a27f8332abd40829553742391954f5fef1beb511
10
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  mixandClaude Opus 5.5
|
6023feb405 |
audit 6: documents, comments, dead code and staticcheck; the test gaps closed
test / test (push) Canceled after 0s
The last stage of the 2026-10-12 audit; no cut. Doc drift: architecture.md (the sender check in § OpenDKIM, the limit: row's 48 hours, the inbound log and filter-list routes and who may open them, migrations to 0011 and every table, KitPage as production data, Reload configuration as a restore writes, the panel's roles counted), schema-migrations.md (tables and columns since v2), guide.md (a delivery's lines go at the next prune; INBOUND_JOURNAL_MILTER_SOCKET moved to architecture.md's internal list), development.md (the env guard, the deferral the e2e proves, its fixed sleeps), roadmap.md. Comments say what the code does now; TestBaselineIsTheOnlyMigration is TestChainStartsAtTheBaseline; the milter package doc names its three milters. Dead code gone: view.Facts, dmarc HostedSuggestion and ValidateHostedAddress, app UpdateMode (each with the test that alone kept it), the method checks the method-bound routes made dead; Settings.WithResult calls resultFlash. staticcheck 2026.1 in test.yml on both modules, clean: the e2e package builds without its tests now (a test and two constants moved out of non-test files), three findings fixed. The test moved, TestImageBuildPreservesLogrotateMode, had sat in a non-test file and never run; run, it failed on the entrypoint (docker run without a hostname) and now asks with --entrypoint stat. The test gaps no step named, each closed: follow() with mail.log gone past blindMin and made again; CheckRestore with a manifest that is not JSON; the origin check with a port; every /server/ pattern in web.go through server() and in the routes table (it found GET /server/health/fragment missing from the table - guarded, not tested); L9 as the owner decided it on 2026-10-12, the comment on senderSession.Headers and the test passing an h that holds the earlier messages' From:. Plan stage 6 ticked; roadmap audit row done, 81/81. Tested on the test server: go vet + go test of 27 packages, make e2e (all pass, 513 s) on this tree; staticcheck locally on both modules. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
ad3d834392 |
store, web: cite the source of what they rely on (assumptions part D)
Comments only, no behaviour changed. modernc.org/sqlite v1.60.1 (the _pragma list on every connection, busy_timeout first; extended result codes; a deferred BEGIN; multi-statement Exec) and SQLite 3.53.4's documentation (transactions, WAL, foreign keys, NOCASE, upsert, julianday, partial indexes); htmx 2.0.4 src/htmx.js; the Fetch and HTML standards for Sec-Fetch-Site, Origin, SameSite, __Host-, CSP and defer order; Go's html/template. Comments the source contradicts are corrected - the driver does not serialise writes (SetMaxOpenConns(1) does), htmx:load fires per swapped element, no-store does not keep a page out of history. Left for their own commits: D-S3 a migration two processes can both run, D-S20 recipient case, D-B3 Origin: null under Referrer-Policy: no-referrer, D-H5/H6/H7/H9 (audit M11, stage 4). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
a618ffb0e4 |
send log: rows belong to a domain by id (audit L12, 0008)
A domain user's log, the message page, a domain's statistics, the level-2 count and the notifier's refusal count picked send-log rows by domain name, so a domain deleted and re-added under its old name showed its earlier mail to the next assignee and went on counting it. Migration 0008 (not run on the live database yet, so extended here): send_log.domain_id and inbound_spam_log.inbound_domain_id, REFERENCES ... ON DELETE SET NULL, filled once by name from the registry as it is at migration time, each with an (id, created_at) index. - Writes: InsertQueued / InsertRejected set domain_id to the domain of the row's login (loginDomainID) - the journal milter and the sender check's refusal rows both go through them; the inbound journal sets inbound_domain_id from the inbound domain's name at insert. - Reads: SendLogFilter.DomainIDs (was Domains, by name) and InboundSpamFilter.DomainIDs are the scope; the global role still reads everything. The message page checks row.DomainID against the user's domains. DomainSendStats and CountMessages keep their name argument and select domain_id = (SELECT id FROM domains WHERE name = ?). The notifier joins send_log.domain_id to the domain and its application. - DMARC reports stay by name on purpose (a report is about the DNS name). Tests: store - scope by ids; a re-added domain's log, level-2 count and statistics hold its own row only, the global log both; inbound scope by ids. Handlers - the new assignee gets 404 for the old row's page and does not see it in the log, the global role sees both. Tests that wrote rows for a login that is no application now register it (a row is a domain's through its application). Schema at 0008 with the two columns and indexes. schema-migrations row 8, CHANGELOG [Unreleased], audit plan line ticked, roadmap 19/62. Evidence: go vet ./... clean; go test ./... ok locally but for the two Windows-only tests; the server run follows before the push. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
89774ab847 |
inbound-antispam-panel: three things the reviews left as found
test / test (push) Canceled after 0s
The owner asked for them to be put right (2026-10-12).
- A refusal is not logged twice after an unclean stop. The tailer
saves its place every five seconds, so on start it reads some
lines again; for the lines it reads on start a row is written only
if the same row is not there already (store.InsertInboundSpamOnce:
same moment, client, sender, recipient, decision, engine, detail).
Lines read as they are written are always new, so two identical
refusals in one second stay two rows.
- The Inbound log offers Deny / Allow sender only for a sender the
lists would take (inbound.Listable): an envelope sender may be
spelt in ways the form refuses, and the link led to a refusal.
- A network of one address is stored as the address: 192.0.2.7/32
and 192.0.2.7 were two entries of one list.
Checked on the test server, uncommitted tree: go vet ./... ok,
go test ./... ok (22 packages), make e2e ok.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
c731a98a0f |
inbound-antispam-panel: findings of the technical and security reviews
test / test (push) Canceled after 0s
Steps 11 and 12 of docs/plans/inbound-antispam-panel.md: 12/12. Two
read-only reviews of d65d632..HEAD by different models (Opus,
technical; Fable, security), each given the code and questions, not
conclusions. Nothing Critical or High in the feature; the High the
technical review found outside it is the commit before this one.
Log tailer (internal/logtail/inbound.go):
- the reply of a refusal ends at the first "; from=<", Postfix's own,
and the HELO name after it is whatever is left. Taking the longest
reply let a HELO name that spelt "; from=<..> to=<..> proto=.."
supply the row's sender, recipient and reply - and so make a
refusal read as the deny list's;
- an address with a quote, a bracket or a space is not kept: a quoted
sender could otherwise supply the recipient;
- the journal is cut to its row cap every 500 rows written, not only
every six hours;
- a queue id is forgotten when the message is queued or the id is
opened by another listener, and a stale place in the queue of
arrivals no longer drops a live id;
- milter-hold lines are not read: the held message reaches the
journal milter, which writes its row - it was written twice.
Lists (internal/inbound/lists.go): a change of the table and the
rewrite of the files are one step under a mutex; a failed rewrite puts
a removed entry back and rewrites after taking a new one out.
Store: the row cap removes the oldest by time, as the page orders them.
Page: on a sheet a refusal's text is a Reply whatever it starts with.
Help and the guide say that an allow entry for a sender address trusts
an address anyone can claim (design commit before this one).
docs/security.md: the two reviews; the roles table gains Inbound > Log
and Filter lists; Mail path describes the milters, the tailer and the
lists; four accepted risks - the filter's verdict while it is down, an
allow entry by sender address, the list files' mode, log rows held by
domain name. The plan's stale lines (size and rate refusals, who reads
the journal) are corrected.
Left as found, told to the owner: the journal's rows after an unclean
stop may be written twice (the tailer saves its place every five
seconds); a "Deny sender" link is offered for an address the form then
refuses; 1.2.3.4 and 1.2.3.4/32 are two entries.
Checked on the test server, uncommitted tree: go vet ./... ok,
go test ./... ok (22 packages), make e2e ok.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
7192c3861e |
inbound-antispam-panel: Filter lists, kind column, matches, note on a sheet
Follows the design commit before it (owner's words quoted there). The lists' tables are Value, Kind, Matched and Remove. The kind tag opens the entry's sheet: note, day added, how often it decided a message in the days the log keeps, and the last match. Matches are read off the journal on each view, nothing is stored (inbound.Lists.Usage, store.ListSpamListHits). A row counts for an entry when the list decided the message - a rejected row whose reply is the deny rule's message, an accepted row whose verdict carries the allow rule's symbol for that kind - and the entry fits the row's sender or client address the way rspamd matches it: an address whole, a domain as the sender's domain, a network containing the client (an IPv4-mapped address as IPv4). A failure to count shows the lists with "never" and logs why. For that the journal milter keeps the lists' own symbols ahead of its six-symbol cap: rspamd writes symbols heaviest first, so an allow entry's -100 came last and was cut behind any six others. The plan gains "Filter list usage": what counting from the journal implies, and - the owner asked for it in writing - the conditions under which a counter kept with each entry becomes worth a migration (the journal cut by its row cap and not by age; a short retention; counts that must outlive the journal; a slow page). multimap.conf says which of its texts SelfPost reads back. Tests: Usage over every kind on both lists and the rows that are nobody's; the milter's symbol order; the store query; the page and its sheets; a handler test from journal rows to the numbers on the page. Seen: the fixture page with a sheet open, headless Edge at 1360 px - the same as the accepted drawing. Checked on the test server, uncommitted tree: go vet ./... ok, go test ./... ok (22 packages), make e2e ok. Not seen in a real run: a count above zero. It needs an entry added in the panel, which I cannot sign in to, and then mail that the list decides; in particular the deny rule's message arriving in mail.log as the reply of a milter-reject line is what the trial with rspamc showed, not yet what Postfix logged. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
56c5dfee40 |
inbound-antispam-panel: Inbound > Log and Inbound > Filter lists
Step 6/12 of docs/plans/inbound-antispam-panel.md. Written by a Sonnet
subagent from the mockups, reviewed and corrected by me.
GET /inbound/log - the journal a page at a time (50), filtered by
domain, decision and day; QueryInboundSpam / CountInboundSpam with the
viewer's inbound domains as the scope. The global role reads all of it
and gets "Deny sender" / "Allow sender" links into the lists; a user
with the domain role reads the rows of the inbound domains assigned to
them, without the links. The plan said global-only for the journal;
the accepted mockup and 2.0's delegation of Inbound say otherwise -
recorded in the plan as built.
GET, POST /inbound/filter-lists and POST .../{id}/delete - global role,
404 otherwise. Add form (prefilled from the query), the two lists with
Remove as the kit's row action, and "Where the lists go" with the
filter's state and when the maps were last written
(Lists.LastWritten). A refused or duplicate entry is 422 with the
message and what was typed.
Server > Settings: "Keep inbound log rows, days" with the relay on.
Help: Inbound log, Filter lists. Navigation: Log for everyone who sees
Inbound, Filter lists for the global role (Shell.ShowFilterLists).
Status tags accept / reject / tempfail join the kit's mapping.
Tests: page fixtures for both screens, held to outlines.json; view and
handler tests (both roles, filters, paging, relay off, add / duplicate
/ invalid / delete, map file content, settings field, help). e2e reads
the journal from the page instead of the database and adds and removes
a deny entry through the panel, reading deny_domain.map after each.
Seen: both pages and Settings rendered from their fixtures and compared
with the mockups side by side (headless Edge, 1360 px) - same layout
and wording.
Checked on the test server, uncommitted tree: go vet ./... ok,
go test ./... ok (22 packages), make e2e ok.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
eea40bcd49 |
inbound-antispam-panel: filter lists, written as rspamd maps
Step 5/12 of docs/plans/inbound-antispam-panel.md.
Store: AddSpamListEntry, ListSpamListEntries, DeleteSpamListEntry.
internal/inbound/lists.go validates and normalises an entry - sender
address, sender domain, client address or network (canonical text, an
IPv4-mapped address as IPv4, /0 refused) - and writes the lists as six
map files under /data/antispam (ANTISPAM_DIR), each atomically, 0644 in
a 0755 directory: the filter is another user in another container. All
six are written on every change and on every start with the relay on,
empty ones included. An entry whose maps could not be written is taken
back out of the table. The writer refuses a stored value with
whitespace, a newline or # in it.
The plan's allow.map / deny.map became one file per list and entry
type: to rspamd an IP map and a sender map are different map types.
deploy/antispam/rspamd/multimap.conf holds the rules; the fragment
mounts it and ./data/antispam into the sidecar. Deny is a prefilter
reject, allow a symbol weighing -100. Tried in a throwaway rspamd 3.11
container on the test server:
- with allow as a prefilter accept, an address on both lists was
accepted and an IP on both was refused - the rule that ran first
decided; with the weight, deny won in all five mixed cases;
- IPv4, IPv6, address (any case), domain (not its subdomains) match;
- a rewritten file is reread in about ten seconds, no restart;
- files that appear after rspamd started are loaded the same way.
No page edits the lists yet (step 6).
Checked on the test server, uncommitted tree: go vet ./... ok,
go test ./... ok (22 packages), make e2e ok - with the relay on
/data/antispam is 755 and holds the six maps, 644, empty.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
27fd355e53 |
inbound-antispam-panel: refused inbound mail from mail.log; retention
Step 4/12 of docs/plans/inbound-antispam-panel.md. The log tailer writes an inbound_spam_log row for mail port 25 refused (internal/logtail/inbound.go): a "reject:" line of the port-25 smtpd is Postfix's own policy; a milter-reject / milter-hold / milter-discard line of cleanup is the filter's verdict. Only a recipient at an inbound domain is a row, so "Relay access denied" for a stranger's domain is not. The row is dated by its log line; the reply text is cut to 255 bytes of printable ASCII; a reply starting with 4 is a tempfail. To tell port 25 from 465 / 587 the listener now logs as postfix/inbound (syslog_name). cleanup logs under one name for every listener, so its verdict counts only for a queue id the port-25 smtpd was seen to open (4096 remembered). Lines are matched from the head, after timestamp and host: their tail is the sender's own text. Retention: PruneInboundSpam every six hours - older than the inbound_spam_log_retention_days setting (seeded from INBOUND_SPAM_LOG_RETENTION_DAYS, 90, range 7-365), then down to 10 000 rows. The setting has no field in the panel yet. Known limits, in architecture.md: a log line names one recipient, so a message refused at end-of-message is one row; a line re-read after an unclean stop would be a second row. Checked on the test server, uncommitted tree: go vet ./... ok, go test ./... ok (22 packages), make e2e ok - the unknown recipient at the inbound domain refused on port 25 has its row (reject by postfix), the stranger's domain has none. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
28ec784ae2 |
inbound-antispam-panel: inbound journal milter on port 25
Step 3/12 of docs/plans/inbound-antispam-panel.md. The panel serves a second milter while the inbound relay is on (internal/milter/inbound.go, socket INBOUND_JOURNAL_MILTER_SOCKET, default /run/selfpost/inbound-journal.sock). build/postfix-config.sh puts it last on port 25, after the optional antispam milter, with default_action=accept; postfix-wrapper.sh waits for its socket. At end-of-message it writes one inbound_spam_log row per recipient at an inbound domain - other port-25 recipients (DMARC report addresses) get none - and always accepts. With a filter attached it reads the verdict from X-Rspamd-Action and X-Spamd-Result (action, score, up to six weighted symbols, only what the patterns recognise, 255 bytes); without one those headers are the sender's and are not read. The plan named X-Rspamd-Score, which rspamd does not have. The antispam compose fragment mounts rspamd/milter_headers.conf into the sidecar so that it adds the two headers (checked in rspamd 3.11: both routines exist and remove a sender's own headers of those names). Store: InsertInboundSpam, IsInboundDomain. Checked on the test server, uncommitted tree: go vet ./... ok, go test ./... ok (22 packages), make e2e ok - the relayed message of inbound_relay_delivers_and_refuses has its journal row (accept by selfpost) and the DMARC report sent through the same listener has none. Not yet seen in a real run: a verdict written by rspamd reaching this milter. The e2e stand has no filter, and the test server's only inbound domain has no upstream, so it accepts no mail. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |