ee37d16dc7744cc7fa3dc156af473d1216b7c363
16
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  mixandClaude Opus 5.5
|
0ed03b2094 |
log tailer: expiry, Postfix's time values and refusal lines as Postfix writes them
test / test (push) Canceled after 0s
Expiry (assumptions A-8). Postfix 3.7.11 logs the end of a message's queue lifetime once per message, "<id>: from=<..>, status=expired, returned to sender" (src/qmgr/qmgr_active.c, qmgr_active_done_25_generic()), with no line per recipient; the tailer waited for "to=..., status=expired", which no Postfix writes, and the sweep closed only queued rows, so such rows stayed deferred. The tailer now reads qmgr's line (ExpireMessage: each recipient's newest open row of the id becomes bounced); the sweep closes a deferred row too when Postfix no longer holds the message, and counts as missed only a final line (sent, bounced, expiry). The queue listing's '#' (forced expiry, showq_compat.c showq_message()) is read as a flag (B-PQ1). Time values (B-PQ10, B-PQ11): conv_time() ported - one number, one lower-case unit, the parameter's default unit when none (get_def_time_unit: d for the lifetimes, h for delay_warning_time), the rest ignored; postconf -h -x expands $name; bounce_queue_lifetime capped at maximal_queue_lifetime as qmgr_post_init() caps it, so LongestLifetime is the queue lifetime. Refusals (A-21, A-23, A-24, A-15): smtpd_whatsup() ends the NOQUEUE line with sasl_username=<login> on an authenticated session; the line is now matched to its row by client, login and sender, and a line without a login is no application's. The client= line's login ends at the comma. The "IPv6:" trim goes (namaddr is built from state->addr). A row recovered from cleanup's line says that line names the last recipient only. Stand (2026-10-14, make e2e, exit 0): new expired_message_is_closed - defer_transports=smtp makes the retry service defer the message, postsuper -e and postqueue -i force its expiry; mail.log has "<id>: from=<alerts@sender.e2e.test>, status=force-expired, returned to sender" and the row goes deferred -> bounced; refusals_show_postfixs_line passes with the login match. go vet and go test ./... pass on the server. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
55aef6e721 |
sender check: the sender map read and looked up as Postfix does it
Postfix 3.7.11 takes the owners of the first key mail_addr_find() finds -
the address, then without its extension, then @domain, each tried only
when the one before is absent (src/global/mail_addr_find.c,
mail_addr_find_opt()) - and compares the login with them by
strcasecmp_utf8() (src/smtpd/smtpd_check.c,
reject_auth_sender_login_mismatch()). The check accepted a From: address
when any of the three keys named the application: an application holding
@domain could write an address listed for another application of the
domain, which Postfix refuses it in the envelope, and have it signed
(assumptions B-PS1).
The table is now read as dict_thash_open() reads it: continuation lines,
owners split on commas and blanks (B-PS4), the key ending at the first
blank outside quotes, keys folded; a key given twice makes Postfix refuse
the whole table (no DICT_FLAG_DUP_* flag), and the check then defers too.
The writer folds keys, so two cases of one address cannot be two lines.
e2e on the stand (2026-10-14, make e2e, exit 0): the wildcard application
is refused billing@ - listed for app-list - in From: (550 5.7.1), and in
the envelope by Postfix at RCPT ("553 5.7.1 <billing@...>: Sender address
rejected: not owned by user"). go vet and go test ./... pass on the
server (23 packages).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
b113e72c71 |
milter, postfix, app, domain: cite the source of what they rely on (assumptions part B)
Comments only, no behaviour changed. go-milter v0.4.1 (session.go: one session per connection, replaced after a non-continue reply; macros per stage), Postfix 3.7.11 (milter8.c, smtpd_check.c reject_auth_sender_login_mismatch(), mail_addr_find.c, showq_compat.c, mail_conf_time.c, mail_params.h), Cyrus SASL 2.1.28 (saslpasswd.c, plugins/sasldb.c: deleting a missing login is not an error), OpenDKIM 2.11.0~beta2 (opendkim-db.c, opendkim-genkey), Berkeley DB 5.3 db_dump, rspamd 3.11.0. Comments that claimed what the source denies are corrected (sasldb keeps the password as given, not hashed; an embedded newline is kept, not truncated; rspamd sorts symbols by absolute weight); fixtures say seen or composed. The sender check's From: parsing gets no citations: it is replaced by the port of OpenDKIM's dkim_mail_parse next. Contradictions left for their own commits: B-G5 cleanAddress, B-PS1 first key wins, B-PQ1 the forced-expire flag, B-PQ10/PQ11 Postfix's time units. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
60c7b85f84 |
findings of the reviews of audit stage 1
test / test (push) Canceled after 0s
Technical review (Opus) and security review (Fable) of 9efc9c7..a59e3d4; reports in the session's scratchpad. Fixed: - B1 (verified bug): store.UpdateStatus read before writing in its transaction; a commit by another connection in between (the dmarc-ingest process opens the same file) failed it at once with "database is locked" and the delivery line was lost. The first statement is now a write. - R3: a delivery line updated every row of its queue id and recipient; it now updates only the newest (Postfix reuses short ids). The sweep closes by row id (QueuedDelivery.ID, CloseUnreported(id)). - R4: a contradicted sweep keeps a mark, reason "reconcile-contradicted", instead of losing which row it was. - R1: contradicted cannot see a lost line (never read late). New counter reconcile_missed: at close, the sweep looks for the row's delivery line in mail.log and mail.log.1 (QueueLines). 0007 edited - it has run on no database but throwaway stands. - R2: queued_over_lifetime cannot measure "what removing the sweep would leave" while the sweep runs; its text now says rows stuck despite the sweep, and the rule uses closed - missed - contradicted. - cert-reload (R5, R6, R7, security medium/low): both files copied to .new and the copies checked as a pair before both are renamed; acts on the copy only when postconf says Postfix reads it; a failed reload is retried next pass; umask 077; says so when the mounted files cannot be read. The e2e case asserts Postfix reads the copy, the copy equals the mount, the key is 600 root. - Security low: a recipient with a quoted local part - the journal cut "a b"@x at the space, deliveryRe cut "a>b"@x at the ">" - matched no delivery line and was closed by the sweep. cleanAddress ends a bracketed address at the first ">" outside quotes; deliveryRe takes the recipient up to the ">, " before relay= (test fixtures given the relay= every real delivery line has). - Security low: postqueue -p's error carries at most 512 bytes of output. - Nits: addDeliveryLogDay refuses a column not on its list; the truncation test checks its message. - To stage 2b (page wording, mockup-first): the history step of a bounced row says the receiving server refused it, false for a row the sweep closed. To the owner when stage 2b is reached: since M13 the "deferred" figure counts whole messages too, which "Connections turned away" would not name. Found while verifying: the e2e's main positive path failed once with "553 not owned by user app1" - an smtpd idle from before the panel's reload took the connection in the reload's second. Measured on the stand (one-off probe, not committed): sending 0, 10, 40, 110 s after the save (two seconds at the soonest) always met an smtpd started after the reload. The e2e now waits for the sender map after each application it creates (waitForSenderMap: AUTH, MAIL, RCPT, RSET - no message, no row), and the level-1 case uses it instead of its own loop. Docs: architecture § Queue reconcile, schema-migrations (rows 7 and 8, chain head 8), CHANGELOG, audit plan (stage 1 note, the measured window, a new stage 2b line: 62 lines), roadmap 15/62. Evidence on the test server for this tree: go vet clean, go test ./... 23 packages ok, make e2e exit 0 (renewed certificate, hung panel, level 1 at 49/60). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
dfe10f6c27 |
postfix: a truncated postqueue -p listing is no listing for the sweep (audit H3)
QueueIDs parsed Queue()'s text, which caps postqueue -p at 4 MiB and appends a note, and returned the ids before the cut with no error: the reconcile sweep then closed every queued row past the cut as bounced while Postfix still held the mail. listQueue() now returns the text and whether it was cut; QueueIDs refuses a cut listing with an error (reconcile already treats an error as no information), the way postqueueJSON does for the notifier. Queue() keeps showing the cut listing with its note. postqueueP is a var so tests run a fake postqueue (the test binary as a helper process): 5 MiB -> QueueIDs errors, Queue ends with the note; 1000 bytes -> ids read. CHANGELOG [Unreleased], audit plan line ticked, roadmap 8/61. Evidence: go test ./internal/postfix ok (Windows); the server run of the stage follows before the push. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
f09b60aaa2 |
panel-notifications: findings of the technical and security reviews
test / test (push) Canceled after 0s
Neither review (read-only agents, Opus and Fable, over 972a9f8..400aa76) has a Critical finding. Both found the same serious one, and more: - The notification about refused mail was built on what a rejected row says of itself. Its domain is the one in MAIL FROM, which the client typed and Postfix has not yet held against the login when the milter refuses: an application over its limit could have had the panel write a message per made-up domain, to another tenant's users among others. And the same status is written when an application is refused for its client address, which is no limit. Refusals are now counted by the domain the login is registered under, only for logins that exist and only while a limit is set on the login or its domain; one subject per sending domain. They are read through a partial index of their own (migration 0005): the query walked the whole send log every minute. - Account and user e-mails were checked with the DMARC report validator, which refuses Gmail and the like - the owner's own kind of address. A new validate.AccountEmail accepts them and refuses a local part beginning "-". - "Said" now means sent: what arises while nobody can be told, or while Postfix does not take the message, is told at a later check. Its ending with nobody left to tell is simply over. - Two DNS checks must be 45 minutes apart as well as two: the last check before a restart and the first after it were minutes apart. - The notifier's own mail waiting in the queue, and its bounce coming back to postmaster@ this server, are not the queue's subject. A listing cut at its size limit or with a line too long to read is no listing; postqueue -j gets 30 seconds. - The tables must name the selector the panel shows, not only have the line. - An a/mx lookup that did not answer inside the SPF check made the record "not authorising"; it is "cannot tell" now, for the pages too. - A ceiling of 60 messages an hour; a pass stops between domains when the process is asked to stop; sendmail gets a WaitDelay; days are rounded as a person counts; a failed read of the switch shows it on, not off. Recorded as accepted in security.md, with a roadmap candidate (from-header-binding): an application can have a message signed as the server's own name - or, as always, as another registered domain - by writing it into the From: header, which nothing holds against the login. Left as found: a recipient whose copy failed while another's went out is not tried again; a certificate that lives under 14 days is reported at each renewal. On the test server, for this tree: go vet clean, go test ./... 23 packages ok, make e2e ok (326 s). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
50fd6b859f |
panel-notifications: the notifier, its mail and the server's own DKIM key
internal/notify applies the owner's rules. Each subject has a row of state, so a thing is said once and a restart says nothing again: - DNS of a sending domain: said after two hourly checks in a row found a record wrong, said to be over after two found it right. A lookup that did not answer moves nothing; a warning (no DMARC record) is not a subject. - TLS certificate: at 14 days and at 3, per certificate. - Queue: a message older than three days, once; once more when none is. - Level-2 limit: from the rejected rows of the send log, every five minutes; at most once a day per domain and application. Global users are told everything, domain users about their domains; one message per recipient. With the instance switch off nothing is checked and no state moves. A message that could not be handed to Postfix is tried again at the next check. Mail leaves by sendmail(1) as postmaster@<hostname>, addresses after "--", no shell. For it to be believed the server's own name is signed like a sending domain: domain.Service keeps a key for it and a line in OpenDKIM's tables without a registry row, and non_smtpd_milters now names OpenDKIM. A sending domain of the same name shares its key with the server. dnscheck.ServerMail checks the name's DKIM and SPF records; postfix.QueueMessages reads postqueue -j for arrival times. The notifier is a sixth role of the panel process. Nothing in the panel shows or switches it yet. Checked on Windows: go vet clean; go test passes for notify, store, postfix, dnscheck, cmd, and domain apart from TestWriteLoadPrivateKeyRoundtrip, which fails there on file modes and always did. Not yet run in a container: whether the unprivileged panel may submit is for the e2e step. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
a990e7cc23 |
delivery-log-storage: findings of the technical and security reviews
test / test (push) Canceled after 0s
Neither review (read-only agents, Opus and Fable, over ae06d8b..815236a) has a Critical or High finding. What they found and what was done: - A stranger on port 25 could grow the table: every queue-id line of inbound mail was stored and pruned an hour or more later, his own message-id among them. The tailer now leaves out the lines of a queue id that postfix/inbound/smtpd opened, until qmgr removes the message or another listener opens one under the id; 4096 such ids are remembered. - A commit, so a disk sync, per stored line on the connection the journal milter shares, and a backlog written line by line. Lines are now written in one transaction per pass over the log, 500 at most, before the read offset is saved (InsertSendLogLines; follow() calls the keeper's flush). - The prune asked the send log once per line and ran hourly. It asks once per queue id and runs at start and with the six-hourly sweep; with port-25 mail left out there is little without a row to wait for. - The 4096-byte cut could split a character; it keeps characters whole. - security.md did not say that a backup now carries these lines, and the plan said the time window excludes a reused queue id where it only limits the chance to the row's queue lifetime. Both are corrected; the collision is recorded as an accepted risk with its trigger. - Tests that did not prove their comments: the prune is now tested with the sweep, a rejected row next to the prune, batching and the change from catching up to following, port-25 mail left out and its id reused. Left as found and written down in the plan: lines the tailer never reads (a file rotated away while the panel was down), and a message in the queue across the upgrade, which shows only its later lines. On the test server, for this tree: go vet clean, go test ./... 22 packages ok, make e2e ok. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
1e6836b3c1 |
delivery-log-storage: a message's page reads its stored lines
The Delivery log box on a message's page was filled by searching the current
mail.log on every view; that file is rotated daily, so the box was empty for
anything not sent today. deliveryLog now asks the store for the row's lines -
its queue id, dated within the row's queue lifetime plus a day
(RetryPolicy.LongestLifetime) - and shows the latest 200, oldest first.
When nothing is stored the page still searches the current file, which is
what shows a message accepted before 2.2.0. When that finds nothing either,
the note no longer blames rotation for the ordinary case: it says lines are
kept with the row since 2.2.0. The Outbound log help topic in help.go follows
the mockup changed in
|
||
|
mix
|
7ef7f75246 |
release: 1.9.2: Review pass: port-25 milters, DMARC validation, rate-limit fix
Review pass over `1.4.0`…`1.9.1`: port 25 no longer shares the submission milter chain, DMARC reports are validated before they are stored, and the auto rate limit is correct for a non-default level-1 window. Schema migration `0010` (index only). Upgrading is a tag bump. Added: - SQLite migration `0010_send_log_app_login_index.sql` — - DMARC aggregate reports are accepted as **zip** as well as gzip or plain XML - e2e: `checkPort25ConfigCombinations` regenerates the Postfix configuration Changed: - README hero line and a **Positioning** block in `docs/product.md` record the Fixed: - The setup account's password is hashed at bcrypt cost `12` like every other - Login/setup rate limiter: protecting blocked buckets from eviction is now - `postqueue -p` output is bounded to 4 MiB (the timeout alone left the size of - [schema-migrations.md](docs/schema-migrations.md): the schema section was - postqueue reader is now time-bounded: `postqueue -p` runs under a 5-second … (11 more in CHANGELOG) Changed: - [roadmap.md](docs/roadmap.md) now carries everything the 2026-08-19 code - Extracted `internal/configsafe` — the empty-value and forbidden-character - Build, deploy and migration comments no longer cite the archived - Dropped the `parseDomainRateLimitForm` / `parseAppRateLimitForm` pass-through - Extracted shared helpers: `internal/atomicfile` (atomic temp-write+rename) and … (7 more in CHANGELOG) Removed: - Unused legacy asset `docs/assets/icon.png` (superseded by the four brand SVGs - Plan documents for already-shipped features: `domain-stats-auto-ratelimit`, Full detail: CHANGELOG.md (1.9.2). |
||
|
mix
|
20d88e1d9c |
release: 1.7.0: DMARC aggregate report ingest and panel summaries
Optional DMARC aggregate report ingest: accept `rua=` mail on port 25, parse gzip/XML into SQLite, and show summaries in the panel. Added: - Optional DMARC aggregate report ingest (`DMARC_REPORTS_ENABLE`): port 25 - Per-domain **SelfPost hosted** `rua=` mode when ingest is enabled Full detail: CHANGELOG.md (1.7.0). |
||
|
mix
|
656c4d4d7f |
release: 1.4.0: Optional inbound relay (backup-MX) on port 25
Optional inbound relay (backup-MX / forwarder) on port 25, off by default. Mail is accepted only for domains configured in the panel and forwarded to an upstream; there are still no mailboxes. A dedicated security review of the inbound path is still open on the plan (Fable). Added: - `INBOUND_RELAY_ENABLE` (default `false`): when true, Postfix listens on - Panel **Inbound** pages (global administrator): domains, upstream host/port - Optional `INBOUND_ANTISPAM_MILTER` on the inbound listener only, plus - Inbound rate limit (`INBOUND_RATE_LIMIT_MESSAGES_PER_IP`, default 20) and Changed: - Compose publishes host port 25 even when the flag is off (nothing listens - Full-backup restore Resync also rebuilds inbound maps when the flag is on. Full detail: CHANGELOG.md (1.4.0). |
||
|
mix
|
0730b2090e |
release: 1.3.0: 1.3.0-1.3.1: security pass, queue persist, full backup layout
[1.3.0] Security and quality after 1.2.5: domain-admin send-log authorization, fail-closed sign-in and application delete, level-2 rate-limit race fix, restore Resync, expanded tests, operator docs, release CI, and OFL for IBM Plex. Upgrading from 1.2.x is a tag bump; no migration. Added: - licence: the SIL Open Font License 1.1 text now travels with the IBM Plex - docs: agreed roadmap item **queue-retries** — show this Postfix's retry Security: - The independent security review of the send-log authorization and Fixed: - test (e2e): send-log status scrapers follow the badge markup in - security (panel): the Deliveries list is scoped to a domain administrator's - mail (level-2 rate limit): the ceiling is no longer overshot by messages that - panel (sign-in): a session that cannot be written to the database no longer - panel (applications): deleting an application removes its SASL credentials … (2 more in CHANGELOG) Changed: - docs: operator and as-built docs aligned with the code after a full - docs: [guide.md](docs/guide.md) reorganised into **Installation**, **Instance - docs: the 2026-08-13 full-tree review plan is complete — every phase (P0–P7) - licence: [NOTICE](NOTICE) tells modifiers to update `SourceURL` in - ci: the release image is published only for a **published** GitHub Release … (9 more in CHANGELOG) [1.3.1] Retry policy in the panel, persistent Postfix queue, and self-contained full backups. Mail queue and delivery history show this Postfix's first retry, backoff cap, and queue lifetime. Deferred mail survives container recreate. Full backups now archive `data/`, compose, `.env`, and `certs/`; the archive layout breaks 1.3.0 flat backups (unpack those with `tar xzf backup.tar.gz -C ./data` as before). Upgrading from 1.3.0 is a tag bump; no schema migration. Added: - Mail queue and a delivery's history show this Postfix's retry policy - docs: **Plan checklists** in [development.md](docs/development.md) — format, - docs: **Implementation checklists** with model routing in - docs: roadmap candidates **send-log-retention** (panel Settings for delivery - Postfix queue under `/data/postfix/queue` — deferred and active mail survive … (1 more in CHANGELOG) Changed: - **Breaking:** full-backup archive layout — paths are prefixed with `data/`; - docs: operator guide, architecture, security, and backup UI updated for - docs: HTML mockups for a full panel UI refresh Changed: - docs: panel UI mockups after review — Status restored to live readings - docs: panel UI design system and mockups rebuilt as separate pages - docs: panel UI mockups — add-domain sits in the list card (Domains and Fixed: - ci (GHCR): per-arch package tags (`X.Y.Z-amd64`, `X.Y.Z-arm64`) are dropped Squashed CHANGELOG sections: [1.3.0], [1.3.1]. Full detail: CHANGELOG.md (1.3.0, 1.3.1). |
||
|
mix
|
75207f0d1e |
release: 1.0.0: Public 1.0 image; delivery log; docs and SECURITY.md (incl. 1.0.1)
[1.0.0]
Added:
- A **Delivery log** on each delivery's page (`/deliveries/{id}`): the
- A **History** block on the same page: the journal's two timestamps stated as
Fixed:
- Postfix config: copy TLS cert/key from the (often `:ro`, host-owned) mount
- Postfix config: allow `maillog_file` under `/data` via
- E2e: read `/data/setup-token` via `docker compose exec` (file is `0600`
- Entrypoint: check `SELFPOST_HOSTNAME` before `/data` setup (so a bad identity
- E2e gate: wait for host-published `/healthz` before panel setup, and stop
… (3 more in CHANGELOG)
Changed:
- Document what `.spbk` and `.spde` stand for (SelfPost backup / SelfPost domain
- Docs aligned with the code: setup URL is `/setup/<token>` (README and
- Full backups no longer carry `/data/log`. It is Postfix's raw log plus its
- Monitoring screens (status, mail queue, system log, deliveries) use adaptive
- Documentation package consolidated into `docs/development.md`: Documentation
… (4 more in CHANGELOG)
[1.0.1]
A documentation and packaging release: no change to the mail path, the database, or the on-disk layout. Upgrading is a tag bump.
Added:
- `SECURITY.md` — how to report a vulnerability privately (GitHub private
- [docs/plans/](docs/plans/) — one document per agreed extension: the optional
Changed:
- The panel's **Account** entry is now called **Settings** — nav link, page
- The signed-in name in the panel's nav is now labelled `User:`, so it reads as
- [docs/product.md](docs/product.md) reframes the future line: the inbound
- [docs/security.md](docs/security.md) is now in English, matching the rest of
- The README documentation table now points at `SECURITY.md` for reporting a
… (2 more in CHANGELOG)
Fixed:
- The panel's static assets are served with a content ETag and
Squashed CHANGELOG sections: [1.0.0], [1.0.1].
Full detail: CHANGELOG.md (1.0.0, 1.0.1).
|
||
|
mix
|
5e5d157496 |
release: 0.5.0: Pre-1.0 security review, domain-admin role, doc consolidation
A bounce could be recorded as a successful delivery. The log-tailer's Fixed: - A bounce could be recorded as a successful delivery. The log-tailer's - Log-tailer resumes where it stopped instead of jumping to end-of-file on - Level-2 rate limit no longer overshoots under concurrency: messages that Changed: - The project has a single public home: `github.com/mixeme/selfpost`. Codeberg - Code comments no longer cite the archived specification. References like - `docs/code-review.md` is gone. Its plan is finished — phases 0 (bar the - `docs/architecture.md` gained a *Code layers* section: a diagram of - Phase 1 doc/code hygiene (`docs/code-review.md`): removed ~30 stale … (1 more in CHANGELOG) Security: - Pre-release security review (plan § D, model Fable, 2026-08-06): full pass - `saslpasswd2` argv: the application login is now passed after a `--` Added: - Optional password encryption for the two secret-bearing downloads (plan - Domain import accepts an encrypted export: the envelope is detected by its - `selfpost-backup` writes encrypted archives and reads them back: - `TestParseDelivery` covers the exotic mail.log shapes the review asked for - docs: README *Encrypting a backup or export*; `docs/security.md` § … (14 more in CHANGELOG) Removed: - docs: `security.md` — accepted risk «restore old backup revives session rows» Changed: - docs: `implementation-plan.md` trimmed to the sole open v1.x gate — pre-release - docs: `architecture.md` — sessions (SQLite, idle renew, password change), - docs: `development.md` — expanded e2e stack and `release.yml` matrix workflow. - docs: `security.md` — accepted risk for send-log rows stuck at `queued` after - docs: `roadmap.md` — optional send-log / `mail.log` follow-ups under v1.x tail. … (10 more in CHANGELOG) Full detail: CHANGELOG.md (0.5.0). |
||
|
mix
|
8ce050ef7f |
release: 0.1.0: Phases 0-11: panel, Postfix/DKIM, milter, backup, Docker image
Initial feature-complete implementation of the v1.0 specification (phases 0-11 of `docs/implementation-plan.md`). Added: - Panel (Go, single static binary) with SQLite persistence, one-time - Domain management with per-domain DKIM (RSA-2048, generated in pure Go) and - Application (sender identity) management: SASL credentials via `sasldb2`, - Full Postfix relay config generated from env at container start: SMTPS 465, - Journal milter (pure Go, `go-milter`) recording every send to `send_log`; … (6 more in CHANGELOG) Full detail: CHANGELOG.md (0.1.0). |