ec08c8606bff716771e4117bae506a2306a94e06
9
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  mixandClaude Opus 5.5
|
cad1182150 |
audit 2c: what only the stand could answer, measured and written down
test / test (push) Canceled after 0s
All 2026-10-15; each written beside the code or text it settles. - A-43: /usr/sbin/postlog is -rwxr-xr-x root:root in the image (postfix 3.7.11-0+deb12u1; dpkg-statoverride lists postdrop and postqueue only): Debian does not install it set-gid, so it is no use to dmarc-ingest (cmd/panel/dmarc_ingest.go). - C-X1: OpenSSL 3.0.22 in the image prints the same public key from `x509 -pubkey` and `pkey -pubout` for RSA-2048, P-256, P-384 and a SEC1 P-256 key - cert-reload's same_pair holds for certbot's ECDSA keys. - C-K5, D-guide:933/:233: on the live server (Docker 29.6.1, userland proxy on 0.0.0.0 and ::, no IPv6 on the network) an outside IPv4 client and the host's own public IPv4 address are logged as themselves; the host's IPv6 address and 127.0.0.1 arrive as 172.18.0.1. Over IPv6 every client is the gateway: one level-1 budget, an application IP list cannot name them, rspamd sees the gateway. Guide paragraph under level 1, notes at the milter and allow-list, comments at the anvil setup and authip.go, and a Security entry in the CHANGELOG (an allow-list naming the gateway would admit every IPv6 client). - D-guide:61: a published port nothing listens on (a throwaway container, -p 20999:25) is refused from outside over IPv4 and from the host's public IPv4, accepted and closed through 127.0.0.1 - Docker's proxy, which IPv6 goes through too (not probed over IPv6 for this). - C-M8: the live installation has received one DMARC report, of one record: nothing to set maxReportRecords by yet - said at the constant. - D-S7, D-arch:516, D-arch:532: a new database filled through the store to 120 days at 1 900 messages a day (228 000 messages, 1.37 million lines, 464 MB) on the test server (2 cores): the longest write is the line prune after a 30-day gap, 1.9 s for 342 000 lines (0.4 s with nothing to delete); the send-log delete 0.6 s; 2 000 lines of a tailer pass 18 ms; VACUUM INTO 1.7 s; a second connection writing every 50 ms waited 1.8 s at most, no SQLITE_BUSY - inside busy_timeout's 5 s. architecture.md's "about a second per million lines" was five times too fast; its "six to ten lines of 200 bytes" is 6.0 lines of 146 bytes on the live data. - D-B16: which favicon is fetched, by the probe server's log: Edge 155 the SVG, the desktop app's embedded Chromium 152 the PNG, with or without sizes="any" - layout.html's "vector wins where supported, raster catches the rest" holds; Firefox and Safari not measured. - D-arch:121: the allow/deny trial again, in rspamd/rspamd:3.11.1-3 with today's multimap.conf: every mix of allow and deny entries matching one message ended reject; a changed map was used about 10 s later. - D-sec:424: rspamd runs as _rspamd, uid 11333; the panel is uid 999. Stand: go vet and go test ./... pass on the server (24 packages); make e2e exit 0. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
31c2b50457 |
antispam: rspamd strips a sender's own verdict for every client
test / test (push) Canceled after 0s
rspamd 3.11.1's milter_headers skips its verdict routines - removes none of the sender's X-Spamd-Result / X-Rspamd-Action, adds none - for a client it counts as local (loopback, a unix socket, local_addrs: the private ranges) or one that authenticated (skip_local, skip_authenticated, both on by default; milter_headers.lua skip_wanted(), lua_ip.c lua_ip_is_local()). The custom routine that signs X-SelfPost-Filter is never put through skip_wanted(), so it signed the sender's own verdict, and Inbound > Log showed it as rspamd's. Every sender is private when Docker's proxy relays port 25 from the bridge gateway. Both options set to false. Tried 2026-10-14 in a throwaway rspamd/rspamd:3.11.1-3 on the test server (rspamc --ucl, a message carrying its own verdict headers): old config, from 10.0.0.5 and as an authenticated user, the milter reply removed and added neither and added the signature; new config, both removed and rspamd's own added, as from 203.0.113.9. Also: the sender rules take the envelope only (extract_from = "smtp"; by default a bounce's From: header is used - tried: a bounce whose From: domain is denied was refused before, is not now; a denied sender is refused either way); the image pinned to 3.11.1-3, the build read (3.11 and 3.11.1 move with each rebuild); the prefilter lines no longer read go. architecture.md and security.md say so. Assumptions C-R7, B-R1, C-R4, C-R12, C-R5. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
599149bf83 |
build, deploy, inbound, dmarc, backup, e2e: cite the source of what they rely on (assumptions part C)
Comments only, no behaviour changed. Each main.cf/master.cf parameter the
build sets, the wrapper's and the reload hook's reliance on Postfix 3.7.11
(postfix-script, master.5, postconf.5, cleanup_init.c, smtpd_peer.c,
README_FILES), supervisor 4.2.5 (process.py, options.py, events.rst),
logrotate 3.21.0, OpenDKIM's config, Cyrus SASL's sasldb, rspamd 3.11.1
(milter_headers.lua, multimap, the map watcher), Docker Compose, CoreDNS
and certbot now say where that is written. Measurements already there stay
measurements ("date not recorded" where none was); hand-composed fixtures
say so.
Contradictions left for their own commits: C-P31 cleanup's size limit,
C-P42 master outside supervisor's signal, C-V5/V6 startsecs, C-V10,
C-S3/Q3 sasldb written in place, C-Q4/A1 certbot's symlinks, C-R7 rspamd
skips local clients but the signature routine does not, C-P8, C-R4, C-R12,
C-M7, C-E2, C-K8/K9, C-D1.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
1f44e40382 |
inbound-antispam-panel: the filter reads its signing key for every message
test / test (push) Canceled after 0s
The routine kept the key after its first read. SelfPost makes a new key when the file is lost or damaged, or a backup brings back another, and rspamd would then have gone on signing with the old one - every verdict unrecorded - until someone restarted the sidecar. The file is one short line; reading it per message costs nothing worth keeping a copy for. The guide says what never needs doing: nothing of rspamd's is cleared after a change of the lists or the key; a restart is for a change of its own configuration only. Prompted by the owner's question whether rspamd's cache needs clearing (2026-10-12). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
d398f488e2 |
inbound-antispam-panel: the filter signs what it judged
test / test (push) Canceled after 0s
Closes what the security review left as an accepted risk: with the
spam filter down - it is attached fail-open - nothing removes verdict
headers a sender wrote himself, and the inbound journal recorded his
verdict as the filter's. The owner asked whether rspamd could add a
header that proves the others are ours (2026-10-12) and agreed to a
signature: a fixed mark could be written by a sender as easily as the
verdict.
- inbound.FilterKey: a key of 32 random bytes, 64 hex characters, in
/data/antispam/filter.key, made on the first start with the relay
on. 0644 like the list files beside it: the filter is another user
in another container.
- deploy/antispam/rspamd/milter_headers.conf: a custom routine reads
the key through the directory the sidecar already mounts and adds
X-SelfPost-Filter, the HMAC-SHA256 of the message's queue id, hex;
a header of that name from the sender is removed.
- internal/milter/inbound.go: the verdict headers are kept as they
are read, and at end-of-message - when the queue id is known - they
count only if the signature fits (FilterSignature, hmac.Equal). No
key, no queue id, no signature or a wrong one: the row is that of
mail nobody judged (accept, selfpost, no detail).
The signature goes on to the upstream with the mail and is of no use
there: it fits one queue id.
Tried in a throwaway rspamd 3.11 container on the test server before
the Go side was written: the routine loads, signs
(2aa1ca6d... for key 0123...cdef and queue id 4A1B2C3D5E, the value
python's hmac gives and TestFilterSignatureIsWhatTheFilterWrites
pins), removes a sender's header of the same name, and adds nothing
without a queue id.
Tests: signed, unsigned, made-up, another message's, another key's,
the sender's followed by the real one, the next message on the
connection, no queue id; the key made once, read after, replaced when
damaged, left alone by the lists. e2e: filter.key is there, 644, 65
bytes.
docs/security.md: the accepted risk is replaced by a narrower one (the
key is readable on the host); Mail path describes the signature.
Checked on the test server, uncommitted tree: go vet ./... ok,
go test ./... ok (22 packages), make e2e ok.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
7192c3861e |
inbound-antispam-panel: Filter lists, kind column, matches, note on a sheet
Follows the design commit before it (owner's words quoted there). The lists' tables are Value, Kind, Matched and Remove. The kind tag opens the entry's sheet: note, day added, how often it decided a message in the days the log keeps, and the last match. Matches are read off the journal on each view, nothing is stored (inbound.Lists.Usage, store.ListSpamListHits). A row counts for an entry when the list decided the message - a rejected row whose reply is the deny rule's message, an accepted row whose verdict carries the allow rule's symbol for that kind - and the entry fits the row's sender or client address the way rspamd matches it: an address whole, a domain as the sender's domain, a network containing the client (an IPv4-mapped address as IPv4). A failure to count shows the lists with "never" and logs why. For that the journal milter keeps the lists' own symbols ahead of its six-symbol cap: rspamd writes symbols heaviest first, so an allow entry's -100 came last and was cut behind any six others. The plan gains "Filter list usage": what counting from the journal implies, and - the owner asked for it in writing - the conditions under which a counter kept with each entry becomes worth a migration (the journal cut by its row cap and not by age; a short retention; counts that must outlive the journal; a slow page). multimap.conf says which of its texts SelfPost reads back. Tests: Usage over every kind on both lists and the rows that are nobody's; the milter's symbol order; the store query; the page and its sheets; a handler test from journal rows to the numbers on the page. Seen: the fixture page with a sheet open, headless Edge at 1360 px - the same as the accepted drawing. Checked on the test server, uncommitted tree: go vet ./... ok, go test ./... ok (22 packages), make e2e ok. Not seen in a real run: a count above zero. It needs an entry added in the panel, which I cannot sign in to, and then mail that the list decides; in particular the deny rule's message arriving in mail.log as the reply of a milter-reject line is what the trial with rspamc showed, not yet what Postfix logged. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
eea40bcd49 |
inbound-antispam-panel: filter lists, written as rspamd maps
Step 5/12 of docs/plans/inbound-antispam-panel.md.
Store: AddSpamListEntry, ListSpamListEntries, DeleteSpamListEntry.
internal/inbound/lists.go validates and normalises an entry - sender
address, sender domain, client address or network (canonical text, an
IPv4-mapped address as IPv4, /0 refused) - and writes the lists as six
map files under /data/antispam (ANTISPAM_DIR), each atomically, 0644 in
a 0755 directory: the filter is another user in another container. All
six are written on every change and on every start with the relay on,
empty ones included. An entry whose maps could not be written is taken
back out of the table. The writer refuses a stored value with
whitespace, a newline or # in it.
The plan's allow.map / deny.map became one file per list and entry
type: to rspamd an IP map and a sender map are different map types.
deploy/antispam/rspamd/multimap.conf holds the rules; the fragment
mounts it and ./data/antispam into the sidecar. Deny is a prefilter
reject, allow a symbol weighing -100. Tried in a throwaway rspamd 3.11
container on the test server:
- with allow as a prefilter accept, an address on both lists was
accepted and an IP on both was refused - the rule that ran first
decided; with the weight, deny won in all five mixed cases;
- IPv4, IPv6, address (any case), domain (not its subdomains) match;
- a rewritten file is reread in about ten seconds, no restart;
- files that appear after rspamd started are loaded the same way.
No page edits the lists yet (step 6).
Checked on the test server, uncommitted tree: go vet ./... ok,
go test ./... ok (22 packages), make e2e ok - with the relay on
/data/antispam is 755 and holds the six maps, 644, empty.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
28ec784ae2 |
inbound-antispam-panel: inbound journal milter on port 25
Step 3/12 of docs/plans/inbound-antispam-panel.md. The panel serves a second milter while the inbound relay is on (internal/milter/inbound.go, socket INBOUND_JOURNAL_MILTER_SOCKET, default /run/selfpost/inbound-journal.sock). build/postfix-config.sh puts it last on port 25, after the optional antispam milter, with default_action=accept; postfix-wrapper.sh waits for its socket. At end-of-message it writes one inbound_spam_log row per recipient at an inbound domain - other port-25 recipients (DMARC report addresses) get none - and always accepts. With a filter attached it reads the verdict from X-Rspamd-Action and X-Spamd-Result (action, score, up to six weighted symbols, only what the patterns recognise, 255 bytes); without one those headers are the sender's and are not read. The plan named X-Rspamd-Score, which rspamd does not have. The antispam compose fragment mounts rspamd/milter_headers.conf into the sidecar so that it adds the two headers (checked in rspamd 3.11: both routines exist and remove a sender's own headers of those names). Store: InsertInboundSpam, IsInboundDomain. Checked on the test server, uncommitted tree: go vet ./... ok, go test ./... ok (22 packages), make e2e ok - the relayed message of inbound_relay_delivers_and_refuses has its journal row (accept by selfpost) and the DMARC report sent through the same listener has none. Not yet seen in a real run: a verdict written by rspamd reaching this milter. The e2e stand has no filter, and the test server's only inbound domain has no upstream, so it accepts no mail. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mix
|
656c4d4d7f |
release: 1.4.0: Optional inbound relay (backup-MX) on port 25
Optional inbound relay (backup-MX / forwarder) on port 25, off by default. Mail is accepted only for domains configured in the panel and forwarded to an upstream; there are still no mailboxes. A dedicated security review of the inbound path is still open on the plan (Fable). Added: - `INBOUND_RELAY_ENABLE` (default `false`): when true, Postfix listens on - Panel **Inbound** pages (global administrator): domains, upstream host/port - Optional `INBOUND_ANTISPAM_MILTER` on the inbound listener only, plus - Inbound rate limit (`INBOUND_RATE_LIMIT_MESSAGES_PER_IP`, default 20) and Changed: - Compose publishes host port 25 even when the flag is off (nothing listens - Full-backup restore Resync also rebuilds inbound maps when the flag is on. Full detail: CHANGELOG.md (1.4.0). |