Cyrus SASL 2.1.28 opens sasldb2 with no Berkeley DB environment, so with
no locks (sasldb/db_berkeley.c, berkeleydb_open(): db_create(mbdb, NULL,
0)); saslpasswd2 puts and deletes in the file itself (_sasldb_putdata()),
while smtpd opens and closes it at every AUTH (_sasldb_getdata()) and the
backup copies it whenever it runs. Either could read a half-written page:
a spurious 535, or a torn sasldb2 in a backup whose restore breaks every
application's AUTH (assumptions C-S3, C-Q3).
SASLDB.Set and Delete now run saslpasswd2 on sasldb2.new - a byte copy of
the database, or no file when there is none yet (saslpasswd2 creates it,
DB_CREATE) - then chmod 0640, fsync, rename over sasldb2; a failed run
removes the copy and leaves the database; a copy a killed panel left is
removed first. A mutex keeps two changes of the panel from copying the
same old file. The backup needs no lock after all (the plan said one): it
reads each file through one descriptor, and a rename leaves that file
whole; the walk now leaves out a file that vanished between listing and
open (a writer's temporary file), while the SQLite snapshot's absence
stays an error. CHANGELOG also gains the entries of f2ad699 (supervision),
written then without them.
Tests: the copy holds the database's bytes, saslpasswd2 never gets the
live path, a reader of the old file keeps reading it (Linux), mode 0640,
nothing left behind; a failed change leaves the database; the first
account creates it. Stand (2026-10-15, make e2e, exit 0): new
sasldb_changed_by_rename - the inode of sasldb2 changes across one
password change (it cannot be the old one's: both exist at the copy),
then 35 AUTHs of app1 from three clients during 104 password changes of
another application, none refused; afterwards 640 panel selfpost, no copy
left in /data/sasl, the last password authenticates. That cannot prove a
race absent; it guards the mechanism. (A first run compared the inode
after 15 changes and found it equal: Linux reuses a freed inode number.)
go vet and go test ./... pass on the server (24 packages).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Comments only, no behaviour changed. go-milter v0.4.1 (session.go: one
session per connection, replaced after a non-continue reply; macros per
stage), Postfix 3.7.11 (milter8.c, smtpd_check.c
reject_auth_sender_login_mismatch(), mail_addr_find.c, showq_compat.c,
mail_conf_time.c, mail_params.h), Cyrus SASL 2.1.28 (saslpasswd.c,
plugins/sasldb.c: deleting a missing login is not an error), OpenDKIM
2.11.0~beta2 (opendkim-db.c, opendkim-genkey), Berkeley DB 5.3 db_dump,
rspamd 3.11.0. Comments that claimed what the source denies are corrected
(sasldb keeps the password as given, not hashed; an embedded newline is
kept, not truncated; rspamd sorts symbols by absolute weight); fixtures say
seen or composed. The sender check's From: parsing gets no citations: it is
replaced by the port of OpenDKIM's dkim_mail_parse next.
Contradictions left for their own commits: B-G5 cleanAddress, B-PS1 first
key wins, B-PQ1 the forced-expire flag, B-PQ10/PQ11 Postfix's time units.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Stage 1, step 4 (plan § Routes).
Service (internal/app)
- Settings{Mode, Addresses, AuthIPRestrict, AuthAllowedIPs, Limit} is what
the form holds besides the login. CreateWithSettings creates the
application with all of it and removes it again if a later write fails;
SaveSettings validates the sender rule first and, if a later write
fails, puts back what it had already changed. The form produces a whole
application or leaves things as they were.
- Limit.Mode "" is "use the domain limit"; auto takes its ceiling from a
recalculation the caller supplies.
Routes and handlers
- GET, POST /outbound/domains/{id}/applications/new
GET, POST /outbound/domains/{id}/applications/{aid}
POST .../{aid}/password, .../{aid}/ratelimit/recalc, .../{aid}/delete
replace POST /domains/{id}/applications and the six /applications/{aid}/*
routes. lookupDomainApplication answers 404 when the application is not
in the domain named by the path - also when the caller may open that
domain.
- A generated password is the response to its POST only (no GET path) and
is sent with Cache-Control: no-store.
- The login is not renamed by the form; a changed login is a 400.
Old domain page: the three per-application forms (mode, IP restriction,
limit) are one form with one Save; "Remove limit" became the "Use the domain
limit" choice. The e2e client follows (edited, not run here).
Tests: service - create and save in every limit mode, and all-or-nothing on
a refused sender rule, a failed recalculation and a failed sender-map
rebuild; handlers - the form's parsing, one POST creating sender + IPs +
limit, four kinds of refused form creating nothing, save, the no-store
header on both password pages, and five application routes against another
tenant's application addressed through its own domain and through the
caller's.
With @routes removed by hand TestRoutesFollowNavigation now reports only
GET /server/health (step 5).
go test ./... green except the two Windows-only failures in internal/domain
and internal/logtail.
Roadmap 14/27.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
[1.0.0]
Added:
- A **Delivery log** on each delivery's page (`/deliveries/{id}`): the
- A **History** block on the same page: the journal's two timestamps stated as
Fixed:
- Postfix config: copy TLS cert/key from the (often `:ro`, host-owned) mount
- Postfix config: allow `maillog_file` under `/data` via
- E2e: read `/data/setup-token` via `docker compose exec` (file is `0600`
- Entrypoint: check `SELFPOST_HOSTNAME` before `/data` setup (so a bad identity
- E2e gate: wait for host-published `/healthz` before panel setup, and stop
… (3 more in CHANGELOG)
Changed:
- Document what `.spbk` and `.spde` stand for (SelfPost backup / SelfPost domain
- Docs aligned with the code: setup URL is `/setup/<token>` (README and
- Full backups no longer carry `/data/log`. It is Postfix's raw log plus its
- Monitoring screens (status, mail queue, system log, deliveries) use adaptive
- Documentation package consolidated into `docs/development.md`: Documentation
… (4 more in CHANGELOG)
[1.0.1]
A documentation and packaging release: no change to the mail path, the database, or the on-disk layout. Upgrading is a tag bump.
Added:
- `SECURITY.md` — how to report a vulnerability privately (GitHub private
- [docs/plans/](docs/plans/) — one document per agreed extension: the optional
Changed:
- The panel's **Account** entry is now called **Settings** — nav link, page
- The signed-in name in the panel's nav is now labelled `User:`, so it reads as
- [docs/product.md](docs/product.md) reframes the future line: the inbound
- [docs/security.md](docs/security.md) is now in English, matching the rest of
- The README documentation table now points at `SECURITY.md` for reporting a
… (2 more in CHANGELOG)
Fixed:
- The panel's static assets are served with a content ETag and
Squashed CHANGELOG sections: [1.0.0], [1.0.1].
Full detail: CHANGELOG.md (1.0.0, 1.0.1).
A bounce could be recorded as a successful delivery. The log-tailer's
Fixed:
- A bounce could be recorded as a successful delivery. The log-tailer's
- Log-tailer resumes where it stopped instead of jumping to end-of-file on
- Level-2 rate limit no longer overshoots under concurrency: messages that
Changed:
- The project has a single public home: `github.com/mixeme/selfpost`. Codeberg
- Code comments no longer cite the archived specification. References like
- `docs/code-review.md` is gone. Its plan is finished — phases 0 (bar the
- `docs/architecture.md` gained a *Code layers* section: a diagram of
- Phase 1 doc/code hygiene (`docs/code-review.md`): removed ~30 stale
… (1 more in CHANGELOG)
Security:
- Pre-release security review (plan § D, model Fable, 2026-08-06): full pass
- `saslpasswd2` argv: the application login is now passed after a `--`
Added:
- Optional password encryption for the two secret-bearing downloads (plan
- Domain import accepts an encrypted export: the envelope is detected by its
- `selfpost-backup` writes encrypted archives and reads them back:
- `TestParseDelivery` covers the exotic mail.log shapes the review asked for
- docs: README *Encrypting a backup or export*; `docs/security.md` §
… (14 more in CHANGELOG)
Removed:
- docs: `security.md` — accepted risk «restore old backup revives session rows»
Changed:
- docs: `implementation-plan.md` trimmed to the sole open v1.x gate — pre-release
- docs: `architecture.md` — sessions (SQLite, idle renew, password change),
- docs: `development.md` — expanded e2e stack and `release.yml` matrix workflow.
- docs: `security.md` — accepted risk for send-log rows stuck at `queued` after
- docs: `roadmap.md` — optional send-log / `mail.log` follow-ups under v1.x tail.
… (10 more in CHANGELOG)
Full detail: CHANGELOG.md (0.5.0).
Initial feature-complete implementation of the v1.0 specification (phases 0-11 of `docs/implementation-plan.md`).
Added:
- Panel (Go, single static binary) with SQLite persistence, one-time
- Domain management with per-domain DKIM (RSA-2048, generated in pure Go) and
- Application (sender identity) management: SASL credentials via `sasldb2`,
- Full Postfix relay config generated from env at container start: SMTPS 465,
- Journal milter (pure Go, `go-milter`) recording every send to `send_log`;
… (6 more in CHANGELOG)
Full detail: CHANGELOG.md (0.1.0).
mixandClaude Opus 5.5