3584adcbc2bce663f4e662dcf5c1cbc0c6f49dca
24
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  mixandClaude Opus 5.5
|
3584adcbc2 |
sender check: From: read with OpenDKIM's own parser; L8 closed
test / test (push) Canceled after 0s
Audit 2026-10-12, stage 2c, the owner's decision of 2026-10-14: the check
decides by the address OpenDKIM signs for, whatever a display name or a
comment holds.
internal/milter/mailparse.go ports libopendkim's dkim_mail_parse() with
dkim_mail_first_special(), dkim_mail_token() and
dkim_mail_matching_paren() from Debian's opendkim 2.11.0~beta2-8+deb12u1,
line for line: the '<' form, group and list punctuation, an '@' before the
first ':', ';' or ',' deciding where the address starts, source routes
dropped, quoted strings and domain literals kept with their delimiters,
comments skipped, whitespace between atoms one space, no encoded word
decoded; and the C's own quirks ("@d" gives d as the local part too).
testdata/mailparse_harness.c compiles the C from the image's source; the
test feeds it and the port 200 019 lines (the hand-written cases and
200 000 random ones over the specials) - 93 443 parse and agree byte for
byte, 106 576 fail and agree on the error (on an error the C leaves its
in-place result unterminated, and OpenDKIM uses neither part then).
judge(): one From: field and one address stay required (moreAfter: only
list or group punctuation may follow); what OpenDKIM cannot read is
refused (mlfi_eoh() would not sign it); the address is lower-cased in
ASCII only, as dkimf_lowercase() and Postfix's tables do. Found reading
dkimf_apply_signtable(): OpenDKIM matches its refile SigningTable against
"user@domain" printed into MAXADDRESS + 1 = 257 bytes, so a longer address
is matched cut short - a quoted local part padded to end there in
"@another.tenant" would be signed with that tenant's key while its real
domain is the application's. Such an address (over 256 bytes) is refused;
one that fits is matched whole. The display-name and comment scan, the
"one @ outside quotes" rule and the SigningTable reader (Signers) go; the
check asks for header values with their leading space as OpenDKIM does
(OptHeaderLeadingSpace; Postfix keeps a v2 milter's event mask, milter8.c
milter8_negotiate()).
L8 closed: refused or passed no longer depends on other domains of the
server; security.md's accepted risk is struck. The shared other-sender
lines are now held to "never signed for the other sender": unit test (a
passed line is read at the application's domain) and e2e (a passed line
arrives signed for the application's domain, none for the other).
Documents: architecture "How the header is read", security's sender
check paragraph, the guide; the help topic per
|
||
|
mixandClaude Opus 5.5
|
cad1182150 |
audit 2c: what only the stand could answer, measured and written down
test / test (push) Canceled after 0s
All 2026-10-15; each written beside the code or text it settles. - A-43: /usr/sbin/postlog is -rwxr-xr-x root:root in the image (postfix 3.7.11-0+deb12u1; dpkg-statoverride lists postdrop and postqueue only): Debian does not install it set-gid, so it is no use to dmarc-ingest (cmd/panel/dmarc_ingest.go). - C-X1: OpenSSL 3.0.22 in the image prints the same public key from `x509 -pubkey` and `pkey -pubout` for RSA-2048, P-256, P-384 and a SEC1 P-256 key - cert-reload's same_pair holds for certbot's ECDSA keys. - C-K5, D-guide:933/:233: on the live server (Docker 29.6.1, userland proxy on 0.0.0.0 and ::, no IPv6 on the network) an outside IPv4 client and the host's own public IPv4 address are logged as themselves; the host's IPv6 address and 127.0.0.1 arrive as 172.18.0.1. Over IPv6 every client is the gateway: one level-1 budget, an application IP list cannot name them, rspamd sees the gateway. Guide paragraph under level 1, notes at the milter and allow-list, comments at the anvil setup and authip.go, and a Security entry in the CHANGELOG (an allow-list naming the gateway would admit every IPv6 client). - D-guide:61: a published port nothing listens on (a throwaway container, -p 20999:25) is refused from outside over IPv4 and from the host's public IPv4, accepted and closed through 127.0.0.1 - Docker's proxy, which IPv6 goes through too (not probed over IPv6 for this). - C-M8: the live installation has received one DMARC report, of one record: nothing to set maxReportRecords by yet - said at the constant. - D-S7, D-arch:516, D-arch:532: a new database filled through the store to 120 days at 1 900 messages a day (228 000 messages, 1.37 million lines, 464 MB) on the test server (2 cores): the longest write is the line prune after a 30-day gap, 1.9 s for 342 000 lines (0.4 s with nothing to delete); the send-log delete 0.6 s; 2 000 lines of a tailer pass 18 ms; VACUUM INTO 1.7 s; a second connection writing every 50 ms waited 1.8 s at most, no SQLITE_BUSY - inside busy_timeout's 5 s. architecture.md's "about a second per million lines" was five times too fast; its "six to ten lines of 200 bytes" is 6.0 lines of 146 bytes on the live data. - D-B16: which favicon is fetched, by the probe server's log: Edge 155 the SVG, the desktop app's embedded Chromium 152 the PNG, with or without sizes="any" - layout.html's "vector wins where supported, raster catches the rest" holds; Firefox and Safari not measured. - D-arch:121: the allow/deny trial again, in rspamd/rspamd:3.11.1-3 with today's multimap.conf: every mix of allow and deny entries matching one message ended reject; a changed map was used about 10 s later. - D-sec:424: rspamd runs as _rspamd, uid 11333; the panel is uid 999. Stand: go vet and go test ./... pass on the server (24 packages); make e2e exit 0. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
fbd0acd035 |
audit 2c: the rest the sources contradict, and the documents
test / test (push) Canceled after 0s
Code and config: - C-M7: a DMARC report's explicit <pct>0</pct> stays 0; only an absent pct takes RFC 7489 § 6.3's default 100 (Pct *int). - C-D1: docs/development.md now tables the Debian versions the citations were read at (postfix 3.7.11-0+deb12u1, opendkim and libopendkim11 2.11.0~beta2-8+deb12u1, libmilter1.0.1 8.17.1.9-2+deb12u2, libsasl2-2 and sasl2-bin 2.1.28+dfsg-10, supervisor 4.2.5-1, logrotate 3.21.0-1 - read off the image with dpkg-query, 2026-10-15); the e2e stand's new checkCitedPackageVersions fails when the image it built differs. - C-E2: the e2e zone's SOA serial only grows (CoreDNS v1.14.6's file plugin reloads on a grown serial, not on mtime); Corefile comment says so; TestZoneSerialGrows. - C-K8, C-K9: the e2e compose and stage comments say how --project-directory and .env resolve. - D-arch:154: postfix-config.sh's "Postfix insists" comment says what TLS_README advises and that smtpd reads the key as root. - B-G7: inflight.go's reservationTTL comment: a dropped client does give ABORT (smtpd_proto() -> mail_reset() -> milter_abort()); the TTL is for smtpd dying or the milter connection breaking. - D-guide:301: the nginx fragment's first-certificate command now reaches certbot (--entrypoint certbot, --standalone, port 80 free), and the renewal loop passes --webroot -w /var/www/certbot - a standalone certificate would otherwise renew standalone while nginx holds port 80 (certbot docs, "Renewing certificates": the issuing plugin is used "unless you specify other plugins or options", and options of a successful renewal are saved). The register's proposal missed that. Documents: every D-arch, D-guide and D-sec claim the register's Answers E found false or partly true, rewritten - by three Sonnet agents, one per document, then reviewed: two proposals were obsolete after this stage's fixes and not used (a bounce's From: line - extract_from = "smtp" now; "Origin: null" - Referrer-Policy is same-origin now); a stand observation the agent had dated from a commit is now tied to the e2e test that checks it; the SQLite writers paragraph describes _txlock=immediate; the log tailer's rotation paragraph describes the minute's grace; the guide's nginx steps were put in working order (links and modes before `up`, no reconfigure step). "Deferred" is kept for Postfix's queue in the guide too. guide.md's CRLF from the agent normalised. Stand (2026-10-15, make e2e, exit 0, the version gate and zone serial test included); go vet and go test ./... pass on the server (24 packages). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
31c2b50457 |
antispam: rspamd strips a sender's own verdict for every client
test / test (push) Canceled after 0s
rspamd 3.11.1's milter_headers skips its verdict routines - removes none of the sender's X-Spamd-Result / X-Rspamd-Action, adds none - for a client it counts as local (loopback, a unix socket, local_addrs: the private ranges) or one that authenticated (skip_local, skip_authenticated, both on by default; milter_headers.lua skip_wanted(), lua_ip.c lua_ip_is_local()). The custom routine that signs X-SelfPost-Filter is never put through skip_wanted(), so it signed the sender's own verdict, and Inbound > Log showed it as rspamd's. Every sender is private when Docker's proxy relays port 25 from the bridge gateway. Both options set to false. Tried 2026-10-14 in a throwaway rspamd/rspamd:3.11.1-3 on the test server (rspamc --ucl, a message carrying its own verdict headers): old config, from 10.0.0.5 and as an authenticated user, the milter reply removed and added neither and added the signature; new config, both removed and rspamd's own added, as from 203.0.113.9. Also: the sender rules take the envelope only (extract_from = "smtp"; by default a bounce's From: header is used - tried: a bounce whose From: domain is denied was refused before, is not now; a denied sender is refused either way); the image pinned to 3.11.1-3, the build read (3.11 and 3.11.1 move with each rebuild); the prefilter lines no longer read go. architecture.md and security.md say so. Assumptions C-R7, B-R1, C-R4, C-R12, C-R5. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
57142b21b5 |
security: L8's remaining probe accepted by the owner
test / test (push) Canceled after 0s
Owner, 2026-10-14, asked whether to refuse every foreign address in a display name to close what L8 leaves (refused or passed still tells an application which domains are hosted here): "Ответ 1" - leave it. The probe is a trusted application of this server guessing names one at a time, as it already had to before L8, when the reply said in words what the line itself had named. security.md (Mail path and accepted risks, with the trigger to revisit: untrusted tenants, or the display-name rule decided anew) and the audit plan record it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
ef18ef21a0 |
findings of the reviews of audit stage 2
test / test (push) Canceled after 0s
Technical review (Opus) and security review (Fable) of a59e3d4..cb5a4a2;
reports in the session's scratchpad. Nothing critical, high or medium; no
outright bug. Fixed:
- F2, F3 (0008 backfill, before it runs on the live database): rows are
filled by the rule new rows follow - the application's domain, then the
name's - and only by a domain and application that existed when the row
was written (created_at); the inbound log likewise. Test: the migration's
UPDATEs re-run on prepared rows (before the domain, after, null sender,
application gone, a stranger's name). Dry run on a copy of the live
database: 68/68 and 10/10 rows filled, none disagreeing with its login's
domain, integrity ok.
- V2, F4: an application's statistics and level-2 count are its login's
rows of its domain (appByLogin), and StatsWindow starts no earlier than
the entity's creation; the message page's "may send as" only for a login
still of the row's domain. Test: a login taken again in another domain
starts at zero.
- F7: MAIL FROM:<> is held to the domain limit of its login
(ApplicationByLogin fills DomainName).
- V3: an imported DKIM selector is held to DNS labels (validate.Selector).
- F5, F6: an imported auto limit's numbers are dropped and recalculated
right after the import; its mode is stored trimmed.
- V6: the store refuses a role that is neither global nor domain.
- F9: SaveUser keeps the stored hash when no new password is given (the
form no longer writes back the hash it read). F10: a reach naming a
domain deleted meanwhile is ErrNoSuchDomain, answered on the form.
- V4, F12: from-lines-other.txt - lines naming another sender ({other}) in
a quoted string, a quoted pair, capitals, a comment, an encoded word, a
quoted local part; the unit test wants each refused, the e2e
(lines_naming_another_sender_never_signed_for_it) wants each refused and
none signed for it. The passed list gained a.{DOMAIN}, a comment after
the angle address, a quoted local part, and "b@ {other}" - passed by
design (security.md), and the e2e shows it signed for the own domain.
- F13: e2e login_in_other_capitals_does_not_authenticate - AUTH with the
login upper-cased gets 535.
Not changed, written down: V1/F1 - L8 is half closed (refused or passed
still tells an application which domains are hosted here); security.md's
accepted risks and the CHANGELOG say so, and the owner is asked whether to
refuse every foreign address in a display name (changes the 2.4.0 rule).
F11 - deleting a domain rewrites its rows' domain_id (seconds at 1e5 rows),
accepted at this size. F8 (test cannot tell write-first from read-first;
the reviewer verified it with two stores, 30/30), V5, V7, P2: noted.
Evidence on the test server for this tree: go vet clean, go test ./... 23
packages ok, make e2e exit 0 with the three new cases.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
cb5a4a22e1 |
docs: stage 2 of the audit - roles, the guard, logs by id, import, logins
test / test (push) Canceled after 0s
security.md - § Roles: the last-global guard is inside the transaction that deletes or demotes (write, then count); setup is one statement; a user is saved in one transaction. A log row, outbound or inbound, belongs to a domain by id; a domain added again starts with an empty log. The Inbound › Log row of the table says by id. - § Mail path, sender check: the agreement of the check and OpenDKIM is tested (the shared list of passed From: lines); the refusal does not say which other sender a line names. - Accepted risks: "a row of the inbound log belongs to a domain by name" struck (L12). guide.md - Domain export and import: the file is checked like the forms before anything is created; a login keeps its case and a case clash is refused. - The application form: a new login is stored in lower case. schema-migrations.md was updated with 0008 in its commits. Audit plan line ticked; stage 2's lines are all done. Roadmap 22/62. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
c3d99b1f15 |
roadmap: decisions of 2026-10-13 on the candidates
test / test (push) Canceled after 0s
Agreed with the owner, one question at a time; documents only, no code. - csrf-tokens -> origin-strict (agreed): no tokens, the origin check refuses a request with neither header. security.md's ADR records the decision and when tokens are built after all. - structured-logging, contributing: dropped, each with what brings it back (new roadmap section "Dropped, with the condition for return"). - template-data-typing: done by 2.0.0; its last map (healthChecks) is a step of the audit's stage 4. - preflight -> health-setup-checks (certificate name, Postfix's greeting, trusted proxy as lines on Health) and test-email, both agreed. The port check is dropped with its reason; plans/preflight.md removed. - password-reset: agreed; a reset link goes only to a confirmed e-mail, so the item builds confirmation first. - phone-desktop-mode: agreed, after stages 1 and 2 of the audit. - backup-reauth (agreed): the account password before a backup or a domain export, out of review-2026-08-followups. - from-header-binding, Not done: the Delivery log box is required on a refused message's page, with the line Postfix wrote, for all three kinds of refusal (audit stage 1); the Outbound log gets a filter by status and by day (audit stage 4). The audit's checklist is 48 lines (was 45). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
8f226bd82f |
release: 2.4.0: an application signs only as itself
test / test (push) Canceled after 0s
from-header-binding (docs/plans/from-header-binding.md, 9/9), at the owner's
word (2026-10-12, "Да").
- A message's From: line is held to what its envelope sender is held to:
any address of the application's domain, or the addresses of its list,
with or without a +extension. Anything else is refused with 550 5.7.1 -
another registered domain, the server's own name, a domain this server
does not sign for. Until now an application could have mail signed with
another domain's key by writing that domain into From:.
- The check is the panel's, first in the milter chain and strict: while
the panel does not answer, Postfix defers mail.
- Server > Health counts what that costs - the panel's downtime under a
running Postfix and the submissions turned away - and is laid out anew,
boxes numbered by importance.
- A refused row of the Outbound log says why in its tag.
- Migration 0006.
Upgrading: mail whose From: is not the application's own stops being
accepted - another of your domains, an address off an application's list, a
visitor's address a form puts there. The guide says what to do about each.
A stopped panel now stops submission.
Not done, written into the plan at the owner's word: the Delivery log box on
a refused message's page, the log's status filter, "messages" that are
connections, and what was reasoned about rather than run - OpenDKIM's own
parser above all.
Cut: CHANGELOG 2.4.0 written (nothing had been put under [Unreleased]
while building); image pin 2.4.0 in compose, README, guide; version table,
roadmap, plan status. security.md: a malformed packet on a milter socket,
as an accepted risk. No tag: the owner tags when he decides to, so there is
no image of this version until then.
On the test server, on
|
||
|
mixandClaude Opus 5.5
|
89fd0a6116 |
from-header-binding: findings of the technical and security reviews
test / test (push) Canceled after 0s
Both reviews were of
|
||
|
mixandClaude Opus 5.5
|
c171fb5bc7 |
from-header-binding: the sender check, what it costs, its pages; guide, architecture, security
test / test (push) Canceled after 0s
A message's From: line is held against the application that sends it, under the rule Postfix holds the envelope sender to. OpenDKIM chooses the key by that line, so until now an application could have mail signed as another domain of the server or as the server itself. The check (internal/milter/sender.go) - A role of the panel on a socket of its own (SENDER_CHECK_SOCKET), first in smtpd_milters and strict: default_action=tempfail. The journal milter keeps its socket and stays fail-open. postfix-wrapper waits for the new socket. - It reads no database: what an application may send as comes from Postfix's own sender_login_maps, what the server signs for from OpenDKIM's SigningTable. Both are read again when they change; one that cannot be read defers mail. - One From: field, one address, allowed by the envelope's lookup; then no other name of the SigningTable may appear anywhere in the raw line. Refused: 550 5.7.1 naming the line, reduced to printable ASCII. - A refusal is a send-log row with reason "from" and the header address (migration 0006), written by another goroutine and not waited for. The journal's refusals record their reason too (limit, client), and the notifier takes only a limit's. What it costs (docs/plans/from-header-binding.md, Statistics) - The role marks itself alive every 2 s; at start the gap since the mark is downtime, counted from Postfix's start if later and not at all when supervisord says Postfix is not running. - The log tailer counts the connections Postfix turned away: a warning that names the socket, then milter-reject "Service unavailable" from the same smtpd. Seen on the stand: the client is refused from CONNECT on and leaves at AUTH (454), so no MAIL line is ever written. - sender_check_days, a row per UTC day, kept a year. Pages - Health: the card "Sender check", the socket's row, and the cards layout - boxes numbered by importance in two stacks read in rows; the left stack polls, the three readings of the right one are swapped in by id. - Outbound log: a refused row says why in its tag (wrong From, wrong client, rate-limited); the message's page shows the From: line and what the application may send as. - Help: topic "Sender check", word for word the mockup's. Found by the stand, fixed here: the names for the second look came from the sender bindings, and a domain with a key and no application yet was not among them. e2e: negative_journal_milter_fail_open is gone - it proved that mail passes with the panel down, which is no longer so. In its place sender_check_holds_the_from_line (another domain's From:, the hostname's, a stranger's, an address off the list, another sender in the display name - refused; own addresses - delivered) and panel_down_defers_mail (4xx with the panel stopped, the container alive, mail again after, downtime and one deferred message on Health, the card warning). Test server, this tree before the last cosmetic edits (a fixture row, a fact's size, docs): go vet ok, go test 23 packages ok, make e2e ok (337 s). Locally after them: internal/web/view ok. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
f09b60aaa2 |
panel-notifications: findings of the technical and security reviews
test / test (push) Canceled after 0s
Neither review (read-only agents, Opus and Fable, over 972a9f8..400aa76) has a Critical finding. Both found the same serious one, and more: - The notification about refused mail was built on what a rejected row says of itself. Its domain is the one in MAIL FROM, which the client typed and Postfix has not yet held against the login when the milter refuses: an application over its limit could have had the panel write a message per made-up domain, to another tenant's users among others. And the same status is written when an application is refused for its client address, which is no limit. Refusals are now counted by the domain the login is registered under, only for logins that exist and only while a limit is set on the login or its domain; one subject per sending domain. They are read through a partial index of their own (migration 0005): the query walked the whole send log every minute. - Account and user e-mails were checked with the DMARC report validator, which refuses Gmail and the like - the owner's own kind of address. A new validate.AccountEmail accepts them and refuses a local part beginning "-". - "Said" now means sent: what arises while nobody can be told, or while Postfix does not take the message, is told at a later check. Its ending with nobody left to tell is simply over. - Two DNS checks must be 45 minutes apart as well as two: the last check before a restart and the first after it were minutes apart. - The notifier's own mail waiting in the queue, and its bounce coming back to postmaster@ this server, are not the queue's subject. A listing cut at its size limit or with a line too long to read is no listing; postqueue -j gets 30 seconds. - The tables must name the selector the panel shows, not only have the line. - An a/mx lookup that did not answer inside the SPF check made the record "not authorising"; it is "cannot tell" now, for the pages too. - A ceiling of 60 messages an hour; a pass stops between domains when the process is asked to stop; sendmail gets a WaitDelay; days are rounded as a person counts; a failed read of the switch shows it on, not off. Recorded as accepted in security.md, with a roadmap candidate (from-header-binding): an application can have a message signed as the server's own name - or, as always, as another registered domain - by writing it into the From: header, which nothing holds against the login. Left as found: a recipient whose copy failed while another's went out is not tried again; a certificate that lives under 14 days is reported at each renewal. On the test server, for this tree: go vet clean, go test ./... 23 packages ok, make e2e ok (326 s). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
c9027381e5 |
panel-notifications: guide, architecture, security; refusals looked for every minute
guide.md gains Notifications: the four things, when each is said and said again, who is told, the two switches, and the two DNS records of the server's own name that make the mail arrive. architecture.md: the notifier as the fifth role, its readings, state, recipients and sending; the server's own key in OpenDKIM's tables; non_smtpd_milters. security.md: the panel submits mail of its own - how, to whom, and what text from outside can reach a body. That text - a queued message's sender, a DNS finding - is reduced to printable ASCII and cut before it is printed. Refused mail is looked for every minute instead of every five: it is one indexed query, and a refusal is mail not being sent now. The image's note on the panel's postdrop membership no longer calls it read-side only. go test ./internal/notify passes. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
a990e7cc23 |
delivery-log-storage: findings of the technical and security reviews
test / test (push) Canceled after 0s
Neither review (read-only agents, Opus and Fable, over ae06d8b..815236a) has a Critical or High finding. What they found and what was done: - A stranger on port 25 could grow the table: every queue-id line of inbound mail was stored and pruned an hour or more later, his own message-id among them. The tailer now leaves out the lines of a queue id that postfix/inbound/smtpd opened, until qmgr removes the message or another listener opens one under the id; 4096 such ids are remembered. - A commit, so a disk sync, per stored line on the connection the journal milter shares, and a backlog written line by line. Lines are now written in one transaction per pass over the log, 500 at most, before the read offset is saved (InsertSendLogLines; follow() calls the keeper's flush). - The prune asked the send log once per line and ran hourly. It asks once per queue id and runs at start and with the six-hourly sweep; with port-25 mail left out there is little without a row to wait for. - The 4096-byte cut could split a character; it keeps characters whole. - security.md did not say that a backup now carries these lines, and the plan said the time window excludes a reused queue id where it only limits the chance to the row's queue lifetime. Both are corrected; the collision is recorded as an accepted risk with its trigger. - Tests that did not prove their comments: the prune is now tested with the sweep, a rejected row next to the prune, batching and the change from catching up to following, port-25 mail left out and its id reused. Left as found and written down in the plan: lines the tailer never reads (a file rotated away while the panel was down), and a message in the queue across the upgrade, which shows only its later lines. On the test server, for this tree: go vet clean, go test ./... 22 packages ok, make e2e ok. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
d398f488e2 |
inbound-antispam-panel: the filter signs what it judged
test / test (push) Canceled after 0s
Closes what the security review left as an accepted risk: with the
spam filter down - it is attached fail-open - nothing removes verdict
headers a sender wrote himself, and the inbound journal recorded his
verdict as the filter's. The owner asked whether rspamd could add a
header that proves the others are ours (2026-10-12) and agreed to a
signature: a fixed mark could be written by a sender as easily as the
verdict.
- inbound.FilterKey: a key of 32 random bytes, 64 hex characters, in
/data/antispam/filter.key, made on the first start with the relay
on. 0644 like the list files beside it: the filter is another user
in another container.
- deploy/antispam/rspamd/milter_headers.conf: a custom routine reads
the key through the directory the sidecar already mounts and adds
X-SelfPost-Filter, the HMAC-SHA256 of the message's queue id, hex;
a header of that name from the sender is removed.
- internal/milter/inbound.go: the verdict headers are kept as they
are read, and at end-of-message - when the queue id is known - they
count only if the signature fits (FilterSignature, hmac.Equal). No
key, no queue id, no signature or a wrong one: the row is that of
mail nobody judged (accept, selfpost, no detail).
The signature goes on to the upstream with the mail and is of no use
there: it fits one queue id.
Tried in a throwaway rspamd 3.11 container on the test server before
the Go side was written: the routine loads, signs
(2aa1ca6d... for key 0123...cdef and queue id 4A1B2C3D5E, the value
python's hmac gives and TestFilterSignatureIsWhatTheFilterWrites
pins), removes a sender's header of the same name, and adds nothing
without a queue id.
Tests: signed, unsigned, made-up, another message's, another key's,
the sender's followed by the real one, the next message on the
connection, no queue id; the key made once, read after, replaced when
damaged, left alone by the lists. e2e: filter.key is there, 644, 65
bytes.
docs/security.md: the accepted risk is replaced by a narrower one (the
key is readable on the host); Mail path describes the signature.
Checked on the test server, uncommitted tree: go vet ./... ok,
go test ./... ok (22 packages), make e2e ok.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
c731a98a0f |
inbound-antispam-panel: findings of the technical and security reviews
test / test (push) Canceled after 0s
Steps 11 and 12 of docs/plans/inbound-antispam-panel.md: 12/12. Two
read-only reviews of d65d632..HEAD by different models (Opus,
technical; Fable, security), each given the code and questions, not
conclusions. Nothing Critical or High in the feature; the High the
technical review found outside it is the commit before this one.
Log tailer (internal/logtail/inbound.go):
- the reply of a refusal ends at the first "; from=<", Postfix's own,
and the HELO name after it is whatever is left. Taking the longest
reply let a HELO name that spelt "; from=<..> to=<..> proto=.."
supply the row's sender, recipient and reply - and so make a
refusal read as the deny list's;
- an address with a quote, a bracket or a space is not kept: a quoted
sender could otherwise supply the recipient;
- the journal is cut to its row cap every 500 rows written, not only
every six hours;
- a queue id is forgotten when the message is queued or the id is
opened by another listener, and a stale place in the queue of
arrivals no longer drops a live id;
- milter-hold lines are not read: the held message reaches the
journal milter, which writes its row - it was written twice.
Lists (internal/inbound/lists.go): a change of the table and the
rewrite of the files are one step under a mutex; a failed rewrite puts
a removed entry back and rewrites after taking a new one out.
Store: the row cap removes the oldest by time, as the page orders them.
Page: on a sheet a refusal's text is a Reply whatever it starts with.
Help and the guide say that an allow entry for a sender address trusts
an address anyone can claim (design commit before this one).
docs/security.md: the two reviews; the roles table gains Inbound > Log
and Filter lists; Mail path describes the milters, the tailer and the
lists; four accepted risks - the filter's verdict while it is down, an
allow entry by sender address, the list files' mode, log rows held by
domain name. The plan's stale lines (size and rate refusals, who reads
the journal) are corrected.
Left as found, told to the owner: the journal's rows after an unclean
stop may be written twice (the tailer saves its place every five
seconds); a "Deny sender" link is offered for an address the form then
refuses; 1.2.3.4 and 1.2.3.4/32 are two entries.
Checked on the test server, uncommitted tree: go vet ./... ok,
go test ./... ok (22 packages), make e2e ok.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
4dd46ea355 |
dmarc: a report is bounded, kept per domain, and ingested one at a time
Security review of the DMARC report path (Fable, 2026-10-11), which ran for the first time in 2.0.0. No Critical or High finding. Fixed: - Medium: a report was bounded only as 8 MiB of XML - some 160 000 records or one name of megabytes, all of it rows and table cells. At most 5 000 records (more is ErrRejected, dropped), text fields cut to 255 bytes on a character boundary, a record's count capped. - Medium: the cap of 500 reports was for the whole server, so a stranger filing under one domain's address evicted every other domain's reports. PruneDMARCReports counts per domain. - Low: the pipe service ran up to default_process_limit (100) commands at once against the panel's database; maxproc is 1. - Low: the reason logged for a dropped message carried the sender's bytes (header line, zip entry name) as they came; cut to 200 bytes and reduced to printable ASCII, zip entry names quoted. - Low: SELFPOST_DATA_DIR / SELFPOST_DB_PATH with whitespace or "$" would reach the command through export_environment as another path; refused at start when DMARC ingest is on. Left as they are, told to the owner: the parse-failure count is a lifetime figure shown under "This week"; a report larger than the command reads is dropped as unreadable; nested multipart is not searched. The hub's Retention line follows the design commit before this one. security.md: the review, and the accepted-risk entry says what a stranger can and cannot do now. The roadmap no longer calls the review pending. go vet ./cmd/... ./internal/dmarc/ ./internal/store/: ok go test ./cmd/... ./internal/dmarc/ ./internal/store/ ./internal/web/...: ok make e2e on the test server (with the port-25 scenarios of the next commit): ok Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
ed3cb4aaac |
docs: the panel as it is in 2.0
Stage 3, step 3. Written by Sonnet from the code and the plan, checked
by Opus.
- guide.md: a section on the panel - menu, paths, the roles global and
domain with outbound and inbound assigned separately -, Overview and
Health, Queue and System log, Account and Server > Settings, the
domain page / Domain settings / application form, Help as a page of
topics. The DMARC report address is one of three choices set in
Domain settings. The Spam filter box, the two INBOUND_ANTISPAM_*
variables the panel reads, and the filter's socket on Health.
Sessions; backup and export encrypted unless the box is unticked;
1.x data is not restored into 2.0.
- architecture.md: Panel HTTP surface rewritten from web.go (routes,
the /server/ guard, per-object checks, <page>/fragment, one layout,
typed page data, the kit and its guards, CSP and htmx); Persistence
gains the database - one baseline, a 1.x file refused, the tables as
they are.
- security.md: roles and what each reaches, as built; sessions by user
id and what ends them; state-changing requests; errors shown to
users; the 2.0 review; two accepted risks from it - a delegated
inbound upstream may be any host and port, and Account's profile is
saved without the password.
- CHANGELOG: Removed opens with "2.0 starts from an empty data
directory"; entries that describe the user-default report address
say they were replaced before release; the filter's socket.
- roadmap.md: two review follow-up rows struck as retired by the
redesign (.pair / .split, the two back links); password-reset notes
that changing the account e-mail must then ask for the password.
Progress 25/27.
- development.md: the component kit and its guards; README and
product.md: wording.
Left as they are
- The third follow-up row the plan expected to strike - initShowWhen
is not re-run after an htmx swap - still holds: no polled fragment
carries such a control today, so nothing breaks, but the redesign did
not retire it.
- guide.md embeds no screenshots, so none needed retaking.
- README and guide still name image 1.9.5 - the version cut.
- plans/preflight.md and plans/inbound-antispam-panel.md use pre-2.0
paths; roadmap's template-data-typing is largely done by the
redesign.
go test -count=1 ./cmd/panel (env-doc tables): ok
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mix
|
7ef7f75246 |
release: 1.9.2: Review pass: port-25 milters, DMARC validation, rate-limit fix
Review pass over `1.4.0`…`1.9.1`: port 25 no longer shares the submission milter chain, DMARC reports are validated before they are stored, and the auto rate limit is correct for a non-default level-1 window. Schema migration `0010` (index only). Upgrading is a tag bump. Added: - SQLite migration `0010_send_log_app_login_index.sql` — - DMARC aggregate reports are accepted as **zip** as well as gzip or plain XML - e2e: `checkPort25ConfigCombinations` regenerates the Postfix configuration Changed: - README hero line and a **Positioning** block in `docs/product.md` record the Fixed: - The setup account's password is hashed at bcrypt cost `12` like every other - Login/setup rate limiter: protecting blocked buckets from eviction is now - `postqueue -p` output is bounded to 4 MiB (the timeout alone left the size of - [schema-migrations.md](docs/schema-migrations.md): the schema section was - postqueue reader is now time-bounded: `postqueue -p` runs under a 5-second … (11 more in CHANGELOG) Changed: - [roadmap.md](docs/roadmap.md) now carries everything the 2026-08-19 code - Extracted `internal/configsafe` — the empty-value and forbidden-character - Build, deploy and migration comments no longer cite the archived - Dropped the `parseDomainRateLimitForm` / `parseAppRateLimitForm` pass-through - Extracted shared helpers: `internal/atomicfile` (atomic temp-write+rename) and … (7 more in CHANGELOG) Removed: - Unused legacy asset `docs/assets/icon.png` (superseded by the four brand SVGs - Plan documents for already-shipped features: `domain-stats-auto-ratelimit`, Full detail: CHANGELOG.md (1.9.2). |
||
|
mix
|
656c4d4d7f |
release: 1.4.0: Optional inbound relay (backup-MX) on port 25
Optional inbound relay (backup-MX / forwarder) on port 25, off by default. Mail is accepted only for domains configured in the panel and forwarded to an upstream; there are still no mailboxes. A dedicated security review of the inbound path is still open on the plan (Fable). Added: - `INBOUND_RELAY_ENABLE` (default `false`): when true, Postfix listens on - Panel **Inbound** pages (global administrator): domains, upstream host/port - Optional `INBOUND_ANTISPAM_MILTER` on the inbound listener only, plus - Inbound rate limit (`INBOUND_RATE_LIMIT_MESSAGES_PER_IP`, default 20) and Changed: - Compose publishes host port 25 even when the flag is off (nothing listens - Full-backup restore Resync also rebuilds inbound maps when the flag is on. Full detail: CHANGELOG.md (1.4.0). |
||
|
mix
|
0730b2090e |
release: 1.3.0: 1.3.0-1.3.1: security pass, queue persist, full backup layout
[1.3.0] Security and quality after 1.2.5: domain-admin send-log authorization, fail-closed sign-in and application delete, level-2 rate-limit race fix, restore Resync, expanded tests, operator docs, release CI, and OFL for IBM Plex. Upgrading from 1.2.x is a tag bump; no migration. Added: - licence: the SIL Open Font License 1.1 text now travels with the IBM Plex - docs: agreed roadmap item **queue-retries** — show this Postfix's retry Security: - The independent security review of the send-log authorization and Fixed: - test (e2e): send-log status scrapers follow the badge markup in - security (panel): the Deliveries list is scoped to a domain administrator's - mail (level-2 rate limit): the ceiling is no longer overshot by messages that - panel (sign-in): a session that cannot be written to the database no longer - panel (applications): deleting an application removes its SASL credentials … (2 more in CHANGELOG) Changed: - docs: operator and as-built docs aligned with the code after a full - docs: [guide.md](docs/guide.md) reorganised into **Installation**, **Instance - docs: the 2026-08-13 full-tree review plan is complete — every phase (P0–P7) - licence: [NOTICE](NOTICE) tells modifiers to update `SourceURL` in - ci: the release image is published only for a **published** GitHub Release … (9 more in CHANGELOG) [1.3.1] Retry policy in the panel, persistent Postfix queue, and self-contained full backups. Mail queue and delivery history show this Postfix's first retry, backoff cap, and queue lifetime. Deferred mail survives container recreate. Full backups now archive `data/`, compose, `.env`, and `certs/`; the archive layout breaks 1.3.0 flat backups (unpack those with `tar xzf backup.tar.gz -C ./data` as before). Upgrading from 1.3.0 is a tag bump; no schema migration. Added: - Mail queue and a delivery's history show this Postfix's retry policy - docs: **Plan checklists** in [development.md](docs/development.md) — format, - docs: **Implementation checklists** with model routing in - docs: roadmap candidates **send-log-retention** (panel Settings for delivery - Postfix queue under `/data/postfix/queue` — deferred and active mail survive … (1 more in CHANGELOG) Changed: - **Breaking:** full-backup archive layout — paths are prefixed with `data/`; - docs: operator guide, architecture, security, and backup UI updated for - docs: HTML mockups for a full panel UI refresh Changed: - docs: panel UI mockups after review — Status restored to live readings - docs: panel UI design system and mockups rebuilt as separate pages - docs: panel UI mockups — add-domain sits in the list card (Domains and Fixed: - ci (GHCR): per-arch package tags (`X.Y.Z-amd64`, `X.Y.Z-arm64`) are dropped Squashed CHANGELOG sections: [1.3.0], [1.3.1]. Full detail: CHANGELOG.md (1.3.0, 1.3.1). |
||
|
mix
|
75207f0d1e |
release: 1.0.0: Public 1.0 image; delivery log; docs and SECURITY.md (incl. 1.0.1)
[1.0.0]
Added:
- A **Delivery log** on each delivery's page (`/deliveries/{id}`): the
- A **History** block on the same page: the journal's two timestamps stated as
Fixed:
- Postfix config: copy TLS cert/key from the (often `:ro`, host-owned) mount
- Postfix config: allow `maillog_file` under `/data` via
- E2e: read `/data/setup-token` via `docker compose exec` (file is `0600`
- Entrypoint: check `SELFPOST_HOSTNAME` before `/data` setup (so a bad identity
- E2e gate: wait for host-published `/healthz` before panel setup, and stop
… (3 more in CHANGELOG)
Changed:
- Document what `.spbk` and `.spde` stand for (SelfPost backup / SelfPost domain
- Docs aligned with the code: setup URL is `/setup/<token>` (README and
- Full backups no longer carry `/data/log`. It is Postfix's raw log plus its
- Monitoring screens (status, mail queue, system log, deliveries) use adaptive
- Documentation package consolidated into `docs/development.md`: Documentation
… (4 more in CHANGELOG)
[1.0.1]
A documentation and packaging release: no change to the mail path, the database, or the on-disk layout. Upgrading is a tag bump.
Added:
- `SECURITY.md` — how to report a vulnerability privately (GitHub private
- [docs/plans/](docs/plans/) — one document per agreed extension: the optional
Changed:
- The panel's **Account** entry is now called **Settings** — nav link, page
- The signed-in name in the panel's nav is now labelled `User:`, so it reads as
- [docs/product.md](docs/product.md) reframes the future line: the inbound
- [docs/security.md](docs/security.md) is now in English, matching the rest of
- The README documentation table now points at `SECURITY.md` for reporting a
… (2 more in CHANGELOG)
Fixed:
- The panel's static assets are served with a content ETag and
Squashed CHANGELOG sections: [1.0.0], [1.0.1].
Full detail: CHANGELOG.md (1.0.0, 1.0.1).
|
||
|
mix
|
5e5d157496 |
release: 0.5.0: Pre-1.0 security review, domain-admin role, doc consolidation
A bounce could be recorded as a successful delivery. The log-tailer's Fixed: - A bounce could be recorded as a successful delivery. The log-tailer's - Log-tailer resumes where it stopped instead of jumping to end-of-file on - Level-2 rate limit no longer overshoots under concurrency: messages that Changed: - The project has a single public home: `github.com/mixeme/selfpost`. Codeberg - Code comments no longer cite the archived specification. References like - `docs/code-review.md` is gone. Its plan is finished — phases 0 (bar the - `docs/architecture.md` gained a *Code layers* section: a diagram of - Phase 1 doc/code hygiene (`docs/code-review.md`): removed ~30 stale … (1 more in CHANGELOG) Security: - Pre-release security review (plan § D, model Fable, 2026-08-06): full pass - `saslpasswd2` argv: the application login is now passed after a `--` Added: - Optional password encryption for the two secret-bearing downloads (plan - Domain import accepts an encrypted export: the envelope is detected by its - `selfpost-backup` writes encrypted archives and reads them back: - `TestParseDelivery` covers the exotic mail.log shapes the review asked for - docs: README *Encrypting a backup or export*; `docs/security.md` § … (14 more in CHANGELOG) Removed: - docs: `security.md` — accepted risk «restore old backup revives session rows» Changed: - docs: `implementation-plan.md` trimmed to the sole open v1.x gate — pre-release - docs: `architecture.md` — sessions (SQLite, idle renew, password change), - docs: `development.md` — expanded e2e stack and `release.yml` matrix workflow. - docs: `security.md` — accepted risk for send-log rows stuck at `queued` after - docs: `roadmap.md` — optional send-log / `mail.log` follow-ups under v1.x tail. … (10 more in CHANGELOG) Full detail: CHANGELOG.md (0.5.0). |
||
|
mix
|
8ce050ef7f |
release: 0.1.0: Phases 0-11: panel, Postfix/DKIM, milter, backup, Docker image
Initial feature-complete implementation of the v1.0 specification (phases 0-11 of `docs/implementation-plan.md`). Added: - Panel (Go, single static binary) with SQLite persistence, one-time - Domain management with per-domain DKIM (RSA-2048, generated in pure Go) and - Application (sender identity) management: SASL credentials via `sasldb2`, - Full Postfix relay config generated from env at container start: SMTPS 465, - Journal milter (pure Go, `go-milter`) recording every send to `send_log`; … (6 more in CHANGELOG) Full detail: CHANGELOG.md (0.1.0). |