Step 4/12 of docs/plans/inbound-antispam-panel.md.
The log tailer writes an inbound_spam_log row for mail port 25 refused
(internal/logtail/inbound.go): a "reject:" line of the port-25 smtpd is
Postfix's own policy; a milter-reject / milter-hold / milter-discard
line of cleanup is the filter's verdict. Only a recipient at an inbound
domain is a row, so "Relay access denied" for a stranger's domain is
not. The row is dated by its log line; the reply text is cut to 255
bytes of printable ASCII; a reply starting with 4 is a tempfail.
To tell port 25 from 465 / 587 the listener now logs as
postfix/inbound (syslog_name). cleanup logs under one name for every
listener, so its verdict counts only for a queue id the port-25 smtpd
was seen to open (4096 remembered). Lines are matched from the head,
after timestamp and host: their tail is the sender's own text.
Retention: PruneInboundSpam every six hours - older than the
inbound_spam_log_retention_days setting (seeded from
INBOUND_SPAM_LOG_RETENTION_DAYS, 90, range 7-365), then down to 10 000
rows. The setting has no field in the panel yet.
Known limits, in architecture.md: a log line names one recipient, so a
message refused at end-of-message is one row; a line re-read after an
unclean stop would be a second row.
Checked on the test server, uncommitted tree: go vet ./... ok,
go test ./... ok (22 packages), make e2e ok - the unknown recipient at
the inbound domain refused on port 25 has its row (reject by postfix),
the stranger's domain has none.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Step 3/12 of docs/plans/inbound-antispam-panel.md.
The panel serves a second milter while the inbound relay is on
(internal/milter/inbound.go, socket INBOUND_JOURNAL_MILTER_SOCKET,
default /run/selfpost/inbound-journal.sock). build/postfix-config.sh
puts it last on port 25, after the optional antispam milter, with
default_action=accept; postfix-wrapper.sh waits for its socket. At
end-of-message it writes one inbound_spam_log row per recipient at an
inbound domain - other port-25 recipients (DMARC report addresses) get
none - and always accepts. With a filter attached it reads the verdict
from X-Rspamd-Action and X-Spamd-Result (action, score, up to six
weighted symbols, only what the patterns recognise, 255 bytes); without
one those headers are the sender's and are not read. The plan named
X-Rspamd-Score, which rspamd does not have.
The antispam compose fragment mounts rspamd/milter_headers.conf into
the sidecar so that it adds the two headers (checked in rspamd 3.11:
both routines exist and remove a sender's own headers of those names).
Store: InsertInboundSpam, IsInboundDomain.
Checked on the test server, uncommitted tree: go vet ./... ok,
go test ./... ok (22 packages), make e2e ok - the relayed message of
inbound_relay_delivers_and_refuses has its journal row (accept by
selfpost) and the DMARC report sent through the same listener has none.
Not yet seen in a real run: a verdict written by rspamd reaching this
milter. The e2e stand has no filter, and the test server's only inbound
domain has no upstream, so it accepts no mail.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Security review of the DMARC report path (Fable, 2026-10-11), which ran
for the first time in 2.0.0. No Critical or High finding. Fixed:
- Medium: a report was bounded only as 8 MiB of XML - some 160 000
records or one name of megabytes, all of it rows and table cells. At
most 5 000 records (more is ErrRejected, dropped), text fields cut to
255 bytes on a character boundary, a record's count capped.
- Medium: the cap of 500 reports was for the whole server, so a stranger
filing under one domain's address evicted every other domain's
reports. PruneDMARCReports counts per domain.
- Low: the pipe service ran up to default_process_limit (100) commands
at once against the panel's database; maxproc is 1.
- Low: the reason logged for a dropped message carried the sender's
bytes (header line, zip entry name) as they came; cut to 200 bytes and
reduced to printable ASCII, zip entry names quoted.
- Low: SELFPOST_DATA_DIR / SELFPOST_DB_PATH with whitespace or "$" would
reach the command through export_environment as another path; refused
at start when DMARC ingest is on.
Left as they are, told to the owner: the parse-failure count is a
lifetime figure shown under "This week"; a report larger than the
command reads is dropped as unreadable; nested multipart is not searched.
The hub's Retention line follows the design commit before this one.
security.md: the review, and the accepted-risk entry says what a
stranger can and cannot do now. The roadmap no longer calls the review
pending.
go vet ./cmd/... ./internal/dmarc/ ./internal/store/: ok
go test ./cmd/... ./internal/dmarc/ ./internal/store/ ./internal/web/...: ok
make e2e on the test server (with the port-25 scenarios of the next
commit): ok
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The first DMARC report to reach the test server (Google, 2026-10-11
09:41 UTC) was accepted on port 25 and then sat in the queue:
postfix/pipe: fatal: missing user= command-line attribute
postfix/qmgr: warning: private/dmarc-ingest socket: malformed response
Three things stood between an accepted report and the panel, all since
the feature shipped in 1.7.0 - no report had ever been delivered:
- The service was addressed as dmarc-ingest/unix-pipe. Its type is unix:
postconf -P answered "unmatched service_name/type" for flags=, user=
and argv= (the warnings in the container log at every start), which
are arguments of pipe(8) anyway and not -o parameters, and the service
stayed a bare "pipe". For the same reason postconf -MX never removed
it. It is dmarc-ingest/unix now, with the arguments in the service line.
- pipe(8) gives the command export_environment and nothing else, so the
command would have refused to run: it reads DMARC_REPORTS_ENABLE (and
the data directory, when it is not the default) from the environment.
Those are now named in export_environment.
- The command took the recipient from RECIPIENT, which local(8) sets and
pipe(8) does not. With no recipient the check that a report came to the
address of its own domain is skipped. It is now ${recipient} in argv,
one recipient per run.
When DMARC ingest is off the service and both parameters are removed.
e2e: every port-25 combination now asks Postfix for the service and the
two parameters (postconf -M / -h), and for their absence when ingest is
off - which is how the wrong type was found. make e2e on the test
server: ok. go test ./cmd/panel/ ./internal/dmarc/ ./internal/postfix/:
ok.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Found by talking SMTP to port 25 of the test server once it answered
again (2026-10-10): RCPT TO:<dmarc-reports+bs.mixdep.ru@selfpost.mixfed.ru>
was refused with "550 5.1.1 User unknown in relay recipient table".
With INBOUND_RELAY_ENABLE and DMARC_REPORTS_ENABLE both true the server's
own name is a relay domain (for the reports) and relay_recipient_maps
lists the relay's recipients only. smtpd_reject_unlisted_recipient
applies after the restriction list, so the OK that
check_recipient_access gives a report address does not help: every
report was refused. The table of report addresses is added to
relay_recipient_maps in that combination.
Checked on the server by setting the parameter in the running container
and reloading Postfix: the domain's report address is answered 250, the
former server-wide mailbox and an unknown local part 550, a foreign
domain and an inbound domain without recipients 554. e2e: the combined
case requires relay_recipient_maps to name both tables.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Seen in the System log of the test server (2026-10-10): on every
connection to port 25
postfix/smtpd: fatal: unexpected command-line argument:
texthash:/data/postfix/dmarc_recipients,reject_unauth_destination,...
postfix/master: warning: .../smtpd: bad command startup -- throttling
With DMARC_REPORTS_ENABLE=true the script wrote
-o smtpd_recipient_restrictions=check_recipient_access texthash:...,...
into master.cf. Master splits a service line on whitespace, so smtpd got
the option cut at the space plus a stray argument and died at start:
port 25 greeted nobody - no inbound relay, no DMARC reports. postconf -P
smtp/inet/smtpd_recipient_restrictions showed the cut value,
"check_recipient_access". The server's logs have it under the previous
image too (2026-10-09), so it is not from the redesign; postfix check
does not notice, and the e2e check compared the text of master.cf with
an expectation that had the space in it.
- The restriction list is written with commas only (Postfix splits it
on commas as well as whitespace).
- master_cf_set_smtp_inet_o stops the container on a value with
whitespace instead of writing it.
- e2e: for every option it checks, the port-25 case also asks
postconf -P and requires Postfix to read the same value.
Not fixed here: Postfix's start-time warnings "not owned by root" for
the queue directory and its pid/ - the entrypoint's recursive chown
again; harmless, logged at every start.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Review pass over `1.4.0`…`1.9.1`: port 25 no longer shares the submission milter chain, DMARC reports are validated before they are stored, and the auto rate limit is correct for a non-default level-1 window. Schema migration `0010` (index only). Upgrading is a tag bump.
Added:
- SQLite migration `0010_send_log_app_login_index.sql` —
- DMARC aggregate reports are accepted as **zip** as well as gzip or plain XML
- e2e: `checkPort25ConfigCombinations` regenerates the Postfix configuration
Changed:
- README hero line and a **Positioning** block in `docs/product.md` record the
Fixed:
- The setup account's password is hashed at bcrypt cost `12` like every other
- Login/setup rate limiter: protecting blocked buckets from eviction is now
- `postqueue -p` output is bounded to 4 MiB (the timeout alone left the size of
- [schema-migrations.md](docs/schema-migrations.md): the schema section was
- postqueue reader is now time-bounded: `postqueue -p` runs under a 5-second
… (11 more in CHANGELOG)
Changed:
- [roadmap.md](docs/roadmap.md) now carries everything the 2026-08-19 code
- Extracted `internal/configsafe` — the empty-value and forbidden-character
- Build, deploy and migration comments no longer cite the archived
- Dropped the `parseDomainRateLimitForm` / `parseAppRateLimitForm` pass-through
- Extracted shared helpers: `internal/atomicfile` (atomic temp-write+rename) and
… (7 more in CHANGELOG)
Removed:
- Unused legacy asset `docs/assets/icon.png` (superseded by the four brand SVGs
- Plan documents for already-shipped features: `domain-stats-auto-ratelimit`,
Full detail: CHANGELOG.md (1.9.2).
mixandClaude Opus 5.5