; it now uses the same padding as the other vertical gaps in
the tab.
**Job dialog:**
- The **Arguments** placeholder now states the field's rule — one argument per
line, no quoting — instead of showing a lone example path that left the
line-per-argument convention to guesswork.
**Timeouts: 0 now means "no timeout" at both levels.**
- The global **Default timeout** in Settings now defaults to `0`, meaning jobs
run to completion with no deadline instead of being killed after 30s.
- A per-job timeout of `0` now also means "no timeout" and no longer inherits
the global default. Leaving the job's timeout **empty** is what inherits.
`Job.TimeoutSeconds` became `*int` so the three states — unset, explicit 0,
and a positive limit — stay distinguishable in `jobs.json`.
- Fixed: a global default of `0` did not survive a restart. `gosentry.json` was
loaded with `0` treated as a missing value and silently reset to 30s, so the
setting only held for the current session. `default_timeout_seconds` is now
written unconditionally and read back as-is.
Existing jobs and configs are unaffected: a job with no `timeout_seconds` still
inherits, and a saved global default of 30 stays 30.
**Internal:**
- Job names in the list are truncated through the widget's `Truncation` field;
`fyne.TextTruncate` is deprecated in Fyne 2.7.4. Behavior is unchanged.
- Docker release builds mount `.gocache/` from the host, so `--rm` container
removal no longer wipes `GOCACHE` between runs.
- Added `docs/REVIEW.md` (the project-review agenda) and a "Config file
compatibility" section in `docs/STANDARDS.md` recording the rule the `Theme`,
`JobListView`, and `TimeoutSeconds` fields already follow. Added `CLAUDE.md`.
## 0.13.0 - 2026-07-26
**Branded GoSentry color theme; Cancel/Defaults buttons in Settings.**
**Theme:**
- Added a custom Fyne theme derived from the logo and app icon (deep teal
primary, amber accent, branded job-status colors) with light and dark
variants; users can switch between it and Fyne's default theme from
Settings. The choice is persisted as a new `Config.Theme` field
(`"default"` / `"gosentry"`), applied at startup before the first frame
and live-previewed when picked in Settings. Empty/legacy configs
normalize to the default theme so existing installs keep the original
look.
- The light variant is boldly branded: a soft teal window canvas with
white inputs, menus, dialogs, and buttons on top, plus teal-tinted
separators, input borders, and table headers, so cards and fields lift
off the background instead of reading as a plain accent swap on gray.
The dark variant uses deep-teal surfaces to echo the app icon. Text
stays dark/light per the base foreground for contrast in both variants.
**Settings tab:**
- Added Cancel and Defaults buttons. Cancel discards unsaved edits by
reloading the saved config; Defaults loads built-in default values into
the form for review before saving. `domain.DefaultConfig()` is now the
single source of truth for default values, shared by storage and the
Settings UI.
## 0.12.0 - 2026-07-25
**Per-job command timeout:**
- Each job may now set its own run timeout (seconds) in the job dialog; leaving
it empty inherits a new **Default timeout** in Settings (default 30s), the same
inherit pattern as the overlap policy. The details panel shows the effective
value, marking inherited jobs as `(global default)`.
- The formerly hard-coded 30s guard in `runner.RunJob` is now the configurable
default. `StartOnly` fire-and-forget jobs remain unaffected by the run timeout,
continuing to measure launch latency only.
## 0.11.5 - 2026-07-01
**Quality and documentation polish:**
- Replaced the interim `docs/FUTURE_WORK.md` with `docs/STANDARDS.md` — a slim,
permanent reference for code-quality rules and intentional behavior.
- `newMainView` now accepts an injected `*app.Service` for testability;
`RunNow` errors are shown in a dialog instead of failing silently.
- Empty job lists no longer panic when building the Jobs tab.
- Added regression and helper tests for overlap/pause scheduling, UI history
helpers, main-view smoke build, and Linux desktop integration.
## 0.11.4 - 2026-06-30
**Statistics:**
- `StartOnly` jobs now record launch latency (time to spawn the process) as the
run duration instead of a hard-coded `0`, so the Statistics line shows a real
last/avg/max for fire-and-forget jobs. Sub-millisecond launches still round to
0 and are excluded from the average, as before.
## 0.11.3 - 2026-06-29
**Reliability fixes from an internal code review: safer runs, a real overlap
queue, and more accurate statistics.**
**Scheduler / runs:**
- Fixed a data race where background runs could read log paths while settings
were being saved.
- A run no longer starts if persisting the "Running" state fails; the job rolls
back to its previous status instead.
- Under the `"queue"` overlap policy, every missed occurrence while a run is
still in flight is now remembered and executed afterward (not just the last one).
- Manual and scheduled runs now advance next-due timing from the scheduler clock
consistently.
**Application service:**
- Create, update, delete, enable/disable, and global pause no longer announce
UI changes when the underlying JSON save fails.
- Invalid per-job `overlap_policy` values are rejected at save time.
- Log file write failures are reported in History instead of failing silently.
**Statistics:**
- Startup stat seeding matches log files by `job_id`, avoiding collisions when
different job names sanitize to the same filename.
- Average run duration excludes zero-duration runs (such as StartOnly launches),
matching how stats are rebuilt from log files.
**Documentation:**
- Added `docs/CODE_REVIEW.md` with the full review summary.
- Corrected stale YAML references and clarified that global pause stops only
scheduled runs while manual "Run now" remains available.
## 0.11.2 - 2026-06-25
**Window state persistence, History sort fix, clearer scheduler toggle, and an
appID update.**
**Application:**
- The window size (width and height) is now persisted in preferences and
restored on next launch. When the user closes the window (via Quit menu or
window close button), the current dimensions are saved and will be applied
when the application starts again. Defaults to 1024×660 if no saved size exists.
- Updated appID from `ru.mixdep.gosentry.desktop` to `ru.mixeme.gosentry.desktop`
for consistency with the new domain name.
**History tab:**
- Fixed the Time column sort toggle, which stopped working after Fyne 2.7.4 began
rejecting header-cell selections. The plain header label is replaced with a
custom tappable header widget that handles the click directly.
- The sort direction is now shown with ▲/▼ glyphs instead of the "asc"/"desc"
text.
**Jobs list:**
- Renamed the global scheduler toggle from "Pause all"/"Resume all" to
"Disable auto"/"Enable auto", and swapped the stop icon for a pause icon, to
make clear that it only stops automatic scheduled runs.
## 0.11.1 - 2026-06-25
**Settings tab refinements: even spacing, full labels, and a smarter Save button.**
**Settings tab:**
- The Queue selects (Execution mode, Default overlap policy) now use the same
default spacing as the Storage fields, so they no longer sit squeezed together.
- Widened the caption column so the longest label, "Default overlap policy", is
shown in full instead of being truncated.
- The Save button now starts disabled and only enables once a field differs from
the saved config, re-disabling after a successful save (or if a changed field
is reverted to its original value).
## 0.11.0 - 2026-06-25
**Manual runs while paused, two-column Settings/details, and a more compact job list.**
**Scheduler:**
- "Run now" is now allowed while the scheduler is globally paused. The global
pause stops only automatic scheduled runs; an explicit manual run is the user's
own one-off action and is no longer blocked (the already-running and
sequential-mode guards still apply).
**Jobs details panel:**
- Metadata captions (Folder, Command, Run mode, …) are pinned to a fixed width
instead of an even split, so widening the window now grows the value column
rather than the short caption.
- Fixed a bug where the "Selected job activity" panel kept showing the previous
job's entries when a different job was selected; the list now refreshes on
every selection change.
**Jobs list:**
- List rows (name, schedule/command, status) are condensed with a tight,
negative-gap layout so more jobs are visible without scrolling.
**Settings tab:**
- The form is reorganized into two columns — Application and Queue on the left,
Storage and About on the right — with the Save button spanning the full width
below. The Autostart status moved onto its own line so the section fits a
half-width column.
- Removed the blank row that sat between the Save button and the following
separator.
## 0.10.2 - 2026-06-25
**Condensed details/settings panels and a window that shrinks to 720p.**
**Jobs details panel:**
- Job metadata is laid out in two columns (Folder/Schedule, Command/Arguments,
Run mode/Overlap policy, Last run/Next run, State/Statistics), roughly halving
the block height.
- Metadata rows are stacked with a tight, negative-gap layout so the interval
between rows is no longer oversized.
- The command-output area's minimum height was reduced so the details pane can
get shorter; long output still scrolls.
- The "Selected job activity" panel is now sized to exactly fit
`maxJobActivityRows`, derived from `widget.List`'s own row metrics, so all
three rows are visible without a scrollbar regardless of theme or DPI.
**Settings tab:**
- The form is wrapped in a vertical scroll so it no longer dictates the window's
minimum height (tab containers size to the tallest tab); it scrolls on short
screens instead.
- Label-only sections (Application, Queue, About) are condensed, while
separators and the editable Storage fields keep normal spacing so dividers
have breathing room and entry boxes stay visibly separated.
**Window sizing:**
- Together these changes drop the minimum window height from ~891px to ~570px,
so the window can be resized noticeably shorter and fits comfortably on 720p
screens.
## 0.10.1 - 2026-06-24
**Refactoring:**
- Unified icon asset naming from mixed scheme (big/16x16) to consistent
size-based names (large/small) for clarity and maintainability.
**Build:**
- Windows build script now displays informative messages at each build step
(version, output path, environment setup, icon embedding, compilation)
to improve build transparency and aid troubleshooting.
## 0.10.0 - 2026-06-24
**Compact activity rows; per-job execution-time statistics seeded from log files.**
**Activity panel (one-line rows):**
- Each entry in the job log list is now a single truncated line using only the
base name of the log file (e.g. `20260624-120000_Build.log`) instead of the
full path. Long lines are clipped rather than wrapped, keeping the panel
compact with many runs.
- History table retains the full log path for reference; base-name truncation
applies only to the activity rows in the Jobs details panel.
**Execution-time statistics:**
- Added `DurationMS` field to `RunRecord`; the runner measures wall-clock
start-to-finish and writes it to both the record and a `duration:` header
line in the log file. `StartOnly` jobs record `0`.
- Added aggregate counters to `JobRuntime`: `RunCount`, `FailCount`,
`LastDurationMS`, `AvgDurationMS`, `MaxDurationMS`. Updated after every
completed run in `executeRun`.
- On startup the statistics are seeded from existing log files: the runner
parses `state:` and `duration:` headers for each job's newest log files
(bounded by `MaxLogFiles`). Legacy logs without a `duration:` line still
count toward `RunCount`/`FailCount` but are excluded from duration
aggregates so a missing duration cannot appear as a zero-millisecond run.
- A **Statistics** row in the Jobs details panel shows a one-line summary
(`N runs, M failed, last X ms, avg Y ms, max X ms`) that refreshes after
each run and is pre-populated from log files after a restart.
**Per-job overlap policy:**
- Added an `OverlapPolicy` field to `domain.Job`; a job can now override the
global skip/queue default. `RunDue` resolves the effective policy per job
(the job's value if set, otherwise `Config.OverlapPolicy`).
- The job dialog gains an overlap-policy selector with a
"(Use global default)" option that saves empty so the job inherits the
global setting. The details panel reflects the effective policy.
**Persisted global pause:**
- Added `Paused` to the config so the global "Pause all" state survives a
restart. `SetGlobalPause` persists the new value, and the service initializes
its paused state from config at startup — a paused install now relaunches
paused instead of silently resuming the scheduler.
- The Pause-all/Resume-all button and scheduler-state label initialize from the
persisted state.
**Window sizing (720p-safe):**
- Lowered the default window size to `1024×660` with a sensible `MinSize` so the
window opens fully visible on a 1366×768 / 720p screen. Layout minimums in the
Jobs view were tightened to match.
**Packaging:**
- Added portable-distribution helpers: `scripts\package-windows.bat` builds and
bundles `gosentry.exe`, `README.md`, and `CHANGELOG.md` into a versioned
`.zip`; `scripts/package-linux.sh` does the same for `linux-amd64` and
`linux-arm64` into `.tar.gz` archives.
**Internal cleanup:**
- Split `ui/jobs_view.go` into focused files (`jobs_view_details.go`,
`jobs_view_helpers.go`) to bring it back under the file-size guideline.
- Removed the one-time YAML→JSON import path (shadow structs, `importYAML*`,
legacy path names) now that the 0.9.0 transition window has passed;
`go.yaml.in/yaml/v4` is dropped from `go.mod`.
- Post-field-test sweep of stale diagnostics, obsolete autostart-migration code,
and noisy README/ignore rules. The startup-timing History event is retained.
- Removed the completed release-milestone docs and trimmed `ROADMAP.md` to open
items only.
## 0.9.0 - 2026-06-24
**Storage migrated to JSON; queue execution modes; failure notifications; tray left-click; Fyne 2.7.4.**
**Storage and data model:**
- Settings and jobs now stored as `gosentry.json` and `jobs.json` (2-space indented JSON).
On first run after upgrading, existing `gosentry.yaml` / `jobs.yaml` files are imported
automatically and rewritten as JSON; the YAML files are not deleted.
- Removed `SuccessExitCodes` field. Exit-code handling is now fixed: exit code 0 = success,
any nonzero exit code = failure. Jobs relying on nonzero success codes must switch to
`StartOnly` mode if the exit code is irrelevant.
**Execution modes and overlap policies:**
- Added `ExecutionMode` (parallel/sequential) and `OverlapPolicy` (skip/queue) settings in
Settings under a new Queue group.
- **Parallel mode** (default): all due jobs start simultaneously.
- **Sequential mode**: due jobs run one at a time, in order.
- **Skip policy** (default): if a job comes due while its previous run is still active, the new
run is discarded.
- **Queue policy**: if a job comes due while running, the run is held and automatically started
when the current run completes.
- Both settings are persisted to `gosentry.json` and validated on load; defaults ensure
backward compatibility.
**Notifications and command input:**
- Failed job runs now raise a desktop notification (when enabled in Settings) with the job name
and failure detail. Notifications fire for scheduled and manual runs; internal activity events
are not notified.
- Added a Browse button next to the Command field in the job dialog for file picker selection.
**UI and platform integration:**
- Removed all PySentry legacy code: registry autostart entries (Windows), systemd and desktop
file cleanup (Linux).
- Updated `.gitignore` and `.dockerignore` to track `gosentry.json` / `jobs.json` instead of
legacy YAML filenames; added `*.yaml` wildcard to ignore legacy files during import.
- Moved developer documentation (Requirements, Build, Run From Source, Project Layout, Dependencies)
out of README into `docs/DEVELOPMENT.md`. README now focuses on end-user content.
**Icons and tray:**
- Regenerated all icon assets with feathered color-to-alpha so the rounded-tile boundary is
transparent — the opaque white halo visible on dark taskbars and trays is gone.
- Rebuilt `gosentry.ico` as a multi-size file (16 hand-tuned + 32/48/256 from the large PNG)
and added a dedicated 16×16 icon for the Windows tray.
- Per-platform icon wiring: Windows window/taskbar uses the ICO resource so GLFW selects the
right frame per slot; Windows tray uses the 16×16 ICO; Linux titlebar uses `IconSmall()` for
a crisp ~16 px `_NET_WM_ICON`.
- Left-clicking the tray icon now shows and focuses the main window without opening the menu;
the explicit "Show" menu item is preserved for right-click access.
**Performance:**
- Upgraded Fyne 2.6.3 → 2.7.4 (systray 1.11.0 → 1.12.1): startup time drops from ~644 ms to
~414 ms (−36%).
- Moved Windows-only runner tests into `runner_windows_test.go` (guarded by `//go:build windows`)
to fix Linux test build.
## 0.8.0 - 2026-06-23 ## 0.8.0 - 2026-06-23
docs/DEVELOPMENT.md
+352
View File
@@ -0,0 +1,352 @@
# GoSentry — Development
Toolchain, dependency, build, and release information for contributors.
## Contents
1. [Technology Stack and Tools](#1-technology-stack-and-tools)
- [Toolchain — Windows](#toolchain--windows)
- [Toolchain — Linux](#toolchain--linux)
- [Repository scripts](#repository-scripts)
2. [External Libraries](#2-external-libraries)
3. [Run From Source](#3-run-from-source)
4. [Building the Executable](#4-building-the-executable)
- [Windows](#windows)
- [Linux](#linux)
- [Linux using Docker](#linux-using-docker)
5. [Building a Release](#5-building-a-release)
- [All targets from Linux](#all-targets-from-linux)
- [Packaging](#packaging)
6. [CI](#6-ci)
- [Cutting a release](#cutting-a-release)
- [Releasing through the GitHub push mirror](#releasing-through-the-github-push-mirror)
## 1. Technology Stack and Tools
GoSentry is a single desktop process written in Go with a Fyne GUI. There is no
server component and no external runtime: the release artifact is one native
executable per platform.
| Layer | Choice |
| --- | --- |
| Language | Go 1.22 or newer |
| GUI toolkit | Fyne v2 (OpenGL desktop backend) |
| Scheduling | `robfig/cron/v3` expression parser |
| Persistence | Plain JSON files (`gosentry.json`, `jobs.json`) |
| Build | `go build` driven by the scripts in `scripts/` |
| Reproducible builds | Docker (`golang:1.22-bookworm` based [Dockerfile](../Dockerfile)) |
| CI | GitHub Actions and Forgejo Actions (Codeberg) |
CGO is mandatory. The Fyne desktop backend links against native OpenGL and
window-system libraries, so a C compiler must be present for every build,
including `go run` and `go test`.
### Toolchain — Windows
- [Go](https://go.dev/) 1.22 or newer.
- MSYS2 with UCRT64 GCC in `C:\msys64\ucrt64\bin` (plus `windres` for the icon
resource).
```powershell
# 1. Install Go 1.22 or newer from https://go.dev/dl/.
# The default installer path is C:\Program Files\Go.
go version
# 2. Install MSYS2 from https://www.msys2.org/.
# Use the default installation path so UCRT64 tools are placed under
# C:\msys64\ucrt64\bin.
# 3. Open "MSYS2 UCRT64" from the Start menu and install GCC plus windres.
pacman -Syu
pacman -S --needed mingw-w64-ucrt-x86_64-gcc mingw-w64-ucrt-x86_64-binutils
# 4. In PowerShell, check that the compiler is available where the build script
# expects it. build-windows.bat prepends this directory automatically.
Test-Path C:\msys64\ucrt64\bin\gcc.exe
Test-Path C:\msys64\ucrt64\bin\windres.exe
```
### Toolchain — Linux
- [Go](https://go.dev/) 1.22 or newer.
- A C compiler.
- [Fyne](https://fyne.io/) native build dependencies, including OpenGL/X11
development packages.
```bash
# Go builds the application, gcc is required by CGO/Fyne, and the OpenGL/X11
# development packages provide the native desktop headers used by Fyne.
sudo apt install golang gcc libgl1-mesa-dev xorg-dev
```
### Repository scripts
| Script | Purpose |
| --- | --- |
| `scripts/test.bat`, `scripts/test.sh` | `go vet ./...` then `go test -race ./...` |
| `scripts/build-windows.bat` | Windows amd64 executable |
| `scripts/build-linux.sh` | Linux amd64 executable |
| `scripts/build-linux-docker.sh` | Linux amd64 executable, built in Docker |
| `scripts/build-release-linux.sh` | Multi-target release artifacts from one Linux/Docker workflow |
| `scripts/package-windows.bat`, `scripts/package-linux.sh` | Wrap a built binary into a distributable archive |
| `scripts/ci-build-release.sh` | Entry point used by both CI workflows |
Build outputs are written to `dist/`. The package layout is documented in
[ARCHITECTURE.md](ARCHITECTURE.md).
## 2. External Libraries
GoSentry keeps the direct dependency list intentionally small. GoSentry itself
is distributed under the [MIT License](../LICENSE).
| Dependency | Version | Repository | License |
| --- | --- | --- | --- |
| Go toolchain | 1.22+ | https://go.googlesource.com/go | BSD 3-Clause |
| `fyne.io/fyne/v2` | v2.7.4 | https://github.com/fyne-io/fyne | BSD 3-Clause |
| `github.com/robfig/cron/v3` | v3.0.1 | https://github.com/robfig/cron | MIT |
The remaining entries in `go.mod` are indirect dependencies pulled in by Fyne
and the Go module resolver. To list every direct and indirect module used by the
current checkout:
```bash
go list -m all
```
## 3. Run From Source
Windows:
```powershell
# Fyne requires CGO on Windows. MSYS2 UCRT64 provides the C compiler and native
# libraries used by the desktop backend.
$env:Path = 'C:\msys64\ucrt64\bin;' + $env:Path
$env:CGO_ENABLED = '1'
# go run starts the app from source. Use scripts\build-windows.bat when you need
# a standalone .exe without a console window.
& 'C:\Program Files\Go\bin\go.exe' run ./cmd/gosentry
```
Linux:
```bash
# CGO must stay enabled because the Fyne GUI links against native Linux desktop
# libraries.
CGO_ENABLED=1 go run ./cmd/gosentry
```
The same environment is required for the test suite — see
[TESTS.md](TESTS.md):
```powershell
scripts\test.bat
```
## 4. Building the Executable
### Windows
```powershell
# Builds dist\windows\gosentry-<version>-windows-amd64.exe. The script changes
# to the repository root first, so double-clicking it from Explorer works. It
# also adds MSYS2 UCRT64 to PATH for this process only, embeds the Windows icon
# when windres is available, and uses the Windows GUI subsystem so no console
# window opens at startup.
.\scripts\build-windows.bat
```
The Windows build is created as a GUI application, so it does not open a
terminal window. The binary is written to:
```text
dist\windows\gosentry-<version>-windows-amd64.exe
```
### Linux
```bash
# Make the helper executable once, then build a linux/amd64 Fyne binary.
chmod +x ./scripts/build-linux.sh
./scripts/build-linux.sh
```
The binary is written to:
```text
dist/linux/gosentry-<version>-linux-amd64
```
### Linux using Docker
```bash
# Builds the Linux binary inside Docker using the versioned image tag
# gitea.mixdep.ru/mix/gosentry-builder:<version>. Useful from hosts or CI jobs
# where the native Linux/Fyne packages are not installed locally.
chmod +x ./scripts/build-linux-docker.sh
./scripts/build-linux-docker.sh
```
The binary is copied to:
```text
dist/linux/gosentry-<version>-linux-amd64
```
## 5. Building a Release
### All targets from Linux
```bash
# Interactively choose Linux amd64, Linux arm64, Windows amd64, or all artifacts
# from one Linux/Docker workflow. The Dockerfile contains the builder
# environment; the build commands live in this script. Docker runs the build
# with the current user's UID/GID so dist/ files are not owned by root.
chmod +x ./scripts/build-release-linux.sh
./scripts/build-release-linux.sh
```
Non-interactive release builds can pass target names:
```bash
# Build only Linux arm64 and Windows amd64 artifacts.
./scripts/build-release-linux.sh linux-arm64 windows-amd64
```
The binaries are copied to:
```text
dist/linux/gosentry-<version>-linux-amd64
dist/linux/gosentry-<version>-linux-arm64
dist/windows/gosentry-<version>-windows-amd64.exe
```
### Packaging
The `package-*` scripts build the binary for their platform and wrap it in a
distributable archive together with `README.md` and `CHANGELOG.md`:
Windows:
```powershell
scripts\package-windows.bat
```
```text
dist\windows\gosentry-<version>-windows-amd64.zip
```
Linux:
```bash
./scripts/package-linux.sh
```
```text
dist/linux/gosentry-<version>-linux-amd64.tar.gz
dist/linux/gosentry-<version>-linux-arm64.tar.gz
```
The arm64 archive is produced only when the `aarch64-linux-gnu-gcc` cross
compiler is available; otherwise that target is skipped with a message.
The version stamped into the file names and into the binary comes from
`src/app/version.go`.
## 6. CI
Tagged releases are built automatically on both GitHub and Codeberg:
- `.github/workflows/release.yml` — GitHub Actions.
- `.forgejo/workflows/release.yml` — Forgejo Actions (Codeberg).
Both run inside `golang:1.22-bookworm` (the same base image as the
[Dockerfile](../Dockerfile)), install the cross toolchain, and call
`scripts/ci-build-release.sh`, which builds and packages all three artifacts:
```text
dist/linux/gosentry-<version>-linux-amd64.tar.gz
dist/linux/gosentry-<version>-linux-arm64.tar.gz
dist/windows/gosentry-<version>-windows-amd64.zip
```
The Windows binary is cross-compiled with MinGW-w64 from the Linux job, so no
Windows runner is required. Each archive contains the executable plus `README.md`
and `CHANGELOG.md`, matching the local `package-*` scripts.
### Cutting a release
Before tagging:
1. Bump `src/app/version.go`. The tag must match it exactly.
2. Add the version's [CHANGELOG.md](CHANGELOG.md) section.
3. Retake the README screenshots (`docs/screenshots/screenshot_jobs.PNG`,
`docs/screenshots/screenshot_settings.PNG`,
`docs/screenshots/screenshot_history.PNG`) if the GUI changed its appearance. This is
easy to forget because nothing fails without it: `README.md` is packaged
inside every release archive and is what the forge shows on the project page,
so a stale shot advertises an application that no longer exists. Take them
from a real build, not from a development run with test data.
4. Run `scripts/test.bat` (or `go vet ./... && go test -race ./...`) and push
`main`, so the tag lands on a commit the forge actually has.
Then create and publish a release with a matching `v` tag on the forge (GitHub
Releases / Codeberg releases). `origin` is the Gitea repository, and GitHub is a
push mirror of it, so the tag is pushed to Gitea and reaches GitHub through the
mirror — never created on GitHub directly (see
[Releasing through the GitHub push mirror](#releasing-through-the-github-push-mirror)):
```bash
git tag v0.11.5
git push origin v0.11.5 # Gitea; and to the Codeberg remote
# wait for the mirror, then confirm GitHub actually has the tag
git ls-remote --tags https://github.com/mixeme/gosentry.git v0.11.5
gh release create v0.11.5 --verify-tag --generate-notes # GitHub; publishes the release
```
Publishing the release triggers the workflow: it strips the leading `v` from
the tag and injects it as the version (so the tag must match `version.go`),
builds the archives, and attaches them to that release. `workflow_dispatch`
also allows a manual, upload-free build to smoke-test the pipeline.
Codeberg publishing needs a repository secret named `RELEASE_TOKEN` (a Codeberg
access token with the `write:repository` scope) under
**Settings → Actions → Secrets**. Without it the build and packaging steps still
succeed, but the upload step fails on authentication and takes the job down with
it, leaving a published release with no attached assets. GitHub needs no such
setup: `softprops/action-gh-release` falls back to the built-in `GITHUB_TOKEN`,
and the workflow already grants it `contents: write`.
### Releasing through the GitHub push mirror
The GitHub repository `mixeme/gosentry` is not a separate remote you push to; it
is a push mirror driven by Gitea. Gitea mirrors with pruning, so every ref that
exists on GitHub but not in Gitea is deleted on the next synchronisation.
This is what breaks the obvious way of cutting a GitHub release. `gh release
create v1.0.0` creates the tag on GitHub when it is missing — a tag Gitea has
never heard of. The next mirror run prunes it, GitHub orphans the release whose
tag disappeared and turns it into a draft, and the release looks deleted on the
Releases page. The archives go with it. Nothing reports an error: the workflow
ran, the assets uploaded, and the release evaporated afterwards.
The order that works is therefore:
1. `git push origin <tag>` — the tag enters Gitea, which owns it.
2. Wait for the mirror, or force it with **Settings → Repository → Mirror
Settings → Synchronize Now** in Gitea.
3. `git ls-remote --tags https://github.com/mixeme/gosentry.git <tag>` — confirm
GitHub has it.
4. `gh release create <tag> --verify-tag …` — `--verify-tag` is the guard, not a
nicety: without it `gh` silently creates the doomed tag when the mirror has
not caught up yet.
Release notes and assets are GitHub-side metadata; a mirror push cannot touch
them, so once the release sits on a mirrored tag, later synchronisations leave
it alone. Two consequences follow. Moving a published tag in Gitea force-pushes
it on GitHub and leaves the release pointing at a different commit, and deleting
a published tag in Gitea destroys the GitHub release along with its uploaded
archives — neither is recoverable from the mirror side. Codeberg is unaffected:
its releases live in the same forge as its tags.
docs/PRE-RELEASE-PLAN.md
-207
View File
@@ -1,207 +0,0 @@
# Pre-Release Milestone Plan
This document tracks the work that takes GoSentry from the v0.4.0 architectural
milestone to a pre-release-ready build. It closes the remaining
[roadmap](ROADMAP.md) items (except packaging), wires up features that were
stubbed during the refactor, and cleans the tree of legacy/rename scaffolding.
The goal is a coherent, end-user-ready build: JSON storage, a real task-queue
policy, working failure notifications, no legacy code, proper icons, and an
end-user-focused README.
Confirmed decisions:
- **Storage:** switch to JSON. One-time YAML import for `gosentry.yaml` /
`jobs.yaml` (read once, rewrite as JSON). Drop all PySentry legacy entirely.
- **Task queue defaults:** execution mode = Parallel, overlap policy = Skip (both
selectable in Settings).
- **Fyne 2.7 upgrade:** included (enables tray-click-to-show).
- **Per-job success exit codes:** dropped (exit 0 = OK, non-zero = Failed).
## 1. Switch storage YAML → JSON
- `src/domain/config.go`, `src/domain/job.go`: replace every `yaml:"..."` struct
tag with `json:"..."` (Config, Job, JobsFile). Keep `omitempty` where used.
- `src/storage/store.go`: replace `writeYAML` with `writeJSON` using
`encoding/json` (`MarshalIndent(value, "", " ")` for human-editable files).
Replace the two `yaml.Unmarshal` calls with `json.Unmarshal`.
- `src/storage/paths.go`: `ConfigFileName = "gosentry.json"`,
`JobsFileName = "jobs.json"`. Remove `LegacyConfigFileName` (pysentry). Add
`legacyYAMLConfigFileName = "gosentry.yaml"` and
`legacyYAMLJobsFileName = "jobs.yaml"` for the import path.
- One-time YAML import in `store.go`:
- `loadOrCreateConfig`: if `gosentry.json` is absent but `gosentry.yaml`
exists, `yaml.Unmarshal` it through a private yaml-tagged shadow struct.
`OpenStore` already calls `SaveConfig` afterward, which writes JSON.
- `loadOrCreateJobs`: same pattern for `jobs.yaml` via a yaml-tagged shadow;
`OpenStore`'s `SaveJobs` rewrites as JSON.
- The old `.yaml` files are left on disk untouched (non-destructive).
- Keep `go.yaml.in/yaml/v4` in `go.mod` (now used only by the import path).
- Tests: `src/storage/store_test.go` — switch the write helper to JSON; replace
the pysentry migration test with one covering the YAML→JSON one-time import.
## 2. Task-queue execution settings
Reworks the run-dispatch model so the schedule keeps advancing even while a run
is in flight, which is what makes an overlap policy meaningful.
- `src/domain/config.go`: add `ExecutionMode` and `OverlapPolicy` (JSON tags) plus
exported constants (`ExecutionParallel`/`ExecutionSequential`,
`OverlapSkip`/`OverlapQueue`). Defaults in `loadOrCreateConfig` and
`validateConfig`: empty → `parallel` / `skip`.
- `src/domain/runtime.go`: add `Pending bool` to `JobRuntime` (a queued overlap).
- Dispatch logic (moved into `src/app/run.go`, see §9):
- `startRunLocked`: instead of zeroing `NextDue`, advance it to the next
occurrence while the display `NextRun` shows `"Running"`, so a due tick can
arrive during a run.
- `RunDue`: scan all due jobs. For each due, enabled job:
- already running → overlap policy: `skip` drops this occurrence; `queue`
sets `runtime.Pending = true`.
- not running → execution mode: `parallel` starts it immediately;
`sequential` starts it only if no job is currently running and none started
earlier in this tick.
- `executeRun`: on finish, if `runtime.Pending` and not paused and the mode
permits, clear `Pending` and start the job again immediately.
- Add `anyRunningLocked()` helper.
- `RunNow`: keep the already-running guard; in sequential mode also refuse if
another job is running.
- `src/ui/settings_view.go`: add a Queue group with `widget.Select` controls for
execution mode and overlap policy, wired into the saved config.
- Tests: extend `src/app/operations_test.go` for parallel/sequential/skip/queue,
reusing the fake-`runJob` seam and `StartWith(fakeClock)`.
## 3. Browse button for the Command field
- `src/ui/job_dialog.go`: wrap `commandEntry` in
`container.NewBorder(nil,nil,nil, browseBtn, commandEntry)` (same pattern as the
directory rows in `settings_view.go`) and pass the container as the Command
form item. The button opens a file picker.
- Add a `chooseFile(w, target)` helper in `src/ui/settings_view.go` using
`dialog.NewFileOpen`; on selection set the entry text to `uri.Path()`.
## 4. System notifications on failure
`Config.NotifyOnFailure` is stored but never acted on. Wire it to Fyne.
- Add `func (s *Service) ShouldNotifyOnFailure() bool` (reads config under `mu`).
- `src/ui/mainwindow.go`: in the existing `svc.Subscribe(...)` handler, when the
event is `RunRecorded` with `State == "Failed"`, a real-run trigger
(`Manual`/`Schedule`), and notifications enabled, call
`fyne.CurrentApp().SendNotification(...)`. The handler is already inside
`fyne.Do`.
- Update the Settings checkbox wording to drop the "reserved" note.
## 5. Application icons — small vs large
Assets present: `gosentry-icon-16x16.png` (small), `gosentry-icon-big.png`
(large), `gosentry.ico`.
- `assets/assets.go`: also embed the 16×16; add `IconSmall()`. Keep `Icon()`
(large) for the window/app and `IconBytes()` (large) for Linux desktop
integration.
- `src/ui/run.go`: window/app icon stays large.
- `src/ui/tray.go`: set the tray icon to the small variant via
`desk.SetSystemTrayIcon(assets.IconSmall())` (Fyne 2.7).
- Windows Explorer icon stays via `packaging/windows/gosentry.rc`; confirm
`gosentry.ico` has both a 16×16 and a large frame.
## 6. Fyne 2.6.3 → 2.7.x upgrade + tray click
- `go.mod`: bump `fyne.io/fyne/v2` to latest 2.7.x; `go get` + `go mod tidy`.
- Rebuild under MSYS2 UCRT64 (CGO); skim the 2.7 changelog for breaking changes.
- `src/ui/tray.go`: add `desk.SetSystemTrayWindow(w)` so left-click shows/focuses
the window; keep the "Show" menu item.
- Re-measure startup using the existing History "Started … in Xms" event and
append to [PERFORMANCE.md](PERFORMANCE.md).
## 7. Drop legacy + debug; prepare for pre-release
- PySentry removal:
- Legacy pysentry config path (done in §1).
- `src/platform/autostart/autostart_windows.go`: remove `legacyAutostartName`,
`cleanupLegacyRegistryAutostart`, `legacyRegistryAutostartExists`,
`parseRegistryRunValue`, and their use in `SetAutostart`/`AutostartStatus`.
- `src/platform/autostart/autostart_linux.go`: remove the legacy systemd +
desktop cleanup functions and their `Set`/`Status` calls.
- Delete the corresponding legacy tests; drop `readShortcutTarget` if unused.
- `.gitignore` / `.dockerignore`: drop the `pysentry.yaml` lines; add
`gosentry.json` / `jobs.json`; keep the `*.yaml` ignores for the import
window.
- Debug/diagnostics: confirm no `GOSENTRY_TIMING` code remains (docs only); keep
the lightweight startup History event (needed for §6).
- Stale artifacts: ensure `dist/` and `cmd/gosentry/*.syso` stay gitignored.
- Bump hardcoded `0.3.0` references to the current `0.4.0`/next pre-release
version in README/docs.
## 8. README split — end-user vs developer
- New `docs/DEVELOPMENT.md`: move Requirements (toolchain), Build (all variants),
Run From Source, Project Layout, and Dependencies/mirroring out of README.
- `README.md` keeps end-user content only: intro, Features, Storage, Schedules,
Using the App, Autostart, Troubleshooting (the VirtualBox/RDP OpenGL workaround
stays). Update YAML → JSON file names + examples, the new Queue settings, real
notifications wording, and version strings. Add a Documentation link list to
`docs/`.
## 9. Roadmap refactoring follow-ups
- Linux test build fix: move the Windows-only tests
(`TestShellCommandHidesWindow`, `TestShellCommandUsesWindowsSafeQuoting`, and
peers touching `SysProcAttr`/`windowsShellCommandLine`) from
`src/runner/runner_test.go` into a new `src/runner/runner_windows_test.go`
guarded by `//go:build windows`.
- File-size (soft) limits: split the run/dispatch code (`RunDue`, `RunNow`,
`startRunLocked`, `executeRun`, queue helpers) out of
`src/app/operations.go` into a new `src/app/run.go`. Optionally split
`src/ui/jobs_view.go` if a clean seam exists.
## 10. Drop per-job success-exit-codes feature
After removal the run outcome is: exit code 0 → `OK`, any non-zero → `Failed`.
- `src/domain/job.go`: remove the `SuccessExitCodes` field.
- `src/runner/exitcodes.go`: delete the file.
- `src/runner/runner.go` `runStateDetail`: drop the `acceptedExitCode` branch; a
non-zero `exec.ExitError` is always `Failed` with `Exit code %d`.
- `src/runner/logfile.go`: remove the `success_exit_codes` field.
- `src/app/format.go`: remove `DisplaySuccessExitCodes` (and its test).
- `src/app/operations.go`: drop the `success_exit_codes` lines from
`runningOutput` and the default in `normalizeJob`.
- `src/storage/store.go` `normalizeJobs`: drop the default.
- `src/ui/job_dialog.go`: remove the entry, form item, and save.
- `src/ui/jobs_view.go`: remove the label and detail row.
- Tests/docs: remove `TestParseExitCodes`,
`TestRunJobAcceptsConfiguredExitCode`, `TestRunJobRejectsUnconfiguredExitCode`,
the `success_exit_codes` log-content assertions, the store_test exit-code
fields/defaults, and the matching `docs/TESTS.md` rows.
- §1 import: legacy YAML jobs may carry `success_exit_codes`; the shadow struct
ignores it.
## Implementation order
1. Storage JSON + one-time import (§1) and exit-code removal (§10) — both touch
`domain/job.go` and `storage/store.go`.
2. PySentry removal (§7 autostart + ignores).
3. Queue model + settings (§2) and the `operations.go` → `run.go` split (§9).
4. Notifications (§4), Command Browse (§3).
5. Icons (§5).
6. Fyne 2.7 upgrade + tray click + startup re-measure (§6).
7. Linux test-build fix (§9).
8. README split + docs/version updates (§8, §7).
## Verification
- `go test ./...` must build and pass. Build with CGO under MSYS2 UCRT64 on
Windows (`scripts\test.bat`); the default Bash env has CGO off. Confirm the
Linux test build compiles (`GOOS=linux go vet ./...` where available).
- Manual smoke (Windows GUI): build via `scripts\build-windows.bat` and run.
- First run with an existing `gosentry.yaml`/`jobs.yaml` imports into JSON; a
fresh install creates JSON defaults.
- Job dialog: Browse picks a command path.
- Settings: Queue mode + overlap policy persist; failure notifications toggle;
a failing job (`exit 1`) raises a desktop notification when enabled.
- Queue behavior: a fast-schedule long-running job demonstrates skip vs queue;
parallel runs two due jobs at once; sequential serializes.
- Tray: left-click shows/focuses the window; tray uses the small icon, window
and taskbar use the large icon.
- Record the post-upgrade startup time and append to PERFORMANCE.md.
docs/PRE-RELEASE-TASKS.md
-133
View File
@@ -1,133 +0,0 @@
# Pre-Release Milestone — Task List
Execution checklist for [PRE-RELEASE-PLAN.md](PRE-RELEASE-PLAN.md). Each task names
the recommended model and thinking depth. `Model`: haiku / sonnet / opus.
`Thinking`: low / medium / high. Section numbers (§) reference the plan.
Build/test note: the GUI needs CGO + MSYS2 UCRT64; the default Bash env has CGO
off. Use `scripts\test.bat` / `scripts\build-windows.bat` on Windows.
## Phase 1 — Storage JSON + exit-code removal (§1, §10)
These land together because both edit `domain/job.go` and `storage/store.go`.
| Task | Description | Model | Thinking |
|------|-------------|-------|----------|
| P1.1 | `domain/job.go`, `domain/config.go`, `domain.JobsFile`: swap `yaml:"…"` tags for `json:"…"`, keep `omitempty`. | sonnet | low |
| P1.2 | `storage/store.go`: replace `writeYAML` with `writeJSON` (`json.MarshalIndent` 2-space); switch the two `Unmarshal` calls to `json`. | opus | high |
| P1.3 | `storage/paths.go`: rename files to `gosentry.json` / `jobs.json`; remove `LegacyConfigFileName`; add `legacyYAMLConfigFileName` / `legacyYAMLJobsFileName`. | sonnet | medium |
| P1.4 | One-time YAML import in `store.go`: read `gosentry.yaml` / `jobs.yaml` via private yaml-tagged shadow structs when JSON is absent; rely on existing `SaveConfig`/`SaveJobs` to rewrite as JSON. | opus | high |
| P1.5 | Drop `SuccessExitCodes` field; delete `runner/exitcodes.go`; simplify `runStateDetail` (0 = OK, non-zero = Failed); strip the field from `runner/logfile.go`, `app/format.go`, `app/operations.go` (`runningOutput`, `normalizeJob`), `storage/store.go` (`normalizeJobs`). | sonnet | medium |
| P1.6 | Update tests/docs: `storage/store_test.go` (JSON write helper + YAML-import test, drop pysentry-migration test), remove exit-code tests in `runner/runner_test.go` + `app/format_test.go`, update `docs/TESTS.md`. | sonnet | medium |
## Phase 2 — PySentry legacy removal (§7)
| Task | Description | Model | Thinking |
|------|-------------|-------|----------|
| P2.1 | `autostart_windows.go`: remove `legacyAutostartName`, `cleanupLegacyRegistryAutostart`, `legacyRegistryAutostartExists`, `parseRegistryRunValue`, and their use in `Set`/`Status`; drop `readShortcutTarget` if unused. | sonnet | medium |
| P2.2 | `autostart_linux.go`: remove legacy systemd + desktop cleanup functions and their `Set`/`Status` calls. | sonnet | medium |
| P2.3 | Delete the legacy tests in `autostart_windows_test.go` / `autostart_linux_test.go`. | haiku | low |
| P2.4 | `.gitignore` / `.dockerignore`: drop `pysentry.yaml`; add `gosentry.json` / `jobs.json`; keep `*.yaml` ignores for the import window. | haiku | low |
## Phase 3 — Task-queue model + settings (§2, §9 split)
| Task | Description | Model | Thinking |
|------|-------------|-------|----------|
| P3.1 | `domain/config.go`: add `ExecutionMode` / `OverlapPolicy` (+ JSON tags) and exported constants; defaults (`parallel` / `skip`) in `loadOrCreateConfig` and `validateConfig`. `domain/runtime.go`: add `Pending bool`. | sonnet | medium |
| P3.2 | Create `src/app/run.go`; move `RunDue`, `RunNow`, `startRunLocked`, `executeRun` and helpers out of `operations.go`. | sonnet | medium |
| P3.3 | Rework dispatch: `startRunLocked` advances `NextDue` instead of zeroing it; `RunDue` scans all due jobs and applies execution mode (parallel/sequential) + overlap policy (skip/queue); `executeRun` re-runs a `Pending` job; add `anyRunningLocked`; sequential guard in `RunNow`. | opus | high |
| P3.4 | `ui/settings_view.go`: add a Queue group with `widget.Select` for execution mode and overlap policy, wired into the saved config. | sonnet | medium |
| P3.5 | Extend `app/operations_test.go` (or new `run_test.go`): parallel multi-start, sequential serialization, skip drops overlap, queue re-runs after finish. Reuse fake-`runJob` + `StartWith(fakeClock)`. | opus | high |
## Phase 4 — Notifications + Command browse (§4, §3)
| Task | Description | Model | Thinking |
|------|-------------|-------|----------|
| P4.1 | Add `Service.ShouldNotifyOnFailure()` (reads config under `mu`); in `ui/mainwindow.go` listener, `SendNotification` on a failed real-run when enabled. Update Settings wording. | sonnet | medium |
| P4.2 | `ui/job_dialog.go`: wrap Command entry with a Browse button; add `chooseFile` helper (`dialog.NewFileOpen`) in `settings_view.go`. | sonnet | low |
## Phase 5 — Icons (§5)
| Task | Description | Model | Thinking |
|------|-------------|-------|----------|
| P5.1 | `assets/assets.go`: embed `gosentry-icon-16x16.png`; add `IconSmall()`; keep `Icon()`/`IconBytes()` (large). | haiku | low |
| P5.2 | Size-appropriate, transparent icons per platform. `ui/tray.go`: tray uses the small icon (Windows `IconSmallICO()` 16×16 `.ico`; Linux big PNG). `run.go`: Windows window/taskbar draws from multi-size `gosentry.ico` via the `GLFW_ICON` resource (hand-tuned 16 titlebar + large taskbar, so `a.SetIcon` is skipped); Linux titlebar uses `IconSmall()`. Verify `gosentry.ico` carries 16/32/48/256. | sonnet | low |
## Phase 6 — Fyne 2.7 upgrade + tray click (§6)
| Task | Description | Model | Thinking |
|------|-------------|-------|----------|
| P6.1 | `go.mod`: bump `fyne.io/fyne/v2` to 2.7.x (`go get` + `go mod tidy`); rebuild under MSYS2 UCRT64; review 2.7 changelog for breaking changes. | opus | high |
| P6.2 | `ui/tray.go`: add `desk.SetSystemTrayWindow(w)` for left-click-to-show; keep the "Show" menu item. | sonnet | low |
| P6.3 | Re-measure startup via the History "Started … in Xms" event; append the result to `docs/PERFORMANCE.md`. | haiku | low |
## Phase 7 — Roadmap follow-ups (§9)
| Task | Description | Model | Thinking |
|------|-------------|-------|----------|
| P7.1 | Move Windows-only runner tests (`TestShellCommandHidesWindow`, `TestShellCommandUsesWindowsSafeQuoting`, peers touching `SysProcAttr`/`windowsShellCommandLine`) into `runner/runner_windows_test.go` guarded by `//go:build windows`; confirm Linux test build compiles. | sonnet | medium |
## Phase 8 — Docs + version (§8, §7)
| Task | Description | Model | Thinking |
|------|-------------|-------|----------|
| P8.1 | New `docs/DEVELOPMENT.md`: move Requirements, Build, Run From Source, Project Layout, Dependencies/mirroring out of README. | sonnet | medium |
| P8.2 | Rewrite `README.md` for end users: Features, Storage (JSON), Schedules, Using the App, Queue settings, notifications, Autostart, Troubleshooting; add a Documentation link list; fix `0.3.0` → current version. | sonnet | medium |
| P8.3 | Update `docs/CHANGELOG.md`; mark the addressed `docs/ROADMAP.md` items done. | haiku | low |
---
## Completion checklist
### Phase 1 — Storage JSON + exit-code removal
- [x] P1.1 — JSON struct tags
- [x] P1.2 — `writeJSON` + JSON unmarshal
- [x] P1.3 — `gosentry.json` / `jobs.json` paths; drop pysentry name
- [x] P1.4 — One-time YAML import
- [x] P1.5 — Remove `SuccessExitCodes` across code
- [x] P1.6 — Update storage/runner/format tests + TESTS.md
### Phase 2 — PySentry legacy removal
- [x] P2.1 — Windows autostart legacy code
- [x] P2.2 — Linux autostart legacy code
- [x] P2.3 — Delete legacy autostart tests
- [x] P2.4 — `.gitignore` / `.dockerignore`
### Phase 3 — Task-queue model + settings
- [x] P3.1 — Config/runtime fields + defaults
- [x] P3.2 — Split dispatch into `app/run.go`
- [x] P3.3 — Rework `RunDue`/`executeRun` for mode + overlap policy
- [x] P3.4 — Settings Queue selects
- [x] P3.5 — Queue tests
### Phase 4 — Notifications + Command browse
- [x] P4.1 — Failure notifications
- [x] P4.2 — Command Browse button
### Phase 5 — Icons
- [x] P5.1 — Embed small icon + `IconSmall()`
- [x] P5.2 — Size-appropriate per-platform icons (tray small; window via `.ico`/`IconSmall`); verify `.ico`
### Phase 6 — Fyne 2.7 upgrade + tray click
- [x] P6.1 — Bump Fyne to 2.7.x; rebuild
- [x] P6.2 — `SetSystemTrayWindow` left-click-to-show
- [x] P6.3 — Re-measure startup → PERFORMANCE.md
### Phase 7 — Roadmap follow-ups
- [ ] P7.1 — Linux test build fix (build-tagged Windows tests)
### Phase 8 — Docs + version
- [ ] P8.1 — `docs/DEVELOPMENT.md`
- [ ] P8.2 — End-user README rewrite
- [ ] P8.3 — CHANGELOG + ROADMAP updates
## Definition of done
- `go vet ./...` clean; `go test ./...` green on Windows and Linux (CGO on).
- Storage reads/writes JSON; an existing `*.yaml` install imports once into JSON.
- Queue execution mode + overlap policy are configurable and exercised by tests.
- A failed real run raises a desktop notification when enabled.
- Tray left-click shows the window; tray uses the small icon, window/taskbar the
large one.
- No PySentry legacy code remains; README is end-user-focused with dev docs split
into `docs/DEVELOPMENT.md`.
docs/ROADMAP.md
+208 -79
View File
@@ -1,101 +1,230 @@
# Roadmap # Roadmap
This file tracks planned GoSentry work that is larger than a single bug fix. This file tracks planned GoSentry work that is larger than a single bug fix.
Completed work is recorded in [CHANGELOG.md](CHANGELOG.md), not here.
## Refactoring Follow-Ups ## Open Items
Loose ends found while verifying the [refactoring plan](REFACTORING.md) against ### Faster Windows failure notifications
its Definition of done. The architecture target is reached and verified on
Windows, but the items below remain.
- **Linux test build is broken (correctness, not cosmetic).** `src/runner/runner_test.go` Fyne `SendNotification` on Windows does not call WinRT directly. Each toast
is a shared (untagged) test file that references Windows-only symbols writes a short script to `%TEMP%` and runs it through a **new PowerShell
(`SysProcAttr.HideWindow`, `SysProcAttr.CmdLine`, `windowsShellCommandLine`). process** (`app/app_windows.go`), which typically adds **1–3 seconds** of cold
The `runtime.GOOS != "windows"` guards are runtime skips and cannot save a file start before the toast appears. GoSentry's own path from run completion through
that does not *compile*, so `go test ./...` fails to build on Linux. This `SendNotification` is much smaller and is logged separately.
contradicts T5.4 ("go test -race clean on both platforms") and the DoD's
"green on Windows and Linux." Fix: move the Windows-only tests
(`TestShellCommandHidesWindow`, `TestShellCommandUsesWindowsSafeQuoting`, and any
peers touching `SysProcAttr` / `windowsShellCommandLine`) into a new
`src/runner/runner_windows_test.go` guarded by `//go:build windows`.
- **File-size guidelines exceeded.** The DoD asks for no `src/ui` file over ~250
lines and no single file over ~400:
- `src/ui/jobs_view.go` — 415 lines (over both the ~250 UI target and the ~400 cap).
- `src/app/operations.go` — 486 lines (over ~400).
- `src/app/operations_test.go` (536) and `src/runner/runner_test.go` (421) also
exceed 400 if the cap is read to include test files.
These are soft ("~") limits; revisit when next touching those files rather than **Baseline (2026-08-05, `scripts/measure-windows-toast.ps1`, 3 runs on dev
splitting purely for line count. machine):** average **773 ms** per toast (695–874 ms), dominated by PowerShell
cold start. Re-run the script when comparing after a native toast implementation.
## Post-Field-Test Cleanup **App-side timing:** each failure notification appends one line to
`logs/notify-timing.tsv` (`ms_after_run`, `ms_fyne_do`, `ms_send`,
`ms_app_total`). These columns end when Fyne returns from `SendNotification`; OS
toast latency is not included. The `.tsv` extension keeps it out of
`runner.CleanupLogs`, which only manages `.log` files — this file is
diagnostic instrumentation for this item, not job output, and should be
removed (or unified with the run-log retention policy under its own knob) once
the native-toast direction below lands and the timing data is no longer
needed.
After real-world use confirms the main workflows, clean up temporary **Direction:** add `src/platform/notify/` with a native Windows toast (WinRT or
stabilization code and development scaffolding. a maintained Go wrapper), used for failure notifications on Windows. Keep Fyne
`SendNotification` on Linux (DBus / xdg-desktop-portal) unless profiling shows it
needs the same treatment.
Cleanup checklist: ### Retire the config compatibility shims
- Review and remove debug-oriented diagnostics that are no longer useful. Two read-only shims in `storage.loadOrCreateConfig` rewrite an old file into
- Remove excessive defensive checks once behavior is proven and covered by the the current shape on the next save, so each becomes dead the moment a user's
right tests. config has been saved once by a build that has it:
- Remove obsolete compatibility cleanup, such as old autostart migration code,
after the transition window is over.
- Delete stale generated files and old build artifacts from local/release flows.
- Revisit tests and remove ones that only lock in temporary implementation
details instead of real user-facing behavior.
- Simplify README notes that were useful during early setup but are too noisy
for normal users.
- Recheck `.gitignore`, Docker scripts, and packaging scripts for rules or
branches that only supported early experiments.
## Tray Interaction - `Config.JobsDir` (pre-0.15, superseded by `Config.JobsFile`).
- `Theme == "default"` (pre-1.0.1, superseded by `ThemeSystem`).
Improve tray icon interaction: click the tray icon to show and focus the main Neither has an expiry. Remove both — the field, the migration branch, and
window. `TestLoadOrCreateConfigMigratesJobsDir` /
`TestLoadOrCreateConfigMigratesLegacyThemeDefault` — once a release has shipped
long enough that a config file still carrying either old shape is not a
realistic upgrade path GoSentry needs to support.
- Unblocked by Fyne 2.7.0, which added `desktop.App.SetSystemTrayWindow(window)`. ### Dynamic tray icon toggle
On Windows, macOS, and most Linux it shows the associated window on left-click;
any tray menu then moves to right-click. There is still no raw click /
double-click callback, so the behavior is single left-click (the conventional
tray gesture), not the double-click originally sketched here.
- The project is currently on Fyne 2.6.3, so this depends on a Fyne 2.6.3 -> 2.7.x
upgrade first (minor bump; re-verify the CGO build under MSYS2 UCRT64 and check
for 2.7 breaking changes). Track the upgrade as its own task.
- As part of that upgrade, **re-measure startup time** with the `GOSENTRY_TIMING`
method recorded in [PERFORMANCE.md](PERFORMANCE.md). The Fyne 2.5.3 -> 2.6.3 bump
added ~290 ms to startup, all inside `w.Show()`; check whether 2.7 recovers any
of it or holds steady, and append the result to PERFORMANCE.md.
- After upgrading, the change in `src/ui/run.go` (configureSystemTray) is small:
call `desk.SetSystemTrayWindow(w)` alongside `SetSystemTrayMenu(menu)`. Keep the
existing "Show" menu item, which the Fyne docs recommend for less-compliant
Linux systems.
## Delivery And Packaging Fyne exposes `SetSystemTrayIcon` and related APIs only at application startup.
There is no supported way to register or remove the notification-area icon
after the process is running.
Keep a single portable binary as the baseline delivery format. It is simple to GoSentry now honours `KeepRunningInTray` from config: close behaviour and the
test, easy to copy between machines, and matches the current storage model where autostart entry update immediately when the user saves Settings; the tray icon
runtime YAML files live next to the executable by default. follows the saved value on the next launch. Settings shows a restart hint when
the tray checkbox changes.
Planned delivery variants: Revisit when Fyne adds a documented API for mid-session tray registration, or
when a stable cross-platform approach exists without reaching into driver
internals. Until then, removing the restart hint and applying the icon on save
is blocked.
- Windows portable `.zip` with `gosentry.exe`, `README.md`, and `CHANGELOG.md`. ### Update check from GitHub releases
- Linux portable `.tar.gz` archives for `linux-amd64` and `linux-arm64`.
- Debian/Ubuntu `.deb` package once the Linux runtime paths are settled.
- Windows installer later, likely Inno Setup first and MSI/WiX only if needed.
- AppImage as a possible Linux GUI-friendly format after the core workflow is stable.
- Flatpak only after the desktop integration story is clearer.
- winget manifest after stable public Windows releases exist.
Packaging design note: Releases are published as GitHub Releases (tags like `v0.12.0`, built by
`.github/workflows/release.yml`), but the app never tells the user a newer
version exists — they have to check the releases page by hand.
- Portable builds can keep settings and jobs next to the executable. Add an update check that queries the GitHub Releases API
- Installer/package builds should move runtime data to per-user locations: (`GET /repos/mixeme/gosentry/releases/latest`) for the latest published tag,
`%APPDATA%\GoSentry` on Windows, and XDG directories such as strips the leading `v`, and compares it against `app.Version`. When a newer
`~/.config/gosentry` and `~/.local/share/gosentry` on Linux. version is available, surface it non-intrusively — an "Update available"
line in Settings (next to the existing version/build info) with a hyperlink
to the release page, not a modal on launch.
Initial priority: Design notes / open questions:
1. Windows portable `.zip`. - *Opt-in and offline-safe.* The check makes a network request, so it must be
2. Linux portable `.tar.gz` for amd64 and arm64. off by default (or clearly consented) and never block startup. Failures
3. Debian/Ubuntu `.deb`. (offline, rate-limited, API change) should be silent — no error dialogs for a
4. Windows installer. best-effort convenience feature.
- *Version comparison.* Compare semantic versions, not strings, so `0.12.0`
reads as newer than `0.9.0`. A tiny semver comparator in `app` (or a small
dependency) avoids lexical bugs.
- *Where the check lives.* Keep it in the `app` layer behind the Service so the
UI only renders the result, and cache the last check so opening Settings
repeatedly does not spam the API (unauthenticated GitHub allows 60 req/h).
- *Repo coordinates.* The primary remote is Gitea; the GitHub repo used for
releases is [`mixeme/gosentry`](https://github.com/mixeme/gosentry) and must
be wired in explicitly (constant or build-time value) rather than derived from
`origin`.
- *No auto-download.* Scope is detection and notification only; installing the
update stays a manual click-through to the release page.
### Import/export jobs as a cron table
Jobs can only be moved between machines by copying `jobs.json` by hand. Add
"Import" / "Export" actions (Settings tab, file dialogs) that read and write a
crontab-style text file, so a job list can be shared, version-controlled, or
seeded from an existing Unix crontab.
Export writes one line per job — schedule fields, then command and arguments —
and import parses the same format back into `domain.Job` values.
Design notes / open questions:
- *The job model is wider than a crontab line.* `Name`, `Folder`, `StartOnly`,
`OverlapPolicy`, `TimeoutSeconds`, and `Enabled` have no cron equivalent.
Either accept a lossy export (schedule + command only) or carry the extra
fields in a structured comment above each line (`# gosentry: name=… folder=…
timeout=…`), which keeps the file readable by real cron while making the
round-trip lossless. The comment form is preferred; decide the exact key set
before implementing.
- *Disabled jobs.* `Enabled: false` maps naturally to a commented-out line, but
then a disabled job is indistinguishable from a user's own comment unless the
`# gosentry:` marker is present. Pick one representation and document it.
- *`@every` is not crontab.* GoSentry accepts `@every 10s` (see
[`domain.Parse`](../src/domain/schedule.go)), which no cron implementation
understands. Exporting it produces a file that is not a valid crontab;
exporting it as an approximation would silently change the schedule. Keep the
raw string and flag the file as GoSentry-flavoured, rather than converting.
- *Command vs arguments.* Crontab has a single command string; GoSentry splits
`Command` and `Arguments`. Import must split the line the same way the runner
would (see `runner/invocation*.go`, which differs per OS), and export must
join them back without changing quoting.
- *What to skip on import.* Environment assignments (`SHELL=`, `PATH=`,
`MAILTO=`), six-field (seconds) crontabs, and `@reboot` are outside what
`domain.Parse` accepts. Skip them, and report which lines were skipped and
why — a partial import that silently drops rows is worse than a failed one.
- *Merge semantics.* Import must decide between replacing the job list and
appending to it, and must assign fresh IDs rather than trusting the file.
Appending with a confirmation dialog is the safer default; replacing needs an
explicit "this deletes N jobs" confirmation.
- *Where it lives.* Encoding/decoding is pure text handling and belongs in
`domain` (or a small `storage` codec) with unit tests over round-trips; the
Service exposes import/export operations; the UI only picks the file and
shows the outcome.
### Split the files that are over the size guideline
[ARCHITECTURE.md](ARCHITECTURE.md) sets a ~250-line guideline per source file
and records the `jobs_view.go` and `settings_view.go` splits as the worked
examples. `jobs_view.go` was split again in 1.0.3 — into view, state, list, and
toolbar — because the selection defect it carried was a symptom of the size
(one 330-line constructor over seven shared locals). Six non-test files are
over the guideline:
| File | Lines |
|------|-------|
| `src/app/operations.go` | 529 |
| `src/storage/store.go` | 382 |
| `src/ui/history_view.go` | 355 |
| `src/ui/settings_view.go` | 326 |
| `src/app/run.go` | 275 |
| `src/app/service.go` | 252 |
The remaining six are deliberately deferred rather than done piecemeal: a
split touches every reader of the file, and doing them in one pass keeps the
seams consistent instead of settling each one its own way. Splitting is
also the kind of change that reads as pure movement while quietly dropping a
function, so it wants one careful pass, not a hurried one per file.
Seams visible today, as a starting point rather than a decision:
- **`operations.go`** — the worst overage and the clearest split: the public
mutating operations (`CreateJob` … `UpdateSettings`), the `…Locked` state
helpers that only they call, and the pure validators and normalizers
(`normalizeJob`, `validateJob`, `hasFileName`, `validateConfig`) are three
distinct jobs already sitting in three consecutive blocks.
- **`history_view.go`** — the column-measuring helpers (`textWidth` through
`historyColumnWidths`) are pure, already unit-tested, and independent of the
table they size.
- **`store.go`** — path resolution, the config load/normalize path, and the jobs
load/normalize path are three separate concerns in one file.
- **`run.go`**, **`settings_view.go`**, **`service.go`** — barely over. Worth
re-measuring at the time; if a pass elsewhere has shrunk them, leave them
alone rather than splitting for the sake of the number. The counts above move
a few lines either way with any edit, so re-measure before acting on them
rather than treating the table as current.
The `jobs_view.go` pass is the worked example for the rest: the constructor was
broken up along the state it shared, not along line count, and the split landed
with the selection fix rather than promising it separately.
Scope note: the guideline is about source files. Test files are much larger and
that is fine — a table-driven test file grows with the cases it covers.
### Window size persistence *(frozen)*
Window size is currently **not** saved on quit or close. Saving was disabled
because `w.Canvas().Size()` returns the maximized dimensions when the window is
maximized, which would corrupt the stored size on the next launch.
Re-enabling requires a cross-platform way to detect the maximized state before
saving. Fyne v2.x has no API for this; it needs per-OS native calls:
`IsZoomed` (Windows), `_NET_WM_STATE` (X11/Linux), `NSWindow.isZoomed`
(macOS). Unfreeze once that detection is in place.
**Disadvantages of a platform-specific approach:**
- *Three separate implementations.* Windows, macOS, and Linux each need their
own file guarded by a build tag. Each adds CGO bindings or raw syscall
wrappers that must be kept in sync as OS APIs evolve.
- *Linux is not one target.* X11 and Wayland have completely different window
state models. `_NET_WM_STATE` is X11-only; under Wayland the compositor
controls window decorations and there is no stable client-side API to query
the maximized state. A single `linux` build tag cannot cover both correctly.
- *Native window handle is not exposed.* Fyne does not surface the underlying
`HWND` / `NSWindow` / `XID` through its public API. Obtaining it requires
either enumerating OS-level windows by PID (fragile, finds wrong windows when
dialogs are open) or reaching into Fyne/GLFW internals (breaks on Fyne
upgrades).
- *Thread-safety constraints.* Win32 and GLFW both require their calls to be
made from the OS main thread. Tray-menu callbacks run on a separate goroutine,
so any native call must be marshalled back to the main thread, adding
synchronisation complexity.
- *Test coverage gap.* Maximized-state detection cannot be exercised by Fyne's
headless test driver; it requires a real display and manual or screen-capture
automation per platform.
### History tab — column filters (Trigger / Job / State)
Add dropdown filters above the History table so the user can narrow rows by
trigger source, job name, or run state. Blocked on Fyne native support: the
current `widget.Table` has no built-in filter API, and a filter bar built from
`widget.Select` widgets above the table feels visually out-of-place. Revisit
when Fyne adds first-class column filtering or a composable data-grid widget.
docs/STANDARDS.md
+145
View File
@@ -0,0 +1,145 @@
# GoSentry — Standards
Quality rules and intentional behavior for contributors. Package contracts live
in [ARCHITECTURE.md](ARCHITECTURE.md); test conventions in [TESTS.md](TESTS.md).
## Code quality
- Follow package contracts in [ARCHITECTURE.md](ARCHITECTURE.md).
- User-facing errors → `dialog.ShowError` or a History event, never a silent `return`.
- Pure helpers → unit test in the same package.
- Fixes with severity ≥ medium → regression test.
- Documented intentional behavior → section below, not a backlog bug.
- UI view constructors accept `*app.Service`; call `app.Open()` only from `run.go`.
- **No blocking file I/O under `Service.mu`.** It is the lock the Fyne main
thread takes on every `Jobs()` and `Runtime()` call, so a JSON write, a
log-directory scan, or a pass over every log header inside it makes a UI
refresh wait on the disk. Mutate state under the lock, snapshot what the I/O
needs, and run the I/O after `mu.Unlock()` — the way `emit()` already is.
Store writes go through `Service.deferSaveLocked` and `Store.PrepareSaveJobs` /
`Store.PrepareSaveConfig`, which take `saveMu` while `mu` is still held so
writes still reach the file in the order their snapshots were taken; log
cleanup and `runner.SeedStats` run from plain snapshots.
- A size that must follow the theme is **measured at build time, not written as
a pixel constant.** `theme.Padding()` and text metrics depend on the running
app's theme, text size, and DPI, so a hand-tuned number is only correct for
the one theme it was tuned against and clips under any other. Measure the real
widget, or derive the value from the theme, in a named helper: `rowOverlap`
(theme padding), `captionColumnWidth` and `textColumnWidth` (the widest of the
actual strings), `activityRowsHeight` (the list's own row template). The same
applies to a ratio computed from an absolute width — see `initialSplitOffset`.
A raw pixel literal is left only where nothing about it tracks the theme, and
says so in a comment.
## Config file compatibility
There is no migration step: `gosentry.json` and `jobs.json` are read as-is, are
meant to be hand-editable, and may have been written by an older version. A
change to their shape has to stay compatible on its own.
- A new `Config` field is tagged `omitempty`, and its zero value must mean the
behavior that existed before the field was added — a file written without it
keeps working unchanged. `DefaultConfig()` still sets the value explicitly.
- A zero that carries meaning is not a missing field and must not be backfilled
on load. See `DefaultTimeoutSeconds` in `storage.loadOrCreateConfig` and
`Job.TimeoutSeconds *int`, where unset and `0` are different answers.
- An unrecognised enum value reads as the default rather than an error, through
one helper that every consumer shares (`JobListView.IsCompact`, `ui.themeFor`),
and is normalized before being written back, so the file never gains a value
no reader understands.
- A renamed key keeps the old field on `Config` (tagged `omitempty`) purely so
it can still be read. `storage.loadOrCreateConfig` converts it to the new
field and clears it, so the retired key disappears on the next save. See
`Config.JobsDir` → `Config.JobsFile`. Where the new field has a non-empty
default, clear that default before unmarshalling, or "the file omits it" and
"the file sets it" become indistinguishable and the conversion never runs.
- Each of the three gets a test: the default in `storage`, the normalization in
`domain`, and a round-trip through the real config file in `app`.
## Intentional behavior (not bugs)
- `RunNow` is allowed during global pause and for disabled jobs.
- Selecting a jobs file that already exists **loads** it: its jobs replace the
in-memory list, which is the only way the user can switch between job lists. A
path with no file behind it receives the current jobs (rename/relocate). The
switch is refused while a job is running, because adoption drops every runtime
and a finishing run would then write its result onto whichever job inherited
its ID.
- Sequential mode runs jobs FIFO by order in `jobs.json`.
- Scheduler tick is 1s — sub-second `@every` intervals are not supported.
- Command timeout defaults to no timeout globally (`Config.DefaultTimeoutSeconds`
= 0) and is overridable per job (`Job.TimeoutSeconds *int`: unset = inherit the
global default, 0 = no timeout, positive = seconds). Neither zero may be
normalized away on load — 0 is a value, not a missing field.
- **`Config.MaxLogFiles` and `Config.MaxLogAgeDays` of 0 mean "keep everything",
not "unset".** `runner.CleanupLogs` already treated `<= 0` as "policy
disabled"; `app.validateConfig` and the Settings form now accept 0 (only a
negative count is rejected), and `storage.loadOrCreateConfig` no longer
backfills 0 to 100 / 30 — a config written before either field existed still
picks up the default because `json.Unmarshal` leaves an absent key holding
whatever `DefaultConfig()` set, the same mechanism `DefaultTimeoutSeconds`
relies on.
- **A `StartOnly` process is expected to outlive GoSentry.** The option exists to
launch something and let go of it, so the runner builds that invocation on
`context.Background()`, not on the application's lifecycle context: quitting
GoSentry (or cancelling a run) does not stop a process it started this way, and
`Service.Stop()` reaches only jobs the runner is still waiting on. The
uncancelable context is also what keeps `os/exec` from leaving a watcher
goroutine per run — it only starts one when the context can be done, and
`StartOnly` never calls `Wait` to end it.
- **History tab is session-only.** `JobRuntime.Logs` exists only in memory for the
current process. Log files on disk feed aggregate statistics via `SeedStats`
only. See [ARCHITECTURE.md](ARCHITECTURE.md).
- **History is capped and its columns only widen.** The tab keeps the newest
`maxHistoryRows` records and drops the oldest, the way `maxJobLogs` caps a
job's own activity list — an app left in the tray records thousands of runs a
day, each carrying the run's full captured output. Column widths are folded in
one record at a time instead of rescanned from every row, so a column never
narrows when a record ages out: the rows on screen were laid out against the
wider value. A theme change is the one case that rescans, because every stored
width was measured at the old text size.
- Several tests share a coverage profile with another test on purpose, and a few
functions sit at 0% on purpose. Both lists live in
[TESTS.md](TESTS.md) — check them before reporting a test as redundant or a
coverage gap as an oversight.
- **`KeepRunningInTray` controls tray and close behavior.** When enabled (the
default), the app registers a system tray icon at launch, closing the window
hides it, and autostart passes `--start-in-tray`. When disabled, no tray icon
is registered at launch, closing the window quits the app, and autostart opens
the main window. Toggling the setting in Settings updates close behavior and
rewrites the autostart entry immediately; the tray icon itself follows the
saved value only after a restart because Fyne has no API to add or remove it
mid-session (see [ROADMAP.md](ROADMAP.md)).
- **`--start-in-tray` defers to config.** A stale autostart shortcut that still
passes the flag does not hide the window when `KeepRunningInTray` is off.
- **`JobRuntime.PendingRuns` (the "queue" overlap policy's backlog) is capped at
`maxPendingRuns` (10) and cleared on pause or disable.** A job whose runs take
longer than its interval stops accumulating backlog once the cap is hit —
further overlaps are dropped like the "skip" policy until the backlog drains
below the cap. `SetGlobalPause(true)` and `SetEnabled(id, false)` both zero
the counter, so resuming or re-enabling a job never replays a deferred run for
an occurrence that fired before the pause/disable. The details pane appends
", N queued" to the statistics line via `DisplayStats` whenever the count is
non-zero.
- **Single-instance arbitration falls back to "start anyway" when the port is
held by something else.** `acquireSingleInstance` (`singleinstance.go`)
binds `127.0.0.1:37653`; if that fails and a dial to the same address does
not answer as GoSentry either, startup continues rather than refusing to
open because of an unrelated local listener. The consequence is deliberate
but worth spelling out: two GoSentry processes can then run two schedulers
against the same `jobs.json` and the same logs directory, each overwriting
the other's saves. Atomic writes (`writeFileAtomic`) prevent a *torn* file
from a concurrent write, but not one process's save clobbering the other's.
- **The single-instance channel is an unauthenticated localhost TCP port.**
Port 37653 accepts one command, `"show"`, from any local process — including
one running as a different user on a shared machine. This is a deliberate
scope choice, not an oversight: the command only raises the existing window,
so the impact of an unwelcome sender is a window popping up, not data
exposure or control. Anything with a larger blast radius on that channel
would need real authentication.
## Out of scope
Larger or blocked work is tracked in [ROADMAP.md](ROADMAP.md) (update check from
GitHub releases, cron-table import/export, window size persistence, History
column filters).
docs/TESTS.md
+387 -32
View File
@@ -22,6 +22,16 @@ Both scripts run:
1. `go vet ./...` — static analysis for common errors and suspicious code patterns 1. `go vet ./...` — static analysis for common errors and suspicious code patterns
2. `go test -race ./...` — tests with race condition detection enabled 2. `go test -race ./...` — tests with race condition detection enabled
The GUI tests build the Fyne desktop backend, so CGO must be enabled; on Windows
that means the MSYS2 UCRT64 toolchain described in
[DEVELOPMENT.md](DEVELOPMENT.md).
`src/ui` dominates `go test -race ./...`'s wall time — around 229s in the
2026-08-05 whole-project review, against under 8s for every other package
combined. Budget iteration accordingly: a change confined to `domain`,
`storage`, `runner`, `scheduler`, or `app` gets a fast feedback loop; a `ui`
change does not.
### Manual test commands ### Manual test commands
Run all tests: Run all tests:
@@ -51,6 +61,37 @@ go test -coverprofile=coverage.out ./src/runner
go tool cover -html=coverage.out go tool cover -html=coverage.out
``` ```
Per-package coverage understates the suite, because several packages are
exercised from another one's tests — `domain.NewRuntime`, for instance, is
covered by the `app` tests. Measure the engine packages together instead:
```bash
go test -coverprofile=cover.out -coverpkg=./src/domain,./src/storage,./src/runner,./src/scheduler,./src/app ./src/domain ./src/storage ./src/runner ./src/scheduler ./src/app
```
In the PowerShell environment DEVELOPMENT.md prescribes on Windows, PowerShell
splits the comma-separated `-coverpkg` list on its own and the command fails
with `directory not found`. Use the stop-parsing token, or quote the whole
flag — and note that `--%` swallows the rest of the line, so the profile has to
be read by a second command:
```powershell
go test --% -coverprofile=cover.out -coverpkg=./src/domain,./src/storage,./src/runner,./src/scheduler,./src/app ./src/domain ./src/storage ./src/runner ./src/scheduler ./src/app
```
The total is the last line of the profile summary. It is **not** any of the
per-package lines `go test` prints: with `-coverpkg` spanning five packages,
each of those reports only what that one package's tests reached across the
whole set, so all five are far below the real figure.
```powershell
go tool cover -func=cover.out | Select-Object -Last 1
```
That total was 84.4% at the 2026-08-04 review and 84.1% at the 2026-08-07
documentation audit — the number to compare against before concluding that
coverage has slipped.
--- ---
## Test Files Overview ## Test Files Overview
@@ -74,6 +115,20 @@ Tests schedule parsing and validation.
--- ---
### src/domain/config_test.go
**Package:** `domain`
Tests autostart argument helpers and the jobs-list density normalization rule.
| Test | Purpose |
|------|---------|
| `TestAutostartArguments` | Verifies `AutostartArguments` returns `--start-in-tray` when the tray is enabled and an empty string when it is off. |
| `TestResolveStartHidden` | Verifies hidden autostart requires both the CLI flag and `KeepRunningInTray`. |
| `TestJobListViewIsCompact` | Verifies only the exact `"compact"` value selects one-line rows: empty, differently-cased, and unrecognised values all read as detailed. |
---
### src/app/service_test.go ### src/app/service_test.go
**Package:** `app` **Package:** `app`
@@ -84,7 +139,6 @@ Tests `Service` construction and the state-accessor contract.
|------|---------| |------|---------|
| `TestNewServiceBuildsRuntimePerJob` | Verifies that `NewService` creates a `JobRuntime` entry for every loaded job. | | `TestNewServiceBuildsRuntimePerJob` | Verifies that `NewService` creates a `JobRuntime` entry for every loaded job. |
| `TestJobsReturnsCopy` | Verifies that `Service.Jobs` returns a defensive copy so callers cannot mutate internal state. | | `TestJobsReturnsCopy` | Verifies that `Service.Jobs` returns a defensive copy so callers cannot mutate internal state. |
| `TestStoreReturnsWiredStore` | Verifies that `Service.Store` returns the injected `storage.Store`. |
--- ---
@@ -108,19 +162,22 @@ Tests all mutating operations on the Service, scheduler integration, and setting
| `TestDeleteJobNotFound` | Verifies that `DeleteJob` returns an error for an unknown job ID. | | `TestDeleteJobNotFound` | Verifies that `DeleteJob` returns an error for an unknown job ID. |
| `TestSetEnabledNotFound` | Verifies that `SetEnabled` returns an error for an unknown job ID. | | `TestSetEnabledNotFound` | Verifies that `SetEnabled` returns an error for an unknown job ID. |
| `TestSetEnabledToggles` | Verifies that `SetEnabled` flips the enabled flag and persists the change. | | `TestSetEnabledToggles` | Verifies that `SetEnabled` flips the enabled flag and persists the change. |
| `TestSetEnabledClearsPendingRuns` | Verifies that disabling a job zeroes a `PendingRuns` backlog it was carrying, so re-enabling it later does not replay a stale deferred run. |
#### Global pause / run-now / run-due #### Global pause / run-now / run-due
| Test | Purpose | | Test | Purpose |
|------|---------| |------|---------|
| `TestSetGlobalPauseUpdatesRuntimesAndEmits` | Verifies that `SetGlobalPause` updates all job runtimes, emits `SchedulerStateChanged`, and persists state. | | `TestSetGlobalPauseUpdatesRuntimesAndEmits` | Verifies that `SetGlobalPause` updates all job runtimes, emits `SchedulerStateChanged`, and persists state. |
| `TestSetGlobalPausePersistsToConfigFile` | Verifies the paused flag reaches `gosentry.json`, which is what makes the pause survive a restart. |
| `TestServiceRebuiltFromPausedStoreStartsPaused` | Verifies a Service built from a paused config starts paused, with the paused next-run text applied before the first tick. |
| `TestRunNowUsesRunnerAndRecords` | Verifies that `RunNow` invokes the runner, records a `RunRecord`, and emits `RunRecorded`. | | `TestRunNowUsesRunnerAndRecords` | Verifies that `RunNow` invokes the runner, records a `RunRecord`, and emits `RunRecorded`. |
| `TestRunNowNotFound` | Verifies that `RunNow` returns an error for an unknown job ID. | | `TestRunNowNotFound` | Verifies that `RunNow` returns an error for an unknown job ID. |
| `TestRunNowRefusedWhileAlreadyRunning` | Verifies that a second concurrent `RunNow` on the same job is rejected while the first is in progress. | | `TestRunNowRefusedWhileAlreadyRunning` | Verifies that a second concurrent `RunNow` on the same job is rejected while the first is in progress. |
| `TestRunNowRefusedWhilePaused` | Verifies that `RunNow` is rejected when the global pause flag is set. | | `TestRunNowAllowedWhilePaused` | Verifies that `RunNow` is allowed when the global pause flag is set (pause stops scheduled runs only). |
| `TestRunDueStartsDueJob` | Verifies that `RunDue` launches a job whose next-run time has passed. | | `TestRunDueStartsDueJob` | Verifies that `RunDue` launches a job whose next-run time has passed. |
| `TestRunDueSkipsJobNotYetDue` | Verifies that `RunDue` does not launch a job that is not yet due. | | `TestRunDueSkipsJobNotYetDue` | Verifies that `RunDue` does not launch a job that is not yet due. |
| `TestRunDueSkipsJobInRunningState` | Verifies that `RunDue` does not start a second concurrent run for an already-running job. | | `TestRunDueSkipsJobInRunningState` | Verifies that `RunDue` does not start a second concurrent run for an already-running job, even with a stale `NextDue` in the past. |
| `TestRunDueDoesNothingWhilePaused` | Verifies that `RunDue` launches nothing when the global pause flag is set. | | `TestRunDueDoesNothingWhilePaused` | Verifies that `RunDue` launches nothing when the global pause flag is set. |
| `TestStartDrivesRunDueOnTick` | Verifies that `Service.Start` wires `RunDue` to the scheduler tick and that each tick advances state. | | `TestStartDrivesRunDueOnTick` | Verifies that `Service.Start` wires `RunDue` to the scheduler tick and that each tick advances state. |
@@ -130,10 +187,44 @@ Tests all mutating operations on the Service, scheduler integration, and setting
|------|---------| |------|---------|
| `TestUpdateSettingsPersistsAndValidates` | Verifies that `UpdateSettings` persists a valid config and rewrites autostart if needed. | | `TestUpdateSettingsPersistsAndValidates` | Verifies that `UpdateSettings` persists a valid config and rewrites autostart if needed. |
| `TestUpdateSettingsRejectsInvalidConfigs` | Verifies that `UpdateSettings` returns validation errors without persisting. | | `TestUpdateSettingsRejectsInvalidConfigs` | Verifies that `UpdateSettings` returns validation errors without persisting. |
| `TestHasFileName` | Verifies the jobs-file path check: a file name passes; a trailing separator, `.`, and `..` do not. |
| `TestUpdateSettingsWritesJobsToTheNewFile` | Verifies that changing `JobsFile` re-resolves `Paths.JobsPath` and writes the loaded jobs to the new file, creating its folder. |
| `TestUpdateSettingsAdoptsExistingJobsFile` | Verifies that selecting a jobs file that already exists replaces the job list with its contents, rebuilds runtimes, and emits `JobsLoaded`. |
| `TestUpdateSettingsKeepsJobsWhenTheNewFileIsMissing` | Verifies that a path with no file behind it receives the current jobs instead (the rename/relocate case). |
| `TestUpdateSettingsRefusesJobsFileSwitchWhileRunning` | Verifies that switching the jobs file is refused (and not persisted) while a job runs, while unrelated settings still save. |
| `TestUpdateSettingsSeedsAdoptedJobsFromLogs` | Verifies that statistics reconstructed from the new logs directory still reach the runtime map, now that the log scan happens before `UpdateSettings` takes `mu`. |
| `TestConcurrentJobOperationsLeaveTheFileMatchingMemory` | Verifies that saves prepared under `mu` and run after it is released still land in mutation order, so `jobs.json` matches the in-memory list after concurrent create/disable operations. |
| `TestSetJobListViewPersistsToConfigFile` | Verifies the Jobs-list density preference reaches `gosentry.json`, so the chosen view reopens after a restart. |
| `TestSetJobListViewNormalizesUnknownValue` | Verifies anything but `"compact"` is stored as `"detailed"`, so the config never gains a value no reader understands. |
| `TestPrependLogCapsActivityList` | Verifies that the activity log never grows beyond its maximum cap. | | `TestPrependLogCapsActivityList` | Verifies that the activity log never grows beyond its maximum cap. |
--- ---
### src/app/run_test.go
**Package:** `app`
Tests overlap policy, sequential execution, run statistics, timeout resolution,
and scheduler edge cases using injected `runJob` and `primeDue`.
| Test | Purpose |
|------|---------|
| `TestUpdateStats` | Verifies aggregate duration math on `JobRuntime`. |
| `TestUpdateStatsSkipsZeroDuration` | Verifies zero-duration runs are excluded from averages. |
| `TestRunDueParallelStartsAllDueJobs` | Parallel mode: both due jobs enter the runner before either completes. |
| `TestRunDueSequentialSerializes` | Sequential mode: job 2 waits until job 1 finishes. |
| `TestRunDueSkipDropsOverlap` | Global skip: no second concurrent run, `PendingRuns` stays 0. |
| `TestRunDueQueueRerunsAfterFinish` | Queue: one deferred run after an in-flight finish; also covers an empty per-job policy inheriting the global default. |
| `TestRunDueQueueDrainsMultipleOverlaps` | Queue: multiple missed ticks drain as separate runs. |
| `TestRunDueQueueCapsPendingRuns` | Regression: `PendingRuns` stops growing at `maxPendingRuns` instead of accumulating without bound for a job that never keeps up with its schedule. |
| `TestRunDuePerJobQueueOverridesGlobalSkip` | Per-job `queue` beats global `skip`. |
| `TestRunDuePerJobSkipOverridesGlobalQueue` | Per-job `skip` beats global `queue`. |
| `TestRunNowSequentialGuard` | Manual run refused while another job runs in sequential mode. |
| `TestRunDueQueueDrainSkippedWhenPaused` | Queued overlaps are not drained while the scheduler is paused, and pausing clears the backlog rather than leaving it to fire a stale deferred run on resume. |
| `TestEffectiveTimeout` | Verifies the three-state resolution: `nil` inherits the global default, a positive value overrides it, and an explicit `0` means no timeout without inheriting. |
---
### src/app/events_test.go ### src/app/events_test.go
**Package:** `app` **Package:** `app`
@@ -143,7 +234,6 @@ Tests the event-emission and observer-subscription machinery.
| Test | Purpose | | Test | Purpose |
|------|---------| |------|---------|
| `TestEmitDeliversToAllObserversInOrder` | Verifies that all registered observers receive emitted events in registration order. | | `TestEmitDeliversToAllObserversInOrder` | Verifies that all registered observers receive emitted events in registration order. |
| `TestEmitWithNoObserversIsNoop` | Verifies that emitting an event with no observers does not panic. |
| `TestObserverCanReadServiceState` | Verifies that an observer called by `emit` can safely read Service state (jobs, runtimes). | | `TestObserverCanReadServiceState` | Verifies that an observer called by `emit` can safely read Service state (jobs, runtimes). |
--- ---
@@ -158,11 +248,15 @@ Tests display-formatting helpers used by the UI.
|------|---------| |------|---------|
| `TestStatusText` | Verifies that job status codes map to the correct display strings. | | `TestStatusText` | Verifies that job status codes map to the correct display strings. |
| `TestEventText` | Verifies trigger-type labels for scheduled, manual, and UI triggers. | | `TestEventText` | Verifies trigger-type labels for scheduled, manual, and UI triggers. |
| `TestDisplayFolder` | Verifies that an empty folder string shows "No folder". | | `TestEventLine` | Verifies the one-line activity rendering of a `RunRecord`, including the log basename and the `Unknown` fallback for a blank trigger. |
| `TestDisplayArguments` | Verifies that an empty arguments string shows "None". | | `TestDisplayFolder` | Verifies that an empty folder string shows "(No folder)". |
| `TestDisplayArguments` | Verifies that an empty arguments string shows "(none)". |
| `TestDisplayRunMode` | Verifies run-mode labels for normal and start-only modes. | | `TestDisplayRunMode` | Verifies run-mode labels for normal and start-only modes. |
| `TestDisplayInvocation` | Verifies that the full invocation display string combines command and arguments with spacing. | | `TestDisplayInvocation` | Verifies that the full invocation display string combines command and arguments with spacing. |
| `TestDisplayIndex` | Verifies that the display index is one-based (job slice index + 1). | | `TestDisplayIndex` | Verifies the list position of a job index in a filtered index slice. |
| `TestDisplayStats` | Verifies statistics line formatting for the details panel. |
| `TestDisplayOverlapPolicy` | Verifies per-job vs inherited global overlap policy labels. |
| `TestDisplayTimeout` | Verifies the three timeout states read differently in the details panel: `45 s`, `no timeout`, and `… (global default)`. |
--- ---
@@ -170,17 +264,26 @@ Tests display-formatting helpers used by the UI.
**Package:** `storage` **Package:** `storage`
Tests JSON round-tripping, YAML migration import, and default generation. Tests JSON round-tripping, default generation, and backward compatibility.
| Test | Purpose | | Test | Purpose |
|------|---------| |------|---------|
| `TestJobsRoundTrip` | Verifies that jobs saved to JSON are reloaded with identical field values. | | `TestJobsRoundTrip` | Verifies that jobs saved to JSON are reloaded with identical field values. |
| `TestConfigRoundTrip` | Verifies that settings saved to JSON are reloaded with identical field values. | | `TestConfigRoundTrip` | Verifies that settings saved to JSON are reloaded with identical field values. |
| `TestNormalizeJobsFillsDefaults` | Verifies that `normalizeJobs` assigns sequential IDs and sets default name, schedule, and command for jobs missing those fields. | | `TestNormalizeJobsFillsDefaults` | Verifies that `normalizeJobs` assigns sequential IDs and sets default name, schedule, and command for jobs missing those fields. |
| `TestLoadOrCreateConfigMigratesFromLegacy` | Verifies that when `gosentry.json` is absent but `gosentry.yaml` exists the config is imported from the legacy YAML file on first load. | | `TestNormalizeJobsReassignsDuplicateIDs` | Verifies that a hand-edited `jobs.json` with two entries sharing one ID gets the later duplicates reassigned instead of colliding on one runtime. |
| `TestLoadOrCreateJobsMigratesFromLegacy` | Verifies that when `jobs.json` is absent but `jobs.yaml` exists the jobs are imported from the legacy YAML file on first load. | | `TestResolveConfiguredPathCleansAbsolutePaths` | Verifies (Windows only) that forward-slash and backslash spellings of the same absolute path resolve to the same string. |
| `TestLoadOrCreateConfigCreatesDefaultsOnFirstRun` | Verifies that a missing config file is created with sane defaults and a sample job. | | `TestLoadOrCreateConfigCreatesDefaultsOnFirstRun` | Verifies that a missing config file is created with sane defaults. |
| `TestLoadOrCreateJobsSeedsSampleJobsOnFirstRun` | Verifies that a missing jobs file is created with the sample jobs from `defaultJobs`. |
| `TestLoadOrCreateConfigKeepsZeroTimeoutOnReload` | Verifies that `default_timeout_seconds: 0` survives a reload rather than being normalized away — 0 is a value, not a missing field. |
| `TestLoadOrCreateConfigPreservesZeroRetentionLimits` | Verifies that `max_log_files` / `max_log_age_days` of 0 read back as 0 ("keep everything") instead of being backfilled to the 100 / 30 defaults — a field the file sets is not the missing-field case. |
| `TestLoadOrCreateConfigMigratesJobsDir` | Verifies that a pre-0.15 `jobs_dir` becomes `jobs_file` pointing at the same `jobs.json`, and that the retired key is not written back. |
| `TestLoadOrCreateConfigMigratesLegacyThemeDefault` | Verifies that a config storing the retired `"default"` theme value is normalized to `system` on load. |
| `TestLoadJobsFileReportsMissingWithoutCreating` | Verifies that `LoadJobsFile` reports a missing file as not-found without creating or seeding it, and normalizes the jobs it does load. |
| `TestApplyConfigPathsDerivesJobsDir` | Verifies that the configured jobs file resolves against the program folder and that `Paths.JobsDir` is derived from it. |
| `TestJobTimeoutRoundTripsThreeStates` | Verifies the on-disk encoding that keeps "inherit" and "no timeout" distinguishable: `nil` is omitted entirely, an explicit `0` is written and read back as set. |
| `TestJobsJSONDoesNotPersistRuntimeNoise` | Verifies that `jobs.json` does not persist runtime state (LastRun, NextRun, etc.). Only durable job fields are stored. | | `TestJobsJSONDoesNotPersistRuntimeNoise` | Verifies that `jobs.json` does not persist runtime state (LastRun, NextRun, etc.). Only durable job fields are stored. |
| `TestWriteJSONReplacesFileAtomically` | Pins the durability fix: `writeJSON` replaces the destination through a temp file and a rename rather than truncating it in place, and leaves no temp file behind. |
--- ---
@@ -201,7 +304,7 @@ Tests the timing-loop contract using a fake clock.
**Package:** `runner` **Package:** `runner`
Tests command execution, exit code handling, output capture, and Windows-specific process behavior. Tests command execution, exit code handling, output capture, and the run timeout.
#### Log file tests #### Log file tests
@@ -234,21 +337,56 @@ Tests command execution, exit code handling, output capture, and Windows-specifi
|------|---------| |------|---------|
| `TestRunJobFailsOnNonZeroExitCode` | Verifies that a nonzero process exit code results in "Failed" status with an "exit code N" detail. | | `TestRunJobFailsOnNonZeroExitCode` | Verifies that a nonzero process exit code results in "Failed" status with an "exit code N" detail. |
#### Timeout
| Test | Purpose |
|------|---------|
| `TestRunJobTimesOut` | Verifies that a positive timeout kills a long-running command and reports `Timed out after <timeout>`. |
| `TestRunJobZeroTimeoutMeansNoTimeout` | Verifies that a non-positive duration runs without a deadline, bounded only by the caller's context. |
| `TestRunJobStartOnlyIgnoresTimeout` | Verifies that fire-and-forget jobs run on the untimed context, so the timeout never kills a process the runner is not waiting for. |
#### Start-only mode #### Start-only mode
| Test | Purpose | | Test | Purpose |
|------|---------| |------|---------|
| `TestRunJobStartOnlyDoesNotWaitForExitCode` | Verifies that `StartOnly: true` jobs launch and return "OK" immediately without waiting for the process to exit. | | `TestRunJobStartOnlyDoesNotWaitForExitCode` | Verifies that `StartOnly: true` jobs launch and return "OK" immediately without waiting for the process to exit. |
| `TestRunJobStartOnlyReportsStartFailure` | Verifies that `StartOnly: true` jobs still report "Failed" if the process cannot be started. | | `TestRunJobStartOnlyReportsStartFailure` | Verifies that `StartOnly: true` jobs still report "Failed" if the process cannot be started. |
| `TestRunJobStartOnlyLeavesNoContextWatcher` | Verifies that a start-only run leaves no `os/exec` context-watcher goroutine behind, since it never calls `Wait` and the started process is meant to outlive the app. |
#### Utility / Windows invocation ---
| Test | Platform | Purpose | ### src/runner/runner_windows_test.go
|------|----------|---------|
| `TestDirectCommandDoesNotHideWindow` | Windows | Verifies that direct executable commands do not request hidden-window startup. | **Location:** `src/runner/runner_windows_test.go`
| `TestShellCommandHidesWindow` | Windows | Verifies that shell commands request hidden-window startup to prevent console flash. | **Build Tags:** `//go:build windows`
| `TestShellCommandUsesWindowsSafeQuoting` | Windows | Verifies `cmd.exe /S /C` quoting for paths with spaces and special characters. |
| `TestWindowsShellCommandLineQuotesUnquotedProgramPath` | Windows | Verifies that unquoted program paths in shell commands are quoted while preserving already-quoted arguments. | Tests the Windows shell invocation and hidden-window flags.
| Test | Purpose |
|------|---------|
| `TestDirectCommandDoesNotHideWindow` | Verifies that direct executable commands do not request hidden-window startup. |
| `TestShellCommandHidesWindow` | Verifies that shell commands request hidden-window startup to prevent console flash. |
| `TestShellCommandUsesWindowsSafeQuoting` | Verifies `cmd.exe /S /C` quoting for paths with spaces and special characters. |
| `TestWindowsShellCommandLineQuotesUnquotedProgramPath` | Verifies that unquoted program paths in shell commands are quoted while preserving already-quoted arguments. |
| `TestQuoteLeadingWindowsProgramPathPicksEarliestBoundedExtension` | Regression: the program path ends at the *earliest* extension match sitting at a token boundary — not the first extension in `.exe`/`.cmd`/`.bat`/`.com` list order, and not a substring inside another word — so a `.bat` wrapper followed by an `.exe` argument still quotes only the wrapper. |
---
### src/runner/seed_test.go
**Package:** `runner`
Tests `SeedStats`, which rebuilds aggregate run statistics from the `.log` files
on disk at startup.
| Test | Purpose |
|------|---------|
| `TestSeedStatsBasic` | Verifies run/fail counts and the last, average, and maximum durations parsed from a job's log headers. |
| `TestSeedStatsDurationLessLegacyLog` | Verifies a log written before the `duration` header still counts as a run but is excluded from the duration aggregates, so a missing duration cannot masquerade as a 0 ms run. |
| `TestSeedStatsMaxFilesHonoured` | Verifies that only the newest `MaxLogFiles` logs are parsed when the limit is positive. |
| `TestSeedStatsMissingDir` | Verifies a missing logs directory yields an empty map rather than an error or a panic. |
| `TestSeedStatsUnknownJobProducesNoEntry` | Verifies log files that match no known job are ignored. |
| `TestSeedStatsMatchesByJobID` | Verifies logs are matched by the `job_id` header even when two job names sanitize to the same filename. |
--- ---
@@ -261,8 +399,7 @@ Tests log-file cleanup by age and by count.
| Test | Purpose | | Test | Purpose |
|------|---------| |------|---------|
| `TestCleanupLogsMissingDirReturnsNil` | Verifies that cleanup returns nil (not an error) when the logs directory does not exist. | | `TestCleanupLogsMissingDirReturnsNil` | Verifies that cleanup returns nil (not an error) when the logs directory does not exist. |
| `TestCleanupLogsRemovesFilesPastMaxAge` | Verifies that `.log` files older than `MaxLogAgeDays` are deleted. | | `TestCleanupLogsRemovesFilesPastMaxAge` | Verifies that `.log` files older than `MaxLogAgeDays` are deleted and files within the limit are retained. |
| `TestCleanupLogsKeepsFilesWithinAgeLimit` | Verifies that `.log` files within the age limit are retained. |
| `TestCleanupLogsByCountDeletesOldest` | Verifies that when file count exceeds `MaxLogFiles`, the oldest files are removed first. | | `TestCleanupLogsByCountDeletesOldest` | Verifies that when file count exceeds `MaxLogFiles`, the oldest files are removed first. |
| `TestCleanupLogsNonLogFilesNotDeleted` | Verifies that non-`.log` files in the logs directory are never deleted by cleanup. | | `TestCleanupLogsNonLogFilesNotDeleted` | Verifies that non-`.log` files in the logs directory are never deleted by cleanup. |
| `TestCleanupLogsSubdirsNotDeleted` | Verifies that subdirectories inside the logs directory are not deleted by cleanup. | | `TestCleanupLogsSubdirsNotDeleted` | Verifies that subdirectories inside the logs directory are not deleted by cleanup. |
@@ -270,6 +407,19 @@ Tests log-file cleanup by age and by count.
--- ---
### src/runner/logfile_test.go
**Package:** `runner`
Tests the disambiguating suffix `writeRunLog` applies when two runs land on
the same second.
| Test | Purpose |
|------|---------|
| `TestUniqueLogPathAvoidsCollision` | Verifies repeated calls for the same file name return distinct paths instead of silently overwriting an existing log. |
---
### src/platform/autostart/autostart_windows_test.go ### src/platform/autostart/autostart_windows_test.go
**Location:** `src/platform/autostart/autostart_windows_test.go` **Location:** `src/platform/autostart/autostart_windows_test.go`
@@ -279,14 +429,14 @@ Tests Windows autostart via shortcuts in the Startup folder.
| Test | Purpose | | Test | Purpose |
|------|---------| |------|---------|
| `TestParseRegistryRunValue` | Verifies that legacy `HKCU\...\Run` entry values are parsed correctly from `reg query` output (for migration/cleanup). | | `TestSameWindowsPathIgnoresCaseAndQuotes` | Verifies that Windows path comparison is case-insensitive, handles quote marks, and matches paths containing spaces. |
| `TestSameWindowsPathIgnoresCaseAndQuotes` | Verifies that Windows path comparison is case-insensitive and handles quote marks correctly. |
| `TestSameWindowsPathHandlesSpaces` | Verifies that Windows path comparison matches paths with and without surrounding quotes. |
| `TestSameWindowsPathStripsExtendedLengthPrefix` | Verifies that `\\?\`-prefixed paths are compared correctly after stripping the prefix. | | `TestSameWindowsPathStripsExtendedLengthPrefix` | Verifies that `\\?\`-prefixed paths are compared correctly after stripping the prefix. |
| `TestSameWindowsPathMatchesShortNameViaFilesystem` | Verifies that 8.3 short names are resolved to long names for comparison. | | `TestSameWindowsPathMatchesShortNameViaFilesystem` | Verifies that 8.3 short names are resolved to long names for comparison. |
| `TestStartupShortcutPathUsesUserStartupFolder` | Verifies that the shortcut path resolves into `%APPDATA%\Microsoft\Windows\Start Menu\Programs\Startup`. | | `TestStartupShortcutPathUsesUserStartupFolder` | Verifies that the shortcut path resolves into `%APPDATA%\Microsoft\Windows\Start Menu\Programs\Startup`. |
| `TestCreateStartupShortcutHandlesCyrillicPath` | Verifies that `.lnk` files are created correctly when the executable path contains Cyrillic characters. | | `TestCreateStartupShortcutHandlesCyrillicPath` | Verifies that `.lnk` files are created correctly when the executable path contains Cyrillic characters. |
| `TestCreateStartupShortcutHandlesSpaces` | Verifies that `.lnk` files are created with correct `TargetPath` and `--start-in-tray` arguments when the path contains spaces. | | `TestCreateStartupShortcutHandlesSpaces` | Verifies that `.lnk` files are created with correct `TargetPath` and `--start-in-tray` arguments when the path contains spaces. |
| `TestCreateStartupShortcutWithoutTrayFlag` | Verifies that autostart shortcuts omit `--start-in-tray` when the tray setting is off. |
| `TestAutostartStatusRequiresMatchingTrayFlag` | Verifies `AutostartStatus` reports a problem when the shortcut arguments do not match `KeepRunningInTray`. |
--- ---
@@ -300,7 +450,48 @@ Tests Linux autostart via XDG Desktop Entry files.
| Test | Purpose | | Test | Purpose |
|------|---------| |------|---------|
| `TestLinuxAutostartStartsInTray` | Verifies that the XDG Desktop Entry is created with `--start-in-tray` in the `Exec=` field. | | `TestLinuxAutostartStartsInTray` | Verifies that the XDG Desktop Entry is created with `--start-in-tray` in the `Exec=` field. |
| `TestLinuxAutostartRemovesLegacyDesktopEntry` | Verifies that enabling autostart also removes legacy PySentry service files left by earlier builds. | | `TestLinuxAutostartWithoutTrayFlag` | Verifies that the desktop entry omits `--start-in-tray` when the tray setting is off. |
---
### src/ui/tray_test.go
**Package:** `ui`
Tests startup helpers for tray and autostart interaction.
| Test | Purpose |
|------|---------|
| `TestResolveStartHiddenUsesDomainHelper` | Verifies the UI startup helper stays aligned with `domain.ResolveStartHidden`. |
---
### src/platform/desktop/desktop_linux_test.go
**Location:** `src/platform/desktop/desktop_linux_test.go`
**Build Tags:** `//go:build linux`
Tests Linux desktop integration (`.desktop` file and icon under XDG data home).
| Test | Purpose |
|------|---------|
| `TestInstallDesktopIntegrationWritesDesktopAndIcon` | Verifies `.desktop` and PNG icon files are written under `$XDG_DATA_HOME`. |
| `TestQuoteDesktopExecQuotesPath` | Verifies `Exec=` paths with spaces are shell-quoted. |
---
### src/platform/filemanager/filemanager_test.go
**Package:** `filemanager`
Tests the guards around opening a folder in the desktop file manager. The
success path is not tested: it would open a real file manager window.
| Test | Purpose |
|------|---------|
| `TestOpenRejectsMissingFolder` | Verifies that `Open` reports a missing directory (naming the path) instead of launching a handler. |
| `TestOpenRejectsFile` | Verifies that `Open` refuses a path that is a file rather than a directory. |
| `TestOpenCommandNamesPlatformHandler` | Verifies the per-platform handler (`explorer` / `xdg-open`, none elsewhere) and that the path is passed as one argument. |
--- ---
@@ -308,17 +499,143 @@ Tests Linux autostart via XDG Desktop Entry files.
**Package:** `ui` **Package:** `ui`
Tests pure helper functions in the jobs view (no Fyne widget construction). Tests the Jobs tab: pure filter helpers, and — through Fyne's headless
`test.NewApp()` — the geometry and redraw behaviour that only shows up once the
widgets are assembled.
| Test | Purpose | | Test | Purpose |
|------|---------| |------|---------|
| `TestFilterValue` | Verifies that `filterValue` returns the correct display string for the current folder filter. | | `TestFilterValue` | Verifies that `filterValue` returns the correct display string for the current folder filter. |
| `TestFolderOptionsAlwaysIncludesSentinels` | Verifies that the folder filter list always starts with "All" and "No folder" sentinel entries. | | `TestFolderOptionsAlwaysIncludesSentinels` | Verifies that the folder filter list always starts with "All" and "No folder" sentinel entries. |
| `TestFolderOptionsAppendsUniqueFolders` | Verifies that folder names from the job list are appended once each, in order, without duplicates. | | `TestFolderOptionsAppendsUniqueFolders` | Verifies that folder names from the job list are appended once each, in order, without duplicates. |
| `TestFilteredJobIndexesAll` | Verifies that the "All" filter returns indexes for every job. | | `TestFilteredJobIndexes` | Table: verifies the "All" filter returns every index, a named folder returns only its own jobs, "No folder" matches empty and blank folder fields, and an empty job list yields no indexes. |
| `TestFilteredJobIndexesByNamedFolder` | Verifies that filtering by a named folder returns only jobs in that folder. | | `TestNextJobListViewFlipsBothWays` | Verifies the density toggle alternates between detailed and compact from either starting value. |
| `TestFilteredJobIndexesNoFolder` | Verifies that the "No folder" filter returns only jobs with an empty folder field. | | `TestViewToggleTextNamesTheAction` | Verifies the toggle button is labelled with the action it performs, not the state it is in. |
| `TestFilteredJobIndexesEmptySlice` | Verifies that filtering an empty job slice returns an empty index list. | | `TestJobListViewToggleShrinksRowsAndPersists` | End-to-end: one tap shrinks the row height, relabels the button, and reaches the config; tapping back undoes all three. |
| `TestJobListViewCompactConfigOpensCompact` | Verifies the persisted density is honoured at build time, not only after a tap. |
| `TestJobsSidebarWidthIsItsContent` | Regression guard: nothing but the sidebar's own toolbar row imposes a width floor on it. |
| `TestJobsSplitOpensAtTheSidebarWidth` | Verifies the derived split offset opens the divider at the sidebar's own width at the default window size — enough that the toolbar is never born clipped, and no more. |
| `TestToolbarButtonRedrawsRowAndDetails` | Regression guard: with the duplicate refreshes removed from the handlers, `jobsView.refresh` alone must re-snapshot the jobs and repopulate the details pane. |
| `TestJobsViewSelectionSurvivesAJobsFileSwitch` | Regression guard: adopting a different jobs file replaces the whole list from the Service, and the refresh that follows must leave the details pane and the list highlight describing the same job — not redraw the pane from a row index that belonged to the previous list. |
| `TestDetailCaptionWidthCoversEveryCaption` | Verifies every caption `metadataRows` returns fits the measured caption column, which is what makes the single row list self-enforcing. |
---
### src/ui/jobs_view_state_test.go
**Package:** `ui`
Tests `jobsViewState`, the Jobs tab's model: the job/runtime snapshot, the
folder filter, and the ID-based selection. No Fyne app is built — the state
touches no widgets, so these run in milliseconds.
| Test | Purpose |
|------|---------|
| `TestJobsViewStateSelectsTheFirstJob` | Verifies the opening state selects the first row, so the details pane is never blank when there is something to show. |
| `TestJobsViewStateEmptyListSelectsNothing` | Verifies an empty job list leaves nothing selected and no row to highlight (`displayRow` = -1). |
| `TestJobsViewStateSelectionFollowsTheJobNotTheRow` | Regression guard: a job removed above the selected one (through the Service, the way an external change reaches the view) must not slide the selection onto its neighbour — the selection is a job ID, and only its row moves. |
| `TestJobsViewStateDropsSelectionWhenItsJobIsGone` | Verifies a selection whose job no longer exists falls back to the first visible row instead of describing whichever job inherited its position. |
| `TestJobsViewStateApplyFilter` | Verifies the folder filter keeps a selection it still shows, moves it to the folder's first row when it does not, and that "No folder" matches the job without one. |
| `TestJobsViewStateEmptyFilterSelectsNothing` | Verifies a filter matching no job is a filter choice, not an error state: nothing selected, nothing highlighted, and the selection returns when the filter is cleared. |
| `TestJobsViewStateHiddenSelectionIsNotHighlighted` | Verifies a selected job the filter hides reports no display row rather than falling back to row 0, which would highlight an unrelated job. |
| `TestJobsViewStateRuntimeIsNeverNil` | Verifies `runtime` returns an empty `JobRuntime` for a job the Service has none for, so callers need no nil check. |
| `TestJobsViewStateJobAtRejectsRowsOutsideTheFilter` | Verifies row lookups are bounded by the filtered rows, which is what the list widget draws from. |
---
### src/ui/history_view_test.go
**Package:** `ui`
Tests the History tab: the pure activity helpers and the sorted-snapshot and
column-width behaviour of the assembled table.
| Test | Purpose |
|------|---------|
| `TestHistoryCellText` | Verifies table cell text for all columns; empty trigger → `Unknown`. |
| `TestLogFileName` | Verifies log path basename extraction on Windows and Unix paths. |
| `TestNewEventUsesConsistentTimestampShape` | Verifies UI events use the same timestamp layout as run records. |
| `TestLastJobLogsCapsAndCopies` | Verifies activity panel cap and defensive copy semantics. |
| `TestLastJobLogsEmpty` | Verifies nil/empty log input returns an empty slice. |
| `TestIndexOfID` | Verifies job lookup by ID returns `-1` when not found. |
| `TestHistorySortToggleKeepsRowsInSync` | Regression guard for the cached sorted snapshot: the length callback and the cells must be refilled together, or the row count and the cell contents disagree. |
| `TestHistoryCellTemplateIsPlainText` | Verifies the cell template already carries the zero `TextStyle`, since the per-cell assignment that used to reset it is gone. |
| `TestTextColumnWidthClamps` | Covers the three shapes of `textColumnWidth`: below the minimum, in range, and capped at the maximum. |
| `TestHistoryColumnsFitTheirContent` | Verifies every column is at least as wide as its widest known or present value, at the default text size and at a scaled theme. |
| `TestHistoryLogCapsRecords` | Regression guard for the unbounded History list: the log keeps the newest `maxHistoryRows` records, drops the oldest from the front, and trims a list handed in already over the cap. |
| `TestHistoryLogWidthsMatchAFullScan` | Verifies the incremental column widths equal a full rescan while every measured record is still present — the cheaper path must not clip what the old one showed. |
| `TestHistoryLogWidthsDoNotShrinkWhenRecordsAgeOut` | Verifies a column keeps its width after the record that set it is dropped by the cap, since the rows on screen were laid out against it. |
| `TestHistoryLogRescansOnThemeChange` | Verifies a theme change falls back to a full rescan, the one case the incremental fold cannot handle because every stored width was measured at the old text size. |
---
### src/ui/settings_view_test.go
**Package:** `ui`
Tests the Settings tab helpers and the row layout.
| Test | Purpose |
|------|---------|
| `TestSettingsFolderPath` | Verifies the folder the Logs directory "Open" button targets: blank text yields no path, a relative path resolves against the application directory, an absolute path is used as typed. |
| `TestSettingsRowStretchesItsControl` | Verifies the row's centre slot already stretches the control to the column width — the property that made a fixed-width wrapper around it redundant. |
| `TestChooseFileAppliesFilter` | Verifies the deduplicated picker opens a dialog both with a nil filter (the command browser) and with a concrete one (`chooseJSONFile`). |
| `TestSettingsCaptionsCoverEveryRow` | Verifies every caption used in a row is present in `settingsCaptions` and fits the measured caption column. |
---
### src/ui/layout_test.go
**Package:** `ui`
Tests the theme-derived sizing helpers in `layout.go`.
| Test | Purpose |
|------|---------|
| `TestRowOverlapMatchesInnerPadding` | Pins `rowOverlap` to `-theme.InnerPadding()` under two themes, the property that lets it follow a theme instead of drifting from a hand-tuned literal. |
| `TestCancelRowOverlapAddsBackOneInnerPadding` | Verifies that `cancelRowOverlap` adds back exactly one inner padding on the top edge only, leaving width and the row below unaffected. |
| `TestCaptionColumnWidth` | Covers no captions, one, and several of varying length, at two text sizes. |
---
### src/ui/theme_test.go
**Package:** `ui`
Tests the branded theme and the stored theme choice.
| Test | Purpose |
|------|---------|
| `TestGoSentryThemeBrandColors` | Verifies the brand colors land on the semantically correct `ColorName`s in both the light and dark variants. |
| `TestGoSentryThemeDelegatesUnbrandedColors` | Verifies unbranded color names fall through to the base theme rather than rendering transparent. |
| `TestThemeForChoice` | Verifies the GoSentry choice and the empty legacy value yield the branded primary; only the explicit system choice yields Fyne's built-in theme. |
| `TestThemeLabelRoundTrip` | Verifies the dropdown labels round-trip and that the empty value maps to the GoSentry label rather than a blank option. |
---
### src/ui/mainwindow_test.go
**Package:** `ui`
Tests main view construction with an injected `*app.Service`.
| Test | Purpose |
|------|---------|
| `TestMainViewFitsTheDefaultWindowSize` | Verifies the assembled content's minimum fits the window size the app asks for, so Fyne never silently widens the window past it. The store's config path is deliberately long, since it was the path label that used to grow the Settings tab. |
| `TestMainViewRecordStartupAddsHistoryRow` | Verifies the `recordStartup` closure `newMainView` returns appends the startup receipt to History and redraws the table, with the windowed and tray wordings `run.go` selects between. |
---
### src/ui/notify_timing_test.go
**Package:** `ui`
Tests the failure-notification timing diagnostics added in 1.0.2.
| Test | Purpose |
|------|---------|
| `TestNotificationTimingFormatLine` | Verifies `notificationTiming.formatLine` renders the job name and the three millisecond deltas (`ms_after_run`, `ms_fyne_do`, `ms_send`) plus their sum (`ms_app_total`). |
| `TestAppendNotificationTimingLogWritesHeaderAndRow` | Verifies `appendNotificationTimingLog` creates `notify-timing.tsv` with its header on first write and appends a row containing the job name. |
--- ---
@@ -336,9 +653,47 @@ Tests pure helper functions in the jobs view (no Fyne widget construction).
6. **Start-Only Mode** — Special handling for long-running processes that should be launched but not waited on, tested separately from normal execution flow. 6. **Start-Only Mode** — Special handling for long-running processes that should be launched but not waited on, tested separately from normal execution flow.
7. **Regression on serious fixes** — Any fix from an internal review with severity ≥ medium gets a targeted regression test (see `run_test.go` for examples).
8. **Geometry is measured, not eyeballed** — The `ui` tests that build widgets under `test.NewApp()` assert sizes and offsets, and several re-run under a scaled theme. That is what keeps [STANDARDS.md](STANDARDS.md)'s "measure at build time, never a pixel constant" rule enforceable rather than aspirational.
9. **Redundancy is measured, not read** — Before deleting a test as a duplicate, run both in isolation with `-coverprofile` and compare the profiles. Identical coverage alone is *not* grounds for deletion: several kept tests hit the same statements while asserting genuinely different properties (see the table below). Deletion requires identical coverage **and** assertions that are a subset of the survivor's.
---
## Look-alike tests that are kept
Every pair here has an identical coverage profile, so a redundancy pass will
flag them again. They were measured under principle 9 and kept because the
assertions differ — not because nobody looked.
| Tests | Why both stay |
|-------|---------------|
| `TestSetGlobalPausePersistsToConfigFile` / `TestSetGlobalPauseUpdatesRuntimesAndEmits` | The first asserts the flag reaches `gosentry.json`, which is what makes the pause survive a restart; the second asserts the in-memory runtimes and the emitted event. |
| `TestRunDueQueueDrainsMultipleOverlaps` / `TestRunDueQueueRerunsAfterFinish` | The first drains three queued occurrences rather than one, so it is the test that would catch a drain loop that fires only once. |
| `TestCreateStartupShortcutHandlesCyrillicPath` / `TestCreateStartupShortcutHandlesSpaces` | Non-ASCII paths and paths with spaces are different real-world failure modes for the WScript.Shell COM call. |
| `TestRunJobLogFileAllHeaders` / `TestRunJobRecordFields` / `TestRunJobWritesLogFile` | Three different subjects: the log file's headers, the returned `RunRecord`'s fields, and the log file's name and directory. The fixtures differ too — only `TestRunJobWritesLogFile` runs the `Manual` trigger. Merging them into one `RunJob` call was measured and declined: it saves ~90 ms (the three cost 0.14 s combined; the `runner` package's seconds are `TestRunJobTimesOut` and `TestRunJobZeroTimeoutMeansNoTimeout`, which wait on purpose) and would drop the `Manual` path from the header assertions. |
--- ---
## Remaining Test Coverage Gaps ## Remaining Test Coverage Gaps
- GUI integration tests — Fyne widget interaction is not yet tested end-to-end - Full GUI E2E — tab navigation, dialog flows, and native file pickers are not exercised end-to-end; the `ui` tests assemble views and measure them, but nothing drives a real window.
- Job history on-disk retrieval — RunRecord file reading is not covered - History is session-only by design — `.log` files seed aggregate stats only, not the History table (see [STANDARDS.md](STANDARDS.md))
- Fyne's headless driver cannot report a maximized window, which is why window-size persistence stays frozen in [ROADMAP.md](ROADMAP.md)
### Functions deliberately at 0%
A coverage run over the non-UI packages reports these as uncovered. All are
intentional; none is an oversight to be "fixed" with a test.
- The real `Clock` — a fake is injected everywhere it is used.
- `storage.OpenStore`, `storage.ResolvePaths`, `storage.PeekKeepRunningInTray`, `app.Service.Start`, `app.Open` — process entry points, exercised by running the app.
- The autostart and desktop-icon wrappers (`app.Service.InstallDesktopIcon`, `AutostartStatus`, `ApplyAutostart`) — OS integration, driven only on a real desktop.
- `app.Service.ShouldNotifyOnFailure` — a getter under the mutex.
- `app.Service.Config` and `app.Service.Paths` — read only from `src/ui`, which
this run excludes, so they are covered by the suite but not by this profile.
The same applies to `storage.Store.SaveJobs`: the engine writes through
`PrepareSaveJobs`, and the one-shot wrapper is what `OpenStore` uses.
- The five `isEvent` marker methods in `app/events.go` — empty bodies that exist
only to close the `Event` interface.
docs/screenshots/screenshot_history.PNG
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 37 KiB

docs/screenshots/screenshot_jobs.PNG
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 99 KiB

docs/screenshots/screenshot_settings.PNG
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 100 KiB

go.mod
-1
View File
@@ -5,7 +5,6 @@ go 1.22
require ( require (
fyne.io/fyne/v2 v2.7.4 fyne.io/fyne/v2 v2.7.4
github.com/robfig/cron/v3 v3.0.1 github.com/robfig/cron/v3 v3.0.1
go.yaml.in/yaml/v4 v4.0.0-rc.5
) )
require ( require (
go.sum
-2
View File
@@ -71,8 +71,6 @@ github.com/stretchr/testify v1.11.1 h1:7s2iGBzp5EwR7/aIZr8ao5+dra3wiQyKjjFuvgVKu
github.com/stretchr/testify v1.11.1/go.mod h1:wZwfW3scLgRK+23gO65QZefKpKQRnfz6sD981Nm4B6U= github.com/stretchr/testify v1.11.1/go.mod h1:wZwfW3scLgRK+23gO65QZefKpKQRnfz6sD981Nm4B6U=
github.com/yuin/goldmark v1.7.8 h1:iERMLn0/QJeHFhxSt3p6PeN9mGnvIKSpG9YYorDMnic= github.com/yuin/goldmark v1.7.8 h1:iERMLn0/QJeHFhxSt3p6PeN9mGnvIKSpG9YYorDMnic=
github.com/yuin/goldmark v1.7.8/go.mod h1:uzxRWxtg69N339t3louHJ7+O03ezfj6PlliRlaOzY1E= github.com/yuin/goldmark v1.7.8/go.mod h1:uzxRWxtg69N339t3louHJ7+O03ezfj6PlliRlaOzY1E=
go.yaml.in/yaml/v4 v4.0.0-rc.5 h1:JVliQq9EGOYaTgMi+k8BhUJyqcGk4ZqeuiN1Cirba9c=
go.yaml.in/yaml/v4 v4.0.0-rc.5/go.mod h1:aZqd9kCMsGL7AuUv/m/PvWLdg5sjJsZ4oHDEnfPPfY0=
golang.org/x/image v0.24.0 h1:AN7zRgVsbvmTfNyqIbbOraYL8mSwcKncEj8ofjgzcMQ= golang.org/x/image v0.24.0 h1:AN7zRgVsbvmTfNyqIbbOraYL8mSwcKncEj8ofjgzcMQ=
golang.org/x/image v0.24.0/go.mod h1:4b/ITuLfqYq1hqZcjofwctIhi7sZh2WaCjvsBNjjya8= golang.org/x/image v0.24.0/go.mod h1:4b/ITuLfqYq1hqZcjofwctIhi7sZh2WaCjvsBNjjya8=
golang.org/x/net v0.35.0 h1:T5GQRQb2y08kTAByq9L4/bz8cipCdA8FbRTXewonqY8= golang.org/x/net v0.35.0 h1:T5GQRQb2y08kTAByq9L4/bz8cipCdA8FbRTXewonqY8=
scripts/build-linux-docker.sh
+2
View File
@@ -18,12 +18,14 @@ fi
docker build -f Dockerfile -t "$tag" . docker build -f Dockerfile -t "$tag" .
mkdir -p "$(dirname "$output")" mkdir -p "$(dirname "$output")"
mkdir -p "$(pwd)/.gocache"
docker run --rm \ docker run --rm \
"${docker_user_args[@]}" \ "${docker_user_args[@]}" \
-e "VERSION=${version}" \ -e "VERSION=${version}" \
-e "OUTPUT=${output}" \ -e "OUTPUT=${output}" \
-e "GOCACHE=/tmp/go-build-cache" \ -e "GOCACHE=/tmp/go-build-cache" \
-v "$(pwd):/src" \ -v "$(pwd):/src" \
-v "$(pwd)/.gocache:/tmp/go-build-cache" \
-w /src \ -w /src \
"$tag" \ "$tag" \
bash -c 'CGO_ENABLED=1 GOOS=linux GOARCH=amd64 go build -buildvcs=false -trimpath -ldflags "-s -w -X gitea.mixdep.ru/mix/gosentry/src/app.Version=${VERSION}" -o "${OUTPUT}" ./cmd/gosentry' bash -c 'CGO_ENABLED=1 GOOS=linux GOARCH=amd64 go build -buildvcs=false -trimpath -ldflags "-s -w -X gitea.mixdep.ru/mix/gosentry/src/app.Version=${VERSION}" -o "${OUTPUT}" ./cmd/gosentry'
scripts/build-release-linux.sh
+2
View File
@@ -88,11 +88,13 @@ normalize_targets() {
} }
run_in_builder() { run_in_builder() {
mkdir -p "${repo_root}/.gocache"
docker run --rm \ docker run --rm \
"${docker_user_args[@]}" \ "${docker_user_args[@]}" \
-e "VERSION=${version}" \ -e "VERSION=${version}" \
-e "GOCACHE=/tmp/go-build-cache" \ -e "GOCACHE=/tmp/go-build-cache" \
-v "${repo_root}:/src" \ -v "${repo_root}:/src" \
-v "${repo_root}/.gocache:/tmp/go-build-cache" \
-w /src \ -w /src \
"$tag" \ "$tag" \
bash -c "$1" bash -c "$1"
scripts/build-windows.bat
+18 -3
View File
@@ -6,21 +6,28 @@ REM directory. Move to the repository root (the parent of scripts\) before using
REM relative paths such as .\cmd\gosentry and packaging\windows\gosentry.rc. REM relative paths such as .\cmd\gosentry and packaging\windows\gosentry.rc.
cd /d "%~dp0\.." cd /d "%~dp0\.."
echo [GoSentry Windows Build]
echo.
for /f "tokens=4" %%V in ('findstr /C:"var Version" src\app\version.go') do set "VERSION=%%~V" for /f "tokens=4" %%V in ('findstr /C:"var Version" src\app\version.go') do set "VERSION=%%~V"
if "%VERSION%"=="" set "VERSION=0.0.0-dev" if "%VERSION%"=="" set "VERSION=0.0.0-dev"
set "VERSION=%VERSION:"=%" set "VERSION=%VERSION:"=%"
echo Version: %VERSION%
REM Optional first argument allows CI or a developer to choose another output REM Optional first argument allows CI or a developer to choose another output
REM path. The default keeps all generated binaries under dist\ so the source tree REM path. The default keeps all generated binaries under dist\ so the source tree
REM stays clean and the old bin\ folder is no longer needed. REM stays clean and the old bin\ folder is no longer needed.
set "OUTPUT=%~1" set "OUTPUT=%~1"
if "%OUTPUT%"=="" set "OUTPUT=dist\windows\gosentry-%VERSION%-windows-amd64.exe" if "%OUTPUT%"=="" set "OUTPUT=dist\windows\gosentry-%VERSION%-windows-amd64.exe"
echo Output: %OUTPUT%
echo.
REM Prefer the standard Go installer path on Windows, but fall back to PATH for REM Prefer the standard Go installer path on Windows, but fall back to PATH for
REM machines where Go was installed by another package manager. REM machines where Go was installed by another package manager.
set "GOEXE=%ProgramFiles%\Go\bin\go.exe" set "GOEXE=%ProgramFiles%\Go\bin\go.exe"
if not exist "%GOEXE%" set "GOEXE=go" if not exist "%GOEXE%" set "GOEXE=go"
echo Setting up build environment...
REM Fyne uses native libraries through CGO. MSYS2 UCRT64 provides the GCC toolchain REM Fyne uses native libraries through CGO. MSYS2 UCRT64 provides the GCC toolchain
REM expected by the Windows build; prepending it keeps the script self-contained REM expected by the Windows build; prepending it keeps the script self-contained
REM without permanently changing the user's system PATH. REM without permanently changing the user's system PATH.
@@ -41,15 +48,23 @@ REM shortcuts, and the taskbar can show the GoSentry icon. The Go embed package
REM handles Fyne's runtime icon, but Explorer reads this Windows resource instead. REM handles Fyne's runtime icon, but Explorer reads this Windows resource instead.
where windres.exe >nul 2>nul where windres.exe >nul 2>nul
if %ERRORLEVEL%==0 ( if %ERRORLEVEL%==0 (
echo Embedding Windows icon resource...
windres.exe -O coff -o cmd\gosentry\rsrc_windows_amd64.syso packaging\windows\gosentry.rc windres.exe -O coff -o cmd\gosentry\rsrc_windows_amd64.syso packaging\windows\gosentry.rc
) else (
echo Warning: windres not found; Windows icon resource will not be embedded.
) )
REM -trimpath removes local machine paths from the binary, -s -w reduce binary REM -trimpath removes local machine paths from the binary, -s -w reduce binary
REM size, and -H=windowsgui prevents a separate console window from opening when REM size, and -H=windowsgui prevents a separate console window from opening when
REM the GUI app starts from Explorer or a shortcut. REM the GUI app starts from Explorer or a shortcut.
echo Compiling Go binary...
"%GOEXE%" build -trimpath -ldflags "-s -w -H=windowsgui -X gitea.mixdep.ru/mix/gosentry/src/app.Version=%VERSION%" -o "%OUTPUT%" .\cmd\gosentry "%GOEXE%" build -trimpath -ldflags "-s -w -H=windowsgui -X gitea.mixdep.ru/mix/gosentry/src/app.Version=%VERSION%" -o "%OUTPUT%" .\cmd\gosentry
if errorlevel 1 exit /b 1 if errorlevel 1 (
echo Build failed with error code %ERRORLEVEL%
exit /b 1
)
REM Icons are embedded into the executable, so no assets directory is copied next REM Icons are embedded into the executable, so no assets directory is copied next
REM to the binary. Runtime YAML and log files are created by the app itself. REM to the binary. Runtime JSON and log files are created by the app itself.
echo Built %OUTPUT% echo.
echo Successfully built: %OUTPUT%
scripts/ci-build-release.sh
Executable
+100
View File
@@ -0,0 +1,100 @@
#!/usr/bin/env bash
set -euo pipefail
# Build and package every release artifact on a Linux host that already has the
# cross toolchain installed (native gcc + X11/OpenGL headers, the aarch64 cross
# compiler, and the MinGW-w64 toolchain for the Windows GUI binary). This is the
# non-Docker counterpart to scripts/build-release-linux.sh: the CI workflows in
# .github/ and .forgejo/ install those packages directly on the runner and then
# call this script, so the exact build/package commands live in one place and do
# not drift between the two forges.
#
# The build flags mirror the other scripts intentionally: -trimpath strips local
# paths, -s -w drops symbol/debug tables to shrink the binaries, -H=windowsgui
# suppresses the console window on Windows, and -X injects the version so the
# GUI and artifact names agree.
script_dir="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
repo_root="$(cd "${script_dir}/.." && pwd)"
cd "$repo_root"
# VERSION can be provided by CI (for a tagged release the workflow passes the tag
# without its leading "v"). Fall back to the source of truth in version.go so the
# script also works for a plain local invocation.
version="${VERSION:-$(sed -n 's/^var Version = "\(.*\)"/\1/p' src/app/version.go | tr -d '\r')}"
version="${version:-0.0.0-dev}"
ldflags="-s -w -X gitea.mixdep.ru/mix/gosentry/src/app.Version=${version}"
echo "Building GoSentry ${version} release artifacts"
mkdir -p dist/linux dist/windows
# --- Linux amd64 -----------------------------------------------------------
echo "==> linux/amd64"
CGO_ENABLED=1 GOOS=linux GOARCH=amd64 \
go build -buildvcs=false -trimpath -ldflags "$ldflags" \
-o "dist/linux/gosentry-${version}-linux-amd64" ./cmd/gosentry
# --- Linux arm64 (cross compiled) ------------------------------------------
echo "==> linux/arm64"
CC=aarch64-linux-gnu-gcc \
CGO_ENABLED=1 GOOS=linux GOARCH=arm64 \
CGO_CFLAGS="--sysroot=/ -I/usr/include/aarch64-linux-gnu" \
CGO_LDFLAGS="--sysroot=/ -L/usr/lib/aarch64-linux-gnu" \
PKG_CONFIG_LIBDIR=/usr/lib/aarch64-linux-gnu/pkgconfig \
go build -buildvcs=false -trimpath -ldflags "$ldflags" \
-o "dist/linux/gosentry-${version}-linux-arm64" ./cmd/gosentry
# --- Windows amd64 (cross compiled with MinGW) -----------------------------
echo "==> windows/amd64"
# windres embeds the .ico into the PE resource so Explorer/taskbar show the icon.
# The .syso is suffixed windows_amd64, so Go only links it into the Windows build
# and ignores it for the Linux targets above.
x86_64-w64-mingw32-windres -O coff \
-o cmd/gosentry/rsrc_windows_amd64.syso packaging/windows/gosentry.rc
CC=x86_64-w64-mingw32-gcc \
CGO_ENABLED=1 GOOS=windows GOARCH=amd64 \
go build -buildvcs=false -trimpath -ldflags "-H=windowsgui ${ldflags}" \
-o "dist/windows/gosentry-${version}-windows-amd64.exe" ./cmd/gosentry
# --- Package ---------------------------------------------------------------
# Each archive holds the executable plus the top-level README and CHANGELOG,
# flattened to the archive root so a user can extract straight into any folder.
# This matches the layout produced by package-linux.sh / package-windows.bat.
package_linux() {
local arch="$1"
local binary="dist/linux/gosentry-${version}-linux-${arch}"
local tarball="dist/linux/gosentry-${version}-linux-${arch}.tar.gz"
local staging="dist/linux/_staging-${arch}"
rm -rf "$staging"
mkdir -p "$staging"
cp "$binary" "$staging/gosentry"
cp README.md "$staging/README.md"
cp docs/CHANGELOG.md "$staging/CHANGELOG.md"
tar -czf "$tarball" -C "$staging" .
rm -rf "$staging"
echo "Packaged $tarball"
}
package_windows() {
local binary="dist/windows/gosentry-${version}-windows-amd64.exe"
local zipfile="gosentry-${version}-windows-amd64.zip"
local staging="dist/windows/_staging-amd64"
rm -rf "$staging"
mkdir -p "$staging"
cp "$binary" "$staging/gosentry.exe"
cp README.md "$staging/README.md"
cp docs/CHANGELOG.md "$staging/CHANGELOG.md"
# -j flattens: files land at the zip root with no staging path prefix.
( cd "$staging" && zip -j -q "../${zipfile}" ./* )
rm -rf "$staging"
echo "Packaged dist/windows/${zipfile}"
}
package_linux amd64
package_linux arm64
package_windows
echo "Release artifacts:"
find dist/linux dist/windows -maxdepth 1 -type f \( -name '*.tar.gz' -o -name '*.zip' \) -print
scripts/measure-windows-toast.ps1
+39
View File
@@ -0,0 +1,39 @@
# Measures the latency of Fyne's Windows toast path: write a short PowerShell
# script to %TEMP% and run it via PowerShell -ExecutionPolicy Bypass, the same
# approach fyne.io/fyne/v2/app uses in app_windows.go SendNotification.
param(
[int]$Iterations = 3
)
$template = @'
$title = "GoSentry timing test"
$content = "benchmark"
$iconPath = "file:///"
[Windows.UI.Notifications.ToastNotificationManager, Windows.UI.Notifications, ContentType = WindowsRuntime] > $null
$template = [Windows.UI.Notifications.ToastNotificationManager]::GetTemplateContent([Windows.UI.Notifications.ToastTemplateType]::ToastImageAndText02)
$toastXml = [xml] $template.GetXml()
$toastXml.GetElementsByTagName("text")[0].AppendChild($toastXml.CreateTextNode($title)) > $null
$toastXml.GetElementsByTagName("text")[1].AppendChild($toastXml.CreateTextNode($content)) > $null
$toastXml.GetElementsByTagName("image")[0].SetAttribute("src", $iconPath) > $null
$xml = New-Object Windows.Data.Xml.Dom.XmlDocument
$xml.LoadXml($toastXml.OuterXml)
$toast = [Windows.UI.Notifications.ToastNotification]::new($xml)
[Windows.UI.Notifications.ToastNotificationManager]::CreateToastNotifier("ru.mixeme.gosentry.desktop").Show($toast);
'@
Write-Host "Fyne-style Windows toast latency ($Iterations run(s), no icon path):"
$totalMs = 0
for ($i = 1; $i -le $Iterations; $i++) {
$scriptPath = Join-Path $env:TEMP ("fyne-timing-test-$i.ps1")
Set-Content -Path $scriptPath -Value $template -Encoding UTF8
$sw = [System.Diagnostics.Stopwatch]::StartNew()
$launch = "(Get-Content -Encoding UTF8 -Path `"$scriptPath`" -Raw) | Invoke-Expression"
& PowerShell -ExecutionPolicy Bypass -Command $launch | Out-Null
$sw.Stop()
$ms = [int]$sw.ElapsedMilliseconds
$totalMs += $ms
Write-Host (" run {0}: {1} ms" -f $i, $ms)
Remove-Item $scriptPath -ErrorAction SilentlyContinue
}
$avg = [math]::Round($totalMs / [double]$Iterations)
Write-Host (" average: {0} ms" -f $avg)
scripts/package-linux.sh
+54
View File
@@ -0,0 +1,54 @@
#!/usr/bin/env bash
set -euo pipefail
# Move to the repository root regardless of where the script is invoked from.
cd "$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)/.."
version="$(sed -n 's/^var Version = "\(.*\)"/\1/p' src/app/version.go | tr -d '\r')"
version="${version:-0.0.0-dev}"
package_arch() {
local arch="$1"
local binary="dist/linux/gosentry-${version}-linux-${arch}"
local tarball="dist/linux/gosentry-${version}-linux-${arch}.tar.gz"
local staging="dist/linux/_staging-${arch}"
mkdir -p dist/linux
if [ "$arch" = "arm64" ]; then
if ! command -v aarch64-linux-gnu-gcc >/dev/null 2>&1; then
echo "Skipping linux/arm64: aarch64-linux-gnu-gcc not found."
return 0
fi
echo "Building linux/arm64..."
CC=aarch64-linux-gnu-gcc \
CGO_ENABLED=1 GOOS=linux GOARCH=arm64 \
CGO_CFLAGS="--sysroot=/ -I/usr/include/aarch64-linux-gnu" \
CGO_LDFLAGS="--sysroot=/ -L/usr/lib/aarch64-linux-gnu" \
PKG_CONFIG_LIBDIR=/usr/lib/aarch64-linux-gnu/pkgconfig \
go build -trimpath \
-ldflags "-s -w -X gitea.mixdep.ru/mix/gosentry/src/app.Version=${version}" \
-o "$binary" ./cmd/gosentry
else
echo "Building linux/amd64..."
CGO_ENABLED=1 GOOS=linux GOARCH=amd64 \
go build -trimpath \
-ldflags "-s -w -X gitea.mixdep.ru/mix/gosentry/src/app.Version=${version}" \
-o "$binary" ./cmd/gosentry
fi
rm -rf "$staging"
mkdir -p "$staging"
cp "$binary" "$staging/gosentry"
cp README.md "$staging/README.md"
cp docs/CHANGELOG.md "$staging/CHANGELOG.md"
# -C "$staging" . puts all files at the archive root with no subdirectory.
tar -czf "$tarball" -C "$staging" .
rm -rf "$staging"
echo "Packaged $tarball"
}
package_arch amd64
package_arch arm64
scripts/package-windows.bat
+41
View File
@@ -0,0 +1,41 @@
@echo off
setlocal enabledelayedexpansion
REM Double-clicking a .bat file can start it with an arbitrary working directory.
REM Move to the repository root before using relative paths.
cd /d "%~dp0\.."
for /f "tokens=4" %%V in ('findstr /C:"var Version" src\app\version.go') do set "VERSION=%%~V"
if "%VERSION%"=="" set "VERSION=0.0.0-dev"
set "VERSION=%VERSION:"=%"
set "ARCH=windows-amd64"
set "EXE_PATH=dist\windows\gosentry-%VERSION%-%ARCH%.exe"
set "ZIP_PATH=dist\windows\gosentry-%VERSION%-%ARCH%.zip"
set "STAGING=dist\windows\_staging-%VERSION%-%ARCH%"
REM Build the Windows executable via the shared build script.
call scripts\build-windows.bat "%EXE_PATH%"
if errorlevel 1 exit /b 1
REM Assemble portable bundle in a staging directory.
if exist "%STAGING%" rmdir /s /q "%STAGING%"
mkdir "%STAGING%"
copy "%EXE_PATH%" "%STAGING%\gosentry.exe" >nul
copy README.md "%STAGING%\README.md" >nul
copy docs\CHANGELOG.md "%STAGING%\CHANGELOG.md" >nul
REM Remove any previous zip so Compress-Archive does not append to it.
if exist "%ZIP_PATH%" del /f "%ZIP_PATH%"
REM Compress the staging contents. Each file lands at the root of the zip so
REM the user can extract directly into any folder and run gosentry.exe.
powershell -NoProfile -Command "Compress-Archive -Path '%STAGING%\*' -DestinationPath '%ZIP_PATH%'"
if errorlevel 1 (
echo Compress-Archive failed. Ensure PowerShell 5+ is available.
exit /b 1
)
rmdir /s /q "%STAGING%"
echo Packaged %ZIP_PATH%
scripts/test.bat
+7
View File
@@ -6,6 +6,13 @@ REM Runs go vet and go test with race detection
REM Move to repository root REM Move to repository root
cd /d "%~dp0\.." cd /d "%~dp0\.."
REM This file is UTF-8 (the ✓/✗ below). cmd.exe reads batch files in the
REM console's active code page, which defaults to the system locale (e.g.
REM CP866 on Russian Windows) rather than UTF-8, so without this the two
REM symbols render as mojibake. Switching the console to UTF-8 first fixes
REM that; >nul silences chcp's own "Active code page" confirmation line.
chcp 65001 >nul
REM Fyne uses native libraries through CGO. MSYS2 UCRT64 provides the GCC toolchain REM Fyne uses native libraries through CGO. MSYS2 UCRT64 provides the GCC toolchain
REM expected by the Windows build; prepending it keeps the script self-contained REM expected by the Windows build; prepending it keeps the script self-contained
REM without permanently changing the user's system PATH. REM without permanently changing the user's system PATH.
src/app/events.go
+18 -3
View File
@@ -4,9 +4,12 @@ import "gitea.mixdep.ru/mix/gosentry/src/domain"
// Event is something the Service did to its state that observers may want to // Event is something the Service did to its state that observers may want to
// react to. It is a sealed interface: the concrete types in this file are the // react to. It is a sealed interface: the concrete types in this file are the
// only implementations (enforced by the unexported isEvent marker), so a UI // only implementations (enforced by the unexported isEvent marker), so an
// listener can exhaustively type-switch over them and the compiler will flag a // Event handed to an Observer is always one of the types declared here — a
// new event type that a switch forgot to handle. // caller outside this package cannot manufacture a new one. Go's type switch
// has no exhaustiveness check, so sealing buys that guarantee, not a
// compile-time warning when a new event type is added and a listener forgets
// to handle it; the listener still has to be updated by hand.
// //
// Events replace the old single onChange callback. Instead of the scheduler // Events replace the old single onChange callback. Instead of the scheduler
// reaching into the GUI, the Service emits typed events and the UI subscribes — // reaching into the GUI, the Service emits typed events and the UI subscribes —
@@ -41,6 +44,17 @@ type SchedulerStateChanged struct {
Paused bool Paused bool
} }
// JobsLoaded signals that the whole job list was replaced by the contents of a
// jobs file the user selected in Settings. It carries the path and job count
// because that is what the user needs to see confirmed — the switch happens
// without a prompt, and the previous list is no longer on screen to compare
// against. Observers that render jobs should re-read them through the Service;
// a broad JobChanged is emitted alongside for exactly that.
type JobsLoaded struct {
Path string
Count int
}
// ErrorOccurred signals a background error that could not be returned to a // ErrorOccurred signals a background error that could not be returned to a
// caller — typically a failed save or cleanup after an async run. The UI // caller — typically a failed save or cleanup after an async run. The UI
// surfaces it in the History tab so the user is not silently left with // surfaces it in the History tab so the user is not silently left with
@@ -50,6 +64,7 @@ type ErrorOccurred struct {
} }
func (JobChanged) isEvent() {} func (JobChanged) isEvent() {}
func (JobsLoaded) isEvent() {}
func (RunRecorded) isEvent() {} func (RunRecorded) isEvent() {}
func (SchedulerStateChanged) isEvent() {} func (SchedulerStateChanged) isEvent() {}
func (ErrorOccurred) isEvent() {} func (ErrorOccurred) isEvent() {}
src/app/events_test.go
-6
View File
@@ -33,12 +33,6 @@ func TestEmitDeliversToAllObserversInOrder(t *testing.T) {
} }
} }
func TestEmitWithNoObserversIsNoop(t *testing.T) {
svc := newTestService(nil)
// Must not panic with an empty observer list.
svc.emit(JobChanged{})
}
// Observers may read Service state from within OnEvent without deadlocking, // Observers may read Service state from within OnEvent without deadlocking,
// because emit is called outside the state lock. // because emit is called outside the state lock.
func TestObserverCanReadServiceState(t *testing.T) { func TestObserverCanReadServiceState(t *testing.T) {
src/app/format.go
+67
View File
@@ -2,6 +2,7 @@ package app
import ( import (
"fmt" "fmt"
"path/filepath"
"strings" "strings"
"gitea.mixdep.ru/mix/gosentry/src/domain" "gitea.mixdep.ru/mix/gosentry/src/domain"
@@ -32,6 +33,19 @@ func EventText(e domain.RunRecord) string {
return fmt.Sprintf("%s %s %s %s %s", e.Time, trigger, e.JobName, e.State, e.Detail) return fmt.Sprintf("%s %s %s %s %s", e.Time, trigger, e.JobName, e.State, e.Detail)
} }
// EventLine formats a run record as a compact single line for the jobs log
// view, using only the base name of the log file instead of the full path.
func EventLine(e domain.RunRecord) string {
trigger := e.Trigger
if trigger == "" {
trigger = "Unknown"
}
if e.LogFile != "" {
return fmt.Sprintf("%s %s %s %s %s %s", e.Time, trigger, e.JobName, e.State, e.Detail, filepath.Base(e.LogFile))
}
return fmt.Sprintf("%s %s %s %s %s", e.Time, trigger, e.JobName, e.State, e.Detail)
}
// DisplayFolder formats a job's folder for display: "(No folder)" if empty, // DisplayFolder formats a job's folder for display: "(No folder)" if empty,
// else the trimmed folder name. // else the trimmed folder name.
func DisplayFolder(folder string) string { func DisplayFolder(folder string) string {
@@ -68,6 +82,59 @@ func DisplayInvocation(job domain.Job) string {
return job.Command + " " + strings.ReplaceAll(strings.TrimSpace(job.Arguments), "\n", " ") return job.Command + " " + strings.ReplaceAll(strings.TrimSpace(job.Arguments), "\n", " ")
} }
// DisplayStats returns a one-line execution-time summary for a job runtime,
// with the queued-run depth appended whenever the "queue" overlap policy has
// deferred runs waiting (see maxPendingRuns). Returns "No runs recorded" when
// no runs have been counted yet, still showing the queue depth if one exists.
func DisplayStats(rt *domain.JobRuntime) string {
if rt == nil || rt.RunCount == 0 {
if rt != nil && rt.PendingRuns > 0 {
return "No runs recorded" + pendingRunsSuffix(rt.PendingRuns)
}
return "No runs recorded"
}
return fmt.Sprintf("%d runs, %d failed, last %d ms, avg %d ms, max %d ms",
rt.RunCount, rt.FailCount, rt.LastDurationMS, rt.AvgDurationMS, rt.MaxDurationMS) +
pendingRunsSuffix(rt.PendingRuns)
}
// pendingRunsSuffix formats the queued-run depth for DisplayStats, empty when
// nothing is queued.
func pendingRunsSuffix(pending int) string {
if pending <= 0 {
return ""
}
return fmt.Sprintf(", %d queued", pending)
}
// DisplayOverlapPolicy formats a job's effective overlap policy for the details
// panel. When the job has its own policy it is shown as-is; when empty (inherit
// global), the global default is shown with "(global default)" appended.
func DisplayOverlapPolicy(job domain.Job, globalPolicy domain.OverlapPolicy) string {
if p := domain.OverlapPolicy(strings.TrimSpace(job.OverlapPolicy)); p != "" {
return string(p)
}
return string(globalPolicy) + " (global default)"
}
// DisplayTimeout formats a job's effective run timeout for the details panel.
// When the job sets its own TimeoutSeconds it is shown as-is, with an explicit 0
// rendered as "no timeout"; when unset (nil), the global default is shown with
// "(global default)" appended, mirroring DisplayOverlapPolicy. A non-positive
// global default means no timeout at all.
func DisplayTimeout(job domain.Job, globalDefault int) string {
if job.TimeoutSeconds != nil {
if *job.TimeoutSeconds <= 0 {
return "no timeout"
}
return fmt.Sprintf("%d s", *job.TimeoutSeconds)
}
if globalDefault <= 0 {
return "no timeout (global default)"
}
return fmt.Sprintf("%d s (global default)", globalDefault)
}
// DisplayIndex returns the position of jobIndex in the given slice of indexes, // DisplayIndex returns the position of jobIndex in the given slice of indexes,
// or 0 if not found. // or 0 if not found.
func DisplayIndex(indexes []int, jobIndex int) int { func DisplayIndex(indexes []int, jobIndex int) int {
src/app/format_test.go
+94
View File
@@ -98,3 +98,97 @@ func TestDisplayIndex(t *testing.T) {
t.Errorf("DisplayIndex(missing) = %d, want 0", got) t.Errorf("DisplayIndex(missing) = %d, want 0", got)
} }
} }
func TestDisplayStats(t *testing.T) {
// Zero RunCount → sentinel string.
if got := DisplayStats(nil); got != "No runs recorded" {
t.Errorf("nil runtime = %q, want %q", got, "No runs recorded")
}
if got := DisplayStats(&domain.JobRuntime{}); got != "No runs recorded" {
t.Errorf("zero runtime = %q, want %q", got, "No runs recorded")
}
rt := &domain.JobRuntime{
RunCount: 5,
FailCount: 2,
LastDurationMS: 450,
AvgDurationMS: 380,
MaxDurationMS: 520,
}
want := "5 runs, 2 failed, last 450 ms, avg 380 ms, max 520 ms"
if got := DisplayStats(rt); got != want {
t.Errorf("DisplayStats = %q, want %q", got, want)
}
// Zero failures are included in the output (not hidden).
rtNoFail := &domain.JobRuntime{RunCount: 3, FailCount: 0, LastDurationMS: 100, AvgDurationMS: 90, MaxDurationMS: 110}
wantNoFail := "3 runs, 0 failed, last 100 ms, avg 90 ms, max 110 ms"
if got := DisplayStats(rtNoFail); got != wantNoFail {
t.Errorf("DisplayStats no-fail = %q, want %q", got, wantNoFail)
}
// A "queue" overlap backlog is appended to whichever form applies, so it stays
// visible even before the first run has completed.
if got, want := DisplayStats(&domain.JobRuntime{PendingRuns: 2}), "No runs recorded, 2 queued"; got != want {
t.Errorf("DisplayStats pending, no runs = %q, want %q", got, want)
}
rtPending := &domain.JobRuntime{RunCount: 5, FailCount: 2, LastDurationMS: 450, AvgDurationMS: 380, MaxDurationMS: 520, PendingRuns: 3}
wantPending := "5 runs, 2 failed, last 450 ms, avg 380 ms, max 520 ms, 3 queued"
if got := DisplayStats(rtPending); got != wantPending {
t.Errorf("DisplayStats pending = %q, want %q", got, wantPending)
}
}
func TestEventLine(t *testing.T) {
withLog := domain.RunRecord{
Time: "2026-06-19 12:00:00", Trigger: "Schedule", JobName: "Build",
State: "Success", Detail: "ok", LogFile: "/home/user/logs/build-20260619.log",
}
if got, want := EventLine(withLog), "2026-06-19 12:00:00 Schedule Build Success ok build-20260619.log"; got != want {
t.Errorf("EventLine with log = %q, want %q", got, want)
}
noLog := domain.RunRecord{
Time: "2026-06-19 12:00:00", Trigger: "Manual", JobName: "Build",
State: "Success", Detail: "ok",
}
if got, want := EventLine(noLog), "2026-06-19 12:00:00 Manual Build Success ok"; got != want {
t.Errorf("EventLine without log = %q, want %q", got, want)
}
// An empty trigger is shown as "Unknown".
blank := domain.RunRecord{Time: "t", JobName: "J", State: "S", Detail: "d", LogFile: "/path/to/file.log"}
if got, want := EventLine(blank), "t Unknown J S d file.log"; got != want {
t.Errorf("EventLine blank trigger = %q, want %q", got, want)
}
}
func TestDisplayOverlapPolicy(t *testing.T) {
global := domain.OverlapPolicyQueue
jobOwn := domain.Job{OverlapPolicy: string(domain.OverlapPolicySkip)}
if got, want := DisplayOverlapPolicy(jobOwn, global), "skip"; got != want {
t.Errorf("per-job policy = %q, want %q", got, want)
}
inherit := domain.Job{OverlapPolicy: ""}
if got, want := DisplayOverlapPolicy(inherit, global), "queue (global default)"; got != want {
t.Errorf("inherited policy = %q, want %q", got, want)
}
}
func TestDisplayTimeout(t *testing.T) {
own := domain.Job{TimeoutSeconds: domain.TimeoutSecondsPtr(45)}
if got, want := DisplayTimeout(own, 30), "45 s"; got != want {
t.Errorf("per-job timeout = %q, want %q", got, want)
}
none := domain.Job{TimeoutSeconds: domain.TimeoutSecondsPtr(0)}
if got, want := DisplayTimeout(none, 30), "no timeout"; got != want {
t.Errorf("explicit per-job zero timeout = %q, want %q", got, want)
}
inherit := domain.Job{TimeoutSeconds: nil}
if got, want := DisplayTimeout(inherit, 30), "30 s (global default)"; got != want {
t.Errorf("inherited timeout = %q, want %q", got, want)
}
if got, want := DisplayTimeout(inherit, 0), "no timeout (global default)"; got != want {
t.Errorf("inherited infinite timeout = %q, want %q", got, want)
}
}
src/app/operations.go
+192 -30
View File
@@ -3,11 +3,13 @@ package app
import ( import (
"errors" "errors"
"fmt" "fmt"
"path/filepath"
"strings" "strings"
"time" "time"
"gitea.mixdep.ru/mix/gosentry/src/domain" "gitea.mixdep.ru/mix/gosentry/src/domain"
"gitea.mixdep.ru/mix/gosentry/src/runner" "gitea.mixdep.ru/mix/gosentry/src/runner"
"gitea.mixdep.ru/mix/gosentry/src/storage"
) )
// maxJobLogs bounds the in-memory activity list kept per job. The full history // maxJobLogs bounds the in-memory activity list kept per job. The full history
@@ -41,12 +43,26 @@ func (s *Service) CreateJob(job domain.Job) (domain.Job, error) {
s.parseScheduleLocked(&job) s.parseScheduleLocked(&job)
record := uiRecord(job.ID, job.Name, "Created", "Job was added") record := uiRecord(job.ID, job.Name, "Created", "Job was added")
prependLog(runtime, record) prependLog(runtime, record)
err := s.store.SaveJobs(s.jobs) save := s.deferSaveLocked(s.store.PrepareSaveJobs(s.jobs))
s.mu.Unlock() s.mu.Unlock()
if err := save(); err != nil {
// The write is atomic, so a failure left the file holding the previous
// list: take the job back out so memory matches what is on disk. Another
// operation may have run in between, so it is removed by ID rather than by
// truncating the slice.
s.mu.Lock()
if index := s.indexByIDLocked(job.ID); index >= 0 {
s.jobs = append(s.jobs[:index], s.jobs[index+1:]...)
}
delete(s.runtimes, job.ID)
delete(s.schedules, job.ID)
s.mu.Unlock()
return domain.Job{}, err
}
s.emit(RunRecorded{Record: record}) s.emit(RunRecorded{Record: record})
s.emit(JobChanged{JobID: job.ID}) s.emit(JobChanged{JobID: job.ID})
return job, err return job, nil
} }
// UpdateJob replaces the durable configuration of the job with the same ID, // UpdateJob replaces the durable configuration of the job with the same ID,
@@ -79,12 +95,15 @@ func (s *Service) UpdateJob(job domain.Job) error {
s.refreshNextRunLocked(existing, runtime) s.refreshNextRunLocked(existing, runtime)
record := uiRecord(job.ID, job.Name, "Updated", "Job settings changed") record := uiRecord(job.ID, job.Name, "Updated", "Job settings changed")
prependLog(runtime, record) prependLog(runtime, record)
err := s.store.SaveJobs(s.jobs) save := s.deferSaveLocked(s.store.PrepareSaveJobs(s.jobs))
s.mu.Unlock() s.mu.Unlock()
if err := save(); err != nil {
return err
}
s.emit(RunRecorded{Record: record}) s.emit(RunRecorded{Record: record})
s.emit(JobChanged{JobID: job.ID}) s.emit(JobChanged{JobID: job.ID})
return err return nil
} }
// DeleteJob removes the job with the given ID along with its runtime and cached // DeleteJob removes the job with the given ID along with its runtime and cached
@@ -102,12 +121,15 @@ func (s *Service) DeleteJob(id int) error {
delete(s.runtimes, id) delete(s.runtimes, id)
delete(s.schedules, id) delete(s.schedules, id)
record := uiRecord(id, deleted.Name, "Deleted", "Job was removed") record := uiRecord(id, deleted.Name, "Deleted", "Job was removed")
err := s.store.SaveJobs(s.jobs) save := s.deferSaveLocked(s.store.PrepareSaveJobs(s.jobs))
s.mu.Unlock() s.mu.Unlock()
if err := save(); err != nil {
return err
}
s.emit(RunRecorded{Record: record}) s.emit(RunRecorded{Record: record})
s.emit(JobChanged{JobID: 0}) s.emit(JobChanged{JobID: 0})
return err return nil
} }
// SetEnabled enables or disables a single job. Enabling moves it back to "Ready" // SetEnabled enables or disables a single job. Enabling moves it back to "Ready"
@@ -134,40 +156,80 @@ func (s *Service) SetEnabled(id int, enabled bool) error {
runtime.LastState = "Paused" runtime.LastState = "Paused"
runtime.NextRun = "Paused" runtime.NextRun = "Paused"
runtime.NextDue = time.Time{} runtime.NextDue = time.Time{}
// A disabled job's own occurrences stop firing, so a "queue" backlog it was
// carrying no longer corresponds to anything: clear it rather than replaying
// stale deferred runs if the job is re-enabled later.
runtime.PendingRuns = 0
record = uiRecord(id, job.Name, "Paused", "Job was disabled") record = uiRecord(id, job.Name, "Paused", "Job was disabled")
} }
prependLog(runtime, record) prependLog(runtime, record)
err := s.store.SaveJobs(s.jobs) save := s.deferSaveLocked(s.store.PrepareSaveJobs(s.jobs))
s.mu.Unlock() s.mu.Unlock()
if err := save(); err != nil {
return err
}
s.emit(RunRecorded{Record: record}) s.emit(RunRecorded{Record: record})
s.emit(JobChanged{JobID: id}) s.emit(JobChanged{JobID: id})
return err return nil
} }
// SetGlobalPause flips the global pause that gates all execution, scheduled and // SetGlobalPause flips the global pause that gates scheduled execution.
// manual. Each enabled job's next-run text reflects the new state immediately so // Manual "Run now" remains available while paused. Each enabled job's next-run
// the list view is understandable before the next tick. A "Paused"/"Resumed" // text reflects the new state immediately so the list view is understandable
// scheduler activity record and a SchedulerStateChanged event are emitted. // before the next tick. A "Paused"/"Resumed" scheduler activity record and a
// SchedulerStateChanged event are emitted.
func (s *Service) SetGlobalPause(paused bool) error { func (s *Service) SetGlobalPause(paused bool) error {
s.mu.Lock() s.mu.Lock()
s.paused = paused s.paused = paused
s.store.Config.Paused = paused
now := time.Now() now := time.Now()
for index := range s.jobs { for index := range s.jobs {
job := &s.jobs[index] job := &s.jobs[index]
runtime := s.runtimeForLocked(job) runtime := s.runtimeForLocked(job)
if paused {
// A "queue" backlog counts occurrences missed *while paused is off*; once
// paused, none of those correspond to anything the user would expect
// replayed on resume, so drop it rather than letting a stale counter fire
// a deferred run for an occurrence from before the pause.
runtime.PendingRuns = 0
}
s.refreshNextRunFromLocked(job, runtime, now) s.refreshNextRunFromLocked(job, runtime, now)
} }
err := s.store.SaveJobs(s.jobs) save := s.deferSaveLocked(s.store.PrepareSaveConfig())
s.mu.Unlock() s.mu.Unlock()
if err := save(); err != nil {
return err
}
state, detail := "Resumed", "All job execution resumed" state, detail := "Resumed", "All job execution resumed"
if paused { if paused {
state, detail = "Paused", "All job execution paused" state, detail = "Paused", "All job execution paused"
} }
s.emit(RunRecorded{Record: uiRecord(0, "Scheduler", state, detail)}) s.emit(RunRecorded{Record: uiRecord(0, "Scheduler", state, detail)})
s.emit(SchedulerStateChanged{Paused: paused}) s.emit(SchedulerStateChanged{Paused: paused})
return err return nil
}
// SetJobListView persists the Jobs list density preference. Unlike
// SetGlobalPause this touches nothing but the config: no job changed, so there
// is no SaveJobs, and no event is emitted — the choice is presentational and the
// Jobs view refreshes its own list, whereas an event would trigger a pointless
// whole-window refresh. Anything that is not "compact" is stored as detailed so
// the file never gains an unrecognised value.
func (s *Service) SetJobListView(view domain.JobListView) error {
if !view.IsCompact() {
view = domain.JobListViewDetailed
}
s.mu.Lock()
if s.store.Config.JobListView == view {
s.mu.Unlock()
return nil
}
s.store.Config.JobListView = view
save := s.deferSaveLocked(s.store.PrepareSaveConfig())
s.mu.Unlock()
return save()
} }
// ShouldNotifyOnFailure reports whether the user has enabled desktop // ShouldNotifyOnFailure reports whether the user has enabled desktop
@@ -180,30 +242,92 @@ func (s *Service) ShouldNotifyOnFailure() bool {
} }
// UpdateSettings validates and persists a new application configuration. The // UpdateSettings validates and persists a new application configuration. The
// loaded jobs are re-saved because the jobs directory may have changed, and log // loaded jobs are re-saved because the jobs file may have changed, and log
// cleanup runs so a tightened retention policy takes effect immediately. // cleanup runs so a tightened retention policy takes effect immediately.
//
// Pointing the config at a different jobs file that already exists adopts that
// file: its jobs replace the loaded ones, which is the only way the user can
// switch between job lists. A path with no file there yet receives the current
// jobs instead, which is how the jobs file is renamed or relocated. Adoption
// discards all runtime state, so it is refused while a job is running.
func (s *Service) UpdateSettings(config domain.Config) error { func (s *Service) UpdateSettings(config domain.Config) error {
if err := validateConfig(config); err != nil { if err := validateConfig(config); err != nil {
return err return err
} }
// The path is stored exactly as it is resolved, so a hand-typed value with
// stray spaces cannot make the saved setting and the file in use disagree.
config.JobsFile = strings.TrimSpace(config.JobsFile)
s.mu.Lock() s.mu.Lock()
// AppDir is fixed for the process and only UpdateSettings itself — a UI
// action — can move JobsPath, so this snapshot stays valid across the reads
// below.
appDir := s.store.Paths.AppDir
jobsPath := storage.ResolveConfiguredPath(appDir, config.JobsFile)
switching := jobsPath != s.store.Paths.JobsPath
running := s.anyRunningLocked()
s.mu.Unlock()
if switching && running {
return errors.New("cannot change the jobs file while a job is running")
}
// Read the new file, and reconstruct its jobs' statistics from the logs the
// new config points at, before anything is written and while no lock is held:
// both are file I/O, and SeedStats opens every log in the directory. A file
// that cannot be parsed leaves both the config and the current jobs untouched.
var adopted []domain.Job
var seeds map[int]runner.SeededStats
if switching {
jobs, found, err := storage.LoadJobsFile(jobsPath)
if err != nil {
return fmt.Errorf("read jobs file %s: %w", jobsPath, err)
}
if found {
adopted = jobs
seeds = runner.SeedStats(storage.ResolveConfiguredPath(appDir, config.LogsDir), jobs, config.MaxLogFiles)
}
}
s.mu.Lock()
// The guard above was evaluated before the reads, off the lock, so re-check
// it: a scheduled run may have started in the meantime, and adoption drops
// every runtime.
if switching && s.anyRunningLocked() {
s.mu.Unlock()
return errors.New("cannot change the jobs file while a job is running")
}
s.store.Config = config s.store.Config = config
if err := s.store.SaveConfig(); err != nil { saveConfig := s.store.PrepareSaveConfig()
s.mu.Unlock() if adopted != nil {
return err s.adoptJobsLocked(adopted)
} s.applySeededStatsLocked(seeds)
// SaveConfig re-resolved the paths from the new config, so SaveJobs writes to
// the (possibly new) jobs directory and cleanup targets the new logs dir.
if err := s.store.SaveJobs(s.jobs); err != nil {
s.mu.Unlock()
return err
} }
// PrepareSaveConfig re-resolved the paths from the new config, so the jobs
// write targets the (possibly new) jobs file and cleanup targets the new logs
// dir. Adopted jobs are written back too, which persists the IDs and defaults
// that normalization filled in, exactly as loading them at startup would. The
// jobs write is skipped when the config write fails, because both writes run
// in the order prepared and stop at the first error.
save := s.deferSaveLocked(saveConfig, s.store.PrepareSaveJobs(s.jobs))
loaded := len(s.jobs)
logsDir := s.store.Paths.LogsDir logsDir := s.store.Paths.LogsDir
maxFiles := s.store.Config.MaxLogFiles maxFiles := s.store.Config.MaxLogFiles
maxAge := s.store.Config.MaxLogAgeDays maxAge := s.store.Config.MaxLogAgeDays
s.mu.Unlock() s.mu.Unlock()
saveErr := save()
if adopted != nil {
// A broad JobChanged redraws the job list; JobsLoaded tells the user in
// History which file those jobs came from, since nothing was asked. Both
// are emitted even when the write failed: the adopted jobs are already the
// in-memory list, and a job list the user cannot see would be worse than
// the error they are about to be shown.
s.emit(JobsLoaded{Path: jobsPath, Count: loaded})
s.emit(JobChanged{})
}
if saveErr != nil {
return saveErr
}
return runner.CleanupLogs(logsDir, maxFiles, maxAge) return runner.CleanupLogs(logsDir, maxFiles, maxAge)
} }
@@ -340,22 +464,52 @@ func validateJob(job domain.Job) error {
if job.Name == "" || job.Schedule == "" || job.Command == "" { if job.Name == "" || job.Schedule == "" || job.Command == "" {
return errors.New("name, schedule, and command are required") return errors.New("name, schedule, and command are required")
} }
policy := strings.TrimSpace(job.OverlapPolicy)
if policy != "" && policy != string(domain.OverlapPolicySkip) && policy != string(domain.OverlapPolicyQueue) {
return errors.New("overlap policy must be 'skip', 'queue', or empty")
}
if job.TimeoutSeconds != nil && *job.TimeoutSeconds < 0 {
return errors.New("timeout must be zero (no timeout) or a positive number of seconds, or unset to inherit the global default")
}
return nil return nil
} }
// hasFileName reports whether a path ends in something that can be a file name.
// It is a syntax check only — an existing directory whose name looks like a file
// name still passes, and fails at write time — but it catches the shapes a user
// types when they mean a folder: a trailing separator, "." and "..".
func hasFileName(path string) bool {
if strings.HasSuffix(path, "/") || strings.HasSuffix(path, string(filepath.Separator)) {
return false
}
switch filepath.Base(path) {
case ".", "..", string(filepath.Separator):
return false
}
return true
}
// validateConfig rejects settings that would break persistence or cleanup. // validateConfig rejects settings that would break persistence or cleanup.
func validateConfig(config domain.Config) error { func validateConfig(config domain.Config) error {
if strings.TrimSpace(config.JobsDir) == "" { jobsFile := strings.TrimSpace(config.JobsFile)
return errors.New("jobs directory is required") if jobsFile == "" {
return errors.New("jobs file is required")
}
// A path that names only a folder would be written to as if it were a file
// and fail later with an opaque OS error, so require a file name here.
if !hasFileName(jobsFile) {
return errors.New("jobs file must include a file name")
} }
if strings.TrimSpace(config.LogsDir) == "" { if strings.TrimSpace(config.LogsDir) == "" {
return errors.New("logs directory is required") return errors.New("logs directory is required")
} }
if config.MaxLogFiles <= 0 { // 0 means "keep everything" (see runner.CleanupLogs); only a negative count
return errors.New("max log files must be a positive number") // is rejected, the same three-state shape as DefaultTimeoutSeconds below.
if config.MaxLogFiles < 0 {
return errors.New("max log files must be zero (unlimited) or a positive number")
} }
if config.MaxLogAgeDays <= 0 { if config.MaxLogAgeDays < 0 {
return errors.New("max log age days must be a positive number") return errors.New("max log age days must be zero (unlimited) or a positive number")
} }
if config.ExecutionMode != domain.ExecutionModeParallel && config.ExecutionMode != domain.ExecutionModeSequential { if config.ExecutionMode != domain.ExecutionModeParallel && config.ExecutionMode != domain.ExecutionModeSequential {
return errors.New("execution mode must be 'parallel' or 'sequential'") return errors.New("execution mode must be 'parallel' or 'sequential'")
@@ -363,5 +517,13 @@ func validateConfig(config domain.Config) error {
if config.OverlapPolicy != domain.OverlapPolicySkip && config.OverlapPolicy != domain.OverlapPolicyQueue { if config.OverlapPolicy != domain.OverlapPolicySkip && config.OverlapPolicy != domain.OverlapPolicyQueue {
return errors.New("overlap policy must be 'skip' or 'queue'") return errors.New("overlap policy must be 'skip' or 'queue'")
} }
if config.DefaultTimeoutSeconds < 0 {
return errors.New("default timeout must not be negative (0 means no timeout)")
}
// Empty Theme is accepted and normalized to the branded theme on load, so
// older configs (and hand-built ones) stay valid without an explicit theme.
if config.Theme != "" && config.Theme != domain.ThemeSystem && config.Theme != domain.ThemeGoSentry {
return errors.New("theme must be 'system' or 'gosentry'")
}
return nil return nil
} }
src/app/operations_test.go
+478 -31
View File
@@ -2,7 +2,11 @@ package app
import ( import (
"context" "context"
"encoding/json"
"fmt"
"os"
"path/filepath" "path/filepath"
"sync"
"sync/atomic" "sync/atomic"
"testing" "testing"
"time" "time"
@@ -25,7 +29,7 @@ func newTempService(t *testing.T, jobs []domain.Job) *Service {
JobsPath: filepath.Join(dir, "jobs.json"), JobsPath: filepath.Join(dir, "jobs.json"),
LogsDir: filepath.Join(dir, "logs"), LogsDir: filepath.Join(dir, "logs"),
}, },
Config: domain.Config{JobsDir: ".", LogsDir: "logs", MaxLogFiles: 100, MaxLogAgeDays: 30, ExecutionMode: domain.ExecutionModeParallel, OverlapPolicy: domain.OverlapPolicySkip}, Config: domain.Config{JobsFile: "jobs.json", LogsDir: "logs", MaxLogFiles: 100, MaxLogAgeDays: 30, ExecutionMode: domain.ExecutionModeParallel, OverlapPolicy: domain.OverlapPolicySkip, DefaultTimeoutSeconds: 30},
} }
return NewService(store, jobs) return NewService(store, jobs)
} }
@@ -98,6 +102,16 @@ func TestCreateJobValidates(t *testing.T) {
if got := svc.Jobs(); len(got) != 0 { if got := svc.Jobs(); len(got) != 0 {
t.Errorf("invalid job should not be stored, jobs = %+v", got) t.Errorf("invalid job should not be stored, jobs = %+v", got)
} }
if _, err := svc.CreateJob(domain.Job{Name: "A", Schedule: "@every 1m", Command: "echo", OverlapPolicy: "invalid"}); err == nil {
t.Error("expected error for invalid overlap policy")
}
if _, err := svc.CreateJob(domain.Job{Name: "A", Schedule: "@every 1m", Command: "echo", TimeoutSeconds: domain.TimeoutSecondsPtr(-1)}); err == nil {
t.Error("expected error for negative per-job timeout")
}
// An explicit 0 is a valid choice ("no timeout"), not a rejected one.
if _, err := svc.CreateJob(domain.Job{Name: "Zero", Schedule: "@every 1m", Command: "echo", TimeoutSeconds: domain.TimeoutSecondsPtr(0)}); err != nil {
t.Errorf("explicit zero per-job timeout should be accepted: %v", err)
}
} }
func TestUpdateJobKeepsRuntimeAndReflectsDisable(t *testing.T) { func TestUpdateJobKeepsRuntimeAndReflectsDisable(t *testing.T) {
@@ -205,6 +219,23 @@ func TestSetEnabledToggles(t *testing.T) {
} }
} }
// TestSetEnabledClearsPendingRuns verifies that disabling a job drops any
// "queue" overlap backlog it was carrying, so re-enabling it later does not
// replay a deferred run for an occurrence that fired before the disable.
func TestSetEnabledClearsPendingRuns(t *testing.T) {
svc := newTempService(t, []domain.Job{{ID: 1, Name: "A", Schedule: "@every 1m", Command: "echo", Enabled: true}})
svc.mu.Lock()
svc.runtimes[1].PendingRuns = 2
svc.mu.Unlock()
if err := svc.SetEnabled(1, false); err != nil {
t.Fatalf("SetEnabled false: %v", err)
}
if rt := svc.Runtime(1); rt.PendingRuns != 0 {
t.Errorf("PendingRuns after disable = %d, want 0", rt.PendingRuns)
}
}
func TestSetGlobalPauseUpdatesRuntimesAndEmits(t *testing.T) { func TestSetGlobalPauseUpdatesRuntimesAndEmits(t *testing.T) {
svc := newTempService(t, []domain.Job{ svc := newTempService(t, []domain.Job{
{ID: 1, Name: "On", Schedule: "@every 1m", Command: "echo", Enabled: true}, {ID: 1, Name: "On", Schedule: "@every 1m", Command: "echo", Enabled: true},
@@ -245,11 +276,11 @@ func TestRunNowUsesRunnerAndRecords(t *testing.T) {
svc := newTempService(t, []domain.Job{{ID: 1, Name: "A", Schedule: "@every 1m", Command: "echo", Enabled: true}}) svc := newTempService(t, []domain.Job{{ID: 1, Name: "A", Schedule: "@every 1m", Command: "echo", Enabled: true}})
done := make(chan domain.RunRecord, 1) done := make(chan domain.RunRecord, 1)
svc.runJob = func(_ context.Context, job *domain.Job, trigger string, _ string) domain.RunRecord { svc.runJob = func(_ context.Context, job *domain.Job, trigger string, _ string, _ time.Duration) (domain.RunRecord, error) {
if trigger != "Manual" { if trigger != "Manual" {
t.Errorf("trigger = %q, want Manual", trigger) t.Errorf("trigger = %q, want Manual", trigger)
} }
return domain.RunRecord{Time: "2026-06-19 12:00:00", JobID: job.ID, JobName: job.Name, State: "Success", Output: "ok"} return domain.RunRecord{Time: "2026-06-19 12:00:00", JobID: job.ID, JobName: job.Name, State: "Success", Output: "ok"}, nil
} }
svc.Subscribe(ObserverFunc(func(e Event) { svc.Subscribe(ObserverFunc(func(e Event) {
if rr, ok := e.(RunRecorded); ok && rr.Record.JobID == 1 { if rr, ok := e.(RunRecorded); ok && rr.Record.JobID == 1 {
@@ -293,11 +324,11 @@ func TestRunNowRefusedWhileAlreadyRunning(t *testing.T) {
entered := make(chan struct{}, 1) entered := make(chan struct{}, 1)
release := make(chan struct{}) release := make(chan struct{})
var calls int32 var calls int32
svc.runJob = func(_ context.Context, job *domain.Job, _ string, _ string) domain.RunRecord { svc.runJob = func(_ context.Context, job *domain.Job, _ string, _ string, _ time.Duration) (domain.RunRecord, error) {
atomic.AddInt32(&calls, 1) atomic.AddInt32(&calls, 1)
entered <- struct{}{} entered <- struct{}{}
<-release <-release
return domain.RunRecord{Time: "2026-06-19 12:00:00", JobID: job.ID, JobName: job.Name, State: "Success"} return domain.RunRecord{Time: "2026-06-19 12:00:00", JobID: job.ID, JobName: job.Name, State: "Success"}, nil
} }
done := make(chan struct{}, 1) done := make(chan struct{}, 1)
svc.Subscribe(ObserverFunc(func(e Event) { svc.Subscribe(ObserverFunc(func(e Event) {
@@ -333,21 +364,27 @@ func TestRunNowRefusedWhileAlreadyRunning(t *testing.T) {
} }
} }
func TestRunNowRefusedWhilePaused(t *testing.T) { func TestRunNowAllowedWhilePaused(t *testing.T) {
svc := newTempService(t, []domain.Job{{ID: 1, Name: "A", Schedule: "@every 1m", Command: "echo", Enabled: true}}) svc := newTempService(t, []domain.Job{{ID: 1, Name: "A", Schedule: "@every 1m", Command: "echo", Enabled: true}})
var ran bool done := make(chan struct{}, 1)
svc.runJob = func(context.Context, *domain.Job, string, string) domain.RunRecord { svc.runJob = func(context.Context, *domain.Job, string, string, time.Duration) (domain.RunRecord, error) {
ran = true select {
return domain.RunRecord{} case done <- struct{}{}:
default:
}
return domain.RunRecord{State: "Success"}, nil
} }
if err := svc.SetGlobalPause(true); err != nil { if err := svc.SetGlobalPause(true); err != nil {
t.Fatalf("SetGlobalPause: %v", err) t.Fatalf("SetGlobalPause: %v", err)
} }
if err := svc.RunNow(1); err == nil { // Pause stops only scheduled runs; an explicit manual run is still allowed.
t.Error("expected RunNow to be refused while paused") if err := svc.RunNow(1); err != nil {
t.Fatalf("RunNow should be allowed while paused: %v", err)
} }
if ran { select {
t.Error("runner must not be invoked while paused") case <-done:
case <-time.After(2 * time.Second):
t.Error("runner was not invoked for a manual run while paused")
} }
} }
@@ -355,11 +392,11 @@ func TestRunDueStartsDueJob(t *testing.T) {
svc := newTempService(t, []domain.Job{{ID: 1, Name: "A", Schedule: "@every 1m", Command: "echo", Enabled: true}}) svc := newTempService(t, []domain.Job{{ID: 1, Name: "A", Schedule: "@every 1m", Command: "echo", Enabled: true}})
done := make(chan domain.RunRecord, 1) done := make(chan domain.RunRecord, 1)
svc.runJob = func(_ context.Context, job *domain.Job, trigger string, _ string) domain.RunRecord { svc.runJob = func(_ context.Context, job *domain.Job, trigger string, _ string, _ time.Duration) (domain.RunRecord, error) {
if trigger != "Schedule" { if trigger != "Schedule" {
t.Errorf("trigger = %q, want Schedule", trigger) t.Errorf("trigger = %q, want Schedule", trigger)
} }
return domain.RunRecord{Time: "2026-06-19 12:00:00", JobID: job.ID, JobName: job.Name, State: "Success", Output: "ok"} return domain.RunRecord{Time: "2026-06-19 12:00:00", JobID: job.ID, JobName: job.Name, State: "Success", Output: "ok"}, nil
} }
svc.Subscribe(ObserverFunc(func(e Event) { svc.Subscribe(ObserverFunc(func(e Event) {
if rr, ok := e.(RunRecorded); ok && rr.Record.JobID == 1 && rr.Record.State == "Success" { if rr, ok := e.(RunRecorded); ok && rr.Record.JobID == 1 && rr.Record.State == "Success" {
@@ -386,9 +423,9 @@ func TestRunDueStartsDueJob(t *testing.T) {
func TestRunDueSkipsJobNotYetDue(t *testing.T) { func TestRunDueSkipsJobNotYetDue(t *testing.T) {
svc := newTempService(t, []domain.Job{{ID: 1, Name: "A", Schedule: "@every 1m", Command: "echo", Enabled: true}}) svc := newTempService(t, []domain.Job{{ID: 1, Name: "A", Schedule: "@every 1m", Command: "echo", Enabled: true}})
var ran int32 var ran int32
svc.runJob = func(context.Context, *domain.Job, string, string) domain.RunRecord { svc.runJob = func(context.Context, *domain.Job, string, string, time.Duration) (domain.RunRecord, error) {
atomic.AddInt32(&ran, 1) atomic.AddInt32(&ran, 1)
return domain.RunRecord{} return domain.RunRecord{}, nil
} }
// Next-due is ~1m out, so nothing is due "now". // Next-due is ~1m out, so nothing is due "now".
@@ -407,9 +444,9 @@ func TestRunDueSkipsJobInRunningState(t *testing.T) {
svc := newTempService(t, []domain.Job{{ID: 1, Name: "A", Schedule: "@every 1m", Command: "echo", Enabled: true}}) svc := newTempService(t, []domain.Job{{ID: 1, Name: "A", Schedule: "@every 1m", Command: "echo", Enabled: true}})
var calls int32 var calls int32
svc.runJob = func(context.Context, *domain.Job, string, string) domain.RunRecord { svc.runJob = func(context.Context, *domain.Job, string, string, time.Duration) (domain.RunRecord, error) {
atomic.AddInt32(&calls, 1) atomic.AddInt32(&calls, 1)
return domain.RunRecord{State: "Success"} return domain.RunRecord{State: "Success"}, nil
} }
// Force the job into "Running" with a past NextDue, simulating an in-flight // Force the job into "Running" with a past NextDue, simulating an in-flight
@@ -431,9 +468,9 @@ func TestRunDueSkipsJobInRunningState(t *testing.T) {
func TestRunDueDoesNothingWhilePaused(t *testing.T) { func TestRunDueDoesNothingWhilePaused(t *testing.T) {
svc := newTempService(t, []domain.Job{{ID: 1, Name: "A", Schedule: "@every 1m", Command: "echo", Enabled: true}}) svc := newTempService(t, []domain.Job{{ID: 1, Name: "A", Schedule: "@every 1m", Command: "echo", Enabled: true}})
var ran int32 var ran int32
svc.runJob = func(context.Context, *domain.Job, string, string) domain.RunRecord { svc.runJob = func(context.Context, *domain.Job, string, string, time.Duration) (domain.RunRecord, error) {
atomic.AddInt32(&ran, 1) atomic.AddInt32(&ran, 1)
return domain.RunRecord{} return domain.RunRecord{}, nil
} }
if err := svc.SetGlobalPause(true); err != nil { if err := svc.SetGlobalPause(true); err != nil {
t.Fatalf("SetGlobalPause: %v", err) t.Fatalf("SetGlobalPause: %v", err)
@@ -461,12 +498,12 @@ func TestStartDrivesRunDueOnTick(t *testing.T) {
svc := newTempService(t, []domain.Job{{ID: 1, Name: "A", Schedule: "@every 1m", Command: "echo", Enabled: true}}) svc := newTempService(t, []domain.Job{{ID: 1, Name: "A", Schedule: "@every 1m", Command: "echo", Enabled: true}})
done := make(chan struct{}, 1) done := make(chan struct{}, 1)
svc.runJob = func(context.Context, *domain.Job, string, string) domain.RunRecord { svc.runJob = func(context.Context, *domain.Job, string, string, time.Duration) (domain.RunRecord, error) {
select { select {
case done <- struct{}{}: case done <- struct{}{}:
default: default:
} }
return domain.RunRecord{State: "Success"} return domain.RunRecord{State: "Success"}, nil
} }
clock := &appFakeClock{ticks: make(chan time.Time, 1), now: time.Now().Add(2 * time.Minute)} clock := &appFakeClock{ticks: make(chan time.Time, 1), now: time.Now().Add(2 * time.Minute)}
@@ -485,9 +522,9 @@ func TestUpdateSettingsPersistsAndValidates(t *testing.T) {
svc := newTempService(t, nil) svc := newTempService(t, nil)
bad := svc.store.Config bad := svc.store.Config
bad.MaxLogFiles = 0 bad.MaxLogFiles = -1
if err := svc.UpdateSettings(bad); err == nil { if err := svc.UpdateSettings(bad); err == nil {
t.Error("expected validation error for non-positive max log files") t.Error("expected validation error for negative max log files")
} }
good := svc.store.Config good := svc.store.Config
@@ -496,8 +533,21 @@ func TestUpdateSettingsPersistsAndValidates(t *testing.T) {
if err := svc.UpdateSettings(good); err != nil { if err := svc.UpdateSettings(good); err != nil {
t.Fatalf("UpdateSettings: %v", err) t.Fatalf("UpdateSettings: %v", err)
} }
if svc.Store().Config.MaxLogAgeDays != 7 || svc.Store().Config.NotifyOnFailure { if svc.store.Config.MaxLogAgeDays != 7 || svc.store.Config.NotifyOnFailure {
t.Errorf("config not applied: %+v", svc.Store().Config) t.Errorf("config not applied: %+v", svc.store.Config)
}
// 0 means "keep everything" (see STANDARDS §Intentional behavior), not an
// invalid value, so it must be accepted and persisted rather than rejected
// or silently backfilled.
unlimited := svc.store.Config
unlimited.MaxLogFiles = 0
unlimited.MaxLogAgeDays = 0
if err := svc.UpdateSettings(unlimited); err != nil {
t.Fatalf("UpdateSettings with zero retention limits: %v", err)
}
if svc.store.Config.MaxLogFiles != 0 || svc.store.Config.MaxLogAgeDays != 0 {
t.Errorf("zero retention limits not preserved: %+v", svc.store.Config)
} }
} }
@@ -509,10 +559,12 @@ func TestUpdateSettingsRejectsInvalidConfigs(t *testing.T) {
name string name string
mutate func(c *domain.Config) mutate func(c *domain.Config)
}{ }{
{"missing jobs dir", func(c *domain.Config) { c.JobsDir = " " }}, {"missing jobs file", func(c *domain.Config) { c.JobsFile = " " }},
{"jobs file without a file name", func(c *domain.Config) { c.JobsFile = "jobs" + string(filepath.Separator) }},
{"missing logs dir", func(c *domain.Config) { c.LogsDir = "" }}, {"missing logs dir", func(c *domain.Config) { c.LogsDir = "" }},
{"non-positive max files", func(c *domain.Config) { c.MaxLogFiles = 0 }}, {"negative max files", func(c *domain.Config) { c.MaxLogFiles = -1 }},
{"non-positive max age", func(c *domain.Config) { c.MaxLogAgeDays = -1 }}, {"negative max age", func(c *domain.Config) { c.MaxLogAgeDays = -1 }},
{"negative default timeout", func(c *domain.Config) { c.DefaultTimeoutSeconds = -1 }},
} }
for _, tc := range tests { for _, tc := range tests {
t.Run(tc.name, func(t *testing.T) { t.Run(tc.name, func(t *testing.T) {
@@ -525,6 +577,265 @@ func TestUpdateSettingsRejectsInvalidConfigs(t *testing.T) {
} }
} }
func TestHasFileName(t *testing.T) {
tests := []struct {
path string
want bool
}{
{"jobs.json", true},
{filepath.Join("data", "team.json"), true},
{"jobs" + string(filepath.Separator), false},
{"data/", false},
{".", false},
{"..", false},
{string(filepath.Separator), false},
}
for _, tc := range tests {
if got := hasFileName(tc.path); got != tc.want {
t.Errorf("hasFileName(%q) = %v, want %v", tc.path, got, tc.want)
}
}
}
// Renaming or relocating the jobs file writes the loaded jobs to the new path,
// which is what makes the Settings change take effect without a restart.
func TestUpdateSettingsWritesJobsToTheNewFile(t *testing.T) {
svc := newTempService(t, []domain.Job{{ID: 1, Name: "Kept", Schedule: "@every 1m", Command: "echo hi", Enabled: true}})
config := svc.store.Config
config.JobsFile = filepath.Join("data", "team-jobs.json")
if err := svc.UpdateSettings(config); err != nil {
t.Fatalf("UpdateSettings: %v", err)
}
moved := filepath.Join(svc.store.Paths.AppDir, "data", "team-jobs.json")
if svc.store.Paths.JobsPath != moved {
t.Errorf("JobsPath: got %q, want %q", svc.store.Paths.JobsPath, moved)
}
data, err := os.ReadFile(moved)
if err != nil {
t.Fatalf("read moved jobs file: %v", err)
}
var file domain.JobsFile
if err := json.Unmarshal(data, &file); err != nil {
t.Fatalf("unmarshal moved jobs file: %v", err)
}
if len(file.Jobs) != 1 || file.Jobs[0].Name != "Kept" {
t.Errorf("moved jobs file: got %+v, want the single 'Kept' job", file.Jobs)
}
}
// Pointing Settings at a jobs file that already exists must adopt that file:
// its jobs replace the loaded ones instead of being overwritten by them. This is
// the only way the user can switch between job lists, so the file's contents
// win, the job list is rebuilt around them, and History is told where they came
// from.
func TestUpdateSettingsAdoptsExistingJobsFile(t *testing.T) {
svc := newTempService(t, []domain.Job{{ID: 1, Name: "Local", Schedule: "@every 1m", Command: "echo local", Enabled: true}})
rec := &recorder{}
svc.Subscribe(rec)
shared := filepath.Join(svc.store.Paths.AppDir, "shared.json")
existing := domain.JobsFile{Jobs: []domain.Job{
{ID: 4, Name: "Adopted", Schedule: "@every 5m", Command: "echo adopted", Enabled: true},
{Name: "Needs an ID", Schedule: "@every 9m", Command: "echo second", Enabled: false},
}}
data, err := json.Marshal(existing)
if err != nil {
t.Fatal(err)
}
if err := os.WriteFile(shared, data, 0o644); err != nil {
t.Fatal(err)
}
config := svc.store.Config
config.JobsFile = shared
if err := svc.UpdateSettings(config); err != nil {
t.Fatalf("UpdateSettings: %v", err)
}
jobs := svc.Jobs()
if len(jobs) != 2 || jobs[0].Name != "Adopted" {
t.Fatalf("jobs after adoption: got %+v, want the two jobs from the selected file", jobs)
}
// The adopted jobs must be fully live, not just listed: runtime and parsed
// schedule are rebuilt for the IDs the file brought (including the one
// normalization had to assign).
for _, job := range jobs {
if svc.Runtime(job.ID) == nil {
t.Errorf("job %d (%q) has no runtime after adoption", job.ID, job.Name)
}
}
if svc.Runtime(1) != nil {
t.Error("runtime of the replaced job should be gone")
}
var loaded []JobsLoaded
for _, e := range rec.events {
if jl, ok := e.(JobsLoaded); ok {
loaded = append(loaded, jl)
}
}
if len(loaded) != 1 || loaded[0].Path != shared || loaded[0].Count != 2 {
t.Errorf("JobsLoaded events: got %+v, want one for %q with 2 jobs", loaded, shared)
}
}
// A path with no file behind it is the "rename or relocate" case: the current
// jobs are written there rather than an empty list being adopted.
func TestUpdateSettingsKeepsJobsWhenTheNewFileIsMissing(t *testing.T) {
svc := newTempService(t, []domain.Job{{ID: 1, Name: "Local", Schedule: "@every 1m", Command: "echo local", Enabled: true}})
config := svc.store.Config
config.JobsFile = filepath.Join("moved", "jobs.json")
if err := svc.UpdateSettings(config); err != nil {
t.Fatalf("UpdateSettings: %v", err)
}
jobs := svc.Jobs()
if len(jobs) != 1 || jobs[0].Name != "Local" {
t.Fatalf("jobs after the move: got %+v, want the original job", jobs)
}
if _, err := os.Stat(filepath.Join(svc.store.Paths.AppDir, "moved", "jobs.json")); err != nil {
t.Errorf("jobs should have been written to the new path: %v", err)
}
}
// Adoption throws away every runtime, including the state of a run in flight,
// and a finishing run would then write its result onto whichever job inherited
// its ID. Refusing the switch is what keeps that from happening.
func TestUpdateSettingsRefusesJobsFileSwitchWhileRunning(t *testing.T) {
svc := newTempService(t, []domain.Job{{ID: 1, Name: "Long", Schedule: "@every 1h", Command: "echo long", Enabled: true}})
entered := make(chan int, 1)
release := make(chan struct{})
svc.runJob = func(_ context.Context, job *domain.Job, _ string, _ string, _ time.Duration) (domain.RunRecord, error) {
entered <- job.ID
<-release
return domain.RunRecord{Time: "t", JobID: job.ID, JobName: job.Name, State: "Success"}, nil
}
done := completions(svc)
if err := svc.RunNow(1); err != nil {
t.Fatalf("RunNow: %v", err)
}
<-entered
config := svc.store.Config
config.JobsFile = filepath.Join("elsewhere", "jobs.json")
if err := svc.UpdateSettings(config); err == nil {
t.Error("expected the jobs-file switch to be refused while a job is running")
}
if svc.store.Config.JobsFile == config.JobsFile {
t.Error("the refused switch must not have been persisted")
}
// A setting that does not touch the jobs file still saves during a run.
unrelated := svc.store.Config
unrelated.NotifyOnFailure = !unrelated.NotifyOnFailure
if err := svc.UpdateSettings(unrelated); err != nil {
t.Errorf("unrelated setting should still save during a run: %v", err)
}
close(release)
waitRecord(t, done)
}
// Adoption reconstructs the adopted jobs' aggregate statistics from the log
// files the new configuration points at. That scan opens every log in the
// directory, so UpdateSettings runs it before taking the state lock; this pins
// that its result still reaches the runtime map.
func TestUpdateSettingsSeedsAdoptedJobsFromLogs(t *testing.T) {
svc := newTempService(t, []domain.Job{{ID: 1, Name: "Local", Schedule: "@every 1m", Command: "echo local", Enabled: true}})
logsDir := svc.store.Paths.LogsDir
if err := os.MkdirAll(logsDir, 0o755); err != nil {
t.Fatal(err)
}
log := "time: 2026-08-05 10:00:00\njob_id: 7\njob_name: Adopted\ntrigger: Schedule\nstate: Failed\ndetail: boom\nduration: 1500\n\nstdout:\n<empty>\n"
if err := os.WriteFile(filepath.Join(logsDir, "20260805-100000_Adopted.log"), []byte(log), 0o644); err != nil {
t.Fatal(err)
}
shared := filepath.Join(svc.store.Paths.AppDir, "shared.json")
data, err := json.Marshal(domain.JobsFile{Jobs: []domain.Job{
{ID: 7, Name: "Adopted", Schedule: "@every 5m", Command: "echo adopted", Enabled: true},
}})
if err != nil {
t.Fatal(err)
}
if err := os.WriteFile(shared, data, 0o644); err != nil {
t.Fatal(err)
}
config := svc.store.Config
config.JobsFile = shared
if err := svc.UpdateSettings(config); err != nil {
t.Fatalf("UpdateSettings: %v", err)
}
runtime := svc.Runtime(7)
if runtime == nil {
t.Fatal("the adopted job has no runtime")
}
if runtime.RunCount != 1 || runtime.FailCount != 1 || runtime.LastDurationMS != 1500 {
t.Errorf("seeded stats: RunCount=%d FailCount=%d LastDurationMS=%d, want 1/1/1500",
runtime.RunCount, runtime.FailCount, runtime.LastDurationMS)
}
}
// Job saves run after mu is released, so one operation can be writing while
// another mutates state. deferSaveLocked takes its own lock while mu is still
// held, which is what keeps writes in mutation order: whatever changed the list
// last also wrote it last, so the file ends up matching memory instead of
// holding an older snapshot.
func TestConcurrentJobOperationsLeaveTheFileMatchingMemory(t *testing.T) {
svc := newTempService(t, nil)
const workers = 8
var wg sync.WaitGroup
for i := 0; i < workers; i++ {
wg.Add(1)
go func(i int) {
defer wg.Done()
job, err := svc.CreateJob(domain.Job{Name: fmt.Sprintf("Job %d", i), Schedule: "@every 1m", Command: "echo hi", Enabled: true})
if err != nil {
t.Errorf("CreateJob %d: %v", i, err)
return
}
if err := svc.SetEnabled(job.ID, false); err != nil {
t.Errorf("SetEnabled %d: %v", job.ID, err)
}
}(i)
}
wg.Wait()
memory := svc.Jobs()
if len(memory) != workers {
t.Fatalf("jobs in memory = %d, want %d", len(memory), workers)
}
saved, found, err := storage.LoadJobsFile(svc.store.Paths.JobsPath)
if err != nil || !found {
t.Fatalf("read jobs file: found=%v err=%v", found, err)
}
if len(saved) != len(memory) {
t.Fatalf("jobs on disk = %d, want %d: the last write must be the last mutation", len(saved), len(memory))
}
onDisk := make(map[int]domain.Job, len(saved))
for _, job := range saved {
onDisk[job.ID] = job
}
for _, job := range memory {
got, ok := onDisk[job.ID]
if !ok {
t.Errorf("job %d (%q) is in memory but missing from the file", job.ID, job.Name)
continue
}
if got.Name != job.Name || got.Enabled != job.Enabled {
t.Errorf("job %d on disk = %q/%v, want %q/%v", job.ID, got.Name, got.Enabled, job.Name, job.Enabled)
}
}
}
func TestPrependLogCapsActivityList(t *testing.T) { func TestPrependLogCapsActivityList(t *testing.T) {
runtime := &domain.JobRuntime{} runtime := &domain.JobRuntime{}
for i := 0; i < maxJobLogs+10; i++ { for i := 0; i < maxJobLogs+10; i++ {
@@ -534,3 +845,139 @@ func TestPrependLogCapsActivityList(t *testing.T) {
t.Errorf("activity list len = %d, want capped at %d", len(runtime.Logs), maxJobLogs) t.Errorf("activity list len = %d, want capped at %d", len(runtime.Logs), maxJobLogs)
} }
} }
func TestSetGlobalPausePersistsToConfigFile(t *testing.T) {
svc := newTempService(t, nil)
if err := svc.SetGlobalPause(true); err != nil {
t.Fatalf("SetGlobalPause: %v", err)
}
data, err := os.ReadFile(svc.store.Paths.ConfigPath)
if err != nil {
t.Fatalf("reading config file: %v", err)
}
var cfg domain.Config
if err := json.Unmarshal(data, &cfg); err != nil {
t.Fatalf("unmarshalling config: %v", err)
}
if !cfg.Paused {
t.Error("persisted config does not have Paused=true after SetGlobalPause(true)")
}
// Resuming clears the flag on disk.
if err := svc.SetGlobalPause(false); err != nil {
t.Fatalf("SetGlobalPause(false): %v", err)
}
data, err = os.ReadFile(svc.store.Paths.ConfigPath)
if err != nil {
t.Fatalf("reading config file after resume: %v", err)
}
var cfg2 domain.Config
if err := json.Unmarshal(data, &cfg2); err != nil {
t.Fatalf("unmarshalling config after resume: %v", err)
}
if cfg2.Paused {
t.Error("persisted config still has Paused=true after SetGlobalPause(false)")
}
}
func TestSetJobListViewPersistsToConfigFile(t *testing.T) {
svc := newTempService(t, nil)
readConfig := func(stage string) domain.Config {
t.Helper()
data, err := os.ReadFile(svc.store.Paths.ConfigPath)
if err != nil {
t.Fatalf("reading config file %s: %v", stage, err)
}
var cfg domain.Config
if err := json.Unmarshal(data, &cfg); err != nil {
t.Fatalf("unmarshalling config %s: %v", stage, err)
}
return cfg
}
if err := svc.SetJobListView(domain.JobListViewCompact); err != nil {
t.Fatalf("SetJobListView(compact): %v", err)
}
if got := readConfig("after compact").JobListView; got != domain.JobListViewCompact {
t.Errorf("persisted JobListView = %q, want %q", got, domain.JobListViewCompact)
}
if err := svc.SetJobListView(domain.JobListViewDetailed); err != nil {
t.Fatalf("SetJobListView(detailed): %v", err)
}
if got := readConfig("after detailed").JobListView; got != domain.JobListViewDetailed {
t.Errorf("persisted JobListView = %q, want %q", got, domain.JobListViewDetailed)
}
}
// TestSetJobListViewNormalizesUnknownValue guards the config file against
// gaining a value no reader understands: anything but "compact" is stored as
// "detailed".
func TestSetJobListViewNormalizesUnknownValue(t *testing.T) {
svc := newTempService(t, nil)
if err := svc.SetJobListView(domain.JobListViewCompact); err != nil {
t.Fatalf("SetJobListView(compact): %v", err)
}
if err := svc.SetJobListView("tiny"); err != nil {
t.Fatalf("SetJobListView(tiny): %v", err)
}
data, err := os.ReadFile(svc.store.Paths.ConfigPath)
if err != nil {
t.Fatalf("reading config file: %v", err)
}
var cfg domain.Config
if err := json.Unmarshal(data, &cfg); err != nil {
t.Fatalf("unmarshalling config: %v", err)
}
if cfg.JobListView != domain.JobListViewDetailed {
t.Errorf("persisted JobListView = %q, want %q", cfg.JobListView, domain.JobListViewDetailed)
}
}
func TestServiceRebuiltFromPausedStoreStartsPaused(t *testing.T) {
jobs := []domain.Job{{ID: 1, Name: "A", Schedule: "@every 1m", Command: "echo", Enabled: true}}
svc := newTempService(t, jobs)
if err := svc.SetGlobalPause(true); err != nil {
t.Fatalf("SetGlobalPause: %v", err)
}
// Simulate a restart: NewService reads Config.Paused from the store that
// SetGlobalPause already updated (both in memory and on disk).
svc2 := NewService(svc.store, svc.Jobs())
var ran int32
runStarted := make(chan struct{}, 1)
svc2.runJob = func(context.Context, *domain.Job, string, string, time.Duration) (domain.RunRecord, error) {
atomic.AddInt32(&ran, 1)
select {
case runStarted <- struct{}{}:
default:
}
return domain.RunRecord{}, nil
}
// RunDue must not start any job while paused: the scheduler stays paused after
// a restart that rebuilt the service from a paused store.
svc2.RunDue(time.Now().Add(2 * time.Minute))
time.Sleep(50 * time.Millisecond)
if atomic.LoadInt32(&ran) != 0 {
t.Error("RunDue ran a job on a service rebuilt from a paused store")
}
// A manual RunNow is still allowed while paused — pause only stops the
// scheduler, not the user's explicit action.
if err := svc2.RunNow(1); err != nil {
t.Errorf("RunNow should be allowed while paused: %v", err)
}
select {
case <-runStarted:
case <-time.After(2 * time.Second):
t.Error("manual run was not started on a service rebuilt from a paused store")
}
}
src/app/platform.go
+18 -7
View File
@@ -1,37 +1,48 @@
package app package app
import ( import (
"fmt"
"gitea.mixdep.ru/mix/gosentry/src/platform/desktop" "gitea.mixdep.ru/mix/gosentry/src/platform/desktop"
) )
// InstallDesktopIcon installs the application's .desktop file and icon on // InstallDesktopIcon installs the application's .desktop file and icon on
// Linux (no-op on other platforms). The resulting icon path is stored in // Linux (no-op on other platforms). The resulting icon path is stored in
// store.Paths.DesktopIcon so ApplyAutostart can reference it. // store.Paths.DesktopIcon so ApplyAutostart can reference it. A failure is
// reported through ErrorOccurred rather than discarded, so the visible symptom
// (a generic dock icon) has an explanation in History instead of none.
func (s *Service) InstallDesktopIcon(appID string, iconBytes []byte) { func (s *Service) InstallDesktopIcon(appID string, iconBytes []byte) {
if iconPath, err := desktop.InstallDesktopIntegration(appID, s.store.Paths.ExecutablePath, iconBytes); err == nil { iconPath, err := desktop.InstallDesktopIntegration(appID, s.store.Paths.ExecutablePath, iconBytes)
s.store.Paths.DesktopIcon = iconPath if err != nil {
s.emit(ErrorOccurred{Err: fmt.Errorf("install desktop icon: %w", err)})
return
} }
s.mu.Lock()
s.store.Paths.DesktopIcon = iconPath
s.mu.Unlock()
} }
// AutostartStatus reports whether the platform autostart entry matches the // AutostartStatus reports whether the platform autostart entry matches the
// current StartOnLogin setting in the stored config. // current StartOnLogin and KeepRunningInTray settings in the stored config.
func (s *Service) AutostartStatus() (ok bool, message string) { func (s *Service) AutostartStatus() (ok bool, message string) {
s.mu.Lock() s.mu.Lock()
enabled := s.store.Config.StartOnLogin enabled := s.store.Config.StartOnLogin
startInTray := s.store.Config.KeepRunningInTray
execPath := s.store.Paths.ExecutablePath execPath := s.store.Paths.ExecutablePath
manager := s.manager manager := s.manager
s.mu.Unlock() s.mu.Unlock()
if manager == nil { if manager == nil {
return false, "autostart not available" return false, "autostart not available"
} }
return manager.Status(enabled, execPath) return manager.Status(enabled, startInTray, execPath)
} }
// ApplyAutostart writes or removes the platform autostart entry to match the // ApplyAutostart writes or removes the platform autostart entry to match the
// current StartOnLogin setting in the stored config. Call after UpdateSettings. // current StartOnLogin and KeepRunningInTray settings. Call after UpdateSettings.
func (s *Service) ApplyAutostart() error { func (s *Service) ApplyAutostart() error {
s.mu.Lock() s.mu.Lock()
enabled := s.store.Config.StartOnLogin enabled := s.store.Config.StartOnLogin
startInTray := s.store.Config.KeepRunningInTray
execPath := s.store.Paths.ExecutablePath execPath := s.store.Paths.ExecutablePath
iconPath := s.store.Paths.DesktopIcon iconPath := s.store.Paths.DesktopIcon
manager := s.manager manager := s.manager
@@ -39,5 +50,5 @@ func (s *Service) ApplyAutostart() error {
if manager == nil { if manager == nil {
return nil return nil
} }
return manager.Set(enabled, execPath, iconPath) return manager.Set(enabled, startInTray, execPath, iconPath)
} }
src/app/run.go
+113 -46
View File
@@ -11,8 +11,16 @@ import (
"gitea.mixdep.ru/mix/gosentry/src/runner" "gitea.mixdep.ru/mix/gosentry/src/runner"
) )
// RunNow starts a manual run of a job. It refuses to run while globally paused — // maxPendingRuns bounds how many missed occurrences the "queue" overlap policy
// the pause is an emergency stop for all execution — and will not start a job // will defer for one job. Without a ceiling a job whose runs take longer than
// its interval would queue one more occurrence on every tick forever, so once
// the cap is reached further overlaps are dropped exactly as the "skip" policy
// would drop them, until the backlog drains below the cap again.
const maxPendingRuns = 10
// RunNow starts a manual run of a job. Global pause stops only the scheduler's
// automatic runs (see RunDue), so a manual "Run now" is allowed even while
// paused — it is the user's explicit, one-off action. It will not start a job
// that is already running. In sequential execution mode it also refuses while // that is already running. In sequential execution mode it also refuses while
// any other job is running, so a manual run never breaks the one-at-a-time // any other job is running, so a manual run never breaks the one-at-a-time
// guarantee. The run itself happens on a background goroutine that records the // guarantee. The run itself happens on a background goroutine that records the
@@ -21,10 +29,6 @@ import (
// "Running" status), not the run's own outcome. // "Running" status), not the run's own outcome.
func (s *Service) RunNow(id int) error { func (s *Service) RunNow(id int) error {
s.mu.Lock() s.mu.Lock()
if s.paused {
s.mu.Unlock()
return errors.New("scheduler is paused")
}
job := s.findByIDLocked(id) job := s.findByIDLocked(id)
if job == nil { if job == nil {
s.mu.Unlock() s.mu.Unlock()
@@ -39,12 +43,12 @@ func (s *Service) RunNow(id int) error {
s.mu.Unlock() s.mu.Unlock()
return errors.New("another job is already running (sequential mode)") return errors.New("another job is already running (sequential mode)")
} }
err := s.startRunLocked(job, runtime, "Manual") s.startRunLocked(job, runtime, "Manual", time.Now())
s.mu.Unlock() s.mu.Unlock()
// Reflect the "Running" transition; the run's completion emits again later. // Reflect the "Running" transition; the run's completion emits again later.
s.emit(JobChanged{JobID: id}) s.emit(JobChanged{JobID: id})
return err return nil
} }
// RunDue is the scheduler's per-tick entry point: it starts whatever is due at // RunDue is the scheduler's per-tick entry point: it starts whatever is due at
@@ -58,16 +62,14 @@ func (s *Service) RunNow(id int) error {
// sequential mode a due job is left for a later tick while any other job is // sequential mode a due job is left for a later tick while any other job is
// running. The overlap policy decides what happens when a job comes due again // running. The overlap policy decides what happens when a job comes due again
// while its own previous run is still in flight: "skip" drops the new run, // while its own previous run is still in flight: "skip" drops the new run,
// "queue" marks it Pending so executeRun re-runs it the moment the current run // "queue" increments PendingRuns so executeRun drains missed occurrences after
// finishes. Either way NextDue is advanced past the fired occurrence so the same // the current run finishes. Either way NextDue is advanced past the fired occurrence so the same
// moment is not re-evaluated on every tick. // moment is not re-evaluated on every tick.
func (s *Service) RunDue(now time.Time) { func (s *Service) RunDue(now time.Time) {
s.mu.Lock() s.mu.Lock()
var started []int var started []int
var startErr error
if !s.paused { if !s.paused {
sequential := s.store.Config.ExecutionMode == domain.ExecutionModeSequential sequential := s.store.Config.ExecutionMode == domain.ExecutionModeSequential
queue := s.store.Config.OverlapPolicy == domain.OverlapPolicyQueue
running := s.anyRunningLocked() running := s.anyRunningLocked()
for index := range s.jobs { for index := range s.jobs {
job := &s.jobs[index] job := &s.jobs[index]
@@ -77,9 +79,10 @@ func (s *Service) RunDue(now time.Time) {
} }
if runtime.LastState == "Running" { if runtime.LastState == "Running" {
// The job came due again while its own run is still in flight. // The job came due again while its own run is still in flight.
// Apply the overlap policy and step past this occurrence. // Apply the effective overlap policy and step past this
if queue { // occurrence.
runtime.Pending = true if s.effectiveOverlapPolicy(job) == domain.OverlapPolicyQueue && runtime.PendingRuns < maxPendingRuns {
runtime.PendingRuns++
} }
s.advanceNextDueLocked(job, runtime, now) s.advanceNextDueLocked(job, runtime, now)
continue continue
@@ -89,79 +92,124 @@ func (s *Service) RunDue(now time.Time) {
// tick once the in-flight run has finished. // tick once the in-flight run has finished.
continue continue
} }
if err := s.startRunLocked(job, runtime, "Schedule"); err != nil { s.startRunLocked(job, runtime, "Schedule", now)
startErr = err
}
started = append(started, job.ID) started = append(started, job.ID)
running = true running = true
} }
} }
s.mu.Unlock() s.mu.Unlock()
if startErr != nil {
s.emit(ErrorOccurred{Err: fmt.Errorf("save jobs before scheduled run: %w", startErr)})
}
for _, id := range started { for _, id := range started {
s.emit(JobChanged{JobID: id}) s.emit(JobChanged{JobID: id})
} }
} }
// runEnv snapshots path and retention settings for one background run so
// executeRun does not read store.Paths or store.Config without holding mu.
type runEnv struct {
logsDir string
maxFiles int
maxAge int
timeout time.Duration
}
// startRunLocked transitions a job to "Running", advances its NextDue to the next // startRunLocked transitions a job to "Running", advances its NextDue to the next
// scheduled occurrence, persists that, and launches the run on a background // scheduled occurrence, and launches the run on a background goroutine. Neither
// goroutine. Advancing (rather than zeroing) NextDue keeps the schedule marching // step touches a durable field — both live on JobRuntime, which is never
// while the run is in flight, which is what lets RunDue notice a fresh occurrence // persisted — so there is nothing to save here. Advancing (rather than zeroing)
// firing during a long run and apply the overlap policy. The caller must hold mu. // NextDue keeps the schedule marching while the run is in flight, which is what
func (s *Service) startRunLocked(job *domain.Job, runtime *domain.JobRuntime, trigger string) error { // lets RunDue notice a fresh occurrence firing during a long run and apply the
// overlap policy. The caller must hold mu. now is the reference time for
// next-due advancement and the running placeholder.
func (s *Service) startRunLocked(job *domain.Job, runtime *domain.JobRuntime, trigger string, now time.Time) {
jobCopy := *job jobCopy := *job
runtime.LastState = "Running" runtime.LastState = "Running"
runtime.NextRun = "Running" runtime.NextRun = "Running"
runtime.Output = runningOutput(jobCopy, trigger, time.Now()) runtime.Output = runningOutput(jobCopy, trigger, now)
s.advanceNextDueLocked(job, runtime, time.Now()) s.advanceNextDueLocked(job, runtime, now)
err := s.store.SaveJobs(s.jobs) env := runEnv{
logsDir: s.store.Paths.LogsDir,
maxFiles: s.store.Config.MaxLogFiles,
maxAge: s.store.Config.MaxLogAgeDays,
timeout: s.effectiveTimeout(job),
}
// Capture ctx under the lock so a concurrent Start/Stop cannot swap it out // Capture ctx under the lock so a concurrent Start/Stop cannot swap it out
// from under the goroutine after we release mu. // from under the goroutine after we release mu.
go s.executeRun(s.ctx, jobCopy, trigger) go s.executeRun(s.ctx, jobCopy, trigger, env)
return err
} }
// executeRun runs the job off the lock, then records the result back through the // executeRun runs the job off the lock, then records the result back through the
// Service under the lock and announces it. If the job was marked Pending while // Service under the lock and announces it. If the job was marked Pending while
// running (the "queue" overlap policy), and it is still enabled and the scheduler // running (the "queue" overlap policy), and it is still enabled and the scheduler
// is not paused, the deferred run is started immediately. It runs on its own // is not paused, deferred runs are started one at a time until PendingRuns reaches
// goroutine. // zero. Each deferred run runs on its own goroutine.
func (s *Service) executeRun(ctx context.Context, jobCopy domain.Job, trigger string) { func (s *Service) executeRun(ctx context.Context, jobCopy domain.Job, trigger string, env runEnv) {
record := s.runJob(ctx, &jobCopy, trigger, s.store.Paths.LogsDir) record, logErr := s.runJob(ctx, &jobCopy, trigger, env.logsDir, env.timeout)
s.mu.Lock() s.mu.Lock()
var cleanupErr, saveErr error var rerunStarted bool
if current := s.findByIDLocked(jobCopy.ID); current != nil { if current := s.findByIDLocked(jobCopy.ID); current != nil {
runtime := s.runtimeForLocked(current) runtime := s.runtimeForLocked(current)
runtime.LastRun = record.Time runtime.LastRun = record.Time
runtime.LastState = record.State runtime.LastState = record.State
runtime.Output = record.Output runtime.Output = record.Output
prependLog(runtime, record) prependLog(runtime, record)
rerun := runtime.Pending && current.Enabled && !s.paused updateStats(runtime, record)
runtime.Pending = false rerun := runtime.PendingRuns > 0 && current.Enabled && !s.paused
if rerun { if rerun {
runtime.PendingRuns--
// A scheduled occurrence fired while this run was active under the // A scheduled occurrence fired while this run was active under the
// "queue" policy; start that deferred run now. // "queue" policy; start one deferred run now.
saveErr = s.startRunLocked(current, runtime, "Schedule") s.startRunLocked(current, runtime, "Schedule", time.Now())
rerunStarted = true
} else { } else {
s.refreshNextRunLocked(current, runtime) s.refreshNextRunLocked(current, runtime)
saveErr = s.store.SaveJobs(s.jobs)
} }
cleanupErr = runner.CleanupLogs(s.store.Paths.LogsDir, s.store.Config.MaxLogFiles, s.store.Config.MaxLogAgeDays)
} }
s.mu.Unlock() s.mu.Unlock()
// Cleanup is a directory scan plus up to MaxLogFiles unlinks. It needs only
// the values already snapshotted into runEnv, so it runs after mu is released
// rather than making every UI refresh wait behind it. It runs even when the
// job is gone, because the run still wrote a log file that retention covers.
cleanupErr := runner.CleanupLogs(env.logsDir, env.maxFiles, env.maxAge)
if logErr != nil {
s.emit(ErrorOccurred{Err: fmt.Errorf("write run log for %q: %w", jobCopy.Name, logErr)})
}
if cleanupErr != nil { if cleanupErr != nil {
s.emit(ErrorOccurred{Err: fmt.Errorf("log cleanup after run %q: %w", jobCopy.Name, cleanupErr)}) s.emit(ErrorOccurred{Err: fmt.Errorf("log cleanup after run %q: %w", jobCopy.Name, cleanupErr)})
} }
if saveErr != nil {
s.emit(ErrorOccurred{Err: fmt.Errorf("save jobs after run %q: %w", jobCopy.Name, saveErr)})
}
s.emit(RunRecorded{Record: record}) s.emit(RunRecorded{Record: record})
s.emit(JobChanged{JobID: jobCopy.ID}) if !rerunStarted {
s.emit(JobChanged{JobID: jobCopy.ID})
}
}
// effectiveOverlapPolicy resolves the overlap policy that actually governs a
// job: the job's own value when set, otherwise the global Config default. An
// empty Job.OverlapPolicy means "inherit the global default", which is why
// normalizeJobs leaves it empty rather than backfilling the configured value.
func (s *Service) effectiveOverlapPolicy(job *domain.Job) domain.OverlapPolicy {
if policy := domain.OverlapPolicy(strings.TrimSpace(job.OverlapPolicy)); policy != "" {
return policy
}
return s.store.Config.OverlapPolicy
}
// effectiveTimeout resolves the run timeout that actually governs a job: the
// job's own TimeoutSeconds whenever it is set — including an explicit 0, which
// means "no timeout" and deliberately does not inherit — otherwise the global
// Config.DefaultTimeoutSeconds. A nil Job.TimeoutSeconds means "inherit the
// global default", which is why normalizeJob leaves it nil rather than
// backfilling the configured value. A resolved duration of 0 means no timeout;
// runner.RunJob treats it as "run without a deadline". The caller must hold mu.
func (s *Service) effectiveTimeout(job *domain.Job) time.Duration {
secs := s.store.Config.DefaultTimeoutSeconds
if job.TimeoutSeconds != nil {
secs = *job.TimeoutSeconds
}
return time.Duration(secs) * time.Second
} }
// anyRunningLocked reports whether any loaded job is currently in the "Running" // anyRunningLocked reports whether any loaded job is currently in the "Running"
@@ -190,6 +238,25 @@ func (s *Service) advanceNextDueLocked(job *domain.Job, runtime *domain.JobRunti
runtime.NextDue = sched.Next(from) runtime.NextDue = sched.Next(from)
} }
// updateStats folds one completed RunRecord into the runtime's aggregate
// execution-time statistics. Called under mu inside executeRun.
func updateStats(rt *domain.JobRuntime, r domain.RunRecord) {
rt.RunCount++
if r.State == "Failed" {
rt.FailCount++
}
if r.DurationMS <= 0 {
return
}
rt.LastDurationMS = r.DurationMS
if r.DurationMS > rt.MaxDurationMS {
rt.MaxDurationMS = r.DurationMS
}
rt.TimedRunCount++
rt.DurationSumMS += r.DurationMS
rt.AvgDurationMS = rt.DurationSumMS / int64(rt.TimedRunCount)
}
// runningOutput is the placeholder output shown while a job is running, before // runningOutput is the placeholder output shown while a job is running, before
// the real command output replaces it. // the real command output replaces it.
func runningOutput(job domain.Job, trigger string, started time.Time) string { func runningOutput(job domain.Job, trigger string, started time.Time) string {
src/app/run_test.go
+364 -22
View File
@@ -68,6 +68,70 @@ func expectNoEntry(t *testing.T, entered <-chan int) {
} }
} }
// TestUpdateStats verifies that aggregate statistics are folded correctly after
// a sequence of fake runs with varying durations and states.
func TestUpdateStats(t *testing.T) {
rt := &domain.JobRuntime{}
// First run: success, 200 ms.
updateStats(rt, domain.RunRecord{State: "OK", DurationMS: 200})
if rt.RunCount != 1 || rt.FailCount != 0 {
t.Fatalf("after run 1: RunCount=%d FailCount=%d, want 1/0", rt.RunCount, rt.FailCount)
}
if rt.LastDurationMS != 200 || rt.MaxDurationMS != 200 || rt.AvgDurationMS != 200 {
t.Errorf("after run 1: last=%d max=%d avg=%d, want 200/200/200",
rt.LastDurationMS, rt.MaxDurationMS, rt.AvgDurationMS)
}
// Second run: failure, 400 ms.
updateStats(rt, domain.RunRecord{State: "Failed", DurationMS: 400})
if rt.RunCount != 2 || rt.FailCount != 1 {
t.Fatalf("after run 2: RunCount=%d FailCount=%d, want 2/1", rt.RunCount, rt.FailCount)
}
if rt.LastDurationMS != 400 || rt.MaxDurationMS != 400 {
t.Errorf("after run 2: last=%d max=%d, want 400/400", rt.LastDurationMS, rt.MaxDurationMS)
}
if rt.AvgDurationMS != 300 {
t.Errorf("after run 2: avg=%d, want 300", rt.AvgDurationMS)
}
// Third run: success, 100 ms — avg should be (200+400+100)/3 = 233.
updateStats(rt, domain.RunRecord{State: "OK", DurationMS: 100})
if rt.LastDurationMS != 100 || rt.MaxDurationMS != 400 {
t.Errorf("after run 3: last=%d max=%d, want 100/400", rt.LastDurationMS, rt.MaxDurationMS)
}
if rt.AvgDurationMS != 233 {
t.Errorf("after run 3: avg=%d, want 233", rt.AvgDurationMS)
}
// AvgDurationMS must always be exactly DurationSumMS/TimedRunCount — a stored
// sum divided once, not an incremental mean that truncates on every step and
// compounds error over a long-running job.
if rt.DurationSumMS != 700 {
t.Errorf("DurationSumMS = %d, want 700", rt.DurationSumMS)
}
if want := rt.DurationSumMS / int64(rt.TimedRunCount); rt.AvgDurationMS != want {
t.Errorf("AvgDurationMS = %d, want DurationSumMS/TimedRunCount = %d", rt.AvgDurationMS, want)
}
}
func TestUpdateStatsSkipsZeroDuration(t *testing.T) {
rt := &domain.JobRuntime{}
updateStats(rt, domain.RunRecord{State: "OK", DurationMS: 200})
updateStats(rt, domain.RunRecord{State: "OK", DurationMS: 0})
if rt.RunCount != 2 {
t.Fatalf("RunCount = %d, want 2", rt.RunCount)
}
if rt.TimedRunCount != 1 {
t.Fatalf("TimedRunCount = %d, want 1", rt.TimedRunCount)
}
if rt.AvgDurationMS != 200 {
t.Errorf("AvgDurationMS = %d, want 200 (zero-duration run excluded)", rt.AvgDurationMS)
}
if rt.LastDurationMS != 200 {
t.Errorf("LastDurationMS = %d, want 200", rt.LastDurationMS)
}
}
// TestRunDueParallelStartsAllDueJobs verifies that in parallel mode every due job // TestRunDueParallelStartsAllDueJobs verifies that in parallel mode every due job
// starts at once: both runs are in flight (blocked in the runner) before either // starts at once: both runs are in flight (blocked in the runner) before either
// is released. // is released.
@@ -79,10 +143,10 @@ func TestRunDueParallelStartsAllDueJobs(t *testing.T) {
entered := make(chan int, 2) entered := make(chan int, 2)
release := make(chan struct{}) release := make(chan struct{})
svc.runJob = func(_ context.Context, job *domain.Job, _ string, _ string) domain.RunRecord { svc.runJob = func(_ context.Context, job *domain.Job, _ string, _ string, _ time.Duration) (domain.RunRecord, error) {
entered <- job.ID entered <- job.ID
<-release <-release
return domain.RunRecord{Time: "t", JobID: job.ID, JobName: job.Name, State: "Success"} return domain.RunRecord{Time: "t", JobID: job.ID, JobName: job.Name, State: "Success"}, nil
} }
done := completions(svc) done := completions(svc)
@@ -120,10 +184,10 @@ func TestRunDueSequentialSerializes(t *testing.T) {
entered := make(chan int, 2) entered := make(chan int, 2)
release := make(chan struct{}) release := make(chan struct{})
svc.runJob = func(_ context.Context, job *domain.Job, _ string, _ string) domain.RunRecord { svc.runJob = func(_ context.Context, job *domain.Job, _ string, _ string, _ time.Duration) (domain.RunRecord, error) {
entered <- job.ID entered <- job.ID
<-release <-release
return domain.RunRecord{Time: "t", JobID: job.ID, JobName: job.Name, State: "Success"} return domain.RunRecord{Time: "t", JobID: job.ID, JobName: job.Name, State: "Success"}, nil
} }
done := completions(svc) done := completions(svc)
@@ -157,11 +221,11 @@ func TestRunDueSkipDropsOverlap(t *testing.T) {
entered := make(chan int, 2) entered := make(chan int, 2)
release := make(chan struct{}) release := make(chan struct{})
var calls int32 var calls int32
svc.runJob = func(_ context.Context, job *domain.Job, _ string, _ string) domain.RunRecord { svc.runJob = func(_ context.Context, job *domain.Job, _ string, _ string, _ time.Duration) (domain.RunRecord, error) {
atomic.AddInt32(&calls, 1) atomic.AddInt32(&calls, 1)
entered <- job.ID entered <- job.ID
<-release <-release
return domain.RunRecord{Time: "t", JobID: job.ID, JobName: job.Name, State: "Success"} return domain.RunRecord{Time: "t", JobID: job.ID, JobName: job.Name, State: "Success"}, nil
} }
done := completions(svc) done := completions(svc)
@@ -177,10 +241,10 @@ func TestRunDueSkipDropsOverlap(t *testing.T) {
expectNoEntry(t, entered) expectNoEntry(t, entered)
svc.mu.Lock() svc.mu.Lock()
pending := svc.runtimes[1].Pending pending := svc.runtimes[1].PendingRuns
svc.mu.Unlock() svc.mu.Unlock()
if pending { if pending != 0 {
t.Error("skip policy must not mark the job Pending") t.Error("skip policy must not queue deferred runs")
} }
close(release) close(release)
@@ -193,21 +257,25 @@ func TestRunDueSkipDropsOverlap(t *testing.T) {
} }
// TestRunDueQueueRerunsAfterFinish verifies that under the "queue" overlap policy a // TestRunDueQueueRerunsAfterFinish verifies that under the "queue" overlap policy a
// job coming due again while running is marked Pending and re-run as soon as the // job coming due again while running increments PendingRuns and re-runs after the
// in-flight run finishes. // in-flight run finishes.
func TestRunDueQueueRerunsAfterFinish(t *testing.T) { func TestRunDueQueueRerunsAfterFinish(t *testing.T) {
svc := newQueueService(t, domain.ExecutionModeParallel, domain.OverlapPolicyQueue, []domain.Job{ svc := newQueueService(t, domain.ExecutionModeParallel, domain.OverlapPolicyQueue, []domain.Job{
{ID: 1, Name: "A", Schedule: "@every 1h", Command: "echo", Enabled: true}, {ID: 1, Name: "A", Schedule: "@every 1h", Command: "echo", Enabled: true},
}) })
// Empty per-job OverlapPolicy inherits the global queue policy.
if svc.jobs[0].OverlapPolicy != "" {
t.Fatalf("test setup: job OverlapPolicy = %q, want empty (inherit)", svc.jobs[0].OverlapPolicy)
}
entered := make(chan int, 2) entered := make(chan int, 2)
release := make(chan struct{}) release := make(chan struct{})
var calls int32 var calls int32
svc.runJob = func(_ context.Context, job *domain.Job, _ string, _ string) domain.RunRecord { svc.runJob = func(_ context.Context, job *domain.Job, _ string, _ string, _ time.Duration) (domain.RunRecord, error) {
atomic.AddInt32(&calls, 1) atomic.AddInt32(&calls, 1)
entered <- job.ID entered <- job.ID
<-release <-release
return domain.RunRecord{Time: "t", JobID: job.ID, JobName: job.Name, State: "Success"} return domain.RunRecord{Time: "t", JobID: job.ID, JobName: job.Name, State: "Success"}, nil
} }
done := completions(svc) done := completions(svc)
@@ -217,17 +285,17 @@ func TestRunDueQueueRerunsAfterFinish(t *testing.T) {
t.Fatalf("started job = %d, want 1", id) t.Fatalf("started job = %d, want 1", id)
} }
// Re-due the running job and tick: queue must mark it Pending without starting // Re-due the running job and tick: queue must increment PendingRuns without
// a second concurrent run. // starting a second concurrent run.
primeDue(t, svc, 1) primeDue(t, svc, 1)
svc.RunDue(time.Now()) svc.RunDue(time.Now())
expectNoEntry(t, entered) expectNoEntry(t, entered)
svc.mu.Lock() svc.mu.Lock()
pending := svc.runtimes[1].Pending pending := svc.runtimes[1].PendingRuns
svc.mu.Unlock() svc.mu.Unlock()
if !pending { if pending != 1 {
t.Fatal("queue policy must mark the job Pending") t.Fatalf("queue policy must queue one deferred run, PendingRuns = %d", pending)
} }
// Releasing the first run lets executeRun start the deferred run automatically. // Releasing the first run lets executeRun start the deferred run automatically.
@@ -242,10 +310,192 @@ func TestRunDueQueueRerunsAfterFinish(t *testing.T) {
t.Errorf("runner called %d time(s), want 2 (original + queued re-run)", got) t.Errorf("runner called %d time(s), want 2 (original + queued re-run)", got)
} }
svc.mu.Lock() svc.mu.Lock()
pending = svc.runtimes[1].Pending pending = svc.runtimes[1].PendingRuns
svc.mu.Unlock() svc.mu.Unlock()
if pending { if pending != 0 {
t.Error("Pending must be cleared after the re-run starts") t.Errorf("PendingRuns must be cleared after the re-run starts, got %d", pending)
}
}
// TestRunDueQueueDrainsMultipleOverlaps verifies that each missed occurrence
// under the queue policy eventually runs after the in-flight run finishes.
func TestRunDueQueueDrainsMultipleOverlaps(t *testing.T) {
svc := newQueueService(t, domain.ExecutionModeParallel, domain.OverlapPolicyQueue, []domain.Job{
{ID: 1, Name: "A", Schedule: "@every 1h", Command: "echo", Enabled: true},
})
release := make(chan struct{})
var calls int32
svc.runJob = func(_ context.Context, job *domain.Job, _ string, _ string, _ time.Duration) (domain.RunRecord, error) {
if atomic.LoadInt32(&calls) == 0 {
<-release
}
atomic.AddInt32(&calls, 1)
return domain.RunRecord{Time: "t", JobID: job.ID, JobName: job.Name, State: "Success"}, nil
}
done := completions(svc)
primeDue(t, svc, 1)
svc.RunDue(time.Now())
// Three extra due ticks while the first run is still in flight.
for range 3 {
primeDue(t, svc, 1)
svc.RunDue(time.Now())
}
svc.mu.Lock()
pending := svc.runtimes[1].PendingRuns
svc.mu.Unlock()
if pending != 3 {
t.Fatalf("PendingRuns = %d, want 3 queued occurrences", pending)
}
close(release)
for range 4 {
waitRecord(t, done)
}
if got := atomic.LoadInt32(&calls); got != 4 {
t.Errorf("runner called %d time(s), want 4 (original + 3 queued)", got)
}
svc.mu.Lock()
pending = svc.runtimes[1].PendingRuns
svc.mu.Unlock()
if pending != 0 {
t.Errorf("PendingRuns = %d after drain, want 0", pending)
}
}
// TestRunDueQueueCapsPendingRuns verifies that a job whose runs never keep up
// with its schedule stops accumulating PendingRuns at maxPendingRuns instead of
// growing without bound.
func TestRunDueQueueCapsPendingRuns(t *testing.T) {
svc := newQueueService(t, domain.ExecutionModeParallel, domain.OverlapPolicyQueue, []domain.Job{
{ID: 1, Name: "A", Schedule: "@every 1h", Command: "echo", Enabled: true},
})
release := make(chan struct{})
svc.runJob = func(_ context.Context, job *domain.Job, _ string, _ string, _ time.Duration) (domain.RunRecord, error) {
<-release
return domain.RunRecord{Time: "t", JobID: job.ID, JobName: job.Name, State: "Success"}, nil
}
done := completions(svc)
t.Cleanup(func() {
close(release)
waitRecord(t, done)
})
primeDue(t, svc, 1)
svc.RunDue(time.Now())
// Far more due ticks than the cap while the first run stays in flight.
for range maxPendingRuns + 5 {
primeDue(t, svc, 1)
svc.RunDue(time.Now())
}
svc.mu.Lock()
pending := svc.runtimes[1].PendingRuns
svc.mu.Unlock()
if pending != maxPendingRuns {
t.Fatalf("PendingRuns = %d, want capped at %d", pending, maxPendingRuns)
}
}
// TestRunDuePerJobQueueOverridesGlobalSkip verifies that a job carrying its own
// "queue" policy queues a re-run even though the global default is "skip": the
// effective policy is resolved per job, so the job-level value wins.
func TestRunDuePerJobQueueOverridesGlobalSkip(t *testing.T) {
svc := newQueueService(t, domain.ExecutionModeParallel, domain.OverlapPolicySkip, []domain.Job{
{ID: 1, Name: "A", Schedule: "@every 1h", Command: "echo", Enabled: true, OverlapPolicy: string(domain.OverlapPolicyQueue)},
})
entered := make(chan int, 2)
release := make(chan struct{})
var calls int32
svc.runJob = func(_ context.Context, job *domain.Job, _ string, _ string, _ time.Duration) (domain.RunRecord, error) {
atomic.AddInt32(&calls, 1)
entered <- job.ID
<-release
return domain.RunRecord{Time: "t", JobID: job.ID, JobName: job.Name, State: "Success"}, nil
}
done := completions(svc)
primeDue(t, svc, 1)
svc.RunDue(time.Now())
if id := <-entered; id != 1 {
t.Fatalf("started job = %d, want 1", id)
}
// Re-due the running job and tick. Despite the global "skip", the job's own
// "queue" policy must mark it Pending.
primeDue(t, svc, 1)
svc.RunDue(time.Now())
expectNoEntry(t, entered)
svc.mu.Lock()
pending := svc.runtimes[1].PendingRuns
svc.mu.Unlock()
if pending != 1 {
t.Fatalf("per-job queue policy must queue a deferred run, PendingRuns = %d", pending)
}
// Releasing the first run lets executeRun start the deferred re-run.
close(release)
waitRecord(t, done)
if id := <-entered; id != 1 {
t.Fatalf("re-run job = %d, want 1", id)
}
waitRecord(t, done)
if got := atomic.LoadInt32(&calls); got != 2 {
t.Errorf("runner called %d time(s), want 2 (original + queued re-run)", got)
}
}
// TestRunDuePerJobSkipOverridesGlobalQueue verifies the reverse override: a job
// carrying its own "skip" policy drops an overlapping run even though the global
// default is "queue".
func TestRunDuePerJobSkipOverridesGlobalQueue(t *testing.T) {
svc := newQueueService(t, domain.ExecutionModeParallel, domain.OverlapPolicyQueue, []domain.Job{
{ID: 1, Name: "A", Schedule: "@every 1h", Command: "echo", Enabled: true, OverlapPolicy: string(domain.OverlapPolicySkip)},
})
entered := make(chan int, 2)
release := make(chan struct{})
var calls int32
svc.runJob = func(_ context.Context, job *domain.Job, _ string, _ string, _ time.Duration) (domain.RunRecord, error) {
atomic.AddInt32(&calls, 1)
entered <- job.ID
<-release
return domain.RunRecord{Time: "t", JobID: job.ID, JobName: job.Name, State: "Success"}, nil
}
done := completions(svc)
primeDue(t, svc, 1)
svc.RunDue(time.Now())
if id := <-entered; id != 1 {
t.Fatalf("started job = %d, want 1", id)
}
// Re-due the running job and tick. Despite the global "queue", the job's own
// "skip" policy must drop it without marking Pending.
primeDue(t, svc, 1)
svc.RunDue(time.Now())
expectNoEntry(t, entered)
svc.mu.Lock()
pending := svc.runtimes[1].PendingRuns
svc.mu.Unlock()
if pending != 0 {
t.Errorf("per-job skip policy must not queue deferred runs, PendingRuns = %d", pending)
}
close(release)
waitRecord(t, done)
expectNoEntry(t, entered)
if got := atomic.LoadInt32(&calls); got != 1 {
t.Errorf("runner called %d time(s), want 1", got)
} }
} }
@@ -259,10 +509,10 @@ func TestRunNowSequentialGuard(t *testing.T) {
entered := make(chan int, 2) entered := make(chan int, 2)
release := make(chan struct{}) release := make(chan struct{})
svc.runJob = func(_ context.Context, job *domain.Job, _ string, _ string) domain.RunRecord { svc.runJob = func(_ context.Context, job *domain.Job, _ string, _ string, _ time.Duration) (domain.RunRecord, error) {
entered <- job.ID entered <- job.ID
<-release <-release
return domain.RunRecord{Time: "t", JobID: job.ID, JobName: job.Name, State: "Success"} return domain.RunRecord{Time: "t", JobID: job.ID, JobName: job.Name, State: "Success"}, nil
} }
done := completions(svc) done := completions(svc)
@@ -286,3 +536,95 @@ func TestRunNowSequentialGuard(t *testing.T) {
} }
waitRecord(t, done) waitRecord(t, done)
} }
// TestRunDueQueueDrainSkippedWhenPaused verifies that queued overlap runs are not
// drained while the scheduler is globally paused, and that pausing clears the
// backlog rather than leaving it to fire a stale deferred run on resume.
func TestRunDueQueueDrainSkippedWhenPaused(t *testing.T) {
svc := newQueueService(t, domain.ExecutionModeParallel, domain.OverlapPolicyQueue, []domain.Job{
{ID: 1, Name: "A", Schedule: "@every 1h", Command: "echo", Enabled: true},
})
entered := make(chan int, 2)
release := make(chan struct{})
var calls int32
svc.runJob = func(_ context.Context, job *domain.Job, _ string, _ string, _ time.Duration) (domain.RunRecord, error) {
atomic.AddInt32(&calls, 1)
entered <- job.ID
<-release
return domain.RunRecord{Time: "t", JobID: job.ID, JobName: job.Name, State: "OK"}, nil
}
done := completions(svc)
primeDue(t, svc, 1)
svc.RunDue(time.Now())
if id := <-entered; id != 1 {
t.Fatalf("started job = %d, want 1", id)
}
primeDue(t, svc, 1)
svc.RunDue(time.Now())
expectNoEntry(t, entered)
svc.mu.Lock()
pending := svc.runtimes[1].PendingRuns
svc.mu.Unlock()
if pending != 1 {
t.Fatalf("expected one queued overlap, PendingRuns = %d", pending)
}
if err := svc.SetGlobalPause(true); err != nil {
t.Fatalf("SetGlobalPause: %v", err)
}
svc.mu.Lock()
pending = svc.runtimes[1].PendingRuns
svc.mu.Unlock()
if pending != 0 {
t.Errorf("pausing must clear a queued backlog, PendingRuns = %d, want 0", pending)
}
close(release)
waitRecord(t, done)
expectNoEntry(t, entered)
svc.mu.Lock()
pending = svc.runtimes[1].PendingRuns
svc.mu.Unlock()
if pending != 0 {
t.Errorf("paused scheduler must not drain queue, PendingRuns = %d, want 0", pending)
}
if got := atomic.LoadInt32(&calls); got != 1 {
t.Errorf("runner called %d time(s), want 1", got)
}
}
// TestEffectiveTimeout verifies the three-state resolution: an unset (nil)
// Job.TimeoutSeconds falls back to the global default, a positive value
// overrides it, and an explicit 0 means "no timeout" without inheriting.
func TestEffectiveTimeout(t *testing.T) {
svc := newTempService(t, nil)
svc.store.Config.DefaultTimeoutSeconds = 30
inherit := &domain.Job{TimeoutSeconds: nil}
if got, want := svc.effectiveTimeout(inherit), 30*time.Second; got != want {
t.Errorf("inherited timeout = %s, want %s", got, want)
}
own := &domain.Job{TimeoutSeconds: domain.TimeoutSecondsPtr(5)}
if got, want := svc.effectiveTimeout(own), 5*time.Second; got != want {
t.Errorf("per-job timeout = %s, want %s", got, want)
}
// An explicit per-job 0 must beat a positive global default rather than be
// mistaken for "unset".
none := &domain.Job{TimeoutSeconds: domain.TimeoutSecondsPtr(0)}
if got, want := svc.effectiveTimeout(none), time.Duration(0); got != want {
t.Errorf("explicit per-job zero timeout = %s, want %s (no timeout)", got, want)
}
svc.store.Config.DefaultTimeoutSeconds = 0
if got, want := svc.effectiveTimeout(inherit), time.Duration(0); got != want {
t.Errorf("inherited timeout with no global default = %s, want %s (no timeout)", got, want)
}
}
src/app/service.go
+105 -31
View File
@@ -18,22 +18,18 @@ import (
// to that state goes through a mutex so the GUI and the scheduler can no longer // to that state goes through a mutex so the GUI and the scheduler can no longer
// race on a shared *[]Job. // race on a shared *[]Job.
// //
// State ownership and the locking contract were established in T3.1; the // Mutations live in operations.go; scheduling and run dispatch live in run.go;
// event/observer machinery in T3.2. T3.3 added the state-mutating intents // typed events live in events.go. The scheduler is a thin timing loop that calls
// (CreateJob, UpdateJob, DeleteJob, SetEnabled, RunNow, SetGlobalPause, // RunDue on every tick and holds no job state of its own.
// UpdateSettings) in operations.go: the Service is the sole writer of job and
// runtime state, persisting through the store and announcing changes via events.
//
// T3.4 makes the Service drive scheduling too. It owns the timing loop through a
// scheduler.Scheduler that calls RunDue on every tick; the scheduler holds no
// job state and never touches the slice directly. The old shared *[]domain.Job
// between GUI and scheduler is gone — both go through the Service.
// //
// Locking contract: mu is a plain, non-reentrant mutex. Exported methods take // Locking contract: mu is a plain, non-reentrant mutex. Exported methods take
// it; unexported helpers ending in "Locked" assume the caller already holds it. // it; unexported helpers ending in "Locked" assume the caller already holds it.
// The Service must never call back into the UI (or any code that might re-enter // The Service must never call back into the UI (or any code that might re-enter
// the Service) while holding mu — in particular emit() is always called after // the Service) while holding mu — in particular emit() is always called after
// mu is released. // mu is released. Blocking file I/O follows the same rule: mu is the lock the
// Fyne main thread takes on every Jobs() and Runtime() call, so a JSON write, a
// log-directory scan, or a pass over every log header must not happen inside it
// (see deferSaveLocked, executeRun, and applySeededStatsLocked).
type Service struct { type Service struct {
mu sync.Mutex mu sync.Mutex
store *storage.Store store *storage.Store
@@ -51,7 +47,7 @@ type Service struct {
// processes. ctx is the lifecycle context passed to runs; Start replaces it // processes. ctx is the lifecycle context passed to runs; Start replaces it
// with a cancelable context so Stop can abort in-flight runs, and until Start // with a cancelable context so Stop can abort in-flight runs, and until Start
// it is context.Background(). // it is context.Background().
runJob func(ctx context.Context, job *domain.Job, trigger string, logsDir string) domain.RunRecord runJob func(ctx context.Context, job *domain.Job, trigger string, logsDir string, timeout time.Duration) (domain.RunRecord, error)
ctx context.Context ctx context.Context
// sched is the timing loop installed by Start; cancel tears down ctx on Stop. // sched is the timing loop installed by Start; cancel tears down ctx on Stop.
@@ -63,6 +59,13 @@ type Service struct {
// do not exercise autostart; Open() wires it via autostart.New(). // do not exercise autostart; Open() wires it via autostart.New().
manager autostart.Manager manager autostart.Manager
// saveMu serializes the store writes that operations prepare under mu and run
// after releasing it. It is taken while mu is still held and released once the
// write is done, so writes reach the file in the same order their snapshots
// were taken and an older snapshot can never land on top of a newer one.
// Nothing may take mu while holding saveMu.
saveMu sync.Mutex
// observers and their guard live in events.go. dispatchMu is separate from mu // observers and their guard live in events.go. dispatchMu is separate from mu
// so that emitting an event never requires (or is held under) the state lock: // so that emitting an event never requires (or is held under) the state lock:
// the Service must release mu before dispatching, per the locking contract. // the Service must release mu before dispatching, per the locking contract.
@@ -70,30 +73,86 @@ type Service struct {
observers []Observer observers []Observer
} }
// deferSaveLocked prepares the store writes for the caller to run after mu is
// released, and takes saveMu now so a later operation's write cannot overtake
// this one. The caller must hold mu, must unlock it before calling the returned
// function, and must call that function exactly once. Keeping the marshal, the
// fsync, and the rename out of the critical section is what stops a settings
// change or a job edit from blocking a scheduler tick or a finishing run. The
// writes run in the order given and stop at the first error.
func (s *Service) deferSaveLocked(writes ...func() error) func() error {
s.saveMu.Lock()
return func() error {
defer s.saveMu.Unlock()
for _, write := range writes {
if err := write(); err != nil {
return err
}
}
return nil
}
}
// NewService wires the Service to a loaded store and its jobs. It builds the // NewService wires the Service to a loaded store and its jobs. It builds the
// initial runtime map from the durable jobs so every job has transient state // initial runtime map from the durable jobs so every job has transient state
// from the moment the Service exists, and parses each job's schedule once. The // from the moment the Service exists, and parses each job's schedule once. The
// store is the Service's sole channel to persistence. // store is the Service's sole channel to persistence.
func NewService(store *storage.Store, jobs []domain.Job) *Service { func NewService(store *storage.Store, jobs []domain.Job) *Service {
s := &Service{ s := &Service{
store: store, store: store,
jobs: jobs, runJob: runner.RunJob,
runtimes: domain.NewRuntimes(jobs), ctx: context.Background(),
schedules: make(map[int]domain.Schedule, len(jobs)), paused: store.Config.Paused,
runJob: runner.RunJob,
ctx: context.Background(),
} }
// Parse every schedule once, then compute each job's first next-run so the // No lock is needed here: construction is single-threaded, before Start
// Service is ready to schedule the moment it exists — mirroring the old // launches the timing loop.
// scheduler's reset-on-construction. No lock is needed: construction is s.adoptJobsLocked(jobs)
// single-threaded, before Start launches the timing loop. s.applySeededStatsLocked(runner.SeedStats(store.Paths.LogsDir, s.jobs, store.Config.MaxLogFiles))
return s
}
// adoptJobsLocked makes jobs the Service's durable state and rebuilds everything
// derived from it: the runtime map, the parsed-schedule cache, and each job's
// first next-run — so the Service is ready to schedule the moment it exists,
// mirroring the old scheduler's reset-on-construction.
//
// It backs both construction and a Settings change that points at a different
// jobs file. Statistics seeded from existing log files are applied separately by
// applySeededStatsLocked, because reconstructing them is file I/O. The caller
// must hold mu.
func (s *Service) adoptJobsLocked(jobs []domain.Job) {
s.jobs = jobs
s.runtimes = domain.NewRuntimes(jobs)
s.schedules = make(map[int]domain.Schedule, len(jobs))
now := time.Now() now := time.Now()
for index := range s.jobs { for index := range s.jobs {
job := &s.jobs[index] job := &s.jobs[index]
s.parseScheduleLocked(job) s.parseScheduleLocked(job)
s.refreshNextRunFromLocked(job, s.runtimes[job.ID], now) s.refreshNextRunFromLocked(job, s.runtimes[job.ID], now)
} }
return s }
// applySeededStatsLocked folds statistics reconstructed from existing log files
// into the runtime map, so the details panel shows accumulated run history
// immediately rather than only runs since this process started. It is separate
// from adoptJobsLocked because producing the seeds opens every log file in the
// directory, which must not happen under mu: callers compute the map first and
// apply it here. The caller must hold mu.
func (s *Service) applySeededStatsLocked(seeds map[int]runner.SeededStats) {
for id, seed := range seeds {
runtime := s.runtimes[id]
if runtime == nil {
continue
}
runtime.RunCount = seed.RunCount
runtime.FailCount = seed.FailCount
runtime.LastDurationMS = seed.LastDurationMS
runtime.AvgDurationMS = seed.AvgDurationMS
runtime.MaxDurationMS = seed.MaxDurationMS
runtime.TimedRunCount = seed.TimedRunCount
runtime.DurationSumMS = seed.DurationSumMS
}
} }
// Start begins scheduling with the real wall clock. It is the production entry // Start begins scheduling with the real wall clock. It is the production entry
@@ -146,11 +205,27 @@ func Open() (*Service, error) {
return svc, nil return svc, nil
} }
// Store returns the underlying store. It is exposed so callers that still need // Config returns a copy of the current application configuration, safe to
// resolved paths and config (the GUI, during the transition) can reach them; // call from any goroutine. UpdateSettings, SetGlobalPause, and SetJobListView
// later phases narrow this surface. // are the only writers and all mutate store.Config under mu; copying under the
func (s *Service) Store() *storage.Store { // same lock is what keeps a UI read from racing them, instead of holding onto
return s.store // the *storage.Store this used to hand out (see STANDARDS: the UI reads
// Service state through typed events and accessors, never shared mutable
// state).
func (s *Service) Config() domain.Config {
s.mu.Lock()
defer s.mu.Unlock()
return s.store.Config
}
// Paths returns a copy of the store's resolved filesystem paths. AppDir and
// ConfigPath are fixed for the process; JobsPath, JobsDir, and LogsDir are
// re-derived under mu on every settings save (storage.Store.applyConfigPaths),
// so this copies under the same lock as Config for the same reason.
func (s *Service) Paths() storage.Paths {
s.mu.Lock()
defer s.mu.Unlock()
return s.store.Paths
} }
// Jobs returns a copy of the durable jobs slice. Returning a copy keeps callers // Jobs returns a copy of the durable jobs slice. Returning a copy keeps callers
@@ -167,9 +242,8 @@ func (s *Service) Jobs() []domain.Job {
// Runtime returns the transient runtime state for a job ID, or nil if no job // Runtime returns the transient runtime state for a job ID, or nil if no job
// with that ID is loaded. The returned pointer is the live runtime; reads of it // with that ID is loaded. The returned pointer is the live runtime; reads of it
// are only safe while no concurrent mutation is in flight. The scheduler now // are only safe while no concurrent mutation is in flight. The UI listener
// drives the Service rather than sharing state, so the remaining concurrent // marshals reads onto the main thread via fyne.Do.
// reader is the UI listener, which T4.1 marshals onto the main thread.
func (s *Service) Runtime(id int) *domain.JobRuntime { func (s *Service) Runtime(id int) *domain.JobRuntime {
s.mu.Lock() s.mu.Lock()
defer s.mu.Unlock() defer s.mu.Unlock()
src/app/service_test.go
-8
View File
@@ -47,11 +47,3 @@ func TestJobsReturnsCopy(t *testing.T) {
t.Errorf("Service state leaked through Jobs(): name = %q, want %q", again[0].Name, "Original") t.Errorf("Service state leaked through Jobs(): name = %q, want %q", again[0].Name, "Original")
} }
} }
func TestStoreReturnsWiredStore(t *testing.T) {
store := &storage.Store{}
svc := NewService(store, nil)
if svc.Store() != store {
t.Error("Store() did not return the wired store")
}
}
src/app/version.go
+1 -1
View File
@@ -3,4 +3,4 @@ package app
// Version is the application version shown in the GUI and used by build // Version is the application version shown in the GUI and used by build
// scripts in artifact names. It is a var rather than a const so release builds // scripts in artifact names. It is a var rather than a const so release builds
// can override it with Go ldflags when CI tags a build. // can override it with Go ldflags when CI tags a build.
var Version = "0.9.0" var Version = "1.0.3"
src/domain/config.go
+92 -1
View File
@@ -5,6 +5,23 @@ package domain
// launches omit this flag and open the normal window. // launches omit this flag and open the normal window.
const StartInTrayArgument = "--start-in-tray" const StartInTrayArgument = "--start-in-tray"
// AutostartArguments returns the command-line suffix written to a platform
// autostart entry when KeepRunningInTray is enabled. An empty string means the
// app should open its window normally after sign-in.
func AutostartArguments(keepInTray bool) string {
if keepInTray {
return StartInTrayArgument
}
return ""
}
// ResolveStartHidden reports whether an autostart launch should skip showing
// the main window. The CLI flag is ignored when KeepRunningInTray is off so a
// stale shortcut cannot hide the app with no tray icon to restore it.
func ResolveStartHidden(cliStartInTray, keepInTray bool) bool {
return cliStartInTray && keepInTray
}
// ExecutionMode controls whether due jobs run concurrently or one at a time. // ExecutionMode controls whether due jobs run concurrently or one at a time.
type ExecutionMode string type ExecutionMode string
@@ -15,6 +32,39 @@ const (
ExecutionModeSequential ExecutionMode = "sequential" ExecutionModeSequential ExecutionMode = "sequential"
) )
// Theme selects the application's visual appearance. It is a UI-only choice with
// no effect on scheduling; it is stored in Config so it persists across launches
// alongside the other desktop-shell preferences.
type Theme string
const (
// ThemeSystem keeps Fyne's built-in theme, following the platform look.
ThemeSystem Theme = "system"
// ThemeGoSentry applies the branded teal/amber theme derived from the logo
// and app icon.
ThemeGoSentry Theme = "gosentry"
)
// JobListView selects how densely the Jobs tab renders its sidebar list. Like
// Theme it is a UI-only choice with no effect on scheduling; it lives in Config
// so the user's preference survives a restart.
type JobListView string
const (
// JobListViewDetailed is the three-line row: name, metadata, status.
JobListViewDetailed JobListView = "detailed"
// JobListViewCompact is the one-line row: name on the left, status on the
// right, so many more jobs fit without scrolling.
JobListViewCompact JobListView = "compact"
)
// IsCompact reports whether the compact rendering is selected. Only the exact
// "compact" value counts, so empty, legacy, and unrecognised values all read as
// detailed — every consumer normalizes them the same way.
func (v JobListView) IsCompact() bool {
return v == JobListViewCompact
}
// OverlapPolicy decides what happens when a job's next run fires while the // OverlapPolicy decides what happens when a job's next run fires while the
// previous run is still active. // previous run is still active.
type OverlapPolicy string type OverlapPolicy string
@@ -31,7 +81,15 @@ const (
// application-level choices: where to read jobs from, where to write logs, and // application-level choices: where to read jobs from, where to write logs, and
// how the desktop shell should behave. // how the desktop shell should behave.
type Config struct { type Config struct {
JobsDir string `json:"jobs_dir"` // JobsFile is the full path of the JSON file holding the job definitions,
// file name included, so the user can keep jobs under any name they like. A
// relative path is resolved against the program folder.
JobsFile string `json:"jobs_file"`
// JobsDir is the pre-0.15 setting that named only the directory, with the
// file name fixed to jobs.json. It is still read so an older gosentry.json
// keeps working: storage.loadOrCreateConfig turns it into JobsFile and
// clears it, so the field disappears from the file on the next save.
JobsDir string `json:"jobs_dir,omitempty"`
LogsDir string `json:"logs_dir"` LogsDir string `json:"logs_dir"`
MaxLogFiles int `json:"max_log_files"` MaxLogFiles int `json:"max_log_files"`
MaxLogAgeDays int `json:"max_log_age_days"` MaxLogAgeDays int `json:"max_log_age_days"`
@@ -40,6 +98,39 @@ type Config struct {
NotifyOnFailure bool `json:"notify_on_failure,omitempty"` NotifyOnFailure bool `json:"notify_on_failure,omitempty"`
ExecutionMode ExecutionMode `json:"execution_mode,omitempty"` ExecutionMode ExecutionMode `json:"execution_mode,omitempty"`
OverlapPolicy OverlapPolicy `json:"overlap_policy,omitempty"` OverlapPolicy OverlapPolicy `json:"overlap_policy,omitempty"`
// DefaultTimeoutSeconds is the run timeout applied to jobs that leave their
// own Job.TimeoutSeconds unset. 0 (the default) means no timeout: such jobs
// run to completion however long that takes. It is written even when 0 —
// omitempty would hide a deliberate choice from the hand-editable config.
DefaultTimeoutSeconds int `json:"default_timeout_seconds"`
Paused bool `json:"paused,omitempty"`
// Theme selects the visual appearance. Empty is treated as ThemeGoSentry so
// configs written before this field existed pick up the branded look.
Theme Theme `json:"theme,omitempty"`
// JobListView selects the Jobs list density. Empty is treated as
// JobListViewDetailed so configs written before this field existed keep the
// current three-line rows.
JobListView JobListView `json:"job_list_view,omitempty"`
}
// DefaultConfig returns the built-in default settings. It is the config used
// when gosentry.json does not yet exist, and is also what the Settings UI
// offers to restore via its "Defaults" button.
func DefaultConfig() Config {
return Config{
JobsFile: "jobs.json",
LogsDir: "logs",
MaxLogFiles: 100,
MaxLogAgeDays: 30,
StartOnLogin: false,
KeepRunningInTray: true,
NotifyOnFailure: true,
ExecutionMode: ExecutionModeParallel,
OverlapPolicy: OverlapPolicySkip,
Theme: ThemeGoSentry,
JobListView: JobListViewDetailed,
DefaultTimeoutSeconds: 0,
}
} }
// JobsFile is the on-disk shape of jobs.json. Wrapping the slice in a top-level // JobsFile is the on-disk shape of jobs.json. Wrapping the slice in a top-level
src/domain/config_test.go
+49
View File
@@ -0,0 +1,49 @@
package domain
import "testing"
func TestAutostartArguments(t *testing.T) {
if got := AutostartArguments(true); got != StartInTrayArgument {
t.Errorf("AutostartArguments(true) = %q, want %q", got, StartInTrayArgument)
}
if got := AutostartArguments(false); got != "" {
t.Errorf("AutostartArguments(false) = %q, want empty", got)
}
}
func TestResolveStartHidden(t *testing.T) {
cases := []struct {
cli, keep, want bool
}{
{true, true, true},
{true, false, false},
{false, true, false},
{false, false, false},
}
for _, tc := range cases {
if got := ResolveStartHidden(tc.cli, tc.keep); got != tc.want {
t.Errorf("ResolveStartHidden(%v, %v) = %v, want %v", tc.cli, tc.keep, got, tc.want)
}
}
}
// TestJobListViewIsCompact pins the normalization rule: only the exact
// "compact" value selects the one-line rows, so empty and unrecognised values
// (including configs written before the field existed) keep the detailed look.
func TestJobListViewIsCompact(t *testing.T) {
cases := []struct {
view JobListView
want bool
}{
{JobListViewCompact, true},
{JobListViewDetailed, false},
{"", false},
{"Compact", false},
{"tiny", false},
}
for _, tc := range cases {
if got := tc.view.IsCompact(); got != tc.want {
t.Errorf("JobListView(%q).IsCompact() = %v, want %v", tc.view, got, tc.want)
}
}
}
src/domain/job.go
+24 -8
View File
@@ -6,12 +6,28 @@ package domain
// separate JobRuntime so the jobs file stays a clean, hand-editable record of // separate JobRuntime so the jobs file stays a clean, hand-editable record of
// configuration and never mixes in process-lifetime bookkeeping. // configuration and never mixes in process-lifetime bookkeeping.
type Job struct { type Job struct {
ID int `json:"id"` ID int `json:"id"`
Name string `json:"name"` Name string `json:"name"`
Folder string `json:"folder,omitempty"` Folder string `json:"folder,omitempty"`
Schedule string `json:"schedule"` Schedule string `json:"schedule"`
Command string `json:"command"` Command string `json:"command"`
Arguments string `json:"arguments,omitempty"` Arguments string `json:"arguments,omitempty"`
StartOnly bool `json:"start_only,omitempty"` StartOnly bool `json:"start_only,omitempty"`
Enabled bool `json:"enabled"` Enabled bool `json:"enabled"`
OverlapPolicy string `json:"overlap_policy,omitempty"`
// TimeoutSeconds bounds how long a run may take before it is killed. It is a
// pointer so the three states stay distinguishable on disk: absent (nil)
// means "inherit the global Config.DefaultTimeoutSeconds", mirroring
// OverlapPolicy's empty string; an explicit 0 means "no timeout" and does
// not inherit; a positive value is the per-job limit in seconds. The
// inherited global default may itself be 0, also meaning no timeout.
// normalizeJobs must leave nil untouched rather than backfilling a value.
TimeoutSeconds *int `json:"timeout_seconds,omitempty"`
}
// TimeoutSecondsPtr returns a pointer suitable for Job.TimeoutSeconds. It exists
// because nil (inherit) and an explicit 0 (no timeout) are different states, so
// callers cannot just assign an int.
func TimeoutSecondsPtr(seconds int) *int {
return &seconds
} }
src/domain/record.go
+9 -8
View File
@@ -4,12 +4,13 @@ package domain
// output is also written to a log file; the in-memory Output copy exists so the // output is also written to a log file; the in-memory Output copy exists so the
// latest run can be displayed without reopening the log on every repaint. // latest run can be displayed without reopening the log on every repaint.
type RunRecord struct { type RunRecord struct {
Time string `yaml:"time"` Time string
JobID int `yaml:"job_id"` JobID int
JobName string `yaml:"job_name"` JobName string
Trigger string `yaml:"trigger,omitempty"` Trigger string
State string `yaml:"state"` State string
Detail string `yaml:"detail"` Detail string
LogFile string `yaml:"log_file,omitempty"` LogFile string
Output string `yaml:"output,omitempty"` Output string
DurationMS int64
} }
src/domain/runtime.go
+26 -4
View File
@@ -3,7 +3,7 @@ package domain
import "time" import "time"
// JobRuntime is the transient execution state for a Job. It is never written to // JobRuntime is the transient execution state for a Job. It is never written to
// jobs.yaml: it is rebuilt from scratch each time GoSentry starts and is held in // jobs.json: it is rebuilt from scratch each time GoSentry starts and is held in
// memory keyed by Job.ID for the lifetime of the process. Keeping it separate // memory keyed by Job.ID for the lifetime of the process. Keeping it separate
// from Job is what lets the durable configuration file stay free of run records, // from Job is what lets the durable configuration file stay free of run records,
// status strings, and scheduling bookkeeping. // status strings, and scheduling bookkeeping.
@@ -19,9 +19,31 @@ type JobRuntime struct {
// the only form shown in the GUI. // the only form shown in the GUI.
NextDue time.Time NextDue time.Time
// Pending is set when a run was skipped due to the overlap policy being // PendingRuns counts scheduled occurrences that fired while a run was still
// "queue". The scheduler will start this job as soon as the current run ends. // in flight under the "queue" overlap policy. executeRun drains the counter
Pending bool // by starting one deferred run after each completion.
PendingRuns int
// Execution-time statistics accumulated since the last process start.
// Seeded from log files on startup; zero until then.
RunCount int
FailCount int
LastDurationMS int64
AvgDurationMS int64
MaxDurationMS int64
// TimedRunCount is the number of runs that contributed to AvgDurationMS.
// Runs with no recorded duration (legacy logs, or sub-millisecond StartOnly
// launches that round to 0) increment RunCount but not this. StartOnly runs
// otherwise contribute their launch latency.
TimedRunCount int
// DurationSumMS is the running total of every timed run's duration.
// AvgDurationMS is always DurationSumMS/TimedRunCount, computed fresh on each
// update rather than folded incrementally — an incremental integer mean
// truncates on every step, and the error compounds over the life of a job
// that keeps running. A stored sum divided once per update matches the exact
// sum/count average runner.aggregateLogStats computes when seeding from logs,
// so the two no longer disagree about the same run history.
DurationSumMS int64
} }
// NewRuntime builds the initial runtime state for a freshly loaded or created // NewRuntime builds the initial runtime state for a freshly loaded or created
src/platform/autostart/autostart.go
+5 -3
View File
@@ -3,7 +3,9 @@ package autostart
// Manager controls platform autostart for the application. // Manager controls platform autostart for the application.
type Manager interface { type Manager interface {
// Set writes or removes the platform autostart entry to match enabled. // Set writes or removes the platform autostart entry to match enabled.
Set(enabled bool, executablePath, iconPath string) error // When enabled, startInTray selects whether the entry passes --start-in-tray.
// Status reports whether the platform autostart entry matches expectedEnabled. Set(enabled, startInTray bool, executablePath, iconPath string) error
Status(expectedEnabled bool, executablePath string) (ok bool, message string) // Status reports whether the platform autostart entry matches expectedEnabled
// and startInTray.
Status(expectedEnabled, startInTray bool, executablePath string) (ok bool, message string)
} }
src/platform/autostart/autostart_linux.go
+20 -10
View File
@@ -17,17 +17,17 @@ type linuxManager struct{}
// New returns the Linux autostart Manager. // New returns the Linux autostart Manager.
func New() Manager { return linuxManager{} } func New() Manager { return linuxManager{} }
func (linuxManager) Set(enabled bool, executablePath, iconPath string) error { func (linuxManager) Set(enabled, startInTray bool, executablePath, iconPath string) error {
return SetAutostart(enabled, executablePath, iconPath) return setAutostart(enabled, startInTray, executablePath, iconPath)
} }
func (linuxManager) Status(expectedEnabled bool, executablePath string) (bool, string) { func (linuxManager) Status(expectedEnabled, startInTray bool, executablePath string) (bool, string) {
return AutostartStatus(expectedEnabled, executablePath) return autostartStatus(expectedEnabled, startInTray, executablePath)
} }
const autostartDesktopFileName = "gosentry.desktop" const autostartDesktopFileName = "gosentry.desktop"
func SetAutostart(enabled bool, executablePath string, iconPath string) error { func setAutostart(enabled bool, startInTray bool, executablePath string, iconPath string) error {
desktopPath, err := autostartDesktopPath() desktopPath, err := autostartDesktopPath()
if err != nil { if err != nil {
return err return err
@@ -36,15 +36,19 @@ func SetAutostart(enabled bool, executablePath string, iconPath string) error {
if err := os.MkdirAll(filepath.Dir(desktopPath), 0o755); err != nil { if err := os.MkdirAll(filepath.Dir(desktopPath), 0o755); err != nil {
return err return err
} }
execLine := quoteDesktopExec(executablePath)
if args := domain.AutostartArguments(startInTray); args != "" {
execLine += " " + args
}
desktopFile := fmt.Sprintf(`[Desktop Entry] desktopFile := fmt.Sprintf(`[Desktop Entry]
Type=Application Type=Application
Name=GoSentry Name=GoSentry
Comment=GoSentry desktop scheduler Comment=GoSentry desktop scheduler
Exec=%s %s Exec=%s
%s %s
Terminal=false Terminal=false
X-GNOME-Autostart-enabled=true X-GNOME-Autostart-enabled=true
`, quoteDesktopExec(executablePath), domain.StartInTrayArgument, desktopIconLine(iconPath)) `, execLine, desktopIconLine(iconPath))
return os.WriteFile(desktopPath, []byte(desktopFile), 0o644) return os.WriteFile(desktopPath, []byte(desktopFile), 0o644)
} }
@@ -54,7 +58,7 @@ X-GNOME-Autostart-enabled=true
return nil return nil
} }
func AutostartStatus(expectedEnabled bool, executablePath string) (bool, string) { func autostartStatus(expectedEnabled bool, startInTray bool, executablePath string) (bool, string) {
desktopPath, err := autostartDesktopPath() desktopPath, err := autostartDesktopPath()
if err != nil { if err != nil {
return false, "Cannot resolve XDG autostart directory" return false, "Cannot resolve XDG autostart directory"
@@ -70,9 +74,15 @@ func AutostartStatus(expectedEnabled bool, executablePath string) (bool, string)
if readErr != nil { if readErr != nil {
return false, "Autostart desktop entry is missing" return false, "Autostart desktop entry is missing"
} }
expectedExec := "Exec=" + quoteDesktopExec(executablePath) + " " + domain.StartInTrayArgument expectedExec := "Exec=" + quoteDesktopExec(executablePath)
if args := domain.AutostartArguments(startInTray); args != "" {
expectedExec += " " + args
}
if !strings.Contains(string(data), expectedExec) { if !strings.Contains(string(data), expectedExec) {
return false, "Autostart desktop entry points to another executable" if startInTray {
return false, "Autostart desktop entry does not start in tray"
}
return false, "Autostart desktop entry starts in tray while setting is off"
} }
return true, "Autostart is configured" return true, "Autostart is configured"
} }
src/platform/autostart/autostart_linux_test.go
+27 -1
View File
@@ -14,7 +14,7 @@ func TestLinuxAutostartStartsInTray(t *testing.T) {
t.Setenv("XDG_CONFIG_HOME", t.TempDir()) t.Setenv("XDG_CONFIG_HOME", t.TempDir())
executablePath := "/opt/Go Sentry/gosentry" executablePath := "/opt/Go Sentry/gosentry"
if err := SetAutostart(true, executablePath, "/opt/Go Sentry/gosentry.png"); err != nil { if err := setAutostart(true, true, executablePath, "/opt/Go Sentry/gosentry.png"); err != nil {
t.Fatalf("enable autostart: %v", err) t.Fatalf("enable autostart: %v", err)
} }
@@ -33,3 +33,29 @@ func TestLinuxAutostartStartsInTray(t *testing.T) {
} }
} }
func TestLinuxAutostartWithoutTrayFlag(t *testing.T) {
t.Setenv("XDG_CONFIG_HOME", t.TempDir())
executablePath := "/opt/Go Sentry/gosentry"
if err := setAutostart(true, false, executablePath, ""); err != nil {
t.Fatalf("enable autostart: %v", err)
}
desktopPath, err := autostartDesktopPath()
if err != nil {
t.Fatalf("resolve desktop path: %v", err)
}
data, err := os.ReadFile(desktopPath)
if err != nil {
t.Fatalf("read desktop entry: %v", err)
}
expectedExec := "Exec=" + quoteDesktopExec(executablePath)
if !strings.Contains(string(data), expectedExec) {
t.Fatalf("desktop entry should not include tray flag: %s", data)
}
if strings.Contains(string(data), domain.StartInTrayArgument) {
t.Fatalf("desktop entry must not pass --start-in-tray: %s", data)
}
}
src/platform/autostart/autostart_other.go
+6 -6
View File
@@ -9,22 +9,22 @@ type otherManager struct{}
// New returns the stub autostart Manager for unsupported platforms. // New returns the stub autostart Manager for unsupported platforms.
func New() Manager { return otherManager{} } func New() Manager { return otherManager{} }
func (otherManager) Set(enabled bool, executablePath, iconPath string) error { func (otherManager) Set(enabled, startInTray bool, executablePath, iconPath string) error {
return SetAutostart(enabled, executablePath, iconPath) return setAutostart(enabled, startInTray, executablePath, iconPath)
} }
func (otherManager) Status(expectedEnabled bool, executablePath string) (bool, string) { func (otherManager) Status(expectedEnabled, startInTray bool, executablePath string) (bool, string) {
return AutostartStatus(expectedEnabled, executablePath) return autostartStatus(expectedEnabled, startInTray, executablePath)
} }
func SetAutostart(enabled bool, executablePath string, iconPath string) error { func setAutostart(enabled bool, startInTray bool, executablePath string, iconPath string) error {
if !enabled { if !enabled {
return nil return nil
} }
return fmt.Errorf("autostart is not implemented for this platform") return fmt.Errorf("autostart is not implemented for this platform")
} }
func AutostartStatus(expectedEnabled bool, executablePath string) (bool, string) { func autostartStatus(expectedEnabled bool, startInTray bool, executablePath string) (bool, string) {
if !expectedEnabled { if !expectedEnabled {
return true, "Autostart is off" return true, "Autostart is off"
} }
src/platform/autostart/autostart_windows.go
+16 -12
View File
@@ -16,18 +16,18 @@ type windowsManager struct{}
// New returns the Windows autostart Manager. // New returns the Windows autostart Manager.
func New() Manager { return windowsManager{} } func New() Manager { return windowsManager{} }
func (windowsManager) Set(enabled bool, executablePath, iconPath string) error { func (windowsManager) Set(enabled, startInTray bool, executablePath, iconPath string) error {
return SetAutostart(enabled, executablePath, iconPath) return setAutostart(enabled, startInTray, executablePath, iconPath)
} }
func (windowsManager) Status(expectedEnabled bool, executablePath string) (bool, string) { func (windowsManager) Status(expectedEnabled, startInTray bool, executablePath string) (bool, string) {
return AutostartStatus(expectedEnabled, executablePath) return autostartStatus(expectedEnabled, startInTray, executablePath)
} }
const autostartName = "GoSentry" const autostartName = "GoSentry"
const startupShortcutFile = autostartName + ".lnk" const startupShortcutFile = autostartName + ".lnk"
func SetAutostart(enabled bool, executablePath string, iconPath string) error { func setAutostart(enabled bool, startInTray bool, executablePath string, iconPath string) error {
// Windows autostart used to write HKCU\Run values, but that approach became // Windows autostart used to write HKCU\Run values, but that approach became
// brittle once paths with spaces and the "--start-in-tray" argument entered // brittle once paths with spaces and the "--start-in-tray" argument entered
// the picture. A Startup-folder shortcut stores target path and arguments as // the picture. A Startup-folder shortcut stores target path and arguments as
@@ -39,12 +39,12 @@ func SetAutostart(enabled bool, executablePath string, iconPath string) error {
} }
if enabled { if enabled {
return createStartupShortcut(shortcutPath, executablePath, iconPath) return createStartupShortcut(shortcutPath, executablePath, iconPath, domain.AutostartArguments(startInTray))
} }
return removeIfExists(shortcutPath) return removeIfExists(shortcutPath)
} }
func AutostartStatus(expectedEnabled bool, executablePath string) (bool, string) { func autostartStatus(expectedEnabled bool, startInTray bool, executablePath string) (bool, string) {
shortcutPath, err := startupShortcutPath() shortcutPath, err := startupShortcutPath()
if err != nil { if err != nil {
return false, "Startup folder cannot be resolved" return false, "Startup folder cannot be resolved"
@@ -74,8 +74,12 @@ func AutostartStatus(expectedEnabled bool, executablePath string) (bool, string)
if !sameWindowsPath(actual, executablePath) { if !sameWindowsPath(actual, executablePath) {
return false, "Autostart shortcut points to another executable" return false, "Autostart shortcut points to another executable"
} }
if strings.TrimSpace(arguments) != domain.StartInTrayArgument { expectedArgs := domain.AutostartArguments(startInTray)
return false, "Autostart shortcut does not start in tray" if strings.TrimSpace(arguments) != expectedArgs {
if startInTray {
return false, "Autostart shortcut does not start in tray"
}
return false, "Autostart shortcut starts in tray while setting is off"
} }
return true, "Autostart is configured" return true, "Autostart is configured"
} }
@@ -88,7 +92,7 @@ func startupShortcutPath() (string, error) {
return filepath.Join(appData, "Microsoft", "Windows", "Start Menu", "Programs", "Startup", startupShortcutFile), nil return filepath.Join(appData, "Microsoft", "Windows", "Start Menu", "Programs", "Startup", startupShortcutFile), nil
} }
func createStartupShortcut(shortcutPath string, executablePath string, iconPath string) error { func createStartupShortcut(shortcutPath string, executablePath string, iconPath string, arguments string) error {
if err := os.MkdirAll(filepath.Dir(shortcutPath), 0755); err != nil { if err := os.MkdirAll(filepath.Dir(shortcutPath), 0755); err != nil {
return err return err
} }
@@ -106,7 +110,7 @@ func createStartupShortcut(shortcutPath string, executablePath string, iconPath
command.Env = append(os.Environ(), command.Env = append(os.Environ(),
"GOSENTRY_SHORTCUT_PATH="+shortcutPath, "GOSENTRY_SHORTCUT_PATH="+shortcutPath,
"GOSENTRY_TARGET_PATH="+executablePath, "GOSENTRY_TARGET_PATH="+executablePath,
"GOSENTRY_ARGUMENTS="+domain.StartInTrayArgument, "GOSENTRY_ARGUMENTS="+arguments,
"GOSENTRY_WORKING_DIRECTORY="+workingDirectory, "GOSENTRY_WORKING_DIRECTORY="+workingDirectory,
"GOSENTRY_ICON_PATH="+iconPath, "GOSENTRY_ICON_PATH="+iconPath,
) )
@@ -122,7 +126,7 @@ func readShortcut(shortcutPath string) (string, string, error) {
// OEM code page (e.g. CP866 on Russian Windows). Without this override, // OEM code page (e.g. CP866 on Russian Windows). Without this override,
// [Console]::Out.Write encodes Cyrillic and other non-ASCII characters as // [Console]::Out.Write encodes Cyrillic and other non-ASCII characters as
// OEM bytes; Go then reads them as UTF-8 and gets a different string from // OEM bytes; Go then reads them as UTF-8 and gets a different string from
// os.Executable, causing AutostartStatus to report "shortcut points to // os.Executable, causing autostartStatus to report "shortcut points to
// another executable" for any install path that contains non-ASCII chars. // another executable" for any install path that contains non-ASCII chars.
// New-Object System.Text.UTF8Encoding($false) is UTF-8 without BOM. // New-Object System.Text.UTF8Encoding($false) is UTF-8 without BOM.
script := `[Console]::OutputEncoding = New-Object System.Text.UTF8Encoding($false); $shell = New-Object -ComObject WScript.Shell; $shortcut = $shell.CreateShortcut($env:GOSENTRY_SHORTCUT_PATH); [Console]::Out.Write($shortcut.TargetPath + [Environment]::NewLine + $shortcut.Arguments)` script := `[Console]::OutputEncoding = New-Object System.Text.UTF8Encoding($false); $shell = New-Object -ComObject WScript.Shell; $shortcut = $shell.CreateShortcut($env:GOSENTRY_SHORTCUT_PATH); [Console]::Out.Write($shortcut.TargetPath + [Environment]::NewLine + $shortcut.Arguments)`
src/platform/autostart/autostart_windows_test.go
+48 -9
View File
@@ -12,14 +12,8 @@ import (
) )
func TestSameWindowsPathIgnoresCaseAndQuotes(t *testing.T) { func TestSameWindowsPathIgnoresCaseAndQuotes(t *testing.T) {
if !sameWindowsPath(`"D:\Apps\GoSentry\gosentry.exe"`, `d:\apps\gosentry\gosentry.exe`) {
t.Fatal("expected paths to match")
}
}
func TestSameWindowsPathHandlesSpaces(t *testing.T) {
if !sameWindowsPath(`"D:\Local Git\GoSentry\gosentry.exe"`, `d:\local git\gosentry\gosentry.exe`) { if !sameWindowsPath(`"D:\Local Git\GoSentry\gosentry.exe"`, `d:\local git\gosentry\gosentry.exe`) {
t.Fatal("expected paths with spaces to match") t.Fatal("expected paths to match")
} }
} }
@@ -88,7 +82,7 @@ func TestCreateStartupShortcutHandlesCyrillicPath(t *testing.T) {
t.Fatalf("create target file: %v", err) t.Fatalf("create target file: %v", err)
} }
if err := createStartupShortcut(shortcutPath, targetPath, ""); err != nil { if err := createStartupShortcut(shortcutPath, targetPath, "", domain.StartInTrayArgument); err != nil {
t.Fatalf("create shortcut: %v", err) t.Fatalf("create shortcut: %v", err)
} }
@@ -104,6 +98,51 @@ func TestCreateStartupShortcutHandlesCyrillicPath(t *testing.T) {
} }
} }
func TestCreateStartupShortcutWithoutTrayFlag(t *testing.T) {
tempDir := t.TempDir()
shortcutPath := filepath.Join(tempDir, "GoSentry.lnk")
targetPath := filepath.Join(tempDir, "gosentry.exe")
if err := os.WriteFile(targetPath, []byte("test"), 0644); err != nil {
t.Fatalf("create target file: %v", err)
}
if err := createStartupShortcut(shortcutPath, targetPath, "", ""); err != nil {
t.Fatalf("create shortcut: %v", err)
}
_, arguments, err := readShortcut(shortcutPath)
if err != nil {
t.Fatalf("read shortcut: %v", err)
}
if arguments != "" {
t.Fatalf("shortcut arguments mismatch: got %q want empty", arguments)
}
}
func TestAutostartStatusRequiresMatchingTrayFlag(t *testing.T) {
tempDir := t.TempDir()
t.Setenv("APPDATA", tempDir)
shortcutPath, err := startupShortcutPath()
if err != nil {
t.Fatalf("startupShortcutPath: %v", err)
}
targetPath := filepath.Join(tempDir, "gosentry.exe")
if err := os.WriteFile(targetPath, []byte("test"), 0644); err != nil {
t.Fatalf("create target: %v", err)
}
if err := createStartupShortcut(shortcutPath, targetPath, "", domain.StartInTrayArgument); err != nil {
t.Fatalf("create shortcut: %v", err)
}
ok, message := autostartStatus(true, false, targetPath)
if ok {
t.Fatalf("expected problem when tray flag mismatches, got OK: %s", message)
}
if message != "Autostart shortcut starts in tray while setting is off" {
t.Fatalf("unexpected message: %q", message)
}
}
func TestCreateStartupShortcutHandlesSpaces(t *testing.T) { func TestCreateStartupShortcutHandlesSpaces(t *testing.T) {
tempDir := t.TempDir() tempDir := t.TempDir()
shortcutPath := filepath.Join(tempDir, "GoSentry test.lnk") shortcutPath := filepath.Join(tempDir, "GoSentry test.lnk")
@@ -115,7 +154,7 @@ func TestCreateStartupShortcutHandlesSpaces(t *testing.T) {
t.Fatalf("create target file: %v", err) t.Fatalf("create target file: %v", err)
} }
if err := createStartupShortcut(shortcutPath, targetPath, ""); err != nil { if err := createStartupShortcut(shortcutPath, targetPath, "", domain.StartInTrayArgument); err != nil {
t.Fatalf("create shortcut: %v", err) t.Fatalf("create shortcut: %v", err)
} }
src/platform/desktop/desktop_linux_test.go
+62
View File
@@ -0,0 +1,62 @@
//go:build linux
package desktop
import (
"os"
"path/filepath"
"strings"
"testing"
)
func TestInstallDesktopIntegrationWritesDesktopAndIcon(t *testing.T) {
dataHome := t.TempDir()
t.Setenv("XDG_DATA_HOME", dataHome)
appID := "ru.mixeme.gosentry.desktop"
executable := filepath.Join(dataHome, "bin", "gosentry")
icon := []byte{0x89, 0x50, 0x4e, 0x47} // PNG magic prefix is enough for file presence
iconPath, err := InstallDesktopIntegration(appID, executable, icon)
if err != nil {
t.Fatalf("InstallDesktopIntegration: %v", err)
}
if _, err := os.Stat(iconPath); err != nil {
t.Fatalf("icon file: %v", err)
}
iconData, err := os.ReadFile(iconPath)
if err != nil {
t.Fatalf("read icon: %v", err)
}
if string(iconData) != string(icon) {
t.Fatalf("icon bytes mismatch")
}
desktopPath := filepath.Join(dataHome, "applications", appID+".desktop")
data, err := os.ReadFile(desktopPath)
if err != nil {
t.Fatalf("read desktop entry: %v", err)
}
text := string(data)
if !strings.Contains(text, "Name=GoSentry") {
t.Fatalf("desktop entry missing Name: %s", text)
}
if !strings.Contains(text, "StartupWMClass="+appID) {
t.Fatalf("desktop entry missing WM class: %s", text)
}
wantExec := "Exec=" + quoteDesktopExec(executable)
if !strings.Contains(text, wantExec) {
t.Fatalf("desktop entry exec = %s, want substring %q", text, wantExec)
}
if !strings.Contains(text, "Icon="+iconPath) {
t.Fatalf("desktop entry missing Icon path: %s", text)
}
}
func TestQuoteDesktopExecQuotesPath(t *testing.T) {
got := quoteDesktopExec("/opt/Go Sentry/gosentry")
if got != `"/opt/Go Sentry/gosentry"` {
t.Errorf("quoteDesktopExec = %q", got)
}
}
src/platform/filemanager/filemanager.go
+42
View File
@@ -0,0 +1,42 @@
// Package filemanager opens a directory in the desktop file manager, so the
// UI can reveal a configured folder (logs, jobs) without knowing which handler
// the platform uses.
package filemanager
import (
"errors"
"fmt"
"os"
"os/exec"
"runtime"
)
// Open shows dir in the platform file manager. A missing path, a path that is
// not a directory, and a handler that fails to start are all returned as
// errors so the caller can surface them instead of appearing to do nothing.
func Open(dir string) error {
info, err := os.Stat(dir)
if errors.Is(err, os.ErrNotExist) {
return fmt.Errorf("folder does not exist: %s", dir)
}
if err != nil {
return err
}
if !info.IsDir() {
return fmt.Errorf("not a folder: %s", dir)
}
name, args := openCommand(dir)
if name == "" {
return fmt.Errorf("opening a folder is not supported on %s", runtime.GOOS)
}
command := exec.Command(name, args...)
if err := command.Start(); err != nil {
return err
}
// The handler hands the request to the desktop shell and exits on its own —
// Windows Explorer even exits non-zero after opening the window — so its
// status carries no information. Wait runs only to release the process
// handle, and never blocks the caller.
go func() { _ = command.Wait() }()
return nil
}
src/platform/filemanager/filemanager_linux.go
+9
View File
@@ -0,0 +1,9 @@
//go:build linux
package filemanager
// openCommand returns the XDG invocation for dir. xdg-open picks whichever
// file manager the desktop environment has registered for directories.
func openCommand(dir string) (string, []string) {
return "xdg-open", []string{dir}
}
src/platform/filemanager/filemanager_other.go
+10
View File
@@ -0,0 +1,10 @@
//go:build !windows && !linux
package filemanager
// openCommand has no handler to name on platforms GoSentry does not ship for.
// An empty name makes Open report that the action is unavailable instead of
// running something arbitrary.
func openCommand(dir string) (string, []string) {
return "", nil
}
src/platform/filemanager/filemanager_test.go
+67
View File
@@ -0,0 +1,67 @@
package filemanager
import (
"os"
"path/filepath"
"runtime"
"strings"
"testing"
)
// The success path is deliberately not tested: it would pop a real file
// manager window on the machine running the suite. Only the guards that keep
// Open from launching anything are exercised here.
func TestOpenRejectsMissingFolder(t *testing.T) {
missing := filepath.Join(t.TempDir(), "no-such-folder")
err := Open(missing)
if err == nil {
t.Fatal("Open on a missing folder returned nil, want an error")
}
if !strings.Contains(err.Error(), missing) {
t.Errorf("error %q does not name the missing folder %q", err, missing)
}
}
func TestOpenRejectsFile(t *testing.T) {
file := filepath.Join(t.TempDir(), "gosentry.log")
if err := os.WriteFile(file, []byte("log"), 0o644); err != nil {
t.Fatalf("write test file: %v", err)
}
err := Open(file)
if err == nil {
t.Fatal("Open on a file returned nil, want an error")
}
if !strings.Contains(err.Error(), "not a folder") {
t.Errorf("error %q does not report that the path is not a folder", err)
}
}
// TestOpenCommandNamesPlatformHandler checks the supported platforms name a
// handler (an empty name makes Open report the action as unavailable) and that
// the directory is passed as a single argument, so spaces need no quoting.
func TestOpenCommandNamesPlatformHandler(t *testing.T) {
dir := filepath.Join(t.TempDir(), "log files")
name, args := openCommand(dir)
switch runtime.GOOS {
case "windows":
if name != "explorer" {
t.Errorf("handler on windows = %q, want %q", name, "explorer")
}
case "linux":
if name != "xdg-open" {
t.Errorf("handler on linux = %q, want %q", name, "xdg-open")
}
default:
if name != "" {
t.Errorf("handler on %s = %q, want no handler", runtime.GOOS, name)
}
return
}
if len(args) != 1 || args[0] != filepath.Clean(dir) {
t.Errorf("arguments = %q, want the single path %q", args, filepath.Clean(dir))
}
}
src/platform/filemanager/filemanager_windows.go
+10
View File
@@ -0,0 +1,10 @@
package filemanager
import "path/filepath"
// openCommand returns the Explorer invocation for dir. The path is cleaned
// because Explorer ignores an argument that mixes separators, and it is passed
// as a single argument so spaces need no quoting.
func openCommand(dir string) (string, []string) {
return "explorer", []string{filepath.Clean(dir)}
}
src/runner/cleanup.go
+5
View File
@@ -9,6 +9,11 @@ import (
"time" "time"
) )
// CleanupLogs enforces the count and age retention policies on the .log files
// in logsDir. maxFiles <= 0 disables the count policy and maxAgeDays <= 0
// disables the age policy, independently — "keep everything" is a value the
// user can choose in Settings, not just an internal default (STANDARDS
// §Intentional behavior).
func CleanupLogs(logsDir string, maxFiles int, maxAgeDays int) error { func CleanupLogs(logsDir string, maxFiles int, maxAgeDays int) error {
entries, err := os.ReadDir(logsDir) entries, err := os.ReadDir(logsDir)
if err != nil { if err != nil {
src/runner/cleanup_test.go
-16
View File
@@ -50,22 +50,6 @@ func TestCleanupLogsRemovesFilesPastMaxAge(t *testing.T) {
} }
} }
func TestCleanupLogsKeepsFilesWithinAgeLimit(t *testing.T) {
dir := t.TempDir()
for i := 1; i <= 3; i++ {
path := writeLogFile(t, dir, fmt.Sprintf("job_%d.log", i))
setModTime(t, path, time.Duration(i)*24*time.Hour)
}
if err := CleanupLogs(dir, 100, 30); err != nil {
t.Fatal(err)
}
entries, _ := os.ReadDir(dir)
if len(entries) != 3 {
t.Errorf("expected 3 files kept within age limit, got %d", len(entries))
}
}
// TestCleanupLogsByCountDeletesOldest verifies the count-based policy: when more // TestCleanupLogsByCountDeletesOldest verifies the count-based policy: when more
// than maxFiles log files exist the oldest (by modification time) are removed. // than maxFiles log files exist the oldest (by modification time) are removed.
// maxAgeDays=0 disables age-based cleanup so the test exercises count only. // maxAgeDays=0 disables age-based cleanup so the test exercises count only.
src/runner/invocation.go
-2
View File
@@ -64,5 +64,3 @@ func LogArguments(arguments string) string {
} }
return strings.ReplaceAll(strings.TrimSpace(arguments), "\r\n", "\n") return strings.ReplaceAll(strings.TrimSpace(arguments), "\r\n", "\n")
} }
func logArguments(arguments string) string { return LogArguments(arguments) }
src/runner/invocation_windows.go
+37 -10
View File
@@ -6,6 +6,7 @@ import (
"strings" "strings"
"syscall" "syscall"
"unicode" "unicode"
"unicode/utf8"
) )
func shellCommand(ctx context.Context, command string) *exec.Cmd { func shellCommand(ctx context.Context, command string) *exec.Cmd {
@@ -32,19 +33,45 @@ func quoteLeadingWindowsProgramPath(command string) string {
} }
lower := strings.ToLower(trimmed) lower := strings.ToLower(trimmed)
pathEnd := -1
for _, extension := range []string{".exe", ".cmd", ".bat", ".com"} { for _, extension := range []string{".exe", ".cmd", ".bat", ".com"} {
index := strings.Index(lower, extension) end := earliestBoundedExtensionEnd(lower, extension)
if index < 0 { if end >= 0 && (pathEnd < 0 || end < pathEnd) {
continue pathEnd = end
} }
pathEnd := index + len(extension)
programPath := trimmed[:pathEnd]
if !strings.ContainsFunc(programPath, unicode.IsSpace) {
return command
}
return leadingWhitespace + `"` + programPath + `"` + trimmed[pathEnd:]
} }
return command if pathEnd < 0 {
return command
}
programPath := trimmed[:pathEnd]
if !strings.ContainsFunc(programPath, unicode.IsSpace) {
return command
}
return leadingWhitespace + `"` + programPath + `"` + trimmed[pathEnd:]
}
// earliestBoundedExtensionEnd returns the offset just past the first
// occurrence of extension in s that ends at a token boundary (end of string
// or whitespace), or -1 if none does. Scanning left to right and rejecting
// unbounded matches keeps a trailing "...\App.exe" inside an argument, such
// as "run.bat C:\tool.exe", from being mistaken for the program path.
func earliestBoundedExtensionEnd(s, extension string) int {
offset := 0
for {
index := strings.Index(s[offset:], extension)
if index < 0 {
return -1
}
end := offset + index + len(extension)
if end == len(s) {
return end
}
r, _ := utf8.DecodeRuneInString(s[end:])
if unicode.IsSpace(r) {
return end
}
offset += index + 1
}
} }
func startsWithWindowsRootedPath(command string) bool { func startsWithWindowsRootedPath(command string) bool {
src/runner/logfile.go
+68 -9
View File
@@ -1,6 +1,7 @@
package runner package runner
import ( import (
"errors"
"fmt" "fmt"
"os" "os"
"path/filepath" "path/filepath"
@@ -11,24 +12,82 @@ import (
"gitea.mixdep.ru/mix/gosentry/src/domain" "gitea.mixdep.ru/mix/gosentry/src/domain"
) )
func writeRunLog(logsDir string, job domain.Job, trigger string, state string, detail string, output string, started time.Time) string { func writeRunLog(logsDir string, job domain.Job, trigger string, state string, detail string, output string, durationMS int64, started time.Time) (string, error) {
if strings.TrimSpace(logsDir) == "" { if strings.TrimSpace(logsDir) == "" {
return "" return "", errors.New("logs directory is empty")
} }
if err := os.MkdirAll(logsDir, 0o755); err != nil { if err := os.MkdirAll(logsDir, 0o755); err != nil {
return "" return "", fmt.Errorf("create logs directory: %w", err)
} }
// The timestamp comes first so a plain directory listing is naturally sorted // The timestamp comes first so a plain directory listing is naturally sorted
// by run time. The job name is included for human scanning, but sanitized to // by run time. The job name is included for human scanning, but sanitized to
// avoid characters that are invalid on Windows or awkward on shells. // avoid characters that are invalid on Windows or awkward on shells.
fileName := started.Format("20060102-150405") + "_" + sanitizeFileName(job.Name) + ".log" fileName := started.Format("20060102-150405") + "_" + sanitizeFileName(job.Name) + ".log"
path := filepath.Join(logsDir, fileName) path := uniqueLogPath(logsDir, fileName)
content := fmt.Sprintf("time: %s\njob_id: %d\njob_name: %s\ntrigger: %s\nstate: %s\ndetail: %s\ncommand: %s\narguments: %s\nstart_only: %t\n\n%s\n", content := fmt.Sprintf("time: %s\njob_id: %d\njob_name: %s\ntrigger: %s\nstate: %s\ndetail: %s\nduration: %d\ncommand: %s\narguments: %s\nstart_only: %t\n\n%s\n",
started.Format("2006-01-02 15:04:05"), job.ID, job.Name, trigger, state, detail, job.Command, logArguments(job.Arguments), job.StartOnly, output) started.Format("2006-01-02 15:04:05"), job.ID, job.Name, trigger, state, detail, durationMS, job.Command, LogArguments(job.Arguments), job.StartOnly, output)
if err := os.WriteFile(path, []byte(content), 0o644); err != nil { if err := writeFileAtomic(logsDir, path, []byte(content), 0o644); err != nil {
return "" return "", fmt.Errorf("write log file: %w", err)
}
return path, nil
}
// writeFileAtomic writes data to a temp file in dir, then renames it over
// path. Rename is atomic within a volume on both supported platforms, so a
// crash or a killed process mid-write can never leave path holding a
// truncated log file the way a direct os.WriteFile could.
func writeFileAtomic(dir, path string, data []byte, perm os.FileMode) error {
tmp, err := os.CreateTemp(dir, filepath.Base(path)+".tmp*")
if err != nil {
return err
}
tmpPath := tmp.Name()
success := false
defer func() {
if !success {
os.Remove(tmpPath)
}
}()
if _, err := tmp.Write(data); err != nil {
tmp.Close()
return err
}
if err := tmp.Sync(); err != nil {
tmp.Close()
return err
}
if err := tmp.Close(); err != nil {
return err
}
if err := os.Chmod(tmpPath, perm); err != nil {
return err
}
if err := os.Rename(tmpPath, path); err != nil {
return err
}
success = true
return nil
}
// uniqueLogPath returns a path for fileName in dir, appending a disambiguating
// "-2", "-3", … suffix before the extension if the plain name is already
// taken. Two runs of the same job in the same second — a fast manual re-run,
// or a sub-second queue drain — would otherwise share one timestamp and the
// second write would silently overwrite the first.
func uniqueLogPath(dir, fileName string) string {
path := filepath.Join(dir, fileName)
if _, err := os.Stat(path); err != nil {
return path
}
ext := filepath.Ext(fileName)
base := strings.TrimSuffix(fileName, ext)
for n := 2; ; n++ {
candidate := filepath.Join(dir, fmt.Sprintf("%s-%d%s", base, n, ext))
if _, err := os.Stat(candidate); err != nil {
return candidate
}
} }
return path
} }
func sanitizeFileName(name string) string { func sanitizeFileName(name string) string {
src/runner/logfile_test.go
+36
View File
@@ -0,0 +1,36 @@
package runner
import (
"os"
"path/filepath"
"testing"
)
// TestUniqueLogPathAvoidsCollision pins the fix for two runs of the same job
// landing on the same second: without disambiguation the second write would
// silently overwrite the first.
func TestUniqueLogPathAvoidsCollision(t *testing.T) {
dir := t.TempDir()
const name = "20260101-120000_job.log"
first := uniqueLogPath(dir, name)
if first != filepath.Join(dir, name) {
t.Fatalf("first call: got %q, want the plain name", first)
}
if err := os.WriteFile(first, []byte("one"), 0o644); err != nil {
t.Fatal(err)
}
second := uniqueLogPath(dir, name)
if second == first {
t.Fatalf("second call returned the same path as an existing file: %q", second)
}
if err := os.WriteFile(second, []byte("two"), 0o644); err != nil {
t.Fatal(err)
}
third := uniqueLogPath(dir, name)
if third == first || third == second {
t.Fatalf("third call collided with an existing file: %q (existing: %q, %q)", third, first, second)
}
}
src/runner/runner.go
+46 -25
View File
@@ -12,24 +12,42 @@ import (
"gitea.mixdep.ru/mix/gosentry/src/platform/winproc" "gitea.mixdep.ru/mix/gosentry/src/platform/winproc"
) )
const commandTimeout = 30 * time.Second
const commandWaitDelay = 2 * time.Second const commandWaitDelay = 2 * time.Second
func RunJob(ctx context.Context, job *domain.Job, trigger string, logsDir string) domain.RunRecord { func RunJob(ctx context.Context, job *domain.Job, trigger string, logsDir string, timeout time.Duration) (domain.RunRecord, error) {
started := time.Now() started := time.Now()
// Commands can hang forever if a script waits for input or a child process // Commands can hang forever if a script waits for input or a child process
// stalls. A fixed timeout is a conservative first guardrail for a desktop // stalls. The effective timeout is resolved by the caller (per-job value or
// scheduler; later it can become a per-job setting without changing the // the global default), keeping the runner ignorant of the global config. A
// runner contract. // non-positive timeout means "no timeout": context.WithTimeout(ctx, 0) would
runCtx, cancel := context.WithTimeout(ctx, commandTimeout) // expire immediately, so fall back to a plain cancelable context that only
// ever ends via ctx (e.g. app shutdown).
var runCtx context.Context
var cancel context.CancelFunc
if timeout > 0 {
runCtx, cancel = context.WithTimeout(ctx, timeout)
} else {
runCtx, cancel = context.WithCancel(ctx)
}
defer cancel() defer cancel()
var output string var output string
var state string var state string
var detail string var detail string
var durationMS int64
if job.StartOnly { if job.StartOnly {
// A StartOnly process is deliberately never waited for, so it must not be
// tied to any cancelable context: exec.CommandContext leaves a watcher
// goroutine alive until Wait returns or the context is done, and since
// StartOnly never calls Wait that goroutine would live for the rest of the
// process — one per run — and then try to kill a process whose handle
// startJobOnly has already released. context.Background() has a nil Done
// channel, so os/exec starts no watcher at all and the started process is
// left to outlive GoSentry, which is the point of the option.
invocation := jobInvocation(context.Background(), *job) invocation := jobInvocation(context.Background(), *job)
state, detail, output = startJobOnly(invocation, *job, started) // StartOnly jobs don't wait for process exit, so the duration measures
// launch latency (time to spawn the process) rather than run time.
state, detail, output, durationMS = startJobOnly(invocation, *job, started)
} else { } else {
var stdoutBuf strings.Builder var stdoutBuf strings.Builder
var stderrBuf strings.Builder var stderrBuf strings.Builder
@@ -44,44 +62,47 @@ func RunJob(ctx context.Context, job *domain.Job, trigger string, logsDir string
err := command.Run() err := command.Run()
duration := time.Since(started).Round(time.Millisecond) duration := time.Since(started).Round(time.Millisecond)
durationMS = duration.Milliseconds()
output = formatOutput(stdoutBuf.String(), stderrBuf.String()) output = formatOutput(stdoutBuf.String(), stderrBuf.String())
state, detail = runStateDetail(err, runCtx.Err(), duration) state, detail = runStateDetail(err, runCtx.Err(), duration, timeout)
} }
now := time.Now() now := time.Now()
timestamp := now.Format("2006-01-02 15:04:05") timestamp := now.Format("2006-01-02 15:04:05")
logFile := writeRunLog(logsDir, *job, trigger, state, detail, output, now) logFile, logErr := writeRunLog(logsDir, *job, trigger, state, detail, output, durationMS, now)
// The runner is now pure with respect to the job: it returns a RunRecord and // The runner is now pure with respect to the job: it returns a RunRecord and
// lets the caller fold that record into the job's JobRuntime. Run state no // lets the caller fold that record into the job's JobRuntime. Run state no
// longer lives on Job, so there is nothing on the job to mutate here. // longer lives on Job, so there is nothing on the job to mutate here.
return domain.RunRecord{ return domain.RunRecord{
Time: timestamp, Time: timestamp,
JobID: job.ID, JobID: job.ID,
JobName: job.Name, JobName: job.Name,
Trigger: trigger, Trigger: trigger,
State: state, State: state,
Detail: detail, Detail: detail,
LogFile: logFile, LogFile: logFile,
Output: output, Output: output,
} DurationMS: durationMS,
}, logErr
} }
func startJobOnly(invocation commandInvocation, job domain.Job, started time.Time) (string, string, string) { func startJobOnly(invocation commandInvocation, job domain.Job, started time.Time) (string, string, string, int64) {
command := invocation.command command := invocation.command
if invocation.hideWindow { if invocation.hideWindow {
winproc.ConfigureHiddenWindow(command) winproc.ConfigureHiddenWindow(command)
} }
err := command.Start() err := command.Start()
duration := time.Since(started).Round(time.Millisecond) duration := time.Since(started).Round(time.Millisecond)
durationMS := duration.Milliseconds()
if err != nil { if err != nil {
return "Failed", fmt.Sprintf("%T: %v", err, err), startOnlyOutput(job, 0) return "Failed", fmt.Sprintf("%T: %v", err, err), startOnlyOutput(job, 0), durationMS
} }
pid := command.Process.Pid pid := command.Process.Pid
if releaseErr := command.Process.Release(); releaseErr != nil { if releaseErr := command.Process.Release(); releaseErr != nil {
return "Failed", fmt.Sprintf("process started with pid %d, but release failed: %T: %v", pid, releaseErr, releaseErr), startOnlyOutput(job, pid) return "Failed", fmt.Sprintf("process started with pid %d, but release failed: %T: %v", pid, releaseErr, releaseErr), startOnlyOutput(job, pid), durationMS
} }
return "OK", fmt.Sprintf("Started in %s (pid %d); not waiting for process exit", duration, pid), startOnlyOutput(job, pid) return "OK", fmt.Sprintf("Started in %s (pid %d); not waiting for process exit", duration, pid), startOnlyOutput(job, pid), durationMS
} }
func startOnlyOutput(job domain.Job, pid int) string { func startOnlyOutput(job domain.Job, pid int) string {
@@ -95,17 +116,17 @@ func startOnlyOutput(job domain.Job, pid int) string {
builder.WriteString("command:\n") builder.WriteString("command:\n")
builder.WriteString(job.Command + "\n\n") builder.WriteString(job.Command + "\n\n")
builder.WriteString("arguments:\n") builder.WriteString("arguments:\n")
builder.WriteString(logArguments(job.Arguments)) builder.WriteString(LogArguments(job.Arguments))
builder.WriteString("\n\nstart_only:\ntrue") builder.WriteString("\n\nstart_only:\ntrue")
return builder.String() return builder.String()
} }
func runStateDetail(err error, runErr error, duration time.Duration) (string, string) { func runStateDetail(err error, runErr error, duration time.Duration, timeout time.Duration) (string, string) {
if err == nil { if err == nil {
return "OK", fmt.Sprintf("Completed in %s (exit code 0)", duration) return "OK", fmt.Sprintf("Completed in %s (exit code 0)", duration)
} }
if errors.Is(runErr, context.DeadlineExceeded) { if errors.Is(runErr, context.DeadlineExceeded) {
return "Failed", fmt.Sprintf("Timed out after %s", commandTimeout) return "Failed", fmt.Sprintf("Timed out after %s", timeout)
} }
if errors.Is(err, exec.ErrWaitDelay) { if errors.Is(err, exec.ErrWaitDelay) {
return "OK", fmt.Sprintf("Completed; output capture stopped after %s because a child process kept the stream open", commandWaitDelay) return "OK", fmt.Sprintf("Completed; output capture stopped after %s because a child process kept the stream open", commandWaitDelay)
src/runner/runner_test.go
+149 -47
View File
@@ -10,7 +10,6 @@ import (
"time" "time"
"gitea.mixdep.ru/mix/gosentry/src/domain" "gitea.mixdep.ru/mix/gosentry/src/domain"
"gitea.mixdep.ru/mix/gosentry/src/platform/winproc"
) )
func echoCommand(message string) string { func echoCommand(message string) string {
@@ -28,7 +27,10 @@ func TestRunJobLogFileAllHeaders(t *testing.T) {
Command: echoCommand("header test output"), Command: echoCommand("header test output"),
} }
record := RunJob(context.Background(), &job, "Schedule", logsDir) record, err := RunJob(context.Background(), &job, "Schedule", logsDir, 30*time.Second)
if err != nil {
t.Fatal(err)
}
if record.LogFile == "" { if record.LogFile == "" {
t.Fatal("expected log file to be written") t.Fatal("expected log file to be written")
} }
@@ -75,7 +77,10 @@ func TestRunJobRecordFields(t *testing.T) {
Command: echoCommand("record field check"), Command: echoCommand("record field check"),
} }
record := RunJob(context.Background(), &job, "Schedule", t.TempDir()) record, err := RunJob(context.Background(), &job, "Schedule", t.TempDir(), 30*time.Second)
if err != nil {
t.Fatal(err)
}
if record.JobID != job.ID { if record.JobID != job.ID {
t.Errorf("JobID: got %d, want %d", record.JobID, job.ID) t.Errorf("JobID: got %d, want %d", record.JobID, job.ID)
@@ -130,8 +135,8 @@ func TestLogArguments(t *testing.T) {
{"--flag\n--value", "--flag\n--value"}, {"--flag\n--value", "--flag\n--value"},
} }
for _, tc := range cases { for _, tc := range cases {
if got := logArguments(tc.input); got != tc.want { if got := LogArguments(tc.input); got != tc.want {
t.Errorf("logArguments(%q) = %q, want %q", tc.input, got, tc.want) t.Errorf("LogArguments(%q) = %q, want %q", tc.input, got, tc.want)
} }
} }
} }
@@ -159,7 +164,10 @@ func TestRunJobWritesLogFile(t *testing.T) {
Command: echoCommand("hello from test"), Command: echoCommand("hello from test"),
} }
record := RunJob(context.Background(), &job, "Manual", logsDir) record, err := RunJob(context.Background(), &job, "Manual", logsDir, 30*time.Second)
if err != nil {
t.Fatal(err)
}
if record.LogFile == "" { if record.LogFile == "" {
t.Fatal("expected log file path") t.Fatal("expected log file path")
} }
@@ -194,7 +202,10 @@ func TestRunJobRunsQuotedWindowsExecutable(t *testing.T) {
Command: `"C:\Windows\System32\cmd.exe" /C echo quoted command ok`, Command: `"C:\Windows\System32\cmd.exe" /C echo quoted command ok`,
} }
record := RunJob(context.Background(), &job, "Manual", logsDir) record, err := RunJob(context.Background(), &job, "Manual", logsDir, 30*time.Second)
if err != nil {
t.Fatal(err)
}
if record.State != "OK" { if record.State != "OK" {
t.Fatalf("expected quoted command to run, got state %q detail %q output:\n%s", record.State, record.Detail, record.Output) t.Fatalf("expected quoted command to run, got state %q detail %q output:\n%s", record.State, record.Detail, record.Output)
} }
@@ -223,7 +234,10 @@ func TestRunJobRunsUnquotedWindowsProgramPathWithSpaces(t *testing.T) {
Command: scriptPath, Command: scriptPath,
} }
record := RunJob(context.Background(), &job, "Manual", logsDir) record, err := RunJob(context.Background(), &job, "Manual", logsDir, 30*time.Second)
if err != nil {
t.Fatal(err)
}
if record.State != "OK" { if record.State != "OK" {
t.Fatalf("expected unquoted command path to run, got state %q detail %q output:\n%s", record.State, record.Detail, record.Output) t.Fatalf("expected unquoted command path to run, got state %q detail %q output:\n%s", record.State, record.Detail, record.Output)
} }
@@ -245,7 +259,10 @@ func TestRunJobRunsWindowsCommandWithSeparateArguments(t *testing.T) {
Arguments: "/C\necho separate arguments ok", Arguments: "/C\necho separate arguments ok",
} }
record := RunJob(context.Background(), &job, "Manual", logsDir) record, err := RunJob(context.Background(), &job, "Manual", logsDir, 30*time.Second)
if err != nil {
t.Fatal(err)
}
if record.State != "OK" { if record.State != "OK" {
t.Fatalf("expected separate arguments to run, got state %q detail %q output:\n%s", record.State, record.Detail, record.Output) t.Fatalf("expected separate arguments to run, got state %q detail %q output:\n%s", record.State, record.Detail, record.Output)
} }
@@ -268,7 +285,10 @@ func TestRunJobFailsOnNonZeroExitCode(t *testing.T) {
job.Arguments = "/C\nexit /b 1" job.Arguments = "/C\nexit /b 1"
} }
record := RunJob(context.Background(), &job, "Manual", t.TempDir()) record, err := RunJob(context.Background(), &job, "Manual", t.TempDir(), 30*time.Second)
if err != nil {
t.Fatal(err)
}
if record.State != "Failed" { if record.State != "Failed" {
t.Fatalf("expected non-zero exit code to fail, got state %q detail %q", record.State, record.Detail) t.Fatalf("expected non-zero exit code to fail, got state %q detail %q", record.State, record.Detail)
} }
@@ -292,7 +312,10 @@ func TestRunJobStartOnlyDoesNotWaitForExitCode(t *testing.T) {
StartOnly: true, StartOnly: true,
} }
record := RunJob(context.Background(), &job, "Manual", t.TempDir()) record, err := RunJob(context.Background(), &job, "Manual", t.TempDir(), 30*time.Second)
if err != nil {
t.Fatal(err)
}
if record.State != "OK" { if record.State != "OK" {
t.Fatalf("expected start-only job to be OK after launch, got state %q detail %q", record.State, record.Detail) t.Fatalf("expected start-only job to be OK after launch, got state %q detail %q", record.State, record.Detail)
} }
@@ -313,7 +336,10 @@ func TestRunJobStartOnlyReportsStartFailure(t *testing.T) {
StartOnly: true, StartOnly: true,
} }
record := RunJob(context.Background(), &job, "Manual", t.TempDir()) record, err := RunJob(context.Background(), &job, "Manual", t.TempDir(), 30*time.Second)
if err != nil {
t.Fatal(err)
}
if record.State != "Failed" { if record.State != "Failed" {
t.Fatalf("expected missing start-only command to fail, got state %q detail %q", record.State, record.Detail) t.Fatalf("expected missing start-only command to fail, got state %q detail %q", record.State, record.Detail)
} }
@@ -322,60 +348,136 @@ func TestRunJobStartOnlyReportsStartFailure(t *testing.T) {
} }
} }
func TestDirectCommandDoesNotHideWindow(t *testing.T) { func TestRunJobTimesOut(t *testing.T) {
if runtime.GOOS != "windows" { command := "sh"
t.Skip("Windows window visibility only") arguments := "-c\nsleep 5"
if runtime.GOOS == "windows" {
command = `C:\Windows\System32\cmd.exe`
// timeout waits ~5s; ping to localhost is a portable stall on hosts where
// timeout refuses to run without an interactive console.
arguments = "/C\nping -n 6 127.0.0.1 >NUL"
}
job := domain.Job{
ID: 50,
Name: "Timeout Test",
Command: command,
Arguments: arguments,
} }
invocation := jobInvocation(context.Background(), domain.Job{ record, err := RunJob(context.Background(), &job, "Manual", t.TempDir(), 100*time.Millisecond)
Command: `C:\Windows\System32\cmd.exe`, if err != nil {
Arguments: "/C\necho visible direct process", t.Fatal(err)
}) }
if invocation.hideWindow { if record.State != "Failed" {
t.Fatal("direct command should not request hidden startup window") t.Fatalf("expected timed-out job to fail, got state %q detail %q", record.State, record.Detail)
}
if !strings.Contains(record.Detail, "Timed out after 100ms") {
t.Fatalf("expected timeout detail with the effective timeout, got %q", record.Detail)
} }
} }
func TestShellCommandHidesWindow(t *testing.T) { func TestRunJobZeroTimeoutMeansNoTimeout(t *testing.T) {
if runtime.GOOS != "windows" { command := "sh"
t.Skip("Windows window visibility only") arguments := "-c\nsleep 0.2"
if runtime.GOOS == "windows" {
command = `C:\Windows\System32\cmd.exe`
arguments = "/C\nping -n 2 127.0.0.1 >NUL"
}
job := domain.Job{
ID: 52,
Name: "No Timeout Test",
Command: command,
Arguments: arguments,
} }
invocation := jobInvocation(context.Background(), domain.Job{Command: "echo hidden shell process"}) // A non-positive timeout must not expire immediately (context.WithTimeout
if !invocation.hideWindow { // with a zero duration would); the job must run to completion.
t.Fatal("shell command should request hidden startup window") record, err := RunJob(context.Background(), &job, "Manual", t.TempDir(), 0)
if err != nil {
t.Fatal(err)
} }
winproc.ConfigureHiddenWindow(invocation.command) if record.State != "OK" {
if invocation.command.SysProcAttr == nil || !invocation.command.SysProcAttr.HideWindow { t.Fatalf("expected job with no timeout to complete OK, got state %q detail %q", record.State, record.Detail)
t.Fatal("expected shell command to be hidden")
} }
} }
func TestShellCommandUsesWindowsSafeQuoting(t *testing.T) { // A StartOnly run must not leave a watcher goroutine behind. exec.CommandContext
if runtime.GOOS != "windows" { // keeps one alive until Wait returns or the context is done, and StartOnly never
t.Skip("Windows cmd.exe quoting only") // waits, so binding it to the caller's cancelable context would leak one
// goroutine per run for the lifetime of the app — and then, on shutdown, kill a
// process whose handle startJobOnly has already released.
func TestRunJobStartOnlyLeavesNoContextWatcher(t *testing.T) {
command := "sh"
arguments := "-c\nexit 0"
if runtime.GOOS == "windows" {
command = `C:\Windows\System32\cmd.exe`
arguments = "/C\nexit /b 0"
}
job := domain.Job{
ID: 53,
Name: "Start Only Goroutines",
Command: command,
Arguments: arguments,
StartOnly: true,
} }
command := shellCommand(context.Background(), `"C:\Program Files\FreeFileSync\FreeFileSync.exe" "D:\Local\Programs\FreeFileSync\Jobs\Auto.ffs_batch"`) ctx, cancel := context.WithCancel(context.Background())
winproc.ConfigureHiddenWindow(command) defer cancel()
want := `cmd.exe /S /C ""C:\Program Files\FreeFileSync\FreeFileSync.exe" "D:\Local\Programs\FreeFileSync\Jobs\Auto.ffs_batch""` const runs = 5
if command.SysProcAttr == nil { before := settledGoroutines()
t.Fatal("expected SysProcAttr") for i := 0; i < runs; i++ {
if _, err := RunJob(ctx, &job, "Manual", t.TempDir(), 30*time.Second); err != nil {
t.Fatal(err)
}
} }
if command.SysProcAttr.CmdLine != want { // Counted before cancel on purpose: a watcher would still be parked on
t.Fatalf("expected command line %q, got %q", want, command.SysProcAttr.CmdLine) // ctx.Done() at this point, and cancelling first would release it.
if leaked := settledGoroutines() - before; leaked > 1 {
t.Errorf("%d goroutines left after %d StartOnly runs, want none tied to the run context", leaked, runs)
} }
} }
func TestWindowsShellCommandLineQuotesUnquotedProgramPath(t *testing.T) { // settledGoroutines returns the goroutine count once it has stopped falling, so
if runtime.GOOS != "windows" { // a goroutine that is still on its way out is not mistaken for a leak.
t.Skip("Windows cmd.exe quoting only") func settledGoroutines() int {
lowest := runtime.NumGoroutine()
for stable, i := 0, 0; stable < 3 && i < 100; i++ {
time.Sleep(10 * time.Millisecond)
if count := runtime.NumGoroutine(); count < lowest {
lowest, stable = count, 0
continue
}
stable++
}
return lowest
}
func TestRunJobStartOnlyIgnoresTimeout(t *testing.T) {
command := "sh"
arguments := "-c\nsleep 5"
if runtime.GOOS == "windows" {
command = `C:\Windows\System32\cmd.exe`
arguments = "/C\nping -n 6 127.0.0.1 >NUL"
}
job := domain.Job{
ID: 51,
Name: "Start Only Timeout",
Command: command,
Arguments: arguments,
StartOnly: true,
} }
got := windowsShellCommandLine(`C:\Program Files\Joplin\Joplin.exe --profile "D:\Joplin Profile"`) // A tiny run timeout must not affect StartOnly jobs: they never wait on the
want := `cmd.exe /S /C ""C:\Program Files\Joplin\Joplin.exe" --profile "D:\Joplin Profile""` // timed run context, so the launch succeeds regardless.
if got != want { record, err := RunJob(context.Background(), &job, "Manual", t.TempDir(), time.Millisecond)
t.Fatalf("expected command line %q, got %q", want, got) if err != nil {
t.Fatal(err)
}
if record.State != "OK" {
t.Fatalf("expected start-only job to be OK despite tiny timeout, got state %q detail %q", record.State, record.Detail)
}
if !strings.Contains(record.Detail, "not waiting for process exit") {
t.Fatalf("expected start-only detail, got %q", record.Detail)
} }
} }
src/runner/runner_windows_test.go
+94
View File
@@ -0,0 +1,94 @@
//go:build windows
package runner
import (
"context"
"testing"
"gitea.mixdep.ru/mix/gosentry/src/domain"
"gitea.mixdep.ru/mix/gosentry/src/platform/winproc"
)
func TestDirectCommandDoesNotHideWindow(t *testing.T) {
invocation := jobInvocation(context.Background(), domain.Job{
Command: `C:\Windows\System32\cmd.exe`,
Arguments: "/C\necho visible direct process",
})
if invocation.hideWindow {
t.Fatal("direct command should not request hidden startup window")
}
}
func TestShellCommandHidesWindow(t *testing.T) {
invocation := jobInvocation(context.Background(), domain.Job{Command: "echo hidden shell process"})
if !invocation.hideWindow {
t.Fatal("shell command should request hidden startup window")
}
winproc.ConfigureHiddenWindow(invocation.command)
if invocation.command.SysProcAttr == nil || !invocation.command.SysProcAttr.HideWindow {
t.Fatal("expected shell command to be hidden")
}
}
func TestShellCommandUsesWindowsSafeQuoting(t *testing.T) {
command := shellCommand(context.Background(), `"C:\Program Files\FreeFileSync\FreeFileSync.exe" "D:\Local\Programs\FreeFileSync\Jobs\Auto.ffs_batch"`)
winproc.ConfigureHiddenWindow(command)
want := `cmd.exe /S /C ""C:\Program Files\FreeFileSync\FreeFileSync.exe" "D:\Local\Programs\FreeFileSync\Jobs\Auto.ffs_batch""`
if command.SysProcAttr == nil {
t.Fatal("expected SysProcAttr")
}
if command.SysProcAttr.CmdLine != want {
t.Fatalf("expected command line %q, got %q", want, command.SysProcAttr.CmdLine)
}
}
func TestWindowsShellCommandLineQuotesUnquotedProgramPath(t *testing.T) {
got := windowsShellCommandLine(`C:\Program Files\Joplin\Joplin.exe --profile "D:\Joplin Profile"`)
want := `cmd.exe /S /C ""C:\Program Files\Joplin\Joplin.exe" --profile "D:\Joplin Profile""`
if got != want {
t.Fatalf("expected command line %q, got %q", want, got)
}
}
// TestQuoteLeadingWindowsProgramPathPicksEarliestBoundedExtension pins the
// fix for the quoting bug found in the whole-project review: the program
// path must end at the *earliest* extension match that sits at a token
// boundary, not the first extension in the .exe/.cmd/.bat/.com list order,
// and not a substring match inside another word.
func TestQuoteLeadingWindowsProgramPathPicksEarliestBoundedExtension(t *testing.T) {
cases := []struct {
name string
command string
want string
}{
{
name: "bat with unquoted argument",
command: `C:\My Tools\run.bat D:\in.txt`,
want: `"C:\My Tools\run.bat" D:\in.txt`,
},
{
name: "bat program with exe argument",
command: `C:\My Tools\run.bat C:\Windows\System32\notepad.exe`,
want: `"C:\My Tools\run.bat" C:\Windows\System32\notepad.exe`,
},
{
name: "cmd program with exe argument",
command: `C:\Program Files\App\deploy.cmd D:\stage\setup.exe`,
want: `"C:\Program Files\App\deploy.cmd" D:\stage\setup.exe`,
},
{
name: "exe substring inside directory name",
command: `C:\dir.exexample\My Tool\run.bat`,
want: `"C:\dir.exexample\My Tool\run.bat"`,
},
}
for _, tc := range cases {
t.Run(tc.name, func(t *testing.T) {
if got := quoteLeadingWindowsProgramPath(tc.command); got != tc.want {
t.Fatalf("quoteLeadingWindowsProgramPath(%q) = %q, want %q", tc.command, got, tc.want)
}
})
}
}
src/runner/seed.go
+173
View File
@@ -0,0 +1,173 @@
package runner
import (
"bufio"
"os"
"path/filepath"
"sort"
"strconv"
"strings"
"gitea.mixdep.ru/mix/gosentry/src/domain"
)
// SeededStats are the aggregate execution-time statistics reconstructed from a
// job's existing log files at startup. The fields mirror the run-time counters
// on domain.JobRuntime so the caller can fold them in directly.
type SeededStats struct {
RunCount int
FailCount int
LastDurationMS int64
AvgDurationMS int64
MaxDurationMS int64
TimedRunCount int
// DurationSumMS is the running total AvgDurationMS was computed from, folded
// into JobRuntime.DurationSumMS so app.updateStats continues the same exact
// sum instead of restarting from a value it would have to reverse-multiply.
DurationSumMS int64
}
// SeedStats scans logsDir once and reconstructs per-job execution-time
// statistics from the log files written by previous runs, keyed by Job.ID.
//
// Log files are matched primarily by the job_id header line writeRunLog writes.
// When that header is absent (legacy logs), files fall back to the sanitized
// job-name suffix in the filename. For each job only the newest maxFiles
// matching logs are parsed, mirroring the retention policy that CleanupLogs
// enforces; a maxFiles of zero or less means "no bound". The duration and state
// are read from each log's header. Logs written before duration tracking existed
// carry no duration line: those are tolerated — they still count toward RunCount
// and FailCount but are left out of the duration aggregates (last/avg/max) so a
// missing duration cannot masquerade as a zero-millisecond run.
//
// A missing or unreadable logs directory yields an empty map rather than an
// error: seeding is best-effort and must never block startup.
func SeedStats(logsDir string, jobs []domain.Job, maxFiles int) map[int]SeededStats {
result := make(map[int]SeededStats, len(jobs))
entries, err := os.ReadDir(logsDir)
if err != nil {
return result
}
byID := make(map[int][]logSummary)
byName := make(map[string][]logSummary)
for _, entry := range entries {
if entry.IsDir() {
continue
}
name := entry.Name()
if !strings.HasSuffix(strings.ToLower(name), ".log") {
continue
}
summary := readLogSummary(filepath.Join(logsDir, name))
summary.name = name
if summary.hasJobID {
byID[summary.jobID] = append(byID[summary.jobID], summary)
continue
}
base := name[:len(name)-len(".log")]
idx := strings.Index(base, "_")
if idx < 0 {
continue
}
byName[base[idx+1:]] = append(byName[base[idx+1:]], summary)
}
for _, job := range jobs {
files := byID[job.ID]
if len(files) == 0 {
files = byName[sanitizeFileName(job.Name)]
}
if len(files) == 0 {
continue
}
// The timestamp prefix sorts chronologically, so a lexical sort by file
// name puts the oldest first; keep the newest maxFiles to honor the
// retention bound.
sort.Slice(files, func(i, j int) bool { return files[i].name < files[j].name })
if maxFiles > 0 && len(files) > maxFiles {
files = files[len(files)-maxFiles:]
}
result[job.ID] = aggregateLogStats(files)
}
return result
}
// aggregateLogStats folds the already-read header of each log file (oldest
// first) into one SeededStats. Files lacking a duration line contribute to the
// run/fail counts but not to the duration aggregates.
func aggregateLogStats(files []logSummary) SeededStats {
var stats SeededStats
var durationSum int64
var durationCount int
for _, file := range files {
stats.RunCount++
if file.state == "Failed" {
stats.FailCount++
}
if file.hasDuration {
// Files are oldest first, so the last assignment is the newest run.
stats.LastDurationMS = file.durationMS
if file.durationMS > stats.MaxDurationMS {
stats.MaxDurationMS = file.durationMS
}
durationSum += file.durationMS
durationCount++
}
}
if durationCount > 0 {
stats.TimedRunCount = durationCount
stats.DurationSumMS = durationSum
stats.AvgDurationMS = durationSum / int64(durationCount)
}
return stats
}
// logSummary is everything SeedStats needs from one run log: the file name it
// sorts by, which job wrote it, how the run ended, and how long it took.
type logSummary struct {
name string
jobID int
hasJobID bool
state string
durationMS int64
hasDuration bool
}
// readLogSummary reads the job_id, state, and duration fields from a log file's
// header (the lines before the first blank line) in a single pass, so seeding
// opens each log once rather than once to find its job and again to read its
// result. The has* flags report whether a well-formed line was present,
// distinguishing a legacy log written before the field existed from one that
// genuinely recorded a zero value. An unreadable file yields a zero summary,
// which falls back to matching by the job name in the file name.
func readLogSummary(path string) logSummary {
var summary logSummary
file, err := os.Open(path)
if err != nil {
return summary
}
defer file.Close()
scanner := bufio.NewScanner(file)
for scanner.Scan() {
line := scanner.Text()
if line == "" {
break // end of header
}
if rest, ok := strings.CutPrefix(line, "job_id: "); ok {
if id, err := strconv.Atoi(strings.TrimSpace(rest)); err == nil {
summary.jobID = id
summary.hasJobID = true
}
} else if rest, ok := strings.CutPrefix(line, "state: "); ok {
summary.state = strings.TrimSpace(rest)
} else if rest, ok := strings.CutPrefix(line, "duration: "); ok {
if value, err := strconv.ParseInt(strings.TrimSpace(rest), 10, 64); err == nil {
summary.durationMS = value
summary.hasDuration = true
}
}
}
return summary
}
src/runner/seed_test.go
+164
View File
@@ -0,0 +1,164 @@
package runner
import (
"os"
"path/filepath"
"strconv"
"strings"
"testing"
"gitea.mixdep.ru/mix/gosentry/src/domain"
)
// writeTestLog writes a minimal log file in the format writeRunLog produces.
// Pass durationMS < 0 to omit the duration line (legacy log simulation).
// When jobID > 0 a job_id header line is included.
func writeTestLog(t *testing.T, dir, filename, state string, durationMS int64, jobID int) {
t.Helper()
var content strings.Builder
if jobID > 0 {
content.WriteString("job_id: ")
content.WriteString(strconv.Itoa(jobID))
content.WriteString("\n")
}
if durationMS >= 0 {
content.WriteString("state: " + state + "\nduration: " + strconv.FormatInt(durationMS, 10) + "\n\n")
} else {
content.WriteString("state: " + state + "\n\n")
}
if err := os.WriteFile(filepath.Join(dir, filename), []byte(content.String()), 0o644); err != nil {
t.Fatal(err)
}
}
func TestSeedStatsBasic(t *testing.T) {
dir := t.TempDir()
job := domain.Job{ID: 1, Name: "Build"}
name := sanitizeFileName(job.Name)
writeTestLog(t, dir, "20260601-100000_"+name+".log", "OK", 200, job.ID)
writeTestLog(t, dir, "20260601-110000_"+name+".log", "Failed", 400, job.ID)
writeTestLog(t, dir, "20260601-120000_"+name+".log", "OK", 600, job.ID)
result := SeedStats(dir, []domain.Job{job}, 0)
s, ok := result[job.ID]
if !ok {
t.Fatal("expected stats for job 1")
}
if s.RunCount != 3 {
t.Errorf("RunCount = %d, want 3", s.RunCount)
}
if s.FailCount != 1 {
t.Errorf("FailCount = %d, want 1", s.FailCount)
}
if s.LastDurationMS != 600 {
t.Errorf("LastDurationMS = %d, want 600", s.LastDurationMS)
}
if s.MaxDurationMS != 600 {
t.Errorf("MaxDurationMS = %d, want 600", s.MaxDurationMS)
}
// avg = (200+400+600)/3 = 400
if s.AvgDurationMS != 400 {
t.Errorf("AvgDurationMS = %d, want 400", s.AvgDurationMS)
}
if s.DurationSumMS != 1200 {
t.Errorf("DurationSumMS = %d, want 1200", s.DurationSumMS)
}
}
// TestSeedStatsDurationLessLegacyLog verifies that a log without a duration
// line still contributes to RunCount/FailCount but is excluded from duration
// aggregates, so a missing duration cannot masquerade as a 0 ms run.
func TestSeedStatsDurationLessLegacyLog(t *testing.T) {
dir := t.TempDir()
job := domain.Job{ID: 2, Name: "Deploy"}
name := sanitizeFileName(job.Name)
// Legacy log (no duration line).
writeTestLog(t, dir, "20260601-080000_"+name+".log", "OK", -1, job.ID)
// Modern log with duration.
writeTestLog(t, dir, "20260601-090000_"+name+".log", "OK", 300, job.ID)
result := SeedStats(dir, []domain.Job{job}, 0)
s := result[job.ID]
if s.RunCount != 2 {
t.Errorf("RunCount = %d, want 2", s.RunCount)
}
if s.FailCount != 0 {
t.Errorf("FailCount = %d, want 0", s.FailCount)
}
// Only the modern log has a duration — avg/last/max must reflect that single entry.
if s.LastDurationMS != 300 {
t.Errorf("LastDurationMS = %d, want 300", s.LastDurationMS)
}
if s.AvgDurationMS != 300 {
t.Errorf("AvgDurationMS = %d, want 300", s.AvgDurationMS)
}
}
// TestSeedStatsMaxFilesHonoured verifies that only the newest N logs are
// parsed when maxFiles is positive.
func TestSeedStatsMaxFilesHonoured(t *testing.T) {
dir := t.TempDir()
job := domain.Job{ID: 3, Name: "Cleanup"}
name := sanitizeFileName(job.Name)
// Write 3 logs; only the 2 newest should be counted (maxFiles=2).
writeTestLog(t, dir, "20260601-060000_"+name+".log", "OK", 100, job.ID)
writeTestLog(t, dir, "20260601-070000_"+name+".log", "OK", 200, job.ID)
writeTestLog(t, dir, "20260601-080000_"+name+".log", "Failed", 300, job.ID)
result := SeedStats(dir, []domain.Job{job}, 2)
s := result[job.ID]
if s.RunCount != 2 {
t.Errorf("RunCount = %d, want 2 (maxFiles=2)", s.RunCount)
}
if s.FailCount != 1 {
t.Errorf("FailCount = %d, want 1", s.FailCount)
}
}
// TestSeedStatsMissingDir yields an empty map and does not panic.
func TestSeedStatsMissingDir(t *testing.T) {
result := SeedStats(filepath.Join(t.TempDir(), "no-such-dir"), []domain.Job{{ID: 1, Name: "J"}}, 0)
if len(result) != 0 {
t.Errorf("expected empty result for missing dir, got %v", result)
}
}
// TestSeedStatsUnknownJobProducesNoEntry verifies that log files not matching
// any known job are silently ignored.
func TestSeedStatsUnknownJobProducesNoEntry(t *testing.T) {
dir := t.TempDir()
writeTestLog(t, dir, "20260601-100000_UnknownJob.log", "OK", 100, 0)
result := SeedStats(dir, []domain.Job{{ID: 1, Name: "KnownJob"}}, 0)
if _, ok := result[1]; ok {
t.Error("expected no entry for a job with no matching log files")
}
}
// TestSeedStatsMatchesByJobID verifies that logs are associated by job_id even
// when sanitized job names would collide.
func TestSeedStatsMatchesByJobID(t *testing.T) {
dir := t.TempDir()
jobA := domain.Job{ID: 1, Name: "foo@bar"}
jobB := domain.Job{ID: 2, Name: "foo bar"}
colliding := sanitizeFileName(jobA.Name)
if colliding != sanitizeFileName(jobB.Name) {
t.Fatalf("test setup: expected colliding sanitized names, got %q and %q", sanitizeFileName(jobA.Name), sanitizeFileName(jobB.Name))
}
writeTestLog(t, dir, "20260601-100000_"+colliding+".log", "OK", 100, jobA.ID)
writeTestLog(t, dir, "20260601-110000_"+colliding+".log", "Failed", 200, jobB.ID)
result := SeedStats(dir, []domain.Job{jobA, jobB}, 0)
if result[jobA.ID].RunCount != 1 || result[jobA.ID].LastDurationMS != 100 {
t.Errorf("job A stats = %+v, want one OK run at 100 ms", result[jobA.ID])
}
if result[jobB.ID].RunCount != 1 || result[jobB.ID].FailCount != 1 || result[jobB.ID].LastDurationMS != 200 {
t.Errorf("job B stats = %+v, want one Failed run at 200 ms", result[jobB.ID])
}
}
src/storage/paths.go
+12 -11
View File
@@ -9,15 +9,13 @@ const (
// The config file stays beside the executable so the portable build behaves // The config file stays beside the executable so the portable build behaves
// predictably: moving the program folder moves its settings with it. // predictably: moving the program folder moves its settings with it.
ConfigFileName = "gosentry.json" ConfigFileName = "gosentry.json"
// Jobs are kept in a separate JSON file because the user can choose a // Jobs are kept in a separate JSON file because the user can point the
// different jobs directory, while application settings remain local to the // configuration at any jobs file they like, while application settings
// installed/copied program. // remain local to the installed/copied program. This is only the default
// name, used before the config is read and when an older config that named
// just a directory is migrated.
JobsFileName = "jobs.json" JobsFileName = "jobs.json"
// Legacy YAML file names used by builds before the JSON migration. These are
// read once on first start (P1.4) and then replaced by the JSON equivalents.
legacyYAMLConfigFileName = "gosentry.yaml"
legacyYAMLJobsFileName = "jobs.yaml"
) )
// Paths contains both the physical program location and the resolved runtime // Paths contains both the physical program location and the resolved runtime
@@ -27,10 +25,13 @@ type Paths struct {
ExecutablePath string ExecutablePath string
AppDir string AppDir string
ConfigPath string ConfigPath string
JobsDir string // JobsDir is the directory containing JobsPath. It is derived from the
JobsPath string // configured jobs file, never configured on its own, and exists so writers
LogsDir string // can create the folder before saving.
DesktopIcon string JobsDir string
JobsPath string
LogsDir string
DesktopIcon string
} }
func ResolvePaths() (Paths, error) { func ResolvePaths() (Paths, error) {
src/storage/store.go
+203 -157
View File
@@ -9,7 +9,6 @@ import (
"strings" "strings"
"gitea.mixdep.ru/mix/gosentry/src/domain" "gitea.mixdep.ru/mix/gosentry/src/domain"
"go.yaml.in/yaml/v4"
) )
type Store struct { type Store struct {
@@ -17,37 +16,26 @@ type Store struct {
Config domain.Config Config domain.Config
} }
// yamlConfig and yamlJob / yamlJobsFile mirror the durable domain types using the // PeekKeepRunningInTray reads keep_running_in_tray from gosentry.json for startup
// yaml tags that pre-JSON-migration files carried. They exist only so the // decisions that must run before app.Open(). On error it returns the built-in
// one-time import can parse a legacy gosentry.yaml / jobs.yaml; the domain types // default.
// themselves stay JSON-only. Field layout must stay identical to the matching //
// domain struct so the value conversions in importYAMLConfig / importYAMLJobs // Despite the name, this can write: loadOrCreateConfig creates gosentry.json
// remain valid. // with defaults on first run, the same as OpenStore does moments later when
type yamlConfig struct { // app.Open() parses the now-existing file again. The double parse and the
JobsDir string `yaml:"jobs_dir"` // write-on-read are both harmless — the second read just sees the file the
LogsDir string `yaml:"logs_dir"` // first one created — but worth knowing before adding a third startup path
MaxLogFiles int `yaml:"max_log_files"` // that also wants an early look at the config.
MaxLogAgeDays int `yaml:"max_log_age_days"` func PeekKeepRunningInTray() bool {
StartOnLogin bool `yaml:"start_on_login,omitempty"` paths, err := ResolvePaths()
KeepRunningInTray bool `yaml:"keep_running_in_tray,omitempty"` if err != nil {
NotifyOnFailure bool `yaml:"notify_on_failure,omitempty"` return domain.DefaultConfig().KeepRunningInTray
ExecutionMode domain.ExecutionMode `yaml:"execution_mode,omitempty"` }
OverlapPolicy domain.OverlapPolicy `yaml:"overlap_policy,omitempty"` config, err := loadOrCreateConfig(paths)
} if err != nil {
return domain.DefaultConfig().KeepRunningInTray
type yamlJob struct { }
ID int `yaml:"id"` return config.KeepRunningInTray
Name string `yaml:"name"`
Folder string `yaml:"folder,omitempty"`
Schedule string `yaml:"schedule"`
Command string `yaml:"command"`
Arguments string `yaml:"arguments,omitempty"`
StartOnly bool `yaml:"start_only,omitempty"`
Enabled bool `yaml:"enabled"`
}
type yamlJobsFile struct {
Jobs []yamlJob `yaml:"jobs"`
} }
func OpenStore() (*Store, []domain.Job, error) { func OpenStore() (*Store, []domain.Job, error) {
@@ -84,135 +72,115 @@ func OpenStore() (*Store, []domain.Job, error) {
return store, jobs, nil return store, jobs, nil
} }
func (s *Store) SaveConfig() error { // PrepareSaveConfig re-resolves the derived paths from the current config and
// snapshots everything the write needs, returning the write itself as a closure.
// It exists so a caller that guards the Store with its own lock can do the file
// I/O — a marshal, an fsync, and a rename — after releasing that lock: the
// snapshot cannot change under the closure, so running it unlocked is safe.
// Prepared writes must be run in the order they were prepared, or an older
// snapshot can land on top of a newer one.
func (s *Store) PrepareSaveConfig() func() error {
s.applyConfigPaths() s.applyConfigPaths()
if err := os.MkdirAll(s.Paths.AppDir, 0o755); err != nil { dir := s.Paths.AppDir
return err path := s.Paths.ConfigPath
config := s.Config
return func() error {
if err := os.MkdirAll(dir, 0o755); err != nil {
return err
}
return writeJSON(path, config)
} }
return writeJSON(s.Paths.ConfigPath, s.Config) }
// PrepareSaveJobs is PrepareSaveConfig for the jobs file. The jobs slice is
// copied, so the caller may keep mutating its own slice as soon as this returns.
func (s *Store) PrepareSaveJobs(jobs []domain.Job) func() error {
dir := s.Paths.JobsDir
path := s.Paths.JobsPath
snapshot := make([]domain.Job, len(jobs))
copy(snapshot, jobs)
return func() error {
if err := os.MkdirAll(dir, 0o755); err != nil {
return err
}
return writeJSON(path, domain.JobsFile{Jobs: snapshot})
}
}
func (s *Store) SaveConfig() error {
return s.PrepareSaveConfig()()
} }
func (s *Store) SaveJobs(jobs []domain.Job) error { func (s *Store) SaveJobs(jobs []domain.Job) error {
if err := os.MkdirAll(s.Paths.JobsDir, 0o755); err != nil { return s.PrepareSaveJobs(jobs)()
return err
}
return writeJSON(s.Paths.JobsPath, domain.JobsFile{Jobs: jobs})
} }
func loadOrCreateConfig(paths Paths) (domain.Config, error) { func loadOrCreateConfig(paths Paths) (domain.Config, error) {
// Defaults favor a portable installation: settings and jobs begin next to the // Defaults favor a portable installation: settings and jobs begin next to the
// executable, while logs are grouped under a dedicated subdirectory. // executable, while logs are grouped under a dedicated subdirectory.
config := domain.Config{ config := domain.DefaultConfig()
JobsDir: ".",
LogsDir: "logs",
MaxLogFiles: 100,
MaxLogAgeDays: 30,
StartOnLogin: false,
KeepRunningInTray: true,
NotifyOnFailure: true,
ExecutionMode: domain.ExecutionModeParallel,
OverlapPolicy: domain.OverlapPolicySkip,
}
if _, err := os.Stat(paths.ConfigPath); errors.Is(err, os.ErrNotExist) { if _, err := os.Stat(paths.ConfigPath); errors.Is(err, os.ErrNotExist) {
// No JSON config yet. Import a pre-migration gosentry.yaml once if it is return config, writeJSON(paths.ConfigPath, config)
// present; otherwise write the defaults so later starts read a normal JSON
// file. The caller's SaveConfig rewrites whatever is loaded as gosentry.json.
legacyPath := filepath.Join(paths.AppDir, legacyYAMLConfigFileName)
imported, ok, err := importYAMLConfig(legacyPath, config)
if err != nil {
return domain.Config{}, err
}
if !ok {
return config, writeJSON(paths.ConfigPath, config)
}
config = imported
} else {
data, err := os.ReadFile(paths.ConfigPath)
if err != nil {
return domain.Config{}, err
}
if err := json.Unmarshal(data, &config); err != nil {
return domain.Config{}, err
}
} }
if strings.TrimSpace(config.JobsDir) == "" { data, err := os.ReadFile(paths.ConfigPath)
if err != nil {
return domain.Config{}, err
}
// Clearing the default first keeps "the file sets jobs_file" distinguishable
// from "the file omits it", which the jobs_dir migration below depends on.
// The fallbacks restore a value in either case.
config.JobsFile = ""
if err := json.Unmarshal(data, &config); err != nil {
return domain.Config{}, err
}
// A config written before the setting named a file carries jobs_dir instead
// of jobs_file. Keep its meaning by appending the fixed name that version
// used, then drop the old key so the file is rewritten in the current shape.
if strings.TrimSpace(config.JobsFile) == "" && strings.TrimSpace(config.JobsDir) != "" {
config.JobsFile = filepath.Join(config.JobsDir, JobsFileName)
}
config.JobsDir = ""
if strings.TrimSpace(config.JobsFile) == "" {
// Empty paths are treated as missing values rather than intentional root // Empty paths are treated as missing values rather than intentional root
// directories. This avoids accidentally writing jobs to unexpected places. // directories. This avoids accidentally writing jobs to unexpected places.
config.JobsDir = "." config.JobsFile = JobsFileName
} }
if strings.TrimSpace(config.LogsDir) == "" { if strings.TrimSpace(config.LogsDir) == "" {
config.LogsDir = "logs" config.LogsDir = "logs"
} }
if config.MaxLogFiles <= 0 { // MaxLogFiles and MaxLogAgeDays are deliberately not normalized: 0 means
config.MaxLogFiles = 100 // "keep everything" (see runner.CleanupLogs), not a missing value, so
} // backfilling it here would make that choice impossible to persist. A config
if config.MaxLogAgeDays <= 0 { // written before either field existed already carries 0 from json.Unmarshal
config.MaxLogAgeDays = 30 // leaving the DefaultConfig() value in config untouched, so old files still
} // pick up 100 / 30 without an explicit backfill.
if config.ExecutionMode == "" { if config.ExecutionMode == "" {
config.ExecutionMode = domain.ExecutionModeParallel config.ExecutionMode = domain.ExecutionModeParallel
} }
if config.OverlapPolicy == "" { if config.OverlapPolicy == "" {
config.OverlapPolicy = domain.OverlapPolicySkip config.OverlapPolicy = domain.OverlapPolicySkip
} }
// DefaultTimeoutSeconds is deliberately not normalized: 0 is a meaningful
// value ("no timeout"), not a missing one, so backfilling it here would make
// the setting impossible to persist. Negative values are rejected by
// app.validateConfig before they can be saved.
if config.Theme == "" {
config.Theme = domain.ThemeGoSentry
}
if config.Theme == "default" {
config.Theme = domain.ThemeSystem
}
return config, nil return config, nil
} }
func loadOrCreateJobs(path string) ([]domain.Job, error) { // LoadJobsFile reads and normalizes the job definitions at path. The bool
if _, err := os.Stat(path); errors.Is(err, os.ErrNotExist) { // reports whether the file was there: a missing file is not an error but the
// No JSON jobs file yet. Import a pre-migration jobs.yaml once if present; // answer to "is this file already a jobs file?", which is what the Settings tab
// otherwise seed harmless sample jobs so a new user can immediately see // needs when the user points the application at a different jobs file.
// scheduled and manual execution without inventing a command. Imported jobs func LoadJobsFile(path string) ([]domain.Job, bool, error) {
// are returned unsaved here — the caller's SaveJobs rewrites them as
// jobs.json after normalization.
legacyPath := filepath.Join(filepath.Dir(path), legacyYAMLJobsFileName)
imported, ok, err := importYAMLJobs(legacyPath)
if err != nil {
return nil, err
}
if ok {
return imported, nil
}
jobs := defaultJobs()
normalizeJobs(jobs)
return jobs, writeJSON(path, domain.JobsFile{Jobs: jobs})
}
data, err := os.ReadFile(path)
if err != nil {
return nil, err
}
var file domain.JobsFile
if err := json.Unmarshal(data, &file); err != nil {
return nil, err
}
return file.Jobs, nil
}
// importYAMLConfig reads a pre-migration gosentry.yaml into the current Config
// shape. It returns ok=false when the file is absent so the caller falls back to
// writing fresh defaults. The supplied base seeds the shadow struct so keys that
// the YAML omits keep their default value instead of becoming zero.
func importYAMLConfig(path string, base domain.Config) (domain.Config, bool, error) {
data, err := os.ReadFile(path)
if errors.Is(err, os.ErrNotExist) {
return domain.Config{}, false, nil
}
if err != nil {
return domain.Config{}, false, err
}
shadow := yamlConfig(base)
if err := yaml.Unmarshal(data, &shadow); err != nil {
return domain.Config{}, false, err
}
return domain.Config(shadow), true, nil
}
// importYAMLJobs reads a pre-migration jobs.yaml into durable domain jobs. It
// returns ok=false when the file is absent so the caller can seed default jobs.
func importYAMLJobs(path string) ([]domain.Job, bool, error) {
data, err := os.ReadFile(path) data, err := os.ReadFile(path)
if errors.Is(err, os.ErrNotExist) { if errors.Is(err, os.ErrNotExist) {
return nil, false, nil return nil, false, nil
@@ -220,26 +188,44 @@ func importYAMLJobs(path string) ([]domain.Job, bool, error) {
if err != nil { if err != nil {
return nil, false, err return nil, false, err
} }
var file yamlJobsFile var file domain.JobsFile
if err := yaml.Unmarshal(data, &file); err != nil { if err := json.Unmarshal(data, &file); err != nil {
return nil, false, err return nil, false, err
} }
jobs := make([]domain.Job, len(file.Jobs)) normalizeJobs(file.Jobs)
for i := range file.Jobs { return file.Jobs, true, nil
jobs[i] = domain.Job(file.Jobs[i]) }
func loadOrCreateJobs(path string) ([]domain.Job, error) {
jobs, found, err := LoadJobsFile(path)
if err != nil {
return nil, err
} }
return jobs, true, nil if found {
return jobs, nil
}
// Seed sample jobs so a new user can immediately see scheduled and manual
// execution without inventing a command. The failure sample stays disabled
// so it does not spam notifications; Run now still works for testing.
jobs = defaultJobs()
normalizeJobs(jobs)
return jobs, writeJSON(path, domain.JobsFile{Jobs: jobs})
} }
func normalizeJobs(jobs []domain.Job) { func normalizeJobs(jobs []domain.Job) {
next := 1 next := 1
seen := make(map[int]bool, len(jobs))
for index := range jobs { for index := range jobs {
job := &jobs[index] job := &jobs[index]
if job.ID <= 0 { if job.ID <= 0 || seen[job.ID] {
// IDs are assigned only when absent. Existing IDs stay stable because // IDs are assigned only when absent or already claimed by an earlier job
// History and future log associations use them to identify jobs. // in this file — a hand-edited jobs.json can carry two entries with the
// same ID, which would otherwise share one runtime, one schedule-cache
// entry, and one SeedStats bucket. Existing, unique IDs stay stable
// because History and future log associations use them to identify jobs.
job.ID = next job.ID = next
} }
seen[job.ID] = true
if job.ID >= next { if job.ID >= next {
next = job.ID + 1 next = job.ID + 1
} }
@@ -261,28 +247,36 @@ func normalizeJobs(jobs []domain.Job) {
} }
} }
func resolveJobsDir(appDir string, jobsDir string) string { // ResolveConfiguredPath turns a file or directory path from the config into the
return resolveConfiguredDir(appDir, jobsDir) // absolute path the application will actually use. It is exported so callers
} // outside storage — the settings tab, which opens the configured logs folder —
// apply the same rule to a path the user has typed but not yet saved.
func resolveConfiguredDir(appDir string, dir string) string { func ResolveConfiguredPath(appDir string, path string) string {
if filepath.IsAbs(dir) { if filepath.IsAbs(path) {
return dir // Cleaned so two spellings of the same file (forward vs. backslashes, a
// trailing separator) resolve to the same string. UpdateSettings compares
// this against Paths.JobsPath to decide whether the jobs file is changing,
// so an uncleaned path here could trigger a spurious adoption against the
// file the app is already using.
return filepath.Clean(path)
} }
// Relative paths are resolved against the executable directory, not the // Relative paths are resolved against the executable directory, not the
// process working directory. This matches ResolvePaths and keeps shortcuts, // process working directory. This matches ResolvePaths and keeps shortcuts,
// Explorer launches, and terminal launches consistent. // Explorer launches, and terminal launches consistent.
return filepath.Clean(filepath.Join(appDir, dir)) return filepath.Clean(filepath.Join(appDir, path))
} }
func (s *Store) applyConfigPaths() { func (s *Store) applyConfigPaths() {
s.Paths.JobsDir = resolveConfiguredDir(s.Paths.AppDir, s.Config.JobsDir) // The jobs file is configured as a whole path; its directory is derived so
s.Paths.JobsPath = filepath.Join(s.Paths.JobsDir, JobsFileName) // SaveJobs can create the folder when the user points at a new location.
s.Paths.LogsDir = resolveConfiguredDir(s.Paths.AppDir, s.Config.LogsDir) s.Paths.JobsPath = ResolveConfiguredPath(s.Paths.AppDir, s.Config.JobsFile)
s.Paths.JobsDir = filepath.Dir(s.Paths.JobsPath)
s.Paths.LogsDir = ResolveConfiguredPath(s.Paths.AppDir, s.Config.LogsDir)
} }
func writeJSON(path string, value any) error { func writeJSON(path string, value any) error {
if err := os.MkdirAll(filepath.Dir(path), 0o755); err != nil { dir := filepath.Dir(path)
if err := os.MkdirAll(dir, 0o755); err != nil {
return err return err
} }
data, err := json.MarshalIndent(value, "", " ") data, err := json.MarshalIndent(value, "", " ")
@@ -292,10 +286,47 @@ func writeJSON(path string, value any) error {
// A trailing newline keeps the file friendly to editors and diff tools that // A trailing newline keeps the file friendly to editors and diff tools that
// expect text files to end with one. // expect text files to end with one.
data = append(data, '\n') data = append(data, '\n')
// WriteFile replaces the full file instead of patching it in place. For small return writeFileAtomic(dir, path, data, 0o644)
// JSON files this is simpler and prevents stale keys from older versions from }
// lingering after the schema changes.
return os.WriteFile(path, data, 0o644) // writeFileAtomic writes data to a temp file in dir, syncs it, then renames it
// over path. Rename is atomic within a volume on both supported platforms, so
// a crash, a power loss, or the process being killed mid-write can never leave
// path holding a truncated or empty file the way a direct os.WriteFile could.
func writeFileAtomic(dir, path string, data []byte, perm os.FileMode) error {
tmp, err := os.CreateTemp(dir, filepath.Base(path)+".tmp*")
if err != nil {
return err
}
tmpPath := tmp.Name()
// Any failure past this point must remove the temp file rather than leave
// it behind for the next write to trip over.
success := false
defer func() {
if !success {
os.Remove(tmpPath)
}
}()
if _, err := tmp.Write(data); err != nil {
tmp.Close()
return err
}
if err := tmp.Sync(); err != nil {
tmp.Close()
return err
}
if err := tmp.Close(); err != nil {
return err
}
if err := os.Chmod(tmpPath, perm); err != nil {
return err
}
if err := os.Rename(tmpPath, path); err != nil {
return err
}
success = true
return nil
} }
func defaultJobs() []domain.Job { func defaultJobs() []domain.Job {
@@ -323,9 +354,24 @@ func defaultJobs() []domain.Job {
Command: echoCommand("This paused sample should not run until enabled"), Command: echoCommand("This paused sample should not run until enabled"),
Enabled: false, Enabled: false,
}, },
{
ID: 4,
Name: "Failure notification test",
Folder: "Examples",
Schedule: "@every 1m",
Command: failCommand(),
Enabled: false,
},
} }
} }
func failCommand() string {
if runtime.GOOS == "windows" {
return "exit /b 1"
}
return "exit 1"
}
func echoCommand(message string) string { func echoCommand(message string) string {
if runtime.GOOS == "windows" { if runtime.GOOS == "windows" {
return "echo " + message return "echo " + message
src/storage/store_test.go
+329 -72
View File
@@ -4,21 +4,13 @@ import (
"encoding/json" "encoding/json"
"os" "os"
"path/filepath" "path/filepath"
"runtime"
"strings" "strings"
"testing" "testing"
"gitea.mixdep.ru/mix/gosentry/src/domain" "gitea.mixdep.ru/mix/gosentry/src/domain"
"go.yaml.in/yaml/v4"
) )
func writeYAML(path string, value any) error {
data, err := yaml.Marshal(value)
if err != nil {
return err
}
return os.WriteFile(path, data, 0o644)
}
func TestJobsRoundTrip(t *testing.T) { func TestJobsRoundTrip(t *testing.T) {
dir := t.TempDir() dir := t.TempDir()
path := filepath.Join(dir, "jobs.json") path := filepath.Join(dir, "jobs.json")
@@ -86,7 +78,7 @@ func TestConfigRoundTrip(t *testing.T) {
} }
want := domain.Config{ want := domain.Config{
JobsDir: "/custom/jobs", JobsFile: "/custom/jobs/team.json",
LogsDir: "/custom/logs", LogsDir: "/custom/logs",
MaxLogFiles: 50, MaxLogFiles: 50,
MaxLogAgeDays: 14, MaxLogAgeDays: 14,
@@ -103,8 +95,8 @@ func TestConfigRoundTrip(t *testing.T) {
t.Fatal(err) t.Fatal(err)
} }
if got.JobsDir != want.JobsDir { if got.JobsFile != want.JobsFile {
t.Errorf("JobsDir: got %q, want %q", got.JobsDir, want.JobsDir) t.Errorf("JobsFile: got %q, want %q", got.JobsFile, want.JobsFile)
} }
if got.LogsDir != want.LogsDir { if got.LogsDir != want.LogsDir {
t.Errorf("LogsDir: got %q, want %q", got.LogsDir, want.LogsDir) t.Errorf("LogsDir: got %q, want %q", got.LogsDir, want.LogsDir)
@@ -154,50 +146,50 @@ func TestNormalizeJobsFillsDefaults(t *testing.T) {
} }
} }
// TestLoadOrCreateConfigMigratesFromLegacy verifies that when gosentry.json is // TestNormalizeJobsReassignsDuplicateIDs pins the fix for a hand-edited
// absent but gosentry.yaml exists the config is read from the legacy YAML file. // jobs.json carrying two entries with the same ID: without reassignment both
// This lets installs that pre-date the JSON migration start without manual steps. // would share one JobRuntime, one schedule-cache entry, and one SeedStats
func TestLoadOrCreateConfigMigratesFromLegacy(t *testing.T) { // bucket, so editing or deleting either would silently affect both.
dir := t.TempDir() func TestNormalizeJobsReassignsDuplicateIDs(t *testing.T) {
paths := Paths{ jobs := []domain.Job{
AppDir: dir, {ID: 5, Name: "First"},
ConfigPath: filepath.Join(dir, ConfigFileName), // gosentry.json — not created {ID: 5, Name: "Second"},
{ID: 5, Name: "Third"},
} }
legacy := yamlConfig{ normalizeJobs(jobs)
JobsDir: "/legacy/jobs",
LogsDir: "/legacy/logs",
MaxLogFiles: 77,
MaxLogAgeDays: 13,
StartOnLogin: true,
}
if err := writeYAML(filepath.Join(dir, legacyYAMLConfigFileName), legacy); err != nil {
t.Fatal(err)
}
got, err := loadOrCreateConfig(paths) seen := make(map[int]bool, len(jobs))
if err != nil { for _, job := range jobs {
t.Fatal(err) if seen[job.ID] {
t.Fatalf("ID %d assigned to more than one job after normalization: %+v", job.ID, jobs)
}
seen[job.ID] = true
} }
if got.JobsDir != legacy.JobsDir { if jobs[0].ID != 5 {
t.Errorf("JobsDir: got %q, want %q", got.JobsDir, legacy.JobsDir) t.Errorf("first occurrence should keep its ID: got %d, want 5", jobs[0].ID)
} }
if got.LogsDir != legacy.LogsDir { if jobs[1].ID == 5 || jobs[2].ID == 5 {
t.Errorf("LogsDir: got %q, want %q", got.LogsDir, legacy.LogsDir) t.Errorf("later duplicates should be reassigned away from 5: got %d, %d", jobs[1].ID, jobs[2].ID)
} }
if got.MaxLogFiles != legacy.MaxLogFiles { }
t.Errorf("MaxLogFiles: got %d, want %d", got.MaxLogFiles, legacy.MaxLogFiles)
} // TestResolveConfiguredPathCleansAbsolutePaths pins the fix for two spellings
if got.MaxLogAgeDays != legacy.MaxLogAgeDays { // of the same absolute path (forward vs. backslashes) resolving to different
t.Errorf("MaxLogAgeDays: got %d, want %d", got.MaxLogAgeDays, legacy.MaxLogAgeDays) // strings: UpdateSettings compares this against Paths.JobsPath as strings to
} // decide whether the jobs file is changing, so an uncleaned path here could
if got.StartOnLogin != legacy.StartOnLogin { // trigger a spurious adoption against the file already in use.
t.Errorf("StartOnLogin: got %v, want %v", got.StartOnLogin, legacy.StartOnLogin) func TestResolveConfiguredPathCleansAbsolutePaths(t *testing.T) {
if runtime.GOOS != "windows" {
t.Skip("backslash vs. forward-slash spellings of the same path are a Windows-only ambiguity")
}
got := ResolveConfiguredPath(`C:\app`, "C:/data/jobs.json")
want := ResolveConfiguredPath(`C:\app`, `C:\data\jobs.json`)
if got != want {
t.Errorf("forward-slash and backslash spellings resolved differently: %q vs %q", got, want)
} }
} }
// TestLoadOrCreateConfigCreatesDefaultsOnFirstRun verifies that the first run
// (no config files present) writes gosentry.json and returns sensible defaults.
func TestLoadOrCreateConfigCreatesDefaultsOnFirstRun(t *testing.T) { func TestLoadOrCreateConfigCreatesDefaultsOnFirstRun(t *testing.T) {
dir := t.TempDir() dir := t.TempDir()
paths := Paths{ paths := Paths{
@@ -209,8 +201,8 @@ func TestLoadOrCreateConfigCreatesDefaultsOnFirstRun(t *testing.T) {
if err != nil { if err != nil {
t.Fatal(err) t.Fatal(err)
} }
if got.JobsDir != "." { if got.JobsFile != "jobs.json" {
t.Errorf("default JobsDir = %q, want '.'", got.JobsDir) t.Errorf("default JobsFile = %q, want 'jobs.json'", got.JobsFile)
} }
if got.LogsDir != "logs" { if got.LogsDir != "logs" {
t.Errorf("default LogsDir = %q, want 'logs'", got.LogsDir) t.Errorf("default LogsDir = %q, want 'logs'", got.LogsDir)
@@ -221,12 +213,272 @@ func TestLoadOrCreateConfigCreatesDefaultsOnFirstRun(t *testing.T) {
if got.MaxLogAgeDays != 30 { if got.MaxLogAgeDays != 30 {
t.Errorf("default MaxLogAgeDays = %d, want 30", got.MaxLogAgeDays) t.Errorf("default MaxLogAgeDays = %d, want 30", got.MaxLogAgeDays)
} }
if got.DefaultTimeoutSeconds != 0 {
t.Errorf("default DefaultTimeoutSeconds = %d, want 0 (no timeout)", got.DefaultTimeoutSeconds)
}
if got.Theme != domain.ThemeGoSentry {
t.Errorf("default Theme = %q, want %q", got.Theme, domain.ThemeGoSentry)
}
if got.JobListView != domain.JobListViewDetailed {
t.Errorf("default JobListView = %q, want %q", got.JobListView, domain.JobListViewDetailed)
}
// The function must have written the defaults to gosentry.json. // The function must have written the defaults to gosentry.json.
if _, err := os.Stat(paths.ConfigPath); err != nil { if _, err := os.Stat(paths.ConfigPath); err != nil {
t.Errorf("gosentry.json should have been created: %v", err) t.Errorf("gosentry.json should have been created: %v", err)
} }
} }
// TestLoadOrCreateConfigPreservesZeroRetentionLimits verifies that 0 in
// max_log_files / max_log_age_days is read back as 0 ("keep everything"), not
// backfilled to the 100 / 30 defaults, since a config that already has the
// field set is not the "field is missing" case loadOrCreateConfig backfills.
func TestLoadOrCreateConfigPreservesZeroRetentionLimits(t *testing.T) {
dir := t.TempDir()
paths := Paths{
AppDir: dir,
ConfigPath: filepath.Join(dir, ConfigFileName),
}
want := domain.DefaultConfig()
want.MaxLogFiles = 0
want.MaxLogAgeDays = 0
if err := writeJSON(paths.ConfigPath, want); err != nil {
t.Fatal(err)
}
got, err := loadOrCreateConfig(paths)
if err != nil {
t.Fatal(err)
}
if got.MaxLogFiles != 0 {
t.Errorf("MaxLogFiles: got %d, want 0 (unlimited)", got.MaxLogFiles)
}
if got.MaxLogAgeDays != 0 {
t.Errorf("MaxLogAgeDays: got %d, want 0 (unlimited)", got.MaxLogAgeDays)
}
}
// TestLoadOrCreateJobsSeedsSampleJobsOnFirstRun verifies that a missing
// jobs.json is created with the sample jobs from defaultJobs, so a new user
// sees scheduled and manual execution without inventing a command.
func TestLoadOrCreateJobsSeedsSampleJobsOnFirstRun(t *testing.T) {
dir := t.TempDir()
path := filepath.Join(dir, "jobs.json")
got, err := loadOrCreateJobs(path)
if err != nil {
t.Fatal(err)
}
want := defaultJobs()
if len(got) != len(want) {
t.Fatalf("got %d jobs, want %d", len(got), len(want))
}
for i := range want {
if got[i].Name != want[i].Name || got[i].Schedule != want[i].Schedule || got[i].Command != want[i].Command || got[i].Enabled != want[i].Enabled {
t.Errorf("job %d = %+v, want %+v", i, got[i], want[i])
}
}
// The function must have written the seeded jobs to jobs.json.
data, err := os.ReadFile(path)
if err != nil {
t.Fatalf("jobs.json should have been created: %v", err)
}
var file domain.JobsFile
if err := json.Unmarshal(data, &file); err != nil {
t.Fatal(err)
}
if len(file.Jobs) != len(want) {
t.Errorf("jobs.json has %d jobs, want %d", len(file.Jobs), len(want))
}
}
// TestLoadOrCreateConfigMigratesLegacyThemeDefault covers a gosentry.json that
// still stores the retired "default" theme value: load normalizes it to system.
func TestLoadOrCreateConfigMigratesLegacyThemeDefault(t *testing.T) {
dir := t.TempDir()
paths := Paths{
AppDir: dir,
ConfigPath: filepath.Join(dir, ConfigFileName),
}
legacy := map[string]any{
"jobs_file": "jobs.json",
"logs_dir": "logs",
"max_log_files": 100,
"max_log_age_days": 30,
"theme": "default",
}
if err := writeJSON(paths.ConfigPath, legacy); err != nil {
t.Fatal(err)
}
got, err := loadOrCreateConfig(paths)
if err != nil {
t.Fatal(err)
}
if got.Theme != domain.ThemeSystem {
t.Errorf("migrated Theme = %q, want %q", got.Theme, domain.ThemeSystem)
}
}
// TestLoadOrCreateConfigKeepsZeroTimeoutOnReload guards the "0 = no timeout"
// setting against being normalized away when an existing gosentry.json is read
// back. Loading must not treat 0 as a missing value.
func TestLoadOrCreateConfigKeepsZeroTimeoutOnReload(t *testing.T) {
dir := t.TempDir()
paths := Paths{
AppDir: dir,
ConfigPath: filepath.Join(dir, ConfigFileName),
}
// First call writes the defaults (DefaultTimeoutSeconds = 0) to disk.
if _, err := loadOrCreateConfig(paths); err != nil {
t.Fatal(err)
}
// Second call takes the "file exists" branch, where normalization runs.
reloaded, err := loadOrCreateConfig(paths)
if err != nil {
t.Fatal(err)
}
if reloaded.DefaultTimeoutSeconds != 0 {
t.Errorf("reloaded DefaultTimeoutSeconds = %d, want 0 (no timeout)", reloaded.DefaultTimeoutSeconds)
}
}
// TestLoadOrCreateConfigMigratesJobsDir covers a gosentry.json written before
// the setting named a file: the old jobs_dir keeps pointing at the same jobs
// file, and the retired key is dropped so it is not written back.
func TestLoadOrCreateConfigMigratesJobsDir(t *testing.T) {
dir := t.TempDir()
paths := Paths{
AppDir: dir,
ConfigPath: filepath.Join(dir, ConfigFileName),
}
legacy := map[string]any{
"jobs_dir": filepath.Join(dir, "shared"),
"logs_dir": "logs",
"max_log_files": 100,
"max_log_age_days": 30,
}
if err := writeJSON(paths.ConfigPath, legacy); err != nil {
t.Fatal(err)
}
got, err := loadOrCreateConfig(paths)
if err != nil {
t.Fatal(err)
}
want := filepath.Join(dir, "shared", JobsFileName)
if got.JobsFile != want {
t.Errorf("migrated JobsFile: got %q, want %q", got.JobsFile, want)
}
if got.JobsDir != "" {
t.Errorf("legacy JobsDir should be cleared, got %q", got.JobsDir)
}
// The migrated config must not carry the retired key once it is saved.
store := &Store{Paths: paths, Config: got}
if err := store.SaveConfig(); err != nil {
t.Fatal(err)
}
data, err := os.ReadFile(paths.ConfigPath)
if err != nil {
t.Fatal(err)
}
if strings.Contains(string(data), "jobs_dir") {
t.Errorf("saved config should not contain jobs_dir:\n%s", data)
}
}
// TestLoadJobsFileReportsMissingWithoutCreating covers the loader the Settings
// tab uses to decide between adopting a jobs file and writing the current jobs
// to it: a missing file is reported as "not found" rather than an error, and —
// unlike the startup path — is not seeded with sample jobs.
func TestLoadJobsFileReportsMissingWithoutCreating(t *testing.T) {
dir := t.TempDir()
missing := filepath.Join(dir, "nothing-here.json")
jobs, found, err := LoadJobsFile(missing)
if err != nil {
t.Fatalf("missing file should not be an error: %v", err)
}
if found || jobs != nil {
t.Errorf("missing file: got found=%v jobs=%+v, want false/nil", found, jobs)
}
if _, err := os.Stat(missing); !os.IsNotExist(err) {
t.Error("LoadJobsFile must not create the file it was asked about")
}
// An existing file comes back normalized, so a hand-written jobs file gains
// its IDs and defaults before the application adopts it.
path := filepath.Join(dir, "hand-written.json")
if err := writeJSON(path, domain.JobsFile{Jobs: []domain.Job{{Name: "No ID"}}}); err != nil {
t.Fatal(err)
}
jobs, found, err = LoadJobsFile(path)
if err != nil {
t.Fatal(err)
}
if !found || len(jobs) != 1 {
t.Fatalf("existing file: got found=%v jobs=%+v, want true and one job", found, jobs)
}
if jobs[0].ID != 1 || jobs[0].Schedule == "" || jobs[0].Command == "" {
t.Errorf("loaded job should be normalized, got %+v", jobs[0])
}
}
// TestApplyConfigPathsDerivesJobsDir checks that the jobs file drives both
// resolved paths: relative values resolve against the program folder, and the
// containing directory comes from the file name the user chose.
func TestApplyConfigPathsDerivesJobsDir(t *testing.T) {
dir := t.TempDir()
store := &Store{
Paths: Paths{AppDir: dir},
Config: domain.Config{JobsFile: filepath.Join("shared", "team.json"), LogsDir: "logs"},
}
store.applyConfigPaths()
if want := filepath.Join(dir, "shared", "team.json"); store.Paths.JobsPath != want {
t.Errorf("JobsPath: got %q, want %q", store.Paths.JobsPath, want)
}
if want := filepath.Join(dir, "shared"); store.Paths.JobsDir != want {
t.Errorf("JobsDir: got %q, want %q", store.Paths.JobsDir, want)
}
}
// TestJobTimeoutRoundTripsThreeStates pins the on-disk encoding that keeps
// "inherit" and "no timeout" distinguishable: nil is omitted entirely, while an
// explicit 0 is written and read back as a set value.
func TestJobTimeoutRoundTripsThreeStates(t *testing.T) {
jobs := []domain.Job{
{ID: 1, Name: "Inherit", TimeoutSeconds: nil},
{ID: 2, Name: "No timeout", TimeoutSeconds: domain.TimeoutSecondsPtr(0)},
{ID: 3, Name: "Own", TimeoutSeconds: domain.TimeoutSecondsPtr(45)},
}
data, err := json.Marshal(domain.JobsFile{Jobs: jobs})
if err != nil {
t.Fatal(err)
}
if want := `"timeout_seconds":0`; !strings.Contains(string(data), want) {
t.Fatalf("explicit zero timeout should be written as %s:\n%s", want, data)
}
var got domain.JobsFile
if err := json.Unmarshal(data, &got); err != nil {
t.Fatal(err)
}
if got.Jobs[0].TimeoutSeconds != nil {
t.Errorf("unset timeout should stay nil, got %d", *got.Jobs[0].TimeoutSeconds)
}
if got.Jobs[1].TimeoutSeconds == nil || *got.Jobs[1].TimeoutSeconds != 0 {
t.Errorf("explicit zero timeout should survive the round trip, got %v", got.Jobs[1].TimeoutSeconds)
}
if got.Jobs[2].TimeoutSeconds == nil || *got.Jobs[2].TimeoutSeconds != 45 {
t.Errorf("per-job timeout should survive the round trip, got %v", got.Jobs[2].TimeoutSeconds)
}
}
func TestJobsJSONDoesNotPersistRuntimeNoise(t *testing.T) { func TestJobsJSONDoesNotPersistRuntimeNoise(t *testing.T) {
// Job carries only durable configuration; runtime state lives in // Job carries only durable configuration; runtime state lives in
// domain.JobRuntime and is never marshalled. This guards against a future // domain.JobRuntime and is never marshalled. This guards against a future
@@ -253,38 +505,43 @@ func TestJobsJSONDoesNotPersistRuntimeNoise(t *testing.T) {
} }
} }
// TestLoadOrCreateJobsMigratesFromLegacy verifies that when jobs.json is absent // TestWriteJSONReplacesFileAtomically pins the durability fix: writeJSON must
// but jobs.yaml exists the jobs are read from the legacy YAML file. // never truncate the destination in place. It writes through a temp file and
func TestLoadOrCreateJobsMigratesFromLegacy(t *testing.T) { // renames over the target, so a reader can never observe a partially written
// file, and an existing file survives untouched if the marshal fails first.
func TestWriteJSONReplacesFileAtomically(t *testing.T) {
dir := t.TempDir() dir := t.TempDir()
jsonPath := filepath.Join(dir, JobsFileName) // jobs.json — not created path := filepath.Join(dir, "gosentry.json")
legacy := yamlJobsFile{ original := domain.DefaultConfig()
Jobs: []yamlJob{ original.LogsDir = "logs-original"
{ID: 10, Name: "Legacy job", Schedule: "@every 5m", Command: "echo legacy", Enabled: true}, if err := writeJSON(path, original); err != nil {
},
}
if err := writeYAML(filepath.Join(dir, legacyYAMLJobsFileName), legacy); err != nil {
t.Fatal(err) t.Fatal(err)
} }
got, err := loadOrCreateJobs(jsonPath) updated := domain.DefaultConfig()
updated.LogsDir = "logs-updated"
if err := writeJSON(path, updated); err != nil {
t.Fatal(err)
}
data, err := os.ReadFile(path)
if err != nil { if err != nil {
t.Fatal(err) t.Fatal(err)
} }
if len(got) != 1 { var got domain.Config
t.Fatalf("expected 1 job, got %d", len(got)) if err := json.Unmarshal(data, &got); err != nil {
t.Fatal(err)
} }
if got[0].ID != 10 { if got.LogsDir != "logs-updated" {
t.Errorf("ID: got %d, want 10", got[0].ID) t.Fatalf("LogsDir = %q, want %q", got.LogsDir, "logs-updated")
} }
if got[0].Name != "Legacy job" {
t.Errorf("Name: got %q, want 'Legacy job'", got[0].Name) entries, err := os.ReadDir(dir)
if err != nil {
t.Fatal(err)
} }
if got[0].Schedule != "@every 5m" { if len(entries) != 1 {
t.Errorf("Schedule: got %q, want '@every 5m'", got[0].Schedule) t.Fatalf("expected only the final file in %s, got %v", dir, entries)
}
if !got[0].Enabled {
t.Errorf("Enabled: got false, want true")
} }
} }
src/ui/history_view.go
+256 -52
View File
@@ -5,10 +5,9 @@ import (
"strings" "strings"
"time" "time"
"gitea.mixdep.ru/mix/gosentry/src/domain"
"fyne.io/fyne/v2" "fyne.io/fyne/v2"
"fyne.io/fyne/v2/container" "fyne.io/fyne/v2/container"
"fyne.io/fyne/v2/theme"
"fyne.io/fyne/v2/widget" "fyne.io/fyne/v2/widget"
) )
@@ -25,90 +24,295 @@ func newEvent(jobID int, jobName string, state string, detail string) event {
} }
} }
func collectActivity(jobs []job, runtimes map[int]*domain.JobRuntime) []event { // textWidth measures how wide s renders at the theme's current body text size.
var events []event func textWidth(s string) float32 {
for _, current := range jobs { return fyne.MeasureText(s, theme.TextSize(), fyne.TextStyle{}).Width
// At startup this is usually empty because jobs.yaml does not persist
// runtime logs. The function still centralizes the merge for future
// history loading from log metadata.
if rt := runtimes[current.ID]; rt != nil {
events = append(events, rt.Logs...)
}
}
sort.SliceStable(events, func(left int, right int) bool {
return events[left].Time < events[right].Time
})
return events
} }
func newHistoryView(events *[]event) *fyne.Container { // cellPadding is the horizontal space a table cell reserves around its text.
// It replaces a hand-tuned pixel constant with the theme's own inner padding
// doubled (one side each), so it follows text size and DPI.
func cellPadding() float32 { return 2 * theme.InnerPadding() }
// textColumnMinWidth/textColumnMaxWidth bound every content-measured History
// column: the minimum keeps a column readable when its values are short or
// absent, the maximum stops one very long value from dominating the table
// (the table still scrolls horizontally past it). Expressed as measured text
// rather than raw pixels so both follow the theme instead of drifting from it.
func textColumnMinWidth() float32 { return textWidth(strings.Repeat("0", 10)) + cellPadding() }
func textColumnMaxWidth() float32 { return textWidth(strings.Repeat("0", 30)) + cellPadding() }
// textColumnWidth measures the widest of samples so a table column can be
// sized to fit its content, clamped to [min, max]. Fyne tables do not
// auto-size columns, so without this a fixed width clips values like
// "20260601-100000_SomeJobName.log" in the Log column.
func textColumnWidth(samples []string, min, max float32) float32 {
width := min
for _, text := range samples {
if text == "" {
continue
}
if w := textWidth(text) + cellPadding(); w > width {
width = w
}
}
if width > max {
width = max
}
return width
}
// historyTriggerSamples is the closed set of Trigger values History ever
// shows (see newEvent and app.operations.go/app.run.go, which produce "UI",
// "Manual" and "Schedule"; historyCellText falls back to "Unknown"). Add a new
// trigger here too if one is introduced there, or the column may clip it.
var historyTriggerSamples = []string{"Schedule", "Manual", "UI", "Unknown"}
// historyStateSamples is the closed set of State values History ever shows:
// "OK" and "Failed" come from runner.RunJob (runStateDetail/startJobOnly);
// "Started", "Error" and "Jobs loaded" are recorded directly in mainwindow.go.
// Add a new state here too if one is introduced in either place.
var historyStateSamples = []string{"OK", "Failed", "Started", "Error", "Jobs loaded"}
// historyTimeSample is the rendered form of the timestamp layout every event
// uses (see newEvent), so the Time column needs no content scan: its width is
// fixed by the format string.
const historyTimeSample = "2026-01-02 15:04:05"
// historyColumnWidths computes every column's width from the current sorted
// rows. Time, Trigger and State are fixed-shape or closed-set columns; Job,
// Detail and Log are free text, so their width tracks the values actually
// present, bounded the same way the Log column always was.
func historyColumnWidths(rows []event) [6]float32 {
var content [3][]string
for i := range content {
content[i] = make([]string, 0, len(rows))
}
for _, current := range rows {
for i, value := range historyContentValues(current) {
content[i] = append(content[i], value)
}
}
min, max := textColumnMinWidth(), textColumnMaxWidth()
widths := [6]float32{
0: textWidth(historyTimeSample) + cellPadding(),
1: textColumnWidth(historyTriggerSamples, min, max),
3: textColumnWidth(historyStateSamples, min, max),
}
for i, col := range historyContentCols {
widths[col] = textColumnWidth(content[i], min, max)
}
return widths
}
// maxHistoryRows caps the session History list, the way app.maxJobLogs caps a
// job's own activity list. History is never persisted and every record carries
// the run's full captured output, so an app left running in the tray — the mode
// GoSentry is designed for — would otherwise hold every record of every run
// forever, and pay a full resort plus a full column-width rescan on each new
// one. One job on @every 10s produces ~8 600 records a day.
const maxHistoryRows = 1000
// historyLog is the session History: the capped record list plus the column
// widths measured from it. It exists so the widths can be folded in one record
// at a time instead of being recomputed from every row on every event, which
// is what made the per-event cost grow with the number of rows.
type historyLog struct {
records []event
widths [6]float32
// textSize and padding are the theme metrics widths were last measured at.
// A theme change invalidates every measurement, so it forces a full rescan
// rather than folding new records into stale numbers.
textSize float32
padding float32
}
func newHistoryLog(records []event) *historyLog {
h := &historyLog{records: trimHistory(records)}
h.rescan()
return h
}
// trimHistory drops the oldest records past the cap. The tail of the backing
// array is zeroed because a dropped record holds the run's whole output, which
// would otherwise stay reachable until the slice happens to be reallocated.
func trimHistory(records []event) []event {
if len(records) <= maxHistoryRows {
return records
}
kept := copy(records, records[len(records)-maxHistoryRows:])
for i := kept; i < len(records); i++ {
records[i] = event{}
}
return records[:kept]
}
// add appends one record and widens any content-measured column the record
// does not fit. Widths only ever grow within a theme: a column is never
// narrowed when a record ages out, because the rows still on screen were laid
// out against the wider value.
func (h *historyLog) add(record event) {
h.records = trimHistory(append(h.records, record))
if h.stale() {
h.rescan()
return
}
min, max := textColumnMinWidth(), textColumnMaxWidth()
for i, value := range historyContentValues(record) {
if width := textColumnWidth([]string{value}, min, max); width > h.widths[historyContentCols[i]] {
h.widths[historyContentCols[i]] = width
}
}
}
// columnWidths returns the widths to apply to the table, rescanning every
// record only when the theme's text metrics have changed since the last scan.
func (h *historyLog) columnWidths() [6]float32 {
if h.stale() {
h.rescan()
}
return h.widths
}
func (h *historyLog) stale() bool {
return theme.TextSize() != h.textSize || cellPadding() != h.padding
}
func (h *historyLog) rescan() {
h.textSize, h.padding = theme.TextSize(), cellPadding()
h.widths = historyColumnWidths(h.records)
}
// historyContentCols are the columns whose width follows the values actually
// present, in the order historyContentValues returns them. Both the
// incremental fold in add and the full scan in historyColumnWidths go through
// this pair, so they cannot disagree about which columns follow content.
var historyContentCols = [3]int{2, 4, 5}
func historyContentValues(record event) [3]string {
return [3]string{record.JobName, record.Detail, logFileName(record.LogFile)}
}
// historyHeader is a bold tappable label used in the History table header row.
// In Fyne 2.7+ OnSelected is not fired for header cells (Row < 0), so the sort
// toggle is wired through the Tappable interface instead.
type historyHeader struct {
widget.BaseWidget
label *widget.Label
OnTapped func()
}
func newHistoryHeader() *historyHeader {
h := &historyHeader{label: widget.NewLabel("")}
h.label.TextStyle = fyne.TextStyle{Bold: true}
h.label.Truncation = fyne.TextTruncateClip
h.ExtendBaseWidget(h)
return h
}
func (h *historyHeader) CreateRenderer() fyne.WidgetRenderer {
return widget.NewSimpleRenderer(h.label)
}
func (h *historyHeader) Tapped(*fyne.PointEvent) {
if h.OnTapped != nil {
h.OnTapped()
}
}
func (h *historyHeader) SetText(text string) {
h.label.SetText(text)
}
// historyHeaders are the History table's column captions, in column order. The
// Time caption is built per update because it carries the sort direction arrow.
var historyHeaders = [...]string{"Time", "Trigger", "Job", "State", "Detail", "Log"}
func newHistoryView(log *historyLog) (*fyne.Container, func()) {
descending := false descending := false
headerText := func(id widget.TableCellID) string { headerText := func(id widget.TableCellID) string {
headers := []string{"Time", "Trigger", "Job", "State", "Detail", "Log"}
if id.Row < 0 && id.Col == 0 { if id.Row < 0 && id.Col == 0 {
if descending { if descending {
return "Time desc" return "Time ▼"
} }
return "Time asc" return "Time ▲"
} }
if id.Row < 0 && id.Col >= 0 && id.Col < len(headers) { if id.Row < 0 && id.Col >= 0 && id.Col < len(historyHeaders) {
return headers[id.Col] return historyHeaders[id.Col]
} }
return "" return ""
} }
sortedEvents := func() []event {
result := append([]event(nil), (*events)...) // rows is the sorted snapshot every callback below reads — both the length
sort.SliceStable(result, func(left int, right int) bool { // callback and the cells, which must agree on the same slice. A full redraw
// issues one update call per visible cell, so sorting inside the cell
// callback re-sorted the whole event list a hundred times per Refresh.
// resort() is therefore the only place the order changes, and it runs once
// per redraw: at build time, on a sort toggle, and from refresh().
var rows []event
resort := func() {
rows = append(rows[:0], log.records...)
sort.SliceStable(rows, func(left int, right int) bool {
if descending { if descending {
return result[left].Time > result[right].Time return rows[left].Time > rows[right].Time
} }
return result[left].Time < result[right].Time return rows[left].Time < rows[right].Time
}) })
return result
} }
resort()
table := widget.NewTable( table := widget.NewTable(
func() (int, int) { func() (int, int) {
return len(*events), 6 return len(rows), len(historyHeaders)
}, },
func() fyne.CanvasObject { func() fyne.CanvasObject {
label := widget.NewLabel("") label := widget.NewLabel("")
label.Wrapping = fyne.TextTruncate label.Truncation = fyne.TextTruncateClip
return label return label
}, },
func(id widget.TableCellID, item fyne.CanvasObject) { func(id widget.TableCellID, item fyne.CanvasObject) {
label := item.(*widget.Label) item.(*widget.Label).SetText(historyCellText(id, rows))
label.SetText(historyCellText(id, sortedEvents()))
label.TextStyle = fyne.TextStyle{}
label.Refresh()
}, },
) )
table.ShowHeaderRow = true table.ShowHeaderRow = true
table.CreateHeader = func() fyne.CanvasObject { table.CreateHeader = func() fyne.CanvasObject {
label := widget.NewLabel("") return newHistoryHeader()
label.Wrapping = fyne.TextTruncate
return label
} }
table.UpdateHeader = func(id widget.TableCellID, item fyne.CanvasObject) { table.UpdateHeader = func(id widget.TableCellID, item fyne.CanvasObject) {
label := item.(*widget.Label) h := item.(*historyHeader)
label.SetText(headerText(id)) h.SetText(headerText(id))
label.TextStyle = fyne.TextStyle{Bold: true} if id.Row < 0 && id.Col == 0 {
label.Refresh() h.OnTapped = func() {
descending = !descending
resort()
table.Refresh()
}
} else {
h.OnTapped = nil
}
h.Refresh()
} }
table.OnSelected = func(id widget.TableCellID) { table.OnSelected = func(id widget.TableCellID) {
if id.Row < 0 && id.Col == 0 {
descending = !descending
table.Refresh()
}
table.Unselect(id) table.Unselect(id)
} }
table.SetColumnWidth(0, 150) setColumnWidths := func() {
table.SetColumnWidth(1, 90) for col, width := range log.columnWidths() {
table.SetColumnWidth(2, 170) table.SetColumnWidth(col, width)
table.SetColumnWidth(3, 90) }
table.SetColumnWidth(4, 260) }
table.SetColumnWidth(5, 240) setColumnWidths()
return container.NewPadded(table)
// refresh re-reads the event list into the sorted snapshot and re-applies
// the column widths before redrawing, so newly recorded events appear in
// the current sort order and longer values widen their column instead of
// being truncated. The widths come from historyLog, which folded each new
// record in as it arrived — this does not rescan every row.
refresh := func() {
resort()
setColumnWidths()
table.Refresh()
}
return container.NewPadded(table), refresh
} }
func historyCellText(id widget.TableCellID, events []event) string { func historyCellText(id widget.TableCellID, events []event) string {
src/ui/history_view_test.go
+367
View File
@@ -0,0 +1,367 @@
package ui
import (
"strconv"
"strings"
"testing"
"time"
"fyne.io/fyne/v2"
"fyne.io/fyne/v2/test"
"fyne.io/fyne/v2/widget"
)
func TestLastJobLogsCapsAndCopies(t *testing.T) {
logs := []event{
{Time: "1", JobName: "a"},
{Time: "2", JobName: "b"},
{Time: "3", JobName: "c"},
{Time: "4", JobName: "d"},
}
got := lastJobLogs(logs)
if len(got) != maxJobActivityRows {
t.Fatalf("len = %d, want %d", len(got), maxJobActivityRows)
}
for i, want := range []string{"1", "2", "3"} {
if got[i].Time != want {
t.Errorf("got[%d].Time = %q, want %q", i, got[i].Time, want)
}
}
logs[0].Time = "mutated"
if got[0].Time == "mutated" {
t.Error("lastJobLogs must return a defensive copy")
}
}
func TestLastJobLogsEmpty(t *testing.T) {
if got := lastJobLogs(nil); len(got) != 0 {
t.Errorf("nil input: got %v, want empty", got)
}
}
func TestIndexOfID(t *testing.T) {
jobs := []job{
{ID: 10, Name: "A"},
{ID: 20, Name: "B"},
}
if got := indexOfID(jobs, 20); got != 1 {
t.Errorf("found: got %d, want 1", got)
}
if got := indexOfID(jobs, 99); got != -1 {
t.Errorf("missing: got %d, want -1", got)
}
if got := indexOfID(nil, 1); got != -1 {
t.Errorf("empty slice: got %d, want -1", got)
}
}
func TestHistoryCellText(t *testing.T) {
events := []event{{
Time: "2026-06-01 12:00:00",
Trigger: "",
JobName: "Job",
State: "OK",
Detail: "done",
LogFile: `/logs/20260601-120000_Job.log`,
}}
cases := []struct {
col int
want string
}{
{0, "2026-06-01 12:00:00"},
{1, "Unknown"},
{2, "Job"},
{3, "OK"},
{4, "done"},
{5, "20260601-120000_Job.log"},
}
for _, tc := range cases {
got := historyCellText(widget.TableCellID{Row: 0, Col: tc.col}, events)
if got != tc.want {
t.Errorf("col %d: got %q, want %q", tc.col, got, tc.want)
}
}
if got := historyCellText(widget.TableCellID{Row: -1, Col: 0}, events); got != "" {
t.Errorf("header row: got %q, want empty", got)
}
if got := historyCellText(widget.TableCellID{Row: 99, Col: 0}, events); got != "" {
t.Errorf("out of range row: got %q, want empty", got)
}
}
func TestLogFileName(t *testing.T) {
cases := []struct{ path, want string }{
{"", ""},
{" ", ""},
{`C:\logs\run.log`, "run.log"},
{"/var/logs/2026/job.log", "job.log"},
{"plain.log", "plain.log"},
}
for _, tc := range cases {
if got := logFileName(tc.path); got != tc.want {
t.Errorf("logFileName(%q) = %q, want %q", tc.path, got, tc.want)
}
}
}
// TestHistorySortToggleKeepsRowsInSync is the regression guard for F11: the
// table now reads one cached sorted snapshot instead of re-sorting inside every
// cell callback, so the length callback and the cells have to be refilled
// together. If either the sort toggle or refresh stops calling resort(), the
// row count and the cell contents disagree — which no compiler check catches.
func TestHistorySortToggleKeepsRowsInSync(t *testing.T) {
testApp := test.NewApp()
defer testApp.Quit()
events := []event{
{Time: "2026-06-01 10:00:00", JobName: "A"},
{Time: "2026-06-01 11:00:00", JobName: "B"},
{Time: "2026-06-01 12:00:00", JobName: "C"},
}
log := newHistoryLog(events)
content, refresh := newHistoryView(log)
table, ok := content.Objects[0].(*widget.Table)
if !ok {
t.Fatal("history view does not wrap a table")
}
rowCount := func() int {
t.Helper()
rows, cols := table.Length()
if cols != len(historyHeaders) {
t.Errorf("column count = %d, want %d", cols, len(historyHeaders))
}
return rows
}
// Column 2 is the Job name, the field these fixtures vary.
jobAt := func(row int) string {
t.Helper()
cell := table.CreateCell()
table.UpdateCell(widget.TableCellID{Row: row, Col: 2}, cell)
return cell.(*widget.Label).Text
}
// The sort toggle lives on the Time header cell, which is only wired up
// when UpdateHeader runs for it.
header := table.CreateHeader()
table.UpdateHeader(widget.TableCellID{Row: -1, Col: 0}, header)
timeHeader, ok := header.(*historyHeader)
if !ok {
t.Fatal("history table header is not a historyHeader")
}
assertOrder := func(when string, want ...string) {
t.Helper()
if got := rowCount(); got != len(want) {
t.Fatalf("%s: row count = %d, want %d", when, got, len(want))
}
for row, name := range want {
if got := jobAt(row); got != name {
t.Errorf("%s: row %d = %q, want %q", when, row, got, name)
}
}
}
assertOrder("ascending", "A", "B", "C")
test.Tap(timeHeader)
assertOrder("descending", "C", "B", "A")
// A new run arrives while the table is sorted newest-first: it must be
// counted and placed in the order currently on screen, not the build-time one.
log.add(event{Time: "2026-06-01 13:00:00", JobName: "D"})
refresh()
assertOrder("descending after refresh", "D", "C", "B", "A")
test.Tap(timeHeader)
assertOrder("ascending after refresh", "A", "B", "C", "D")
}
// TestHistoryCellTemplateIsPlainText guards the dropped per-cell TextStyle
// assignment: the template must already carry the zero style, since nothing
// resets it any more.
func TestHistoryCellTemplateIsPlainText(t *testing.T) {
testApp := test.NewApp()
defer testApp.Quit()
content, _ := newHistoryView(newHistoryLog(nil))
table := content.Objects[0].(*widget.Table)
label, ok := table.CreateCell().(*widget.Label)
if !ok {
t.Fatal("history cell template is not a label")
}
if label.TextStyle != (fyne.TextStyle{}) {
t.Errorf("cell template TextStyle = %+v, want the zero value", label.TextStyle)
}
}
// TestTextColumnWidthClamps covers the three shapes textColumnWidth has to
// handle: a sample narrower than min, one that lands between the bounds, and
// one wide enough to hit the max cap.
func TestTextColumnWidthClamps(t *testing.T) {
testApp := test.NewApp()
defer testApp.Quit()
min, max := float32(50), float32(120)
if got := textColumnWidth([]string{"x"}, min, max); got != min {
t.Errorf("below-min sample: got %v, want the floor %v", got, min)
}
inRange := textWidth("mid-sized value") + cellPadding()
if inRange <= min || inRange >= max {
t.Skip("fixture sample no longer lands strictly between the bounds under this theme")
}
if got := textColumnWidth([]string{"mid-sized value"}, min, max); got != inRange {
t.Errorf("in-range sample: got %v, want %v", got, inRange)
}
if got := textColumnWidth([]string{strings.Repeat("0", 200)}, min, max); got != max {
t.Errorf("above-max sample: got %v, want the cap %v", got, max)
}
if got := textColumnWidth(nil, min, max); got != min {
t.Errorf("no samples: got %v, want the floor %v", got, min)
}
}
// TestHistoryColumnsFitTheirContent guards F6/F14: every column must be at
// least as wide as its widest known or actually-present value, at the default
// theme and at a scaled one, so nothing that used to be a pixel constant
// clips again.
func TestHistoryColumnsFitTheirContent(t *testing.T) {
testApp := test.NewApp()
defer testApp.Quit()
rows := []event{
{
Time: "2026-06-01 12:00:00",
Trigger: "Schedule",
JobName: "A moderately long job name for width testing",
State: "Jobs loaded",
Detail: "A somewhat longer detail message describing what happened",
LogFile: `/logs/20260601-120000_SomeJobName.log`,
},
}
check := func(when string) {
t.Helper()
widths := historyColumnWidths(rows)
samples := [][]string{
{historyTimeSample},
historyTriggerSamples,
{rows[0].JobName},
historyStateSamples,
{rows[0].Detail},
{logFileName(rows[0].LogFile)},
}
min, max := textColumnMinWidth(), textColumnMaxWidth()
for col, colSamples := range samples {
want := textColumnWidth(colSamples, min, max)
if col == 0 {
want = textWidth(historyTimeSample) + cellPadding()
}
if widths[col] < want {
t.Errorf("%s: column %d width = %v, want at least %v", when, col, widths[col], want)
}
}
}
check("default theme")
testApp.Settings().SetTheme(test.NewTheme())
check("scaled theme")
}
// TestHistoryLogCapsRecords is the regression guard for the unbounded History
// list: an app left in the tray records thousands of runs a day, each carrying
// the run's whole captured output, so the list must drop the oldest instead of
// growing forever.
func TestHistoryLogCapsRecords(t *testing.T) {
testApp := test.NewApp()
defer testApp.Quit()
log := newHistoryLog(nil)
for i := 0; i < maxHistoryRows+25; i++ {
log.add(event{Time: "t", JobName: "Job " + strconv.Itoa(i)})
}
if len(log.records) != maxHistoryRows {
t.Fatalf("record count = %d, want capped at %d", len(log.records), maxHistoryRows)
}
if got, want := log.records[0].JobName, "Job 25"; got != want {
t.Errorf("oldest kept record = %q, want %q — the cap must drop from the front", got, want)
}
last := log.records[len(log.records)-1].JobName
if want := "Job " + strconv.Itoa(maxHistoryRows+24); last != want {
t.Errorf("newest record = %q, want %q", last, want)
}
// A list handed in above the cap is trimmed too, not only one grown into it.
oversized := make([]event, maxHistoryRows+10)
if got := len(newHistoryLog(oversized).records); got != maxHistoryRows {
t.Errorf("pre-filled log length = %d, want %d", got, maxHistoryRows)
}
}
// TestHistoryLogWidthsMatchAFullScan pins the incremental column widths: while
// every measured record is still in the list, folding each one in as it
// arrives must give exactly what rescanning every row would, or the cheaper
// path would clip values the old one showed.
func TestHistoryLogWidthsMatchAFullScan(t *testing.T) {
testApp := test.NewApp()
defer testApp.Quit()
log := newHistoryLog(nil)
for _, record := range []event{
{Time: "1", JobName: "A", Detail: "short", LogFile: `/logs/a.log`},
{Time: "2", JobName: "A moderately long job name", Detail: "a longer detail message", LogFile: `/logs/20260601-120000_SomeJobName.log`},
{Time: "3", JobName: "B", Detail: "s", LogFile: `/logs/b.log`},
} {
log.add(record)
}
if got, want := log.columnWidths(), historyColumnWidths(log.records); got != want {
t.Errorf("incremental widths = %v, want the full-scan widths %v", got, want)
}
}
// TestHistoryLogWidthsDoNotShrinkWhenRecordsAgeOut covers the other half of the
// rule: widths only grow. Dropping the record that set a column's width must
// not narrow the column, because the rows on screen were laid out against it.
func TestHistoryLogWidthsDoNotShrinkWhenRecordsAgeOut(t *testing.T) {
testApp := test.NewApp()
defer testApp.Quit()
log := newHistoryLog(nil)
log.add(event{Time: "1", JobName: "A job name long enough to widen its column"})
widest := log.columnWidths()[2]
for i := 0; i < maxHistoryRows; i++ {
log.add(event{Time: "t", JobName: "x"})
}
if got := log.columnWidths()[2]; got != widest {
t.Errorf("Job column width = %v after the wide record aged out, want it held at %v", got, widest)
}
}
// TestHistoryLogRescansOnThemeChange guards the one case the incremental fold
// cannot handle: every stored width was measured at the old text size, so a
// theme change has to fall back to a full rescan.
func TestHistoryLogRescansOnThemeChange(t *testing.T) {
testApp := test.NewApp()
defer testApp.Quit()
log := newHistoryLog([]event{
{Time: "1", JobName: "A moderately long job name", Detail: "a longer detail message"},
})
before := log.columnWidths()
testApp.Settings().SetTheme(test.NewTheme())
after := log.columnWidths()
if after == before {
t.Fatal("widths unchanged after a theme change; the fixture theme must alter text metrics")
}
if want := historyColumnWidths(log.records); after != want {
t.Errorf("widths after theme change = %v, want the rescanned %v", after, want)
}
}
func TestNewEventUsesConsistentTimestampShape(t *testing.T) {
ev := newEvent(1, "Job", "OK", "detail")
if _, err := time.Parse("2006-01-02 15:04:05", ev.Time); err != nil {
t.Errorf("timestamp %q is not in expected layout: %v", ev.Time, err)
}
if ev.Trigger != "UI" || ev.JobID != 1 || ev.JobName != "Job" {
t.Errorf("unexpected event fields: %+v", ev)
}
}
src/ui/job_dialog.go
+43 -3
View File
@@ -2,6 +2,7 @@ package ui
import ( import (
"fmt" "fmt"
"strconv"
"strings" "strings"
"gitea.mixdep.ru/mix/gosentry/src/domain" "gitea.mixdep.ru/mix/gosentry/src/domain"
@@ -13,6 +14,10 @@ import (
"fyne.io/fyne/v2/widget" "fyne.io/fyne/v2/widget"
) )
// overlapPolicyInherit is the display label used when a job should inherit the
// global overlap policy. It maps to an empty Job.OverlapPolicy on save.
const overlapPolicyInherit = "(Use global default)"
// showJobDialog opens a create/edit form for a single job. onSave is called // showJobDialog opens a create/edit form for a single job. onSave is called
// with the populated job only when the user clicks Save and all fields pass // with the populated job only when the user clicks Save and all fields pass
// validation. // validation.
@@ -30,16 +35,32 @@ func showJobDialog(w fyne.Window, title string, current job, onSave func(job)) {
commandEntry.SetPlaceHolder(`C:\Program Files\App\App.exe`) commandEntry.SetPlaceHolder(`C:\Program Files\App\App.exe`)
commandEntry.SetText(current.Command) commandEntry.SetText(current.Command)
commandBrowse := widget.NewButtonWithIcon("Browse", theme.FolderOpenIcon(), func() { commandBrowse := widget.NewButtonWithIcon("Browse", theme.FolderOpenIcon(), func() {
chooseFile(w, commandEntry) chooseFile(w, commandEntry, nil)
}) })
commandRow := container.NewBorder(nil, nil, nil, commandBrowse, commandEntry) commandRow := container.NewBorder(nil, nil, nil, commandBrowse, commandEntry)
argumentsEntry := widget.NewMultiLineEntry() argumentsEntry := widget.NewMultiLineEntry()
argumentsEntry.SetPlaceHolder(`D:\Local\Jobs\Auto.ffs_batch`) // One argument per line is the whole point of the field: each line is passed
// to the process verbatim, so paths with spaces need no quoting.
argumentsEntry.SetPlaceHolder("One argument per line, no quotes:\n--input\n" + `C:\Data\My Files\input.txt`)
argumentsEntry.SetText(current.Arguments) argumentsEntry.SetText(current.Arguments)
startOnly := widget.NewCheck("Start only, do not wait for exit", nil) startOnly := widget.NewCheck("Start only, do not wait for exit", nil)
startOnly.SetChecked(current.StartOnly) startOnly.SetChecked(current.StartOnly)
enabled := widget.NewCheck("Enabled", nil) enabled := widget.NewCheck("Enabled", nil)
enabled.SetChecked(current.Enabled) enabled.SetChecked(current.Enabled)
overlapSelect := widget.NewSelect(
[]string{overlapPolicyInherit, string(domain.OverlapPolicySkip), string(domain.OverlapPolicyQueue)},
nil,
)
overlapSelected := overlapPolicyInherit
if current.OverlapPolicy != "" {
overlapSelected = current.OverlapPolicy
}
overlapSelect.SetSelected(overlapSelected)
timeoutEntry := widget.NewEntry()
timeoutEntry.SetPlaceHolder("Empty = global default, 0 = no timeout")
if current.TimeoutSeconds != nil {
timeoutEntry.SetText(strconv.Itoa(*current.TimeoutSeconds))
}
form := dialog.NewForm( form := dialog.NewForm(
title, title,
@@ -52,6 +73,8 @@ func showJobDialog(w fyne.Window, title string, current job, onSave func(job)) {
widget.NewFormItem("Command", commandRow), widget.NewFormItem("Command", commandRow),
widget.NewFormItem("Arguments", argumentsEntry), widget.NewFormItem("Arguments", argumentsEntry),
widget.NewFormItem("", startOnly), widget.NewFormItem("", startOnly),
widget.NewFormItem("Overlap policy", overlapSelect),
widget.NewFormItem("Timeout (s)", timeoutEntry),
widget.NewFormItem("", enabled), widget.NewFormItem("", enabled),
}, },
func(saved bool) { func(saved bool) {
@@ -68,6 +91,18 @@ func showJobDialog(w fyne.Window, title string, current job, onSave func(job)) {
dialog.ShowError(fmt.Errorf("invalid schedule: %w", err), w) dialog.ShowError(fmt.Errorf("invalid schedule: %w", err), w)
return return
} }
// An empty timeout inherits the global default (nil); an explicit 0
// means "no timeout" and does not inherit; anything else must be a
// positive whole number of seconds.
var timeoutSeconds *int
if trimmed := strings.TrimSpace(timeoutEntry.Text); trimmed != "" {
parsed, err := strconv.Atoi(trimmed)
if err != nil || parsed < 0 {
dialog.ShowError(fmt.Errorf("timeout must be 0 (no timeout) or a positive number of seconds, or empty to use the global default"), w)
return
}
timeoutSeconds = domain.TimeoutSecondsPtr(parsed)
}
current.Name = strings.TrimSpace(name.Text) current.Name = strings.TrimSpace(name.Text)
current.Folder = strings.TrimSpace(folderEntry.Text) current.Folder = strings.TrimSpace(folderEntry.Text)
current.Schedule = strings.TrimSpace(scheduleEntry.Text) current.Schedule = strings.TrimSpace(scheduleEntry.Text)
@@ -75,6 +110,11 @@ func showJobDialog(w fyne.Window, title string, current job, onSave func(job)) {
current.Arguments = strings.TrimSpace(argumentsEntry.Text) current.Arguments = strings.TrimSpace(argumentsEntry.Text)
current.StartOnly = startOnly.Checked current.StartOnly = startOnly.Checked
current.Enabled = enabled.Checked current.Enabled = enabled.Checked
current.OverlapPolicy = overlapSelect.Selected
if current.OverlapPolicy == overlapPolicyInherit {
current.OverlapPolicy = ""
}
current.TimeoutSeconds = timeoutSeconds
// The dialog only edits durable configuration. Runtime status is // The dialog only edits durable configuration. Runtime status is
// initialized (new jobs) or updated (edits) by the caller against the // initialized (new jobs) or updated (edits) by the caller against the
// runtime map, keyed by job ID. // runtime map, keyed by job ID.
@@ -82,6 +122,6 @@ func showJobDialog(w fyne.Window, title string, current job, onSave func(job)) {
}, },
w, w,
) )
form.Resize(fyne.NewSize(640, 460)) form.Resize(fyne.NewSize(640, 500))
form.Show() form.Show()
} }
src/ui/jobs_view.go
+162 -367
View File
@@ -1,9 +1,6 @@
package ui package ui
import ( import (
"fmt"
"strings"
"gitea.mixdep.ru/mix/gosentry/src/app" "gitea.mixdep.ru/mix/gosentry/src/app"
"gitea.mixdep.ru/mix/gosentry/src/domain" "gitea.mixdep.ru/mix/gosentry/src/domain"
@@ -17,7 +14,36 @@ import (
const allFolders = "All" const allFolders = "All"
const noFolder = "No folder" const noFolder = "No folder"
const minJobsSidebarWidth float32 = 480
// maxJobActivityRows caps the "Selected job activity" panel to the most recent
// entries. The full per-job history (up to maxJobLogs) remains in the History
// view; this panel is a quick at-a-glance summary anchored below the output.
const maxJobActivityRows = 3
// jobsView owns the Jobs tab: the widgets, the view-only preferences they draw
// (list mode and the scheduler pause label), and the jobsViewState the widgets
// read. It replaces a single constructor whose dozen closures shared seven
// mutable locals — the state each handler touches is now named on the struct
// rather than captured, and the invariants that used to be maintained by hand in
// five places live on jobsViewState.
type jobsView struct {
w fyne.Window
svc *app.Service
state *jobsViewState
dp *detailsPanel
list *widget.List
folderSelect *widget.Select
viewButton *widget.Button
stopAllButton *widget.Button
schedulerState *widget.Label
// listView and paused mirror Service-owned config so the widgets can be
// relabelled without a round trip. Both are re-read from the Service on every
// refresh; neither is a source of truth.
listView domain.JobListView
paused bool
}
// newJobsView builds the Jobs tab: list sidebar, details panel, and toolbar. // newJobsView builds the Jobs tab: list sidebar, details panel, and toolbar.
// It returns the assembled panel and a refresh function the caller invokes // It returns the assembled panel and a refresh function the caller invokes
@@ -25,387 +51,156 @@ const minJobsSidebarWidth float32 = 480
// in mainwindow.go). The refresh function re-reads the service snapshot and // in mainwindow.go). The refresh function re-reads the service snapshot and
// redraws all widgets in the jobs view; it does NOT touch history or settings. // redraws all widgets in the jobs view; it does NOT touch history or settings.
func newJobsView(w fyne.Window, svc *app.Service) (fyne.CanvasObject, func()) { func newJobsView(w fyne.Window, svc *app.Service) (fyne.CanvasObject, func()) {
jobs := svc.Jobs() config := svc.Config()
runtimes := make(map[int]*domain.JobRuntime, len(jobs)) v := &jobsView{
syncFromService := func() { w: w,
jobs = svc.Jobs() svc: svc,
for id := range runtimes { state: newJobsViewState(svc),
delete(runtimes, id) listView: config.JobListView,
} paused: config.Paused,
for _, current := range jobs {
if rt := svc.Runtime(current.ID); rt != nil {
runtimes[current.ID] = rt
}
}
} }
syncFromService() v.dp = newDetailsPanel(job{}, &domain.JobRuntime{}, config.OverlapPolicy, config.DefaultTimeoutSeconds)
runtimeFor := func(index int) *domain.JobRuntime { v.updateDetails()
if index < 0 || index >= len(jobs) {
return &domain.JobRuntime{} // Build order follows what refresh() touches: the folder select fires its
} // OnChanged from SetSelected below, which refreshes, so every widget that
if rt := runtimes[jobs[index].ID]; rt != nil { // refresh() reaches has to exist by then.
return rt v.list = v.newList()
} v.viewButton = v.newViewToggle()
return &domain.JobRuntime{} globalControls := v.newGlobalControls()
v.folderSelect = v.newFolderSelect()
v.folderSelect.SetSelected(v.state.folder)
v.syncListSelection()
return v.assemble(globalControls), v.refresh
}
// refresh re-reads the Service and redraws the whole view. It is the single
// entry point for "something changed": the toolbar handlers call it after a
// successful operation, and mainwindow's event observer calls it for everything
// else.
func (v *jobsView) refresh() {
v.state.sync()
// The pause state is Service-owned and can change from outside this view, so
// it is re-read here rather than mirrored from the tap handler alone — that is
// what makes this view a consumer of SchedulerStateChanged.
v.applySchedulerState(v.svc.Config().Paused)
// updateDetails already ends in a d.logs.Refresh() (both its update and clear
// paths do), so refreshing the activity list again here would redraw it twice
// per call.
v.updateDetails()
v.list.Refresh()
v.syncListSelection()
}
// updateDetails repopulates the details pane from the current selection.
func (v *jobsView) updateDetails() {
current, ok := v.state.selected()
if !ok {
// A folder filter can temporarily leave no selectable rows. Clearing the
// details panel avoids showing stale information for a hidden job.
v.dp.clear()
return
} }
// Overlap policy and the default timeout are global settings that can change
// from the Settings tab while this view is open, so they are re-read on every
// update rather than captured once at construction.
config := v.svc.Config()
v.dp.update(current, v.state.runtime(current.ID), config.OverlapPolicy, config.DefaultTimeoutSeconds)
}
selected := 0 // syncListSelection points the list's highlight at the selected job. It is what
selectedFolder := allFolders // keeps the highlight and the details pane describing the same job when the row
schedulerPaused := false // a job sits in moves — a job created or deleted above it, a folder filter
filteredJobs := filteredJobIndexes(jobs, selectedFolder) // applied, or a different jobs file adopted. widget.List.Select returns early
// when the row is already highlighted, so calling this on every refresh does not
title := widget.NewLabelWithStyle(jobs[selected].Name, fyne.TextAlignLeading, fyne.TextStyle{Bold: true}) // fight the user's scrolling.
title.Wrapping = fyne.TextWrapBreak func (v *jobsView) syncListSelection() {
folderLabel := newJobDetailLabel(jobs[selected].Folder) row := v.state.displayRow()
scheduleLabel := newJobDetailLabel(jobs[selected].Schedule) if row < 0 {
commandLabel := newJobDetailLabel(jobs[selected].Command) v.list.UnselectAll()
argumentsLabel := newJobDetailLabel(jobs[selected].Arguments) return
runModeLabel := newJobDetailLabel(app.DisplayRunMode(jobs[selected]))
selectedRuntime := runtimeFor(selected)
lastRunLabel := newJobDetailLabel(selectedRuntime.LastRun)
nextRunLabel := newJobDetailLabel(selectedRuntime.NextRun)
stateLabel := newJobDetailLabel(selectedRuntime.LastState)
schedulerState := widget.NewLabel("Scheduler running")
commandOutput := widget.NewTextGrid()
commandOutput.SetText(selectedRuntime.Output)
commandOutputScroll := container.NewScroll(commandOutput)
// Command output can contain long lines and preserved whitespace. TextGrid is
// used instead of Label so stdout/stderr remains readable and does not vanish
// against the theme when it is placed inside a scroll container.
commandOutputScroll.SetMinSize(fyne.NewSize(520, 160))
selectedLogs := append([]event(nil), selectedRuntime.Logs...)
jobLogs := widget.NewList(
func() int { return len(selectedLogs) },
func() fyne.CanvasObject { return widget.NewLabel("log") },
func(id widget.ListItemID, item fyne.CanvasObject) {
item.(*widget.Label).SetText(app.EventText(selectedLogs[id]))
},
)
updateDetails := func(index int) {
if index < 0 || index >= len(jobs) {
// A folder filter can temporarily leave no selectable rows. Clearing
// the details panel avoids showing stale information for a hidden job.
title.SetText("No job selected")
folderLabel.SetText("")
scheduleLabel.SetText("")
commandLabel.SetText("")
argumentsLabel.SetText("")
runModeLabel.SetText("")
lastRunLabel.SetText("")
nextRunLabel.SetText("")
stateLabel.SetText("")
commandOutput.SetText("")
selectedLogs = nil
return
}
selected = index
current := jobs[selected]
rt := runtimeFor(selected)
title.SetText(current.Name)
folderLabel.SetText(app.DisplayFolder(current.Folder))
scheduleLabel.SetText(current.Schedule)
commandLabel.SetText(current.Command)
argumentsLabel.SetText(app.DisplayArguments(current.Arguments))
runModeLabel.SetText(app.DisplayRunMode(current))
lastRunLabel.SetText(rt.LastRun)
nextRunLabel.SetText(rt.NextRun)
stateLabel.SetText(rt.LastState)
commandOutput.SetText(rt.Output)
selectedLogs = append(selectedLogs[:0], rt.Logs...)
} }
v.list.Select(row)
}
// list and folderSelect are declared early so closures below can reference // rebuildFolders re-derives the folder filter's options from the current jobs.
// them before the widget.NewList / widget.NewSelect calls assign the values. // Creating, editing, and deleting a job can all add or remove a folder.
var list *widget.List func (v *jobsView) rebuildFolders() {
var folderSelect *widget.Select v.folderSelect.Options = folderOptions(v.state.jobs)
v.folderSelect.Refresh()
}
refreshView := func() { // assemble puts the sidebar (global controls, folder filter, toolbar, list) and
syncFromService() // the details pane into the master/detail split the tab shows.
filteredJobs = filteredJobIndexes(jobs, selectedFolder) func (v *jobsView) assemble(globalControls fyne.CanvasObject) fyne.CanvasObject {
updateDetails(selected) // The whole filter is one row: caption on the left, view toggle on the right,
jobLogs.Refresh() // select filling what is left. The border layout gives both edges their
if list != nil { // MinSize, so the header is a line shorter than a stacked caption would make it.
list.Refresh() folderCaption := widget.NewLabelWithStyle("Folder", fyne.TextAlignLeading, fyne.TextStyle{Bold: true})
} filterRow := container.NewBorder(nil, nil, folderCaption, v.viewButton, v.folderSelect)
} sidebarHeader := container.NewVBox(globalControls, widget.NewSeparator(), filterRow, v.newToolbar())
sidebar := container.NewBorder(sidebarHeader, nil, nil, nil, v.list)
list = widget.NewList( // A split rather than a Border left slot: the border pinned the sidebar at its
func() int { return len(filteredJobs) }, // MinSize forever, so the user could never trade list width for detail width.
func() fyne.CanvasObject { // The divider lets either pane grow, and neither can be dragged below its own
name := widget.NewLabelWithStyle("Job name", fyne.TextAlignLeading, fyne.TextStyle{Bold: true}) // content minimum.
meta := widget.NewLabel("schedule") panel := container.NewHSplit(sidebar, container.NewPadded(v.dp.container()))
status := widget.NewLabel("status") panel.SetOffset(initialSplitOffset(sidebar.MinSize().Width))
return container.NewVBox(name, meta, status) return panel
}, }
func(id widget.ListItemID, item fyne.CanvasObject) {
row := item.(*fyne.Container)
name := row.Objects[0].(*widget.Label)
meta := row.Objects[1].(*widget.Label)
status := row.Objects[2].(*widget.Label)
current := jobs[filteredJobs[id]] // newFolderSelect builds the folder filter. Selecting a folder narrows the list
name.SetText(current.Name) // and, when the selected job is no longer visible, moves the selection to the
// Keep each row compact: folder, schedule, and command are shown in one // first row that is (see jobsViewState.applyFilter).
// metadata line so the left pane stays useful even with many jobs. func (v *jobsView) newFolderSelect() *widget.Select {
meta.SetText(app.DisplayFolder(current.Folder) + " " + current.Schedule + " " + app.DisplayInvocation(current)) return widget.NewSelect(folderOptions(v.state.jobs), func(value string) {
status.SetText(app.StatusText(current, runtimes[current.ID]))
},
)
list.OnSelected = func(id widget.ListItemID) {
if id < 0 || id >= len(filteredJobs) {
updateDetails(-1)
return
}
updateDetails(filteredJobs[id])
}
list.Select(selected)
folderSelect = widget.NewSelect(folderOptions(jobs), func(value string) {
if value == "" { if value == "" {
return return
} }
selectedFolder = value v.state.applyFilter(value)
filteredJobs = filteredJobIndexes(jobs, selectedFolder) v.refresh()
list.Refresh()
if len(filteredJobs) == 0 {
// The "No folder" filter is intentionally allowed to be empty. It is a
// real filter choice, not an error state, so the selection is cleared.
selected = -1
updateDetails(-1)
return
}
selected = filteredJobs[0]
list.Select(0)
refreshView()
}) })
folderSelect.SetSelected(selectedFolder) }
addButton := widget.NewButtonWithIcon("New job", theme.ContentAddIcon(), func() { // newGlobalControls builds the pause control row that sits above the filter.
showJobDialog(w, "New job", job{Schedule: "@every 1m", Command: "echo GoSentry job ran", Enabled: true}, func(saved job) { func (v *jobsView) newGlobalControls() fyne.CanvasObject {
// The Service assigns the ID, stores the job, records the "Created" v.schedulerState = widget.NewLabel("")
// activity, and emits events. The observer appends those to History; we v.stopAllButton = widget.NewButtonWithIcon("", nil, nil)
// only refresh the snapshot and move the selection to the new job. v.applySchedulerState(v.paused)
created, err := svc.CreateJob(saved) v.stopAllButton.OnTapped = func() {
if err != nil { // SetGlobalPause flips the pause flag, updates every job's next-run text,
dialog.ShowError(err, w) // and emits the activity record the observer logs. refresh re-derives the
return // pause state from the Service, so a failed save leaves the control showing
} // what actually happened.
syncFromService() if err := v.svc.SetGlobalPause(!v.paused); err != nil {
folderSelect.Options = folderOptions(jobs) dialog.ShowError(err, v.w)
folderSelect.Refresh()
targetFolder := filterValue(created.Folder)
if selectedFolder != allFolders && selectedFolder != targetFolder {
selectedFolder = targetFolder
folderSelect.SetSelected(targetFolder)
}
selected = indexOfID(jobs, created.ID)
filteredJobs = filteredJobIndexes(jobs, selectedFolder)
list.Refresh()
list.Select(app.DisplayIndex(filteredJobs, selected))
refreshView()
})
})
editButton := widget.NewButtonWithIcon("Edit", theme.DocumentCreateIcon(), func() {
if selected < 0 || selected >= len(jobs) {
return return
} }
showJobDialog(w, "Edit job", jobs[selected], func(saved job) { v.refresh()
// The job keeps its ID, so the Service preserves the runtime (keyed by
// ID), reflects any enabled/disabled change, recomputes the next run, and
// emits the "Updated" activity the observer records.
saved.ID = jobs[selected].ID
if err := svc.UpdateJob(saved); err != nil {
dialog.ShowError(err, w)
return
}
syncFromService()
folderSelect.Options = folderOptions(jobs)
folderSelect.Refresh()
list.Refresh()
refreshView()
})
})
runButton := widget.NewButtonWithIcon("Run now", theme.MediaPlayIcon(), func() {
if selected < 0 || selected >= len(jobs) {
return
}
if schedulerPaused {
// The global pause is treated as an emergency stop for all execution,
// including manual "Run now", so the user has one reliable switch.
dialog.ShowInformation("Scheduler paused", "Global pause is active. Resume the scheduler before running jobs.", w)
return
}
// RunNow refuses an already-running job (it returns an error); the UI has
// always ignored that case silently, so the run simply does not start.
if err := svc.RunNow(jobs[selected].ID); err != nil {
return
}
list.Refresh()
refreshView()
})
stopAllButton := widget.NewButtonWithIcon("Pause all", theme.MediaStopIcon(), nil)
stopAllButton.OnTapped = func() {
// SetGlobalPause flips the Service's pause flag, updates every job's
// next-run text, and emits the activity record the observer logs. Mirror the
// new state into the local flag and the controls; revert it if the save fails.
schedulerPaused = !schedulerPaused
if err := svc.SetGlobalPause(schedulerPaused); err != nil {
schedulerPaused = !schedulerPaused
dialog.ShowError(err, w)
return
}
if schedulerPaused {
schedulerState.SetText("Scheduler paused")
stopAllButton.SetText("Resume all")
stopAllButton.SetIcon(theme.MediaPlayIcon())
} else {
schedulerState.SetText("Scheduler running")
stopAllButton.SetText("Pause all")
stopAllButton.SetIcon(theme.MediaStopIcon())
}
list.Refresh()
refreshView()
} }
pauseButton := widget.NewButtonWithIcon("Pause", theme.MediaPauseIcon(), func() { // The row sits directly under the tab bar with no AppTabs inset, while the
if selected < 0 || selected >= len(jobs) { // default VBox gap below it is one theme padding — add the same on top so
return // the button is not flush against the tabs.
} return container.New(
// SetEnabled toggles the job, updates its runtime/next-run, and records the layout.NewCustomPaddedLayout(theme.Padding(), 0, 0, 0),
// "Resumed"/"Paused" activity the observer logs. container.NewHBox(v.stopAllButton, v.schedulerState, layout.NewSpacer()),
current := jobs[selected]
if err := svc.SetEnabled(current.ID, !current.Enabled); err != nil {
dialog.ShowError(err, w)
return
}
syncFromService()
list.Refresh()
refreshView()
})
deleteButton := widget.NewButtonWithIcon("Delete", theme.DeleteIcon(), func() {
if selected < 0 || selected >= len(jobs) {
return
}
deleted := jobs[selected]
// Deletion is confirmed because jobs can represent real system actions.
// There is no undo yet, so accidental removal should require one more click.
dialog.ShowConfirm("Delete job", fmt.Sprintf("Delete %q?", deleted.Name), func(confirm bool) {
if !confirm {
return
}
// The Service removes the job and its runtime, persists, and records the
// "Deleted" activity the observer logs; the UI re-reads the snapshot and
// fixes up the folder filter and selection.
if err := svc.DeleteJob(deleted.ID); err != nil {
dialog.ShowError(err, w)
return
}
syncFromService()
folderSelect.Options = folderOptions(jobs)
folderSelect.Refresh()
filteredJobs = filteredJobIndexes(jobs, selectedFolder)
if len(filteredJobs) == 0 && selectedFolder != allFolders {
selectedFolder = allFolders
folderSelect.SetSelected(allFolders)
filteredJobs = filteredJobIndexes(jobs, selectedFolder)
}
if len(filteredJobs) == 0 {
selected = -1
} else {
selected = filteredJobs[0]
}
list.Refresh()
if selected >= 0 {
list.Select(app.DisplayIndex(filteredJobs, selected))
}
refreshView()
}, w)
})
toolbar := container.NewHBox(addButton, editButton, runButton, pauseButton, deleteButton, layout.NewSpacer())
globalControls := container.NewHBox(stopAllButton, schedulerState, layout.NewSpacer())
sidebarHeader := container.NewVBox(globalControls, widget.NewSeparator(), widget.NewLabelWithStyle("Folder", fyne.TextAlignLeading, fyne.TextStyle{Bold: true}), folderSelect, toolbar)
sidebar := container.NewBorder(sidebarHeader, nil, nil, nil, list)
details := container.NewVBox(
title,
widget.NewSeparator(),
detailRow("Folder", folderLabel),
detailRow("Schedule", scheduleLabel),
detailRow("Command", commandLabel),
detailRow("Arguments", argumentsLabel),
detailRow("Run mode", runModeLabel),
detailRow("Last run", lastRunLabel),
detailRow("Next run", nextRunLabel),
detailRow("State", stateLabel),
widget.NewSeparator(),
widget.NewLabelWithStyle("Command output", fyne.TextAlignLeading, fyne.TextStyle{Bold: true}),
commandOutputScroll,
widget.NewSeparator(),
widget.NewLabelWithStyle("Selected job activity", fyne.TextAlignLeading, fyne.TextStyle{Bold: true}),
jobLogs,
) )
fixedSidebar := container.New(minWidthLayout{width: minJobsSidebarWidth}, sidebar)
panel := container.NewBorder(nil, nil, fixedSidebar, nil, container.NewPadded(details))
return panel, refreshView
} }
// applySchedulerState is the one place that draws the pause control and its
func filteredJobIndexes(jobs []job, folder string) []int { // status text from a pause value, so refresh can drive it from whatever the
indexes := make([]int, 0, len(jobs)) // Service reports instead of only the tap handler mirroring its own toggle.
for index, current := range jobs { func (v *jobsView) applySchedulerState(paused bool) {
if folder == allFolders || filterValue(current.Folder) == folder { v.paused = paused
indexes = append(indexes, index) if paused {
} v.schedulerState.SetText("Scheduler paused")
v.stopAllButton.SetText("Enable auto")
v.stopAllButton.SetIcon(theme.MediaPlayIcon())
return
} }
return indexes v.schedulerState.SetText("Scheduler running")
} v.stopAllButton.SetText("Disable auto")
v.stopAllButton.SetIcon(theme.MediaPauseIcon())
func folderOptions(jobs []job) []string {
// "All" and "No folder" are always present so the filter UI is stable even
// before the user creates folders.
options := []string{allFolders, noFolder}
seen := map[string]bool{allFolders: true, noFolder: true}
for _, current := range jobs {
folder := strings.TrimSpace(current.Folder)
if folder == "" || seen[folder] {
continue
}
seen[folder] = true
options = append(options, folder)
}
return options
}
func filterValue(folder string) string {
if strings.TrimSpace(folder) == "" {
return noFolder
}
return strings.TrimSpace(folder)
}
func indexOfID(jobs []job, id int) int {
for index, current := range jobs {
if current.ID == id {
return index
}
}
return 0
}
func detailRow(label string, value fyne.CanvasObject) fyne.CanvasObject {
caption := widget.NewLabelWithStyle(label, fyne.TextAlignLeading, fyne.TextStyle{Bold: true})
caption.Wrapping = fyne.TextTruncate
return container.NewGridWithColumns(2, caption, value)
}
func newJobDetailLabel(text string) *widget.Label {
label := widget.NewLabel(text)
// Job names, commands, and paths can be much wider than the details panel.
// Breaking long runs of text keeps Label.MinSize stable when the selection
// changes, so the right panel does not force the whole window to resize.
label.Wrapping = fyne.TextWrapBreak
return label
} }
src/ui/jobs_view_details.go
+224
View File
@@ -0,0 +1,224 @@
package ui
import (
"gitea.mixdep.ru/mix/gosentry/src/app"
"gitea.mixdep.ru/mix/gosentry/src/domain"
"fyne.io/fyne/v2"
"fyne.io/fyne/v2/container"
"fyne.io/fyne/v2/layout"
"fyne.io/fyne/v2/theme"
"fyne.io/fyne/v2/widget"
)
// detailsPanel holds all widgets in the job details pane and knows how to
// assemble, populate, and clear them. Extracting it here keeps newJobsView
// focused on list, toolbar, and layout wiring without embedding 100+ lines of
// widget construction and update logic.
type detailsPanel struct {
title *widget.Label
folder *widget.Label
schedule *widget.Label
command *widget.Label
arguments *widget.Label
runMode *widget.Label
overlapPolicy *widget.Label
timeout *widget.Label
lastRun *widget.Label
nextRun *widget.Label
state *widget.Label
stats *widget.Label
commandOutput *widget.TextGrid
commandOutputScroll *container.Scroll
logs *widget.List
selectedLogs []event
}
func newDetailsPanel(firstJob job, rt *domain.JobRuntime, globalOverlapPolicy domain.OverlapPolicy, globalTimeout int) *detailsPanel {
d := &detailsPanel{
title: widget.NewLabelWithStyle("", fyne.TextAlignLeading, fyne.TextStyle{Bold: true}),
folder: newJobDetailLabel(""),
schedule: newJobDetailLabel(""),
command: newJobDetailLabel(""),
arguments: newJobDetailLabel(""),
runMode: newJobDetailLabel(""),
overlapPolicy: newJobDetailLabel(""),
timeout: newJobDetailLabel(""),
lastRun: newJobDetailLabel(""),
nextRun: newJobDetailLabel(""),
state: newJobDetailLabel(""),
stats: newJobDetailLabel(""),
commandOutput: widget.NewTextGrid(),
}
d.title.Wrapping = fyne.TextWrapBreak
d.commandOutputScroll = container.NewScroll(d.commandOutput)
// Command output can contain long lines and preserved whitespace. TextGrid is
// used instead of Label so stdout/stderr remains readable and does not vanish
// against the theme when it is placed inside a scroll container.
// The height here is only a floor: the scroll grows to fill whatever space the
// border layout gives it, so keep the minimum small so the whole window can be
// shrunk on short (720p) screens. Long output stays reachable by scrolling.
// The width, unlike the height, is load-bearing outside this widget: it is the
// details pane's widest minimum, so it is also what keeps the metadata value
// column non-empty — captionValueLayout hands the value whatever is left after
// the caption and has no floor of its own (see its comment in layout.go).
// Lowering it narrows those values with nothing to warn about it; the user can
// only widen them, by dragging the jobs split divider left.
d.commandOutputScroll.SetMinSize(fyne.NewSize(460, 70))
d.logs = widget.NewList(
func() int { return len(d.selectedLogs) },
func() fyne.CanvasObject {
l := widget.NewLabel("log")
l.Truncation = fyne.TextTruncateClip
return l
},
func(id widget.ListItemID, item fyne.CanvasObject) {
item.(*widget.Label).SetText(app.EventLine(d.selectedLogs[id]))
},
)
d.update(firstJob, rt, globalOverlapPolicy, globalTimeout)
return d
}
func (d *detailsPanel) update(j job, rt *domain.JobRuntime, globalOverlapPolicy domain.OverlapPolicy, globalTimeout int) {
d.title.SetText(j.Name)
d.folder.SetText(app.DisplayFolder(j.Folder))
d.schedule.SetText(j.Schedule)
d.command.SetText(j.Command)
d.arguments.SetText(app.DisplayArguments(j.Arguments))
d.runMode.SetText(app.DisplayRunMode(j))
d.overlapPolicy.SetText(app.DisplayOverlapPolicy(j, globalOverlapPolicy))
d.timeout.SetText(app.DisplayTimeout(j, globalTimeout))
d.lastRun.SetText(rt.LastRun)
d.nextRun.SetText(rt.NextRun)
d.state.SetText(rt.LastState)
d.stats.SetText(app.DisplayStats(rt))
d.commandOutput.SetText(rt.Output)
d.selectedLogs = lastJobLogs(rt.Logs)
// The activity list renders d.selectedLogs but, unlike the labels above whose
// SetText refreshes them, only its backing slice changed. Refresh it here so
// switching jobs immediately redraws the panel instead of keeping stale rows.
d.logs.Refresh()
}
func (d *detailsPanel) clear() {
d.title.SetText("No job selected")
d.folder.SetText("")
d.schedule.SetText("")
d.command.SetText("")
d.arguments.SetText("")
d.runMode.SetText("")
d.overlapPolicy.SetText("")
d.timeout.SetText("")
d.lastRun.SetText("")
d.nextRun.SetText("")
d.state.SetText("")
d.stats.SetText("")
d.commandOutput.SetText("")
d.selectedLogs = nil
d.logs.Refresh()
}
// detailRowSpec pairs a metadata caption with the widget that shows its value.
// metadataRows and container derive both the caption column width and the row
// layout from this single list, so a row added to one is never forgotten in
// the other.
type detailRowSpec struct {
caption string
value fyne.CanvasObject
}
// metadataRows lists the details pane's metadata rows in display order. It is
// the single source both the caption width measurement and the row layout in
// container() read, so a twelfth row added here cannot silently go unmeasured
// or unlaid-out the way two separately maintained lists could.
func (d *detailsPanel) metadataRows() []detailRowSpec {
return []detailRowSpec{
{"Folder", d.folder},
{"Schedule", d.schedule},
{"Command", d.command},
{"Arguments", d.arguments},
{"Run mode", d.runMode},
{"Overlap policy", d.overlapPolicy},
{"Timeout", d.timeout},
{"State", d.state},
{"Last run", d.lastRun},
{"Next run", d.nextRun},
{"Statistics", d.stats},
}
}
// container assembles the details pane layout: metadata rows pin to the top,
// the activity panel pins to the bottom, and command output fills the remainder.
func (d *detailsPanel) container() fyne.CanvasObject {
// Metadata is laid out in two columns so the block stays half as tall,
// keeping the details pane usable on 720p screens where a single column of
// ten rows pushes the minimum window height past the available space.
specs := d.metadataRows()
captions := make([]string, len(specs))
for i, spec := range specs {
captions[i] = spec.caption
}
capW := captionColumnWidth(captions...)
rowObjects := make([]fyne.CanvasObject, 0, (len(specs)+1)/2)
for i := 0; i+1 < len(specs); i += 2 {
rowObjects = append(rowObjects, detailRowPair(capW, specs[i].caption, specs[i].value, specs[i+1].caption, specs[i+1].value))
}
// An odd row count leaves one caption without a partner (Statistics, today);
// it falls through to a single-column row rather than being paired with
// nothing.
if len(specs)%2 == 1 {
last := specs[len(specs)-1]
rowObjects = append(rowObjects, detailRow(capW, last.caption, last.value))
}
rows := container.New(layout.NewCustomPaddedVBoxLayout(rowOverlap()), rowObjects...)
top := container.NewVBox(
d.title,
widget.NewSeparator(),
rows,
widget.NewSeparator(),
widget.NewLabelWithStyle("Command output", fyne.TextAlignLeading, fyne.TextStyle{Bold: true}),
)
activity := container.NewVBox(
widget.NewSeparator(),
widget.NewLabelWithStyle("Selected job activity", fyne.TextAlignLeading, fyne.TextStyle{Bold: true}),
container.New(fixedHeightLayout{height: activityRowsHeight(maxJobActivityRows)}, d.logs),
)
return container.NewBorder(top, activity, nil, nil, d.commandOutputScroll)
}
// activityRowsHeight returns the fixed height needed to show the given number of
// activity-list rows without scrolling. It mirrors widget.List's own content
// height — (itemHeight + padding) per row, less one separator — using the same
// label template the list builds its rows from, so it tracks the theme's text
// size and DPI instead of relying on a hand-tuned constant. The trailing pixel
// absorbs sub-pixel rounding so the last row is never clipped behind a scrollbar.
func activityRowsHeight(rows int) float32 {
sample := widget.NewLabel("log")
sample.Truncation = fyne.TextTruncateClip
itemHeight := sample.MinSize().Height
padding := theme.Padding()
return (itemHeight+padding)*float32(rows) - padding + 1
}
// detailRowPair places two label/value pairs side by side, producing the
// four-column caption|value|caption|value rows the compact metadata grid uses.
func detailRowPair(captionWidth float32, l1 string, v1 fyne.CanvasObject, l2 string, v2 fyne.CanvasObject) fyne.CanvasObject {
return container.NewGridWithColumns(2, detailRow(captionWidth, l1, v1), detailRow(captionWidth, l2, v2))
}
func detailRow(captionWidth float32, label string, value fyne.CanvasObject) fyne.CanvasObject {
caption := widget.NewLabelWithStyle(label, fyne.TextAlignLeading, fyne.TextStyle{Bold: true})
caption.Truncation = fyne.TextTruncateClip
// A fixed caption width (rather than an even split) means widening the window
// feeds the extra space to the value, not the short caption.
return container.New(captionValueLayout{captionWidth: captionWidth}, caption, value)
}
func newJobDetailLabel(text string) *widget.Label {
label := widget.NewLabel(text)
label.Truncation = fyne.TextTruncateClip
return label
}
src/ui/jobs_view_helpers.go
+81
View File
@@ -0,0 +1,81 @@
package ui
import (
"strings"
"gitea.mixdep.ru/mix/gosentry/src/domain"
)
// lastJobLogs returns a fresh slice of the most recent activity entries for the
// "Selected job activity" panel. Logs are stored newest-first (see
// app.prependLog), so the leading entries are the latest; the result is
// capped at maxJobActivityRows.
func lastJobLogs(logs []event) []event {
n := len(logs)
if n > maxJobActivityRows {
n = maxJobActivityRows
}
return append([]event(nil), logs[:n]...)
}
func filteredJobIndexes(jobs []job, folder string) []int {
indexes := make([]int, 0, len(jobs))
for index, current := range jobs {
if folder == allFolders || filterValue(current.Folder) == folder {
indexes = append(indexes, index)
}
}
return indexes
}
func folderOptions(jobs []job) []string {
// "All" and "No folder" are always present so the filter UI is stable even
// before the user creates folders.
options := []string{allFolders, noFolder}
seen := map[string]bool{allFolders: true, noFolder: true}
for _, current := range jobs {
folder := strings.TrimSpace(current.Folder)
if folder == "" || seen[folder] {
continue
}
seen[folder] = true
options = append(options, folder)
}
return options
}
func filterValue(folder string) string {
if strings.TrimSpace(folder) == "" {
return noFolder
}
return strings.TrimSpace(folder)
}
// nextJobListView returns the mode the view toggle switches to. Anything that
// is not compact reads as detailed, so unknown and legacy values flip to
// compact just as an explicit "detailed" does.
func nextJobListView(current domain.JobListView) domain.JobListView {
if current.IsCompact() {
return domain.JobListViewDetailed
}
return domain.JobListViewCompact
}
// viewToggleText labels the view toggle with the action it performs, not the
// current state — the same convention as the "Disable auto"/"Enable auto"
// button. It also keeps the on-disk strings away from the user.
func viewToggleText(current domain.JobListView) string {
if current.IsCompact() {
return "Detailed"
}
return "Compact"
}
func indexOfID(jobs []job, id int) int {
for index, current := range jobs {
if current.ID == id {
return index
}
}
return -1
}
src/ui/jobs_view_list.go
+114
View File
@@ -0,0 +1,114 @@
package ui
import (
"gitea.mixdep.ru/mix/gosentry/src/app"
"gitea.mixdep.ru/mix/gosentry/src/domain"
"fyne.io/fyne/v2"
"fyne.io/fyne/v2/container"
"fyne.io/fyne/v2/dialog"
"fyne.io/fyne/v2/layout"
"fyne.io/fyne/v2/theme"
"fyne.io/fyne/v2/widget"
)
// newList builds the sidebar's job list. Rows are drawn from jobsViewState's
// filtered view, so the row index the widget reports is a position in the
// filter, never an index into the job snapshot.
func (v *jobsView) newList() *widget.List {
list := widget.NewList(
func() int { return len(v.state.filtered) },
func() fyne.CanvasObject {
name := widget.NewLabelWithStyle("Job name", fyne.TextAlignLeading, fyne.TextStyle{Bold: true})
// Truncating stops a long name from pushing the compact row's status
// off the right-hand edge. Labels default to TextWrapOff, which grows
// the widget to fit instead.
name.Truncation = fyne.TextTruncateClip
inlineStatus := widget.NewLabel("status")
meta := widget.NewLabel("schedule")
status := widget.NewLabel("status")
v.applyRowMode(inlineStatus, meta, status)
nameLine := container.NewBorder(nil, nil, nil, inlineStatus, name)
return container.New(layout.NewCustomPaddedVBoxLayout(rowOverlap()), nameLine, meta, status)
},
func(id widget.ListItemID, item fyne.CanvasObject) {
current, ok := v.state.jobAt(int(id))
if !ok {
return
}
row := item.(*fyne.Container)
// NewBorder keeps the center object first and appends the border slots
// after it, so nameLine is [name, inlineStatus].
nameLine := row.Objects[0].(*fyne.Container)
name := nameLine.Objects[0].(*widget.Label)
inlineStatus := nameLine.Objects[1].(*widget.Label)
meta := row.Objects[1].(*widget.Label)
status := row.Objects[2].(*widget.Label)
name.SetText(current.Name)
// Keep each row compact: folder, schedule, and command are shown in one
// metadata line so the left pane stays useful even with many jobs.
meta.SetText(app.DisplayFolder(current.Folder) + " " + current.Schedule + " " + app.DisplayInvocation(current))
statusText := app.StatusText(current, v.state.runtime(current.ID))
status.SetText(statusText)
inlineStatus.SetText(statusText)
// A full Refresh reuses rows built under the previous mode, so
// visibility cannot be left to the create callback alone.
v.applyRowMode(inlineStatus, meta, status)
},
)
list.OnSelected = func(id widget.ListItemID) {
v.state.selectRow(int(id))
v.updateDetails()
}
return list
}
// applyRowMode expresses the current view mode as visibility on the row's
// four labels. widget.List caches the row template's MinSize, and
// list.Refresh() re-creates the template and recomputes it, so hiding lines
// is what actually shrinks the rows: layout.NewCustomPaddedVBoxLayout and the
// border layout both skip hidden children when measuring.
func (v *jobsView) applyRowMode(inlineStatus, meta, status fyne.CanvasObject) {
if v.listView.IsCompact() {
inlineStatus.Show()
meta.Hide()
status.Hide()
return
}
inlineStatus.Hide()
meta.Show()
status.Show()
}
// newViewToggle builds the compact/detailed switch that sits at the right edge
// of the filter row.
func (v *jobsView) newViewToggle() *widget.Button {
button := widget.NewButtonWithIcon(viewToggleText(v.listView), viewToggleIcon(v.listView), nil)
button.OnTapped = func() {
next := nextJobListView(v.listView)
v.listView = next
if err := v.svc.SetJobListView(next); err != nil {
// Roll the mode back and leave the button as it was, so the button
// never claims a preference that did not reach disk.
v.listView = nextJobListView(next)
dialog.ShowError(err, v.w)
return
}
button.SetText(viewToggleText(v.listView))
button.SetIcon(viewToggleIcon(v.listView))
// Refresh re-creates the row template, which is what recomputes the
// cached row height for the new mode. Selection is untouched.
v.list.Refresh()
}
return button
}
// viewToggleIcon pairs with viewToggleText: both name the action the button
// performs, not the state it is in, matching stopAllButton's convention.
func viewToggleIcon(current domain.JobListView) fyne.Resource {
if current.IsCompact() {
return theme.ViewFullScreenIcon()
}
return theme.ListIcon()
}
src/ui/jobs_view_state.go
+156
View File
@@ -0,0 +1,156 @@
package ui
import (
"gitea.mixdep.ru/mix/gosentry/src/app"
"gitea.mixdep.ru/mix/gosentry/src/domain"
)
// jobsViewState is the model behind the Jobs tab: the snapshot of the Service's
// jobs and runtimes, the folder filter, and the selection. The widgets in
// jobsView read it and never keep a second copy of any of it.
//
// The selection is a job ID, not an index into the snapshot. Every path that
// changes the job list replaces that snapshot underneath the view — create,
// delete, and edit do it from this view's own handlers, but adopting a different
// jobs file does it from the Service, and the view only learns about it through
// the refresh that JobsLoaded triggers. An index that outlives its snapshot then
// points at whichever job happens to sit there now, so the details pane
// describes one job while the list highlights another. Indexes are derived from
// the ID at render time instead (selectedIndex, displayRow).
type jobsViewState struct {
svc *app.Service
jobs []job
runtimes map[int]*domain.JobRuntime
folder string
// selectedID is 0 when nothing is selected; job IDs start at 1.
selectedID int
// filtered holds the indexes into jobs that the folder filter shows, in list
// row order: filtered[row] is the index of the job drawn in that row.
filtered []int
}
func newJobsViewState(svc *app.Service) *jobsViewState {
s := &jobsViewState{
svc: svc,
runtimes: map[int]*domain.JobRuntime{},
folder: allFolders,
}
s.sync()
return s
}
// sync re-reads the Service snapshot, re-applies the folder filter, and
// re-resolves the selection against the new list. It is the only place the view
// reads job state from the Service.
func (s *jobsViewState) sync() {
s.jobs = s.svc.Jobs()
clear(s.runtimes)
for _, current := range s.jobs {
if rt := s.svc.Runtime(current.ID); rt != nil {
s.runtimes[current.ID] = rt
}
}
s.filtered = filteredJobIndexes(s.jobs, s.folder)
s.resolveSelection()
}
// applyFilter switches the folder filter, keeping the current selection when the
// new filter still shows it. A filter that matches nothing — "No folder" with no
// such job — is a real filter choice, not an error state, so it simply leaves
// nothing selected.
func (s *jobsViewState) applyFilter(folder string) {
s.folder = folder
s.filtered = filteredJobIndexes(s.jobs, s.folder)
if !s.visible(s.selectedID) {
s.selectedID = 0
}
s.resolveSelection()
}
// resolveSelection drops a selection whose job is gone and falls back to the
// first visible row, so the details pane never describes a job the current
// snapshot no longer holds.
func (s *jobsViewState) resolveSelection() {
if s.selectedID != 0 && indexOfID(s.jobs, s.selectedID) < 0 {
s.selectedID = 0
}
if s.selectedID == 0 && len(s.filtered) > 0 {
s.selectedID = s.jobs[s.filtered[0]].ID
}
}
// selectByID records the selection directly, for handlers that know the job they
// want selected (a newly created job, for instance) rather than its row.
func (s *jobsViewState) selectByID(id int) {
s.selectedID = id
}
// selectRow records the selection from a list row, which is what widget.List
// reports through OnSelected.
func (s *jobsViewState) selectRow(row int) {
current, ok := s.jobAt(row)
if !ok {
s.selectedID = 0
return
}
s.selectedID = current.ID
}
// selected returns the selected job, or false when nothing is selected.
func (s *jobsViewState) selected() (job, bool) {
index := s.selectedIndex()
if index < 0 {
return job{}, false
}
return s.jobs[index], true
}
// selectedIndex resolves the selected ID to an index into the current snapshot,
// or -1 when nothing is selected.
func (s *jobsViewState) selectedIndex() int {
if s.selectedID == 0 {
return -1
}
return indexOfID(s.jobs, s.selectedID)
}
// displayRow maps the selection onto a list row, or -1 when nothing is selected
// or the filter hides the selected job — so a caller unselects rather than
// highlighting an unrelated row.
func (s *jobsViewState) displayRow() int {
index := s.selectedIndex()
if index < 0 || !s.visible(s.selectedID) {
return -1
}
return app.DisplayIndex(s.filtered, index)
}
// jobAt returns the job drawn in the given list row.
func (s *jobsViewState) jobAt(row int) (job, bool) {
if row < 0 || row >= len(s.filtered) {
return job{}, false
}
return s.jobs[s.filtered[row]], true
}
// runtime returns a job's runtime, or an empty one when the Service has none
// yet, so callers can read it without a nil check.
func (s *jobsViewState) runtime(id int) *domain.JobRuntime {
if rt := s.runtimes[id]; rt != nil {
return rt
}
return &domain.JobRuntime{}
}
// visible reports whether the folder filter shows the given job.
func (s *jobsViewState) visible(id int) bool {
if id == 0 {
return false
}
for _, index := range s.filtered {
if s.jobs[index].ID == id {
return true
}
}
return false
}
src/ui/jobs_view_state_test.go
+198
View File
@@ -0,0 +1,198 @@
package ui
import (
"testing"
"gitea.mixdep.ru/mix/gosentry/src/app"
"gitea.mixdep.ru/mix/gosentry/src/domain"
)
// newStateForTest builds a jobsViewState over a Service holding the given jobs.
// No Fyne app is needed: the state is the view's model and touches no widgets.
func newStateForTest(t *testing.T, jobs []domain.Job) (*jobsViewState, *app.Service) {
t.Helper()
svc := app.NewService(newTestStore(t), jobs)
t.Cleanup(svc.Stop)
return newJobsViewState(svc), svc
}
func threeJobs() []domain.Job {
return []domain.Job{
{ID: 1, Name: "First", Folder: "Maintenance", Schedule: "@every 1m", Command: "echo one", Enabled: true},
{ID: 2, Name: "Second", Schedule: "@every 2m", Command: "echo two", Enabled: true},
{ID: 3, Name: "Third", Folder: "Reports", Schedule: "@every 3m", Command: "echo three", Enabled: true},
}
}
func selectedName(t *testing.T, s *jobsViewState) string {
t.Helper()
current, ok := s.selected()
if !ok {
return ""
}
return current.Name
}
// TestJobsViewStateSelectsTheFirstJob pins the opening state: the first row is
// selected so the details pane is never blank when there is something to show.
func TestJobsViewStateSelectsTheFirstJob(t *testing.T) {
s, _ := newStateForTest(t, threeJobs())
if got := selectedName(t, s); got != "First" {
t.Errorf("selected job = %q, want %q", got, "First")
}
if got := s.displayRow(); got != 0 {
t.Errorf("displayRow = %d, want 0", got)
}
}
func TestJobsViewStateEmptyListSelectsNothing(t *testing.T) {
s, _ := newStateForTest(t, nil)
if _, ok := s.selected(); ok {
t.Error("an empty job list should leave nothing selected")
}
if got := s.displayRow(); got != -1 {
t.Errorf("displayRow with nothing selected = %d, want -1", got)
}
}
// TestJobsViewStateSelectionFollowsTheJobNotTheRow is the regression guard for
// the selection defect: the selection is a job ID, so a job removed above the
// selected one must not slide the selection onto its neighbour. The deletion
// goes through the Service rather than the Delete button, which is how the view
// learns about a job list that changed underneath it (a different jobs file
// adopted, or any other broad JobChanged).
func TestJobsViewStateSelectionFollowsTheJobNotTheRow(t *testing.T) {
s, svc := newStateForTest(t, threeJobs())
s.selectRow(2)
if got := selectedName(t, s); got != "Third" {
t.Fatalf("selected job after selecting row 2 = %q, want %q", got, "Third")
}
if err := svc.DeleteJob(1); err != nil {
t.Fatalf("DeleteJob: %v", err)
}
s.sync()
if got := selectedName(t, s); got != "Third" {
t.Errorf("selected job after the first job was removed = %q, want it still on %q", got, "Third")
}
if got := s.displayRow(); got != 1 {
t.Errorf("displayRow = %d, want the row %q moved to (1)", got, "Third")
}
}
// TestJobsViewStateDropsSelectionWhenItsJobIsGone covers the other half: a
// selected job that no longer exists falls back to the first visible row instead
// of describing whichever job inherited its position.
func TestJobsViewStateDropsSelectionWhenItsJobIsGone(t *testing.T) {
s, svc := newStateForTest(t, threeJobs())
s.selectRow(1)
if err := svc.DeleteJob(2); err != nil {
t.Fatalf("DeleteJob: %v", err)
}
s.sync()
if got := selectedName(t, s); got != "First" {
t.Errorf("selected job after deleting the selected one = %q, want the fallback %q", got, "First")
}
}
func TestJobsViewStateApplyFilter(t *testing.T) {
s, _ := newStateForTest(t, threeJobs())
// The selected job is in the folder being filtered to, so it stays selected.
s.selectRow(2)
s.applyFilter("Reports")
if got := selectedName(t, s); got != "Third" {
t.Errorf("selection after filtering to its own folder = %q, want %q", got, "Third")
}
if got := s.displayRow(); got != 0 {
t.Errorf("displayRow inside the filter = %d, want 0", got)
}
// Filtering to a folder that hides it moves the selection to the first row
// that folder does show.
s.applyFilter("Maintenance")
if got := selectedName(t, s); got != "First" {
t.Errorf("selection after filtering it away = %q, want %q", got, "First")
}
// "No folder" matches the one job without one.
s.applyFilter(noFolder)
if got := selectedName(t, s); got != "Second" {
t.Errorf("selection under the %q filter = %q, want %q", noFolder, got, "Second")
}
s.applyFilter(allFolders)
if got := len(s.filtered); got != 3 {
t.Errorf("rows under %q = %d, want 3", allFolders, got)
}
}
// TestJobsViewStateEmptyFilterSelectsNothing pins that a filter matching no job
// is a filter choice, not an error state: nothing is selected, and nothing is
// highlighted either.
func TestJobsViewStateEmptyFilterSelectsNothing(t *testing.T) {
s, _ := newStateForTest(t, []domain.Job{
{ID: 1, Name: "First", Folder: "Maintenance", Schedule: "@every 1m", Command: "echo one", Enabled: true},
})
s.applyFilter(noFolder)
if _, ok := s.selected(); ok {
t.Error("a filter that matches nothing should leave nothing selected")
}
if got := s.displayRow(); got != -1 {
t.Errorf("displayRow under an empty filter = %d, want -1", got)
}
// The selection comes back when the filter does.
s.applyFilter(allFolders)
if got := selectedName(t, s); got != "First" {
t.Errorf("selection after clearing the filter = %q, want %q", got, "First")
}
}
// TestJobsViewStateHiddenSelectionIsNotHighlighted covers the case the list
// widget cannot express: the selected job still exists but the filter hides it,
// so there is no row to highlight and displayRow must say so rather than fall
// back to row 0.
func TestJobsViewStateHiddenSelectionIsNotHighlighted(t *testing.T) {
s, _ := newStateForTest(t, threeJobs())
s.applyFilter("Maintenance")
// Selecting by ID is how the create handler points the view at a job it just
// made; here it reaches the state a hidden-but-selected job would be in.
s.selectByID(3)
if s.visible(3) {
t.Fatal("job 3 should be hidden by the Maintenance filter")
}
if got := s.displayRow(); got != -1 {
t.Errorf("displayRow for a hidden selection = %d, want -1", got)
}
if got := selectedName(t, s); got != "Third" {
t.Errorf("selected job = %q, want it still %q", got, "Third")
}
}
func TestJobsViewStateRuntimeIsNeverNil(t *testing.T) {
s, _ := newStateForTest(t, threeJobs())
if rt := s.runtime(99); rt == nil {
t.Error("runtime for an unknown job returned nil, want an empty runtime")
}
}
func TestJobsViewStateJobAtRejectsRowsOutsideTheFilter(t *testing.T) {
s, _ := newStateForTest(t, threeJobs())
s.applyFilter("Reports")
if current, ok := s.jobAt(0); !ok || current.Name != "Third" {
t.Errorf("jobAt(0) = (%q, %v), want (%q, true)", current.Name, ok, "Third")
}
if _, ok := s.jobAt(1); ok {
t.Error("jobAt past the last filtered row should report no job")
}
if _, ok := s.jobAt(-1); ok {
t.Error("jobAt(-1) should report no job")
}
}
src/ui/jobs_view_test.go
+492 -30
View File
@@ -1,9 +1,18 @@
package ui package ui
import ( import (
"encoding/json"
"os"
"path/filepath"
"testing" "testing"
"gitea.mixdep.ru/mix/gosentry/src/app"
"gitea.mixdep.ru/mix/gosentry/src/domain" "gitea.mixdep.ru/mix/gosentry/src/domain"
"fyne.io/fyne/v2"
"fyne.io/fyne/v2/container"
"fyne.io/fyne/v2/test"
"fyne.io/fyne/v2/widget"
) )
func TestFilterValue(t *testing.T) { func TestFilterValue(t *testing.T) {
@@ -30,8 +39,8 @@ func TestFolderOptionsAlwaysIncludesSentinels(t *testing.T) {
func TestFolderOptionsAppendsUniqueFolders(t *testing.T) { func TestFolderOptionsAppendsUniqueFolders(t *testing.T) {
jobs := []domain.Job{ jobs := []domain.Job{
{Folder: "Maintenance"}, {Folder: "Maintenance"},
{Folder: ""}, // no folder → not a named folder {Folder: ""}, // no folder → not a named folder
{Folder: " Backups "}, // trimmed to "Backups" {Folder: " Backups "}, // trimmed to "Backups"
{Folder: "Maintenance"}, // duplicate → not added again {Folder: "Maintenance"}, // duplicate → not added again
} }
opts := folderOptions(jobs) opts := folderOptions(jobs)
@@ -50,46 +59,499 @@ func TestFolderOptionsAppendsUniqueFolders(t *testing.T) {
} }
} }
func TestFilteredJobIndexesAll(t *testing.T) { func TestFilteredJobIndexes(t *testing.T) {
jobs := []domain.Job{
{Folder: "Maintenance"},
{Folder: ""},
{Folder: "Reports"},
}
got := filteredJobIndexes(jobs, allFolders)
if len(got) != 3 {
t.Errorf("allFolders filter: got %d indexes, want 3", len(got))
}
}
func TestFilteredJobIndexesByNamedFolder(t *testing.T) {
jobs := []domain.Job{ jobs := []domain.Job{
{Folder: "Maintenance"}, // index 0 {Folder: "Maintenance"}, // index 0
{Folder: ""}, // index 1 {Folder: ""}, // index 1 — no folder
{Folder: "Maintenance"}, // index 2 {Folder: "Maintenance"}, // index 2
{Folder: "Reports"}, // index 3 {Folder: "Reports"}, // index 3
{Folder: " "}, // index 4 — blank reads as no folder
} }
got := filteredJobIndexes(jobs, "Maintenance") cases := []struct {
if len(got) != 2 || got[0] != 0 || got[1] != 2 { name string
t.Errorf("Maintenance filter: got %v, want [0 2]", got) jobs []domain.Job
filter string
want []int
}{
{"all folders", jobs, allFolders, []int{0, 1, 2, 3, 4}},
{"named folder", jobs, "Maintenance", []int{0, 2}},
{"no folder", jobs, noFolder, []int{1, 4}},
{"empty job list", nil, allFolders, nil},
}
for _, tc := range cases {
got := filteredJobIndexes(tc.jobs, tc.filter)
if !sameIndexes(got, tc.want) {
t.Errorf("%s: filteredJobIndexes(_, %q) = %v, want %v", tc.name, tc.filter, got, tc.want)
}
} }
} }
func TestFilteredJobIndexesNoFolder(t *testing.T) { func sameIndexes(got, want []int) bool {
if len(got) != len(want) {
return false
}
for i := range got {
if got[i] != want[i] {
return false
}
}
return true
}
func TestNextJobListViewFlipsBothWays(t *testing.T) {
cases := []struct {
current, want domain.JobListView
}{
{domain.JobListViewDetailed, domain.JobListViewCompact},
{domain.JobListViewCompact, domain.JobListViewDetailed},
// Empty and unknown values read as detailed, so they flip to compact.
{"", domain.JobListViewCompact},
{"tiny", domain.JobListViewCompact},
}
for _, tc := range cases {
if got := nextJobListView(tc.current); got != tc.want {
t.Errorf("nextJobListView(%q) = %q, want %q", tc.current, got, tc.want)
}
}
}
// findFirst walks a widget tree depth-first and returns the first object the
// match function accepts. Tests use it to reach widgets newJobsView builds
// internally rather than returning.
func findFirst(root fyne.CanvasObject, match func(fyne.CanvasObject) bool) fyne.CanvasObject {
if match(root) {
return root
}
container, ok := root.(*fyne.Container)
if !ok {
return nil
}
for _, child := range container.Objects {
if found := findFirst(child, match); found != nil {
return found
}
}
return nil
}
// jobsSplit returns the view's master/detail split. newJobsView assembles the
// panel as container.NewHSplit(sidebar, details), so the two panes are reached
// through Leading and Trailing.
func jobsSplit(t *testing.T, content fyne.CanvasObject) *container.Split {
t.Helper()
split, ok := content.(*container.Split)
if !ok {
t.Fatal("jobs view is not the expected Split container")
}
return split
}
// jobsSidebar narrows the search to the left pane. The details panel has a
// widget.List of its own (the activity log), so a search from the whole view
// would find the wrong one.
func jobsSidebar(t *testing.T, content fyne.CanvasObject) fyne.CanvasObject {
t.Helper()
return jobsSplit(t, content).Leading
}
func jobsList(t *testing.T, content fyne.CanvasObject) *widget.List {
t.Helper()
found := findFirst(jobsSidebar(t, content), func(o fyne.CanvasObject) bool {
_, ok := o.(*widget.List)
return ok
})
if found == nil {
t.Fatal("jobs sidebar contains no list widget")
}
return found.(*widget.List)
}
// jobsToolbar finds the add/edit/run/pause/delete button row inside the
// sidebar, identified by its first child being the "New job" button.
func jobsToolbar(t *testing.T, content fyne.CanvasObject) fyne.CanvasObject {
t.Helper()
found := findFirst(jobsSidebar(t, content), func(o fyne.CanvasObject) bool {
wrapper, ok := o.(*fyne.Container)
if !ok || len(wrapper.Objects) == 0 {
return false
}
button, ok := wrapper.Objects[0].(*widget.Button)
return ok && button.Text == "New job"
})
if found == nil {
t.Fatal("jobs sidebar has no toolbar row")
}
return found
}
// jobsToolbarButton returns the toolbar button with the given caption.
func jobsToolbarButton(t *testing.T, content fyne.CanvasObject, text string) *widget.Button {
t.Helper()
found := findFirst(jobsToolbar(t, content), func(o fyne.CanvasObject) bool {
button, ok := o.(*widget.Button)
return ok && button.Text == text
})
if found == nil {
t.Fatalf("jobs toolbar has no %q button", text)
}
return found.(*widget.Button)
}
// jobsDetails narrows the search to the right pane (see jobsSidebar).
func jobsDetails(t *testing.T, content fyne.CanvasObject) fyne.CanvasObject {
t.Helper()
return jobsSplit(t, content).Trailing
}
// jobsDetailsActivity returns the "Selected job activity" list, the only
// widget.List in the details pane.
func jobsDetailsActivity(t *testing.T, content fyne.CanvasObject) *widget.List {
t.Helper()
found := findFirst(jobsDetails(t, content), func(o fyne.CanvasObject) bool {
_, ok := o.(*widget.List)
return ok
})
if found == nil {
t.Fatal("details pane has no activity list")
}
return found.(*widget.List)
}
// jobsDetailsTitle reads the details pane's heading, which detailsPanel builds
// as the first bold label in the pane.
func jobsDetailsTitle(t *testing.T, content fyne.CanvasObject) string {
t.Helper()
found := findFirst(jobsDetails(t, content), func(o fyne.CanvasObject) bool {
label, ok := o.(*widget.Label)
return ok && label.TextStyle.Bold
})
if found == nil {
t.Fatal("details pane has no title label")
}
return found.(*widget.Label).Text
}
func jobsViewToggle(t *testing.T, content fyne.CanvasObject) *widget.Button {
t.Helper()
found := findFirst(jobsSidebar(t, content), func(o fyne.CanvasObject) bool {
button, ok := o.(*widget.Button)
return ok && (button.Text == "Compact" || button.Text == "Detailed")
})
if found == nil {
t.Fatal("jobs sidebar has no view toggle button")
}
return found.(*widget.Button)
}
// TestJobListViewToggleShrinksRowsAndPersists is the end-to-end guard for the
// compact view: one tap must shrink the list rows, relabel the button with the
// opposite action, and reach the config — and toggling back must undo all
// three. Row height is measured through List.CreateItem/UpdateItem because
// that is exactly what widget.List caches as the row height.
func TestJobListViewToggleShrinksRowsAndPersists(t *testing.T) {
testApp := test.NewApp()
defer testApp.Quit()
w := testApp.NewWindow("test")
defer w.Close()
store := newTestStore(t)
jobs := []domain.Job{ jobs := []domain.Job{
{Folder: "Maintenance"}, // index 0 — excluded {ID: 1, Name: "Nightly backup", Folder: "Maintenance", Schedule: "@every 1m", Command: "echo hi", Enabled: true},
{Folder: ""}, // index 1 — no folder → included
{Folder: " "}, // index 2 — blank → included
} }
got := filteredJobIndexes(jobs, noFolder) svc := app.NewService(store, jobs)
if len(got) != 2 || got[0] != 1 || got[1] != 2 { defer svc.Stop()
t.Errorf("noFolder filter: got %v, want [1 2]", got)
content, _ := newJobsView(w, svc)
w.SetContent(content)
list := jobsList(t, content)
viewButton := jobsViewToggle(t, content)
if viewButton.Text != "Compact" {
t.Fatalf("a default config should open detailed: button text = %q, want %q", viewButton.Text, "Compact")
}
rowHeight := func() float32 {
t.Helper()
row := list.CreateItem()
list.UpdateItem(0, row)
return row.MinSize().Height
}
detailedHeight := rowHeight()
test.Tap(viewButton)
if store.Config.JobListView != domain.JobListViewCompact {
t.Errorf("after tapping, Config.JobListView = %q, want %q", store.Config.JobListView, domain.JobListViewCompact)
}
if viewButton.Text != "Detailed" {
t.Errorf("after tapping, button text = %q, want %q", viewButton.Text, "Detailed")
}
compactHeight := rowHeight()
if compactHeight >= detailedHeight {
t.Errorf("compact row height = %v, want less than detailed %v", compactHeight, detailedHeight)
}
test.Tap(viewButton)
if store.Config.JobListView != domain.JobListViewDetailed {
t.Errorf("after tapping back, Config.JobListView = %q, want %q", store.Config.JobListView, domain.JobListViewDetailed)
}
if viewButton.Text != "Compact" {
t.Errorf("after tapping back, button text = %q, want %q", viewButton.Text, "Compact")
}
if got := rowHeight(); got != detailedHeight {
t.Errorf("row height after switching back = %v, want the original %v", got, detailedHeight)
} }
} }
func TestFilteredJobIndexesEmptySlice(t *testing.T) { // TestJobListViewCompactConfigOpensCompact checks the persisted preference is
got := filteredJobIndexes(nil, allFolders) // honoured at build time, not just after a tap.
if len(got) != 0 { func TestJobListViewCompactConfigOpensCompact(t *testing.T) {
t.Errorf("empty job list should return empty indexes, got %v", got) testApp := test.NewApp()
defer testApp.Quit()
w := testApp.NewWindow("test")
defer w.Close()
store := newTestStore(t)
store.Config.JobListView = domain.JobListViewCompact
svc := app.NewService(store, nil)
defer svc.Stop()
content, _ := newJobsView(w, svc)
w.SetContent(content)
if got := jobsViewToggle(t, content).Text; got != "Detailed" {
t.Errorf("button text for a compact config = %q, want %q", got, "Detailed")
}
}
// TestJobsSidebarWidthIsItsContent is the regression guard for F7: nothing
// but the sidebar's own content (here, the toolbar row) should impose a
// width floor on it.
func TestJobsSidebarWidthIsItsContent(t *testing.T) {
testApp := test.NewApp()
defer testApp.Quit()
w := testApp.NewWindow("test")
defer w.Close()
store := newTestStore(t)
svc := app.NewService(store, nil)
defer svc.Stop()
content, _ := newJobsView(w, svc)
w.SetContent(content)
sidebarWidth := jobsSidebar(t, content).MinSize().Width
toolbarWidth := jobsToolbar(t, content).MinSize().Width
if sidebarWidth != toolbarWidth {
t.Errorf("sidebar MinSize().Width = %v, want it to equal the toolbar row's %v", sidebarWidth, toolbarWidth)
}
}
// TestJobsSplitOpensAtTheSidebarWidth is the guard for the derived initial
// offset (F15): at the default window width the divider must open at the
// sidebar's own width — enough that the toolbar is never born clipped, and no
// more, since every extra pixel is taken from the details pane. Split's own
// clamp guarantees the lower bound, so the upper bound is what actually proves
// the offset was derived rather than left at the 0.5 default.
func TestJobsSplitOpensAtTheSidebarWidth(t *testing.T) {
testApp := test.NewApp()
defer testApp.Quit()
w := testApp.NewWindow("test")
defer w.Close()
store := newTestStore(t)
svc := app.NewService(store, nil)
defer svc.Stop()
content, _ := newJobsView(w, svc)
w.SetContent(content)
split := jobsSplit(t, content)
split.Resize(fyne.NewSize(defaultWindowWidth, defaultWindowHeight))
want := split.Leading.MinSize().Width
got := split.Leading.Size().Width
// One pixel of slack for the float32 round trip through the offset ratio.
if got < want || got > want+1 {
t.Errorf("leading pane opens at %v, want its content minimum %v", got, want)
}
if trailing := split.Trailing.Size().Width; trailing < split.Trailing.MinSize().Width {
t.Errorf("trailing pane opens at %v, below its minimum %v", trailing, split.Trailing.MinSize().Width)
}
}
// TestToolbarButtonRedrawsRowAndDetails is the regression guard for F12: the
// toolbar handlers no longer re-read the service or refresh the list
// themselves, so jobsView.refresh alone has to re-snapshot the jobs and repopulate
// the details pane. If it ever stops doing either, the row renders a stale
// status and the details lose the selection — neither is a compile error.
func TestToolbarButtonRedrawsRowAndDetails(t *testing.T) {
testApp := test.NewApp()
defer testApp.Quit()
w := testApp.NewWindow("test")
defer w.Close()
store := newTestStore(t)
jobs := []domain.Job{
{ID: 1, Name: "First", Schedule: "@every 1m", Command: "echo one", Enabled: true},
{ID: 2, Name: "Second", Schedule: "@every 2m", Command: "echo two", Enabled: true},
}
svc := app.NewService(store, jobs)
defer svc.Stop()
content, _ := newJobsView(w, svc)
w.SetContent(content)
list := jobsList(t, content)
// Row layout: VBox(nameLine, meta, status), nameLine = Border(name, inlineStatus).
rowText := func(id int) (name string, status string) {
t.Helper()
row := list.CreateItem().(*fyne.Container)
list.UpdateItem(id, row)
nameLine := row.Objects[0].(*fyne.Container)
return nameLine.Objects[0].(*widget.Label).Text, row.Objects[2].(*widget.Label).Text
}
activity := jobsDetailsActivity(t, content)
list.Select(1)
if got := jobsDetailsTitle(t, content); got != "Second" {
t.Fatalf("details title after selecting row 1 = %q, want %q", got, "Second")
}
if _, status := rowText(1); status == "Paused" {
t.Fatal("the second job should start enabled")
}
if got := activity.Length(); got != 0 {
t.Fatalf("activity rows before the tap = %d, want 0", got)
}
test.Tap(jobsToolbarButton(t, content, "Pause"))
if svc.Jobs()[1].Enabled {
t.Fatal("tapping Pause did not reach the service")
}
name, status := rowText(1)
if name != "Second" || status != "Paused" {
t.Errorf("row 1 after Pause = (%q, %q), want (%q, %q)", name, status, "Second", "Paused")
}
if got := jobsDetailsTitle(t, content); got != "Second" {
t.Errorf("details title after Pause = %q, want the selection kept at %q", got, "Second")
}
// The pause writes an activity record. Seeing it here is what proves
// refreshView repopulated the details pane rather than leaving the panel on
// the snapshot it held before the tap.
if got := activity.Length(); got != 1 {
t.Errorf("activity rows after the tap = %d, want the pause record", got)
}
}
// TestJobsViewSelectionSurvivesAJobsFileSwitch is the view-level regression
// guard for the selection defect. Adopting a different jobs file replaces the
// whole list from the Service; the view only hears about it through the refresh
// that JobsLoaded triggers, which is exactly what this test calls. With the
// selection held as a row index, that refresh redrew the details pane from the
// old index — describing whichever job now sat there, or clearing the pane when
// the new list was shorter — while the list's highlight stayed where it was.
func TestJobsViewSelectionSurvivesAJobsFileSwitch(t *testing.T) {
testApp := test.NewApp()
defer testApp.Quit()
w := testApp.NewWindow("test")
defer w.Close()
store := newTestStore(t)
svc := app.NewService(store, []domain.Job{
{ID: 1, Name: "First", Schedule: "@every 1m", Command: "echo one", Enabled: true},
{ID: 2, Name: "Second", Schedule: "@every 2m", Command: "echo two", Enabled: true},
{ID: 3, Name: "Third", Schedule: "@every 3m", Command: "echo three", Enabled: true},
})
defer svc.Stop()
content, refresh := newJobsView(w, svc)
w.SetContent(content)
list := jobsList(t, content)
list.Select(2)
if got := jobsDetailsTitle(t, content); got != "Third" {
t.Fatalf("details title after selecting row 2 = %q, want %q", got, "Third")
}
// A second jobs file with different jobs and different IDs, so nothing about
// the old selection can resolve into the new list.
other := []domain.Job{
{ID: 10, Name: "Alpha", Schedule: "@every 1m", Command: "echo alpha", Enabled: true},
{ID: 11, Name: "Beta", Schedule: "@every 2m", Command: "echo beta", Enabled: true},
}
payload, err := json.Marshal(domain.JobsFile{Jobs: other})
if err != nil {
t.Fatalf("marshal jobs: %v", err)
}
if err := os.WriteFile(filepath.Join(store.Paths.AppDir, "other.json"), payload, 0o644); err != nil {
t.Fatalf("write jobs file: %v", err)
}
config := svc.Config()
config.JobsFile = "other.json"
if err := svc.UpdateSettings(config); err != nil {
t.Fatalf("UpdateSettings: %v", err)
}
refresh()
if got := jobsDetailsTitle(t, content); got != "Alpha" {
t.Errorf("details title after the switch = %q, want the first job of the new file %q", got, "Alpha")
}
if got := list.Length(); got != len(other) {
t.Fatalf("list length after the switch = %d, want %d", got, len(other))
}
// widget.List.Select returns without calling OnSelected when the row is
// already highlighted, so a silent Select(0) is what proves the highlight and
// the details pane are describing the same job.
reselected := false
inner := list.OnSelected
list.OnSelected = func(id widget.ListItemID) {
reselected = true
inner(id)
}
defer func() { list.OnSelected = inner }()
list.Select(0)
if reselected {
t.Error("row 0 was not the highlighted row after the switch, so the highlight and the details pane disagree")
}
}
// TestDetailCaptionWidthCoversEveryCaption is the guard that makes the single
// metadataRows list self-enforcing (F10): every caption it returns must
// measure no wider than captionColumnWidth's result for that same list, or a
// row added to metadataRows without updating the width measurement would
// silently truncate.
func TestDetailCaptionWidthCoversEveryCaption(t *testing.T) {
testApp := test.NewApp()
defer testApp.Quit()
d := newDetailsPanel(job{}, &domain.JobRuntime{}, domain.OverlapPolicySkip, 0)
specs := d.metadataRows()
captions := make([]string, len(specs))
for i, spec := range specs {
captions[i] = spec.caption
}
capW := captionColumnWidth(captions...)
for _, c := range captions {
if w := widget.NewLabelWithStyle(c, fyne.TextAlignLeading, fyne.TextStyle{Bold: true}).MinSize().Width; w > capW {
t.Errorf("caption %q measures %v, wider than captionColumnWidth's %v", c, w, capW)
}
}
}
func TestViewToggleTextNamesTheAction(t *testing.T) {
cases := []struct {
current domain.JobListView
want string
}{
{domain.JobListViewDetailed, "Compact"},
{domain.JobListViewCompact, "Detailed"},
{"", "Compact"},
{"tiny", "Compact"},
}
for _, tc := range cases {
if got := viewToggleText(tc.current); got != tc.want {
t.Errorf("viewToggleText(%q) = %q, want %q", tc.current, got, tc.want)
}
} }
} }

Some files were not shown because too many files have changed in this diff Show More