selfpost

225 Commits 1 Branch 3 Tags

3 Commits

Include renames

Author	SHA1	Message	Date
mixandClaude Opus 5.5	cad1182150	audit 2c: what only the stand could answer, measured and written down test / test (push) Canceled after 0s Details All 2026-10-15; each written beside the code or text it settles. - A-43: /usr/sbin/postlog is -rwxr-xr-x root:root in the image (postfix 3.7.11-0+deb12u1; dpkg-statoverride lists postdrop and postqueue only): Debian does not install it set-gid, so it is no use to dmarc-ingest (cmd/panel/dmarc_ingest.go). - C-X1: OpenSSL 3.0.22 in the image prints the same public key from `x509 -pubkey` and `pkey -pubout` for RSA-2048, P-256, P-384 and a SEC1 P-256 key - cert-reload's same_pair holds for certbot's ECDSA keys. - C-K5, D-guide:933/:233: on the live server (Docker 29.6.1, userland proxy on 0.0.0.0 and ::, no IPv6 on the network) an outside IPv4 client and the host's own public IPv4 address are logged as themselves; the host's IPv6 address and 127.0.0.1 arrive as 172.18.0.1. Over IPv6 every client is the gateway: one level-1 budget, an application IP list cannot name them, rspamd sees the gateway. Guide paragraph under level 1, notes at the milter and allow-list, comments at the anvil setup and authip.go, and a Security entry in the CHANGELOG (an allow-list naming the gateway would admit every IPv6 client). - D-guide:61: a published port nothing listens on (a throwaway container, -p 20999:25) is refused from outside over IPv4 and from the host's public IPv4, accepted and closed through 127.0.0.1 - Docker's proxy, which IPv6 goes through too (not probed over IPv6 for this). - C-M8: the live installation has received one DMARC report, of one record: nothing to set maxReportRecords by yet - said at the constant. - D-S7, D-arch:516, D-arch:532: a new database filled through the store to 120 days at 1 900 messages a day (228 000 messages, 1.37 million lines, 464 MB) on the test server (2 cores): the longest write is the line prune after a 30-day gap, 1.9 s for 342 000 lines (0.4 s with nothing to delete); the send-log delete 0.6 s; 2 000 lines of a tailer pass 18 ms; VACUUM INTO 1.7 s; a second connection writing every 50 ms waited 1.8 s at most, no SQLITE_BUSY - inside busy_timeout's 5 s. architecture.md's "about a second per million lines" was five times too fast; its "six to ten lines of 200 bytes" is 6.0 lines of 146 bytes on the live data. - D-B16: which favicon is fetched, by the probe server's log: Edge 155 the SVG, the desktop app's embedded Chromium 152 the PNG, with or without sizes="any" - layout.html's "vector wins where supported, raster catches the rest" holds; Firefox and Safari not measured. - D-arch:121: the allow/deny trial again, in rspamd/rspamd:3.11.1-3 with today's multimap.conf: every mix of allow and deny entries matching one message ended reject; a changed map was used about 10 s later. - D-sec:424: rspamd runs as _rspamd, uid 11333; the panel is uid 999. Stand: go vet and go test ./... pass on the server (24 packages); make e2e exit 0. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-10-15 02:14:58 +03:00
mixandClaude Opus 5.5	5f86457848	milter: the level-2 limit and the client IP list hold for every message Security fix, outside the inbound antispam feature. Found by its technical review (Opus, 2026-10-12), reproduced on the test stand before the fix: over an application's level-2 limit, two MAIL FROM on one connection were answered 451 and then accepted. Cause. Postfix introduces a client to a milter once per connection. The milter library (go-milter 0.4.1, session.go) replaces the milter's session after any reply that is not "continue" - a refusal, or the accept that used to end a message. The new session never saw Connect, so it had no client address, and both checks passed a message without one: overLimit returned early ("no client IP to key on") and authIPAllowed did the same. So every message after the first on a connection, and every MAIL FROM after a refused one, skipped the level-2 limit and an application's client IP list. In the code since 1.9.0 for the list and longer for the limit. Fix. - build/postfix-config.sh: milter_mail_macros carries {client_addr}, so the address comes with every MAIL FROM; MailFrom reads it (both spellings of IPv6) in the journal milter and the inbound journal milter. - overLimit no longer asks for a client address: a ceiling is on a domain or an application. - authIPAllowed refuses an application that has a client IP list when no address is known. - Body replies "continue" in both milters, which lets the message through as "accept" did and keeps the session. The inbound journal milter had the same cause with a smaller effect: rows of a connection's later messages had no client address. In the same file, the checks of INBOUND_ANTISPAM_MILTER and INBOUND_JOURNAL_MILTER_SOCKET refuse any character outside their set first: a glob's "*" matched anything after the first characters. Tests: a session that never saw Connect is judged by the macro, a listed and an unlisted address, no address, not an address; the limit with no client address; the inbound milter answers only "continue". test/e2e sends two MAIL FROM on one connection over the limit and wants both refused. Checked on the test server: e2e red before the fix on exactly that check, green after; go vet ./... ok, go test ./... ok (22 packages). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-10-12 07:51:50 +03:00
mix	7b8685d038	release: 1.9.0: Per-application client IP allow-list and rate-limit overrides Application sending controls: client IP allow-list for authorization, and level-2 rate limits that override the domain ceiling per application. Added: - Per-application client IP allow-list on the domain page: when enabled, - SQLite migration `0009_application_auth_ips.sql` (moves legacy trusted IPs Changed: - Application level-2 rate limit overrides the domain limit for that login - Domain export/import carries `auth_ip_restrict` / `auth_allowed_ips`; legacy - Panel help, Settings, and [guide.md](docs/guide.md) describe override semantics - [guide.md](docs/guide.md): full-backup section documents all four capture Full detail: CHANGELOG.md (1.9.0).	2026-09-22 15:24:53 +03:00

Author

SHA1

Message

Date

mixandClaude Opus 5.5

cad1182150

audit 2c: what only the stand could answer, measured and written down

test / test (push) Canceled after 0s

Details

All 2026-10-15; each written beside the code or text it settles.

- A-43: /usr/sbin/postlog is -rwxr-xr-x root:root in the image (postfix
  3.7.11-0+deb12u1; dpkg-statoverride lists postdrop and postqueue only):
  Debian does not install it set-gid, so it is no use to dmarc-ingest
  (cmd/panel/dmarc_ingest.go).
- C-X1: OpenSSL 3.0.22 in the image prints the same public key from
  `x509 -pubkey` and `pkey -pubout` for RSA-2048, P-256, P-384 and a SEC1
  P-256 key - cert-reload's same_pair holds for certbot's ECDSA keys.
- C-K5, D-guide:933/:233: on the live server (Docker 29.6.1, userland
  proxy on 0.0.0.0 and ::, no IPv6 on the network) an outside IPv4 client
  and the host's own public IPv4 address are logged as themselves; the
  host's IPv6 address and 127.0.0.1 arrive as 172.18.0.1. Over IPv6 every
  client is the gateway: one level-1 budget, an application IP list cannot
  name them, rspamd sees the gateway. Guide paragraph under level 1, notes
  at the milter and allow-list, comments at the anvil setup and authip.go,
  and a Security entry in the CHANGELOG (an allow-list naming the gateway
  would admit every IPv6 client).
- D-guide:61: a published port nothing listens on (a throwaway container,
  -p 20999:25) is refused from outside over IPv4 and from the host's public
  IPv4, accepted and closed through 127.0.0.1 - Docker's proxy, which IPv6
  goes through too (not probed over IPv6 for this).
- C-M8: the live installation has received one DMARC report, of one
  record: nothing to set maxReportRecords by yet - said at the constant.
- D-S7, D-arch:516, D-arch:532: a new database filled through the store to
  120 days at 1 900 messages a day (228 000 messages, 1.37 million lines,
  464 MB) on the test server (2 cores): the longest write is the line prune
  after a 30-day gap, 1.9 s for 342 000 lines (0.4 s with nothing to
  delete); the send-log delete 0.6 s; 2 000 lines of a tailer pass 18 ms;
  VACUUM INTO 1.7 s; a second connection writing every 50 ms waited 1.8 s
  at most, no SQLITE_BUSY - inside busy_timeout's 5 s. architecture.md's
  "about a second per million lines" was five times too fast; its "six to
  ten lines of 200 bytes" is 6.0 lines of 146 bytes on the live data.
- D-B16: which favicon is fetched, by the probe server's log: Edge 155
  the SVG, the desktop app's embedded Chromium 152 the PNG, with or
  without sizes="any" - layout.html's "vector wins where supported, raster
  catches the rest" holds; Firefox and Safari not measured.
- D-arch:121: the allow/deny trial again, in rspamd/rspamd:3.11.1-3 with
  today's multimap.conf: every mix of allow and deny entries matching one
  message ended reject; a changed map was used about 10 s later.
- D-sec:424: rspamd runs as _rspamd, uid 11333; the panel is uid 999.

Stand: go vet and go test ./... pass on the server (24 packages); make
e2e exit 0.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

2026-10-15 02:14:58 +03:00

mixandClaude Opus 5.5

5f86457848

milter: the level-2 limit and the client IP list hold for every message

Security fix, outside the inbound antispam feature. Found by its
technical review (Opus, 2026-10-12), reproduced on the test stand
before the fix: over an application's level-2 limit, two MAIL FROM on
one connection were answered 451 and then accepted.

Cause. Postfix introduces a client to a milter once per connection.
The milter library (go-milter 0.4.1, session.go) replaces the milter's
session after any reply that is not "continue" - a refusal, or the
accept that used to end a message. The new session never saw Connect,
so it had no client address, and both checks passed a message without
one: overLimit returned early ("no client IP to key on") and
authIPAllowed did the same. So every message after the first on a
connection, and every MAIL FROM after a refused one, skipped the
level-2 limit and an application's client IP list. In the code since
1.9.0 for the list and longer for the limit.

Fix.
  - build/postfix-config.sh: milter_mail_macros carries {client_addr},
    so the address comes with every MAIL FROM; MailFrom reads it (both
    spellings of IPv6) in the journal milter and the inbound journal
    milter.
  - overLimit no longer asks for a client address: a ceiling is on a
    domain or an application.
  - authIPAllowed refuses an application that has a client IP list when
    no address is known.
  - Body replies "continue" in both milters, which lets the message
    through as "accept" did and keeps the session.

The inbound journal milter had the same cause with a smaller effect:
rows of a connection's later messages had no client address.

In the same file, the checks of INBOUND_ANTISPAM_MILTER and
INBOUND_JOURNAL_MILTER_SOCKET refuse any character outside their set
first: a glob's "*" matched anything after the first characters.

Tests: a session that never saw Connect is judged by the macro, a
listed and an unlisted address, no address, not an address; the limit
with no client address; the inbound milter answers only "continue".
test/e2e sends two MAIL FROM on one connection over the limit and
wants both refused.

Checked on the test server: e2e red before the fix on exactly that
check, green after; go vet ./... ok, go test ./... ok (22 packages).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

2026-10-12 07:51:50 +03:00

mix

7b8685d038

release: 1.9.0: Per-application client IP allow-list and rate-limit overrides

Application sending controls: client IP allow-list for authorization, and level-2 rate limits that override the domain ceiling per application.
Added:
  - Per-application **client IP allow-list** on the domain page: when enabled,
  - SQLite migration `0009_application_auth_ips.sql` (moves legacy trusted IPs
Changed:
  - Application level-2 rate limit **overrides** the domain limit for that login
  - Domain export/import carries `auth_ip_restrict` / `auth_allowed_ips`; legacy
  - Panel help, Settings, and [guide.md](docs/guide.md) describe override semantics
  - [guide.md](docs/guide.md): full-backup section documents all four capture

Full detail: CHANGELOG.md (1.9.0).

2026-09-22 15:24:53 +03:00