8b2dc8f40fc39514ae6fa0d4bc2b8b3ab963a097
10
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  mixandClaude Opus 5.5
|
668e299c69 |
postfix: no reload for a map that did not change; DNS re-checks limited (audit W6/M9)
Security audit 2026-10-17, findings W6/M9 (low), stage 4. Every application, upstream, recipient or report-address save reloaded Postfix through supervisord, and POST .../dns-recheck bypassed the five-minute cache for up to ~14 resolver queries - both at whatever rate an authenticated user pressed. - writeChanged: each generated map is written only when its content differs from the file on disk, and Postfix is reloaded only when one was (sender map, inbound maps, DMARC maps). Health's Reload configuration ends with an explicit reload (app.Service.ReloadPostfix, SenderMaps gains Reload), so it still re-reads whatever is on disk. No debounce: with unchanged saves gone, a burst is real changes Postfix must see. - auth.AllowDNSRecheck: twenty forced re-checks in 15 minutes per user; past that the outbound, inbound and settings re-check show the cached result without the "re-checked" flash, and the log says why. Tests: TestARebuildThatChangesNothingDoesNotReload, TestDNSRechecksArePerUser; the fakes gain Reload. Docs: guide § Overview and Health; CHANGELOG; plan. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
1c6e04b7d3 |
base-trixie: the image on Debian trixie, Postfix 3.10.13; Received: hidden on 465/587
test / test (push) Canceled after 0s
The runtime base is debian:trixie-slim, the build stage golang:1.26-trixie:
Postfix 3.10.13 with upstream's 2026 security fixes up to the August
batch, libmilter 8.18.1, OpenSSL 3.5. Every citation of another program in
code, scripts and documents was re-read against the trixie sources
(dev/upstream; bookworm's kept in dev/upstream-bookworm) and updated;
development.md's cited-package table holds the trixie versions.
What the re-reading changed in behaviour:
- logtail: reject lines with sasl_method/sasl_username/sasl_sender
(smtpd_check.c:1019-1026); cleanup's "removed (canceled)" forgets a
port-25 id (cleanup_api.c:363-364).
- internal/postfix/retry.go reads postconf's stdout only: since 3.9 a
deprecated-parameter warning on stderr made one value too many and the
panel fell back to the compiled-in retry policy.
- logrotate-loop.sh: logrotate 3.22 exits 1 when it ignores a config;
the loop refuses on that output whatever the status.
- postfix-config.sh: cyrus_sasl_config_path set explicitly (bookworm's
07_sasl_config.diff is gone); maillog_file_permissions=0640; mynetworks
explicit; Dockerfile: SYNC_CHROOT= in /etc/default/postfix,
opendkim-tools dropped, openssl named, systemd-standalone-sysusers so
cron does not bring the whole of systemd.
- The selfpost group is 10998, outside the system range 100-999: in
trixie a package took 998 and the build failed (owner's decision:
a conflict-free id, the distribution's own ids untouched). The
entrypoint hands /data back by name when the user or the group differs.
Guide, backup refusal text, help (design commit
|
||
|
mixandClaude Opus 5.5
|
9eddd49602 |
audit 2c: findings of the two reviews
test / test (push) Canceled after 0s
Technical review (Opus, 11 findings, 2 medium) and security review (Fable, no high or medium) of 3c86280..HEAD. Both confirm the port gives dkim_mail_parse()'s result on every input it parses, and that no line the check passes is signed with another domain's key. - F1 (medium): OpenDKIM's parser takes lines no mail program reads as one address - "ceo@bank.com:me@mine.com", "Name <ceo@bank.com:me@mine.com>", "<b@evil.com, a@mine.com>", "ceo@bank.com <me@mine.com>", "ceo@bank.com@mine.com" - and signs for the last while a lenient reader shows the first. The line must now also be one address in RFC 5322's grammar (net/mail, display names in any charset passed through), at the domain OpenDKIM signs for. A quoted display name may still hold anything. - F2 (medium): the bindings were asked about OpenDKIM's form of the address, quotes and all, so "x"@mine.com passed for an application holding @mine.com while x@mine.com belonged to another. They are now asked about the reader's address, its local part unquoted, as Postfix holds the envelope's. - F3 / security (low): Bindings.Allowed and DomainOf fold case in ASCII only: Postfix folds as Unicode (casefold.c, ICU), but every key and login the panel writes is ASCII, and the Unicode fold let the Kelvin sign pass for "k" (net/mail then refuses such a line on the domain test). - F4 (low): a TERM between "postfix start-fg &" and "child=$!" is no longer lost: the wrapper stops Postfix as soon as the pid is known. - F5 (low): for startsecs after a start any failed reload passed as "not running". postfix-reload is now build/postfix-reload.sh: exit 75 when master -t says no master runs, else exec postfix reload; RunOnce returns EndError with the status, and only 75 is taken as done. supervisor.State goes. - F6 (low): crashexit spares postfix-reload too - a reload that could not be spawned is reported to whoever asked, not a reason to stop the container. - F7 (low): a certs/ that is itself a link is resolved before the walk (filepath.WalkDir does not follow its root). - F8 (low): at shutdown the tailer reads what is left of the rotated file before saving its place. Not changed: a refusal line still waiting on the old file at shutdown is not kept - the panel writes refused rows itself, only a kill loses one, and that window is the minute's grace. - F9 (low): pct read as text - empty or unreadable is 100, the rest held to 0..100. - F10 (low): the directory is synced after sasldb2's rename. - F11 (low): POSTFIX_STARTSECS by expr, so "010" or "08" in MILTER_WAIT_TIMEOUT are decimal, not octal or an error. - Security (low): pagehide also empties defaultValue - the input's value attribute and the textarea's text - not only .value. A sasldb2.new left by a killed panel is removed at start (entrypoint) and never archived. security.md says that links under certs/ are followed and by whom they can be placed. Tests: sender check cases for F1 (four lines), F2 (a bound address quoted, for its owner and for another), F3; EndError's state and status; pct cases. architecture.md and CHANGELOG describe the reader rule. Stand (2026-10-15, make e2e, exit 0); go vet and go test ./... pass on the server (24 packages). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
f2ad699473 |
supervision as supervisord does it: Postfix stopped, give-ups FATAL, reload's exit read
test / test (push) Canceled after 0s
C-P42. postfix-script's start-fg runs master as its child and master calls setsid() (Postfix 3.7.11, conf/postfix-script; src/master/master.c); supervisord signals the pid alone (supervisor 4.2.5, process.py, Subprocess.kill()). A stop of program postfix left master running - a restart then found "already running" - and a container stop cut Postfix off with SIGKILL. The wrapper now stays the parent of "postfix start-fg" and on TERM/INT runs "postfix stop", asking again while start-fg is still in its checks (master -t). stopwaitsecs=15. C-V6. The wrapper's give-up on the milter sockets came after the default startsecs, so it was EXITED and restarted for ever. startsecs is now MILTER_WAIT_TIMEOUT + 10, exported by the entrypoint as POSTFIX_STARTSECS and expanded by supervisord (options.py, processes_from_section(); a non-number MILTER_WAIT_TIMEOUT stops the start): a give-up is "Exited too quickly", BACKOFF, FATAL after startretries, crashexit. For those seconds after each start the program is STARTING (the healthcheck's 90 s start period covers it; the sender check counts no downtime then). C-V5. logrotate had startsecs=0, so a refused config restarted it every second for ever. startsecs=1: FATAL after startretries; crashexit reads the event's processname and leaves logrotate's FATAL on Server > Health. B-U2. "supervisorctl start" returns when a startsecs=0 program is RUNNING, not when it ends, and mapped "already started" to success. The panel now speaks supervisord's XML-RPC itself (internal/supervisor, RunOnce): startProcess without waiting, getProcessInfo until it leaves STARTING/RUNNING, exitstatus 0 or an error; a run in progress is waited out and one of its own follows. A failed reload while program postfix is not RUNNING is logged, not an error: the next master reads the files. C-V10: postfix-reload rests EXITED after a run; the e2e process check takes STOPPED or EXITED. C-P34: the dead "postfix set-permissions" branch goes - postfix check's create-missing builds the queue tree. Stand (2026-10-14, make e2e, exit 0; MILTER_WAIT_TIMEOUT=10 on the stand): new supervision_stops_postfix_and_gives_up - supervisorctl restart postfix writes postfix-script's "stopping the Postfix mail system" and leaves one master; with the panel's sockets removed, start answers "postfix: ERROR (spawn error)" (finish() sets spawnerr "Exited too quickly", onwait() reads it first) and Postfix comes up once the panel is back; a group-writable logrotate config ends FATAL with the container up; the panel's Reload configuration answers only after mail.log has "refreshing the Postfix mail system", postfix-reload EXITED. session_survives_restart sees the stop line for the container's restart. Measured: master's own "terminating on signal 15" never reaches mail.log (master TERMs its group, postlogd included, before it logs). go vet and go test ./... pass on the server (24 packages; new unit tests of RunOnce against a fake supervisord). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
55aef6e721 |
sender check: the sender map read and looked up as Postfix does it
Postfix 3.7.11 takes the owners of the first key mail_addr_find() finds -
the address, then without its extension, then @domain, each tried only
when the one before is absent (src/global/mail_addr_find.c,
mail_addr_find_opt()) - and compares the login with them by
strcasecmp_utf8() (src/smtpd/smtpd_check.c,
reject_auth_sender_login_mismatch()). The check accepted a From: address
when any of the three keys named the application: an application holding
@domain could write an address listed for another application of the
domain, which Postfix refuses it in the envelope, and have it signed
(assumptions B-PS1).
The table is now read as dict_thash_open() reads it: continuation lines,
owners split on commas and blanks (B-PS4), the key ending at the first
blank outside quotes, keys folded; a key given twice makes Postfix refuse
the whole table (no DICT_FLAG_DUP_* flag), and the check then defers too.
The writer folds keys, so two cases of one address cannot be two lines.
e2e on the stand (2026-10-14, make e2e, exit 0): the wildcard application
is refused billing@ - listed for app-list - in From: (550 5.7.1), and in
the envelope by Postfix at RCPT ("553 5.7.1 <billing@...>: Sender address
rejected: not owned by user"). go vet and go test ./... pass on the
server (23 packages).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
b113e72c71 |
milter, postfix, app, domain: cite the source of what they rely on (assumptions part B)
Comments only, no behaviour changed. go-milter v0.4.1 (session.go: one session per connection, replaced after a non-continue reply; macros per stage), Postfix 3.7.11 (milter8.c, smtpd_check.c reject_auth_sender_login_mismatch(), mail_addr_find.c, showq_compat.c, mail_conf_time.c, mail_params.h), Cyrus SASL 2.1.28 (saslpasswd.c, plugins/sasldb.c: deleting a missing login is not an error), OpenDKIM 2.11.0~beta2 (opendkim-db.c, opendkim-genkey), Berkeley DB 5.3 db_dump, rspamd 3.11.0. Comments that claimed what the source denies are corrected (sasldb keeps the password as given, not hashed; an embedded newline is kept, not truncated; rspamd sorts symbols by absolute weight); fixtures say seen or composed. The sender check's From: parsing gets no citations: it is replaced by the port of OpenDKIM's dkim_mail_parse next. Contradictions left for their own commits: B-G5 cleanAddress, B-PS1 first key wins, B-PQ1 the forced-expire flag, B-PQ10/PQ11 Postfix's time units. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mix
|
7ef7f75246 |
release: 1.9.2: Review pass: port-25 milters, DMARC validation, rate-limit fix
Review pass over `1.4.0`…`1.9.1`: port 25 no longer shares the submission milter chain, DMARC reports are validated before they are stored, and the auto rate limit is correct for a non-default level-1 window. Schema migration `0010` (index only). Upgrading is a tag bump. Added: - SQLite migration `0010_send_log_app_login_index.sql` — - DMARC aggregate reports are accepted as **zip** as well as gzip or plain XML - e2e: `checkPort25ConfigCombinations` regenerates the Postfix configuration Changed: - README hero line and a **Positioning** block in `docs/product.md` record the Fixed: - The setup account's password is hashed at bcrypt cost `12` like every other - Login/setup rate limiter: protecting blocked buckets from eviction is now - `postqueue -p` output is bounded to 4 MiB (the timeout alone left the size of - [schema-migrations.md](docs/schema-migrations.md): the schema section was - postqueue reader is now time-bounded: `postqueue -p` runs under a 5-second … (11 more in CHANGELOG) Changed: - [roadmap.md](docs/roadmap.md) now carries everything the 2026-08-19 code - Extracted `internal/configsafe` — the empty-value and forbidden-character - Build, deploy and migration comments no longer cite the archived - Dropped the `parseDomainRateLimitForm` / `parseAppRateLimitForm` pass-through - Extracted shared helpers: `internal/atomicfile` (atomic temp-write+rename) and … (7 more in CHANGELOG) Removed: - Unused legacy asset `docs/assets/icon.png` (superseded by the four brand SVGs - Plan documents for already-shipped features: `domain-stats-auto-ratelimit`, Full detail: CHANGELOG.md (1.9.2). |
||
|
mix
|
0730b2090e |
release: 1.3.0: 1.3.0-1.3.1: security pass, queue persist, full backup layout
[1.3.0] Security and quality after 1.2.5: domain-admin send-log authorization, fail-closed sign-in and application delete, level-2 rate-limit race fix, restore Resync, expanded tests, operator docs, release CI, and OFL for IBM Plex. Upgrading from 1.2.x is a tag bump; no migration. Added: - licence: the SIL Open Font License 1.1 text now travels with the IBM Plex - docs: agreed roadmap item **queue-retries** — show this Postfix's retry Security: - The independent security review of the send-log authorization and Fixed: - test (e2e): send-log status scrapers follow the badge markup in - security (panel): the Deliveries list is scoped to a domain administrator's - mail (level-2 rate limit): the ceiling is no longer overshot by messages that - panel (sign-in): a session that cannot be written to the database no longer - panel (applications): deleting an application removes its SASL credentials … (2 more in CHANGELOG) Changed: - docs: operator and as-built docs aligned with the code after a full - docs: [guide.md](docs/guide.md) reorganised into **Installation**, **Instance - docs: the 2026-08-13 full-tree review plan is complete — every phase (P0–P7) - licence: [NOTICE](NOTICE) tells modifiers to update `SourceURL` in - ci: the release image is published only for a **published** GitHub Release … (9 more in CHANGELOG) [1.3.1] Retry policy in the panel, persistent Postfix queue, and self-contained full backups. Mail queue and delivery history show this Postfix's first retry, backoff cap, and queue lifetime. Deferred mail survives container recreate. Full backups now archive `data/`, compose, `.env`, and `certs/`; the archive layout breaks 1.3.0 flat backups (unpack those with `tar xzf backup.tar.gz -C ./data` as before). Upgrading from 1.3.0 is a tag bump; no schema migration. Added: - Mail queue and a delivery's history show this Postfix's retry policy - docs: **Plan checklists** in [development.md](docs/development.md) — format, - docs: **Implementation checklists** with model routing in - docs: roadmap candidates **send-log-retention** (panel Settings for delivery - Postfix queue under `/data/postfix/queue` — deferred and active mail survive … (1 more in CHANGELOG) Changed: - **Breaking:** full-backup archive layout — paths are prefixed with `data/`; - docs: operator guide, architecture, security, and backup UI updated for - docs: HTML mockups for a full panel UI refresh Changed: - docs: panel UI mockups after review — Status restored to live readings - docs: panel UI design system and mockups rebuilt as separate pages - docs: panel UI mockups — add-domain sits in the list card (Domains and Fixed: - ci (GHCR): per-arch package tags (`X.Y.Z-amd64`, `X.Y.Z-arm64`) are dropped Squashed CHANGELOG sections: [1.3.0], [1.3.1]. Full detail: CHANGELOG.md (1.3.0, 1.3.1). |
||
|
mix
|
5e5d157496 |
release: 0.5.0: Pre-1.0 security review, domain-admin role, doc consolidation
A bounce could be recorded as a successful delivery. The log-tailer's Fixed: - A bounce could be recorded as a successful delivery. The log-tailer's - Log-tailer resumes where it stopped instead of jumping to end-of-file on - Level-2 rate limit no longer overshoots under concurrency: messages that Changed: - The project has a single public home: `github.com/mixeme/selfpost`. Codeberg - Code comments no longer cite the archived specification. References like - `docs/code-review.md` is gone. Its plan is finished — phases 0 (bar the - `docs/architecture.md` gained a *Code layers* section: a diagram of - Phase 1 doc/code hygiene (`docs/code-review.md`): removed ~30 stale … (1 more in CHANGELOG) Security: - Pre-release security review (plan § D, model Fable, 2026-08-06): full pass - `saslpasswd2` argv: the application login is now passed after a `--` Added: - Optional password encryption for the two secret-bearing downloads (plan - Domain import accepts an encrypted export: the envelope is detected by its - `selfpost-backup` writes encrypted archives and reads them back: - `TestParseDelivery` covers the exotic mail.log shapes the review asked for - docs: README *Encrypting a backup or export*; `docs/security.md` § … (14 more in CHANGELOG) Removed: - docs: `security.md` — accepted risk «restore old backup revives session rows» Changed: - docs: `implementation-plan.md` trimmed to the sole open v1.x gate — pre-release - docs: `architecture.md` — sessions (SQLite, idle renew, password change), - docs: `development.md` — expanded e2e stack and `release.yml` matrix workflow. - docs: `security.md` — accepted risk for send-log rows stuck at `queued` after - docs: `roadmap.md` — optional send-log / `mail.log` follow-ups under v1.x tail. … (10 more in CHANGELOG) Full detail: CHANGELOG.md (0.5.0). |
||
|
mix
|
8ce050ef7f |
release: 0.1.0: Phases 0-11: panel, Postfix/DKIM, milter, backup, Docker image
Initial feature-complete implementation of the v1.0 specification (phases 0-11 of `docs/implementation-plan.md`). Added: - Panel (Go, single static binary) with SQLite persistence, one-time - Domain management with per-domain DKIM (RSA-2048, generated in pure Go) and - Application (sender identity) management: SASL credentials via `sasldb2`, - Full Postfix relay config generated from env at container start: SMTPS 465, - Journal milter (pure Go, `go-milter`) recording every send to `send_log`; … (6 more in CHANGELOG) Full detail: CHANGELOG.md (0.1.0). |