f1d90a2a1bfa11247bbf338ae07fb77362f8e3cd
29
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  mixandClaude Opus 5.5
|
faa3c11ae7 |
panel-dkim-signing stage 2: OpenDKIM removed
test / test (push) Canceled after 0s
The panel's signer is the only one. Gone: the opendkim package and its
configuration, the syslog-relay and opendkim programs, /dev/log and
/run/opendkim, the reload by USR1 through supervisord
(internal/supervisor/supervisor.go), internal/syslogrelay, the port of
OpenDKIM's From: parser (internal/milter/mailparse.go and its probe,
harness and test/upstream scripts), OPENDKIM_SOCKET and OPENDKIM_DIR.
Keys: internal/domain/keys.go (Keys, NewKeys, DKIM_DIR=/data/dkim) keeps
the keys and writes a selector table, /data/dkim/selectors ("<name>
<selector>"), which the signer reads in place of the KeyTable - it reads
no database, as the sender check reads none. The table is written before
the signer serves (EnsureServerSigned moved there from the notifier).
Keys and table 0600, directories 0700, the panel's. The entrypoint copies
/data/opendkim/keys once, as the panel user, into /data/dkim.new renamed
when whole, and stops the start if the copy fails; /data/opendkim is left
for a rollback to 2.7.x.
Sender check: one RFC 5322 address as a mail program reads it, held
against the bindings; the 256-byte refusal and the texts naming OpenDKIM
go. Allowed() folded the domain through strings.ToLower, which makes the
Kelvin sign a "k" - the comparison with OpenDKIM's reading had hidden it;
it folds ASCII only now.
Health: two dkim-signer rows (applications, notifications) in Milter
sockets, opendkim out of the liveness set; the card no longer takes any
row with a note for the spam filter. Texts as in the design commit.
KILL stays in deploy/docker-compose.yml: measured on the test server,
root without it cannot signal a process of another uid - supervisord
stopping the panel, Postfix's master its children. The plan's "only use
was the reload" was wrong; the comment now gives the real uses.
e2e: one signature, the panel's, verified by dkimpy; the /data/dkim modes;
the OpenDKIM log and process checks, testNeverSignedForAnother and the
cited opendkim, libopendkim11 and libmilter1.0.1 go.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
14de9a05c8 |
panel-dkim-signing stage 1: the panel's DKIM signer, beside OpenDKIM
internal/milter/sign.go: a milter on two sockets (cmd/panel/signer.go): sign.sock for 465/587, the key of the domain the SASL login belongs to (Bindings.DomainOf, the sender_login_maps Postfix reads), and sign-local.sock for the panel's own sendmail(1) mail, the server's name. go-msgauth/dkim v0.7.0, relaxed/simple, OpenDKIM's dkim_should_signhdrs[] (libopendkim/dkim.c:223-246) in message order plus From once more; keys and selectors from the KeyTable the panel writes, a key path outside the key directory refused; strict - whatever cannot be signed is deferred. From the sources: Postfix 3.10.13 milter8.c:2329-2400 hands a folded header \n-separated, so the signer joins its lines with CRLF; inserts are 1-based in cleanup_ins_header() (cleanup_milter.c:1193), so index 0 is the top, where OpenDKIM puts its own (opendkim.c:3673). go-milter v0.4.1 calls no Abort when a connection ends, so a watchdog closes go-msgauth's streaming signer after an hour and a late end of message is deferred. Postfix: smtpd_milters = sender check, signer, OpenDKIM, journal; non_smtpd_milters = the signer's local socket, OpenDKIM - both sign every message until stage 2. disable_mime_output_conversion=yes (default off, mail_params.h:3088): an 8-bit message is no longer re-encoded after it is signed. Tests: unit tests sign and verify folded, tab-led and space-free headers, an added From:, a changed body, two messages on a connection, odd bodies, and five cases deferred. e2e: the sink image has python3-dkim (dkimpy 1.1.8-2) and the stand's DNS; on an application's message and on a notification the two signatures must agree on h=, bh=, c=, s=, a= and each must pass dkimverify. On the server: make e2e exit 0 (714 s), go vet + go test 27 packages ok. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
a3050afb66 |
base-trixie: findings of the reviews
test / test (push) Canceled after 0s
Security review ( |
||
|
mixandClaude Opus 5.5
|
1c6e04b7d3 |
base-trixie: the image on Debian trixie, Postfix 3.10.13; Received: hidden on 465/587
test / test (push) Canceled after 0s
The runtime base is debian:trixie-slim, the build stage golang:1.26-trixie:
Postfix 3.10.13 with upstream's 2026 security fixes up to the August
batch, libmilter 8.18.1, OpenSSL 3.5. Every citation of another program in
code, scripts and documents was re-read against the trixie sources
(dev/upstream; bookworm's kept in dev/upstream-bookworm) and updated;
development.md's cited-package table holds the trixie versions.
What the re-reading changed in behaviour:
- logtail: reject lines with sasl_method/sasl_username/sasl_sender
(smtpd_check.c:1019-1026); cleanup's "removed (canceled)" forgets a
port-25 id (cleanup_api.c:363-364).
- internal/postfix/retry.go reads postconf's stdout only: since 3.9 a
deprecated-parameter warning on stderr made one value too many and the
panel fell back to the compiled-in retry policy.
- logrotate-loop.sh: logrotate 3.22 exits 1 when it ignores a config;
the loop refuses on that output whatever the status.
- postfix-config.sh: cyrus_sasl_config_path set explicitly (bookworm's
07_sasl_config.diff is gone); maillog_file_permissions=0640; mynetworks
explicit; Dockerfile: SYNC_CHROOT= in /etc/default/postfix,
opendkim-tools dropped, openssl named, systemd-standalone-sysusers so
cron does not bring the whole of systemd.
- The selfpost group is 10998, outside the system range 100-999: in
trixie a package took 998 and the build failed (owner's decision:
a conflict-free id, the distribution's own ids untouched). The
entrypoint hands /data back by name when the user or the group differs.
Guide, backup refusal text, help (design commit
|
||
|
mixandClaude Opus 5.5
|
aaa94120be |
port 25 ends DATA only at CRLF.CRLF: smtpd_forbid_bare_newline=normalize (port25-bare-newline)
Postfix 3.7.11 leaves its 2023 SMTP-smuggling defence off (default "no" before 3.9, src/smtpd/smtpd.c:807), and the inbound relay's smtp/inet listener did not turn it on: a "." line ended by a bare LF ended DATA and what followed was read as the next transaction. The listener now sets normalize (bare_lf_mask_table, smtpd.c:1656; the DATA loop drops such a "." line, 3649-3652), the setting Postfix recommends and 3.9's default. The submission ports keep the default (own-mta-builds, section 5). Tests: e2e inbound_bare_newline_is_one_message sends the smuggling sequence over raw SMTP (net/smtp's DotWriter would rewrite the bare LF) and finds one message at the upstream with the smuggled part inside; port25 config check asserts the parameter on smtp/inet. On the server: make e2e exit 0 (511 s), go vet + go test 27 packages ok. Docs: CHANGELOG [Unreleased] Security, security.md, architecture.md, guide.md; roadmap: port25-bare-newline, base-trixie and panel-dkim-signing agreed by the owner in this order. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
a39eda5a0b |
audit 5: findings of the two reviews
- The e2e's numeric-settings test ran a container that passed every gate
and never ended: the good values are checked beside a bad one after
them; each run is named, bounded to a minute and removed.
- The gates refuse a value under the parameter's minimum (a zero window
kills anvil, a zero milter timeout smtpd) and one past an int, in
seconds for a time value (src/global/conv_time.c, src/anvil/anvil.c).
- OpenDKIM waits, five seconds at most, for the relay's socket.
- The relay marks its lines `syslog: `, writes control characters out,
reads into a queue at once and drops past 200 lines a second, saying
how many (security F1, F2; a stuck relay would hold OpenDKIM in
syslog(3)).
- smtp_tls_mandatory_protocols >=TLSv1.2 too.
- extract-cert.sh keeps the old files' group and sets its trap before
mktemp.
- crashexit spares cert-reload; architecture.md "four times running" and
what else exits the container; security.md the restart after five panel
exits and the /dev/log socket.
- Measured against the technical review: smtpd has the selfpost group
(Groups 104 998), so it did reach the supervisor socket before this
stage.
Accepted, reasons in the plan: the logrotate state file in the postfix
user's directory, envdoc_test's reading of `${VAR:-}` only, crashexit's
window pruning untested.
Tested on the test server: go vet + go test of 27 packages, make e2e (all
pass, 592 s) on this tree.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
cad1182150 |
audit 2c: what only the stand could answer, measured and written down
test / test (push) Canceled after 0s
All 2026-10-15; each written beside the code or text it settles. - A-43: /usr/sbin/postlog is -rwxr-xr-x root:root in the image (postfix 3.7.11-0+deb12u1; dpkg-statoverride lists postdrop and postqueue only): Debian does not install it set-gid, so it is no use to dmarc-ingest (cmd/panel/dmarc_ingest.go). - C-X1: OpenSSL 3.0.22 in the image prints the same public key from `x509 -pubkey` and `pkey -pubout` for RSA-2048, P-256, P-384 and a SEC1 P-256 key - cert-reload's same_pair holds for certbot's ECDSA keys. - C-K5, D-guide:933/:233: on the live server (Docker 29.6.1, userland proxy on 0.0.0.0 and ::, no IPv6 on the network) an outside IPv4 client and the host's own public IPv4 address are logged as themselves; the host's IPv6 address and 127.0.0.1 arrive as 172.18.0.1. Over IPv6 every client is the gateway: one level-1 budget, an application IP list cannot name them, rspamd sees the gateway. Guide paragraph under level 1, notes at the milter and allow-list, comments at the anvil setup and authip.go, and a Security entry in the CHANGELOG (an allow-list naming the gateway would admit every IPv6 client). - D-guide:61: a published port nothing listens on (a throwaway container, -p 20999:25) is refused from outside over IPv4 and from the host's public IPv4, accepted and closed through 127.0.0.1 - Docker's proxy, which IPv6 goes through too (not probed over IPv6 for this). - C-M8: the live installation has received one DMARC report, of one record: nothing to set maxReportRecords by yet - said at the constant. - D-S7, D-arch:516, D-arch:532: a new database filled through the store to 120 days at 1 900 messages a day (228 000 messages, 1.37 million lines, 464 MB) on the test server (2 cores): the longest write is the line prune after a 30-day gap, 1.9 s for 342 000 lines (0.4 s with nothing to delete); the send-log delete 0.6 s; 2 000 lines of a tailer pass 18 ms; VACUUM INTO 1.7 s; a second connection writing every 50 ms waited 1.8 s at most, no SQLITE_BUSY - inside busy_timeout's 5 s. architecture.md's "about a second per million lines" was five times too fast; its "six to ten lines of 200 bytes" is 6.0 lines of 146 bytes on the live data. - D-B16: which favicon is fetched, by the probe server's log: Edge 155 the SVG, the desktop app's embedded Chromium 152 the PNG, with or without sizes="any" - layout.html's "vector wins where supported, raster catches the rest" holds; Firefox and Safari not measured. - D-arch:121: the allow/deny trial again, in rspamd/rspamd:3.11.1-3 with today's multimap.conf: every mix of allow and deny entries matching one message ended reject; a changed map was used about 10 s later. - D-sec:424: rspamd runs as _rspamd, uid 11333; the panel is uid 999. Stand: go vet and go test ./... pass on the server (24 packages); make e2e exit 0. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
fbd0acd035 |
audit 2c: the rest the sources contradict, and the documents
test / test (push) Canceled after 0s
Code and config: - C-M7: a DMARC report's explicit <pct>0</pct> stays 0; only an absent pct takes RFC 7489 § 6.3's default 100 (Pct *int). - C-D1: docs/development.md now tables the Debian versions the citations were read at (postfix 3.7.11-0+deb12u1, opendkim and libopendkim11 2.11.0~beta2-8+deb12u1, libmilter1.0.1 8.17.1.9-2+deb12u2, libsasl2-2 and sasl2-bin 2.1.28+dfsg-10, supervisor 4.2.5-1, logrotate 3.21.0-1 - read off the image with dpkg-query, 2026-10-15); the e2e stand's new checkCitedPackageVersions fails when the image it built differs. - C-E2: the e2e zone's SOA serial only grows (CoreDNS v1.14.6's file plugin reloads on a grown serial, not on mtime); Corefile comment says so; TestZoneSerialGrows. - C-K8, C-K9: the e2e compose and stage comments say how --project-directory and .env resolve. - D-arch:154: postfix-config.sh's "Postfix insists" comment says what TLS_README advises and that smtpd reads the key as root. - B-G7: inflight.go's reservationTTL comment: a dropped client does give ABORT (smtpd_proto() -> mail_reset() -> milter_abort()); the TTL is for smtpd dying or the milter connection breaking. - D-guide:301: the nginx fragment's first-certificate command now reaches certbot (--entrypoint certbot, --standalone, port 80 free), and the renewal loop passes --webroot -w /var/www/certbot - a standalone certificate would otherwise renew standalone while nginx holds port 80 (certbot docs, "Renewing certificates": the issuing plugin is used "unless you specify other plugins or options", and options of a successful renewal are saved). The register's proposal missed that. Documents: every D-arch, D-guide and D-sec claim the register's Answers E found false or partly true, rewritten - by three Sonnet agents, one per document, then reviewed: two proposals were obsolete after this stage's fixes and not used (a bounce's From: line - extract_from = "smtp" now; "Origin: null" - Referrer-Policy is same-origin now); a stand observation the agent had dated from a commit is now tied to the e2e test that checks it; the SQLite writers paragraph describes _txlock=immediate; the log tailer's rotation paragraph describes the minute's grace; the guide's nginx steps were put in working order (links and modes before `up`, no reconfigure step). "Deferred" is kept for Postfix's queue in the guide too. guide.md's CRLF from the agent normalised. Stand (2026-10-15, make e2e, exit 0, the version gate and zone serial test included); go vet and go test ./... pass on the server (24 packages). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
e174537512 |
postfix config: port 25's size limit for cleanup too, no local delivery
Port 25 says it takes INBOUND_MESSAGE_SIZE_LIMIT (25 MiB by default) with smtpd -o message_size_limit, but cleanup writes the queue file under its own limit, main.cf's - never set, so DEF_MESSAGE_LIMIT, 10240000 (Postfix 3.7.11, src/cleanup/cleanup_init.c, cleanup_post_jail(), set_file_limit(); src/global/mail_params.h). A larger message went through DATA and was refused 552 (assumptions C-P31). cleanup now gets port 25's limit as a master.cf -o when it is larger than main.cf's; 465 and 587 keep main.cf's in smtpd's own DATA/BDAT checks. /etc/postfix outlives a restart, so the override is removed with postconf -PX first on every start. An empty mydestination left one local destination: an address literal of an interface the container listens on (src/global/resolve_local.c, resolve_local(), own_inet_addr()). local_transport is now "error:local mail delivery is disabled", as STANDARD_CONFIGURATION_README's null client has it (assumptions C-P8). Stand (2026-10-14, make e2e, exit 0): inbound_relay_delivers_and_refuses sends a 12 MB message through port 25 and finds it at the upstream, and counts it among the Inbound log's rows; new address_literal_is_not_local - probe@[127.0.0.1] from an application is refused at RCPT "550 5.1.1 ... local mail delivery is disabled" (smtpd's check_rcpt_maps() rejects what resolves to the error transport; before, local(8) took it). go vet and go test ./... pass on the server (23 packages). Tested together with the next commit (the log tailer); the two touch no common file. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
599149bf83 |
build, deploy, inbound, dmarc, backup, e2e: cite the source of what they rely on (assumptions part C)
Comments only, no behaviour changed. Each main.cf/master.cf parameter the
build sets, the wrapper's and the reload hook's reliance on Postfix 3.7.11
(postfix-script, master.5, postconf.5, cleanup_init.c, smtpd_peer.c,
README_FILES), supervisor 4.2.5 (process.py, options.py, events.rst),
logrotate 3.21.0, OpenDKIM's config, Cyrus SASL's sasldb, rspamd 3.11.1
(milter_headers.lua, multimap, the map watcher), Docker Compose, CoreDNS
and certbot now say where that is written. Measurements already there stay
measurements ("date not recorded" where none was); hand-composed fixtures
say so.
Contradictions left for their own commits: C-P31 cleanup's size limit,
C-P42 master outside supervisor's signal, C-V5/V6 startsecs, C-V10,
C-S3/Q3 sasldb written in place, C-Q4/A1 certbot's symlinks, C-R7 rspamd
skips local clients but the signature routine does not, C-P8, C-R4, C-R12,
C-M7, C-E2, C-K8/K9, C-D1.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
c817f0833c |
from-header-binding: what the reviews had left as found, and address extensions
test / test (push) Canceled after 0s
The owner on the three things the reviews' commit left as found: can they be fixed? They can. - Downtime that crossed a UTC midnight was all booked on the day of the restart: it is cut at the midnights between (byDay). - A message with the null envelope sender - a bounce an application writes itself - left a refusal row without a domain, which no domain administrator would see: the row takes the domain the login is bound to. - A log read again after an unclean stop counted its deferrals again: while the tailer catches up, a warning no later than the last one counted is passed over. The mark is kept to the fraction of a second the log gives. And on the check being stricter than Postfix for an address with an extension (invoices+x@ passed in the envelope, was refused in the header): it makes Postfix's second try now, the address without its extension. recipient_delimiter was the distribution's default; it is set in postfix-config.sh, since the check depends on it. e2e sends one through. Test server, this tree: go vet ok, go test 23 packages ok, make e2e ok (339 s). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
89fd0a6116 |
from-header-binding: findings of the technical and security reviews
test / test (push) Canceled after 0s
Both reviews were of
|
||
|
mixandClaude Opus 5.5
|
c171fb5bc7 |
from-header-binding: the sender check, what it costs, its pages; guide, architecture, security
test / test (push) Canceled after 0s
A message's From: line is held against the application that sends it, under the rule Postfix holds the envelope sender to. OpenDKIM chooses the key by that line, so until now an application could have mail signed as another domain of the server or as the server itself. The check (internal/milter/sender.go) - A role of the panel on a socket of its own (SENDER_CHECK_SOCKET), first in smtpd_milters and strict: default_action=tempfail. The journal milter keeps its socket and stays fail-open. postfix-wrapper waits for the new socket. - It reads no database: what an application may send as comes from Postfix's own sender_login_maps, what the server signs for from OpenDKIM's SigningTable. Both are read again when they change; one that cannot be read defers mail. - One From: field, one address, allowed by the envelope's lookup; then no other name of the SigningTable may appear anywhere in the raw line. Refused: 550 5.7.1 naming the line, reduced to printable ASCII. - A refusal is a send-log row with reason "from" and the header address (migration 0006), written by another goroutine and not waited for. The journal's refusals record their reason too (limit, client), and the notifier takes only a limit's. What it costs (docs/plans/from-header-binding.md, Statistics) - The role marks itself alive every 2 s; at start the gap since the mark is downtime, counted from Postfix's start if later and not at all when supervisord says Postfix is not running. - The log tailer counts the connections Postfix turned away: a warning that names the socket, then milter-reject "Service unavailable" from the same smtpd. Seen on the stand: the client is refused from CONNECT on and leaves at AUTH (454), so no MAIL line is ever written. - sender_check_days, a row per UTC day, kept a year. Pages - Health: the card "Sender check", the socket's row, and the cards layout - boxes numbered by importance in two stacks read in rows; the left stack polls, the three readings of the right one are swapped in by id. - Outbound log: a refused row says why in its tag (wrong From, wrong client, rate-limited); the message's page shows the From: line and what the application may send as. - Help: topic "Sender check", word for word the mockup's. Found by the stand, fixed here: the names for the second look came from the sender bindings, and a domain with a key and no application yet was not among them. e2e: negative_journal_milter_fail_open is gone - it proved that mail passes with the panel down, which is no longer so. In its place sender_check_holds_the_from_line (another domain's From:, the hostname's, a stranger's, an address off the list, another sender in the display name - refused; own addresses - delivered) and panel_down_defers_mail (4xx with the panel stopped, the container alive, mail again after, downtime and one deferred message on Health, the card warning). Test server, this tree before the last cosmetic edits (a fixture row, a fact's size, docs): go vet ok, go test 23 packages ok, make e2e ok (337 s). Locally after them: internal/web/view ok. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
50fd6b859f |
panel-notifications: the notifier, its mail and the server's own DKIM key
internal/notify applies the owner's rules. Each subject has a row of state, so a thing is said once and a restart says nothing again: - DNS of a sending domain: said after two hourly checks in a row found a record wrong, said to be over after two found it right. A lookup that did not answer moves nothing; a warning (no DMARC record) is not a subject. - TLS certificate: at 14 days and at 3, per certificate. - Queue: a message older than three days, once; once more when none is. - Level-2 limit: from the rejected rows of the send log, every five minutes; at most once a day per domain and application. Global users are told everything, domain users about their domains; one message per recipient. With the instance switch off nothing is checked and no state moves. A message that could not be handed to Postfix is tried again at the next check. Mail leaves by sendmail(1) as postmaster@<hostname>, addresses after "--", no shell. For it to be believed the server's own name is signed like a sending domain: domain.Service keeps a key for it and a line in OpenDKIM's tables without a registry row, and non_smtpd_milters now names OpenDKIM. A sending domain of the same name shares its key with the server. dnscheck.ServerMail checks the name's DKIM and SPF records; postfix.QueueMessages reads postqueue -j for arrival times. The notifier is a sixth role of the panel process. Nothing in the panel shows or switches it yet. Checked on Windows: go vet clean; go test passes for notify, store, postfix, dnscheck, cmd, and domain apart from TestWriteLoadPrivateKeyRoundtrip, which fails there on file modes and always did. Not yet run in a container: whether the unprivileged panel may submit is for the e2e step. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
5f86457848 |
milter: the level-2 limit and the client IP list hold for every message
Security fix, outside the inbound antispam feature. Found by its
technical review (Opus, 2026-10-12), reproduced on the test stand
before the fix: over an application's level-2 limit, two MAIL FROM on
one connection were answered 451 and then accepted.
Cause. Postfix introduces a client to a milter once per connection.
The milter library (go-milter 0.4.1, session.go) replaces the milter's
session after any reply that is not "continue" - a refusal, or the
accept that used to end a message. The new session never saw Connect,
so it had no client address, and both checks passed a message without
one: overLimit returned early ("no client IP to key on") and
authIPAllowed did the same. So every message after the first on a
connection, and every MAIL FROM after a refused one, skipped the
level-2 limit and an application's client IP list. In the code since
1.9.0 for the list and longer for the limit.
Fix.
- build/postfix-config.sh: milter_mail_macros carries {client_addr},
so the address comes with every MAIL FROM; MailFrom reads it (both
spellings of IPv6) in the journal milter and the inbound journal
milter.
- overLimit no longer asks for a client address: a ceiling is on a
domain or an application.
- authIPAllowed refuses an application that has a client IP list when
no address is known.
- Body replies "continue" in both milters, which lets the message
through as "accept" did and keeps the session.
The inbound journal milter had the same cause with a smaller effect:
rows of a connection's later messages had no client address.
In the same file, the checks of INBOUND_ANTISPAM_MILTER and
INBOUND_JOURNAL_MILTER_SOCKET refuse any character outside their set
first: a glob's "*" matched anything after the first characters.
Tests: a session that never saw Connect is judged by the macro, a
listed and an unlisted address, no address, not an address; the limit
with no client address; the inbound milter answers only "continue".
test/e2e sends two MAIL FROM on one connection over the limit and
wants both refused.
Checked on the test server: e2e red before the fix on exactly that
check, green after; go vet ./... ok, go test ./... ok (22 packages).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
27fd355e53 |
inbound-antispam-panel: refused inbound mail from mail.log; retention
Step 4/12 of docs/plans/inbound-antispam-panel.md. The log tailer writes an inbound_spam_log row for mail port 25 refused (internal/logtail/inbound.go): a "reject:" line of the port-25 smtpd is Postfix's own policy; a milter-reject / milter-hold / milter-discard line of cleanup is the filter's verdict. Only a recipient at an inbound domain is a row, so "Relay access denied" for a stranger's domain is not. The row is dated by its log line; the reply text is cut to 255 bytes of printable ASCII; a reply starting with 4 is a tempfail. To tell port 25 from 465 / 587 the listener now logs as postfix/inbound (syslog_name). cleanup logs under one name for every listener, so its verdict counts only for a queue id the port-25 smtpd was seen to open (4096 remembered). Lines are matched from the head, after timestamp and host: their tail is the sender's own text. Retention: PruneInboundSpam every six hours - older than the inbound_spam_log_retention_days setting (seeded from INBOUND_SPAM_LOG_RETENTION_DAYS, 90, range 7-365), then down to 10 000 rows. The setting has no field in the panel yet. Known limits, in architecture.md: a log line names one recipient, so a message refused at end-of-message is one row; a line re-read after an unclean stop would be a second row. Checked on the test server, uncommitted tree: go vet ./... ok, go test ./... ok (22 packages), make e2e ok - the unknown recipient at the inbound domain refused on port 25 has its row (reject by postfix), the stranger's domain has none. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
28ec784ae2 |
inbound-antispam-panel: inbound journal milter on port 25
Step 3/12 of docs/plans/inbound-antispam-panel.md. The panel serves a second milter while the inbound relay is on (internal/milter/inbound.go, socket INBOUND_JOURNAL_MILTER_SOCKET, default /run/selfpost/inbound-journal.sock). build/postfix-config.sh puts it last on port 25, after the optional antispam milter, with default_action=accept; postfix-wrapper.sh waits for its socket. At end-of-message it writes one inbound_spam_log row per recipient at an inbound domain - other port-25 recipients (DMARC report addresses) get none - and always accepts. With a filter attached it reads the verdict from X-Rspamd-Action and X-Spamd-Result (action, score, up to six weighted symbols, only what the patterns recognise, 255 bytes); without one those headers are the sender's and are not read. The plan named X-Rspamd-Score, which rspamd does not have. The antispam compose fragment mounts rspamd/milter_headers.conf into the sidecar so that it adds the two headers (checked in rspamd 3.11: both routines exist and remove a sender's own headers of those names). Store: InsertInboundSpam, IsInboundDomain. Checked on the test server, uncommitted tree: go vet ./... ok, go test ./... ok (22 packages), make e2e ok - the relayed message of inbound_relay_delivers_and_refuses has its journal row (accept by selfpost) and the DMARC report sent through the same listener has none. Not yet seen in a real run: a verdict written by rspamd reaching this milter. The e2e stand has no filter, and the test server's only inbound domain has no upstream, so it accepts no mail. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
4dd46ea355 |
dmarc: a report is bounded, kept per domain, and ingested one at a time
Security review of the DMARC report path (Fable, 2026-10-11), which ran for the first time in 2.0.0. No Critical or High finding. Fixed: - Medium: a report was bounded only as 8 MiB of XML - some 160 000 records or one name of megabytes, all of it rows and table cells. At most 5 000 records (more is ErrRejected, dropped), text fields cut to 255 bytes on a character boundary, a record's count capped. - Medium: the cap of 500 reports was for the whole server, so a stranger filing under one domain's address evicted every other domain's reports. PruneDMARCReports counts per domain. - Low: the pipe service ran up to default_process_limit (100) commands at once against the panel's database; maxproc is 1. - Low: the reason logged for a dropped message carried the sender's bytes (header line, zip entry name) as they came; cut to 200 bytes and reduced to printable ASCII, zip entry names quoted. - Low: SELFPOST_DATA_DIR / SELFPOST_DB_PATH with whitespace or "$" would reach the command through export_environment as another path; refused at start when DMARC ingest is on. Left as they are, told to the owner: the parse-failure count is a lifetime figure shown under "This week"; a report larger than the command reads is dropped as unreadable; nested multipart is not searched. The hub's Retention line follows the design commit before this one. security.md: the review, and the accepted-risk entry says what a stranger can and cannot do now. The roadmap no longer calls the review pending. go vet ./cmd/... ./internal/dmarc/ ./internal/store/: ok go test ./cmd/... ./internal/dmarc/ ./internal/store/ ./internal/web/...: ok make e2e on the test server (with the port-25 scenarios of the next commit): ok Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
252e5d1cff |
dmarc-ingest: Postfix can run the command, and it is told the recipient
The first DMARC report to reach the test server (Google, 2026-10-11
09:41 UTC) was accepted on port 25 and then sat in the queue:
postfix/pipe: fatal: missing user= command-line attribute
postfix/qmgr: warning: private/dmarc-ingest socket: malformed response
Three things stood between an accepted report and the panel, all since
the feature shipped in 1.7.0 - no report had ever been delivered:
- The service was addressed as dmarc-ingest/unix-pipe. Its type is unix:
postconf -P answered "unmatched service_name/type" for flags=, user=
and argv= (the warnings in the container log at every start), which
are arguments of pipe(8) anyway and not -o parameters, and the service
stayed a bare "pipe". For the same reason postconf -MX never removed
it. It is dmarc-ingest/unix now, with the arguments in the service line.
- pipe(8) gives the command export_environment and nothing else, so the
command would have refused to run: it reads DMARC_REPORTS_ENABLE (and
the data directory, when it is not the default) from the environment.
Those are now named in export_environment.
- The command took the recipient from RECIPIENT, which local(8) sets and
pipe(8) does not. With no recipient the check that a report came to the
address of its own domain is skipped. It is now ${recipient} in argv,
one recipient per run.
When DMARC ingest is off the service and both parameters are removed.
e2e: every port-25 combination now asks Postfix for the service and the
two parameters (postconf -M / -h), and for their absence when ingest is
off - which is how the wrong type was found. make e2e on the test
server: ok. go test ./cmd/panel/ ./internal/dmarc/ ./internal/postfix/:
ok.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
36db4223f2 |
postfix-config: report addresses are relay recipients when the relay is on
Found by talking SMTP to port 25 of the test server once it answered again (2026-10-10): RCPT TO:<dmarc-reports+bs.mixdep.ru@selfpost.mixfed.ru> was refused with "550 5.1.1 User unknown in relay recipient table". With INBOUND_RELAY_ENABLE and DMARC_REPORTS_ENABLE both true the server's own name is a relay domain (for the reports) and relay_recipient_maps lists the relay's recipients only. smtpd_reject_unlisted_recipient applies after the restriction list, so the OK that check_recipient_access gives a report address does not help: every report was refused. The table of report addresses is added to relay_recipient_maps in that combination. Checked on the server by setting the parameter in the running container and reloading Postfix: the domain's report address is answered 250, the former server-wide mailbox and an unknown local part 550, a foreign domain and an inbound domain without recipients 554. e2e: the combined case requires relay_recipient_maps to name both tables. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
80748e6c94 |
postfix-config: no whitespace in the port-25 service's -o values
Seen in the System log of the test server (2026-10-10): on every
connection to port 25
postfix/smtpd: fatal: unexpected command-line argument:
texthash:/data/postfix/dmarc_recipients,reject_unauth_destination,...
postfix/master: warning: .../smtpd: bad command startup -- throttling
With DMARC_REPORTS_ENABLE=true the script wrote
-o smtpd_recipient_restrictions=check_recipient_access texthash:...,...
into master.cf. Master splits a service line on whitespace, so smtpd got
the option cut at the space plus a stray argument and died at start:
port 25 greeted nobody - no inbound relay, no DMARC reports. postconf -P
smtp/inet/smtpd_recipient_restrictions showed the cut value,
"check_recipient_access". The server's logs have it under the previous
image too (2026-10-09), so it is not from the redesign; postfix check
does not notice, and the e2e check compared the text of master.cf with
an expectation that had the space in it.
- The restriction list is written with commas only (Postfix splits it
on commas as well as whitespace).
- master_cf_set_smtp_inet_o stops the container on a value with
whitespace instead of writing it.
- e2e: for every option it checks, the port-25 case also asks
postconf -P and requires Postfix to read the same value.
Not fixed here: Postfix's start-time warnings "not owned by root" for
the queue directory and its pid/ - the entrypoint's recursive chown
again; harmless, logged at every start.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mix
|
7ef7f75246 |
release: 1.9.2: Review pass: port-25 milters, DMARC validation, rate-limit fix
Review pass over `1.4.0`…`1.9.1`: port 25 no longer shares the submission milter chain, DMARC reports are validated before they are stored, and the auto rate limit is correct for a non-default level-1 window. Schema migration `0010` (index only). Upgrading is a tag bump. Added: - SQLite migration `0010_send_log_app_login_index.sql` — - DMARC aggregate reports are accepted as **zip** as well as gzip or plain XML - e2e: `checkPort25ConfigCombinations` regenerates the Postfix configuration Changed: - README hero line and a **Positioning** block in `docs/product.md` record the Fixed: - The setup account's password is hashed at bcrypt cost `12` like every other - Login/setup rate limiter: protecting blocked buckets from eviction is now - `postqueue -p` output is bounded to 4 MiB (the timeout alone left the size of - [schema-migrations.md](docs/schema-migrations.md): the schema section was - postqueue reader is now time-bounded: `postqueue -p` runs under a 5-second … (11 more in CHANGELOG) Changed: - [roadmap.md](docs/roadmap.md) now carries everything the 2026-08-19 code - Extracted `internal/configsafe` — the empty-value and forbidden-character - Build, deploy and migration comments no longer cite the archived - Dropped the `parseDomainRateLimitForm` / `parseAppRateLimitForm` pass-through - Extracted shared helpers: `internal/atomicfile` (atomic temp-write+rename) and … (7 more in CHANGELOG) Removed: - Unused legacy asset `docs/assets/icon.png` (superseded by the four brand SVGs - Plan documents for already-shipped features: `domain-stats-auto-ratelimit`, Full detail: CHANGELOG.md (1.9.2). |
||
|
mix
|
967d3d95de |
release: 1.9.1: Port-25 Postfix startup with inbound/DMARC/antispam flags
Port-25 Postfix startup when inbound relay, DMARC ingest, or the inbound antispam milter are enabled. Schema-migration reference and roadmap plans for inbound antispam and quarantine. Upgrading from 1.9.0 is a tag bump; no migration. Added: - [docs/plans/inbound-antispam-panel.md](docs/plans/inbound-antispam-panel.md) — - [docs/plans/inbound-quarantine.md](docs/plans/inbound-quarantine.md) — candidate - [docs/schema-migrations.md](docs/schema-migrations.md) — living reference for the Changed: - [docs/roadmap.md](docs/roadmap.md) — `inbound-antispam-panel` (agreed, 1/12) - [docs/development.md](docs/development.md) — plan checklists may override - [docs/development.md](docs/development.md), [docs/roadmap.md](docs/roadmap.md), Fixed: - `build/postfix-config.sh`: enabling inbound relay, DMARC ingest, and/or the Full detail: CHANGELOG.md (1.9.1). |
||
|
mix
|
20d88e1d9c |
release: 1.7.0: DMARC aggregate report ingest and panel summaries
Optional DMARC aggregate report ingest: accept `rua=` mail on port 25, parse gzip/XML into SQLite, and show summaries in the panel. Added: - Optional DMARC aggregate report ingest (`DMARC_REPORTS_ENABLE`): port 25 - Per-domain **SelfPost hosted** `rua=` mode when ingest is enabled Full detail: CHANGELOG.md (1.7.0). |
||
|
mix
|
656c4d4d7f |
release: 1.4.0: Optional inbound relay (backup-MX) on port 25
Optional inbound relay (backup-MX / forwarder) on port 25, off by default. Mail is accepted only for domains configured in the panel and forwarded to an upstream; there are still no mailboxes. A dedicated security review of the inbound path is still open on the plan (Fable). Added: - `INBOUND_RELAY_ENABLE` (default `false`): when true, Postfix listens on - Panel **Inbound** pages (global administrator): domains, upstream host/port - Optional `INBOUND_ANTISPAM_MILTER` on the inbound listener only, plus - Inbound rate limit (`INBOUND_RATE_LIMIT_MESSAGES_PER_IP`, default 20) and Changed: - Compose publishes host port 25 even when the flag is off (nothing listens - Full-backup restore Resync also rebuilds inbound maps when the flag is on. Full detail: CHANGELOG.md (1.4.0). |
||
|
mix
|
0730b2090e |
release: 1.3.0: 1.3.0-1.3.1: security pass, queue persist, full backup layout
[1.3.0] Security and quality after 1.2.5: domain-admin send-log authorization, fail-closed sign-in and application delete, level-2 rate-limit race fix, restore Resync, expanded tests, operator docs, release CI, and OFL for IBM Plex. Upgrading from 1.2.x is a tag bump; no migration. Added: - licence: the SIL Open Font License 1.1 text now travels with the IBM Plex - docs: agreed roadmap item **queue-retries** — show this Postfix's retry Security: - The independent security review of the send-log authorization and Fixed: - test (e2e): send-log status scrapers follow the badge markup in - security (panel): the Deliveries list is scoped to a domain administrator's - mail (level-2 rate limit): the ceiling is no longer overshot by messages that - panel (sign-in): a session that cannot be written to the database no longer - panel (applications): deleting an application removes its SASL credentials … (2 more in CHANGELOG) Changed: - docs: operator and as-built docs aligned with the code after a full - docs: [guide.md](docs/guide.md) reorganised into **Installation**, **Instance - docs: the 2026-08-13 full-tree review plan is complete — every phase (P0–P7) - licence: [NOTICE](NOTICE) tells modifiers to update `SourceURL` in - ci: the release image is published only for a **published** GitHub Release … (9 more in CHANGELOG) [1.3.1] Retry policy in the panel, persistent Postfix queue, and self-contained full backups. Mail queue and delivery history show this Postfix's first retry, backoff cap, and queue lifetime. Deferred mail survives container recreate. Full backups now archive `data/`, compose, `.env`, and `certs/`; the archive layout breaks 1.3.0 flat backups (unpack those with `tar xzf backup.tar.gz -C ./data` as before). Upgrading from 1.3.0 is a tag bump; no schema migration. Added: - Mail queue and a delivery's history show this Postfix's retry policy - docs: **Plan checklists** in [development.md](docs/development.md) — format, - docs: **Implementation checklists** with model routing in - docs: roadmap candidates **send-log-retention** (panel Settings for delivery - Postfix queue under `/data/postfix/queue` — deferred and active mail survive … (1 more in CHANGELOG) Changed: - **Breaking:** full-backup archive layout — paths are prefixed with `data/`; - docs: operator guide, architecture, security, and backup UI updated for - docs: HTML mockups for a full panel UI refresh Changed: - docs: panel UI mockups after review — Status restored to live readings - docs: panel UI design system and mockups rebuilt as separate pages - docs: panel UI mockups — add-domain sits in the list card (Domains and Fixed: - ci (GHCR): per-arch package tags (`X.Y.Z-amd64`, `X.Y.Z-arm64`) are dropped Squashed CHANGELOG sections: [1.3.0], [1.3.1]. Full detail: CHANGELOG.md (1.3.0, 1.3.1). |
||
|
mix
|
75207f0d1e |
release: 1.0.0: Public 1.0 image; delivery log; docs and SECURITY.md (incl. 1.0.1)
[1.0.0]
Added:
- A **Delivery log** on each delivery's page (`/deliveries/{id}`): the
- A **History** block on the same page: the journal's two timestamps stated as
Fixed:
- Postfix config: copy TLS cert/key from the (often `:ro`, host-owned) mount
- Postfix config: allow `maillog_file` under `/data` via
- E2e: read `/data/setup-token` via `docker compose exec` (file is `0600`
- Entrypoint: check `SELFPOST_HOSTNAME` before `/data` setup (so a bad identity
- E2e gate: wait for host-published `/healthz` before panel setup, and stop
… (3 more in CHANGELOG)
Changed:
- Document what `.spbk` and `.spde` stand for (SelfPost backup / SelfPost domain
- Docs aligned with the code: setup URL is `/setup/<token>` (README and
- Full backups no longer carry `/data/log`. It is Postfix's raw log plus its
- Monitoring screens (status, mail queue, system log, deliveries) use adaptive
- Documentation package consolidated into `docs/development.md`: Documentation
… (4 more in CHANGELOG)
[1.0.1]
A documentation and packaging release: no change to the mail path, the database, or the on-disk layout. Upgrading is a tag bump.
Added:
- `SECURITY.md` — how to report a vulnerability privately (GitHub private
- [docs/plans/](docs/plans/) — one document per agreed extension: the optional
Changed:
- The panel's **Account** entry is now called **Settings** — nav link, page
- The signed-in name in the panel's nav is now labelled `User:`, so it reads as
- [docs/product.md](docs/product.md) reframes the future line: the inbound
- [docs/security.md](docs/security.md) is now in English, matching the rest of
- The README documentation table now points at `SECURITY.md` for reporting a
… (2 more in CHANGELOG)
Fixed:
- The panel's static assets are served with a content ETag and
Squashed CHANGELOG sections: [1.0.0], [1.0.1].
Full detail: CHANGELOG.md (1.0.0, 1.0.1).
|
||
|
mix
|
5e5d157496 |
release: 0.5.0: Pre-1.0 security review, domain-admin role, doc consolidation
A bounce could be recorded as a successful delivery. The log-tailer's Fixed: - A bounce could be recorded as a successful delivery. The log-tailer's - Log-tailer resumes where it stopped instead of jumping to end-of-file on - Level-2 rate limit no longer overshoots under concurrency: messages that Changed: - The project has a single public home: `github.com/mixeme/selfpost`. Codeberg - Code comments no longer cite the archived specification. References like - `docs/code-review.md` is gone. Its plan is finished — phases 0 (bar the - `docs/architecture.md` gained a *Code layers* section: a diagram of - Phase 1 doc/code hygiene (`docs/code-review.md`): removed ~30 stale … (1 more in CHANGELOG) Security: - Pre-release security review (plan § D, model Fable, 2026-08-06): full pass - `saslpasswd2` argv: the application login is now passed after a `--` Added: - Optional password encryption for the two secret-bearing downloads (plan - Domain import accepts an encrypted export: the envelope is detected by its - `selfpost-backup` writes encrypted archives and reads them back: - `TestParseDelivery` covers the exotic mail.log shapes the review asked for - docs: README *Encrypting a backup or export*; `docs/security.md` § … (14 more in CHANGELOG) Removed: - docs: `security.md` — accepted risk «restore old backup revives session rows» Changed: - docs: `implementation-plan.md` trimmed to the sole open v1.x gate — pre-release - docs: `architecture.md` — sessions (SQLite, idle renew, password change), - docs: `development.md` — expanded e2e stack and `release.yml` matrix workflow. - docs: `security.md` — accepted risk for send-log rows stuck at `queued` after - docs: `roadmap.md` — optional send-log / `mail.log` follow-ups under v1.x tail. … (10 more in CHANGELOG) Full detail: CHANGELOG.md (0.5.0). |
||
|
mix
|
8ce050ef7f |
release: 0.1.0: Phases 0-11: panel, Postfix/DKIM, milter, backup, Docker image
Initial feature-complete implementation of the v1.0 specification (phases 0-11 of `docs/implementation-plan.md`). Added: - Panel (Go, single static binary) with SQLite persistence, one-time - Domain management with per-domain DKIM (RSA-2048, generated in pure Go) and - Application (sender identity) management: SASL credentials via `sasldb2`, - Full Postfix relay config generated from env at container start: SMTPS 465, - Journal milter (pure Go, `go-milter`) recording every send to `send_log`; … (6 more in CHANGELOG) Full detail: CHANGELOG.md (0.1.0). |