- The e2e's numeric-settings test ran a container that passed every gate
and never ended: the good values are checked beside a bad one after
them; each run is named, bounded to a minute and removed.
- The gates refuse a value under the parameter's minimum (a zero window
kills anvil, a zero milter timeout smtpd) and one past an int, in
seconds for a time value (src/global/conv_time.c, src/anvil/anvil.c).
- OpenDKIM waits, five seconds at most, for the relay's socket.
- The relay marks its lines `syslog: `, writes control characters out,
reads into a queue at once and drops past 200 lines a second, saying
how many (security F1, F2; a stuck relay would hold OpenDKIM in
syslog(3)).
- smtp_tls_mandatory_protocols >=TLSv1.2 too.
- extract-cert.sh keeps the old files' group and sets its trap before
mktemp.
- crashexit spares cert-reload; architecture.md "four times running" and
what else exits the container; security.md the restart after five panel
exits and the /dev/log socket.
- Measured against the technical review: smtpd has the selfpost group
(Groups 104 998), so it did reach the supervisor socket before this
stage.
Accepted, reasons in the plan: the logrotate state file in the postfix
user's directory, envdoc_test's reading of `${VAR:-}` only, crashexit's
window pruning untested.
Tested on the test server: go vet + go test of 27 packages, make e2e (all
pass, 592 s) on this tree.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Comments only, no behaviour changed. Each main.cf/master.cf parameter the
build sets, the wrapper's and the reload hook's reliance on Postfix 3.7.11
(postfix-script, master.5, postconf.5, cleanup_init.c, smtpd_peer.c,
README_FILES), supervisor 4.2.5 (process.py, options.py, events.rst),
logrotate 3.21.0, OpenDKIM's config, Cyrus SASL's sasldb, rspamd 3.11.1
(milter_headers.lua, multimap, the map watcher), Docker Compose, CoreDNS
and certbot now say where that is written. Measurements already there stay
measurements ("date not recorded" where none was); hand-composed fixtures
say so.
Contradictions left for their own commits: C-P31 cleanup's size limit,
C-P42 master outside supervisor's signal, C-V5/V6 startsecs, C-V10,
C-S3/Q3 sasldb written in place, C-Q4/A1 certbot's symlinks, C-R7 rspamd
skips local clients but the signature routine does not, C-P8, C-R4, C-R12,
C-M7, C-E2, C-K8/K9, C-D1.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Review pass over `1.4.0`…`1.9.1`: port 25 no longer shares the submission milter chain, DMARC reports are validated before they are stored, and the auto rate limit is correct for a non-default level-1 window. Schema migration `0010` (index only). Upgrading is a tag bump.
Added:
- SQLite migration `0010_send_log_app_login_index.sql` —
- DMARC aggregate reports are accepted as **zip** as well as gzip or plain XML
- e2e: `checkPort25ConfigCombinations` regenerates the Postfix configuration
Changed:
- README hero line and a **Positioning** block in `docs/product.md` record the
Fixed:
- The setup account's password is hashed at bcrypt cost `12` like every other
- Login/setup rate limiter: protecting blocked buckets from eviction is now
- `postqueue -p` output is bounded to 4 MiB (the timeout alone left the size of
- [schema-migrations.md](docs/schema-migrations.md): the schema section was
- postqueue reader is now time-bounded: `postqueue -p` runs under a 5-second
… (11 more in CHANGELOG)
Changed:
- [roadmap.md](docs/roadmap.md) now carries everything the 2026-08-19 code
- Extracted `internal/configsafe` — the empty-value and forbidden-character
- Build, deploy and migration comments no longer cite the archived
- Dropped the `parseDomainRateLimitForm` / `parseAppRateLimitForm` pass-through
- Extracted shared helpers: `internal/atomicfile` (atomic temp-write+rename) and
… (7 more in CHANGELOG)
Removed:
- Unused legacy asset `docs/assets/icon.png` (superseded by the four brand SVGs
- Plan documents for already-shipped features: `domain-stats-auto-ratelimit`,
Full detail: CHANGELOG.md (1.9.2).
[1.0.0]
Added:
- A **Delivery log** on each delivery's page (`/deliveries/{id}`): the
- A **History** block on the same page: the journal's two timestamps stated as
Fixed:
- Postfix config: copy TLS cert/key from the (often `:ro`, host-owned) mount
- Postfix config: allow `maillog_file` under `/data` via
- E2e: read `/data/setup-token` via `docker compose exec` (file is `0600`
- Entrypoint: check `SELFPOST_HOSTNAME` before `/data` setup (so a bad identity
- E2e gate: wait for host-published `/healthz` before panel setup, and stop
… (3 more in CHANGELOG)
Changed:
- Document what `.spbk` and `.spde` stand for (SelfPost backup / SelfPost domain
- Docs aligned with the code: setup URL is `/setup/<token>` (README and
- Full backups no longer carry `/data/log`. It is Postfix's raw log plus its
- Monitoring screens (status, mail queue, system log, deliveries) use adaptive
- Documentation package consolidated into `docs/development.md`: Documentation
… (4 more in CHANGELOG)
[1.0.1]
A documentation and packaging release: no change to the mail path, the database, or the on-disk layout. Upgrading is a tag bump.
Added:
- `SECURITY.md` — how to report a vulnerability privately (GitHub private
- [docs/plans/](docs/plans/) — one document per agreed extension: the optional
Changed:
- The panel's **Account** entry is now called **Settings** — nav link, page
- The signed-in name in the panel's nav is now labelled `User:`, so it reads as
- [docs/product.md](docs/product.md) reframes the future line: the inbound
- [docs/security.md](docs/security.md) is now in English, matching the rest of
- The README documentation table now points at `SECURITY.md` for reporting a
… (2 more in CHANGELOG)
Fixed:
- The panel's static assets are served with a content ETag and
Squashed CHANGELOG sections: [1.0.0], [1.0.1].
Full detail: CHANGELOG.md (1.0.0, 1.0.1).
Initial feature-complete implementation of the v1.0 specification (phases 0-11 of `docs/implementation-plan.md`).
Added:
- Panel (Go, single static binary) with SQLite persistence, one-time
- Domain management with per-domain DKIM (RSA-2048, generated in pure Go) and
- Application (sender identity) management: SASL credentials via `sasldb2`,
- Full Postfix relay config generated from env at container start: SMTPS 465,
- Journal milter (pure Go, `go-milter`) recording every send to `send_log`;
… (6 more in CHANGELOG)
Full detail: CHANGELOG.md (0.1.0).
mixandClaude Opus 5.5