Decided by the owner on 2026-10-13 (out of preflight), taken up on
2026-10-16; the sender is the owner's choice of 2026-10-16 ("Да, адрес
годится"): postmaster@ the hostname, as notifications. Server › Health
gets card 09, Test message: one recipient and Send. The message goes as
notifications go - through Postfix, signed with the key of the server's
own name - and opens in the Outbound log, whose page follows it to the
receiving server; ten an hour. The help gets a Test message topic: what
the test proves (the server's path, not a domain's) and what it does not
(the inbox). outlines.json: health gains the box, help one topic.
check.py: 0 violations.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The owner, 2026-10-16: "Может match ставить бэйджем в заголовок names?"
The certificate card loses its own "Matches the hostname" row: a tag
beside Names says it - "matches", or "not for the hostname" in red. A
fact's label may carry a tag (sp-facts dt .tag keeps the tag's own type),
shown on the kit page. Help says where the verdict is. check.py: 0
violations.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The owner, 2026-10-16, on the mockup: "Может Greeting на всю ширину
карточки?" The facts grid gets sp-wide, a fact over the whole row (shown
on the kit page), and the greeting uses it. The greeting itself is what
this image's Postfix writes: "220 mail.example.org ESMTP"
(build/postfix-config.sh sets smtpd_banner to "$myhostname ESMTP"),
not Debian's longer default. The Configuration card's address sits in a
block of its own above the text. check.py: 0 violations.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Decided by the owner on 2026-10-13 (in place of preflight), taken up on
2026-10-16 ("Делай все согласованные"). Three lines in Health's cards,
no new card: TLS certificate - "Matches the hostname"; Hostname and
reverse DNS - "Greeting", Postfix's 220 line; Configuration - "Your
address", the address the panel sees the browser at and where it took it
from. The help says when each fails and what to do. check.py: 0
violations; outlines unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The owner, 2026-10-16, of two ways for the navigation of a narrow screen
(pictures at 390 and 980 px): "Вариант 1. Но меню выглядит длинной
простынёй. Там бы сделать сворачивание разделов."
The cause, measured: the bar's menu was always open (navbar-menu
is-active, no burger), and Bulma lays it out below 1024 px as a sheet of
every section's pages, filling the first screen - on every phone, and on
a phone in "desktop site" mode (about 980 px) under columns that Bulma
puts side by side from 769 px; and a container has no side margin below
1024 px, so the page met the screen's edge.
Now, below 1024 px: the bar's menu is hidden (no is-active), and a Menu at
the right of the brand opens a panel over the page - Overview, then each
section as a fold, the current one open, the user's last (Account, Help,
Sign out). <details> all through: no script, like the folded DNS records.
The page and the strip of sibling pages get a 1rem gutter. From 1024 px
nothing changes. check.py: 0 violations; outlines unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Health: the opendkim process row goes; the Milter sockets card shows the
panel's signer on its two sockets, dkim-signer · applications (sign.sock)
and · notifications (sign-local.sock) - Q3 of the plan; Configuration
says it reloads Postfix. Domain delete: "stop signing mail as the
domain" for the OpenDKIM reload. System log: mail.log is Postfix's log
(OpenDKIM never wrote to it), its sample line goes. Message page: the
sample's OpenDKIM line becomes a qmgr line. Help, sender check: the
From: line is read as a mail program reads it and must be one address;
DMARC holds the signature to it; the sentence the mockup carried twice
is once. Overview: 5 of 5 sockets.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Since stage 4 the button also writes the spam filter's lists and the DMARC
maps (Postfix maps), and removes the keys of deleted domains; the box said
OpenDKIM and Postfix only (review of audit stage 4).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On a phone the stylesheet ordered a cards box by its place in its stack,
four to a stack; a fifth box got no rule and landed out of place with
nothing failing (owner, 2026-10-13). Each box of the layout carries its
number as data-order, and theme.css orders by it, up to twelve: an
attribute, since check.py refuses classes the pages do not use, and not a
style, which the CSP forbids. Health and the kit's cards carry it; the look
is the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Audit 2026-10-12, stage 2c, "Health says what is served" - the mockup
first.
TLS certificate (assumptions A-65): Postfix serves its own copy of the
mounted file, refreshed by cert-reload once a day by default, so the card
reads that copy. When the mounted file holds a renewal not taken up yet,
two facts name it (its expiry, when it was mounted) and the paragraph says
when Postfix takes it up; the help topic says the card warns once it has
waited longer than that check allows.
Wording (D-P1, D-P3): a message refused while the panel or the spam
filter does not answer is never queued, so it is not "deferred" in
Postfix's sense - the Sender check note, the sender-check and spam filter
help topics now say "refused with a temporary error". The upstream
topic's Required: mail waits in the queue while the upstream offers no
TLS or the handshake fails, and an upstream answering STARTTLS with a
permanent error bounces it (Postfix 3.7.11, src/smtp/smtp_proto.c;
smtp_trouble.c, smtp_bulk_fail()).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Owner, 2026-10-14 ("Может просто показывать и то, и то и не смешивать?"):
the figure that was "Messages deferred" is two - connections Postfix turned
away while the panel did not answer (refused from the connection on, before
a message is offered), and messages deferred in the middle, when the panel
stopped answering after a message had begun (cleanup's case, counted since
the M13 fix). The card has a column for each.
The audit's stage 2b also marks a day whose downtime is an estimate - a
start at which supervisord could not say since when Postfix ran: such a
period's time is shown with ≈, and the text under the table says it is at
most what is shown.
Help: topic sender-check says what each column counts and what ≈ means;
topic log names the bounced row the panel closed itself (the sweep, when
Postfix no longer held the message and mail.log never said what became of
it). build.py, check.py: 0 violations, outlines unchanged. The code follows
in the next commits; until then the help text guard fails - not pushed in
between.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Accepted by the owner on 2026-10-12 from screenshots, one change at a time.
- health: a card "Sender check" (today / 30 days / 12 months: panel not
answering, messages deferred) and a row for its socket.
- health: the boxes are numbered by importance and laid out as `cards` -
two stacks, odd numbers on the left and even on the right, each closed
up. His words on the row layout: too many holes; and on stacked columns
numbered down each side: the third box was below the fold while the
fourth was not. On a phone the boxes come in the order of their numbers.
- theme.css, components: the `cards` layout; the first pair of stacks of
the components page is laid out so.
- out-log: a row refused for its From: line, tagged "wrong From".
- help: topic "Sender check"; "rejected" in the Outbound log topic names
the three reasons.
outlines.json rewritten (check.py --write): the structure of health changed,
and help has one more topic under Outbound. check.py: 0 violations.
The pages of internal/web follow in their own commit; until then the
outline guard fails.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Accepted by the owner on 2026-10-12 from screenshots, after two changes of
his: DKIM for the server's own name as well as SPF ("we need the best
deliverability for these messages"), and the records themselves under
Settings with only their state on Health.
- account: a checkbox "Send me notifications" in the Profile box, under the
e-mail it writes to. No box of its own, no choice per event.
- settings: box 03 Notifications with the instance switch; box 04
Notification mail with the two DNS records of the server's own name, DKIM
and SPF, drawn with the record component of a domain's DNS page. Sending
rate limits move to the left column as box 02.
- health: card 06 Notification mail - the state of each record and a link to
Settings - beside Configuration, now 07, each half the width.
- help: a Notifications topic (what is sent, when, to whom, what makes it
arrive); Settings and Your account each gain a clause.
outlines.json rewritten with check.py --write: the structure of settings and
health changed. build.py: 35 pages; check.py: 32 screens, 52 sp- classes,
0 violations. The plan records both of his changes; step 1 of 10.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The owner's decision (2026-10-10): help is needed by almost every
section, not by Overview and Outbound alone. The Help mockup had six
topics while other screens already linked to topics it did not have
(#dmarc, #inbound).
- src/help.html: seventeen topics in five boxes - Overview (checks,
certificate, rdns), Outbound (dns, apps, limits, log, queue, dmarc),
Inbound (inbound, upstream, recipients, filter), Server (backup,
users, settings), Account (account) - one paragraph each, and the
side menu lists them by group.
- A box head gets the sp-help link where a topic now exists: health,
out-domain-settings, out-app, out-log, out-message, out-queue, the
three DMARC screens, in-domains, in-domain, backup, users, user,
settings. No link on boxes that explain themselves (confirmations,
the shown-once password, sign-in) and at most one per box.
- outlines.json regenerated (check.py --write): only help changed -
Outbound holds six topics, and Inbound, Server and Account are new
boxes. 0 violations.
The dns, dmarc and account topics describe the report-address scheme the
owner decided the same day (no reports / the SelfPost address / a typed
address, no user default); the account and out-domain-settings mockups
are redrawn for it in the change that follows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Owner's instruction (2026-10-09): in the kit Sign out had no hover tint and
stood out among Account and Help. The cause was in the design, not in the
implementation: the mockups drew Sign out as a link, the panel signs out
with a POST, and Bulma tints only a.navbar-item.
- build.py: Sign out is a form with a submit button carrying navbar-item,
as the real shell has to write it; all pages rebuilt.
- theme.css: the form stretches the button across the menu and the button
is handed Bulma's own hover / focus / active variables, so it answers
like the entries above it. No width, no colour of its own.
check.py: 32 screens, 48 sp- classes, 0 violation(s); outlines.json unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Review pass over `1.4.0`…`1.9.1`: port 25 no longer shares the submission milter chain, DMARC reports are validated before they are stored, and the auto rate limit is correct for a non-default level-1 window. Schema migration `0010` (index only). Upgrading is a tag bump.
Added:
- SQLite migration `0010_send_log_app_login_index.sql` —
- DMARC aggregate reports are accepted as **zip** as well as gzip or plain XML
- e2e: `checkPort25ConfigCombinations` regenerates the Postfix configuration
Changed:
- README hero line and a **Positioning** block in `docs/product.md` record the
Fixed:
- The setup account's password is hashed at bcrypt cost `12` like every other
- Login/setup rate limiter: protecting blocked buckets from eviction is now
- `postqueue -p` output is bounded to 4 MiB (the timeout alone left the size of
- [schema-migrations.md](docs/schema-migrations.md): the schema section was
- postqueue reader is now time-bounded: `postqueue -p` runs under a 5-second
… (11 more in CHANGELOG)
Changed:
- [roadmap.md](docs/roadmap.md) now carries everything the 2026-08-19 code
- Extracted `internal/configsafe` — the empty-value and forbidden-character
- Build, deploy and migration comments no longer cite the archived
- Dropped the `parseDomainRateLimitForm` / `parseAppRateLimitForm` pass-through
- Extracted shared helpers: `internal/atomicfile` (atomic temp-write+rename) and
… (7 more in CHANGELOG)
Removed:
- Unused legacy asset `docs/assets/icon.png` (superseded by the four brand SVGs
- Plan documents for already-shipped features: `domain-stats-auto-ratelimit`,
Full detail: CHANGELOG.md (1.9.2).