98e09fef4ad8d7d4840848027265b71a81fbc85b
5
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  mixandClaude Opus 5.5
|
610023ef6a |
panel-redesign: Inbound domains, domain and delete on the kit; Spam filter box
Stage 2, step 5. Written by Sonnet, reviewed by Opus.
- Three pages named after their mockups: in-domains, in-domain,
in-domain-delete, with typed page data (view/inbound.go), fixtures
and tests. The engine pages inbound, inbound_domain and
inbound_delete are gone with their templates and are off
legacy_pages.txt.
- The Spam filter box (plan, Who sees what). The panel now reads
INBOUND_ANTISPAM_MILTER and INBOUND_ANTISPAM_MILTER_ACTION, with the
semantics of build/postfix-config.sh (on only with the inbound relay
on and a milter set; accept | tempfail). It reports them, nothing
more:
on Applies to / Filter (the address, global role only) / If the
filter is down (accepted unfiltered | deferred)
off one sentence; the variable is named for the global role only
The list shows "Spam filter on|off" in its head.
- Handlers pass typed data; routes, POST targets, field names,
validation and authorization (global: all inbound domains; domain
role: the assigned ones, another tenant's id is a 404; add and
delete are global-only) are unchanged. A test saves the upstream and
recipients forms untouched and finds the domain unchanged.
Left out of the mockups' Spam filter box and menu - no source before
inbound-antispam-panel (2.1): the engine name, the quarantine row, the
"refused at the door, see the log" row, the lists row, "Log for this
domain". Also "Checked N min ago" on the MX box: the check carries no
time.
Not done: the filter's socket on Health and Overview. internal/health
checks a unix socket by stat; the documented form of the filter's
address is inet:host:port and needs a dial that does not exist yet.
Differences from the mockups, for the owner:
- refusals and confirmations are the kit flash above the boxes;
- the MX tag is coloured by the check in every state; an MX that
points elsewhere shows "In DNS now";
- the lead of the domain page follows what is saved ("Not accepting
mail yet: no upstream is saved");
- the delete page lists only what the domain has;
- /help#inbound opens Help at the top until the Help step.
Evidence
- docs/assets/panel-redesign/evidence/in-domains.png, in-domain.png,
in-domain-delete.png: 1440 px wide, headless Edge, real templates
served locally with their fixtures (filter on) - NOT from the
container (no Docker on this machine).
- panel/audit.js on the three pages at 1440 and 1280: 352 texts
checked, problems: [].
- That the panel process sees the two variables inside the container
is read from supervisord.conf and entrypoint.sh, not run.
- go test -count=1 ./internal/web/... ./cmd/panel
ok internal/web
ok internal/web/auth
ok internal/web/handlers
ok internal/web/validate
ok internal/web/view
ok cmd/panel
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
acdfaaecd7 |
panel-redesign: Outbound domains, domain, settings, application on the kit
Stage 2, step 3. Written by Sonnet, reviewed by Opus.
- Six pages named after their mockups: out-domains, out-domain,
out-domain-settings, out-app, out-app-created, out-domain-delete,
with typed page data (view/outbound.go, outbound_app.go), fixtures
and tests. The engine pages dashboard, domain_detail and
domain_delete are gone with their templates and are off
legacy_pages.txt. GET .../settings has its own handler.
- Handlers pass typed data; routes, POST targets, field names,
validation, authorization (both roles, another tenant's id is a 404)
and Cache-Control: no-store on the password page are unchanged.
- Kit, attribute only: Action.Confirm writes data-confirm on a POST
action's form (panel.js already reads it).
- test/e2e/panel_client.go scrapes the new markup (copy fields, the
application row's Edit link). Not run: no Docker here.
Fixes found on the way
- Report address of a domain that follows another user's default: the
select had one "inherit" option, selected, so saving the form
untouched moved the domain to whoever saved it. It now offers that
user's default as "keep" (selected, saves nothing) and "My default
instead" as the change, as the mockup draws it; "keep" on a domain
that does not follow someone else is refused.
- panel.js: syncShowWhen stopped at the first matching rule, so the
auto-limit fields were never toggled with the limit mode. Every
matching rule applies now.
Differences from the mockups, for the owner:
- application rows carry Edit only. New password and Delete are POSTs,
and the kit has no link-styled POST control for a table row; both are
in the application page's head with a confirmation. Drawing them in
the row needs a design: change (as Sign out was);
- the application login is read-only on edit (the handler refuses a
rename); the submit says Create application on the empty form;
- multiplier bounds are the store's 1.5-5, default 2.5;
- "Recalculate" buttons exist where the stored limit is automatic;
- a domain administrator has no add box and no Delete; Delete domain is
global-only on the domain page and on settings;
- a fourth record, Report authorization, appears when the report
address is on another domain; record states missing / weak / not
checked are tags with the explanation under the value;
- refusals are the kit flash above the first box, and those of the
settings forms now show on the settings page; successful saves still
redirect to the domain page;
- the export checkbox is ticked by default, as drawn.
Evidence
- docs/assets/panel-redesign/evidence/out-domains.png, out-domain.png,
out-domain-settings.png, out-app.png, out-app-created.png,
out-domain-delete.png: 1440 px wide, headless Edge, real templates
served locally with their fixtures - NOT from the container (no
Docker on this machine). Taken before the report-address fix, which
does not change what the fixture renders.
- panel/audit.js on the six pages at 1440 and 1280 (text inside
[hidden] blocks skipped): 866 texts checked, problems: [].
- go test -count=1 ./internal/web/...
ok internal/web
ok internal/web/auth
ok internal/web/handlers
ok internal/web/validate
ok internal/web/view
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
b6feac2200 |
panel-redesign: the application form is one POST, under its domain
Stage 1, step 4 (plan § Routes).
Service (internal/app)
- Settings{Mode, Addresses, AuthIPRestrict, AuthAllowedIPs, Limit} is what
the form holds besides the login. CreateWithSettings creates the
application with all of it and removes it again if a later write fails;
SaveSettings validates the sender rule first and, if a later write
fails, puts back what it had already changed. The form produces a whole
application or leaves things as they were.
- Limit.Mode "" is "use the domain limit"; auto takes its ceiling from a
recalculation the caller supplies.
Routes and handlers
- GET, POST /outbound/domains/{id}/applications/new
GET, POST /outbound/domains/{id}/applications/{aid}
POST .../{aid}/password, .../{aid}/ratelimit/recalc, .../{aid}/delete
replace POST /domains/{id}/applications and the six /applications/{aid}/*
routes. lookupDomainApplication answers 404 when the application is not
in the domain named by the path - also when the caller may open that
domain.
- A generated password is the response to its POST only (no GET path) and
is sent with Cache-Control: no-store.
- The login is not renamed by the form; a changed login is a 400.
Old domain page: the three per-application forms (mode, IP restriction,
limit) are one form with one Save; "Remove limit" became the "Use the domain
limit" choice. The e2e client follows (edited, not run here).
Tests: service - create and save in every limit mode, and all-or-nothing on
a refused sender rule, a failed recalculation and a failed sender-map
rebuild; handlers - the form's parsing, one POST creating sender + IPs +
limit, four kinds of refused form creating nothing, save, the no-store
header on both password pages, and five application routes against another
tenant's application addressed through its own domain and through the
caller's.
With @routes removed by hand TestRoutesFollowNavigation now reports only
GET /server/health (step 5).
go test ./... green except the two Windows-only failures in internal/domain
and internal/logtail.
Roadmap 14/27.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
bd746c61d7 |
panel-redesign: paths follow the menu; Account and Server settings split
Stage 1, step 3 (plan § Routes). BREAKING: every panel URL changes and the
old paths are removed without redirects.
Routes (web.go)
- /status -> /overview; /domains -> /outbound/domains with the domain's
settings actions under .../settings/ (reports, ratelimit, export);
/deliveries -> /outbound/log; /mail-queue -> /outbound/queue; /dmarc ->
/outbound/dmarc; /inbound -> /inbound/domains; /system-log ->
/server/log; /backup -> /server/backup (import under it); /users ->
/server/users; recheck and reload under /server/health/.
- One fragment name: <page>/fragment everywhere.
- Everything under /server/ is registered through server(), which wraps
the handler in globalOnly: the subtree is guarded once, where a new
route cannot forget it. Handlers keep their own requireGlobal.
- GET / leads to /overview, /outbound/domains or /inbound/domains.
- The /account -> /settings redirect is gone with /settings.
Account and Server > Settings
- handlers_account.go: GET /account and three POSTs - profile (username,
e-mail; no password asked, as designed), password (current password,
rate-limited like a sign-in, signs out other sessions), dmarc (the
user's default: hosted / account / custom / none, each validated).
This replaces step 1's bridge through the old Settings form.
- handlers_settings.go is the instance's page only: log retention and the
read-only rate limits, global role.
- One legacy template serves both pages by a flag until stage 2 gives each
its own: a new legacy page cannot be added to the ratchet.
Still to come inside stage 1, and why @routes stays on the ratchet:
- step 4: the application routes (one POST, under the domain);
- step 5: GET /server/health.
With @routes removed by hand TestRoutesFollowNavigation reports exactly
those and nothing else - no template links to a path the router lacks.
Old templates, tests and the e2e client are retargeted. The e2e module was
edited but not run here (no Docker, and its dependency could not be
downloaded on this machine).
Tests: Account (page, profile, password, DMARC default in every mode, a
domain administrator's own row only), Server settings (saved without a
password, range, global only), the /server/ subtree answered 404 by the
router for a domain administrator with All on both lists and for no
principal.
go test ./... green except the two Windows-only failures in internal/domain
and internal/logtail.
Roadmap 13/27.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
3b86f6c3b6 |
panel-redesign: inbound is delegated per user, separately from outbound
Stage 1, step 2 (plan § Who sees what).
Store
- Reach{AllDomains, DomainIDs, AllInbound, InboundDomainIDs} is what a
domain user is assigned. CreateUser takes it; SetUserReach / ClearUserReach
replace SetUserDomains / ClearUserDomains and write both directions in one
transaction. A domain user with nothing on either list is refused
(ErrEmptyReach). With All set the rows of that direction are not stored,
so clearing All later brings nothing stale back.
- ListDomainsForUser honours all_domains; ListInboundDomainsForUser is its
inbound twin. Both filter in the query.
Authorization
- auth.Principal carries the whole reach: CanAccessDomain (now also true
with All), CanAccessInboundDomain, HasOutbound, HasInbound. An id or a
name on one list opens nothing on the other.
- Inbound handlers in three strengths: requireInbound (the list, filtered),
requireInboundDomain (one domain: page, DNS re-check, upstream,
recipients), requireInboundGlobal (add, delete confirm, delete). All
answer the same 404.
- domainIDSet and the DMARC report pages go through the principal instead
of looking at p.Domains themselves.
Panel (old templates, until stage 2)
- User form: two lists with All; inbound is offered only where the feature
is on, and saving the form with it off keeps the user's inbound reach.
Promotion to global drops the reach.
- Menu: a group with nothing assigned is absent; / sends an inbound-only
administrator to Inbound. The inbound pages hide add / delete from a
domain administrator.
Tests: every route of one inbound domain against five kinds of refused
request (another tenant's id, a missing id, outbound-only reach, an outbound
domain with the same id, one with the same name, no principal) with the 404
bodies compared; add/delete as every non-global user; the filtered list
including a domain added later; thirteen outbound routes against another
tenant's domain and application id; the user form; the reach in the store;
the principal matrix; the menu; the home redirect. Removing the access check
or the query filter makes the tests fail (checked by hand).
go test ./... green except the two Windows-only failures in internal/domain
and internal/logtail that predate this work.
Roadmap 12/27.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|