815236a6076b4f0daaac94cefe87a1f453b2fc22
7
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  mixandClaude Opus 5.5
|
d398f488e2 |
inbound-antispam-panel: the filter signs what it judged
test / test (push) Canceled after 0s
Closes what the security review left as an accepted risk: with the
spam filter down - it is attached fail-open - nothing removes verdict
headers a sender wrote himself, and the inbound journal recorded his
verdict as the filter's. The owner asked whether rspamd could add a
header that proves the others are ours (2026-10-12) and agreed to a
signature: a fixed mark could be written by a sender as easily as the
verdict.
- inbound.FilterKey: a key of 32 random bytes, 64 hex characters, in
/data/antispam/filter.key, made on the first start with the relay
on. 0644 like the list files beside it: the filter is another user
in another container.
- deploy/antispam/rspamd/milter_headers.conf: a custom routine reads
the key through the directory the sidecar already mounts and adds
X-SelfPost-Filter, the HMAC-SHA256 of the message's queue id, hex;
a header of that name from the sender is removed.
- internal/milter/inbound.go: the verdict headers are kept as they
are read, and at end-of-message - when the queue id is known - they
count only if the signature fits (FilterSignature, hmac.Equal). No
key, no queue id, no signature or a wrong one: the row is that of
mail nobody judged (accept, selfpost, no detail).
The signature goes on to the upstream with the mail and is of no use
there: it fits one queue id.
Tried in a throwaway rspamd 3.11 container on the test server before
the Go side was written: the routine loads, signs
(2aa1ca6d... for key 0123...cdef and queue id 4A1B2C3D5E, the value
python's hmac gives and TestFilterSignatureIsWhatTheFilterWrites
pins), removes a sender's header of the same name, and adds nothing
without a queue id.
Tests: signed, unsigned, made-up, another message's, another key's,
the sender's followed by the real one, the next message on the
connection, no queue id; the key made once, read after, replaced when
damaged, left alone by the lists. e2e: filter.key is there, 644, 65
bytes.
docs/security.md: the accepted risk is replaced by a narrower one (the
key is readable on the host); Mail path describes the signature.
Checked on the test server, uncommitted tree: go vet ./... ok,
go test ./... ok (22 packages), make e2e ok.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
9d330bed77 |
inbound-antispam-panel: Inbound log, Why as a sheet; no Deny on a Postfix reject
Follows the two design commits before it (owner's decisions quoted there). Kit: a new component, Sheet / SheetRow (components.go), partials sheet_tag and sheet (components.html), its rules in panel.css as in theme.css, and its sample on the kit page next to status_tag. It is the browser's popover: no script. Inbound log: the Why column is gone; the decision tag opens a sheet with who decided, then either the filter's verdict and its symbols one a line (a detail the journal milter wrote) or the reply (a detail the tailer read from mail.log - it starts with its code), and the subject whole. The sheet's id is the journal row's. A row Postfix itself refused no longer links to the filter lists. Tests: the page fixture and view tests for the sheet's markup and content (TestWhyRows), the link rule, three Deny and two Allow on the mockup's six rows; e2e reads "Decided by" and "Reply" from the sheet and wants no sender link on the refused row. Seen: the fixture page with a sheet open, headless Edge at 1360 px - the same as the accepted drawing. Checked on the test server, uncommitted tree: go vet ./... ok, go test ./... ok (22 packages), make e2e ok. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
56c5dfee40 |
inbound-antispam-panel: Inbound > Log and Inbound > Filter lists
Step 6/12 of docs/plans/inbound-antispam-panel.md. Written by a Sonnet
subagent from the mockups, reviewed and corrected by me.
GET /inbound/log - the journal a page at a time (50), filtered by
domain, decision and day; QueryInboundSpam / CountInboundSpam with the
viewer's inbound domains as the scope. The global role reads all of it
and gets "Deny sender" / "Allow sender" links into the lists; a user
with the domain role reads the rows of the inbound domains assigned to
them, without the links. The plan said global-only for the journal;
the accepted mockup and 2.0's delegation of Inbound say otherwise -
recorded in the plan as built.
GET, POST /inbound/filter-lists and POST .../{id}/delete - global role,
404 otherwise. Add form (prefilled from the query), the two lists with
Remove as the kit's row action, and "Where the lists go" with the
filter's state and when the maps were last written
(Lists.LastWritten). A refused or duplicate entry is 422 with the
message and what was typed.
Server > Settings: "Keep inbound log rows, days" with the relay on.
Help: Inbound log, Filter lists. Navigation: Log for everyone who sees
Inbound, Filter lists for the global role (Shell.ShowFilterLists).
Status tags accept / reject / tempfail join the kit's mapping.
Tests: page fixtures for both screens, held to outlines.json; view and
handler tests (both roles, filters, paging, relay off, add / duplicate
/ invalid / delete, map file content, settings field, help). e2e reads
the journal from the page instead of the database and adds and removes
a deny entry through the panel, reading deny_domain.map after each.
Seen: both pages and Settings rendered from their fixtures and compared
with the mockups side by side (headless Edge, 1360 px) - same layout
and wording.
Checked on the test server, uncommitted tree: go vet ./... ok,
go test ./... ok (22 packages), make e2e ok.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
eea40bcd49 |
inbound-antispam-panel: filter lists, written as rspamd maps
Step 5/12 of docs/plans/inbound-antispam-panel.md.
Store: AddSpamListEntry, ListSpamListEntries, DeleteSpamListEntry.
internal/inbound/lists.go validates and normalises an entry - sender
address, sender domain, client address or network (canonical text, an
IPv4-mapped address as IPv4, /0 refused) - and writes the lists as six
map files under /data/antispam (ANTISPAM_DIR), each atomically, 0644 in
a 0755 directory: the filter is another user in another container. All
six are written on every change and on every start with the relay on,
empty ones included. An entry whose maps could not be written is taken
back out of the table. The writer refuses a stored value with
whitespace, a newline or # in it.
The plan's allow.map / deny.map became one file per list and entry
type: to rspamd an IP map and a sender map are different map types.
deploy/antispam/rspamd/multimap.conf holds the rules; the fragment
mounts it and ./data/antispam into the sidecar. Deny is a prefilter
reject, allow a symbol weighing -100. Tried in a throwaway rspamd 3.11
container on the test server:
- with allow as a prefilter accept, an address on both lists was
accepted and an IP on both was refused - the rule that ran first
decided; with the weight, deny won in all five mixed cases;
- IPv4, IPv6, address (any case), domain (not its subdomains) match;
- a rewritten file is reread in about ten seconds, no restart;
- files that appear after rspamd started are loaded the same way.
No page edits the lists yet (step 6).
Checked on the test server, uncommitted tree: go vet ./... ok,
go test ./... ok (22 packages), make e2e ok - with the relay on
/data/antispam is 755 and holds the six maps, 644, empty.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
27fd355e53 |
inbound-antispam-panel: refused inbound mail from mail.log; retention
Step 4/12 of docs/plans/inbound-antispam-panel.md. The log tailer writes an inbound_spam_log row for mail port 25 refused (internal/logtail/inbound.go): a "reject:" line of the port-25 smtpd is Postfix's own policy; a milter-reject / milter-hold / milter-discard line of cleanup is the filter's verdict. Only a recipient at an inbound domain is a row, so "Relay access denied" for a stranger's domain is not. The row is dated by its log line; the reply text is cut to 255 bytes of printable ASCII; a reply starting with 4 is a tempfail. To tell port 25 from 465 / 587 the listener now logs as postfix/inbound (syslog_name). cleanup logs under one name for every listener, so its verdict counts only for a queue id the port-25 smtpd was seen to open (4096 remembered). Lines are matched from the head, after timestamp and host: their tail is the sender's own text. Retention: PruneInboundSpam every six hours - older than the inbound_spam_log_retention_days setting (seeded from INBOUND_SPAM_LOG_RETENTION_DAYS, 90, range 7-365), then down to 10 000 rows. The setting has no field in the panel yet. Known limits, in architecture.md: a log line names one recipient, so a message refused at end-of-message is one row; a line re-read after an unclean stop would be a second row. Checked on the test server, uncommitted tree: go vet ./... ok, go test ./... ok (22 packages), make e2e ok - the unknown recipient at the inbound domain refused on port 25 has its row (reject by postfix), the stranger's domain has none. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
28ec784ae2 |
inbound-antispam-panel: inbound journal milter on port 25
Step 3/12 of docs/plans/inbound-antispam-panel.md. The panel serves a second milter while the inbound relay is on (internal/milter/inbound.go, socket INBOUND_JOURNAL_MILTER_SOCKET, default /run/selfpost/inbound-journal.sock). build/postfix-config.sh puts it last on port 25, after the optional antispam milter, with default_action=accept; postfix-wrapper.sh waits for its socket. At end-of-message it writes one inbound_spam_log row per recipient at an inbound domain - other port-25 recipients (DMARC report addresses) get none - and always accepts. With a filter attached it reads the verdict from X-Rspamd-Action and X-Spamd-Result (action, score, up to six weighted symbols, only what the patterns recognise, 255 bytes); without one those headers are the sender's and are not read. The plan named X-Rspamd-Score, which rspamd does not have. The antispam compose fragment mounts rspamd/milter_headers.conf into the sidecar so that it adds the two headers (checked in rspamd 3.11: both routines exist and remove a sender's own headers of those names). Store: InsertInboundSpam, IsInboundDomain. Checked on the test server, uncommitted tree: go vet ./... ok, go test ./... ok (22 packages), make e2e ok - the relayed message of inbound_relay_delivers_and_refuses has its journal row (accept by selfpost) and the DMARC report sent through the same listener has none. Not yet seen in a real run: a verdict written by rspamd reaching this milter. The e2e stand has no filter, and the test server's only inbound domain has no upstream, so it accepts no mail. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
8496b289ec |
e2e: the run ends on port 25, with a report, junk and inbound mail
Until now the suite only read back the configuration generated for the two optional port-25 features. DMARC ingest shipped in 1.7.0 with a delivery service Postfix could not start, and nothing sent a report through it until a real one arrived on the test server on 2026-10-11. The last steps recreate the container with INBOUND_RELAY_ENABLE and DMARC_REPORTS_ENABLE on, over the same /data, and talk to port 25 as a stranger's mail server: - the container log has no postconf warning, the session survives; - a domain takes the SelfPost-hosted report address; a gzip report mailed to it appears under Outbound > DMARC reports; an address nobody chose is refused at RCPT; - a report on another domain and a message with no report are accepted, dropped with "dropped: ..." on their delivery lines, counted as two parse failures, absent from the queue and from the reports; - an inbound domain with the sink as upstream and one listed recipient: mail for it reaches the sink, another recipient and another domain are refused at RCPT. The stage directory now holds docker-compose.yml and .env, as an operator's project directory does (a full backup needs them; the restore scenario that uses it is not in this commit - the panel's full backup turned out not to work, see the next one). make e2e on the test server: ok. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |