The panel now suggests policy-only DMARC by default, lets operators configure a default and per-domain report address, and DNS-checks hub _report._dmarc records. Future in-panel report ingestion is tracked as dmarc-reports in the roadmap.
Co-authored-by: Cursor <cursoragent@cursor.com>
Mode and rate limit were <details>, so each opened where its own toggle sat
and split the row of four controls in two, pushing New password and Delete
below a block of fields. The toggle is now a hidden checkbox with its label
drawn as the button and the panel is the last child of the row, so the
controls keep their places and the fields are laid out beneath all of them.
Pure CSS, so it still works with JavaScript blocked, as the disclosure did.
The panel buttons take back the form spacing the compact row style zeroes
out, and Save limit and Remove limit share one row: two posts mean two
forms, so the first button is bound to its form by the form attribute
instead of sitting inside it.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The navigation was a bar across the top that did not fit on one row — six page
entries and the session block against the panel's width — and had to be split
into two, costing the top of every page. It is now a column down the left edge:
one left edge to scan, the current entry marked down its leading edge, sticky so
it stays in view, and room under the entries for the current page's own
sections. Below the width the two columns need it lies back down into the same
wrapping rows as before; six entries need no drawer.
The section index is for the two pages long enough to need one — the domain page
(nine cards) and the status page (eight). Each card carries an id and the page's
template defines the list by overriding an empty "sections" block in the layout,
so a page that defines nothing renders no index. panel.js marks the section in
view, looking targets up by id on each pass so the status page swapping its
cards out every five seconds cannot leave it measuring boxes that have left the
document; the links themselves are plain fragment links and need no script.
Verified against the real pages rendered by a local panel at 1300px, 924px and
481px wide.
Both secret-bearing downloads can now be sealed with a password. Unticked, the
forms produce exactly the files they did before.
- internal/secretfile: envelope format — magic/type/scrypt params/salt/nonce
prefix header, then 64 KiB AES-256-GCM chunks each authenticated with the
header, its counter and an end-of-stream flag, so truncation, reordering and
tampering fail to open instead of restoring a plausible prefix. Streams both
ways, so a full backup never sits in memory.
- Panel: "Encrypt with a password" checkbox on the full-backup and
domain-export forms (shared partial, toggled from panel.js — no inline
script); domain import detects an encrypted export by magic bytes, not by
extension, and asks for the password.
- selfpost-backup: writes .spbk when given a password and converts one back
with -decrypt, which a restore needs. The password comes from
SELFPOST_BACKUP_PASSWORD or -password-file, never argv.
- Docs: README, security.md (+ accepted risk: encryption stays opt-in),
architecture.md, progress.md, CHANGELOG.
Verified locally: panel-encrypted archive decrypts through the CLI and unpacks;
wrong password and password mismatch are refused; UI checked in a browser.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A non-Latin subject arrives as RFC 2047 encoded-words, which the send-log
printed verbatim: unreadable, and one unbreakable run wide enough to push the
Status column out of its card. Decode at journal time (UTF-8/ASCII; exotic
charsets keep the raw header) and cap at 200 characters, then clip the column
to one line with the full text in the tooltip so no subject can widen the row.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The side-by-side .split row read badly: main is capped at 48rem, so the
applications table had to live in roughly 27rem and its actions column
squeezed four controls into it.
Put the create form directly above the list instead — the order the
domains page already uses for "Add a sending domain" above "Domains" —
and delete .split, which nothing else used. The empty-state text follows
the same page's wording.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The domain page generated and displayed the DKIM record but said only
"also configure SPF and DMARC for the domain (see the documentation)".
The concrete example existed — buried in the check's remediation text,
and only visible once the check had already failed. Show both records up
front, host and value with a Copy button, the way the DKIM record is
shown, plus the two things that actually bite: a domain may carry only
one SPF record (add the mechanism to the existing one rather than
publishing a second), and p=none is safe to publish immediately.
The SPF value names the addresses SELFPOST_HOSTNAME resolves to, taken
from the hostname check the page already runs, and falls back to an "a:"
mechanism when it does not resolve. New dnscheck.SPFExample/DMARCExample
are the single source for both the page and the checks' advice, so the
two cannot drift into recommending different records; dnscheck.Query
gains Hostname for the fallback.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
On the domain page the "Add an application" card sat below the domain rate
limit, so adding a login meant scrolling past the list and back. Move it up
next to the Applications table and wrap the pair in a .split grid (1.5fr /
1fr, so the table keeps the wider column). The columns collapse to one below
52rem, list first, and the grid gap keeps the same vertical rhythm as
.card + .card.
The empty-state text said "Create one below", which is no longer where the
form is; it now names the card instead of its position.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Groundwork for the Content-Security-Policy of phase 14.A. A policy that has to
allow inline script is not worth writing — script-src 'unsafe-inline' gives
back exactly the XSS foothold the policy exists to remove — so the three
inline constructs the templates still had are moved out first:
- the layout's <style> block becomes /static/panel.css;
- the one style="background:#b42318" attribute becomes the .danger class
that already existed for it;
- the four onsubmit="return confirm(...)" handlers become data-confirm,
handled by a delegated listener in panel.js. Delegation matters: the
application rows are also delivered by HTMX swaps.
htmx would otherwise inject a <style> of its own for the request-indicator
classes and become the single reason the policy needs an exemption; the panel
uses no hx-indicator, so the meta config switches it off.
A guard test keeps this from silently regressing later, which it otherwise
would: an inline handler added to a template does not fail, it just quietly
stops working in the browser.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Phase 13. Two new packages and one new screen.
internal/health owns the shared status vocabulary (ok/warn/error/unknown)
and the local checks: supervisord's process table, TLS certificate expiry
and the two milter sockets. Each check reports a problem as a status rather
than an error, so one broken component costs a line and not the page.
internal/dnscheck does the read-only lookups: forward-confirmed reverse DNS
for SELFPOST_HOSTNAME, and per-domain DKIM (compared against the key this
server actually signs with), SPF and DMARC. Every check is bounded by a
timeout and cached, and the resolver sits behind an interface so the tests
drive every branch without touching the network. The SPF check is
deliberately shallow: it looks for a mechanism literally covering the
server's address and does not follow include:/redirect=, so a record that
authorises us through an include is reported as "cannot tell" rather than
as a failure.
/status renders both, with the local checks in an HTMX-polled fragment and
the DNS lookups behind a Re-check button, and becomes the panel's landing
page: / now redirects there and the domain list lives at /domains. The
Reload button moves onto /status, where it reads as what it is — a
drift-recovery for the daemons — with text explaining what it regenerates.
A template test fails on any remaining href="/" so a stale link cannot
silently land on the wrong screen.
Also fixes a defect this made visible: the panel could never read the mail
queue in the documented deployment. postqueue relies on its setgid-postdrop
bit, which the compose file's no-new-privileges disables, so the Queue
screen always said "Could not read the mail queue" — including in the
released 1.0.0 image. The panel user is now a real member of postdrop,
which needs no setgid transition.
Verified in a container on the dev server against real DNS: PTR matching
(selfpost.example.com) and not matching (example.com), DKIM absent and
mismatched, SPF absent and via include:, DMARC p=quarantine/p=reject/absent,
and a resolver timeout degrading to "unknown" without hanging the page.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Phase 12 (UI/UX). The navigation bar now renders once from layout.html
instead of being copied into each content template, so it is present on
every authenticated page — including the domain page and its delete
confirmation, which had no links at all — and the current page is
highlighted via .Active rather than quietly dropping out of the list.
New /account page changes the administrator's username and/or password:
the current password is required and the attempt is throttled on the same
limiter as the login form, so this route cannot be used to brute-force
past that limit. A password change invalidates every other session while
keeping the one performing it; a rename carries that session over.
Backup and domain import move from a card in the middle of the domain
list to their own /backup page, one card each; the handlers themselves
are unchanged, only the page the import form renders its errors on.
The domain page gains a "Sending server settings" card (server, port,
encryption) so a client can be configured without reading the docs; 587
is listed only when SUBMISSION_ENABLE is true for this deployment, which
is a deploy-time flag the panel cannot verify at runtime.
Client-side (static/panel.js, no libraries): Copy buttons on the values
that get carried elsewhere (DKIM record, new application credentials,
server name), and the Addresses field is hidden while the address mode is
wildcard, where the server ignores it.
Verified in a container on the dev server: setup, login, every page's
nav and active item, domain and application creation, all account-form
paths including cross-session invalidation, import errors, full backup
download. gofmt/vet/test/docker build green.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Full server backup (spec 7.5.A): internal/backup produces a tar.gz of all of
/data — a consistent SQLite snapshot via VACUUM INTO, DKIM keys, sasldb2 and a
version manifest; TLS certs (tls/) and the Postfix queue are excluded. Two equal
paths: the panel button (POST /backup, no-store) and the selfpost-backup CLI via
docker exec (spec 11.6). CheckRestore runs before store.Open: a manifest version
mismatch refuses to boot with the image tag to use; a match consumes the
manifest so it only guards the first post-restore boot. Restore is not a
separate branch — Postfix/OpenDKIM regenerate from the restored SQLite as on any
start.
Domain export/import (spec 7.5.B): DomainExport carries the DKIM private key and
each application's working password. SASL secrets are read from sasldb2 via
db_dump (the userPassword property is plaintext) and, on import, re-keyed under
the local realm with saslpasswd2 — so credentials keep working on an instance
with a different hostname, with no DKIM DNS change. Import validates and rolls
back atomically on any failure. db-util (db_dump) is now an explicit image dep.
Verified on the server (selfpost:p9): gofmt/vet/test green; container e2e for
cross-realm domain export/import (SMTP AUTH 235 under the new realm), CLI and
panel backups, same-version restore, and version-mismatch refusal.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The journal-milter, until now a pure monitor, now refuses a message with a
4xx tempfail (RespTempFail/451) at MAIL FROM when a per-domain or per-
application limit is exceeded. Key is the client IP; the count is
COUNT(DISTINCT queue_id) over a sliding window reusing the send log; the
limit applies only when a non-empty IP binding matches the client (empty
binding => level-1 only, per spec 7.4). Enforcement is fail-open on the
milter's own errors — a limiter malfunction never blocks mail, and Postfix's
level-1 anvil limit stays the independent backstop. Refused messages are
recorded in send_log with status "rejected" for UI visibility.
- store/ratelimits.go: RateLimit type (+Active/AllowsIP), id-keyed get/set/
delete for the panel, name/login-keyed lookup + windowed distinct-message
count for the milter, DeleteRateLimitsForDomain. No migration — the
rate_limits table has existed since Phase 2.
- milter: enforce at MailFrom, fail-open helper overLimit, InsertRejected.
- web: server-side validated IP/ceiling/window forms on the domain page and
per application; routes POST /domains/{id}/ratelimit and
/applications/{aid}/ratelimit. Milter reads rows live, so no reload.
- domain/app services clear limits on deletion (rate_limits has no FK cascade).
Unit tests + container e2e (p8) green: refusal on both scopes, unregistered
IP ignored, fail-open with the panel stopped.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Adds application accounts bound to domains: a SASL login/password in
sasldb2, a per-application address mode (wildcard @domain or an explicit
list), and matching smtpd_sender_login_maps bindings — with create,
list, edit-mode, delete and password regeneration (spec 4.1, 5.1,
7.2.5-9). Generated passwords are shown exactly once and never stored in
plaintext (7.6.1).
- internal/store/applications.go: transactional CRUD; globally unique
login; ListBindings (address->login) as the map source; logins-by-
domain for pre-cascade SASL cleanup.
- internal/app: saslpasswd2 wrapper (password via stdin, login as a
whitelisted argv element, no shell — 7.6.3); strong base64url password;
address validation that enforces domain ownership before any config
write (7.6.2); service orchestrating store + sasldb2 + map with full
rollback on partial failure.
- internal/postfix: sender_login_maps regenerated as a pure function of
the registry (many-to-one logins merged per address), atomic write,
injection backstop (7.6.4).
- Postfix reload, corrected: `postfix start-fg` forks a separate master,
so signalling the supervised process never reaches it. Reload now runs
the canonical `postfix reload` via a one-shot supervisord program the
unprivileged panel triggers over the group control socket. Verified in
mail.log.
- domain.Service.Delete purges the domain's SASL accounts, then cascades,
then rebuilds the sender map and reloads; manual reload now covers both
OpenDKIM and Postfix.
- web: application management in the domain page, one-time credential
shown inline; postfix joins the selfpost group and entrypoint normalises
/data/sasl and /data/postfix (setgid, group-readable) with self-heal.
Verified on the dev server: gofmt/vet/test green, image builds, and a
container e2e covers the full application lifecycle, domain-delete
cascade, restart persistence, and a real postfix reload.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add/list/delete of sending domains with per-domain DKIM keys and the
OpenDKIM tables that drive signing (spec 6, 7.2.2-4, 7.2.10).
internal/domain:
- Pure-Go RSA-2048 keygen; PKCS#1 PEM written atomically at 0640; the
published DNS TXT record is derived from the key on disk (single source
of truth) rather than persisted. No os/exec for key generation.
- KeyTable/SigningTable fully regenerated from the registry on every
add/delete (idempotent), written atomically; SigningTable via refile:
with *@domain, KeyTable with absolute key paths. Table writer refuses
any unsafe character as a backstop (spec 7.6.4).
- Reload without root: the unprivileged panel signals OpenDKIM through
supervisord (`supervisorctl signal USR1 opendkim`, fixed args, no
shell, no user input — spec 7.6.3). An existing key is reused, never
overwritten, so re-adding a domain keeps its published DNS valid.
- Service orchestrates registry -> key -> table rebuild -> reload, with
rollback of the row if a downstream step fails; delete cascades apps
via the DB FK and removes the key + table entries.
Infra:
- Shared `selfpost` group bridges panel (writes keys) and opendkim
(reads them); /data/opendkim is setgid so panel-created files inherit
the group, keys are 0640, RequireSafeKeys is disabled by design.
- opendkim.conf moves from verify-only (Mode v) to signing (Mode s).
- entrypoint.sh normalises the DKIM tree on every start (ownership,
setgid, perms, empty tables before opendkim starts) — self-healing
after a restore.
- supervisord control socket opened to the `selfpost` group so the panel
can request the reload.
web/store:
- Strict domain-name validation (whitelist [a-z0-9.-], DNS shape, >=2
labels), lower-case normalisation (spec 7.6.2).
- Domain queries with application counts; delete relies on ON DELETE
CASCADE. Dashboard lists domains + add form; domain page shows the
DKIM record; a dedicated confirm page warns about the app cascade
before deletion (spec 7.2.4); manual reload button (spec 7.2.12,
OpenDKIM side; Postfix reload lands in Phase 5).
- Authenticated routes moved to a sub-mux using Go 1.22 method/wildcard
patterns.
Tests: validateDomain, DKIM keygen/record roundtrip, table rendering +
injection-safety, key reuse, store cascade. Verified on the dev server:
gofmt/vet/test green, image builds, container e2e (add/delete a domain,
DKIM record shown, OpenDKIM reads panel keys and reloads, keys and
tables persist across a restart).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
mix
mixeme