7fdf09839ff99bcbf7d37b08868ffefa6d8027e4
13
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  mixandClaude Opus 5.5
|
a990e7cc23 |
delivery-log-storage: findings of the technical and security reviews
test / test (push) Canceled after 0s
Neither review (read-only agents, Opus and Fable, over ae06d8b..815236a) has a Critical or High finding. What they found and what was done: - A stranger on port 25 could grow the table: every queue-id line of inbound mail was stored and pruned an hour or more later, his own message-id among them. The tailer now leaves out the lines of a queue id that postfix/inbound/smtpd opened, until qmgr removes the message or another listener opens one under the id; 4096 such ids are remembered. - A commit, so a disk sync, per stored line on the connection the journal milter shares, and a backlog written line by line. Lines are now written in one transaction per pass over the log, 500 at most, before the read offset is saved (InsertSendLogLines; follow() calls the keeper's flush). - The prune asked the send log once per line and ran hourly. It asks once per queue id and runs at start and with the six-hourly sweep; with port-25 mail left out there is little without a row to wait for. - The 4096-byte cut could split a character; it keeps characters whole. - security.md did not say that a backup now carries these lines, and the plan said the time window excludes a reused queue id where it only limits the chance to the row's queue lifetime. Both are corrected; the collision is recorded as an accepted risk with its trigger. - Tests that did not prove their comments: the prune is now tested with the sweep, a rejected row next to the prune, batching and the change from catching up to following, port-25 mail left out and its id reused. Left as found and written down in the plan: lines the tailer never reads (a file rotated away while the panel was down), and a message in the queue across the upgrade, which shows only its later lines. On the test server, for this tree: go vet clean, go test ./... 22 packages ok, make e2e ok. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
1e6836b3c1 |
delivery-log-storage: a message's page reads its stored lines
The Delivery log box on a message's page was filled by searching the current
mail.log on every view; that file is rotated daily, so the box was empty for
anything not sent today. deliveryLog now asks the store for the row's lines -
its queue id, dated within the row's queue lifetime plus a day
(RetryPolicy.LongestLifetime) - and shows the latest 200, oldest first.
When nothing is stored the page still searches the current file, which is
what shows a message accepted before 2.2.0. When that finds nothing either,
the note no longer blames rotation for the ordinary case: it says lines are
kept with the row since 2.2.0. The Outbound log help topic in help.go follows
the mockup changed in
|
||
|
mixandClaude Opus 5.5
|
32c6ae98a1 |
panel-redesign: the queue in the new shell; the old design is removed
Stage 2, steps 7 and 8 in one commit: the static guard fails as soon as
the ratchet holds no page while legacy.css still exists, and the tests
of the old layout need it while that layout exists - the two steps do
not split into states that pass on their own. Written by Sonnet,
reviewed by Opus.
The queue
- out-queue, named after its mockup: today's content - the listing of
postqueue -p in a log pane, polled as before (GET
/outbound/queue/fragment) - and the "How retries work" facts. The
mockup's table of messages is the roadmap's queue-as-a-table; the
outline guard exempts this page for exactly that reason. Routes and
the global-only check are unchanged; the page has no actions and
never had.
- Inbound has no Queue entry and no route serves one.
The old design is gone
- Deleted: layout_legacy.html, legacy.css, logo-compact.svg,
mail_queue.html, mail_queue_body.html.
- view.go has one path: every page is layout.html + components.html +
its own files; kitPages, kitFragments, the map-data branch of Render,
the dict and back template functions and metaOf's map branch are
removed. handlers: pageBase removed.
- legacy_pages.txt holds its header and no entry.
- panel.js: the old copy handler (button.copy in .code-row) is
removed. A show-when rule now applies to every element it matches,
and hiding adds Bulma's is-hidden beside the hidden attribute - a
.box or a grid row has a display of its own and stayed visible.
- The user form hides both domain lists again when the role is Global
(Box.DomainPick, an attribute; data-global-role on the select).
- Tests of the old layout are deleted; what they asserted about the
shell (version only signed in, the menu follows the user's reach,
Inbound only with the feature, Help present, the current entry
marked) is asserted on the kit pages, two tests added for it.
For the owner: is-hidden is a Bulma class outside the subset of
check.py. No template writes it - the script sets it at run time to
hide a block - so no guard sees it; say if it should be on the list.
Evidence
- docs/assets/panel-redesign/evidence/out-queue.png: 1440 px wide,
headless Edge, the real template served locally with its fixture -
NOT from the container (no Docker on this machine).
- panel/audit.js on out-queue, user and backup at 1440 and 1280:
366 texts checked, problems: [].
- In a browser against the local fixture server: the encryption
fields of Backup, the manual / auto limit fields and the custom
report address of Domain settings show and hide with their control;
all 28 fixture pages answer 200 with panel.css, /static/legacy.css
answers 404.
- Not exercised: polling against a real postqueue (none on Windows).
- go test -count=1 ./internal/web/... ./cmd/panel
ok internal/web
ok internal/web/auth
ok internal/web/handlers
ok internal/web/validate
ok internal/web/view
ok cmd/panel
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
2f1ec65b30 |
panel-redesign: Outbound log, message and the DMARC report pages on the kit
Stage 2, step 4. Written by Sonnet, reviewed by Opus.
- Five pages named after their mockups: out-log, out-message, dmarc,
dmarc-domain, dmarc-report, with typed page data
(view/outbound_log.go, dmarc.go), fixtures and tests. The engine
pages deliveries and delivery are gone with their templates; the
three DMARC templates are written anew. All five old names are off
legacy_pages.txt.
- The log polls its table (GET /outbound/log/fragment, as before); the
page count in the box foot follows out of band, and the filter in
the head is no longer swapped away while it is being chosen.
- Handlers pass typed data; routes, query parameters, filters, paging
and authorization are unchanged.
- Kit: Foot.ID / Foot.OOB (attributes only, as on Head) and Fact.Small,
the mockup's "sp-mono sp-small" value, for a report id and an rua
that wrapped mid-word in their column.
- test/e2e status scrapers match the new tag markup. Not run: no
Docker here.
Fixed on the way
- The DMARC domain page read a field its source rows do not have and
answered 500 as soon as the domain had a source. It builds the rows
from the store's rollup now, with a test.
Differences from the mockups, for the owner:
- the log has no Status filter (the store filters by domain and
application only); a refused message is "rejected", a neutral tag as
the mockup's "rate-limited" is;
- the message history keeps the panel's own wording with full dates and
has no "accepted from <IP>" step - the client address is not stored;
- dmarc: before the first report the box says "None yet" with what to
check; a quiet mailbox is an amber "quiet" tag;
- dmarc-domain: the stamp is pass / (pass + fail) rounded down, amber
on any failure, red when nothing passed, absent without mail;
- dmarc-report: the title has no year; "this relay" marks record rows
as well as sources.
Known and left as it is (not introduced here): the DMARC hub answers 404
to a domain administrator while the menu shows the entry and the plan
gives that role the reports of its own domains. Opening it needs the
report list to refuse an empty domain filter first - for the stage-3
security review.
Evidence
- docs/assets/panel-redesign/evidence/out-log.png, out-message.png,
dmarc.png, dmarc-domain.png, dmarc-report.png: 1440 px wide, headless
Edge, real templates served locally with their fixtures - NOT from
the container (no Docker on this machine).
- panel/audit.js on the five pages at 1440 and 1280: 784 texts checked,
problems: [].
- Polling of the log was exercised in a browser against a local
fixture server with document.hidden overridden: four polls, one
table and one foot after each, the filter untouched.
- go test -count=1 ./internal/web/... ./cmd/panel
ok internal/web
ok internal/web/auth
ok internal/web/handlers
ok internal/web/validate
ok internal/web/view
ok cmd/panel
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
b6feac2200 |
panel-redesign: the application form is one POST, under its domain
Stage 1, step 4 (plan § Routes).
Service (internal/app)
- Settings{Mode, Addresses, AuthIPRestrict, AuthAllowedIPs, Limit} is what
the form holds besides the login. CreateWithSettings creates the
application with all of it and removes it again if a later write fails;
SaveSettings validates the sender rule first and, if a later write
fails, puts back what it had already changed. The form produces a whole
application or leaves things as they were.
- Limit.Mode "" is "use the domain limit"; auto takes its ceiling from a
recalculation the caller supplies.
Routes and handlers
- GET, POST /outbound/domains/{id}/applications/new
GET, POST /outbound/domains/{id}/applications/{aid}
POST .../{aid}/password, .../{aid}/ratelimit/recalc, .../{aid}/delete
replace POST /domains/{id}/applications and the six /applications/{aid}/*
routes. lookupDomainApplication answers 404 when the application is not
in the domain named by the path - also when the caller may open that
domain.
- A generated password is the response to its POST only (no GET path) and
is sent with Cache-Control: no-store.
- The login is not renamed by the form; a changed login is a 400.
Old domain page: the three per-application forms (mode, IP restriction,
limit) are one form with one Save; "Remove limit" became the "Use the domain
limit" choice. The e2e client follows (edited, not run here).
Tests: service - create and save in every limit mode, and all-or-nothing on
a refused sender rule, a failed recalculation and a failed sender-map
rebuild; handlers - the form's parsing, one POST creating sender + IPs +
limit, four kinds of refused form creating nothing, save, the no-store
header on both password pages, and five application routes against another
tenant's application addressed through its own domain and through the
caller's.
With @routes removed by hand TestRoutesFollowNavigation now reports only
GET /server/health (step 5).
go test ./... green except the two Windows-only failures in internal/domain
and internal/logtail.
Roadmap 14/27.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
bd746c61d7 |
panel-redesign: paths follow the menu; Account and Server settings split
Stage 1, step 3 (plan § Routes). BREAKING: every panel URL changes and the
old paths are removed without redirects.
Routes (web.go)
- /status -> /overview; /domains -> /outbound/domains with the domain's
settings actions under .../settings/ (reports, ratelimit, export);
/deliveries -> /outbound/log; /mail-queue -> /outbound/queue; /dmarc ->
/outbound/dmarc; /inbound -> /inbound/domains; /system-log ->
/server/log; /backup -> /server/backup (import under it); /users ->
/server/users; recheck and reload under /server/health/.
- One fragment name: <page>/fragment everywhere.
- Everything under /server/ is registered through server(), which wraps
the handler in globalOnly: the subtree is guarded once, where a new
route cannot forget it. Handlers keep their own requireGlobal.
- GET / leads to /overview, /outbound/domains or /inbound/domains.
- The /account -> /settings redirect is gone with /settings.
Account and Server > Settings
- handlers_account.go: GET /account and three POSTs - profile (username,
e-mail; no password asked, as designed), password (current password,
rate-limited like a sign-in, signs out other sessions), dmarc (the
user's default: hosted / account / custom / none, each validated).
This replaces step 1's bridge through the old Settings form.
- handlers_settings.go is the instance's page only: log retention and the
read-only rate limits, global role.
- One legacy template serves both pages by a flag until stage 2 gives each
its own: a new legacy page cannot be added to the ratchet.
Still to come inside stage 1, and why @routes stays on the ratchet:
- step 4: the application routes (one POST, under the domain);
- step 5: GET /server/health.
With @routes removed by hand TestRoutesFollowNavigation reports exactly
those and nothing else - no template links to a path the router lacks.
Old templates, tests and the e2e client are retargeted. The e2e module was
edited but not run here (no Docker, and its dependency could not be
downloaded on this machine).
Tests: Account (page, profile, password, DMARC default in every mode, a
domain administrator's own row only), Server settings (saved without a
password, range, global only), the /server/ subtree answered 404 by the
router for a domain administrator with All on both lists and for no
principal.
go test ./... green except the two Windows-only failures in internal/domain
and internal/logtail.
Roadmap 13/27.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
3b86f6c3b6 |
panel-redesign: inbound is delegated per user, separately from outbound
Stage 1, step 2 (plan § Who sees what).
Store
- Reach{AllDomains, DomainIDs, AllInbound, InboundDomainIDs} is what a
domain user is assigned. CreateUser takes it; SetUserReach / ClearUserReach
replace SetUserDomains / ClearUserDomains and write both directions in one
transaction. A domain user with nothing on either list is refused
(ErrEmptyReach). With All set the rows of that direction are not stored,
so clearing All later brings nothing stale back.
- ListDomainsForUser honours all_domains; ListInboundDomainsForUser is its
inbound twin. Both filter in the query.
Authorization
- auth.Principal carries the whole reach: CanAccessDomain (now also true
with All), CanAccessInboundDomain, HasOutbound, HasInbound. An id or a
name on one list opens nothing on the other.
- Inbound handlers in three strengths: requireInbound (the list, filtered),
requireInboundDomain (one domain: page, DNS re-check, upstream,
recipients), requireInboundGlobal (add, delete confirm, delete). All
answer the same 404.
- domainIDSet and the DMARC report pages go through the principal instead
of looking at p.Domains themselves.
Panel (old templates, until stage 2)
- User form: two lists with All; inbound is offered only where the feature
is on, and saving the form with it off keeps the user's inbound reach.
Promotion to global drops the reach.
- Menu: a group with nothing assigned is absent; / sends an inbound-only
administrator to Inbound. The inbound pages hide add / delete from a
domain administrator.
Tests: every route of one inbound domain against five kinds of refused
request (another tenant's id, a missing id, outbound-only reach, an outbound
domain with the same id, one with the same name, no principal) with the 404
bodies compared; add/delete as every non-global user; the filtered list
including a domain added later; thirteen outbound routes against another
tenant's domain and application id; the user form; the reach in the store;
the principal matrix; the menu; the home redirect. Removing the access check
or the query filter makes the tests fail (checked by hand).
go test ./... green except the two Windows-only failures in internal/domain
and internal/logtail that predate this work.
Roadmap 12/27.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
8d1af89e1a |
panel-redesign: the 2.0 schema from zero - one baseline, no 1.x chain
Stage 1, step 1. BREAKING: a 1.x database is not migrated.
Schema
- internal/store/migrations/ holds one file, 0001_init.sql, equal to the
2.0 schema; 0002..0010 are deleted (they stay in history at 1.9.5). No
admin table created and dropped, no ALTERs.
- users.email replaces users.dmarc_report_email: the address is the
user's own. The default DMARC report address is a user's setting
(dmarc_default_mode hosted/account/custom/none, dmarc_default_address);
the instance setting that mirrored the global user's field is gone.
- domains.dmarc_rua_user_id: a domain follows a named user's default, or
has an address of its own in dmarc_rua ('' = none). ON DELETE SET NULL
leaves it at "no reports", never at someone else's default.
- user_inbound_domains, users.all_domains, users.all_inbound_domains: in
the schema for the inbound delegation of the next step.
- users.role is 'global' / 'domain' (was 'domain_admin');
rate_limits.allowed_ips, unused since 1.9.0, is dropped.
Opening a database
- The baseline sets PRAGMA application_id ("SP20"). store.Open refuses a
file that has a schema version without it (ErrForeignSchema) and one
newer than the build. A 1.x file at user_version 10 would otherwise read
as already migrated. The refused file is left untouched.
Code
- Store.DomainDMARCRua is the one place a domain's report address is
resolved; dnscheck.ResolveDMARCRua and Store.GlobalDMARCReportEmail are
gone. dmarc.AllowedRecipients, the domain page, the dashboard and the
DNS re-check go through it.
- The old templates keep working on the new model until their pages are
restyled: the Settings form's address field is the account e-mail and
switches the user's default between it and none; a domain's "Same as
Settings" makes it follow the user who chose it; a new or imported
domain follows its creator.
- Domain export/import: a domain that follows a user exports no address.
Tests: the baseline pinned table by table (TestBaselineSchema), refusal of a
1.x and of a newer database, constraints and cascades of the new columns and
table, resolution in every default mode, the deleted-user case, and the three
bridged handlers.
docs/schema-migrations.md is rewritten for the baseline; roadmap 11/27,
schema-squash marked built.
go test ./... (Windows)
ok for every package except two that fail the same way before this commit:
internal/domain TestWriteLoadPrivateKeyRoundtrip (file mode on NTFS)
internal/logtail TestFollowTailsAndRotates (rename of an open file)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mix
|
dca7d99c1b |
release: 1.5.0: Send-log retention configurable in panel Settings
Send-log retention is configurable from panel **Settings** (global administrator); `SEND_LOG_RETENTION_DAYS` seeds the initial default only. Added: - Panel **Settings** (global administrator): **Send log retention (days)** — Changed: - Deliveries list and delivery detail pages show the configured retention Full detail: CHANGELOG.md (1.5.0). |
||
|
mix
|
656c4d4d7f |
release: 1.4.0: Optional inbound relay (backup-MX) on port 25
Optional inbound relay (backup-MX / forwarder) on port 25, off by default. Mail is accepted only for domains configured in the panel and forwarded to an upstream; there are still no mailboxes. A dedicated security review of the inbound path is still open on the plan (Fable). Added: - `INBOUND_RELAY_ENABLE` (default `false`): when true, Postfix listens on - Panel **Inbound** pages (global administrator): domains, upstream host/port - Optional `INBOUND_ANTISPAM_MILTER` on the inbound listener only, plus - Inbound rate limit (`INBOUND_RATE_LIMIT_MESSAGES_PER_IP`, default 20) and Changed: - Compose publishes host port 25 even when the flag is off (nothing listens - Full-backup restore Resync also rebuilds inbound maps when the flag is on. Full detail: CHANGELOG.md (1.4.0). |
||
|
mix
|
0730b2090e |
release: 1.3.0: 1.3.0-1.3.1: security pass, queue persist, full backup layout
[1.3.0] Security and quality after 1.2.5: domain-admin send-log authorization, fail-closed sign-in and application delete, level-2 rate-limit race fix, restore Resync, expanded tests, operator docs, release CI, and OFL for IBM Plex. Upgrading from 1.2.x is a tag bump; no migration. Added: - licence: the SIL Open Font License 1.1 text now travels with the IBM Plex - docs: agreed roadmap item **queue-retries** — show this Postfix's retry Security: - The independent security review of the send-log authorization and Fixed: - test (e2e): send-log status scrapers follow the badge markup in - security (panel): the Deliveries list is scoped to a domain administrator's - mail (level-2 rate limit): the ceiling is no longer overshot by messages that - panel (sign-in): a session that cannot be written to the database no longer - panel (applications): deleting an application removes its SASL credentials … (2 more in CHANGELOG) Changed: - docs: operator and as-built docs aligned with the code after a full - docs: [guide.md](docs/guide.md) reorganised into **Installation**, **Instance - docs: the 2026-08-13 full-tree review plan is complete — every phase (P0–P7) - licence: [NOTICE](NOTICE) tells modifiers to update `SourceURL` in - ci: the release image is published only for a **published** GitHub Release … (9 more in CHANGELOG) [1.3.1] Retry policy in the panel, persistent Postfix queue, and self-contained full backups. Mail queue and delivery history show this Postfix's first retry, backoff cap, and queue lifetime. Deferred mail survives container recreate. Full backups now archive `data/`, compose, `.env`, and `certs/`; the archive layout breaks 1.3.0 flat backups (unpack those with `tar xzf backup.tar.gz -C ./data` as before). Upgrading from 1.3.0 is a tag bump; no schema migration. Added: - Mail queue and a delivery's history show this Postfix's retry policy - docs: **Plan checklists** in [development.md](docs/development.md) — format, - docs: **Implementation checklists** with model routing in - docs: roadmap candidates **send-log-retention** (panel Settings for delivery - Postfix queue under `/data/postfix/queue` — deferred and active mail survive … (1 more in CHANGELOG) Changed: - **Breaking:** full-backup archive layout — paths are prefixed with `data/`; - docs: operator guide, architecture, security, and backup UI updated for - docs: HTML mockups for a full panel UI refresh Changed: - docs: panel UI mockups after review — Status restored to live readings - docs: panel UI design system and mockups rebuilt as separate pages - docs: panel UI mockups — add-domain sits in the list card (Domains and Fixed: - ci (GHCR): per-arch package tags (`X.Y.Z-amd64`, `X.Y.Z-arm64`) are dropped Squashed CHANGELOG sections: [1.3.0], [1.3.1]. Full detail: CHANGELOG.md (1.3.0, 1.3.1). |
||
|
mix
|
60e08e802e |
release: 1.2.0: Panel 1.2.0-1.2.5: layout, RBAC, tests, GUI and CI fixes
[1.2.0] The second MINOR after 1.0.0: domain administrators with per-domain scope, a panel visual refresh on the SelfPost palette, and refinements to navigation and the send log. Upgrading runs one SQLite migration (`0005_panel_users`); the single administrator becomes a global user. Added: - panel: **domain-admin role** — global administrators manage panel users and Fixed: - Docker build: `LICENSE` is no longer excluded by `.dockerignore`, so the - panel: on signed-in pages with a narrow card (**Settings**, the user form) Changed: - panel: navigation session icons are distinct — **Settings** uses a gear, - panel: `/` redirects domain administrators to `/domains`; global users still - panel: **Sign out** in the navigation column uses the same type size and - panel: **visual style** brought in line with the SelfPost mark — brick accent - panel: the send log's **status is a badge**, in the same ok/warn/error/unknown … (1 more in CHANGELOG) [1.2.1] Panel refinements after 1.2.0: navigation icons, status-badge centreing, drill-down back-link placement, and safeguards for the sole global administrator. Upgrading is a tag bump; no migration. Fixed: - panel: status badge text sat low in the box (and below the heading or label - panel: the **Users** navigation icon was two full silhouettes with staggered - panel: the **Settings** navigation icon was a sun-with-rays (circle plus - panel: the user create/edit form placed «Back to users» at the bottom of the Changed: - panel: the user edit form disables role change and delete for the only global - panel: the user create/edit form hides **Assigned domains** when the role is - panel: **Settings** shows panel credentials and DMARC aggregate reports side [1.2.2] Status page layout after 1.2.1: paired cards in a wide column, denser machine and check copy, and a user-form checkbox fix. Upgrading is a tag bump; no migration. Changed: - panel: **Status** is wide again so paired cards fill the column. Layout: Fixed: - panel: cards inside `.split` used `margin: 0 auto`, which in a CSS grid - panel: on the user create/edit form, **Assigned domains** checkboxes stacked [1.2.3] Domain detail layout and panel polish after 1.2.2. Upgrading is a tag bump; no migration. Changed: - panel: the domain detail page is wide with paired cards (DKIM+SPF ‖ DMARC; - panel: Domains list — **Add domain** sits beside the domain field; the - panel: page URLs, browser titles, and headings are aligned — **Settings** is Fixed: - image: `mail.log` rotation no longer silently stops when the build context [1.2.4] Level-2 rate-limit semantics inverted after 1.2.3, plus a small DNS field height fix. Upgrading is a tag bump; no migration. Changed: - rate limiting (level 2): domain ceilings apply to every client IP (no IP Fixed: - panel: on the domain DNS status grid, the Type (TXT) field height matches [1.2.5] Rate-limit form polish after 1.2.4. Upgrading is a tag bump; no migration. Changed: - panel: rate-limit forms refined — level-1 backstop as muted copy on the Squashed CHANGELOG sections: [1.2.0], [1.2.1], [1.2.2], [1.2.3], [1.2.4], [1.2.5]. Full detail: CHANGELOG.md (1.2.0, 1.2.1, 1.2.2, 1.2.3, 1.2.4, 1.2.5). |
||
|
mix
|
f62fe23826 |
release: 1.1.0: Domain-admin role and internal/web package split
The first MINOR after 1.0.0: send-only DMARC guidance in the panel, AGPL packaging on every page, and an internal split of `internal/web` ahead of domain-admin work. Upgrading runs one SQLite migration (empty defaults; existing DNS guidance is unchanged until you set a report address). Changed: - `internal/web` split into subpackages (`web/view`, `web/auth`, `web/validate`, Added: - panel: DMARC guidance for send-only relays — the suggested `_dmarc` record - AGPL packaging hygiene: [NOTICE](NOTICE) names the copyright holder and the - [docs/roadmap.md](docs/roadmap.md) — candidate item **visual-style** (panel Full detail: CHANGELOG.md (1.1.0). |