ec08c8606bff716771e4117bae506a2306a94e06
50
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  mixandClaude Opus 5.5
|
cad1182150 |
audit 2c: what only the stand could answer, measured and written down
test / test (push) Canceled after 0s
All 2026-10-15; each written beside the code or text it settles. - A-43: /usr/sbin/postlog is -rwxr-xr-x root:root in the image (postfix 3.7.11-0+deb12u1; dpkg-statoverride lists postdrop and postqueue only): Debian does not install it set-gid, so it is no use to dmarc-ingest (cmd/panel/dmarc_ingest.go). - C-X1: OpenSSL 3.0.22 in the image prints the same public key from `x509 -pubkey` and `pkey -pubout` for RSA-2048, P-256, P-384 and a SEC1 P-256 key - cert-reload's same_pair holds for certbot's ECDSA keys. - C-K5, D-guide:933/:233: on the live server (Docker 29.6.1, userland proxy on 0.0.0.0 and ::, no IPv6 on the network) an outside IPv4 client and the host's own public IPv4 address are logged as themselves; the host's IPv6 address and 127.0.0.1 arrive as 172.18.0.1. Over IPv6 every client is the gateway: one level-1 budget, an application IP list cannot name them, rspamd sees the gateway. Guide paragraph under level 1, notes at the milter and allow-list, comments at the anvil setup and authip.go, and a Security entry in the CHANGELOG (an allow-list naming the gateway would admit every IPv6 client). - D-guide:61: a published port nothing listens on (a throwaway container, -p 20999:25) is refused from outside over IPv4 and from the host's public IPv4, accepted and closed through 127.0.0.1 - Docker's proxy, which IPv6 goes through too (not probed over IPv6 for this). - C-M8: the live installation has received one DMARC report, of one record: nothing to set maxReportRecords by yet - said at the constant. - D-S7, D-arch:516, D-arch:532: a new database filled through the store to 120 days at 1 900 messages a day (228 000 messages, 1.37 million lines, 464 MB) on the test server (2 cores): the longest write is the line prune after a 30-day gap, 1.9 s for 342 000 lines (0.4 s with nothing to delete); the send-log delete 0.6 s; 2 000 lines of a tailer pass 18 ms; VACUUM INTO 1.7 s; a second connection writing every 50 ms waited 1.8 s at most, no SQLITE_BUSY - inside busy_timeout's 5 s. architecture.md's "about a second per million lines" was five times too fast; its "six to ten lines of 200 bytes" is 6.0 lines of 146 bytes on the live data. - D-B16: which favicon is fetched, by the probe server's log: Edge 155 the SVG, the desktop app's embedded Chromium 152 the PNG, with or without sizes="any" - layout.html's "vector wins where supported, raster catches the rest" holds; Firefox and Safari not measured. - D-arch:121: the allow/deny trial again, in rspamd/rspamd:3.11.1-3 with today's multimap.conf: every mix of allow and deny entries matching one message ended reject; a changed map was used about 10 s later. - D-sec:424: rspamd runs as _rspamd, uid 11333; the panel is uid 999. Stand: go vet and go test ./... pass on the server (24 packages); make e2e exit 0. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
3c63ecc1ad |
store: migrations under BEGIN IMMEDIATE, the version read again inside
test / test (push) Canceled after 0s
D-S3. A deferred BEGIN starts nothing until the first access (SQLite, lang_transaction.html § 2.2), and migrate() read user_version outside the transaction: after an upgrade the panel and dmarc-ingest, opening the file at once, could both read the old version, both begin, and the second applied the next migration again on the migrated file - "already exists", that Open failing (nothing damaged: its transaction rolled back). The DSN now has _txlock=immediate (modernc.org/sqlite v1.60.1, sqlite.go applyQueryParams() sets beginMode, tx.go newTx() issues "begin immediate" for any transaction not read-only), so a migration holds the write lock from its BEGIN, and migrate() reads user_version again inside it and skips one another process applied meanwhile. Test TestTwoOpensMigrateOnce: a raw connection holds BEGIN IMMEDIATE on a new file while two Opens read version 0 and queue on their first BEGIN; released, both succeed and user_version is the number of migrations. Without the fix it fails as the register said: "apply migration 0001_init.sql: SQL logic error: table settings already exists (1)". Stand (2026-10-15): go vet and go test ./... pass on the server (24 packages); make e2e exit 0. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
c8f669714e |
journal milter: recipients as Postfix logs them, once each
test / test (push) Canceled after 0s
The row's recipient has to be the address Postfix writes in to=<..> or orig_to=<..>, or the delivery line finds no row and the sweep closes it as bounced. Postfix 3.7.11 hands the milter the RCPT argument as the client wrote it (smtpd.c, milter_argv(); extract_addr() leaves it), go-milter v0.4.1 trims "<>" and drops the ESMTP parameters (session.go, case CodeRcpt) - so cleanAddress's cut at the first blank broke a quoted local part (B-G5). Postfix keeps the address in internal form (tok822: quotes off, backslash escapes taken) and logs it external (info_log_addr_form.c, quote_822_local(): quoted again only when not a dot-string); recipientAsLogged does the same, "ab"@x -> ab@x, "a b"@x stays. A recipient given twice in any case is one row: cleanup drops the duplicate, comparing folded (cleanup_out_recipient.c, been_here(), BH_FLAG_FOLD; A-31). A rewritten recipient is matched by orig_to=, which log_adhoc() writes only when it differs (A-9). The store's case-insensitive match stays, now with its reason from the source (D-S20). Stand (2026-10-14, make e2e, exit 0): new recipients_as_postfix_logs_them - RCPT TO "x y"@, "ab"@ and "X Y"@ sink.e2e.test give two rows, "x y"@sink.e2e.test and ab@sink.e2e.test, both sent. go vet and go test ./... pass on the server; a unit test drives the milter through go-milter's own client. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
0ed03b2094 |
log tailer: expiry, Postfix's time values and refusal lines as Postfix writes them
test / test (push) Canceled after 0s
Expiry (assumptions A-8). Postfix 3.7.11 logs the end of a message's queue lifetime once per message, "<id>: from=<..>, status=expired, returned to sender" (src/qmgr/qmgr_active.c, qmgr_active_done_25_generic()), with no line per recipient; the tailer waited for "to=..., status=expired", which no Postfix writes, and the sweep closed only queued rows, so such rows stayed deferred. The tailer now reads qmgr's line (ExpireMessage: each recipient's newest open row of the id becomes bounced); the sweep closes a deferred row too when Postfix no longer holds the message, and counts as missed only a final line (sent, bounced, expiry). The queue listing's '#' (forced expiry, showq_compat.c showq_message()) is read as a flag (B-PQ1). Time values (B-PQ10, B-PQ11): conv_time() ported - one number, one lower-case unit, the parameter's default unit when none (get_def_time_unit: d for the lifetimes, h for delay_warning_time), the rest ignored; postconf -h -x expands $name; bounce_queue_lifetime capped at maximal_queue_lifetime as qmgr_post_init() caps it, so LongestLifetime is the queue lifetime. Refusals (A-21, A-23, A-24, A-15): smtpd_whatsup() ends the NOQUEUE line with sasl_username=<login> on an authenticated session; the line is now matched to its row by client, login and sender, and a line without a login is no application's. The client= line's login ends at the comma. The "IPv6:" trim goes (namaddr is built from state->addr). A row recovered from cleanup's line says that line names the last recipient only. Stand (2026-10-14, make e2e, exit 0): new expired_message_is_closed - defer_transports=smtp makes the retry service defer the message, postsuper -e and postqueue -i force its expiry; mail.log has "<id>: from=<alerts@sender.e2e.test>, status=force-expired, returned to sender" and the row goes deferred -> bounced; refusals_show_postfixs_line passes with the login match. go vet and go test ./... pass on the server. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
ad3d834392 |
store, web: cite the source of what they rely on (assumptions part D)
Comments only, no behaviour changed. modernc.org/sqlite v1.60.1 (the _pragma list on every connection, busy_timeout first; extended result codes; a deferred BEGIN; multi-statement Exec) and SQLite 3.53.4's documentation (transactions, WAL, foreign keys, NOCASE, upsert, julianday, partial indexes); htmx 2.0.4 src/htmx.js; the Fetch and HTML standards for Sec-Fetch-Site, Origin, SameSite, __Host-, CSP and defer order; Go's html/template. Comments the source contradicts are corrected - the driver does not serialise writes (SetMaxOpenConns(1) does), htmx:load fires per swapped element, no-store does not keep a page out of history. Left for their own commits: D-S3 a migration two processes can both run, D-S20 recipient case, D-B3 Origin: null under Referrer-Policy: no-referrer, D-H5/H6/H7/H9 (audit M11, stage 4). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
af130e268a |
findings of the reviews of audit stage 2b
Technical review (Opus) and security review (Fable) of 5be109b..5154bba;
reports in the session's scratchpad. Nothing above low from security; one
bug and three risks from the technical review. Migration 0009 is not
deployed, so it was extended.
- Bug: two refusals of one second swapped their NOQUEUE lines (each line
went to the newest lineless row). AttachRefusalLine now matches the
client address too (send_log.client_ip, written by the journal milter -
Postfix's line names the client and the sender, never the login: the
sasl_username part of the pattern never matched and could be fed by HELO,
security F1/F2), takes the nearest row in time and the oldest of equals,
and a line already on a row goes on no other (security F6).
- Waiting lines and recoveries lived only in memory while the saved offset
moved past them: a stop within 30 s lost them. The tracker now never saves
an offset past the oldest waiting item in its file (tracker.hold,
refusalLines.oldest) - for a recovery, the client= line that names its
login - so they are read again; the "once" guards make that harmless.
- A recovered row whose login the tailer did not see was nobody's: its
domain_id falls back to the envelope domain's.
- The fingerprint's file identity is the inode alone: the device number can
change across a host reboot and make the same log look rotated.
- A refused row carries its queue id; UpdateStatus's "newest row" now skips
refused rows, so a later message with that id does not flip it to sent.
- The alive mark: its age is read first and kept from then on, so asking
supervisord for 30 s cannot make it stale; the entrypoint removes it with
the sockets - a container restart is not the check's downtime, and a mark
from before would have counted the whole outage as "≈".
- Security F3: the sender check prints no ";" of the client's in the From:
text of its reply, and the tailer reads the envelope after the first ";"
- Postfix's own text.
- A refused row with a queue id and no stored lines says so (it was told the
mail.log text of 2.2.0); the fact's em dash is the house hyphen.
- Docs: architecture (client address, no login), guide § Health (warns on
either count), help topics log and sender-check (design
|
||
|
mixandClaude Opus 5.5
|
ac985d03a8 |
sender check: connections and messages counted apart; downtime estimated when supervisord is silent (stage 2b)
Following the design commit
|
||
|
mixandClaude Opus 5.5
|
65d916f26a |
logtail: a refusal the panel did not get to write is written from mail.log (stage 2b)
test / test (push) Canceled after 0s
The sender check answers 550 5.7.1 and writes the refused row through a
buffer a moment later; a panel stopped in between (a rollout, a kill) left
an application refused and a log that did not know it. A refusal at MAIL
FROM needs nothing: the journal milter writes its row before it answers.
- logtail.refusalLines remembers each queue id's login from smtpd's
"<id>: client=..., sasl_username=<login>" (4096 ids at most) and, on
cleanup's "<id>: milter-reject: END-OF-MESSAGE ...: 5.7.1 From: <line> -
<why>; from=<...> to=<...>", waits 30 s and hands it to
store.RecoverRefusal - an INSERT ... WHERE NOT EXISTS a refused row of that
queue id within two minutes: the row the panel wrote, or one recovered
before, means nothing is written. It is read from the saved offset on, so
a kill is covered as well as a clean stop - which a flush of the buffer at
shutdown would not.
- Migration 0009 (not deployed yet) gains send_log.recovered; the row is
written with the line's time, the login's domain id, reason "from", the
From: line as the check printed it (to the last " - " before ";").
- The message page: a fact "Written: from mail.log after a restart: the
panel stopped before it wrote the refusal".
Tests: store (not written when the panel wrote it; written once however
often); logtail (the login from client=, the From: line with a " - " in it,
nothing before the wait is over); view (the fact). e2e
refusal_recovered_from_the_log: a From: refusal, the panel stopped, its row
deleted and the tailer's saved place moved before the message's first line
(python3 in the container, as the panel's user - a kill cannot be timed to
that moment from outside); started again, the row is back, recovered, once.
Also fixed: handlers TestMessagePageOfARefusedMessage still expected the
old sentence; it failed on the server after
|
||
|
mixandClaude Opus 5.5
|
e166a2ebd6 |
refused messages: the page shows what Postfix wrote (stage 2b, 0009)
The Delivery log box of every refused row said "This message never reached
the queue, so Postfix wrote no delivery lines for it" - untrue: Postfix
wrote a line for each. The owner, 2026-10-13: the box is required on every
message page. Pictured for him first (dev/shots, the refused variant of
out-message: wrong From with its queue id lines, rate-limited with the
NOQUEUE line); the variant has no mockup screen of its own - the guard ties
screens to pages, and its outline is out-message's.
- Wrong From: cleanup gives the message a queue id before the headers are
judged; the sender check reads {i} at end-of-headers and writes it on the
refused row. Its lines - stored under the id like any other's - are on the
page, but only those from 10 minutes before to 1 minute after the refusal
(store.SendLogLines for a rejected row): Postfix frees the id at once, and
a later message with it lends nothing. No mail.log fallback for a refused
row, for the same reason.
- Rate-limited and wrong client: refused at MAIL FROM, no queue id. Migration
0009 adds send_log.refusal_line; logtail.refusalLines matches smtpd's
"NOQUEUE: milter-reject: MAIL from ...; from=<...>" (not port 25's, not
CONNECT/EHLO) and store.AttachRefusalLine puts it on the newest refused row
of that sender (and login, when the line names it) within two minutes; a
line whose row is not written yet waits up to 30 s (retried at each pass).
- The page: the queue id fact says "given, the message was not queued" or
"none - refused at MAIL FROM, before one is given"; the box's caption is
"The line from mail.log for this refusal" for the latter; a row from
before says the line was not kept. LogLineLevel colours a refusal by its
reply: 5xx red, 4xx amber (IPv6 clients included). The id in the fact is
not muted as in the picture: the kit has no muted inline.
Tests: store (attach by sender, login, time; not a queued row, not one an
hour off; a refused row's lines are its own minutes); logtail (attach, wait
and retry, port 25 and other lines ignored); milter (the refused row carries
{i}); view (facts, caption, line levels); handlers (the line on the page,
the sentence without it). e2e refusals_show_postfixs_line: a client-address
refusal made there, and the pages of a wrong From, a rate-limited and a
wrong client refusal each show Postfix's line.
schema-migrations row 9, CHANGELOG [Unreleased], audit plan line ticked,
roadmap 25/62.
Evidence on the test server for this tree: make e2e exit 0 (the new case
in 5.4 s); go test ./... ok but for two schema tests, fixed after the run
(the schema at 0009) - store tests ok locally; the full run follows before
the push.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
c452606175 |
logtail: the deferred counter remembers a place in the log, not a second (stage 2b)
test / test (push) Canceled after 0s
The counter passed over, while catching up after a start, every warning no later than the last one counted - by time; mail.log stamps whole seconds, so a second warning of that second, later in the file, was lost. - The tailer gives each line its place (Place: the file's fingerprint and the offset just past the line): follow tracks the bytes the reader hands over, readRotated likewise in mail.log.1. Run hands tr.line to the counter. - store.AddSenderCheckDeferred(at, n, place) counts, moves the last-deferral mark (never back - an upsert WHERE) and saves the place (settings sender_check_counted_place) in one transaction. - Catching up, a warning in the file of the last one counted is passed over by place (end <= counted end); in another file - a rotated log read again - by time, as before. The fingerprint carries the inode, so the place stays true across a rotation. Tests: two warnings of one second, an unclean stop between them, all lines read again - each counted once; the store saves the place with the count and keeps the latest deferral time. Existing counter tests pass a zero place (time rule). CHANGELOG [Unreleased], audit plan line ticked, roadmap 24/62. Evidence: go vet ./... clean; go test ./internal/store, ./internal/logtail ok (but for the Windows-only test); the server run follows before the push. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
4678015bbd |
logtail: a log rotated while the panel was down is read to its end (stage 2b)
At start, a saved offset whose fingerprint was not the current file's meant "start on the new file": what Postfix wrote between the panel's stop and the rotation was never read - delivery statuses, stored lines, refusals, inbound journal rows, the deferred counter. - tracker.resume marks the case (behind, prev); follow calls readRotated before the new file: it opens mail.log.1 (delaycompress leaves it plain), checks by fingerprint that it is the file the place belongs to, reads it from the saved offset to its end through handle (catching up: the once-protections apply) and flushes the stored lines. - Not found, not that file, or the offset past its end (rotated twice): logged, with the saved place's time - from when nothing was read. - The fingerprint gains the file's identity (device.inode, fileid_unix.go; empty elsewhere): two logs that begin alike are two files - the review-2026-08-followups row on collisions. A fingerprint saved before (hash alone) still matches by its hash (sameLog), so the first start after the upgrade resumes where it was. - store.LogtailState reads back updated_at. Tests: stop, append, rotate, append, start - both halves read, once each, the earlier line not again; a mail.log.1 that is another file is not read from the place; sameLog with an old and a new fingerprint. CHANGELOG [Unreleased], audit plan line ticked, roadmap 23/62. Evidence: GOOS=linux go vet ./internal/logtail clean; go test ./internal/logtail ok on Windows but for TestFollowTailsAndRotates; the server run follows before the push. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
ef18ef21a0 |
findings of the reviews of audit stage 2
test / test (push) Canceled after 0s
Technical review (Opus) and security review (Fable) of a59e3d4..cb5a4a2;
reports in the session's scratchpad. Nothing critical, high or medium; no
outright bug. Fixed:
- F2, F3 (0008 backfill, before it runs on the live database): rows are
filled by the rule new rows follow - the application's domain, then the
name's - and only by a domain and application that existed when the row
was written (created_at); the inbound log likewise. Test: the migration's
UPDATEs re-run on prepared rows (before the domain, after, null sender,
application gone, a stranger's name). Dry run on a copy of the live
database: 68/68 and 10/10 rows filled, none disagreeing with its login's
domain, integrity ok.
- V2, F4: an application's statistics and level-2 count are its login's
rows of its domain (appByLogin), and StatsWindow starts no earlier than
the entity's creation; the message page's "may send as" only for a login
still of the row's domain. Test: a login taken again in another domain
starts at zero.
- F7: MAIL FROM:<> is held to the domain limit of its login
(ApplicationByLogin fills DomainName).
- V3: an imported DKIM selector is held to DNS labels (validate.Selector).
- F5, F6: an imported auto limit's numbers are dropped and recalculated
right after the import; its mode is stored trimmed.
- V6: the store refuses a role that is neither global nor domain.
- F9: SaveUser keeps the stored hash when no new password is given (the
form no longer writes back the hash it read). F10: a reach naming a
domain deleted meanwhile is ErrNoSuchDomain, answered on the form.
- V4, F12: from-lines-other.txt - lines naming another sender ({other}) in
a quoted string, a quoted pair, capitals, a comment, an encoded word, a
quoted local part; the unit test wants each refused, the e2e
(lines_naming_another_sender_never_signed_for_it) wants each refused and
none signed for it. The passed list gained a.{DOMAIN}, a comment after
the angle address, a quoted local part, and "b@ {other}" - passed by
design (security.md), and the e2e shows it signed for the own domain.
- F13: e2e login_in_other_capitals_does_not_authenticate - AUTH with the
login upper-cased gets 535.
Not changed, written down: V1/F1 - L8 is half closed (refused or passed
still tells an application which domains are hosted here); security.md's
accepted risks and the CHANGELOG say so, and the owner is asked whether to
refuse every foreign address in a display name (changes the 2.4.0 rule).
F11 - deleting a domain rewrites its rows' domain_id (seconds at 1e5 rows),
accepted at this size. F8 (test cannot tell write-first from read-first;
the reviewer verified it with two stores, 30/30), V5, V7, P2: noted.
Evidence on the test server for this tree: go vet clean, go test ./... 23
packages ok, make e2e exit 0 with the three new cases.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
a618ffb0e4 |
send log: rows belong to a domain by id (audit L12, 0008)
A domain user's log, the message page, a domain's statistics, the level-2 count and the notifier's refusal count picked send-log rows by domain name, so a domain deleted and re-added under its old name showed its earlier mail to the next assignee and went on counting it. Migration 0008 (not run on the live database yet, so extended here): send_log.domain_id and inbound_spam_log.inbound_domain_id, REFERENCES ... ON DELETE SET NULL, filled once by name from the registry as it is at migration time, each with an (id, created_at) index. - Writes: InsertQueued / InsertRejected set domain_id to the domain of the row's login (loginDomainID) - the journal milter and the sender check's refusal rows both go through them; the inbound journal sets inbound_domain_id from the inbound domain's name at insert. - Reads: SendLogFilter.DomainIDs (was Domains, by name) and InboundSpamFilter.DomainIDs are the scope; the global role still reads everything. The message page checks row.DomainID against the user's domains. DomainSendStats and CountMessages keep their name argument and select domain_id = (SELECT id FROM domains WHERE name = ?). The notifier joins send_log.domain_id to the domain and its application. - DMARC reports stay by name on purpose (a report is about the DNS name). Tests: store - scope by ids; a re-added domain's log, level-2 count and statistics hold its own row only, the global log both; inbound scope by ids. Handlers - the new assignee gets 404 for the old row's page and does not see it in the log, the global role sees both. Tests that wrote rows for a login that is no application now register it (a row is a domain's through its application). Schema at 0008 with the two columns and indexes. schema-migrations row 8, CHANGELOG [Unreleased], audit plan line ticked, roadmap 19/62. Evidence: go vet ./... clean; go test ./... ok locally but for the two Windows-only tests; the server run follows before the push. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
f9e75de8d1 |
store: users saved in one transaction, the last global kept inside it (audit M7, M9)
M7: DeleteUser counted the global users and then deleted; the handler's demotion and CreateGlobalUser checked and then wrote. MaxOpenConns(1) serialises statements, not pairs: two globals deleting or demoting each other at once could leave none. Now: - DeleteUser: a transaction that deletes first (taking the write lock) and then requires a global left (requireAGlobal) - ErrLastGlobal rolls back. - SaveUser: likewise for a demotion, the count inside the transaction after the write. The handler's early count stays only to answer before hashing a password; SaveUser decides, and ErrLastGlobal maps to the same message. - CreateGlobalUser: INSERT ... SELECT ... WHERE NOT EXISTS (SELECT 1 FROM users), one statement. M9: submitUserUpdate made five writes in a row (UpdateUser, sessions, SetUserRole, ClearUserReach with its error only logged, SetUserReach). store.SaveUser(UserChange) writes name, hash, e-mail, role and reach in one transaction (a global user's reach cleared); sessions end after it commits. The create path had the same flaw - user, reach and then e-mail in three writes - and now goes through AddUser, one transaction; CreateUser stays as a wrapper for its many test callers. SetUserRole is gone; writeUserReach is the reach write inside a transaction. Tests: store - two globals demoting, and deleting, each other from two goroutines: exactly one refused, one global left; a refused SaveUser (taken name, a reach to no domain, nothing assigned) changes nothing; promoted to global loses the reach; AddUser with a bad reach leaves no user; four setups at once create one user. Handlers (the users pages, direct): the whole change saved, back to domain with a reach; the last global not demoted and the typed rename not written; a domain user with nothing assigned refused, nothing changed; create with e-mail and reach. CHANGELOG [Unreleased], audit plan lines ticked (two), roadmap 17/62. Evidence: go vet ./... clean; go test ./internal/store ok; the users tests of ./internal/web/handlers ok; the server run follows before the push. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
60c7b85f84 |
findings of the reviews of audit stage 1
test / test (push) Canceled after 0s
Technical review (Opus) and security review (Fable) of 9efc9c7..a59e3d4; reports in the session's scratchpad. Fixed: - B1 (verified bug): store.UpdateStatus read before writing in its transaction; a commit by another connection in between (the dmarc-ingest process opens the same file) failed it at once with "database is locked" and the delivery line was lost. The first statement is now a write. - R3: a delivery line updated every row of its queue id and recipient; it now updates only the newest (Postfix reuses short ids). The sweep closes by row id (QueuedDelivery.ID, CloseUnreported(id)). - R4: a contradicted sweep keeps a mark, reason "reconcile-contradicted", instead of losing which row it was. - R1: contradicted cannot see a lost line (never read late). New counter reconcile_missed: at close, the sweep looks for the row's delivery line in mail.log and mail.log.1 (QueueLines). 0007 edited - it has run on no database but throwaway stands. - R2: queued_over_lifetime cannot measure "what removing the sweep would leave" while the sweep runs; its text now says rows stuck despite the sweep, and the rule uses closed - missed - contradicted. - cert-reload (R5, R6, R7, security medium/low): both files copied to .new and the copies checked as a pair before both are renamed; acts on the copy only when postconf says Postfix reads it; a failed reload is retried next pass; umask 077; says so when the mounted files cannot be read. The e2e case asserts Postfix reads the copy, the copy equals the mount, the key is 600 root. - Security low: a recipient with a quoted local part - the journal cut "a b"@x at the space, deliveryRe cut "a>b"@x at the ">" - matched no delivery line and was closed by the sweep. cleanAddress ends a bracketed address at the first ">" outside quotes; deliveryRe takes the recipient up to the ">, " before relay= (test fixtures given the relay= every real delivery line has). - Security low: postqueue -p's error carries at most 512 bytes of output. - Nits: addDeliveryLogDay refuses a column not on its list; the truncation test checks its message. - To stage 2b (page wording, mockup-first): the history step of a bounced row says the receiving server refused it, false for a row the sweep closed. To the owner when stage 2b is reached: since M13 the "deferred" figure counts whole messages too, which "Connections turned away" would not name. Found while verifying: the e2e's main positive path failed once with "553 not owned by user app1" - an smtpd idle from before the panel's reload took the connection in the reload's second. Measured on the stand (one-off probe, not committed): sending 0, 10, 40, 110 s after the save (two seconds at the soonest) always met an smtpd started after the reload. The e2e now waits for the sender map after each application it creates (waitForSenderMap: AUTH, MAIL, RCPT, RSET - no message, no row), and the level-1 case uses it instead of its own loop. Docs: architecture § Queue reconcile, schema-migrations (rows 7 and 8, chain head 8), CHANGELOG, audit plan (stage 1 note, the measured window, a new stage 2b line: 62 lines), roadmap 15/62. Evidence on the test server for this tree: go vet clean, go test ./... 23 packages ok, make e2e exit 0 (renewed certificate, hung panel, level 1 at 49/60). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
f51f5db245 |
app: logins folded to lower case, unique without regard to case (audit H4, 0008)
Postfix's reject_sender_login_mismatch compares the SASL login with the sender map without regard to case - seen on the e2e stand this time (a one-off probe, not committed: map rewritten to "APP1", client authenticated as "app1", RCPT accepted). The panel stored logins as typed under a BINARY UNIQUE, so "Ops" and "ops" were two applications to the panel and one sender to Postfix: a tenant could send with another tenant's envelope sender. - app.foldLogin: Service.Create lower-cases the login (owner: fold, do not refuse); CreateWithSettings rolls back the stored (folded) login. - ImportApplication keeps the login as written: folding it would rename the SASL account and break the imported application's working credentials; the index below refuses a case clash there too. - Migration 0008 (DDL): CREATE UNIQUE INDEX idx_applications_login_nocase ON applications (login COLLATE NOCASE). The column's own BINARY UNIQUE stays (SQLite cannot change a collation without a table rebuild, which a migration transaction cannot do with foreign keys on). Checked on the live installation first: 4 logins, no case clash; "Quieter3C" keeps its case. 0008 is not run anywhere yet; send_log.domain_id joins it later in stage 2. Tests: "Ops" created as ops, SASL account and map binding in lower case, OPS in another domain and an imported oPs refused; the store refuses ops beside Ops; schema at user_version 8 with the index. CHANGELOG [Unreleased], audit plan line ticked, roadmap 15/61. Evidence on the test server for this tree (with the probe): go vet clean, go test ./... 23 packages ok, make e2e exit 0. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
ffefa9d6df |
delivery log: measure the sweep before deciding its fate (audit H3, 0007)
Migration 0007 (DDL only): delivery_log_days, a row per UTC day, kept a year, shown nowhere - read off a copy of the database after a month by the decision rule written in the audit plan. - reconcile_closed: the sweep adds the rows it actually closed. - reconcile_contradicted: store.UpdateStatus, in one transaction, counts the rows with reason "reconcile" a delivery line now speaks of, writes the log's status and clears the reason - so a re-read line counts once. - tailer_blind_seconds: follow() tracks stretches in which the file is gone or reopening fails (logtail.blindness); stored when a stretch ends and every minute while it lasts; under 3 s not counted (the rotation's tick between rename and create loses nothing). - queued_over_lifetime: every sweep overwrites the day's level with the rows queued past LongestLifetime + MaximalBackoff (a message Postfix still works on stays queued until its first retry after the lifetime). - retentionLoop prunes days older than a year. Tests: store (sums per day, the level overwritten, under a second nothing, prune; a contradicted sweep counted once and its reason cleared; count of queued rows); logtail (the sweep counts what it closed; countStuck records the level; blindness - a one-tick gap not counted, 75 s stored as 60 + 15 from where the last part ended). Schema tests at user_version 7. schema-migrations.md: chain head 7 (it still said 5 since 2.4.0), row 7. CHANGELOG [Unreleased], audit plan line ticked, roadmap 10/61. Evidence: go vet ./... clean; go test ./internal/store ok, ./internal/logtail ok but for TestFollowTailsAndRotates (Windows); the server run of the stage follows before the push. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
9adb44845c |
logtail: the sweep closes only queued rows, with reason "reconcile" (audit H3)
reconcile() closed a row through UpdateStatus (WHERE queue_id AND to_addr), which could overwrite a "sent" the tailer wrote between the listing and the close, and rewrite an old row of a reused queue id. store.CloseUnreported sets status bounced and reason "reconcile" (store.ReasonReconcile; the 0006 column, no schema change) WHERE ... AND status = 'queued'; the sweep counts rows actually closed. Tests: store - a queued row is closed with the reason, a sent row is left alone (0 rows); logtail - the sweep's close goes through CloseUnreported. CHANGELOG [Unreleased], audit plan line ticked, roadmap 9/61. Evidence: go vet ./... clean; go test ./internal/store ok, ./internal/logtail ok but for TestFollowTailsAndRotates (Windows rename of an open file, fails here always); the server run of the stage follows before the push. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
c817f0833c |
from-header-binding: what the reviews had left as found, and address extensions
test / test (push) Canceled after 0s
The owner on the three things the reviews' commit left as found: can they be fixed? They can. - Downtime that crossed a UTC midnight was all booked on the day of the restart: it is cut at the midnights between (byDay). - A message with the null envelope sender - a bounce an application writes itself - left a refusal row without a domain, which no domain administrator would see: the row takes the domain the login is bound to. - A log read again after an unclean stop counted its deferrals again: while the tailer catches up, a warning no later than the last one counted is passed over. The mark is kept to the fraction of a second the log gives. And on the check being stricter than Postfix for an address with an extension (invoices+x@ passed in the envelope, was refused in the header): it makes Postfix's second try now, the address without its extension. recipient_delimiter was the distribution's default; it is set in postfix-config.sh, since the check depends on it. e2e sends one through. Test server, this tree: go vet ok, go test 23 packages ok, make e2e ok (339 s). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
c171fb5bc7 |
from-header-binding: the sender check, what it costs, its pages; guide, architecture, security
test / test (push) Canceled after 0s
A message's From: line is held against the application that sends it, under the rule Postfix holds the envelope sender to. OpenDKIM chooses the key by that line, so until now an application could have mail signed as another domain of the server or as the server itself. The check (internal/milter/sender.go) - A role of the panel on a socket of its own (SENDER_CHECK_SOCKET), first in smtpd_milters and strict: default_action=tempfail. The journal milter keeps its socket and stays fail-open. postfix-wrapper waits for the new socket. - It reads no database: what an application may send as comes from Postfix's own sender_login_maps, what the server signs for from OpenDKIM's SigningTable. Both are read again when they change; one that cannot be read defers mail. - One From: field, one address, allowed by the envelope's lookup; then no other name of the SigningTable may appear anywhere in the raw line. Refused: 550 5.7.1 naming the line, reduced to printable ASCII. - A refusal is a send-log row with reason "from" and the header address (migration 0006), written by another goroutine and not waited for. The journal's refusals record their reason too (limit, client), and the notifier takes only a limit's. What it costs (docs/plans/from-header-binding.md, Statistics) - The role marks itself alive every 2 s; at start the gap since the mark is downtime, counted from Postfix's start if later and not at all when supervisord says Postfix is not running. - The log tailer counts the connections Postfix turned away: a warning that names the socket, then milter-reject "Service unavailable" from the same smtpd. Seen on the stand: the client is refused from CONNECT on and leaves at AUTH (454), so no MAIL line is ever written. - sender_check_days, a row per UTC day, kept a year. Pages - Health: the card "Sender check", the socket's row, and the cards layout - boxes numbered by importance in two stacks read in rows; the left stack polls, the three readings of the right one are swapped in by id. - Outbound log: a refused row says why in its tag (wrong From, wrong client, rate-limited); the message's page shows the From: line and what the application may send as. - Help: topic "Sender check", word for word the mockup's. Found by the stand, fixed here: the names for the second look came from the sender bindings, and a domain with a key and no application yet was not among them. e2e: negative_journal_milter_fail_open is gone - it proved that mail passes with the panel down, which is no longer so. In its place sender_check_holds_the_from_line (another domain's From:, the hostname's, a stranger's, an address off the list, another sender in the display name - refused; own addresses - delivered) and panel_down_defers_mail (4xx with the panel stopped, the container alive, mail again after, downtime and one deferred message on Health, the card warning). Test server, this tree before the last cosmetic edits (a fixture row, a fact's size, docs): go vet ok, go test 23 packages ok, make e2e ok (337 s). Locally after them: internal/web/view ok. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
f09b60aaa2 |
panel-notifications: findings of the technical and security reviews
test / test (push) Canceled after 0s
Neither review (read-only agents, Opus and Fable, over 972a9f8..400aa76) has a Critical finding. Both found the same serious one, and more: - The notification about refused mail was built on what a rejected row says of itself. Its domain is the one in MAIL FROM, which the client typed and Postfix has not yet held against the login when the milter refuses: an application over its limit could have had the panel write a message per made-up domain, to another tenant's users among others. And the same status is written when an application is refused for its client address, which is no limit. Refusals are now counted by the domain the login is registered under, only for logins that exist and only while a limit is set on the login or its domain; one subject per sending domain. They are read through a partial index of their own (migration 0005): the query walked the whole send log every minute. - Account and user e-mails were checked with the DMARC report validator, which refuses Gmail and the like - the owner's own kind of address. A new validate.AccountEmail accepts them and refuses a local part beginning "-". - "Said" now means sent: what arises while nobody can be told, or while Postfix does not take the message, is told at a later check. Its ending with nobody left to tell is simply over. - Two DNS checks must be 45 minutes apart as well as two: the last check before a restart and the first after it were minutes apart. - The notifier's own mail waiting in the queue, and its bounce coming back to postmaster@ this server, are not the queue's subject. A listing cut at its size limit or with a line too long to read is no listing; postqueue -j gets 30 seconds. - The tables must name the selector the panel shows, not only have the line. - An a/mx lookup that did not answer inside the SPF check made the record "not authorising"; it is "cannot tell" now, for the pages too. - A ceiling of 60 messages an hour; a pass stops between domains when the process is asked to stop; sendmail gets a WaitDelay; days are rounded as a person counts; a failed read of the switch shows it on, not off. Recorded as accepted in security.md, with a roadmap candidate (from-header-binding): an application can have a message signed as the server's own name - or, as always, as another registered domain - by writing it into the From: header, which nothing holds against the login. Left as found: a recipient whose copy failed while another's went out is not tried again; a certificate that lives under 14 days is reported at each renewal. On the test server, for this tree: go vet clean, go test ./... 23 packages ok, make e2e ok (326 s). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
06ad174fb9 |
panel-notifications: schema and store
Migration 0004_notifications.sql, DDL only: users.notify, a user's own
switch, on by default; notify_state, one row per subject the panel has
written about (dns:<domain>, cert, queue, limit:<domain>:<login>), so that
each thing is said once and a restart says nothing again.
Store: the instance switch as a settings key, on unless turned off;
SetUserNotify; NotifyRecipients - global users for everything, domain users
for the domains on their list or all of them, only with an e-mail and their
switch on, a shared mailbox once; the state's get, set, delete and list by
prefix; LimitRefusalsSince, the mail refused under a level-2 limit per domain
and application.
Nothing is sent yet. Checked on Windows: go vet clean, go test
./internal/store passes with the schema test at user_version 4. The page
guards fail from the design commit
|
||
|
mixandClaude Opus 5.5
|
a990e7cc23 |
delivery-log-storage: findings of the technical and security reviews
test / test (push) Canceled after 0s
Neither review (read-only agents, Opus and Fable, over ae06d8b..815236a) has a Critical or High finding. What they found and what was done: - A stranger on port 25 could grow the table: every queue-id line of inbound mail was stored and pruned an hour or more later, his own message-id among them. The tailer now leaves out the lines of a queue id that postfix/inbound/smtpd opened, until qmgr removes the message or another listener opens one under the id; 4096 such ids are remembered. - A commit, so a disk sync, per stored line on the connection the journal milter shares, and a backlog written line by line. Lines are now written in one transaction per pass over the log, 500 at most, before the read offset is saved (InsertSendLogLines; follow() calls the keeper's flush). - The prune asked the send log once per line and ran hourly. It asks once per queue id and runs at start and with the six-hourly sweep; with port-25 mail left out there is little without a row to wait for. - The 4096-byte cut could split a character; it keeps characters whole. - security.md did not say that a backup now carries these lines, and the plan said the time window excludes a reused queue id where it only limits the chance to the row's queue lifetime. Both are corrected; the collision is recorded as an accepted risk with its trigger. - Tests that did not prove their comments: the prune is now tested with the sweep, a rejected row next to the prune, batching and the change from catching up to following, port-25 mail left out and its id reused. Left as found and written down in the plan: lines the tailer never reads (a file rotated away while the panel was down), and a message in the queue across the upgrade, which shows only its later lines. On the test server, for this tree: go vet clean, go test ./... 22 packages ok, make e2e ok. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
3d17206063 |
delivery-log-storage: the table for a message's log lines
Migration 0003_send_log_lines.sql, DDL only: queue id, the line's own time, the line. No reference to send_log, because a message's first lines are logged before the journal milter writes its row and one queue id is several rows. Store methods: InsertSendLogLine; InsertSendLogLineOnce for lines the tailer reads twice after an unclean stop; SendLogLines, which gives a row the lines of its queue id dated from an hour before the row to the queue lifetime after it, so a later message under a reused id is not shown; PruneSendLogLines, which deletes lines whose queue id has no send-log row - the whole of the table's retention. A line is cut to 4096 bytes. Nothing writes or reads the table yet. Checked on Windows: go vet and go test ./internal/store pass, with the schema test pinning the new table, its index and user_version 3. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
89774ab847 |
inbound-antispam-panel: three things the reviews left as found
test / test (push) Canceled after 0s
The owner asked for them to be put right (2026-10-12).
- A refusal is not logged twice after an unclean stop. The tailer
saves its place every five seconds, so on start it reads some
lines again; for the lines it reads on start a row is written only
if the same row is not there already (store.InsertInboundSpamOnce:
same moment, client, sender, recipient, decision, engine, detail).
Lines read as they are written are always new, so two identical
refusals in one second stay two rows.
- The Inbound log offers Deny / Allow sender only for a sender the
lists would take (inbound.Listable): an envelope sender may be
spelt in ways the form refuses, and the link led to a refusal.
- A network of one address is stored as the address: 192.0.2.7/32
and 192.0.2.7 were two entries of one list.
Checked on the test server, uncommitted tree: go vet ./... ok,
go test ./... ok (22 packages), make e2e ok.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
c731a98a0f |
inbound-antispam-panel: findings of the technical and security reviews
test / test (push) Canceled after 0s
Steps 11 and 12 of docs/plans/inbound-antispam-panel.md: 12/12. Two
read-only reviews of d65d632..HEAD by different models (Opus,
technical; Fable, security), each given the code and questions, not
conclusions. Nothing Critical or High in the feature; the High the
technical review found outside it is the commit before this one.
Log tailer (internal/logtail/inbound.go):
- the reply of a refusal ends at the first "; from=<", Postfix's own,
and the HELO name after it is whatever is left. Taking the longest
reply let a HELO name that spelt "; from=<..> to=<..> proto=.."
supply the row's sender, recipient and reply - and so make a
refusal read as the deny list's;
- an address with a quote, a bracket or a space is not kept: a quoted
sender could otherwise supply the recipient;
- the journal is cut to its row cap every 500 rows written, not only
every six hours;
- a queue id is forgotten when the message is queued or the id is
opened by another listener, and a stale place in the queue of
arrivals no longer drops a live id;
- milter-hold lines are not read: the held message reaches the
journal milter, which writes its row - it was written twice.
Lists (internal/inbound/lists.go): a change of the table and the
rewrite of the files are one step under a mutex; a failed rewrite puts
a removed entry back and rewrites after taking a new one out.
Store: the row cap removes the oldest by time, as the page orders them.
Page: on a sheet a refusal's text is a Reply whatever it starts with.
Help and the guide say that an allow entry for a sender address trusts
an address anyone can claim (design commit before this one).
docs/security.md: the two reviews; the roles table gains Inbound > Log
and Filter lists; Mail path describes the milters, the tailer and the
lists; four accepted risks - the filter's verdict while it is down, an
allow entry by sender address, the list files' mode, log rows held by
domain name. The plan's stale lines (size and rate refusals, who reads
the journal) are corrected.
Left as found, told to the owner: the journal's rows after an unclean
stop may be written twice (the tailer saves its place every five
seconds); a "Deny sender" link is offered for an address the form then
refuses; 1.2.3.4 and 1.2.3.4/32 are two entries.
Checked on the test server, uncommitted tree: go vet ./... ok,
go test ./... ok (22 packages), make e2e ok.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
7192c3861e |
inbound-antispam-panel: Filter lists, kind column, matches, note on a sheet
Follows the design commit before it (owner's words quoted there). The lists' tables are Value, Kind, Matched and Remove. The kind tag opens the entry's sheet: note, day added, how often it decided a message in the days the log keeps, and the last match. Matches are read off the journal on each view, nothing is stored (inbound.Lists.Usage, store.ListSpamListHits). A row counts for an entry when the list decided the message - a rejected row whose reply is the deny rule's message, an accepted row whose verdict carries the allow rule's symbol for that kind - and the entry fits the row's sender or client address the way rspamd matches it: an address whole, a domain as the sender's domain, a network containing the client (an IPv4-mapped address as IPv4). A failure to count shows the lists with "never" and logs why. For that the journal milter keeps the lists' own symbols ahead of its six-symbol cap: rspamd writes symbols heaviest first, so an allow entry's -100 came last and was cut behind any six others. The plan gains "Filter list usage": what counting from the journal implies, and - the owner asked for it in writing - the conditions under which a counter kept with each entry becomes worth a migration (the journal cut by its row cap and not by age; a short retention; counts that must outlive the journal; a slow page). multimap.conf says which of its texts SelfPost reads back. Tests: Usage over every kind on both lists and the rows that are nobody's; the milter's symbol order; the store query; the page and its sheets; a handler test from journal rows to the numbers on the page. Seen: the fixture page with a sheet open, headless Edge at 1360 px - the same as the accepted drawing. Checked on the test server, uncommitted tree: go vet ./... ok, go test ./... ok (22 packages), make e2e ok. Not seen in a real run: a count above zero. It needs an entry added in the panel, which I cannot sign in to, and then mail that the list decides; in particular the deny rule's message arriving in mail.log as the reply of a milter-reject line is what the trial with rspamc showed, not yet what Postfix logged. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
56c5dfee40 |
inbound-antispam-panel: Inbound > Log and Inbound > Filter lists
Step 6/12 of docs/plans/inbound-antispam-panel.md. Written by a Sonnet
subagent from the mockups, reviewed and corrected by me.
GET /inbound/log - the journal a page at a time (50), filtered by
domain, decision and day; QueryInboundSpam / CountInboundSpam with the
viewer's inbound domains as the scope. The global role reads all of it
and gets "Deny sender" / "Allow sender" links into the lists; a user
with the domain role reads the rows of the inbound domains assigned to
them, without the links. The plan said global-only for the journal;
the accepted mockup and 2.0's delegation of Inbound say otherwise -
recorded in the plan as built.
GET, POST /inbound/filter-lists and POST .../{id}/delete - global role,
404 otherwise. Add form (prefilled from the query), the two lists with
Remove as the kit's row action, and "Where the lists go" with the
filter's state and when the maps were last written
(Lists.LastWritten). A refused or duplicate entry is 422 with the
message and what was typed.
Server > Settings: "Keep inbound log rows, days" with the relay on.
Help: Inbound log, Filter lists. Navigation: Log for everyone who sees
Inbound, Filter lists for the global role (Shell.ShowFilterLists).
Status tags accept / reject / tempfail join the kit's mapping.
Tests: page fixtures for both screens, held to outlines.json; view and
handler tests (both roles, filters, paging, relay off, add / duplicate
/ invalid / delete, map file content, settings field, help). e2e reads
the journal from the page instead of the database and adds and removes
a deny entry through the panel, reading deny_domain.map after each.
Seen: both pages and Settings rendered from their fixtures and compared
with the mockups side by side (headless Edge, 1360 px) - same layout
and wording.
Checked on the test server, uncommitted tree: go vet ./... ok,
go test ./... ok (22 packages), make e2e ok.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
eea40bcd49 |
inbound-antispam-panel: filter lists, written as rspamd maps
Step 5/12 of docs/plans/inbound-antispam-panel.md.
Store: AddSpamListEntry, ListSpamListEntries, DeleteSpamListEntry.
internal/inbound/lists.go validates and normalises an entry - sender
address, sender domain, client address or network (canonical text, an
IPv4-mapped address as IPv4, /0 refused) - and writes the lists as six
map files under /data/antispam (ANTISPAM_DIR), each atomically, 0644 in
a 0755 directory: the filter is another user in another container. All
six are written on every change and on every start with the relay on,
empty ones included. An entry whose maps could not be written is taken
back out of the table. The writer refuses a stored value with
whitespace, a newline or # in it.
The plan's allow.map / deny.map became one file per list and entry
type: to rspamd an IP map and a sender map are different map types.
deploy/antispam/rspamd/multimap.conf holds the rules; the fragment
mounts it and ./data/antispam into the sidecar. Deny is a prefilter
reject, allow a symbol weighing -100. Tried in a throwaway rspamd 3.11
container on the test server:
- with allow as a prefilter accept, an address on both lists was
accepted and an IP on both was refused - the rule that ran first
decided; with the weight, deny won in all five mixed cases;
- IPv4, IPv6, address (any case), domain (not its subdomains) match;
- a rewritten file is reread in about ten seconds, no restart;
- files that appear after rspamd started are loaded the same way.
No page edits the lists yet (step 6).
Checked on the test server, uncommitted tree: go vet ./... ok,
go test ./... ok (22 packages), make e2e ok - with the relay on
/data/antispam is 755 and holds the six maps, 644, empty.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
27fd355e53 |
inbound-antispam-panel: refused inbound mail from mail.log; retention
Step 4/12 of docs/plans/inbound-antispam-panel.md. The log tailer writes an inbound_spam_log row for mail port 25 refused (internal/logtail/inbound.go): a "reject:" line of the port-25 smtpd is Postfix's own policy; a milter-reject / milter-hold / milter-discard line of cleanup is the filter's verdict. Only a recipient at an inbound domain is a row, so "Relay access denied" for a stranger's domain is not. The row is dated by its log line; the reply text is cut to 255 bytes of printable ASCII; a reply starting with 4 is a tempfail. To tell port 25 from 465 / 587 the listener now logs as postfix/inbound (syslog_name). cleanup logs under one name for every listener, so its verdict counts only for a queue id the port-25 smtpd was seen to open (4096 remembered). Lines are matched from the head, after timestamp and host: their tail is the sender's own text. Retention: PruneInboundSpam every six hours - older than the inbound_spam_log_retention_days setting (seeded from INBOUND_SPAM_LOG_RETENTION_DAYS, 90, range 7-365), then down to 10 000 rows. The setting has no field in the panel yet. Known limits, in architecture.md: a log line names one recipient, so a message refused at end-of-message is one row; a line re-read after an unclean stop would be a second row. Checked on the test server, uncommitted tree: go vet ./... ok, go test ./... ok (22 packages), make e2e ok - the unknown recipient at the inbound domain refused on port 25 has its row (reject by postfix), the stranger's domain has none. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
28ec784ae2 |
inbound-antispam-panel: inbound journal milter on port 25
Step 3/12 of docs/plans/inbound-antispam-panel.md. The panel serves a second milter while the inbound relay is on (internal/milter/inbound.go, socket INBOUND_JOURNAL_MILTER_SOCKET, default /run/selfpost/inbound-journal.sock). build/postfix-config.sh puts it last on port 25, after the optional antispam milter, with default_action=accept; postfix-wrapper.sh waits for its socket. At end-of-message it writes one inbound_spam_log row per recipient at an inbound domain - other port-25 recipients (DMARC report addresses) get none - and always accepts. With a filter attached it reads the verdict from X-Rspamd-Action and X-Spamd-Result (action, score, up to six weighted symbols, only what the patterns recognise, 255 bytes); without one those headers are the sender's and are not read. The plan named X-Rspamd-Score, which rspamd does not have. The antispam compose fragment mounts rspamd/milter_headers.conf into the sidecar so that it adds the two headers (checked in rspamd 3.11: both routines exist and remove a sender's own headers of those names). Store: InsertInboundSpam, IsInboundDomain. Checked on the test server, uncommitted tree: go vet ./... ok, go test ./... ok (22 packages), make e2e ok - the relayed message of inbound_relay_delivers_and_refuses has its journal row (accept by selfpost) and the DMARC report sent through the same listener has none. Not yet seen in a real run: a verdict written by rspamd reaching this milter. The e2e stand has no filter, and the test server's only inbound domain has no upstream, so it accepts no mail. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
a3cc52d6d4 |
inbound-antispam-panel: migration 0002, journal and filter-list tables
Step 2/12 of docs/plans/inbound-antispam-panel.md, the first migration after the 2.0 baseline (2.0.1 was cut before it, as agreed). 0002_inbound_spam_log.sql adds inbound_spam_log (one row per recipient: domain, client IP, envelope, subject, decision, engine, detail) with indexes on created_at and (inbound_domain, created_at), and inbound_spam_list (allow / deny entries, unique per list). DDL only; decision, engine, list_type and entry_type carry CHECKs, as the baseline does for its own enumerations. Nothing reads or writes the tables yet. Tests: TestBaselineSchema pins both tables and user_version 2; TestOpenMigratesA20Database opens a file holding the baseline alone and finds its user kept; TestInboundSpamConstraints. go test ./internal/store/ ok; go vet ./... ok. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
4dd46ea355 |
dmarc: a report is bounded, kept per domain, and ingested one at a time
Security review of the DMARC report path (Fable, 2026-10-11), which ran for the first time in 2.0.0. No Critical or High finding. Fixed: - Medium: a report was bounded only as 8 MiB of XML - some 160 000 records or one name of megabytes, all of it rows and table cells. At most 5 000 records (more is ErrRejected, dropped), text fields cut to 255 bytes on a character boundary, a record's count capped. - Medium: the cap of 500 reports was for the whole server, so a stranger filing under one domain's address evicted every other domain's reports. PruneDMARCReports counts per domain. - Low: the pipe service ran up to default_process_limit (100) commands at once against the panel's database; maxproc is 1. - Low: the reason logged for a dropped message carried the sender's bytes (header line, zip entry name) as they came; cut to 200 bytes and reduced to printable ASCII, zip entry names quoted. - Low: SELFPOST_DATA_DIR / SELFPOST_DB_PATH with whitespace or "$" would reach the command through export_environment as another path; refused at start when DMARC ingest is on. Left as they are, told to the owner: the parse-failure count is a lifetime figure shown under "This week"; a report larger than the command reads is dropped as unreadable; nested multipart is not searched. The hub's Retention line follows the design commit before this one. security.md: the review, and the accepted-risk entry says what a stranger can and cannot do now. The roadmap no longer calls the review pending. go vet ./cmd/... ./internal/dmarc/ ./internal/store/: ok go test ./cmd/... ./internal/dmarc/ ./internal/store/ ./internal/web/...: ok make e2e on the test server (with the port-25 scenarios of the next commit): ok Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
mixandClaude Opus 5.5
|
96db0b7a86 |
panel-redesign: three choices for a domain's report address; row actions
Follows the design and guard commits before it. Written by Sonnet,
reviewed by Opus.
The report address
- Baseline: users.dmarc_default_mode, users.dmarc_default_address and
domains.dmarc_rua_user_id are gone. domains.dmarc_rua alone says
where reports go: '' is no reports (a new domain), the address
SelfPost derives for the domain is the hosted choice (while hosted
reports are on), anything else is a typed address.
- Removed: the user default and its store functions, a domain
following a user, keep / inherit, followCreator, POST /account/dmarc
with its handler, the DMARC box of Account, the user-delete item
about domains losing their address.
- Domain settings offers the three choices; beside the typed address a
"Use my e-mail" button fills in the profile e-mail (panel.js: one
generic data-fill hook; absent without a profile e-mail; it fills,
it does not save).
- The DMARC record's note names the address and no user. This closes
L4 of the security review.
- Domain export / import carries the address as a plain string.
- The ingest allow-list is the generic mailbox plus each domain's
address on this host; the generic mailbox is always open now.
- dev/migrate1x (not in the tree): a 1.x domain that inherited the
instance default gets that address as its own, so no published rua=
changes.
Row actions
- row_action partial (RowAction: Label, Post, Confirm, Danger);
panel.css has the mockup's three rules. A row of the Applications
table is Edit, New password, Delete; the confirmation texts are the
ones the application page's head uses. Both roles, with the checks
of the application page.
Tests cover: a new domain has no reports; each choice saved and shown
selected; hosted refused when hosted reports are off; a bad address
refused with what was typed kept; an untouched save changes nothing in
each state; the fill button with and without a profile e-mail; deleting
a user leaves every domain's address; the row's forms, targets and
confirmations for both roles and a 404 for a stranger.
Known: if hosted reports are switched off later, a stored hosted address
reads as a typed one. docs/guide.md still describes the old choices -
the documentation step.
Evidence
- docs/assets/panel-redesign/evidence/account.png,
out-domain-settings.png, out-domain.png, user-delete.png, help.png:
1440 px wide, headless Edge, real templates served locally with
their fixtures - NOT from the container.
- panel/audit.js on out-domain, out-domain-settings, account, help,
components and user-delete at 1440 and 1280: 1420 texts checked,
problems: [].
- In a browser: the fill button sets the field and does not submit;
the row buttons have the font, size and colour of the Edit link,
Delete the red of the other delete links; data-confirm fires on
both. Hover and focus states were not observed.
- go test -count=1 ./internal/web/... ./internal/store/...
./internal/dmarc/... ./internal/app/... ./internal/inbound/...
./cmd/panel: ok (ten packages; dev/migrate1x also ok).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
b2fbe91de9 |
panel-redesign: security review of 2.0 - sessions belong to a user by id
Stage 3, step 2. Reviewed by Fable (read-only), fixed by Sonnet with a
failing test before each fix, checked by Opus. No Critical or High
finding: route authorization, tenant isolation by id, the /server/
subtree guard, output encoding and the origin check were found sound.
Fixed
- M1: a session was keyed by user name and had no link to the user. A
deleted or renamed user's cookie stayed alive (renewed on every hit,
before the user was looked up) and became a session of whoever was
later created under that name, with that account's role. The
baseline now has sessions.user_id REFERENCES users(id) ON DELETE
CASCADE; the principal is resolved by id and a session is renewed
only after its user was found. RenameSession is gone.
- M2: any user's password change deleted every other user's sessions.
It ends that user's other sessions only.
- L1: a password set on the user form ends that user's sessions (an
administrator editing their own account keeps the current one).
- L2: store, saslpasswd2 and Postfix reload errors were shown verbatim
on the application form, the inbound upstream / recipients forms and
the limit recalculation - pages a domain administrator reaches.
Validation errors (app.ValidationError, inbound.ValidationError,
store.ErrNotAutoRateLimit) keep their text; anything else is logged
and shown as "Could not save ... Check the logs and try again."
- L3: store.ListDMARCReports treated an empty domain list as "all". It
takes a scope now (AllDomains or a list; an empty list is no rows),
and the DMARC hub is open to the domain role as the plan says: the
reports of the assigned domains, without the instance-wide ingest
box. The menu entry was already shown to them and led to a 404.
- I1: /static/ answered with a listing of the embedded assets. A path
that is not a known asset is a 404.
Consequences
- The global DMARC hub lists reports of domains that were deleted
since, too.
- dev/migrate1x (not in the tree) no longer carries sessions over:
everyone signs in again after the transfer.
- docs/schema-migrations.md: the sessions row.
Recorded, not changed - for the owner:
- L4: the report-address select names the followed user and their
address to every administrator of the domain, by default the global
administrator's login name. The plan asks for it.
- L5: a delegated inbound upstream may be any host and port, loopback
and private ranges included - within the trusted-operator model; to
be listed among the accepted risks in security.md.
- L6: Account's profile is saved without the password; becomes a
requirement once password-reset mails to users.email.
- Still echoing an error's text: backup and domain import (global
only), the domain form's validation messages.
Not checked by the review: anything needing the container (e2e, real
Postfix / DNS), CSP behaviour in a live browser.
go test -count=1 ./internal/web/... ./internal/store/... ./internal/app/...
./internal/inbound/... ./internal/dmarc/... ./cmd/panel
ok (all eleven packages; dev/migrate1x also ok)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
3b86f6c3b6 |
panel-redesign: inbound is delegated per user, separately from outbound
Stage 1, step 2 (plan § Who sees what).
Store
- Reach{AllDomains, DomainIDs, AllInbound, InboundDomainIDs} is what a
domain user is assigned. CreateUser takes it; SetUserReach / ClearUserReach
replace SetUserDomains / ClearUserDomains and write both directions in one
transaction. A domain user with nothing on either list is refused
(ErrEmptyReach). With All set the rows of that direction are not stored,
so clearing All later brings nothing stale back.
- ListDomainsForUser honours all_domains; ListInboundDomainsForUser is its
inbound twin. Both filter in the query.
Authorization
- auth.Principal carries the whole reach: CanAccessDomain (now also true
with All), CanAccessInboundDomain, HasOutbound, HasInbound. An id or a
name on one list opens nothing on the other.
- Inbound handlers in three strengths: requireInbound (the list, filtered),
requireInboundDomain (one domain: page, DNS re-check, upstream,
recipients), requireInboundGlobal (add, delete confirm, delete). All
answer the same 404.
- domainIDSet and the DMARC report pages go through the principal instead
of looking at p.Domains themselves.
Panel (old templates, until stage 2)
- User form: two lists with All; inbound is offered only where the feature
is on, and saving the form with it off keeps the user's inbound reach.
Promotion to global drops the reach.
- Menu: a group with nothing assigned is absent; / sends an inbound-only
administrator to Inbound. The inbound pages hide add / delete from a
domain administrator.
Tests: every route of one inbound domain against five kinds of refused
request (another tenant's id, a missing id, outbound-only reach, an outbound
domain with the same id, one with the same name, no principal) with the 404
bodies compared; add/delete as every non-global user; the filtered list
including a domain added later; thirteen outbound routes against another
tenant's domain and application id; the user form; the reach in the store;
the principal matrix; the menu; the home redirect. Removing the access check
or the query filter makes the tests fail (checked by hand).
go test ./... green except the two Windows-only failures in internal/domain
and internal/logtail that predate this work.
Roadmap 12/27.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mixandClaude Opus 5.5
|
8d1af89e1a |
panel-redesign: the 2.0 schema from zero - one baseline, no 1.x chain
Stage 1, step 1. BREAKING: a 1.x database is not migrated.
Schema
- internal/store/migrations/ holds one file, 0001_init.sql, equal to the
2.0 schema; 0002..0010 are deleted (they stay in history at 1.9.5). No
admin table created and dropped, no ALTERs.
- users.email replaces users.dmarc_report_email: the address is the
user's own. The default DMARC report address is a user's setting
(dmarc_default_mode hosted/account/custom/none, dmarc_default_address);
the instance setting that mirrored the global user's field is gone.
- domains.dmarc_rua_user_id: a domain follows a named user's default, or
has an address of its own in dmarc_rua ('' = none). ON DELETE SET NULL
leaves it at "no reports", never at someone else's default.
- user_inbound_domains, users.all_domains, users.all_inbound_domains: in
the schema for the inbound delegation of the next step.
- users.role is 'global' / 'domain' (was 'domain_admin');
rate_limits.allowed_ips, unused since 1.9.0, is dropped.
Opening a database
- The baseline sets PRAGMA application_id ("SP20"). store.Open refuses a
file that has a schema version without it (ErrForeignSchema) and one
newer than the build. A 1.x file at user_version 10 would otherwise read
as already migrated. The refused file is left untouched.
Code
- Store.DomainDMARCRua is the one place a domain's report address is
resolved; dnscheck.ResolveDMARCRua and Store.GlobalDMARCReportEmail are
gone. dmarc.AllowedRecipients, the domain page, the dashboard and the
DNS re-check go through it.
- The old templates keep working on the new model until their pages are
restyled: the Settings form's address field is the account e-mail and
switches the user's default between it and none; a domain's "Same as
Settings" makes it follow the user who chose it; a new or imported
domain follows its creator.
- Domain export/import: a domain that follows a user exports no address.
Tests: the baseline pinned table by table (TestBaselineSchema), refusal of a
1.x and of a newer database, constraints and cascades of the new columns and
table, resolution in every default mode, the deleted-user case, and the three
bridged handlers.
docs/schema-migrations.md is rewritten for the baseline; roadmap 11/27,
schema-squash marked built.
go test ./... (Windows)
ok for every package except two that fail the same way before this commit:
internal/domain TestWriteLoadPrivateKeyRoundtrip (file mode on NTFS)
internal/logtail TestFollowTailsAndRotates (rename of an open file)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
mix
|
7ef7f75246 |
release: 1.9.2: Review pass: port-25 milters, DMARC validation, rate-limit fix
Review pass over `1.4.0`…`1.9.1`: port 25 no longer shares the submission milter chain, DMARC reports are validated before they are stored, and the auto rate limit is correct for a non-default level-1 window. Schema migration `0010` (index only). Upgrading is a tag bump. Added: - SQLite migration `0010_send_log_app_login_index.sql` — - DMARC aggregate reports are accepted as **zip** as well as gzip or plain XML - e2e: `checkPort25ConfigCombinations` regenerates the Postfix configuration Changed: - README hero line and a **Positioning** block in `docs/product.md` record the Fixed: - The setup account's password is hashed at bcrypt cost `12` like every other - Login/setup rate limiter: protecting blocked buckets from eviction is now - `postqueue -p` output is bounded to 4 MiB (the timeout alone left the size of - [schema-migrations.md](docs/schema-migrations.md): the schema section was - postqueue reader is now time-bounded: `postqueue -p` runs under a 5-second … (11 more in CHANGELOG) Changed: - [roadmap.md](docs/roadmap.md) now carries everything the 2026-08-19 code - Extracted `internal/configsafe` — the empty-value and forbidden-character - Build, deploy and migration comments no longer cite the archived - Dropped the `parseDomainRateLimitForm` / `parseAppRateLimitForm` pass-through - Extracted shared helpers: `internal/atomicfile` (atomic temp-write+rename) and … (7 more in CHANGELOG) Removed: - Unused legacy asset `docs/assets/icon.png` (superseded by the four brand SVGs - Plan documents for already-shipped features: `domain-stats-auto-ratelimit`, Full detail: CHANGELOG.md (1.9.2). |
||
|
mix
|
7b8685d038 |
release: 1.9.0: Per-application client IP allow-list and rate-limit overrides
Application sending controls: client IP allow-list for authorization, and level-2 rate limits that override the domain ceiling per application. Added: - Per-application **client IP allow-list** on the domain page: when enabled, - SQLite migration `0009_application_auth_ips.sql` (moves legacy trusted IPs Changed: - Application level-2 rate limit **overrides** the domain limit for that login - Domain export/import carries `auth_ip_restrict` / `auth_allowed_ips`; legacy - Panel help, Settings, and [guide.md](docs/guide.md) describe override semantics - [guide.md](docs/guide.md): full-backup section documents all four capture Full detail: CHANGELOG.md (1.9.0). |
||
|
mix
|
20d88e1d9c |
release: 1.7.0: DMARC aggregate report ingest and panel summaries
Optional DMARC aggregate report ingest: accept `rua=` mail on port 25, parse gzip/XML into SQLite, and show summaries in the panel. Added: - Optional DMARC aggregate report ingest (`DMARC_REPORTS_ENABLE`): port 25 - Per-domain **SelfPost hosted** `rua=` mode when ingest is enabled Full detail: CHANGELOG.md (1.7.0). |
||
|
mix
|
60b743e6c2 |
release: 1.6.0: 30-day send stats and optional auto level-2 rate limits
30-day sending statistics per domain and application, plus optional auto level-2 rate limits derived from average send rate. Added: - Domain page **Sending statistics** card: total messages, peak and average - Level-2 rate limit **Manual** / **Auto** mode on domain and application - Domain export JSON now includes rate limits (`mode`, `auto_multiplier`, Changed: - Auto mode uses the level-1 window (`RATE_LIMIT_WINDOW_SECONDS`); manual Full detail: CHANGELOG.md (1.6.0). |
||
|
mix
|
dca7d99c1b |
release: 1.5.0: Send-log retention configurable in panel Settings
Send-log retention is configurable from panel **Settings** (global administrator); `SEND_LOG_RETENTION_DAYS` seeds the initial default only. Added: - Panel **Settings** (global administrator): **Send log retention (days)** — Changed: - Deliveries list and delivery detail pages show the configured retention Full detail: CHANGELOG.md (1.5.0). |
||
|
mix
|
656c4d4d7f |
release: 1.4.0: Optional inbound relay (backup-MX) on port 25
Optional inbound relay (backup-MX / forwarder) on port 25, off by default. Mail is accepted only for domains configured in the panel and forwarded to an upstream; there are still no mailboxes. A dedicated security review of the inbound path is still open on the plan (Fable). Added: - `INBOUND_RELAY_ENABLE` (default `false`): when true, Postfix listens on - Panel **Inbound** pages (global administrator): domains, upstream host/port - Optional `INBOUND_ANTISPAM_MILTER` on the inbound listener only, plus - Inbound rate limit (`INBOUND_RATE_LIMIT_MESSAGES_PER_IP`, default 20) and Changed: - Compose publishes host port 25 even when the flag is off (nothing listens - Full-backup restore Resync also rebuilds inbound maps when the flag is on. Full detail: CHANGELOG.md (1.4.0). |
||
|
mix
|
0730b2090e |
release: 1.3.0: 1.3.0-1.3.1: security pass, queue persist, full backup layout
[1.3.0] Security and quality after 1.2.5: domain-admin send-log authorization, fail-closed sign-in and application delete, level-2 rate-limit race fix, restore Resync, expanded tests, operator docs, release CI, and OFL for IBM Plex. Upgrading from 1.2.x is a tag bump; no migration. Added: - licence: the SIL Open Font License 1.1 text now travels with the IBM Plex - docs: agreed roadmap item **queue-retries** — show this Postfix's retry Security: - The independent security review of the send-log authorization and Fixed: - test (e2e): send-log status scrapers follow the badge markup in - security (panel): the Deliveries list is scoped to a domain administrator's - mail (level-2 rate limit): the ceiling is no longer overshot by messages that - panel (sign-in): a session that cannot be written to the database no longer - panel (applications): deleting an application removes its SASL credentials … (2 more in CHANGELOG) Changed: - docs: operator and as-built docs aligned with the code after a full - docs: [guide.md](docs/guide.md) reorganised into **Installation**, **Instance - docs: the 2026-08-13 full-tree review plan is complete — every phase (P0–P7) - licence: [NOTICE](NOTICE) tells modifiers to update `SourceURL` in - ci: the release image is published only for a **published** GitHub Release … (9 more in CHANGELOG) [1.3.1] Retry policy in the panel, persistent Postfix queue, and self-contained full backups. Mail queue and delivery history show this Postfix's first retry, backoff cap, and queue lifetime. Deferred mail survives container recreate. Full backups now archive `data/`, compose, `.env`, and `certs/`; the archive layout breaks 1.3.0 flat backups (unpack those with `tar xzf backup.tar.gz -C ./data` as before). Upgrading from 1.3.0 is a tag bump; no schema migration. Added: - Mail queue and a delivery's history show this Postfix's retry policy - docs: **Plan checklists** in [development.md](docs/development.md) — format, - docs: **Implementation checklists** with model routing in - docs: roadmap candidates **send-log-retention** (panel Settings for delivery - Postfix queue under `/data/postfix/queue` — deferred and active mail survive … (1 more in CHANGELOG) Changed: - **Breaking:** full-backup archive layout — paths are prefixed with `data/`; - docs: operator guide, architecture, security, and backup UI updated for - docs: HTML mockups for a full panel UI refresh Changed: - docs: panel UI mockups after review — Status restored to live readings - docs: panel UI design system and mockups rebuilt as separate pages - docs: panel UI mockups — add-domain sits in the list card (Domains and Fixed: - ci (GHCR): per-arch package tags (`X.Y.Z-amd64`, `X.Y.Z-arm64`) are dropped Squashed CHANGELOG sections: [1.3.0], [1.3.1]. Full detail: CHANGELOG.md (1.3.0, 1.3.1). |
||
|
mix
|
60e08e802e |
release: 1.2.0: Panel 1.2.0-1.2.5: layout, RBAC, tests, GUI and CI fixes
[1.2.0] The second MINOR after 1.0.0: domain administrators with per-domain scope, a panel visual refresh on the SelfPost palette, and refinements to navigation and the send log. Upgrading runs one SQLite migration (`0005_panel_users`); the single administrator becomes a global user. Added: - panel: **domain-admin role** — global administrators manage panel users and Fixed: - Docker build: `LICENSE` is no longer excluded by `.dockerignore`, so the - panel: on signed-in pages with a narrow card (**Settings**, the user form) Changed: - panel: navigation session icons are distinct — **Settings** uses a gear, - panel: `/` redirects domain administrators to `/domains`; global users still - panel: **Sign out** in the navigation column uses the same type size and - panel: **visual style** brought in line with the SelfPost mark — brick accent - panel: the send log's **status is a badge**, in the same ok/warn/error/unknown … (1 more in CHANGELOG) [1.2.1] Panel refinements after 1.2.0: navigation icons, status-badge centreing, drill-down back-link placement, and safeguards for the sole global administrator. Upgrading is a tag bump; no migration. Fixed: - panel: status badge text sat low in the box (and below the heading or label - panel: the **Users** navigation icon was two full silhouettes with staggered - panel: the **Settings** navigation icon was a sun-with-rays (circle plus - panel: the user create/edit form placed «Back to users» at the bottom of the Changed: - panel: the user edit form disables role change and delete for the only global - panel: the user create/edit form hides **Assigned domains** when the role is - panel: **Settings** shows panel credentials and DMARC aggregate reports side [1.2.2] Status page layout after 1.2.1: paired cards in a wide column, denser machine and check copy, and a user-form checkbox fix. Upgrading is a tag bump; no migration. Changed: - panel: **Status** is wide again so paired cards fill the column. Layout: Fixed: - panel: cards inside `.split` used `margin: 0 auto`, which in a CSS grid - panel: on the user create/edit form, **Assigned domains** checkboxes stacked [1.2.3] Domain detail layout and panel polish after 1.2.2. Upgrading is a tag bump; no migration. Changed: - panel: the domain detail page is wide with paired cards (DKIM+SPF ‖ DMARC; - panel: Domains list — **Add domain** sits beside the domain field; the - panel: page URLs, browser titles, and headings are aligned — **Settings** is Fixed: - image: `mail.log` rotation no longer silently stops when the build context [1.2.4] Level-2 rate-limit semantics inverted after 1.2.3, plus a small DNS field height fix. Upgrading is a tag bump; no migration. Changed: - rate limiting (level 2): domain ceilings apply to every client IP (no IP Fixed: - panel: on the domain DNS status grid, the Type (TXT) field height matches [1.2.5] Rate-limit form polish after 1.2.4. Upgrading is a tag bump; no migration. Changed: - panel: rate-limit forms refined — level-1 backstop as muted copy on the Squashed CHANGELOG sections: [1.2.0], [1.2.1], [1.2.2], [1.2.3], [1.2.4], [1.2.5]. Full detail: CHANGELOG.md (1.2.0, 1.2.1, 1.2.2, 1.2.3, 1.2.4, 1.2.5). |
||
|
mix
|
f62fe23826 |
release: 1.1.0: Domain-admin role and internal/web package split
The first MINOR after 1.0.0: send-only DMARC guidance in the panel, AGPL packaging on every page, and an internal split of `internal/web` ahead of domain-admin work. Upgrading runs one SQLite migration (empty defaults; existing DNS guidance is unchanged until you set a report address). Changed: - `internal/web` split into subpackages (`web/view`, `web/auth`, `web/validate`, Added: - panel: DMARC guidance for send-only relays — the suggested `_dmarc` record - AGPL packaging hygiene: [NOTICE](NOTICE) names the copyright holder and the - [docs/roadmap.md](docs/roadmap.md) — candidate item **visual-style** (panel Full detail: CHANGELOG.md (1.1.0). |
||
|
mix
|
75207f0d1e |
release: 1.0.0: Public 1.0 image; delivery log; docs and SECURITY.md (incl. 1.0.1)
[1.0.0]
Added:
- A **Delivery log** on each delivery's page (`/deliveries/{id}`): the
- A **History** block on the same page: the journal's two timestamps stated as
Fixed:
- Postfix config: copy TLS cert/key from the (often `:ro`, host-owned) mount
- Postfix config: allow `maillog_file` under `/data` via
- E2e: read `/data/setup-token` via `docker compose exec` (file is `0600`
- Entrypoint: check `SELFPOST_HOSTNAME` before `/data` setup (so a bad identity
- E2e gate: wait for host-published `/healthz` before panel setup, and stop
… (3 more in CHANGELOG)
Changed:
- Document what `.spbk` and `.spde` stand for (SelfPost backup / SelfPost domain
- Docs aligned with the code: setup URL is `/setup/<token>` (README and
- Full backups no longer carry `/data/log`. It is Postfix's raw log plus its
- Monitoring screens (status, mail queue, system log, deliveries) use adaptive
- Documentation package consolidated into `docs/development.md`: Documentation
… (4 more in CHANGELOG)
[1.0.1]
A documentation and packaging release: no change to the mail path, the database, or the on-disk layout. Upgrading is a tag bump.
Added:
- `SECURITY.md` — how to report a vulnerability privately (GitHub private
- [docs/plans/](docs/plans/) — one document per agreed extension: the optional
Changed:
- The panel's **Account** entry is now called **Settings** — nav link, page
- The signed-in name in the panel's nav is now labelled `User:`, so it reads as
- [docs/product.md](docs/product.md) reframes the future line: the inbound
- [docs/security.md](docs/security.md) is now in English, matching the rest of
- The README documentation table now points at `SECURITY.md` for reporting a
… (2 more in CHANGELOG)
Fixed:
- The panel's static assets are served with a content ETag and
Squashed CHANGELOG sections: [1.0.0], [1.0.1].
Full detail: CHANGELOG.md (1.0.0, 1.0.1).
|
||
|
mix
|
83c488cc48 |
release: 0.6.0: Delivery detail page, DNS badge, machine metrics, wide layout
A page per delivery (`/deliveries/{id}`), reached from the *Details* link on
Added:
- A page per delivery (`/deliveries/{id}`), reached from the *Details* link on
- A **DNS** badge in the domain list, one per row, carrying the same
- Machine metrics on the status page: a **Machine** card reporting the
- An index of the current page's own sections in the navigation column, for the
Changed:
- Every panel page is laid out in one column of the same width, so moving
- The mark's small-size variant — the tab icon and the `SP` initials it
- The stamp's `SELF-HOSTED SMTP RELAY` line is set at 11.5/0.15 instead of
- The delivery log lists what identifies a message and nothing else: time,
- Subjects are decoded for display as well as on the way in, so the rows the
… (4 more in CHANGELOG)
Full detail: CHANGELOG.md (0.6.0).
|
||
|
mix
|
5e5d157496 |
release: 0.5.0: Pre-1.0 security review, domain-admin role, doc consolidation
A bounce could be recorded as a successful delivery. The log-tailer's Fixed: - A bounce could be recorded as a successful delivery. The log-tailer's - Log-tailer resumes where it stopped instead of jumping to end-of-file on - Level-2 rate limit no longer overshoots under concurrency: messages that Changed: - The project has a single public home: `github.com/mixeme/selfpost`. Codeberg - Code comments no longer cite the archived specification. References like - `docs/code-review.md` is gone. Its plan is finished — phases 0 (bar the - `docs/architecture.md` gained a *Code layers* section: a diagram of - Phase 1 doc/code hygiene (`docs/code-review.md`): removed ~30 stale … (1 more in CHANGELOG) Security: - Pre-release security review (plan § D, model Fable, 2026-08-06): full pass - `saslpasswd2` argv: the application login is now passed after a `--` Added: - Optional password encryption for the two secret-bearing downloads (plan - Domain import accepts an encrypted export: the envelope is detected by its - `selfpost-backup` writes encrypted archives and reads them back: - `TestParseDelivery` covers the exotic mail.log shapes the review asked for - docs: README *Encrypting a backup or export*; `docs/security.md` § … (14 more in CHANGELOG) Removed: - docs: `security.md` — accepted risk «restore old backup revives session rows» Changed: - docs: `implementation-plan.md` trimmed to the sole open v1.x gate — pre-release - docs: `architecture.md` — sessions (SQLite, idle renew, password change), - docs: `development.md` — expanded e2e stack and `release.yml` matrix workflow. - docs: `security.md` — accepted risk for send-log rows stuck at `queued` after - docs: `roadmap.md` — optional send-log / `mail.log` follow-ups under v1.x tail. … (10 more in CHANGELOG) Full detail: CHANGELOG.md (0.5.0). |
||
|
mix
|
8ce050ef7f |
release: 0.1.0: Phases 0-11: panel, Postfix/DKIM, milter, backup, Docker image
Initial feature-complete implementation of the v1.0 specification (phases 0-11 of `docs/implementation-plan.md`). Added: - Panel (Go, single static binary) with SQLite persistence, one-time - Domain management with per-domain DKIM (RSA-2048, generated in pure Go) and - Application (sender identity) management: SASL credentials via `sasldb2`, - Full Postfix relay config generated from env at container start: SMTPS 465, - Journal milter (pure Go, `go-milter`) recording every send to `send_log`; … (6 more in CHANGELOG) Full detail: CHANGELOG.md (0.1.0). |