7192c3861e1a30d34f19a492d37d798be92bd886
5
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  mixandClaude Opus 5.5
|
7192c3861e |
inbound-antispam-panel: Filter lists, kind column, matches, note on a sheet
Follows the design commit before it (owner's words quoted there). The lists' tables are Value, Kind, Matched and Remove. The kind tag opens the entry's sheet: note, day added, how often it decided a message in the days the log keeps, and the last match. Matches are read off the journal on each view, nothing is stored (inbound.Lists.Usage, store.ListSpamListHits). A row counts for an entry when the list decided the message - a rejected row whose reply is the deny rule's message, an accepted row whose verdict carries the allow rule's symbol for that kind - and the entry fits the row's sender or client address the way rspamd matches it: an address whole, a domain as the sender's domain, a network containing the client (an IPv4-mapped address as IPv4). A failure to count shows the lists with "never" and logs why. For that the journal milter keeps the lists' own symbols ahead of its six-symbol cap: rspamd writes symbols heaviest first, so an allow entry's -100 came last and was cut behind any six others. The plan gains "Filter list usage": what counting from the journal implies, and - the owner asked for it in writing - the conditions under which a counter kept with each entry becomes worth a migration (the journal cut by its row cap and not by age; a short retention; counts that must outlive the journal; a slow page). multimap.conf says which of its texts SelfPost reads back. Tests: Usage over every kind on both lists and the rows that are nobody's; the milter's symbol order; the store query; the page and its sheets; a handler test from journal rows to the numbers on the page. Seen: the fixture page with a sheet open, headless Edge at 1360 px - the same as the accepted drawing. Checked on the test server, uncommitted tree: go vet ./... ok, go test ./... ok (22 packages), make e2e ok. Not seen in a real run: a count above zero. It needs an entry added in the panel, which I cannot sign in to, and then mail that the list decides; in particular the deny rule's message arriving in mail.log as the reply of a milter-reject line is what the trial with rspamc showed, not yet what Postfix logged. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
56c5dfee40 |
inbound-antispam-panel: Inbound > Log and Inbound > Filter lists
Step 6/12 of docs/plans/inbound-antispam-panel.md. Written by a Sonnet
subagent from the mockups, reviewed and corrected by me.
GET /inbound/log - the journal a page at a time (50), filtered by
domain, decision and day; QueryInboundSpam / CountInboundSpam with the
viewer's inbound domains as the scope. The global role reads all of it
and gets "Deny sender" / "Allow sender" links into the lists; a user
with the domain role reads the rows of the inbound domains assigned to
them, without the links. The plan said global-only for the journal;
the accepted mockup and 2.0's delegation of Inbound say otherwise -
recorded in the plan as built.
GET, POST /inbound/filter-lists and POST .../{id}/delete - global role,
404 otherwise. Add form (prefilled from the query), the two lists with
Remove as the kit's row action, and "Where the lists go" with the
filter's state and when the maps were last written
(Lists.LastWritten). A refused or duplicate entry is 422 with the
message and what was typed.
Server > Settings: "Keep inbound log rows, days" with the relay on.
Help: Inbound log, Filter lists. Navigation: Log for everyone who sees
Inbound, Filter lists for the global role (Shell.ShowFilterLists).
Status tags accept / reject / tempfail join the kit's mapping.
Tests: page fixtures for both screens, held to outlines.json; view and
handler tests (both roles, filters, paging, relay off, add / duplicate
/ invalid / delete, map file content, settings field, help). e2e reads
the journal from the page instead of the database and adds and removes
a deny entry through the panel, reading deny_domain.map after each.
Seen: both pages and Settings rendered from their fixtures and compared
with the mockups side by side (headless Edge, 1360 px) - same layout
and wording.
Checked on the test server, uncommitted tree: go vet ./... ok,
go test ./... ok (22 packages), make e2e ok.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
eea40bcd49 |
inbound-antispam-panel: filter lists, written as rspamd maps
Step 5/12 of docs/plans/inbound-antispam-panel.md.
Store: AddSpamListEntry, ListSpamListEntries, DeleteSpamListEntry.
internal/inbound/lists.go validates and normalises an entry - sender
address, sender domain, client address or network (canonical text, an
IPv4-mapped address as IPv4, /0 refused) - and writes the lists as six
map files under /data/antispam (ANTISPAM_DIR), each atomically, 0644 in
a 0755 directory: the filter is another user in another container. All
six are written on every change and on every start with the relay on,
empty ones included. An entry whose maps could not be written is taken
back out of the table. The writer refuses a stored value with
whitespace, a newline or # in it.
The plan's allow.map / deny.map became one file per list and entry
type: to rspamd an IP map and a sender map are different map types.
deploy/antispam/rspamd/multimap.conf holds the rules; the fragment
mounts it and ./data/antispam into the sidecar. Deny is a prefilter
reject, allow a symbol weighing -100. Tried in a throwaway rspamd 3.11
container on the test server:
- with allow as a prefilter accept, an address on both lists was
accepted and an IP on both was refused - the rule that ran first
decided; with the weight, deny won in all five mixed cases;
- IPv4, IPv6, address (any case), domain (not its subdomains) match;
- a rewritten file is reread in about ten seconds, no restart;
- files that appear after rspamd started are loaded the same way.
No page edits the lists yet (step 6).
Checked on the test server, uncommitted tree: go vet ./... ok,
go test ./... ok (22 packages), make e2e ok - with the relay on
/data/antispam is 755 and holds the six maps, 644, empty.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
b2fbe91de9 |
panel-redesign: security review of 2.0 - sessions belong to a user by id
Stage 3, step 2. Reviewed by Fable (read-only), fixed by Sonnet with a
failing test before each fix, checked by Opus. No Critical or High
finding: route authorization, tenant isolation by id, the /server/
subtree guard, output encoding and the origin check were found sound.
Fixed
- M1: a session was keyed by user name and had no link to the user. A
deleted or renamed user's cookie stayed alive (renewed on every hit,
before the user was looked up) and became a session of whoever was
later created under that name, with that account's role. The
baseline now has sessions.user_id REFERENCES users(id) ON DELETE
CASCADE; the principal is resolved by id and a session is renewed
only after its user was found. RenameSession is gone.
- M2: any user's password change deleted every other user's sessions.
It ends that user's other sessions only.
- L1: a password set on the user form ends that user's sessions (an
administrator editing their own account keeps the current one).
- L2: store, saslpasswd2 and Postfix reload errors were shown verbatim
on the application form, the inbound upstream / recipients forms and
the limit recalculation - pages a domain administrator reaches.
Validation errors (app.ValidationError, inbound.ValidationError,
store.ErrNotAutoRateLimit) keep their text; anything else is logged
and shown as "Could not save ... Check the logs and try again."
- L3: store.ListDMARCReports treated an empty domain list as "all". It
takes a scope now (AllDomains or a list; an empty list is no rows),
and the DMARC hub is open to the domain role as the plan says: the
reports of the assigned domains, without the instance-wide ingest
box. The menu entry was already shown to them and led to a 404.
- I1: /static/ answered with a listing of the embedded assets. A path
that is not a known asset is a 404.
Consequences
- The global DMARC hub lists reports of domains that were deleted
since, too.
- dev/migrate1x (not in the tree) no longer carries sessions over:
everyone signs in again after the transfer.
- docs/schema-migrations.md: the sessions row.
Recorded, not changed - for the owner:
- L4: the report-address select names the followed user and their
address to every administrator of the domain, by default the global
administrator's login name. The plan asks for it.
- L5: a delegated inbound upstream may be any host and port, loopback
and private ranges included - within the trusted-operator model; to
be listed among the accepted risks in security.md.
- L6: Account's profile is saved without the password; becomes a
requirement once password-reset mails to users.email.
- Still echoing an error's text: backup and domain import (global
only), the domain form's validation messages.
Not checked by the review: anything needing the container (e2e, real
Postfix / DNS), CSP behaviour in a live browser.
go test -count=1 ./internal/web/... ./internal/store/... ./internal/app/...
./internal/inbound/... ./internal/dmarc/... ./cmd/panel
ok (all eleven packages; dev/migrate1x also ok)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mix
|
656c4d4d7f |
release: 1.4.0: Optional inbound relay (backup-MX) on port 25
Optional inbound relay (backup-MX / forwarder) on port 25, off by default. Mail is accepted only for domains configured in the panel and forwarded to an upstream; there are still no mailboxes. A dedicated security review of the inbound path is still open on the plan (Fable). Added: - `INBOUND_RELAY_ENABLE` (default `false`): when true, Postfix listens on - Panel **Inbound** pages (global administrator): domains, upstream host/port - Optional `INBOUND_ANTISPAM_MILTER` on the inbound listener only, plus - Inbound rate limit (`INBOUND_RATE_LIMIT_MESSAGES_PER_IP`, default 20) and Changed: - Compose publishes host port 25 even when the flag is off (nothing listens - Full-backup restore Resync also rebuilds inbound maps when the flag is on. Full detail: CHANGELOG.md (1.4.0). |