Neither review (read-only agents, Opus and Fable, over ae06d8b..815236a) has
a Critical or High finding. What they found and what was done:
- A stranger on port 25 could grow the table: every queue-id line of inbound
mail was stored and pruned an hour or more later, his own message-id among
them. The tailer now leaves out the lines of a queue id that
postfix/inbound/smtpd opened, until qmgr removes the message or another
listener opens one under the id; 4096 such ids are remembered.
- A commit, so a disk sync, per stored line on the connection the journal
milter shares, and a backlog written line by line. Lines are now written in
one transaction per pass over the log, 500 at most, before the read offset
is saved (InsertSendLogLines; follow() calls the keeper's flush).
- The prune asked the send log once per line and ran hourly. It asks once per
queue id and runs at start and with the six-hourly sweep; with port-25 mail
left out there is little without a row to wait for.
- The 4096-byte cut could split a character; it keeps characters whole.
- security.md did not say that a backup now carries these lines, and the plan
said the time window excludes a reused queue id where it only limits the
chance to the row's queue lifetime. Both are corrected; the collision is
recorded as an accepted risk with its trigger.
- Tests that did not prove their comments: the prune is now tested with the
sweep, a rejected row next to the prune, batching and the change from
catching up to following, port-25 mail left out and its id reused.
Left as found and written down in the plan: lines the tailer never reads
(a file rotated away while the panel was down), and a message in the queue
across the upgrade, which shows only its later lines.
On the test server, for this tree: go vet clean, go test ./... 22 packages
ok, make e2e ok.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every mail.log line headed by a queue id is written to send_log_lines as the
tailer reads it, dated by the line's own stamp. The id is taken from the head
of the line only - the tail is the far end's text - and has to look like one:
"NOQUEUE:" and "warning:" stand in the same place.
The tailer does not check for a send-log row first: a message's first lines
come before the journal milter writes it. Lines that never get a row are
removed by the prune, which deletes lines older than an hour whose queue id
no row carries. It runs at start, after each send-log sweep and hourly.
While the tailer catches up at start a line is written only if it is not
there already, as the inbound journal does: its place is saved every few
seconds, so an unclean stop means reading some lines twice.
Checked on Windows: go vet clean; go test ./internal/logtail passes except
TestFollowTailsAndRotates, which fails there on renaming an open file and
always did. New tests: which line heads are queue ids, a line dated by its
stamp, no second copy after a rewound offset, the prune cadence and cutoff.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Step 4/12 of docs/plans/inbound-antispam-panel.md.
The log tailer writes an inbound_spam_log row for mail port 25 refused
(internal/logtail/inbound.go): a "reject:" line of the port-25 smtpd is
Postfix's own policy; a milter-reject / milter-hold / milter-discard
line of cleanup is the filter's verdict. Only a recipient at an inbound
domain is a row, so "Relay access denied" for a stranger's domain is
not. The row is dated by its log line; the reply text is cut to 255
bytes of printable ASCII; a reply starting with 4 is a tempfail.
To tell port 25 from 465 / 587 the listener now logs as
postfix/inbound (syslog_name). cleanup logs under one name for every
listener, so its verdict counts only for a queue id the port-25 smtpd
was seen to open (4096 remembered). Lines are matched from the head,
after timestamp and host: their tail is the sender's own text.
Retention: PruneInboundSpam every six hours - older than the
inbound_spam_log_retention_days setting (seeded from
INBOUND_SPAM_LOG_RETENTION_DAYS, 90, range 7-365), then down to 10 000
rows. The setting has no field in the panel yet.
Known limits, in architecture.md: a log line names one recipient, so a
message refused at end-of-message is one row; a line re-read after an
unclean stop would be a second row.
Checked on the test server, uncommitted tree: go vet ./... ok,
go test ./... ok (22 packages), make e2e ok - the unknown recipient at
the inbound domain refused on port 25 has its row (reject by postfix),
the stranger's domain has none.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
[1.0.0]
Added:
- A **Delivery log** on each delivery's page (`/deliveries/{id}`): the
- A **History** block on the same page: the journal's two timestamps stated as
Fixed:
- Postfix config: copy TLS cert/key from the (often `:ro`, host-owned) mount
- Postfix config: allow `maillog_file` under `/data` via
- E2e: read `/data/setup-token` via `docker compose exec` (file is `0600`
- Entrypoint: check `SELFPOST_HOSTNAME` before `/data` setup (so a bad identity
- E2e gate: wait for host-published `/healthz` before panel setup, and stop
… (3 more in CHANGELOG)
Changed:
- Document what `.spbk` and `.spde` stand for (SelfPost backup / SelfPost domain
- Docs aligned with the code: setup URL is `/setup/<token>` (README and
- Full backups no longer carry `/data/log`. It is Postfix's raw log plus its
- Monitoring screens (status, mail queue, system log, deliveries) use adaptive
- Documentation package consolidated into `docs/development.md`: Documentation
… (4 more in CHANGELOG)
[1.0.1]
A documentation and packaging release: no change to the mail path, the database, or the on-disk layout. Upgrading is a tag bump.
Added:
- `SECURITY.md` — how to report a vulnerability privately (GitHub private
- [docs/plans/](docs/plans/) — one document per agreed extension: the optional
Changed:
- The panel's **Account** entry is now called **Settings** — nav link, page
- The signed-in name in the panel's nav is now labelled `User:`, so it reads as
- [docs/product.md](docs/product.md) reframes the future line: the inbound
- [docs/security.md](docs/security.md) is now in English, matching the rest of
- The README documentation table now points at `SECURITY.md` for reporting a
… (2 more in CHANGELOG)
Fixed:
- The panel's static assets are served with a content ETag and
Squashed CHANGELOG sections: [1.0.0], [1.0.1].
Full detail: CHANGELOG.md (1.0.0, 1.0.1).
A bounce could be recorded as a successful delivery. The log-tailer's
Fixed:
- A bounce could be recorded as a successful delivery. The log-tailer's
- Log-tailer resumes where it stopped instead of jumping to end-of-file on
- Level-2 rate limit no longer overshoots under concurrency: messages that
Changed:
- The project has a single public home: `github.com/mixeme/selfpost`. Codeberg
- Code comments no longer cite the archived specification. References like
- `docs/code-review.md` is gone. Its plan is finished — phases 0 (bar the
- `docs/architecture.md` gained a *Code layers* section: a diagram of
- Phase 1 doc/code hygiene (`docs/code-review.md`): removed ~30 stale
… (1 more in CHANGELOG)
Security:
- Pre-release security review (plan § D, model Fable, 2026-08-06): full pass
- `saslpasswd2` argv: the application login is now passed after a `--`
Added:
- Optional password encryption for the two secret-bearing downloads (plan
- Domain import accepts an encrypted export: the envelope is detected by its
- `selfpost-backup` writes encrypted archives and reads them back:
- `TestParseDelivery` covers the exotic mail.log shapes the review asked for
- docs: README *Encrypting a backup or export*; `docs/security.md` §
… (14 more in CHANGELOG)
Removed:
- docs: `security.md` — accepted risk «restore old backup revives session rows»
Changed:
- docs: `implementation-plan.md` trimmed to the sole open v1.x gate — pre-release
- docs: `architecture.md` — sessions (SQLite, idle renew, password change),
- docs: `development.md` — expanded e2e stack and `release.yml` matrix workflow.
- docs: `security.md` — accepted risk for send-log rows stuck at `queued` after
- docs: `roadmap.md` — optional send-log / `mail.log` follow-ups under v1.x tail.
… (10 more in CHANGELOG)
Full detail: CHANGELOG.md (0.5.0).
Initial feature-complete implementation of the v1.0 specification (phases 0-11 of `docs/implementation-plan.md`).
Added:
- Panel (Go, single static binary) with SQLite persistence, one-time
- Domain management with per-domain DKIM (RSA-2048, generated in pure Go) and
- Application (sender identity) management: SASL credentials via `sasldb2`,
- Full Postfix relay config generated from env at container start: SMTPS 465,
- Journal milter (pure Go, `go-milter`) recording every send to `send_log`;
… (6 more in CHANGELOG)
Full detail: CHANGELOG.md (0.1.0).
mixandClaude Opus 5.5